Super Dynamic III Day/Night Dome Network Camera

WV-NS202A

WV-NS202A (12 V DC or PoE) WV-NS202A (12 V DC or PoE)
Dome Network Camera featuring 22x zoom and Super Dynamic III

Key Features

MPEG-4 and JPEG digital signal output at VGA image size with up to 30 ips MPEG-4/JPEG dual stream output for simultaneous real time monitoring and high resolution recording Progressive output with motion adaptive interlace/progressive conversion allows every frame to be clear even when the object is moving. Super Dynamic III technology delivers 128x wider dynamic range compared to conventional cameras. High sensitivity with Simple Day/Night function: 0.7 lux (Color), 0.5 lux (B/W) at F1.6 Electronic sensitivity enhancement: Auto (Up to 32x) / OFF VMD (Video Motion Detector) with 4 programmable detection areas and 6 sensitivity levels Meta data for VMD is supplied to work with the WJ-ND400 playback VMD function. 22x zoom lens: 3.79 ~ 83.4 mm (approx. 220x with digital zoom) Auto tracking: Pan and tilt automatically controlled to keep moving objects centered in screen. PTZ control can be taken on the user friendly GUI with 16 speeds pan/tilt and new Drag and Zoom operation enabling finer control. 256 speeds available for system with WV-CU950 system controller. Up to 64 preset positions 360 map shot: 8 thumbnail images at 45 deg. intervals make it simple to direct the camera easily by clicking on a thumbnail. Built-in network interface (10Base-T / 100Base-TX) Power over Ethernet (PoE) IEEE 802.3af. Multiscreen: Image from 16 cameras can be displayed in 4 different Quad screens or 16-screen (JPEG only) FTP client function enables periodic image data transfer or transfer upon alarm Alarm notification via e-mail Max. bit rate/client (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps) or frame rate priority mode (4,096 kbps / Unlimited) for MPEG-4 and Total bit rate control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps / Unlimited) allowing flexible network management. Full duplex 2-way audio feature (G.726, 32/16 kbps) Alarm log, Manual REC log, FTP error log saved in the SD card is displayed on the browser GUI and can be downloaded to the client PC. Playback or Image data download through the log is also available. Internet mode: MPEG-4 images can be transmitted over HTTP protocol. Multi-language GUI and setup menu: English, French, Italian, Spanish, German, Polish, Russian (PAL) / English, French (NTSC) * Installation required except for English SD Memory card slot for Manual recording, Alarm recording and Backup upon network failure. Alarm sources include Terminal 1 ~ 3, VMD and Panasonic alarm command. Selectable alarm actions include SD memory recording, FTP image transfer, E-mail notification, Alarm indication, Terminal output, Camera positioning, Auto track and Panasonic protocol output. Scheduling function for Alarm / VMD / Access permission, Preset position call and Position refresh Industrial grade Pan/Tilt/Zoom mechanism for high reliability One-touch Fitting Mechanism for easy installation Desktop/Ceiling position choice and various optional brackets for versatile installations

Standard Accessories

CD-ROM*..1 pc. Installation Guide..1 pc.
* The IP setup software, the viewer software and the network operating instructions (PDF) are included on the CD-ROM.
Fixing Screw.. 2 pcs. (incl. a spare screw) Decorative Cover. 1 pc. DC 12 V Power Cord Plug. 1 pc. Code Label*.. 1 pc.
* It will be needed for network management. A network administrator should keep this label.
The followings are for installation. Mount Bracket (w/safety wire). 1 pc.

