K636 - Users Quick Reference Guide

KEYPAD OVERVIEW

Zone Display: Key lit [1] to [0(10)] correspond to zones 1 to 10 respectively. Key Lit = Open or Entry delay StayD Light (green) On = StayD on Off = StayD off Off Light (red) On = Disarmed Off = System armed AC Light (orange) On = Power on Off = Power off [ARM], [SLEEP], [STAY]: On = System Armed Off = Zone disarmed Flash = Exit Delay Fast = Exit Delay (final 10 sec.) Flash* or zone in alarm * Audible Indicators: Continuous beep = Alarm Variable beep = Fire alarm Intermittent beep = Beginning of exit delay Fast beep = Final 10 sec. of exit delay
Key Flash = In alarm or Tamper = Press once + [MASTER CODE] for Quick Menu Programming. Keys [TBL] Trouble display On = Trouble(s) occurring [MEM] Alarm memory display On = Alarm(s) occurred [BYP] Bypass programming On = Zone(s) bypassed

ARMING AND DISARMING

TO ARM WHEN LEAVING.
To Regular Arm: 1. Close all opened zones. 2. Press [ARM]. 3. Enter your [ACCESS CODE].

TO ARM WHEN STAYING.

To Stay Arm: 1. Press the [STAY] key. 2. Enter your [ACCESS CODE]. To Sleep Arm: 1. Press the [SLEEP] key. 2. Enter your [ACCESS CODE].
To Disarm: [OFF] + [ACCESS CODE]

PANIC ALARMS

To send an audible alarm to your Security Company, press and hold one of the button combinations listed for 3 seconds.
Panic Alarm Type Button Combinations Press [1] & [3] Press [4] & [6] Press [7] & [9]

ALARM MEMORY DISPLAY

To view the alarms that occurred during the last armed period: 1. Disarm the system. 2. Press the [MEM] key. 3. The corresponding zone numbers that were in alarm the last time the system was armed will illuminate. 4. Press the [CLEAR] key to exit.

Police Medical Fire

TROUBLE DISPLAY
When a trouble condition occurs, the [TBL] key will illuminate. 1. Press the [TBL] key. The key will flash and number(s) corresponding to the trouble(s) will illuminate. 2. Read the corresponding explanation from the trouble list in the Esprit E55 User Guide. 3. Press the [CLEAR] key to exit.

KEYPAD SETTINGS

To mute the keypad: Press and hold the [CLEAR] key for 6 seconds to enable or disable Keypad Muting. To modify the backlight: 1. Press and hold the [MEM] key for 3 seconds. 2. The [MEM] key will illuminate. 3. Press the [MEM] key to set the desired backlight level. 4. Press [CLEAR] twice to exit.

BYPASS PROGRAMMING

Bypassed zones remained unarmed when the system is armed. 1. Press the [BYP] key. 2. Enter your [ACCESS CODE]. 3. The corresponding key of all open zones will illuminate. Select the zone(s) you want to bypass by entering the one-digit zone number. The zone key will flash. 4. Press the [ENTER] key to save and exit.

CHIME PROGRAMMING

A Chime Enabled zone will advise you every time it is opened by causing your keypad to beep. 1. Press & hold the corresponding zone key for 3 seconds (Accept beep = Chime enabled, Fail beep = Chime disabled).
Paradox Security Systems Ltd., 2008. Esprit E55 is a trademark or registered trademark of Paradox Security Systems Ltd. and its affiliates in Canada, the United States and/or other countries. All rights reserved.
Printed in Canada 02/2008

PARADOX.COM

K636-EQ00

K10V | 10 Zone Hardwired LED Keypad (Vertical) K10H | 10 Zone Hardwired LED Keypad (Horizontal) 10 zone LED display StayD status LED Separate Arm, Sleep, Stay and Off LEDs per partition Patented Key Light display (button lights up to indicate an open zone) Adjustable backlight 2 partition keypad See Features Common to All Hardwired Keypads on page 18 K10V
K10H K636 | 10 Zone Hardwired LED Keypad Single partition keypad 10 zone LED display StayD status LED Patented Key Light display (button lights up to indicate an open zone) Arm, Sleep, Stay and Off keys illuminate to indicate partition status Adjustable backlight See Features Common to All Hardwired Keypads on page 18
Zone and Wireless Expansion Modules
ZX8SP | 8 Zone Expansion Module ZX8SP is compatible with the Spectra SP series, E55, MG5000 and MG5050 Add 8 zones 1 PGM output Use zone input as an anti-tamper switch input ZX8 | 8 Zone Expansion Module Same features as the ZX8SP plus: ZX8 is compatible with E55, MG5000, MG5050, Spectra SP series and Digiplex EVO
RTX3 | Wireless Expansion Module 32 wireless zones and 32 remote controls When used with Spectra SP series control panels, functions with all Magellan wireless devices (see page 38 to 41) including 2WPGM, REM3, REM2, RPT1 and wireless keypads In-field firmware upgradeable via a 307USB and WinLoad Compatible with Spectra SP Series, Digiplex EVO and PX8 Low battery, tamper and check-in supervision Transmitter signal strength display 3 PGM outputs and 1 optional output Noise level test and indicator Available in 433MHz or 868MHz Also functions in stand-alone mode (see page 42)

Paradox Security Systems