Matrix System 500

WV-CU550C WJ-SX550C WJ-AD550
Expandable to 128 Camera Inputs and 16 Monitor Outputs
Main Features and Functions

CAMERAS

Single coaxial cable concept reduces material and labor costs
The Matrix System 500 CCTV switching and control system is engineered with the latest advancements of microprocessor and LSI (Large Scale Integrated Circuitry) technology. It integrates Panasonic's extensive line of CCD cameras, time lapse VCRs, monitors and peripheral products into a comprehensive CCTV system. And, it also enhances each unit's performance with system control sophistication. All control, video, and timing signal (VD2) are multiplexed over a single coaxial cable allowing synchronization for most Panasonic CCD cameras. It allows you comprehensive and reliable viewing and recording to capture critical events. Matrix System 500 can fully control integrated camera devices such as the WV-CS854A/CS554 and all the on-board electronic functions of Panasonic's intelligent CCD cameras: WVCP460/CP240 and WV-BP550 Series. A built-in cable compensation circuit for every input channel provides high quality picture, control and synchronization up to 3,000 ft with RG-59/U cable (Belden 9259 or equivalent). The single coaxial cable concept results in significant savings through reduced material and labor costs. The extensive programming capabilities include versatile camera sequencing, alarm modes, time/date event scheduling, password protection, operator's access level, priority, and system partitioning. The Matrix System 500 consists of the main unit WJ-SX550C and the system controller WV-CU550C. It's modular construction enables expansion of up to 64 camera inputs and 16 monitor outputs. Utilizing the optional WJ-AD550 card cage, system expansion of up to 128 camera inputs is possible. The on-screen graphic menu programming, enables real time system status and, user-friendly operations. VCR control includes time/date synchronization, alarm control and camera sequence corresponding to time-lapse modes. The Matrix System 500 can also integrate external devices such as computers, printers and alarm input devices.
Roll free synchronized switching with up to 128 cameras using WJ-AD550 Control for both integrated and intelligent cameras Pan and Tilt, Lens, alarm and related accessories are processed through the coax cable or RS485 All camera inputs are equipped with cable compensation for up to 3,000 ft

SYSTEM

Extensive programming capability and expandable structure for flexible and simple operation
Versatile camera sequence modes, variety of alarm activations and timer event scheduling Programmable password protection, operator's access level, priority and system partitioning Modular construction allowing for up to 128 inputs and 16 outputs Easy to use system controller with LCD display and function keys

MONITORS

User friendly on-screen graphic menu set-up for system programming Real time system status monitor On-screen display for time & date, camera number, title, sequence mode, and alarm status
Synchronized time & date between Matrix display and VCR VCR control for alarm activation and reset Camera switching output to time lapse mode

EXTERNAL SYSTEM DEVICE

Data (RS-485) communication board for long distance communication RS-232C communication port system control and integration Printer output port Up to 128 alarm inputs

WJ-AD550

WJ-SX550C

WV-CU550C 2 3

Single Coaxial Cable
Control data, Video Signal and Timing Pulse (VD2) are multiplexed on to the video signal over a single coaxial cable, reducing material and labor costs. VD2 (synchronization for roll free switching) is accepted by most of the Panasonic CCD cameras. (See applicable cameras shown below.)
B/W Cameras Color Cameras Integrated Dome Cameras Single Wire Cameras WV-BP140 Series, WV-BP330 Series, WV-BP550 Series, WV-BL730 Series WV-CP460 Series, WV-CP240 Series, WV-CL830 Series, WV-CL920 Series WV-CS854A WV-CS554 Through Power Supply Unit WV-PS15 and WV-PS154, WV-CP160, WV-CP110
Control data (8 bit x 4 between camera site and matrix) can control integrated camera devices such as WV-CS854A/CS554, intelligent cameras such as WV-CP460/CP240 and WV-BP550, and pan/tilt/zoom lens functions through optional receivers WVRC100 and WV-RC150. Alarm signals received from the WV-CS854A or the WV-RC100/ 150 at the camera site can be transmitted to Matrix over a single coaxial cable to activate alarm events, preprogrammed in the system.
Timing Pulse (VD2) for Vertical Genlock Camera to Matrix Switcher Data 8-bit x 4 Matrix Switcher to Camera Alarm Video

Vertical Blanking

Since 1988, most of Panasonic cameras have been designed and manufactured to accept VD2 signal for system integration.
Color Surveillance Cameras
Super Dynamic II Color Dome Camera Super Dynamic II Color Dome Camera
In addition, built-in cable compensation circuitry enables camera control and synchronization on RG59U at distances of up to 3,000 feet.

