B/W MINI CCVE SYSTEM
Closed Circuit Video Equipment

1/3'' B/W CCD Camera

WV-BP70

14'' B/W Video Monitor

WV-BM140
COMPLETE, COMPACT, EASY-TO-MANAGE CCVE SYSTEM IDEAL FOR SINGLE-MONITOR SURVEILLANCE OF UP TO 4 LOCATIONS.
The Panasonic Black and White Mini CCVE System lets you customize a reliable CCVE surveillance system for your specific requirements. It delivers optimum performance inexpensively. This Panasonic Mini CCVE system features multiplexing of video signal and power, and provides a timing pulse for synchronization. So each camera connects with the monitor via a single coaxial cable and no additional cable is needed for power. This eliminates complicated wiring, for easier installation and maintenance.
Key Features WV-BP70 1/3'' B/ W CCD Camera
1/3'' CCD pick-up elements with 512 H 582 V pixels provides a high 380 lines of horizontal resolution. High sensitivity of 2 lx with provided lens. 4.5 mm, F2.8 lens provided. Advanced electronic light control ELC enables the use of inexpensive optional fixed iris lenses. Wide ambient operating temperature range of -30 to +50. Both video and timing pulse are supplied through a single coaxial cable. Standard Configuration: Camera Head, Lens, Mounting Bracket.
WV-BM140 14'' B / W Video Monitor
14'' diagonal screen 13'' diagonal actual visual size. Four camera inputs and optional camera extension units can be connected up to 10 WV-BP70 cameras to WV-BM140 by using 2 WV-AD110A units. Built-in sequential switcher with adjustable dwell time from 1 second to 30 seconds. Unconnected input channels are skipped automatically. An external alarm trigger is also possible from the sequential monitoring mode, including an audible warning from the monitor. Camera identification on screen will confirm which camera is being monitored. User-friendly on-screen set-up menu
Camera identification display Audio selection sequence/fixed Timing selection int/ext Sequence time dwell time adjustment 1 sec to 30 sec Alarm buzzer setting Alarm time adjustment Brightness compensation
Standby mode : the entire system is inactivated until an alarm is activated. Video output terminal for additional video monitor to VTR. Video input terminal for playback picture.

OPTIONAL ACCESSORIES

Camera Indoor Housing Drip-Proof Housing Video Monitor
(Camera Head, Lens, Mounting Bracket)

Camera Extention Unit

WV-AD110A
Single Coax. Cable (Video/Power)

Panning Head

Remote Control Unit

1/3'' Fixed Iris Lenses

Alarm Time-Lapse VTRs

WV-35A

WV-LF4R5C3A WV-LF9C3A WV-LF4R5B3
AG-6124 AG-6040 AG-6730 AG-TL300 AG-TL700

SPECIFICATIONS CCIR

1/3'' B/W CCD Camera ; WV-BP70
Pick-up Device Scanning Area Synchronization Scanning System Scanning 512 (H) 582 (V) pixels, Interline Transfer CCD 4.8 (H) 3.6 (V) mm (Equivalent to scanning area of 1/3'' pick-up tube) Multiplexed Vertical Drive (VD2) 2:1 interlace 625 lines / 50 fields / 25 frames Horizontal : 15.625 kHz Vertical : 50 Hz 380 lines 1.0 Vp-p composite 75 ohms / BNC connector 46 dB Equivalent to continuous variable shutter speed between 1/50 sec, and 1/80,000 sec. 0.1 lux (0.01 footcandle) at F1.2 AGC ON, 0.15 lux (0.015 footcandle) at F1.4 AGC ON, 2 lux (0.2 footcandle) at F2.8 AGC ON (provided lens) F2.8, f=4.5mm 62.5 (H) 46.5 (V) -30 +50 (-20 F 122 F) less than 90 71(W) 65(H) 149(D)mm 0.45kg
14'' B/ W Video Monitor ; WV-BM140
Power Source Power Consumption CRT Size Actual Visual Size Camera Input Video Input Video Output Power Supply for Camera Camera Switching Sequential Switching Skip Auto Reset Resolution Sweep Linearity Scanning Frequency Audio Input Audio Output Speaker Output Intercom / Sensor Input Alarm Output Video Standby mode Standby mode Alarm Time Timing Extension Adaptor Input Camera Extension Length Ambient Operating Temperature Dimensions Weight 220V-240V AC,50Hz Approx. 63W 347cm (14'' diagonal) 322cm (13'' diagonal) 1.0V [p-p] 75 , composite 4 (BNC) 1.0V [p-p] 75 , composite 1 (BNC) 1.0V [p-p] 75 , composite 1 (BNC) Regulated current multiplex method Manual / Auto (sequence) with auto bypass Approx. 1,2,3,4,5,6,7,8,9,10,15,20,25,30 sec (selectable with Set Up menu) Automatic / Manual Automatic reset circuit can function at 60 sec. After receiving the sensor signal. (Auto reset on / off mode can be selected with set up menu) More than 1,000 lines at centre Horizontal : 5 or less Vertical : 5 or less Horizontal : 15,625 kHz Vertical : 50 Hz -8 dB / Hi-z (pin-jack) -10 dB /100 (pin-jack) 0.5 W 4 circuits (1 circuit per each camera) 1 circuit 1 circuit Approx. 1,5,10,20,30,40,50,60 sec (selectable with Set Up menu) Internal / External (selectable with Set Up menu) 12-pin Connector 200m (by 3C-2V coaxial cable with 30 ) -10 +(W) 325.5 (H) 328 (D) mm Approx. 10kg

