ILLUSTRATED PARTS LIST MFG ID NO. 96011022800 CUSTOMER CATALOG NO. P12107 PRODUCT NO. 02-28

403287 04.27.06 TR

REPAIR PARTS
TRACTOR - - MODEL NUMBER P12107 (96011022800), PRODUCT NO. 02-28

DECALS

KEY NO. 9

PART NO.

DESCRIPTION
63-57 Decal, Deect Warning Cutnger Sym. 50-05 Decal, Bat Dan/Poi P/L Symbols 16-00 Decal, Hood 68-41 Decal, Warning Engine 47-65 Decal, Engine 56-51 Decal, Chas. Turbo Collection 08-37 Decal, Saddle Brake Parking 22-22 Decal, Fender 03-89 Decal, Warning Sym CE

KEY NO. -----

PART NO. 97-18 21-18 04-40 16-15 97-16 03-16 25-13 83-40 09-40 09-02
DESCRIPTION Decal, Chassis Hot Mufer Decal, Mower Cut nger Symbol Decal, 100 Db/CE Decal, Strg Wheel Cap Decal, Brake/Clutch Decal, V-Belt Sch Decal, Drawbar Load Limit Decal, Lift Handle (Lift Handle) Manual Operator's Euro Manual Operator's Scan

WHEELS & TIRES

5,8 4,10

7 3,11

KEY NO. 11
PART NO. 91-06 51-12 41-05 99-18 33-12 49-12 49-18 33-12 39-12 49-17 50-39
DESCRIPTION Cap Valve Tire Stem Valve Tire F Ts 15 x - 6 Service Tube Front (Service Item Only) Rim Asm 6" front Service Fitting Grease (Front Wheel Only) Bearing Flange (Front Wheel Only) Rim Asm 8" rear Service Tire R Ts 18 x 8.5-8 C. Service Tube Rear (Service Item Only) Cap Axle Blk x 1 00
NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm

SCHEMATIC

03059_197428

BATTERY

SOLENOID

STARTER M

AMMETER (OPTIONAL)

B S M G A1 L A2

BLUE WHITE
CLUTCH / BRAKE (PEDAL UP)
ATTACHMENT CLUTCH (CLUTCH OFF)
SEAT SWITCH (NOT OCCUPIED)

BLACK BLACK

GRAY GRAY

REVERSE SWITCH

SHORTING CONNECTOR

NOT IN REVERSE

BLACK/WHITE

IGNITION UNIT

SPARK PLUGS GAP (2 PLUGS ON TWIN CYL. ENGINES)

FUEL SHUT-OFF SOLENOID

HOUR METER

(OPTIONAL)

FUEL LINE
CHARGING SYSTEM OUTPUT 3 AMP DC @ 3600 RPM
28 VOLTS AC MIN. @ 3600 RPM (CHARGING SYSTEM DISCONNECTED)

(IF SO EQUIPPED)

LIGHTING SYSTEM OUTPUT 5 AMP AC @ 3600 RPM DIODE

ALTERNATOR

LIGHT SWITCH HEADLIGHTS

IGNITION SWITCH

POSITION OFF

RUN/OVERRIDE

CIRCUIT M+G+A1 B+A1 B+A1 B + S + A1

RUN START

NOTE YOUR TRACTOR IS EQUIPPED WITH A SPECIAL ALTERNATOR SYSTEM. REMOVABLE THE LIGHTS ARE NOT NON-REMOVABLE CONNECTIONS CONNECTED TO THE CONNECTIONS BATTERY, BUT HAVE THEIR OWN ELECTRICAL SOURCE. BECAUSE OF THIS, THE WIRING INSULATED CLIPS BRIGHTNESS OF THE LIGHTS NOTE: IF WIRING INSULATED CLIPS WILL CHANGE WITH ENGINE WERE REMOVED FOR SERVICING OF SPEED. AT IDLE THE LIGHTS UNIT, THEY SHOULD BE REPLACED WILL DIM. AS THE ENGINE IS TO PROPERLY SECURE YOUR WIRING. SPEEDED UP, THE LIGHTS 03059 WILL BECOME THEIR BRIGHTEST.

ELECTRICAL

197428

KEY NO. 94

PART NO. 34-76 04-17 66-17 61-18 37-00 41-12 47-14 61-17 51-51 04-12 47-19 27-19 33-14 04-11 07-19 74-11 04-13 15-19 25-14 08-14 19-18 04-19 66-19 25-19 18-34
DESCRIPTION Battery 12 Volt 25 Amp Bolt Hex Hd 1/4-20 unc x 3/4 Case Battery Mech Hiinge Switch Interlock Push-In Harness Asm Light W/4152j Bulb Light #1156 Cable Battery 6 Ga. 11"red Cable Battery Fuse Nut Keps Hex 1/4-20 unc Cable Ground 6 Ga 12"black Switch Seat Switch Ign Key Ign Switch Light/Reset B/B/Red Harness Ign Bolt Blk Fin Hex 1/4-20 Cover Terminal Red Solenoid Adapter Ammeter Protection Wire Loop Cover Terminal Battery Harness Pigtail consle ROS Screw Plastite 10-14 x 2.0 Module Reverse ROS
NOTE: All component dimensions given in U. S. inches 1 inch = 25.4 mm.