WV-CS854A

WV-CS554
Versatile Camera Sequence Modes
Three types of sequence modes are provided to meet most application needs. Any sequences can be called up by the operator manually. Any tour and group sequence can be called up by alarm or trigger schedule automatically.

Program Sequence

A single sequence pattern for each monitor can be programmed. Up to 16 programs are available.
1/2-type CCD Color Surveillance Cameras with Low-Light B/W Mode
Super Dynamic II Color Surveillance Cameras

WV-CL920 Series

WV-CP460 Series

1st Floor Monitor 1

4th Floor Monitor 2

Monitor 16

1/3-type DSP Color CCD Cameras

WV-CP240 Series

Tour Sequence
32 sequence patterns can be programmed. A tour sequence can be viewed from any monitor. Each tour sequence can include independent dwell time, camera preset position, and auxiliary control in each step.
1/3-type DSP B/W CCD Cameras

B/W Surveillance Cameras

Super Dynamic DSP B/W Cameras

WV-BP550/BPR550 Series

WV-BP330 Series

T1 T7 T2 T8 T3 T4 T5 T6

Monitor 1

T9 T10 T11 T12

Monitor 2
T13 T14 T15 T16 T17 T18 T19 T20 T21 T22 T23 T24

1/3-type B/W CCD Cameras

Monitor 15

WV-BP140 Series

T25 T26 T27 T28 T29 T30 T31 T32

Group sequence

The group sequence mode allows system cameras to be switched onto different banks of monitors in synchronization.In other words, it enables a combined display of cameras located on specific zones/floors-to be synchronized together on a designated group of monitors.
Alarm Mode 3 : Any alarms to any monitors
Mode 3 is a fully programmable mode. Any alarm can be shown on any monitor, plus sequence routines, presets and auxiliary relays in receivers can be activated.
Any sequence, preset and auxiliary control

3rd Floor

C9 C10 C11 C12

CAM 10

CAM 11

CAM 12

2nd Floor

ANY Alarm

1st Floor

Any monitors

Monitor 1 Monitor 2 Monitor 3 Monitor 4

Timer Function

The timer function is used to register and activate a tour or group sequence within a specific period by setting start and stop time (maximum 45/day) on each day for the week, or five (5) special days. Also the alarms can be integrated in to the Time Schedule.

Timer Alarm Function

Alarm Interface
Roll Free Synchronized Switching
Panasonic's VD2 compatible cameras are completely synchronized to the Matrix System 500 and provide roll free switching for up to 128 cameras. It provides reliable viewing and recording to capture critical events.
The optional alarm board (WV-PB5564) can receive up to 64 alarm signals (Normally Open (NO) / Normally Closed (NC) selectable). Alarm signals can be multiplexed with the video signal from the optional receiver (WV-RC100/WV-RC150) over a single coaxial cable. VCR recording mode can be controlled under alarm conditions. Alarm condition can be reset either manually or automatically.
Operator Registration and System Partitioning
Up to thirty (30) operators can be registered in a system for different operator access levels for set up and operation. Password protection is available to limit operator access. Also, operator priority is available to lock out lower priority operators and to limit operator access to specific cameras and controls. Controller's partitioning can limit access to specified monitors.

Operator Registration

Multiple Alarm modes
Three alarm modes are available.
Alarm Mode 1 : Any alarms to 1 monitor
Mode 1 displays all alarms on Monitor One. If more than one alarm is activated, the system will sequentially display the alarms on Monitor One.