Optional Accessories

Inner Dome Cover Indoor Dome Cover Embedded Ceiling Mount Brackets

WV-Q153

WV-Q152C (Clear) WV-Q152S (Smoke)
WV-Q151C (Clear) WV-Q151S (Smoke)

(Smoke Type)

Wall Mount Brackets

Ceiling Mount Bracket

WV-Q150C (Clear) WV-Q150S (Smoke)

WV-Q105

Specifications
TV System Camera Image Sensor Scanning Mode Minimum Illumination White Balance Light Control AGC Super Dynamic III Dynamic Range Electronic Shutter Electronic Sensitivity UP Digital Noise Reduction Black and White Mode Video Motion Detector Privacy Zone Up Side Down Camera Title Type Angular Field of View Min. Object Distance Panning Range Panning Speed Tilting Range Tilting Speed Proportional Pan/Tilt Control Number of Preset Positions Auto Mode Image Hold PTZ Position Display Map Shot Camera Control Display Mode SD Memory Data Download Clock Display GUI / Setup Menu Language System Log Supported OS Supported Browser NTSC PAL 1/4 inch interline transfer CCD, Effective pixeles: 768 (H) x 494 (V), Scanning Area: 3.59 (H) x 2.70 (V) mm 2:1 interlace scan (with motion adaptive interlace/progressive conversion) Color (30 IRE): 0.7 lux (Sen up: OFF), 0.02 lux (Sens up: 32x) at F1.6 B/W (10 IRE): 0.5 lux (Sens up: OFF), 0.015 lux (Sens up: 32x) at F1.6 AWC (2,000 ~ 10,000 K), ATW1 (2,700 ~ 6,000 K), ATW2 (2,000 ~ 6,000 K) Automatic integration of ALC/ELC ON (LOW) / ON (MID) / ON (HIGH) / OFF ON or OFF (with BLC masking) 52 dB typical (Super Dynamic III: ON, Shutter speed: OFF) OFF (1/60), AUTO, 1/100 OFF / AUTO (2x, 4x, 6x, 10x, 16x, 32x) High / Low OFF / Auto (No IR moving) For preset position: 4 programable detection areas, Sensitivity: 6 steps Non-preset position: Detects entire screen except clock area, Sensitivity: 6 steps Up to 8 zones, Gray/Mosaic ON (desktop) / OFF (ceiling) Up to 16 characters (alphanumeric characters, marks) 22x (3.79 mm ~ 83.4 mm) zoom lens, 220x with 10x digital zoom. F: 1:1.6 (Wide) ~ 3.0 (Tele) H: 2.6 (Tele) ~ 51.7 (Wide), V: 2.0 (Tele) ~ 39.9 (Wide) 1.6 m 0 ~ 350 Manual: approx.1/s ~ 100/s, Up to 256 steps (depending on the controller) Preset: up to approx. 300/s 30 ~ 90 (upward-level-downward) Tilting angle limit: 0 / 5 / 10 / 15 / 20 / 25 / 30 Manual: approx. 1/s ~ 100/s, Up to 256 steps (depending on the controller) Preset: up to approx. 100/s Yes 64 OFF/ preset sequence / auto pan / auto track ON / OFF ON / OFF 360 map shot / preset map shot Pan/Tilt (16 steps), Zoom, Focus, Click centering, Drag zoom, Iris, Preset position call and program, Auto mode Image from 16 cameras can be displayed in 4 different Quad screens or 16-screen (JPEG only). 20 characters camera title available. Images recorded in the SD memory card can be downloaded. Time: 12H/24H, Date: 5 formats on the browser, Summer time (Manual) English, French, Italian, Spanish, German, Polish, English, French (Installation required for French) Russian (Installation required except for English) Alarm log, Manual REC log, FTP error log (SD memory required) Microsoft Windows Vista Business 32 bit, Microsoft Windows XP Home/Professional SP2, Microsoft Windows 2000 Professional SP4 English, French, Italian, Spanish, German Windows Internet Explorer 7.0 (Microsoft Windows Vista Business 32 bit), Microsoft Internet Explorer 6.0 SP2 (Microsoft Windows XP Home/Professional SP2), Microsoft Internet Explorer 6.0 SP1 (Microsoft Windows 2000 Professional SP4) 10Base-T / 100Base-TX, RJ45 connector VGA (640 x 480) / QVGA (320 x 240) MPEG-4: Image quality: LOW/NORMAL/FINE, Transmission type: UNICAST/MULTICAST JPEG: Image quality: 10 steps, Transmission type: PULL/PUSH 0.1 / 0.2 / 0.33 / 0.5 / 1 / 2 / 3 / 5 / 6 / 10 / 15 / 30 ips (Max. rate will be 5 ips-VGA, 10 ips-QVGA when transmitting JPEG and MPEG-4 simultaneously) G.726 (ADPCM) 32 kbps/16 kbps OFF / Mic input / Audio output / Interactive (Half duplex) / Interactive (Full duplex) 64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps / Unlimited 64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps or Frame rate priority (4,096 kbps / Unlimited) TCP/IP, UDP/IP, HTTP, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP Alarm image transfer, Periodic image transfer Up to 8 users Manual REC/Alarm REC/Backup upon network failure. Compatible SD card: Panasonic 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB model. SDHC standard card not supported. Up to 16 users 3 Levels: Administrator, Camera control, Live only User authentication (ID and Password), Host authentication (IP address) 3x Terminal inputs, VMD, Command alarm SD memory recording, E-mail notification, Indication on browser, Camera positioning, FTP image transfer, Terminal output, Panasonic protocol output, Auto track With SD memory card: 5,000 logs, Without SD memory card: 1,000 logs Alarm/VMD/Access permission, Preset position call, Position refresh 1.0 V [p-p] / 75 , 1.0 V [p-p] / 75 , NTSC composite, 3.5 mm mini jack PAL composite, 3.5 mm mini jack ALARM IN 1, ALARM IN 2/ALARM OUT, ALARM IN3/AUX OUT MIC IN (Applicable microphone; Plug-in power type) Supply voltage: 2.5 V 0.5 V Input impedance: 3 K 10 % AUDIO OUT 3.5 mm stereo mini jack (monaural output) Line level UL (6500), FCC (Part15 ClassA), CE (EN55022 ClassB, EN55024), C-UL (CAN/CSA E60065), DOC (ICES003 ClassA) GOST (GOST R 51558) DC 12 V: approx. 1,000 mA, PoE: approx.12.0 W (IEEE802.3af compliant, Class 0 device) 10 C ~ +50 C (14 F ~ 122 F), 90 % or less (without condensation)