CHASSIS

29 212

208 11

207 26

145 37

chassis_elite value_stlt_2

KEY NO. --

PART NO. 46-17 65-15 52-19 48-14 06-17 49-18 69-49 06-18 58-18 49-78 06-13 13-80 06-18 35-18 58-19 48-13 66-18 30-18 30-11 06-49 05-17 57-17 47-15 47-17 57-15 65-17 01-67 05-67 06-00 06-18 35-19 16-00 54-79
DESCRIPTION Chassis Drawbar Bumper Hood Dash Dash Bolt Rdhd Sqnk 3/8-16 unc x 1 Panel Dash LH Panel Dash RH Screw Thdrol 3/8-16 x 1/2 Hood Bumper Hood Bolt Fin Hex 3/8-16unc x 1 Gr. 5 Washer 13/32 x 13/16 x 12 Ga. Nut Lock Hex w/Ins 3/8-16 unc Grille/Lens Asm (Includes Key #'s 29, 212) Lens Grille Fender Bracket Fender Repl 109873X Footrest Pnt LH Footrest Pnt RH Bolt Rdhd Sht Sqnk 3/8-16 X3/4 Screw Thdrol 5/16-18 x 1/2 Tyt Bracket Asm Pivot Mower Rear Bracket Pivot Laser Dash Lower STLT Plate Reinforcement STLT Rod Pivot Chassis/Hood Bolt Shoulder 5/16-18 Screw Thdrol 5/16-18 x 1/2 Screw Thdrol 3/8-16 x 1/2 Screw Hex Wsh Thdr 3/8-16 x 3/4 Insert Lens Reective Screw 10 x 3/4 Single Lead Hex Plug Button

NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm.

263 275

112 14

165 156

166 38

151 51

34 120

drive-fender.stlt_37

KEY NO. 62
PART NO. --------66-12 36-00 00-12 15-00 05-19 27-02 04-10 57-55 04-04 04-49 05-80 05-78 06-80 06-10 69-13 08-35 06-10 68-13 13-02 04-17 57-07 16-17 49-76 05-17 55-12 01-21 16-12 49-17 91-11 06-17 55-12 77-15 44-12 32-11 06-68 06-68 05-19 96-10 57-06 06-16 08-16 96-12 06-12 48-72
DESCRIPTION Transaxle, Dana D4360-140 (Order parts from transaxle manufacturer) Spring Return Brake T/a Zinc Pulley Transaxle 18" tires Ring Retainer # 5100-62 Strap Torque 30 Degrees Screw 5/16-18 x 3/4 Rod Shifter Pin Cotter 1/8 x 1 Cad Washer Plate Shf 388 Sq Hole Bolt 1/4-28 Unf Gr 8 W/Patch Washer Lock Hvy Helical 1/4 Bolt Hex Flghd 5/16-18 Gr. 5 Nut Lock Hx W/Ins 5/16-18 unc Bolt, Fin Hex 3/8-16 unc x 1 Gr. 5 Nut Lock 3/8-16 unc Knob Rod Brake Blk Zinc Nut Hex Jam 3/8-16 unc Spring Rod Brake Zinc Washer 13/32 x 13/16 x 16 Ga Pin Cotter 1/8 x 3/4 Cad Rod Brake Parking Cap Brake Parking Bracket Mtg Transaxle Bolt Hex Hd 5/16-18 unc x 3/4 Shaft Asm Pedal Foot Bearing Nylon Blk 629 Id Washer 21/32 x 1 x 16 Ga Pin Roll 3/16 x 1" Pulley Idler Composite Bolt Rdhd 3/8-16 unc x 2-3/4 Gr. 5 Keeper Belt Retainer Idler Pulley Idler V Groove Plastic Bellcrank Asm Retainer Belt Style Spring Bolt Carr Sh 3/8-16 x 1-1/2 Gr. 5 Nut Crownlock 3/8-16 unc Nut Crownlock 5/16-18 unc Link Clutch Spring Return Clutch Screw 3/8-16 x 1-1/4 V-Belt Ground Drive Keeper Belt Span Ctr Screw 3/8-16 x.875 Cover Pedal Blk Round