Alarm Alarm

Sequence

Priority

monitors

Level 1

MENU CAMERA TITLE TIMER PROG SEQ

OPE-2 OPE-3 OPE-4

8 ~ 26

Level 2

MENU CAMERA TITLE TIMER PROG SEQ TOUR SEQ GRP SEQ PRESET ALARM KEY BOARD CAM SELECT

Password

Alarm Mode 2 : Any alarms to 4 monitors
Mode 2 displays the first alarm on Monitor One, the second on Monitor Two, the Third on Monitor Three and the fourth on Monitor Four. If more than four alarms are activated, the system will sequence the pictures starting on Monitor One, then Two, etc.

Alarm Alarm Alarm

TOUR SEQ GRP SEQ PRESET ALARM KEY BOARD OPERATOR CONP/VD2 CLOCK CAM SELECT P-SEQ SELECT T-SEQ SELECT G-SEQ SELECT ALARM ACK/RST
OPE-5 OPE-6 OPE-7 OPE-8~ OPE-26 OPE-27

OPE-28 OPE-29 OPE-30

Level 3
CAM SELECT P-SEQ SELECT T-SEQ SELECT G-SEQ SELECT ALARM ACK/RST

Level 4

CAM SELECT P-SEQ SELECT T-SEQ SELECT G-SEQ SELECT

Level 5

CAM SELECT P-SEQ SELECT T-SEQ SELECT
P-SEQ SELECT T-SEQ SELECT G-SEQ SELECT ALARM ACK/RST

AE B F

OPERATOR'S LEVEL TABLE
User Friendly On-Screen Set Up
System set up can be easily programmed using graphic menus. System information can be displayed on each monitor and system status is available on a separate output.
WV-CU550C ; Easy-To-Operate Multiple Function Controller
The ergonomically designed controller WV-CU550C can be used for set up, camera control and video routing. Two line character LCD display and function keys provide simple and easy operation. Optional rack mount bracket WV-Q62 is available.

Examples of Menus

LCD Display Function key Alarm Acknowledgement Lens Iris LCD Display Selection

Joystick-Pan/Tilt

Example of Character Displays

Preset

Characters can be displayed on each monitor.
Display items: Date and time, camera title (15 characters x 2 lines), camera number, monitor number, sequence mode in effect, status, timer mode
AUX Control Sequence Control Numeric Keypad with Camera/Monitor Selection Lens Zoom/Focus
Data (RS-485) Communication for Long Distance Surveillance
The data communication board (WV-PB5548) enables RS-485 communication through optical fiber or other communication lines for long distance surveillance.
Super Dynamic II Color Dome Camera

VCR Control

VCR recording modes can be switched automatically from timelapse mode to real time mode and back, corresponding to alarm conditions in the system. Time synchronization between Matrix's display and VCR's is also possible using Panasonic time-lapse VCRs. Camera switching for time-lapse recording can be synchronized through an external timing pulse.

Flexible System Configuration
The Matrix System 500 has 8 inputs and 4 outputs as standard configuration. By adding 8 channel video input board (WV-PB5508), 4 channel output board (WV-PB5504A), and /or 64 channel alarm input board (WV-PB5564), the system can be expanded to meet your surveillance needs. Up to 8 WV-CU550C controllers can be connected to the system 500.

External Devices

The built-in RS-232C port allows integration to other systems. The Matrix System 500 can be controlled and programmed through the RS-232C port. If a printer is connected, the system set-up data can be printed and verified.
Standard Configuration of Main Unit WJ-SX550C
CPU Board Power Switch Panel Control Board 8 ch Video Input Board (WV-PB5508) 4 ch Video Output Board (WV-PB5504A) Rack Mount Angle (pair) Blank Panel 5
Standard Configuration of System Controller WV-CU550C
System Controller (WV-CU550C) Controller Cable 1 1
Standard Configuration of Optional Card Cage WJ-AD550
Power Switch Panel Rack Mount Angle (pair) Blank Panel Extend Board D-Sub 25 pin Cable 2
Options for the Matrix System 500
System Controller WV-CU550C 8 ch Video Input Board WV-PBch Video Output Board WV-PB5504A 64 ch Alarm Input Board WV-PB5564 Data Board WV-PB5548 Rack Mount Bracket WV-Q62 Blank Panel WV-Q63 Loop-through Cable WV-CA64
WV-PB5508 WV-PB5504A WV-PB5564 WV-PB5548 WV-Q62 WV-Q63 WV-CA64