Part Names and Functions

Front View

Rear View

Pan and Tilt

Browser GUI

Camera Panasonic Logo Plate SD Memory Card Slot Cover SD Memory Card Error Indicator SD Memory Card Slot Link LED Network Connector DC 12 V Power Terminals Power LED Access LED
[INITIAL SET] Button Cable Guide Audio Output Connector Monitor Out Connector Safety Wire Holder Microphone In Connector External I/O Terminals Mounting Bracket Safety Wire Decorative Cover

Appearance

4-7(4-9/32") 8-5(8-3/16") 60(2-3/8") 64(2-17/32") 46 (1-13/16") 1/4-20UNC For Camera Mount (Depth: 6mm(1/4"))

Network

Network IF Image Resolution Image Compression Image Refresh Rate (JPEG) Audio Compression Audio Mode Total Bit Rate Max. Bit Rate/Client (MPEG-4) Supported Protocol FTP Client No. of Simultaneous Users SD Memory Card (Option) User Registration User Level Security Method Alarm Source Alarm Actions Alarm Log Schedule Monitor Output External I/O Terminals Microphone Input Audio Output Safety/EMC Standard
38 154(6-1/16") (1-1/2") 156(6-5/32") 2(3/32") 153.5(6-1/32") 2(3/32") 151.5(5-31/32")
83.5(3-9/32") 110(4-5/16") 132(5-3/16") 185(7-9/32")

115(4-17/32")

Unit: mm (inches)

Input/ Output

General
Power Source/Consumption Ambient Operating Temperature/Humidity 115 mm x 154 mm (H) (4-17/32" x 6-1/16" (H)) (excluding the DC 12 V power cord plug) Dimensions Weight Camera: approx. 850 g (1.87 lbs.) Accessories (Camera mounting bracket, decorative cover): approx. 200 g (0.44 lbs.)
Trademarks and registered trademarks Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. "Super Dynamic", "SDII", "SDIII" and "i-Pro" logos are trademarks or registered trademarks of Panasonic Corporation. Important Safety Precaution: carefully read the operating instructions and installation manual before using this product. Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network. All TV pictures are simulated. Weights and dimensions are approximate. Specifications are subject to change without notice. These products may be subject to export control regulations. All product pictures are NTSC models.