KEY NO. 268 275

PART NO. 02-17 39-04 07-15 47-14 24-18 02-10 95-12 17-00 00-12 35-12 17-12 50-13 14-16 55-16 57-17 12-16 62-15 03-19 49-12 47-09 12-12 72-14 06-90 06-17 54-13 32-16 60-16 55-18 39-14 04-68 04-78 04-16 56-49 05-16 54-16 55-18 74-16 96-16 95-11 06-14 52-00 06-18 24-13 16-14
DESCRIPTION Engine Pulley Bolt Hex Washer Lock Hvy Hlcl Spr 7/16 Keeper Belt Engine Foolproof Screw Hex Wsh Hi-Lo 1/4 x 1/2 unc Guide Belt Mower Drive RH Spacer Axle Washer 25/32 x 1 1/4 x 16 Ga. E-ring #5133-75 Key Square x 1845/ 1865 Washer 25/32 x 1-5/8 x 16 Ga. Key Woodruff Arm Shift Transaxle Shaft Asm. Cross Taper Spring Torsion Shift Washer 17/32 x 3/4 x 16 Ga. LinkTransaxle Nut Lock Center 1/4-28 Console SVC Shift Retainer Spring 1" Washer 9/32 x 3/4 x 10 Ga. Strap Torque Lh Bolt Rdhd Sq Neck 3/8-16 x 1.00 Nut Lock Flg 3/8-16 Spacer Retainer Washer 13/32 x 2 x 10 Washer Srrtd 5/16ID x 1.0 x.125TK Bracket Shift Mount Hub Shift Bolt RDHD SQNK 1/4-20 x 3/4 Gr.5 Nut Crownlock 1/4-20 unc Bolt Hex Fin 1/4-20 unc x 1 Gr.5 Bracket Pivot Lever Screw 5/16-18 x 5/8 TT Yellow Shoulder Bolt 5/16 -18 x.561 Plate Fastening Keeper Belt T/A Nyliner Snap-in 5/8" ID Washer Nyl Bolt, 3/8 - 16 x 1-3/4 Gr. 5 Nut Flange Hex Lock Screw 3/8-16 x 3/4 Guard Mufer Washer 13/32 x 1 x 14 Ga.

STEERING

steering_pl.lt_58

KEY NO. 95 97

PART NO. 67-19 56-16 98-16 98-12 49-12 17-27 20-00 00-12 49-17 51-04 06-13 65-14 52-19 07-12 68-13 14-00 06-02 04-19 27-04 05-15 50-15 29-19 29-11 38-54 06-18 67-16 96-12 17-19 07-12 12-18 32-16 03-11 06-16 98-17 51-19 99-17 51-17 55-18 89-78 05-64
DESCRIPTION Wheel Steering Axle Asm Fr Spindle Asm LH Spindle Asm RH Bearing Race Thrust Harden Washer 25/32 x 1-5/8 x 16 Ga. Washer 27/32 x 1-1/4 x 16 Ga. Ring Klip #t5304-75 Bearing Col Strg Blk Link Drag Washer Lock Hvy Hlcl Spr 3/8 Spacer Brace Axle Nut Hexange Lock Shaft Asm Strg Bushing Link Drag Blk LR Washer 13/32 x 7/8 x 16 Ga. Screw 3/8-16 x.75 Pin Cotter 1/8 x 3/4 Cad Rod Tie Wire Form Washer Lock Hvy HLCL Spr. 5/16 Bushing Strg Nat.623/.618Id Screw TT #10-32 x 5 x 3/8 Flange Cap Wheel Steer P/L Washer 11/32 ID x 2-3/8 OD x 12 Ga. Nut Crownlock 3/8-24 Adaptor Wheel Strg Boot Shaft Steering Washer 25/32 x 1 1/4 x 16 Ga. Extension Steering Cap Spindle Fr Top Blk Fitting Grease Spacer Brace Axle Bolt RDHD SQ 3/8-16 unc x 2-1/4 Brace Axle Steering Asm. Bracket Susp. Chassis Front Bolt Shoulder 7/16-20 Clip Steering Washer Harden.793 x 1.637 x 060 Bolt 5/16-18 unc x 4" L Gr. 5

ENGINE

OPTIONAL EQUIPMENT Spark Arrester

engine-bs.1cyl_38

KEY NO. 78 81
05-51 Control Throttle Flag Eec 04-08 Screw Hex Thd Cut 1/4-20 x 1/2 - - - - - - - - - Engine Briggs & Stratton 219807 (Order parts from engine manufacturer) 97-58 Mufer LT B&S 12/HP 52-91 Gasket Eng 84-56 Tube Drain Oil Easy 98-37 Shield Brn/Dbr Guard 06-95 Control Choke 71-80 Kit Spark Arrecter 77-50 Tank Fuel Front 1.19 77-25 Cap Asm Fuel 34-87 Clamp Hose Blk 70-40 Line Fuel 20" 16-54 Plug Drain Oil Easy 40-28 Bushing Snap Nyl Blk Fuel Line 04-12 Screw Hexwsh Thdrol 1/4-20 x 3/00 06-12 Screw Hexwsh Thdrol 3/8-16 x 3/09 14-16 Washer 9/32 x 7/8 x 16 Ga. 05-00 Washer Lock Hvy HLCL Spr. 5/19 23-34 Screw Socket HD 5/16-18 x.06 06-20 Screw 3/8-16 x 1-1/51 04-00 Nut Keps Hex 1/4-20 unc