System Configuration

Camera (1)

Camera (2)

Camera (64)

Camera (65)

Camera (128)

WV-RC150 Printer

Max. 64 Inputs Cameras

Total 128 Inputs

EXT END

Output Board x4

Input Board x8
D-Sub 25pin Cables (provided in WJ-AD550) EXT END Alarm x2

Computer RS-232C Port

Max 8. WV-CU550C System Controllers

Max. 16 Outputs Monitors

Max. 16 VCR Control Outputs
Matrix System 500 Specifications
Matrix Card Cage WJ-SX550C
Max. Number of Video Input Board: 8 (Total Input: 64) Max. Number of Video Output Board: 4 (Total Output: 16) Max. Number of Alarm Board: 1 (Total Alarm Input: 64) Max. Number of System Controller: 8 (WV-CU550C) RS-232C: 25 pin DB25 Printer: 25 pin DB25 Time Adjust In (from VCR): 2 pin Pair-Cable VD/VS In/Out: 2 (BNC) VD Out: Video Level 4 V [p-p]/75 (BNC) Camera Switching Dwell Time: Min.1 second, Max. 30 seconds Max.Number of Sequence: Program Sequence: 16 (1 Program/1 Monitor) Tour Sequence: 32 (Any Monitors) Group Sequence: 8 (Any Monitors) Timer Event Program Timer Event (Start/Stop): 45/Day Formats of Timer Event Program: Day of Week +5 Special Days Alarm Program Max.Number of Alarm Input: 64 Max.Number of Alarm Recall: 99 Alarm Activations: Mode 1: Any Alarms to Monitor 1 Mode 2: Any Alarms to Monitor 1-Monitor 4 Mode 3: Any Alarms to Any Monitors (Max.100 patterns) Timer Alarm: Alarm Start and Stop (Max. 10 patterns) Max.Operator Registration: 30 operators with 5 digits Password and Priority Operator Set-Up Access Operator Level: 5 Levels Ambient Operating Temperature 10C ~ +50C (14F ~ 122F) Power Source/Consumption 120 V AC, 60 Hz / Approx. 20 W (Max.75W at full board configuration) Dimensions 480 (W) x 265 (H) x 371 (D) mm [18-7/8" (W) x 10-7/16" (H) x 14-5/8" (D)] Weight 13.5 kg (29.7 lbs.) Option Blank Panel WV-Q63 General

Matrix System Controller WV-CU550C
Signal: RS-485 (Two Shielded Twisted Pair) Connector Type: 6 pin Modular Type Communication Speed: 1,200 - 9,600 bps Display LCD: 20 x 2 lines LED: Alarm, Busy, Acknowledge Switches and Controls Key: Numeric Keypad, Camera Key, Monitor Key Function Key: F1, F2, F3, F4, , , , Sequence Function: ALT, Stop, Back Seq, Forward Seq, Inc, Dec Lens Function: lris Open/Close, Focus Near/Far, Zoom Tele/Wide Joystick: Tilt Up/Down, Pan Right/Left, Preset, AF Controller Mode Selectable Switch Ambient Operating Temperature 10C ~ +50C (14F ~ 122F) Power Source/Consumption 120 V AC, 60 Hz / 4 W Dimensions 330 (W) x 74 (H) x 221 (D) mm [13" (W) x 2-15/16" (H) x 8-11/16" (D)] Option Rack Mount Bracket WV-Q62 *The Matrix System 500 has no capability of audio transmitting with System 100 / 200 / 300. Communication Port

Appearance WV-CU550C

330(13") 300(11-13/16")
82.5 (3-1/4 ") 72 (2-13/1 6") 2 (3/32")

177(6-15/16")