Horizontal Resolution Video Output Signal-to-Noise Ratio Electronic Light Control Minimum Illumination
Lens Angular Field of View Ambient Operating Temperature Ambient Operating Humidity Dimensions (with lens) Weight (with lens)

APPEARANCE

Unit : mm

2-1/4'' -20UNC

WV-BM140 REAR VIEW
External Control Connection Terminals Timing Select Output Connector Timing Select Input Connector

18 149

Camera Extension Input Connector Audio Output Connector Audio Input Connector Camera Input Connectors Playback Input Connector Record Output Connector
Weights and dimensions are approximate.
Specifications are subject to change without notice.
These products may be subject to export control regulations.

DISTRIBUTED BY :

Panasonic is the brand name of matsushita Electric Printed in Japan ( N-604 )

PRODUCT FEATURES

WV-BM140 14" Black-and-White Single Cable System Monitor Product Features
1000 TV lines horizontal resolution On-screen set-up menu Sequence time adjustment 1-30 sec. Alarm time adjustment 1-60 sec. Audio input/output capability
Single Cable Camera Systems

TECHNICAL SPECIFICATIONS

WV-BM140 14" Monitor

GENERAL SPECIFICATIONS

Video Input Video Output Audio Input Audio Output Camera Input Actual Visual Size Resolution Power Source Dimensions Weight (1) 1.0Vp-p 75 ohm composite via BNC connector (1) 1.0Vp-p 75 ohm composite via BNC connector -8dB/Hi-Z (pin-jack) -10dB/100 ohms (pin-jack) (4) 1.0Vp-p 75 ohm composite via BNC connectors 8516"H x 1058"W 1000 horizontal TV lines 120VAC, 60Hz 121316"H x 1258"W x 1278"D 22 lbs.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
ARCHITECTS AND ENGINEERS BID SPECIFICATIONS
WV-BM140 The black-and-white video monitor shall be a Panasonic Model WV-BM140 or equivalent. It shall have a 14" diagonal screen with horizontal resolution of 1000 lines center, with an actual visual size of 8516"H x 1058"W. The monitor shall feature manual controls for on/off, brightness, contrast, vertical hold, horizontal hold, audio level, height, vertical linearity, on/stand-by mode, input selection and channel sequence. It shall feature an on-screen menu for adjustment of: camera titles; title display on/off; sequence time (1-30 seconds); alarm buzzer on/off; alarm time (1-60 seconds); auto reset on/off. The monitor shall feature 1 speaker. Terminals on the monitor shall be: 1 audio input and 1 output; 1 video input and 1 output, each 1.0Vp-p 75 ohm composite via BNC connector; 4 camera inputs, each 1.0Vp-p 75 ohm composite via BNC connector; and 1 camera extension input, via 12-pin connector. The monitor shall be UL listed. The dimensions shall be 121316"H x 1258"W x 1278"D and it shall weigh 22 lbs.