17 seat_lt.bolt_1

KEY NO. PART NO. 10-14 05-11 06-13 16-14 50-80 06-12 41-00 06-13 16-19 55-19 27-12 12-48
KEY NO. PART NO. 04-13 43-12 12-12 39-17 18-80 05-11 08-17 19-12 70-04 08-00
DESCRIPTION Seat Bracket Pivot Bolt Fin Hex 3/8-16 unc x 1 Washer 13/32 x 1 x 10 Ga. Clip Push-In Nut Lock Hex w/Wsh 3/8-16 unc Spring Seat Cprsn Blk Zi Screw 3/8-16 x 1.5 Washer 13/32 x 1 x 14 Ga. Pan Seat Bracket Mounting Switch Bushing Snap Blk Nyl 50 Id
DESCRIPTION Bolt Rdhd Sht Nk 1/4-20 x 1-1/2 Spacer Split 28x 96 Yel Zinc Spring Cprsn Blk Pnt Nut Lock 1/4 Lge Flg Gr. 5 Zinc Bolt Shoulder 5/16-18 Unc -2A Nut Lock Hex W/Insert 5/16-18 unc Bolt Hex Black Washer 17/32 x 1-3/16 x 12 Ga. Bolt Shoulder 5/16-18 x 62 Washer Lock Hvy HLCLSPR 1/2
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

MOWER LIFT

PART NO. 84-19 80-18 88-00 00-21 16-12 01-10 94-12 45-13 98-13 98-66 KEY NO. PART NO.

lift-rh.1piece_3

KEY NO. 11 12
DESCRIPTION Wire Asm Inner W/Plunger Shaft Asm Lift Pin Groove E Ring #5133-62 Washer PLTD 21/32 x 1 x 21Ga. Bearing Nylon Blk 629 Id Grip Handle Bicycle Matte Blk Button Plunger Black Link Lift LH Link Lift RH
12 46-70 Retainer Spring 17 32-88 Link Front 35 08-00 Nut Jam Hex 1/2-13 unc 17 56-89 Trunnion 80 08-00 Nut Lock w/wsh 1/2-13 unc 13 98-68 Arm Suspension Rear 19 42-09 Pin Cotter 7/16 Bow Tie Lock 16 98-65 Bearing Pvt Lift 54 06-00 Nut Crownlock 3/8-24 NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm

MOWER DECK

143 144

42 _c lu tc h_

45 150

42_deck_man-t-path_3

KEY NO. 44
PART NO. 58-14 05-13 80-16 54-12 46-17 80-85 08-03 06-14 02-13 89-13 76-12 87-11 04-17 44-14 05-13 28-15 97-68 05-17 75-10 53-12 37-11 04-17 18-11 10-13 14-17 39-18 76-15 35-40 02-11 06-13 14-90 06-14 00-88
DESCRIPTION Housing Asm Mower 42" T-Path Bolt Rdhd Sqnk 5/16-18 unc x 3/4 Bracket Asm Fr Sway Bar 38/42 Bracket Asm Deck 42" sway Bar Retainer Spring Bar Sway Deck Bolt 3/8 - 24 x 1.25 Gr. 8 Washer Lock Hvy 3/8 Unplated Washer Hard Blade Mower Blade Mower Shaft Asm W/Lower Bearing Housing Mandrel Vented (Machd) Bearing Ball Mandrel Stripper Round Mower Bolt Carr 5/16-18 x 5/8 Bolt Shoulder Bafe Vortex 42" Nut Crown Lock 5/16-18 Bracket Deector Mower 42" Cap Sleeve 80 x 112 Blk Mower Spring Torsion Deector Nut Push Phos & Oil Shield Deector Mower 42" Washer 11/32 x 5/8 x 16 Ga. Rod Hinge 42" Wlg Screw Thdrol Washer Spacer Pulley Mandrel 42/44/50 Nut Top Lock Flng Bolt Carr. Sh 3/8-16 x 1-1/2 Gr. 5 Pulley Idler Flat Nut Lock Flg 3/8-16 unc Guard Mandrel LH Black