221(8-11/16")
Video Input Board WV-PB5508
Video Inputs Video Output Number of Input: 8 (BNC) Video Level: 1 V [p-p]/75 Number of Output: 8 (Active Loop-through) Connector Type: 9 pin DB9 x 2 Video Level: 1 V [p-p]/75 Camera Site Control: All Inputs Cable Compensation: S, M, L (Short, Middle, Long) Vertical Drive (VD2) Output: On/Off Loop-Through Cable WV-CA64

Function

265(10-7/16")

Option

Video Output Board WV-PB5504A
Video Output VCR Interface Number of Output: 4 (BNC) Video Level: 1 V[p-p]/75 Number of Alarm Out: 4 Ext. Tim. In: 4 Number of Reset Out: 4 Recover In: 4 Connector Type: 25pin DB25 x 1 Camera ID: 30 Characters (15 x 2 lines) Character Style: White with BLack Border/Black with White Border

Character Generator

8.4 (11/32")
348(13-11/16") 420(16-9/16") 465(18-5/16") 480(18-7/8")
272(10-11/16") 50(1-15/16") 350(13-3/4") 371(14-5/8")

Data Board WV-PB5548

Data Input / Output (1-8) RS-485 (Full Duplex or Half Duplex, selectable inside the switch) [5-pin T (A), T (B), R (A), R (B), GND] x 8 use with 2 shielded, twisted pairs data cable Transmitting Speed (Baud Rate): 1,200 - 19,200 bps Max. Number Boards 8 (Address 1 - 8, Total 1 - 64 Data Input)

32.6 (1-5/16")

Alarm Input Board WV-PB5564
Alarm Input Number of Alarm Input: 64 Connector Type: 37pin DB37 x 2 Type: Normal Open / Normal Close Selectable

Unit : mm (inches)

All TV pictures are simulated. Weights and dimensions are approximate. Specifications are subject to change without notice. These products may be subject to export control regulations.

DISTRIBUTED BY:

Panasonic Security & Digital Imaging Company

MAJOR OPERATING CONTROLS
OPTIONAL COMPONENTS & ACCESSORIES
Mounting Base for WV-CW474AF Heater Unit Clear Dome Cover

WV-Q112

WV-CW3H

WV-CW2C

Vandal Proof Super Dynamic II Color Cameras
(with Low-Light B/W Mode)

Digital Disk Recorders

WV-CW474A Series

WJ-HD309 (9ch)

System Controller

WJ-HD316 (16ch)

MATRIX SYSTEM 500

Matrix Switcher

WV-CU360C

WJ-SX550C

Card Cage

WJ-AD550

WV-CU550C

Color Monitors

WV-CM2080 WV-CM1780 WV-CM1480 WV-CM1420 WV-CM1020
51cm (20") 41cm (16") 36cm (14") 34cm (13") 22cm (9")

SPECIFICATIONS

Model No. Type Pick Up Device Scanning Area Scanning Scanning System Synchronization Video Output Resolution Horizontal Vertical Minimum Illumination (at F1.4 Wide) WV-CW474AS WV-CW474AF Surface mount type Flush mount type 768 (H) x 494 (V) pixels, interline transfer CCD 4.8 (H) x 3.6 (V) mm, (Equivalent to 1/3" tube) 525 lines / 60 fields / 30 frames 2 : 1 interlace Internal / Line-Lock / VD2 VBS 1.0V [p-p] / 75 / NTSC composite signal / BNC connector 510 lines (at High) and 480 lines at color imaging mode, 570 lines at B/W mode more than 350 lines 2.0 lux (0.2 fc) at color imaging mode 0.2 lux (0.02 fc) at B/W mode 0.8 lux (0.08 fc) at color imaging mode, with optional dome cover; WV-CW2C 0.1 lux (0.01 fc) at B/W mode, with optional dome cover; WV-CW2C 50dB (at AGC Off, Weight On, AP On) 46dB (typical) 16 character display (alphabet, numeric, symbols) ALC mode On / Off Off, 1/100, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000 sec. On (High / Mid / Low) / Off Off, Auto (x2, x4, x6, x10), Fix (x2, x4, x6, x10, x16, x32) ATW 1 / ATW 2 / AWC On / Off 2x variable focal lens 3.8 ~ 8.0 mm F1.4 (Wide) to F176, close / F1.8 (Tele) to F176, close 1.2 m (3.9 ft) - 24V AC 60Hz; 3.4W 12V DC; 335mA (12.1W optional Heater Unit; WV-CW3H only) 10C ~ +50C (14F ~ 122F) [30C ~ +50C (22F ~ 122F) with optional Heater Unit (WV-CW3H)] Less than 90% 160 x 140.5 (6-5/16" x 5-9/16") 152.5 x 137 (6 x 5-3/8") 1.7 kg (3.8 lbs.) 1.2 kg (2.7 lbs.)

