PRODUCT FEATURES WV-7225 INDOOR PAN/TILT MECHANISM
ARCHITECTS AND ENGINEERS BID SPECIFICATIONS
The indoor pan and tilt mechanism shall be a Panasonic WV-7225 equal or better. The indoor pan and tilt mechanism shall operate ceiling mounted or inverted for bracket mounting. The connected camera shall pan on an angle from 20 to 340 at a speed of 6.6 per sec. and tilt from 45 up to 45 down at 3.3 per sec. Load weight less than 6.6 lbs. The unit shall provide manual panning, auto panning and random panning. The unit shall receive its power (24VAC 60Hz) and control signals from an indoor receiver (WV-RC100) and system controller (WV-CU254). When using the direct controller (WV-7330) no receiver shall be required.
TYPICAL SYSTEM CONNECTIONS

DIMENSIONAL DRAWINGS

Unit: inches (mm)
238 Pan/Tilt Mechanisms and Scanners

TECHNICAL SPECIFICATIONS

Model No. Power Source Power Consumption Panning Panning Speed Panning Angle Tilting Speed Tilting Angle Load Weight Operating Ambient Temperature Operating Ambient Humidity Dimensions (H x W x D) Weight
WV-7225 24VAC Approx. 6W Max. Automatic, Manual or Random (Selectable) Approx. 6.6/sec. 20 - 340 Approx. 3.3/sec. Up: Approx. 45; Down: Approx. 45 Less than 6.6 lbs. (3 kg) 14F - 122F (-10C - +50C)

ACCESSORIES

4P Connector for the Zoom Lens (Mas 4100) Connector (MX5557P06). (MX5557P10). Pan/Tilt Head Mounting Ring.. pc. pc. pc. pc.

OPTIONAL ACCESSORIES

Prewired Cable. WV-CA51 Indoor Receiver. WV-RC100 Controller.WV-CU254 Direct Controller (No receiver required).WV-7320 Indoor Housing. WV-7110, WV-7120D
Less than 90% Approx. 734" x 7116" x 738" (197 x 178 x 188mm) Approx. 6.6 lbs. (3 kg)
Weight and dimensions shown are approximate. Specifications subject to change without notice.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
1. Pan/Tilt Head Mounting Ring 2. Pan Limit Stops: Adjustable Panning Angle, 20 - 340 3. Camera Power Cable 4. BNC Type Coaxial Cable 5. Zoom Control Connector
6. Camera Mounting Screw 7. Camera Guide Pin 8. Camera Guide Pin Holes 9. Housing Mounting Hole 10. Camera or Housing Mounting Plate
11. Tilt Limit Stops: Adjustable Tilting Angle: Up: 0 - 45; Down: 0 - 45 12. Pan/Tilt Head Mounting Screw 13. Base Rear Cover Mounting Screw

14. 15. 16. 17. 18. 19.

Base Rear Cover Coaxial Cable Terminal Coaxial Cable Terminal Frame Ground Control Connector 1 Control Connector 2
Pan/Tilt Mechanisms and Scanners 239