KEY NO. 185 ---

PART NO. 47-13 77-13 39-13 98-18 49-17 85-15 50-16 57-14 10-10 69-18 02-16 58-15 71-15 86-16 58-17 19-17 97-16 90-16 58-09 12-18 15-72 04-14 06-13 14-18 82-18 19-13 07-94
DESCRIPTION Spring Retainer 1" Zinc/cad Screw Hex Thd Cut 1/4-20 x 5/8 T Washer Hardened Smaller Bolt Shoulder 5/16-18 unc Blkz Arm Asm Pad Brake Washer Hardened Arm Idler 42" mower LT/YT Spacer Retainer Pm Mower Guard TUV Idler Knob Rd 3/8-16 Plstc Thds Blk V-Belt Mower Arm Spring Brake Mower Bracket Arm Idler 42" Keeper Belt 42" Clutch Cable Pulley Idler Flat Bolt Carriage Idler Spring Extension Spring Return Idler Retainer Spring Yellow Washer 9/32 x 3/4 x 10 Ga. Clutch Cable 42" Screw Hex Thd Cut 1/4-20 x 1/2 Bolt Rdhd Sqn 3/8-16 unc x 1-3/4 Washer 13/32 x 7/8 x 10 Ga. Head Asm. Cable Clutch Replacement Mower, Complete Mandrel Asm. (Includes Housing, Shaft and Shaft Hardware Only - Pulley Not Included)

ILLUSTRATED PARTS BREAKDOWN PARTNER 12 HP, 42 MOWER DECK LAWN TRACTOR MODEL NUMBER 12-107 (P12S105B) 00-30

176670 11.20.00 JH

TRACTOR- -MODEL NO. 12-107 (P12S105B), PRODUCT NO. 00-30

SCHEMATIC

BATTERY

A AMMETER (OPTIONAL)

M STARTER

SOLENOID

CLUTCH / BRAKE (PEDAL UP)

IGNITION SWITCH

SEAT SWITCH (NOT OCCUPIED)

BLACK BLACK

HOUR METER (OPTIONAL)
ATT'MENT CLUTCH (CLUTCH OFF)
GROUNDING CONNECTOR SPARK PLUG GAP (2 PLUGS ON TWIN CYL. ENGINES)
28 VOLTS AC MIN. @ 3600 RPM (CHARGING SYSTEM DISCONNECTED)

FUEL LINE

IGNITION UNIT
CHARGING SYSTEM OUTPUT 3 AMP DC @ 3600 RPM RED LIGHTING SYSTEM OUTPUT 5 AMP AC @ 3600 RPM
FUEL SHUT-OFF SOLENOID (IF SO EQUIPPED)

ORANGE

ALTERNATOR
14 VOLTS AC MIN. @ 3600 RPM (LIGHTS OFF)
NOTE YOUR TRACTOR IS EQUIPPED WITH A SPECIAL ALTERNATOR SYSTEM. THE LIGHTS ARE NOT CONNECTED TO THE BATTERY, BUT HAVE THEIR OWN ELECTRICAL SOURCE. BECAUSE OF THIS, THE BRIGHTNESS OF THE LIGHTS WILL CHANGE WITH ENGINE SPEED. AT IDLE THE LIGHTS WILL DIM. AS THE ENGINE IS SPEEDED UP, THE LIGHTS WILL BECOME THEIR BRIGHTEST. IGNITION SWITCH
POSITION CIRCUIT MAKE NONE A2+L NONE NONE

HEADLIGHTS

NON-REMOVABLE CONNECTIONS
REMOVABLE CONNECTIONS WIRING INSULATED CLIPS NOTE: IF WIRING INSULATED CLIPS WERE REMOVED FOR SERVICING OF UNIT, THEY SHOULD BE REPLACED TO PROPERLY SECURE YOUR WIRING.
OFF M+G+A1 RUN/LIGHT B+A1 RUN START B+A1 B + S + A1

REPAIR PARTS

ELECTRICAL

KEY NO. 48 52

PART NO. 532140844 532141940
DESCRIPTION Battery 12 Volt 25 AMP Bolt Hex Hd 1/4-20unc X 3/4 Case Battery Hng Mech W/lid Switch Interlock Push-In Harness Asm Light W/4152j Bulb Light #1156 Cable Battery 6 Ga 11" Red Cable Battery 6 Ga Red w/16 wir Fuse Nut Keps Hex 1/4-20 Unc Cable Ground 6 Ga 12" black Switch Plunger Nc Gray Switch Ign Key Harness Ing Cl Am Hm Bolt Blk Fin Hex 1/4 - 20 x 1/2 Cover Terminal Red Solenoid Adapter Ammeter Rectangular Protection Wire Loop
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm.