DISTRIBUTED BY:

http://panasonic.net/security/

Printed in Japan (2A-003AA)

121.5(4-25/32")

Major Operating Controls and Their Functions

Top cover

Wall Mount Bracket

Operating Instructions

Bottom cover Fixing screw to be used for cover fall prevention Microphone stand* Dome cover Notch for network cable, monitor output cable, etc. Notch for network cable Hole for microphone cable

Model Nos.

WV-Q150C WV-Q150S
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number suffix is shown in this manual.
* If a microphone is used, mount the microphone on the rubber-made microphone stand. Unless the microphone is used, cut the rubber with a nipper or conduct another treatment.
NM0806-3106 3TR004556DAA Printed in Japan

Preface

This bracket is exclusively designed to mount the network camera, WV-NS202, on a wall. The network camera shall be mounted on this bracket after mounting this bracket on a concrete wall. WV-Q150C: Clear dome cover WV-Q150S: Smoked dome cover (approx. 50 % of transmittance)

Installation Area

Instructions for installing the machine and a wiring example are given below. * The pull-out strength of the installation area shall be 392 N {40 kgf} or more per 1 screw.

G Embedded box

Wall box

G Strong wall

G Concrete

Precautions

Refer installation work to the dealer. Installation work requires technique and experiences. Be sure to refer installation work to the dealer to avoid fire, electric shock, injury, or damage to the product. Use only the specified camera. Failure to observe this may cause a fall of an inappropriate camera resulting in injury or accidents. Mount WV-NS202 on this bracket exclusively. The measures of protection against a fall of the camera shall be taken. Failure to observe this may cause injury. Be sure to install this bracket-specific safety wire. Avoid installing this bracket in the locations where salt damage occurs or corrosive gas is produced. Otherwise, the mounting portions will deteriorate and accidents such as a fall of the camera may occur. The screws and fixation mechanisms shall be tightened securely. Failure to observe this may cause a fall of the camera resulting in injury or accidents. Periodic inspections shall be conducted. Rust on the metal parts or screws may cause a fall of the camera resulting in injury or accidents. Be sure to consult the dealer for the inspections. Do not rub the edges of metal parts with your hand. Failure to observe this may cause injury. Make sure that the installation area is strong enough to hold the total weight of the camera assembly (approx. 1.8 kg {0.4 lbs.}) before installation. The screws that secure this bracket on a wall are not supplied. Prepare the screws according to the material, structure, strength and other factors of the mounting area and the total weight of objects to be mounted. (4 pieces of M4 screws or 2 pieces of M4 screws and 2 pieces of M6 or M8 anchor bolts) In this case, wood screws and nails should not be used. Avoid installing in the following locations. Locations where it may get wet from rain or water splash (not only outdoor) Locations where a chemical agent is used such as a swimming pool Locations subject to steam and oil smoke such as a kitchen Locations near flammable gas or vapor Locations where radiation or x-ray emissions are produced Locations subject to strong magnetic field or radio waves Locations where it may be damaged by briny air such as seashores Locations where the temperature is not within 10 C - +50 C {14 F - 122 F}. Locations subject to vibrations (This product is not designed for on-vehicle use.) Locations where the temperature may rapidly change such as the peripheral areas of the air outlets of air conditioners or doors facing outside. (In case of installing the camera in such locations, the dome cover may become foggy or condensation may be caused on the cover.) The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area. After tightening the screws or bolts, perform visual check to ensure tightening is enough and there is no backlash. The pull-out strength of the installation area shall be 392 N {40 kgf} or more per 1 screw. The protection sheet attached to the dome cover shall be peeled off after installation.