APPEARANCE

WV-CW474AS (Surface mount type)

Unit: mm (inches)

270(10-5/8")
(NPSM 3/4) 160(6-5/16") SR47.5
42.5 39.5 (1-11/16") (1-9/16" ) 46(1-13/16") 83.5(3-5/16")
27( 1-1/16") 85(3-3/8") 51(2")
72(2-13/16") 152.5(6") 270(10-5/8")
Signal to Noise Ratio Dynamic Range Functions Camera Title Light Control Super Dynamic II Electronic Shutter AGC Electronic Sensitivity Up White Balance Motion Detector Lens Type Focal Length Aperture Ratio Min. Object Distance Power Source and Consumption Ambient Operating Temperature Ambient Operating Humidity Dimensions (D) x (H) mm Weight (approx.)
51.5(2-1/32") 19 (3/4") 99(3-7/8") 41.5 (1-5/8") 140.5(5-9/16")
WV-CW474AF (Flush mount type)
270(10-5/8") 270 (10-5/8")
51.5(2-1/32") 99(3-7/8") 38 (1-1/2") 137(5-3/8")

270 (10-5/8")

83.5(3-5/16")

SR47.5

64(2-1/2")
42.5 39.5 (1-11/16") ( 1-9/16") 46(1-13/16")

85(3-3/8")

The Easy to Install Vandal Proof Weather Proof Camera Solution
Important Safety Precaution: carefully read the operating instructions and installation manual before using this product. All TV pictures are simulated. Weights and dimensions are approximate. Specifications are subject to change without notice. These products may be subject to export control regulations.

Die-cast aluminum body

IP66 approved
Heater Unit: WV-CW3H (Optional)

DISTRIBUTED BY:

Shock Resistant
With a body made of die-cast aluminum and a dome made of 3.5mm thick polycarbonate, these cameras are tough enough to resist severe shocks. The camera lens unit has a spring structure, so the chassis can withstand external shocks.

Rain and Wind Resistant

Meet IP66 international standards. With excellent dust and moisture resistant capabilities these cameras can be used outdoors, under building eaves.
Ideal for Varying Temperatures
The optional heater unit adjusts automatically to temperature fluctuations, helping to prevent dew condensation.
Panasonic Digital Communications & Security Company
Unit of Matsushita Electric Corporation of America

Security Systems Group

http://www.panasonic.com/security
Executive Office : Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Zone Office Eastern : Three Panasonic Way, Secaucus, New Jersey 07094 (201) 348-7303 Central : 1707 N.Randal Road, Elgin, IL 60123 (847) 468-5205 Western : 6550 Katella Ave., Cypress, CA 90630 (714) 373-7840 PANASONIC CANADA INC. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010 PANASONIC SALES COMPANY DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC. San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00985 (809) 750-4300
Printed in Japan WV-JHCW474AC(2P-492B)
High Performance in a Rugged Body. With All the Features You Need for a Wide Variety of Surveillance Applications.
Panasonic's new Vandal Proof Super Dynamic II Color Cameras. The WV-CW474A Series are not only rugged and loaded with high-performance features, they are also easy to install. Highly resistant to dust, moisture and shock these units satisfy international standards. The WV-CW474A Series include high image quality, increased sensitivity, day/night switching for 24-hour surveillance and a multi-function motion detector. Free from conventional limitations on placement, application and objective, these multipurpose color cameras are ideal for numerous surveillance applications.
Feature Loaded & Simple to Install