CHASSIS AND ENCLOSURES

145 37

208 35

KEY NO. 212 --
PART NO. 532156229 532005479
DESCRIPTION Chassis Drawbar Screw 3/8-16 x.75 Bumper Hood Dash Dash Bolt Rdhd Sqnk 3/8-16unc X 1 Panel Dash LH Clip Tinnerman Grille P/L Panel Dash RH Hood Bumper Hood Bolt Fin Hex 3/8-16unc X 1 Gr. 5 Washer 13/32 X 13/16 X 12 Ga. Nut Lock Hex w/Ins 3/8-16 Unc Grille Private Label Lens Grille Private Label Fender Bracket Fender Repl 109873x Footrest Pnt LH Footrest Pnt RH Bolt Rdhd Sht Sqnk 3/8-16 X3/4 Screw Thdrol 5/16-18 x 1/2 Tyt Bracket Asm Pivot Mower Rear Nut Lock w/Insert 1/4-20 Washer 9/32 x 7/8 x 16 Ga. Bracket Grille LH Screw Hex Wshd 8-18 x 7/8 Bracket Grille RH Bolt Hex 1/4-20 x 3/4 Air Duct Private Label Dash Lower STLT Plate Reinforcement STLT Rod Pivot Chassis/Hood Bolt Shoulder 5/16-18 Screw Thdrol 5/16-18 x 1/2 Screw Thdrol 3/8-16 x 1/2 Insert Lens REFLECT Plug Button Blk 359 Dia Choke

151 51

KEY PART NO. NO. 1 --------532130801 532127274
DESCRIPTION Transaxle (Order Parts From Transaxle Manufactuer) Peerless 205-544C Spring Return Brake T/a Zinc Pulley Transaxle 18" tires Ring Retainer # 5100-62 Strap Torque 30 Degrees Screw Thdrol 5/16-18 X 3/4 TYT Rod Shift Fender Adjust STLT Pin Cotter 1/8 X 1 Cad Washer Plate Shf 388 Sq Hole Bolt 1/4-28 Unf Gr 8 W/Patch Washer Lock Hvy Helical 1/4 Nut Lock Hx W/Ins 5/16-18 Unc Pl Bolt, Fin Hex 3/8-16 UNC x 1 Gr. 5 Nut Lock 3/8-16 Unc Knob Rod Brake Blk Zinc Nut Hex Jam 3/8-16 Unc Spring Rod Brake Zinc Washer 13/32 X 13/16 X 16 Ga Pin Cotter 1/8 X 3/4 Cad Rod Brake Parking LT/YT Cap Brake Parking Black Bracket Mtg Transaxle Keeper Belt LH LT 14 Ga Bolt Hex Hd 5/16-18unc X 3/4 Shaft Asm Pedal Foot Bearing Nylon Blk 629 Id Washer 21/32 X 1 X 16 Ga Pin Roll 3/16 X 1" Pulley Idler Flat Bolt Rdhd 3/8-16unc X 2-3/4 Gr 5 Spacer Split 395 X 59 Bzp Keeper Belt Idler Flat Washer 13/32 X 13/16 X 12 Ga Pulley Idler V Groove Plastic Bellcrank Clutch Grnd Drv Stl Retainer Belt Style Spring Bolt Hex Hd 3/8-16unc X 1-1/2 Nut Crownlock 3/8-16 Unc Nut Crownlock 5/16-18 Unc Link Clutch Spring Return Clutch Bolt Fin Hx 3/8-16 X 1/4 V-Belt Ground Drive Keeper Belt RH LT Pnt/zinc 16g

KEY NO. 80 81

DESCRIPTION Keeper Belt Span Ctr Screw 3/8-16x3/4 Cover Pedal Round Engine Pulley LT/YT Bolt Hex Washer Lock Hvy Hlcl Spr 7/16 Keeper Belt Engine Foolproof Screw Hex Wsh Hi-Lo 1/4-1/2 Guide Belt Mower Drive RH Washer 13/32 X 1-1/4 X 12 Ga Spacer Axle Washer 25/32 X 1 1/4 X 16 Ga E-ring #5133-75 Key Square X 1845/ 1865 Washer 25/32 X 1-5/8 X 16 Ga Key Woodruff #9 3/16 x 3/4 Arm Shift Shaft Asm Cross Tapered DA/PR 18" Spring Torsion T/a Washer 17/32 X 3/4 X 16 Ga Transaxle Link Nut Lock Center 1/4 - 28 FNTHD Console Shift STLT Retainer Spring 1" Washer 9/32 x 3/4 x 10 Ga. Strap Torque LT Bolt Rdhd Sq Neck 3/8-16 x 1.874490540 Bolt Hex Flg Hd 5/16-18 Gr 532165850 Bushing Bellcrank Washer 13/32 x 2 x 10 Ga. Washer Srrted 5/16ID x 1.125 Bracket Shift Mount Hub Tapered Flange Shift Lt Bolt Rdhd Sqnk 1/4-20 x 3/4 Gr 873680400 Nut Crownlock 1/4-20 Unc Bolt Hex Fin 1/4-20 Unc x 1 Gr 5 Washer 5/8 x.281 x 10 Ga Bracket Pivot Lever Screw 5/16-18 x 5/532165492 Bolt Shoulder 5/16-18 x.532165580 Plate Fastening STLT/CRD Nyliner Snap-In 5/8" ID Washer Nyl 7/8 Id x.105" Hyd Bolt Carr Sh 3/8-16 x 1-1/2 Gr 5 NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm
PART NO. 532131486 532165594