Anchor bolt Anchor bolt

Installations
Be sure to read "Precautions" before installation. The Installation Guide of the network camera, WVNS202, shall be read as well. 1. Put the template (accessory) against the wall and mark the positions of fixing screws and hole through which the cables run. If you run the cables through the wall, drill a hole through the wall.

Template (accessory)

2. Remove the bottom cover from this bracket. q Loosen the fixing screw (unremovable) to be used for cover fall prevention. w Pull down the bottom cover while pressing the marks (shown with a in the drawing) to remove the cover. * Be aware that the inner shell is present in the cover.
Fixing screw to be used for cover fall prevention
(To be continued reverse page)
Installations (continued)
3. Install the inner shell. Slide the covers located on the both lateral sides of the camera and put the inner shell on the camera until the hooks inside the inner shell are held in the holes of the camera (until a click is heard). Important: Put the inner shell down on the camera until the outside cover of the camera cannot be seen from the opening (from which the camera lens is visible) of the inner shell. If this integration is not successfully performed, the inner shell may be removed or the hidden part at the top of the screen may become larger in the WIDE mode.

Inner shells

Note: When the camera lens is pointed in the horizontal direction, the inner shell interferes with the cameras view, and consequently about upper half of the monitor screen is hidden in the WIDE mode.
Cover Put on until a click is heard

Specifications

Ambient temperature: Dimensions: Weight: Finish: 10 C - +50 C {14 F - 122 F} 165 (W) x 206.5 (H) x 217.5 (D) mm {6-1/2" (W) x 8-1/3" (H) x 8-9/16" (D)} Approx. 950 g {2.10 lbs.} Main body: Treatment steel Top and bottom covers: ABS resin with silver metallic coating Dome cover: Acrylic resin
How to remove the inner shell Press the inner shell from the front and rear sides inward (at the same vertical position as the hooks) to bend the shell and remove the shell from the camera.
Press from the front and rear sides inward to bend

Standard Accessories

Operating Instructions (this book).. 1 pc. The following are for installation. Template... 1 sheet Inner shell... 1 pc.

4. Mount the top cover on the wall and run the cables. Secure the top cover in either of the following two ways: q and w. No screw is supplied. Procure screws according to the installation area. q M4 screws, 4 positions (a) or w M4 screws, 2 positions ((a) upper 2 positions, not available in lower positions) and M6 or M8 anchor bolts, 2 positions (b)
Important: The length of the anchor bolt projecting portion (the distance between the tip of the anchor bolt and the chassis attaching surface) shall be 7 mm {1/4"} or less. Failure to observe this causes interference between the anchor bolt and bottom cover. Therefore, the bottom cover cannot be mounted.

7 mm {1/4"}

Anchor bolt
5. Mount the camera. Refer to "Installations/Connections" in the Installation Guide of WV-NS202 for further information. The camera mounting bracket is already attached to this bracket at the time of purchase. Important: Make sure to install the camera by pushing it firmly into the camera mounting bracket.
Safety wire Camera fixing screw
6. Mount the bottom cover. Be sure to push the bottom cover up until a click is heard. Important: Do not let the cables be caught during installation work.
For U.S., Canadian and Puerto Rican fields:
Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America
Security Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N. Randal Road, Elgin, IL 60123 Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 Western: 6550 Katella Ave., Cypress, CA 90630
For European and other fields:
Matsushita Electric Industrial Co., Ltd.
Osaka, Japan http://panasonic.net

Panasonic Canada Inc.

Bottom cover
5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca
Panasonic Sales Company Division of Panasonic Puerto Rico Inc.
7. Tighten the fixing screw to be used for cover fall prevention. Recommended tightening torque: 1.6 Nm {16 kgfcm}

San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina P.R. 00985(809)750-4300
2006 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.