F e a t u r e

Single-camera 24-hour surveillance Day/Night Switching
To allow 24-hour surveillance, these cameras (in highsensitivity mode) sense darkness and switch automatically from daytime color to nighttime black-and-white with duration and timer setting to meet exact installation requirements. They can also be switched from color to black-and-white manually.
Day (Color mode) Night (B/W mode) at low-light condition
L o a d e d Simple to Install
2x variable-focal lens is standard equipment
Equipped with a 2x variable-focal lens plus an additional 2x electronic zoom, these cameras can view their subjects in greater details.
Proprietary 3-D hinge makes adjustments easy
The 3-dimensional hinge (Pan, Tilt and Azimuth) allows the camera to be rotated as well as moved horizontally and vertically. Digital signal processing allows the image itself to be shifted up, down, left, right, or inverted. Choose precisely the camera angle you need; no camera Pan 320 degrees Tilt 150 degrees Azimuth 320 degrees makes it easier.

Basic settings couldnt be simpler
Simple dipswitches control Soft/Sharp, Day/Night: Off/Auto and other basic settings. A compact monitorout terminal with a small liquid crystal display allows you to check settings on the spot.
With Super Dynamic II, backlighting is no problem
With a 64 times dynamic range, Panasonic's proprietary Super Dynamic II processing yields clear images even in highcontrast or backlit lighting situations.
For single-camera 24-hour surveillance
Versatile attachment with Unlimited Positioning

Day/Night Switching

3-Dimensional Hinges

Day/Night switching

Set the lens aperture to the bright section, and the dark section is invisible.
Accepts both 24V AC and 12V DC power in a single unit
WV-CW474A Series accept both 24V AC and 12V DC with a single cable terminal. This unique capability enables simple model selection and easy installation.
Easily installs in existing electronic junction box
The Flush Mount Type WV-CW474AF can be installed in existing two gang junction box.
Full-color images at 0.8lux* (0.08fc*) Black-and-white images at 0.1lux* (0.01fc*)
These cameras support full-color surveillance in low-light situations like this parking lot, switching to black-and-white allows surveillance in light as low as 0.1lux (0.01fc) with optional clear dome cover; WV-CW2C. IR response down to 0.00lux is valid. 10x auto electronic sensitivity up is also supported (in fixed mode 32x available).

SYSTEM EXAMPLE

WV-CS854B x 8 WV-CW474A Series x 8
Senses motion and sends alarm signal
Set the lens aperture to the dark section, and the bright section is invisible.
Digital signal technology allows images with high contrast to be seen on screen.
Color Monitor Color Monitor PS-Data Link System Controller

64 times dynamic range

Current
WV-CW474A Series at color imaging

Motion Detector

Super Dynamic II
Digital Motion Detector senses movement and sends an alarm signal
When the Motion Detector senses movement in the monitored image, it automatically sends an alarm signal to the system. When linked to a recording device, it provides an efficient way to avoid missed images.

(Turns white only in demo mode)
Digital Disk Recorder WJ-HD316
LAN/WAN Ethernet (10Base-T/100Base-TX Cable)
WV-CW474A Series at B/W mode
PC Extension Unit WJ-HDE300 x 3 PC Internet

Character displays title

Two Types to Choose From
For direct attachment to walls, ceilings, eaves For insertion in existing junction box
*With optional clear dome cover; WV-CW2C
510-line horizontal resolution in color mode
Equipped with a powerful 768(H) x 494(V) 1/3-type CCD, these cameras deliver beautifully clear images with 510 lines (at High) and 480 lines horizontal resolution at color imaging, and 570 lines at B/W mode.
The monitor can display title up to 16 roman letters or numbers. By allowing instant identification of pre-set camera locations, this feature can help prevent errors during emergency situations.
Photographs were taken for the purpose of explanation; actual images may differ.

At Hospitals At Day Care

Centers
At Courthouses At Correctional

Facilities

Surface Mount Type

Flush Mount Type

WV-CW474AS

WV-CW474AF

At Warehouses
at ATMs/Banks/Jewelry Shops at Campus at Shopping mall/Building/Office

And many more