STEERING ASSEMBLY

KEY NO. PART NO. 532169835 532133835
DESCRIPTION Wheel Steering Axle Asm Fr Spindle Asm LH Spindle Asm RH Bearing Race Thrust Harden Washer 25/32 x 1-5/8 x 16 Ga Washer 27/32 x 1-1/4 x 16 Ga Ring Klip #t5304-75 Bearing Col Strg Blk Link Drag Washer Lock Hvy Hlcl Spr 3/8 Spacer Brace Axle Nut Hexflange Lock Shaft Asm Strg Washer Thrust 515 x 750 x 033 Support Shaft Screw Hex Wshhd Torx Shaft Asm Pittman Bracket Steering Bushing Link Drag Blk LR Gear Sector Washer 13/32 x 7/8 x 16 Ga Screw 3/8-16 x.75 Pin Cotter 1/8 x 3/4 Cad Rod Tie Wire Form Mech Bushing Strg Nat.623/.618Id Screw TT #10-32 x 5 x 3/8 Flange Cap Wheel Steer P/L Washer 13/32 x 2-3/8 x 12 Ga Nut Lock Center 3/8-24unf Adaptor Wheel Strg Boot Shaft Steering Washer 25/32 X 1 1/4 X 16 Ga Extension Steering Cap Spindle Fr Top Blk Fitting Grease Nut Lock Hx w/Ins 5/16-18 Unc Bolt Fin Hex 5/16-18 Unc x 1-1/4 Kit Steering Assembly Serv Bolt Fin Hex 3/8-16 UNC Gr. 5 Spacer Brace Axle Bearing Arm Pittman Bolt RDHD SQ 3/8-16 UNC x 2-1/4 Brace Axle Washer 13/32 x 1-1/4 x 12 Ga. Bolt Hex Nylon 3/8-16 x 3/4 Bracket Susp. Chassis Front Fastener Christmas Tree

SEAT ASSEMBLY

KEY NO. 12 13
PART NO. 532121246 532121248
DESCRIPTION Seat Bracket Pivot Seat Bolt Fin Hex 3/8-16unc X 1 Washer 13/32 X 1 X 10 Ga Clip Push-In Nut Lock Hex w/Wsh 3/8-16 Unc Spring Seat Cprsn Blk Zi Screw 3/8-16 X 1.5 Washer 13/32 X 1 X 14 Ga. Pan Seat Bracket Mounting Switch Bushing Snap Blk Nyl 50 Id

KEY PART NO. NO. DESCRIPTION Bolt Rdhd Sht Nk 1/4-20x1-1/532134300 Spacer Split 28x 96 Yel Zinc Spring Cprsn Blk Pnt Nut Lock 1/4 Lge Flg Gr 5 Zinc Bolt Shoulder 5/16-18 Unc -2A Nut Lock Hex W/Insert 5/16-18 UNC Bolt Hex Washer 17/32 X 1-3/16 X 12 Ga. Bolt Shoulder 5/16-18 X 810040800 Washer Lock Hvy HLCLSPR 1/2 NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

DECALS

KEY NO. 11 PART NO. 532145494 KEY NO. 19 ----PART NO. 532176665
DESCRIPTION Decal Europe Stand CE Decal Bat Dan/Poi P/L Symbols Decal Hood LH Decal Hood RH Decal Engine Decal Chas. Turbo Collection Decal Saddle Brake Parking Decal Fender Bernard Decal Read Owners Manual Syms Decal Chassis Hot Muffler Decal Mower Cut finger Symbol
DESCRIPTION Decal 100 Dba Decal Strg Wheel Cap Decal Logo Grille Decal Brake/Clutch Decal V-Belt Sch Decal Drawbar Load Limit Decal Lift Handle (Lift Handle) Manual Operator's Euro Manual Operator's Scan

WHEELS & TIRES

5,8 4,10

7 3,11

KEY NO. 11

PART NO. 532175039

DESCRIPTION Cap Valve Tire Stem Valve Tire R 18 X 9.5 - 8 Service Tube Front (Service Item Only) Rim Asm 6" front Yellow Service Fitting Grease (Front Wheel Only) Bearing Flange (Front Wheel Only) Rim Asm 8" rear Yellow Service Tire R Ts 18 x 9.5-8 C. Service Tube Rear (Service Item Only) Cap Axle Blk X 1 00
NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm

ENGINE

OPTIONAL EQUIPMENT Spark Arrester
KEY PART NO. NO. 3 --------817060620 873510400
DESCRIPTION Control Th/ch Flag Eec Screw Hex Thd Cut 1/4-20 x 5/8 T Engine B&S Model No. 289707 (Order parts from engine manufacturer) Muffler LT B&S 12/HP Gasket Eng Tube Oil Drain Easy Washer Lock Ext Tooth 3/8 Shield Brn/Dbr Guard Kit Spark Arrecter Tank Fuel Front 1.25 Cap Asm Fuel W/sym Vented Clamp Hose Blk Line Fuel 20" Plug Oil Drain Easy Bushing Snap Nyl Blk Fuel Line Screw Hexwsh Thdrol 1/4-20 x 3/4 Screw Hexwsh Thdrol 3/8-16 x 3/4 Washer 9/32 x 7/8 x 16 Ga. Washer Lock Hvy Hlcl Spr 5/16 Stop Throt 3000 Rpm Screw Hexhd Cap 5/16-18x3/4 Screw 3/8-16 x 1-1/4 Nut Keps Hex 1/4-20 UNC

MOWER LIFT

KEY NO. 32

PART NO. 873540600

DESCRIPTION Wire Asm Inner W/Plunger Shaft Asm Lift Pin Groove E Ring #5133-62 Washer PLTD 21/32 X 1 X 21ga Bearing Nylon Blk 629 Id Grip Handle Bicycle Matte Blk Button Plunger Black Link Lift LH Link Lift RH Retainer Spring Link Front Nut Jam Hex 1/2-13 Unc Trunnion Blk Zinc Nut Lock W/Wsh 1/2-13 Unc Arm Suspension Rear Retainer Spring Bearing Pvt Lift Nut Crownlock 3/8-24

155 67

KEY NO. 40 44
PART NO. 873680600 532140088
DESCRIPTION Housing Asm Mower 42" T-Path Bolt Rdhd Sqnk 5/16-18unc X3/4 Bracket Asm Fr Sway Bar 38/42 Bracket Asm Deck 42" sway Bar Retainer Spring Arm Suspension Rear Bolt 3/8 - 24 X 1.25 Gr 8 Washer Lock Hvy 3/8 Unplated Washer Hard Blade Mower Blade Mower High Lift Shaft Asm W/Lower Bearing Housing Mandrel Vented (Machd) Bearing Ball Mandrel Stripper Round Mower Bolt Carr 5/16-18 X 5/8 Bolt Shoulder Baffle Vortex 42" Nut Crown Lock 5/16-18 Stiffener Bracket 42" deck Bracket Deflector Mower 42" Cap Sleeve 80x 112 Blk Mower Spring Torsion Deflector Nut Push Phos & Oil Shield Deflector Mower 42" Washer 11/32 X 5/8 X 16 Ga. Rod Hinge 42" Wlg Screw Thdrol Washer Head Washer Spacer Mower Vented Pulley Mandrel 42/44/50 Nut 9/16 Top Lock Flng Oil Dip Bolt Rdhd 3/8-16unc X 1-3/4 Gr5 Fastner Christmas Tree Pulley Idler Flat Washer 13/32 X 13/16 X 16 Nut, Crownlock 3/8-16 UNC Guard Mandrel LH Black

KEY NO. ---

PART NO. 532171639 532130794

DESCRIPTION

Spring Retainer 1" Zinc/cad Screw Hex Thd Cut 1/4-20x5/8 T Washer Hardened Smaller Roller Asm Cam Follower 42" dec Bolt Shldr 10-24 Zinc Gr 5 42" Nut Lock #10-24 Unc Bolt Shoulder 5/16-18 Unc Blkz Arm Asm Pad Brake Washer Hardened Arm Idler 42" mower LT/YT Spacer Retainer Pm Mower Guard TUV Idler Knob Rd 3/8-16 Plstc Thds Blk V-Belt Mower Arm Spring Brake Mower Bracket Arm Idler 42" Keeper Belt 42" Clutch Cable Pulley Idler Flat Bolt Carriage Idler Spring Extension Spring Return Idler Retainer Spring Yellow Washer 9/32 x 3/4 x 16 Ga. Bracket Clutch Cable Clutch Cable 42" Washer Flat 3/8" Type B Spring Retainer Spring Retention Lvr Cltch Cab Spacer Clutch Cable Rod Clutch Cable 3/8" Screw Hex Thd Cut 1/4-20 x 5/8 Bolt Rdhd Sqn 3/8-16 UNC x 1-3/4 Deck Serv 42" Mandrel Asm Service (Includes Key Nos. 8-10, 12-15, 31 and 33) NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm