ILLUSTRATED PARTS BREAKDOWN PARTNER 12.5 HP, 42 MOWER DECK LAWN TRACTOR MODEL NUMBER P12107H (96011004600) PRODUCT NUMBER 00-46
194511 Rev. 2 3.18.05 RD/rad

REPAIR PARTS

TRACTOR - - MODEL NUMBER P12107H (96011004600), PRODUCT NO. 00-46

ELECTRICAL

179720

KEY NO. 90

PART NO. 34-76 04-17 66-17 61-18 37-00 41-12 47-14 61-17 51-51 04-12 47-12 13-17 55-14 04-17 97-11 04-13 15-17 88-14 08-14 19-18 04-49
DESCRIPTION Battery 12 Volt 25 Amp Bolt Hex Hd 1/4-20 unc x 3/4 Case Battery Mech Hiinge Switch Interlock Push-In Harness Asm Light W/4152j Bulb Light #1156 Cable Battery 6 Ga. 11"red Cable Battery Fuse Nut Keps Hex 1/4-20 Unc Cable Ground 6 Ga 12"black Switch Plunger Nc Gray Switch Ign Key Ign Harness Ign Bolt Blk Fin Hex 1/4-20 Cover Terminal Red Solenoid Adapter Ammeter Protection Wire Loop Cover Terminal Battery
NOTE: All component dimensions given in U. S. inches 1 inch = 25.4 mm.

CHASSIS

29 212
209 chassis-Laser -lt.stlt_208

KEY NO. ---

PART NO. 46-17 65-15 52-19 48-14 06-17 49-18 69-49 06-18 58-18 49-78 06-13 13-80 06-18 35-18 58-19 48-13 66-18 30-18 30-11 06-49 05-17 57-17 47-15 47-17 57-15 65-17 01-67 05-67 06-00 06-18 35-19 16-19 39-00 54-79
DESCRIPTION Chassis Drawbar Bumper Hood Dash Dash Bolt Rdhd Sqnk 3/8-16unc x 1 Panel Dash LH Panel Dash RH Screw Thdrol 3/8-16 x 1/2 Hood Bumper Hood Bolt Fin Hex 3/8-16unc x 1 Gr. 5 Washer 13/32 x 13/16 x 12 Ga. Nut Lock Hex w/Ins 3/8-16 unc Grille/Lens Asm (Includes Key #'s 29, 212) Lens Grille Fender Bracket Fender Repl 109873x Footrest Pnt LH Footrest Pnt RH Bolt Rdhd Sht Sqnk 3/8-16 X3/4 Screw Thdrol 5/16-18 x 1/2 Tyt Bracket Asm Pivot Mower Rear Bracket Pivot Laser Dash Lower STLT Plate Reinforcement STLT Rod Pivot Chassis/Hood Bolt Shoulder 5/16-18 Screw Thdrol 5/16-18 x 1/2 Screw Thdrol 3/8-16 x 1/2 Screw Hex Wsh Thdr 3/8-16 x 3/4 Insert Lens Reective Screw 10 x 3/4 Single Lead Hex Plug Switch Light Plug Button
NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm.

120 57

263 199

263 75

drive-hydro_35

KEY NO. 66 69

PART NO. -------27-02 04-04 04-49 05-80 05-80 06-10 69-16 94-35 06-10 68-13 13-02 04-17 57-07 16-17 49-76 05-17 55-12 01-21 16-12 49-17 91-11 06-17 55-12 77-15 44-12 32-11 06-68 06-68 05-10 57-10 57-76 06-14 02-16 96-12 06-12 48-18 02-17 39-04 07-15 47-14 24-32
DESCRIPTION Transaxle Hydro Gr 322-0510 (Order parts from transaxle manufacturer) Rod Shift Fender Pin Cotter 1/8 x 1 CAD Washer Lock Hvy Helical 1/4 Bolt Hex Flg Hd 5/16-18 x Gr.5 Nut Lock Hex W/Ins. 5/16-18 unc P Nut Lock Hex W/Wsh 3/8-16 unc Knob Rod, Brake Hydro Nut Spring, Brake Rod Washer Pin Cotter 1/8 x 3/4 CAD. Rod, Parking Brake Cap, Parking Brake Bracket, Transaxle Bolt Hex Hd 5/16-18 unc x 3/4 Shaft, Foot Pedal Bearing, Nylon Washer Pin, Roll Pulley, Idler, Composite Bolt RDHD 3/8-16 unc x 2-3/4 Gr. 5 Keeper, Belt Idler Pulley, Idler, V-Groove Bellcrank Clutch Grnd Drv Stl Retainer, Belt Bolt Carr. Sh 3/8-16 x 1-1/2 Gr. 5 Nut Crownlock 3/8-16 Nut Crownlock 5/16-18 Link, Clutch Spring, Return, Clutch Bolt Fin Hex 3/8-16 unc x 1-1/4 V-Belt, Ground Drive Keeper, Center Span Screw 3/8-16 x.875 Cover, Pedal Pulley, Eng Bolt Hex 7/16-20 x 4 Gr. 5 - 1. 5 THR Washer Keeper Belt Engine Screw Hex Wsh 1/4-1/2 unc

KEY NO. 275

PART NO. 02-16 91-16 91-13 70-12 17-00 00-12 35-12 17-16 55-16 57-17 12-16 98-19 49-17 02-12 47-94 08-09 12-14 06-90 06-17 54-13 32-16 60-16 55-18 39-14 04-68 04-78 04-16 56-49 05-16 54-16 55-16 96-16 95-16 96-14 05-11 06-17 16-14 52-00 06-18 24-13 16-14
DESCRIPTION Guide Belt Mower Drive RH Strap Torque Lh Hydro Strap Torque Rh Hydro Spacer, Axle Washer 25/32 x 1-1/4 x 16 Gauge E-Ring Key, Square Washer 25/32 x 1-5/8 x 16 Gauge Shaft Asm. Cross Hydro Spring Torsion T/A Washer 17/32 x 3/4 x 16 Ga. Link Transaxle Console, Shift Control Asm Bypass Hydro Retainer Spring 1" Zinc/Cad Nut Hex Jam Toplock 1/2-20 unf Washer 9/32 x 3/4 x 10 Ga. Bolt 3/8-16 Unc x 1 Nut Lock 3/8-16 Unc Spacer Retainer Washer 13/32 x 2 x 10 Ga. Washer Srrtd 5/16 ID x 1.0 x.125 Tk Bracket Shift Mount Hub Tapered Flange Shift LT Bolt Rdhd Sqnk 1/4-20 x 3/4 Gr. 5 Nut Crownlock 1/4-20 Unc Bolt Hex Fin 1/4-20 unc x 1 Gr. 5 Bracket Pivot Lever Screw 5/16-18 x 5/8 Bolt Shoulder 5/16-18 x.561 TT Plate Fastening Nyliner Snap-In 5/8" ID Washer Nyl 7/8 ID x.105 HYD CRD Bolt Shoulder 5/16-18 unc Bolt Rdhd Sqnk 5/16-18 unc x 1 Bolt Carr Sh 3/8-16 x 1-3/4 Gr. 5 Washer 17/32 x 1 x 16 Ga. Nut Hexange Lock Screw Hex Wsh Thdr. 3/8-16 x 3 Guard Mufer RH Washer 13/32 x 1 x 14 Ga.

NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm

STEERING

steering_pl.lt_58

KEY NO. 95 97

PART NO. 67-17 51-16 98-16 98-12 49-12 17-27 20-00 00-12 49-17 51-04 06-13 65-14 52-19 07-12 68-13 14-00 06-02 04-19 27-04 05-15 50-15 29-19 29-11 38-54 06-18 67-16 96-12 17-19 07-12 12-18 32-16 03-11 06-16 98-17 51-16 98-17 51-17 55-18 89-78 05-64
DESCRIPTION Wheel Steering Axle Asm Fr Spindle Asm LH Spindle Asm RH Bearing Race Thrust Harden Washer 25/32 x 1-5/8 x 16 Ga. Washer 27/32 x 1-1/4 x 16 Ga. Ring Klip #t5304-75 Bearing Col Strg Blk Link Drag Washer Lock Hvy Hlcl Spr 3/8 Spacer Brace Axle Nut Hexange Lock Shaft Asm Strg Bushing Link Drag Blk LR Washer 13/32 x 7/8 x 16 Ga. Screw 3/8-16 x.75 Pin Cotter 1/8 x 3/4 Cad Rod Tie Wire Form Washer Lock Hvy HLCL Spr. 5/16 Bushing Strg Nat.623/.618Id Screw TT #10-32 x 5 x 3/8 Flange Cap Wheel Steer P/L Washer 11/32 ID x 2-3/8 OD x 12 Ga. Nut Crownlock 3/8-24 Adaptor Wheel Strg Boot Shaft Steering Washer 25/32 x 1 1/4 x 16 Ga. Extension Steering Cap Spindle Fr Top Blk Fitting Grease Spacer Brace Axle Bolt RDHD SQ 3/8-16 unc x 2-1/4 Brace Axle Steering Asm. Bracket Susp. Chassis Front Bolt Shoulder 7/16-20 Clip Steering Washer Harden.793 x 1.637 x 060 Bolt 5/16-18 UNC x 4" L Gr. 5

ENGINE

OPTIONAL EQUIPMENT Spark Arrester

engine-bs.1cyl_38

KEY NO. 78 81

PART NO.

DESCRIPTION
05-51 Control Throttle Flag Eec 04-08 Screw Hex Thd Cut 1/4-20 x 1/2 - - - - - - - - - Engine Briggs & Stratton 219707 (Order parts from engine manufacturer) 97-58 Mufer LT B&S 12/HP 52-91 Gasket Eng 84-56 Tube Drain Oil Easy 98-37 Shield Brn/Dbr Guard 06-95 Control Choke 71-80 Kit Spark Arrecter 77-50 Tank Fuel Front 1.14 05-27 Cap Asm Fuel W/sym Vented 34-87 Clamp Hose Blk 70-40 Line Fuel 20" 16-54 Plug Drain Oil Easy 40-28 Bushing Snap Nyl Blk Fuel Line 04-12 Screw Hexwsh Thdrol 1/4-20 x 3/00 06-12 Screw Hexwsh Thdrol 3/8-16 x 3/09 14-16 Washer 9/32 x 7/8 x 16 Ga. 05-00 Washer Lock Hvy HLCL Spr. 5/07 05-12 Screw Hex Hd Cap 5/16-18 x 3/06 06-20 Screw 3/8-16 x 1-1/51 04-00 Nut Keps Hex 1/4-20 unc

seat_lt.bolt_1

KEY NO. PART NO. 53-14 05-11 06-13 16-14 50-80 06-12 41-00 06-13 16-18 24-12 12-12 12-48
KEY NO. PART NO. 04-13 43-12 12-12 39-17 18-80 05-11 08-17 19-12 70-04 08-00
DESCRIPTION Seat Bracket Pivot Bolt Fin Hex 3/8-16 unc x 1 Washer 13/32 x 1 x 10 Ga. Clip Push-In Nut Lock Hex w/Wsh 3/8-16 unc Spring Seat Cprsn Blk Zi Screw 3/8-16 x 1.5 Washer 13/32 x 1 x 14 Ga. Pan Seat Bracket Mounting Switch Bushing Snap Blk Nyl 50 Id

DESCRIPTION Bolt Rdhd Sht Nk 1/4-20 x 1-1/2 Spacer Split 28x 96 Yel Zinc Spring Cprsn Blk Pnt Nut Lock 1/4 Lge Flg Gr. 5 Zinc Bolt Shoulder 5/16-18 Unc -2A Nut Lock Hex W/Insert 5/16-18 unc Bolt Hex Black Washer 17/32 x 1-3/16 x 12 Ga. Bolt Shoulder 5/16-18 x 62 Washer Lock Hvy HLCLSPR 1/2
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

DECALS

KEY NO. 11 12
PART NO. 50-18 56-18 48-18 56-14 08-18 99-14 54-15 97-18 21-18 04-32
DESCRIPTION Decal Bat Dan/Poi P/L Symbols Decal Hood Decal Engine Decal Chas. Turbo Collection Decal Saddle Brake Parking Decal Fender Decal Read Owners Manual Syms Decal Chassis Hot Mufer Decal Mower Cut nger Symbol Decal 100 Db/CE

KEY NO. ------

PART NO. 56-15 97-17 91-16 03-16 25-13 83-16 69-18 52-18 52-37
DESCRIPTION Decal Strg Wheel Cap Decal Brake/Clutch Decal Deck "B" Decal V-Belt Sch Decal Drawbar Load Limit Decal Lift Handle (Lift Handle) Decal Bypass Manual Operator's Euro Manual Operator's Scan

WHEELS & TIRES

5,8 4,10

7 3,11

KEY NO. 11
PART NO. 91-06 51-12 41-05 99-12 51-12 49-12 49-12 51-12 39-12 49-17 50-39
DESCRIPTION Cap Valve Tire Stem Valve Tire F Ts 15 X - 6 Service Tube Front (Service Item Only) Rim Asm 6" front Yellow Service Fitting Grease (Front Wheel Only) Bearing Flange (Front Wheel Only) Rim Asm 8" rear Yellow Service Tire R Ts 18 x 8.5-8 C. Service Tube Rear (Service Item Only) Cap Axle Blk X 1 00

MOWER LIFT

lift-rh.1piece_3

KEY NO. 32

PART NO. 94-15 94-18 88-00 00-21 16-12 01-10 94-12 45-13 98-13 98-12 46-17 32-35 08-17 56-80 08-13 98-16 35-16 98-54 06-00
DESCRIPTION Wire Asm Inner W/Plunger Shaft Asm Lift Pin Groove E Ring #5133-62 Washer PLTD 21/32 x 1 x 21Ga. Bearing Nylon Blk 629 Id Grip Handle Bicycle Matte Blk Button Plunger Black Link Lift LH Link Lift RH Retainer Spring Link Front Nut Jam Hex 1/2-13 unc Trunnion Nut Lock w/wsh 1/2-13 unc Arm Suspension Rear Retainer Spring Bearing Pvt Lift Nut Crownlock 3/8-24

MOWER DECK

42 _c lu

45 150

59 148

42_deck_man-t-path_3

KEY NO. 44
PART NO. 58-14 05-13 80-16 54-12 46-17 80-85 08-03 06-14 02-13 89-13 76-12 87-11 04-17 44-14 05-13 28-15 97-68 05-17 75-10 53-12 37-11 04-17 18-11 10-13 14-17 39-18 76-15 35-17 83-11 06-13 14-90 06-14 00-88
DESCRIPTION Housing Asm Mower 42" T-Path Bolt Rdhd Sqnk 5/16-18unc x3/4 Bracket Asm Fr Sway Bar 38/42 Bracket Asm Deck 42" sway Bar Retainer Spring Bar Sway Deck Bolt 3/8 - 24 x 1.25 Gr. 8 Washer Lock Hvy 3/8 Unplated Washer Hard Blade Mower Blade Mower Shaft Asm W/Lower Bearing Housing Mandrel Vented (Machd) Bearing Ball Mandrel Stripper Round Mower Bolt Carr 5/16-18 x 5/8 Bolt Shoulder Bafe Vortex 42" Nut Crown Lock 5/16-18 Bracket Deector Mower 42" Cap Sleeve 80 x 112 Blk Mower Spring Torsion Deector Nut Push Phos & Oil Shield Deector Mower 42" Washer 11/32 x 5/8 x 16 Ga. Rod Hinge 42" Wlg Screw Thdrol Washer Spacer Pulley Mandrel 42/44/50 Nut Top Lock Flng Bolt Carr. Sh 3/8-16 x 1-1/2 Gr. 5 Pulley Idler Flat Nut Lock Flg 3/8-16 unc Guard Mandrel LH Black

KEY NO. 185 ---

PART NO. 47-13 77-13 39-13 98-18 49-17 85-15 50-16 57-14 10-10 69-18 02-16 58-15 71-15 86-16 58-17 19-17 97-16 90-16 58-09 12-18 15-72 04-14 06-13 14-18 82-18 19-13 07-94
DESCRIPTION Spring Retainer 1" Zinc/cad Screw Hex Thd Cut 1/4-20x5/8 T Washer Hardened Smaller Bolt Shoulder 5/16-18 Unc Blkz Arm Asm Pad Brake Washer Hardened Arm Idler 42" mower LT/YT Spacer Retainer Pm Mower Guard TUV Idler Knob Rd 3/8-16 Plstc Thds Blk V-Belt Mower Arm Spring Brake Mower Bracket Arm Idler 42" Keeper Belt 42" Clutch Cable Pulley Idler Flat Bolt Carriage Idler Spring Extension Spring Return Idler Retainer Spring Yellow Washer 9/32 x 3/4 x 10 Ga. Clutch Cable 42" Screw Hex Thd Cut 1/4-20 x 1/2 Bolt Rdhd Sqn 3/8-16 unc x 1-3/4 Washer 13/32 x 7/8 x 10 Ga. Head Asm. Cable Clutch Replacement Mower, Complete Mandrel Asm. (Includes Housing, Shaft and Shaft Hardware Only - Pulley Not Included)

SCHEMATIC

BATTERY

A AMMETER (OPTIONAL)

M STARTER

SOLENOID

CLUTCH / BRAKE (PEDAL UP)

IGNITION SWITCH

SEAT SWITCH (NOT OCCUPIED)

BLACK BLACK

HOUR METER (OPTIONAL)
ATT'MENT CLUTCH (CLUTCH OFF)
GROUNDING CONNECTOR SPARK PLUG GAP (2 PLUGS ON TWIN CYL. ENGINES)
28 VOLTS AC MIN. @ 3600 RPM (CHARGING SYSTEM DISCONNECTED)

FUEL LINE

IGNITION UNIT
CHARGING SYSTEM OUTPUT 3 AMP DC @ 3600 RPM
FUEL SHUT-OFF SOLENOID (IF SO EQUIPPED)

ORANGE

RED LIGHTING SYSTEM OUTPUT 5 AMP AC @ 3600 RPM

ALTERNATOR

14 VOLTS AC MIN. @ 3600 RPM (LIGHTS OFF)
NOTE YOUR TRACTOR IS EQUIPPED WITH A SPECIAL ALTERNATOR SYSTEM. THE LIGHTS ARE NOT CONNECTED TO THE BATTERY, BUT HAVE THEIR OWN ELECTRICAL SOURCE. BECAUSE OF THIS, THE BRIGHTNESS OF THE LIGHTS WILL CHANGE WITH ENGINE SPEED. AT IDLE THE LIGHTS WILL DIM. AS THE ENGINE IS SPEEDED UP, THE LIGHTS WILL BECOME THEIR BRIGHTEST. IGNITION SWITCH

POSITION CIRCUIT MAKE NONE A2+L NONE NONE OFF M+G+A1 RUN/LIGHT B+A1 RUN START B+A1 B + S + A1

HEADLIGHTS

NON-REMOVABLE CONNECTIONS
WIRING INSULATED CLIPS NOTE: IF WIRING INSULATED CLIPS WERE REMOVED FOR SERVICING OF UNIT, THEY SHOULD BE REPLACED TO PROPERLY SECURE YOUR WIRING.

REMOVABLE CONNECTIONS

ILLUSTRATED PARTS LIST MFG ID NO. 96011018600 CUSTOMER CATALOG NO. P12107H PRODUCT NO. 01-86

402631

11.10.05 VB

REPAIR PARTS

TRACTOR - - MODEL NUMBER P12107H (96011018600), PRODUCT NO. 01-86

ELECTRICAL

197428

KEY NO. 94

PART NO. 34-76 04-17 66-17 61-18 37-00 41-12 47-14 61-17 51-51 04-12 47-19 27-19 33-14 04-11 07-19 74-11 04-13 15-19 25-14 08-14 19-18 04-19 66-19 25-19 18-34
DESCRIPTION Battery 12 Volt 25 Amp Bolt Hex Hd 1/4-20 unc x 3/4 Case Battery Mech Hiinge Switch Interlock Push-In Harness Asm Light W/4152j Bulb Light #1156 Cable Battery 6 Ga. 11"red Cable Battery Fuse Nut Keps Hex 1/4-20 Unc Cable Ground 6 Ga 12"black Switch Seat Switch Ign Key Ign Switch Light/Reset B/B/Red Harness Ign Bolt Blk Fin Hex 1/4-20 Cover Terminal Red Solenoid Adapter Ammeter Protection Wire Loop Cover Terminal Battery Harness Pigtail consle ROS Screw Plastite 10-14 x 2.0 Module Reverse ROS
NOTE: All component dimensions given in U. S. inches 1 inch = 25.4 mm.

CHASSIS

29 212

208 11

207 26

145 37

chassis_elite value_stlt_2

KEY NO. --

PART NO. 46-17 65-15 52-19 48-14 06-17 49-18 69-49 06-18 65-18 49-78 06-13 13-80 06-18 35-18 58-19 41-13 66-18 25-18 25-11 06-49 05-17 57-17 47-15 47-17 57-15 65-17 01-67 05-67 06-00 06-18 35-19 16-00 54-79
DESCRIPTION Chassis Drawbar Bumper Hood Dash Dash Bolt Rdhd Sqnk 3/8-16unc x 1 Panel Dash LH Panel Dash RH Screw Thdrol 3/8-16 x 1/2 Hood Bumper Hood Bolt Fin Hex 3/8-16unc x 1 Gr. 5 Washer 13/32 x 13/16 x 12 Ga. Nut Lock Hex w/Ins 3/8-16 unc Grille/Lens Asm (Includes Key #'s 29, 212) Lens Grille Fender Bracket Fender Repl 109873x Footrest Pnt LH Footrest Pnt RH Bolt Rdhd Sht Sqnk 3/8-16 X3/4 Screw Thdrol 5/16-18 x 1/2 Tyt Bracket Asm Pivot Mower Rear Bracket Pivot Laser Dash Lower STLT Plate Reinforcement STLT Rod Pivot Chassis/Hood Bolt Shoulder 5/16-18 Screw Thdrol 5/16-18 x 1/2 Screw Thdrol 3/8-16 x 1/2 Screw Hex Wsh Thdr 3/8-16 x 3/4 Insert Lens Reective Screw 10 x 3/4 Single Lead Hex Plug Button
NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm.

120 57

163 168

156 166

263 199

drive-hydro_35

KEY NO. 66 69
PART NO. -------27-02 04-04 04-49 05-80 05-80 06-10 69-16 94-35 06-10 68-13 13-02 04-17 57-07 16-17 49-76 05-17 55-12 01-21 16-12 49-17 91-11 06-17 55-12 77-15 44-12 32-11 06-68 06-68 05-19 96-10 57-76 06-14 02-16 96-12 06-12 48-18 02-17 39-04 07-15 47-14 24-32
DESCRIPTION Transaxle Hydro Gr 322-0510 (Order parts from transaxle manufacturer) Rod Shift Fender Pin Cotter 1/8 x 1 CAD Washer Lock Hvy Helical 1/4 Bolt Hex Flg Hd 5/16-18 x Gr.5 Nut Lock Hex W/Ins. 5/16-18 unc P Nut Lock Hex W/Wsh 3/8-16 unc Knob Rod, Brake Hydro Nut Spring, Brake Rod Washer Pin Cotter 1/8 x 3/4 CAD. Rod, Parking Brake Cap, Parking Brake Bracket, Transaxle Bolt Hex Hd 5/16-18 unc x 3/4 Shaft, Foot Pedal Bearing, Nylon Washer Pin, Roll Pulley, Idler, Composite Bolt RDHD 3/8-16 unc x 2-3/4 Gr. 5 Keeper, Belt Idler Pulley, Idler, V-Groove Bellcrank Clutch Grnd Drv Stl Retainer, Belt Bolt Carr. Sh 3/8-16 x 1-1/2 Gr. 5 Nut Crownlock 3/8-16 Nut Crownlock 5/16-18 Link, Clutch Spring, Return, Clutch Bolt Fin Hex 3/8-16 unc x 1-1/4 V-Belt, Ground Drive Keeper, Center Span Screw 3/8-16 x.875 Cover, Pedal Pulley, Eng Bolt Hex 7/16-20 x 4 Gr. 5 - 1. 5 THR Washer Keeper Belt Engine Screw Hex Wsh 1/4-1/2 unc

KEY NO. 275

PART NO. 02-16 91-16 91-13 70-12 17-00 00-12 35-12 17-16 55-16 57-17 12-16 98-19 49-17 02-12 47-94 08-09 12-14 06-90 06-17 54-13 32-16 60-16 55-18 39-14 04-68 04-78 04-16 56-49 05-16 54-16 55-16 96-16 95-16 96-14 05-11 06-17 16-14 52-00 06-18 24-13 16-14
DESCRIPTION Guide Belt Mower Drive RH Strap Torque Lh Hydro Strap Torque Rh Hydro Spacer, Axle Washer 25/32 x 1-1/4 x 16 Gauge E-Ring Key, Square Washer 25/32 x 1-5/8 x 16 Gauge Shaft Asm. Cross Hydro Spring Torsion T/A Washer 17/32 x 3/4 x 16 Ga. Link Transaxle Console, Shift Control Asm Bypass Hydro Retainer Spring 1" Zinc/Cad Nut Hex Jam Toplock 1/2-20 unf Washer 9/32 x 3/4 x 10 Ga. Bolt 3/8-16 Unc x 1 Nut Lock 3/8-16 Unc Spacer Retainer Washer 13/32 x 2 x 10 Ga. Washer Srrtd 5/16 ID x 1.0 x.125 Tk Bracket Shift Mount Hub Tapered Flange Shift LT Bolt Rdhd Sqnk 1/4-20 x 3/4 Gr. 5 Nut Crownlock 1/4-20 Unc Bolt Hex Fin 1/4-20 unc x 1 Gr. 5 Bracket Pivot Lever Screw 5/16-18 x 5/8 Bolt Shoulder 5/16-18 x.561 TT Plate Fastening Nyliner Snap-In 5/8" ID Washer Nyl 7/8 ID x.105 HYD CRD Bolt Shoulder 5/16-18 unc Bolt Rdhd Sqnk 5/16-18 unc x 1 Bolt Carr Sh 3/8-16 x 1-3/4 Gr. 5 Washer 17/32 x 1 x 16 Ga. Nut Hexange Lock Screw Hex Wsh Thdr. 3/8-16 x 3 Guard Mufer RH Washer 13/32 x 1 x 14 Ga.
NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm

STEERING

steering_pl.lt_58

KEY NO. 95 97

PART NO. 67-17 51-16 98-16 98-12 49-12 17-27 20-00 00-12 49-17 51-04 06-13 65-14 52-19 07-12 68-13 14-00 06-02 04-19 27-04 05-15 50-15 29-19 29-11 38-54 06-18 67-16 96-12 17-19 07-12 12-18 32-16 03-11 06-16 98-17 51-19 99-17 51-17 55-18 89-78 05-64
DESCRIPTION Wheel Steering Axle Asm Fr Spindle Asm LH Spindle Asm RH Bearing Race Thrust Harden Washer 25/32 x 1-5/8 x 16 Ga. Washer 27/32 x 1-1/4 x 16 Ga. Ring Klip #t5304-75 Bearing Col Strg Blk Link Drag Washer Lock Hvy Hlcl Spr 3/8 Spacer Brace Axle Nut Hexange Lock Shaft Asm Strg Bushing Link Drag Blk LR Washer 13/32 x 7/8 x 16 Ga. Screw 3/8-16 x.75 Pin Cotter 1/8 x 3/4 Cad Rod Tie Wire Form Washer Lock Hvy HLCL Spr. 5/16 Bushing Strg Nat.623/.618Id Screw TT #10-32 x 5 x 3/8 Flange Cap Wheel Steer P/L Washer 11/32 ID x 2-3/8 OD x 12 Ga. Nut Crownlock 3/8-24 Adaptor Wheel Strg Boot Shaft Steering Washer 25/32 x 1 1/4 x 16 Ga. Extension Steering Cap Spindle Fr Top Blk Fitting Grease Spacer Brace Axle Bolt RDHD SQ 3/8-16 unc x 2-1/4 Brace Axle Steering Asm. Bracket Susp. Chassis Front Bolt Shoulder 7/16-20 Clip Steering Washer Harden.793 x 1.637 x 060 Bolt 5/16-18 UNC x 4" L Gr. 5

ENGINE

OPTIONAL EQUIPMENT Spark Arrester

engine-bs.1cyl_38

KEY NO. 78 81

PART NO.

DESCRIPTION
05-51 Control Throttle Flag Eec 04-08 Screw Hex Thd Cut 1/4-20 x 1/2 - - - - - - - - - Engine Briggs & Stratton 219807 (Order parts from engine manufacturer) 97-58 Mufer LT B&S 12/HP 52-91 Gasket Eng 84-56 Tube Drain Oil Easy 98-37 Shield Brn/Dbr Guard 06-95 Control Choke 71-80 Kit Spark Arrecter 77-50 Tank Fuel Front 1.19 77-25 Cap Asm Fuel 34-87 Clamp Hose Blk 70-40 Line Fuel 20" 16-54 Plug Drain Oil Easy 40-28 Bushing Snap Nyl Blk Fuel Line 04-12 Screw Hexwsh Thdrol 1/4-20 x 3/00 06-12 Screw Hexwsh Thdrol 3/8-16 x 3/09 14-16 Washer 9/32 x 7/8 x 16 Ga. 05-00 Washer Lock Hvy HLCL Spr. 5/19 23-34 Screw Socket HD 5/16-18 x.06 06-20 Screw 3/8-16 x 1-1/51 04-00 Nut Keps Hex 1/4-20 unc

17 seat_lt.bolt_1

KEY NO. PART NO. 10-14 05-11 06-13 16-14 50-80 06-12 41-00 06-13 16-19 55-19 27-12 12-48
KEY NO. PART NO. 04-13 43-12 12-12 39-17 18-80 05-11 08-17 19-12 70-04 08-00
DESCRIPTION Seat Bracket Pivot Bolt Fin Hex 3/8-16 unc x 1 Washer 13/32 x 1 x 10 Ga. Clip Push-In Nut Lock Hex w/Wsh 3/8-16 unc Spring Seat Cprsn Blk Zi Screw 3/8-16 x 1.5 Washer 13/32 x 1 x 14 Ga. Pan Seat Bracket Mounting Switch Bushing Snap Blk Nyl 50 Id
DESCRIPTION Bolt Rdhd Sht Nk 1/4-20 x 1-1/2 Spacer Split 28x 96 Yel Zinc Spring Cprsn Blk Pnt Nut Lock 1/4 Lge Flg Gr. 5 Zinc Bolt Shoulder 5/16-18 Unc -2A Nut Lock Hex W/Insert 5/16-18 unc Bolt Hex Black Washer 17/32 x 1-3/16 x 12 Ga. Bolt Shoulder 5/16-18 x 62 Washer Lock Hvy HLCLSPR 1/2
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm

DECALS

KEY NO. 10
63-57 Decal Deect Warning Cutnger sym. 50-05 Decal Bat Dan/Poi P/L Symbols 16-00 Decal Hood 47-65 Decal Engine 56-51 Decal Chas. Turbo Collection 08-37 Decal Saddle Brake Parking 22-12 Decal Fender 03-89 Decal Warning Sym CE 97-36 Decal Chassis Hot Mufer

KEY NO. -----KEY NO. 11

PART NO. 21-18 04-40 16-15 97-17 91-16 03-16 25-13 83-16 69-40 08-40 08-96 PART NO. 91-06 51-12 41-05 99-12 51-12 49-12 49-12 51-12 39-12 49-17 50-39
DESCRIPTION Decal Mower Cut nger Symbol Decal 100 Db/CE Decal Strg Wheel Cap Decal Brake/Clutch Decal Deck "B" Decal V-Belt Sch Decal Drawbar Load Limit Decal Lift Handle (Lift Handle) Decal Bypass Manual Operator's Euro Manual Operator's Scan

WHEELS & TIRES

5,8 4,3,11
DESCRIPTION Cap Valve Tire Stem Valve Tire F Ts 15 X - 6 Service Tube Front (Service Item Only) Rim Asm 6" front Yellow Service Fitting Grease (Front Wheel Only) Bearing Flange (Front Wheel Only) Rim Asm 8" rear Yellow Service Tire R Ts 18 x 8.5-8 C. Service Tube Rear (Service Item Only) Cap Axle Blk X 1 00

MOWER LIFT

lift-rh.1piece_3

KEY NO. 32

PART NO. 84-19 80-18 88-00 00-21 16-12 01-10 94-12 45-13 98-13 98-12 46-17 32-35 08-17 56-80 08-13 98-19 42-16 98-54 06-00
DESCRIPTION Wire Asm Inner W/Plunger Shaft Asm Lift Pin Groove E Ring #5133-62 Washer PLTD 21/32 x 1 x 21Ga. Bearing Nylon Blk 629 Id Grip Handle Bicycle Matte Blk Button Plunger Black Link Lift LH Link Lift RH Retainer Spring Link Front Nut Jam Hex 1/2-13 unc Trunnion Nut Lock w/wsh 1/2-13 unc Arm Suspension Rear Pin Cotter 7/16 Bow Tie Lock Bearing Pvt Lift Nut Crownlock 3/8-24

MOWER DECK

143 144

42 _c lu tc h_

45 150

42_deck_man-t-path_3

KEY NO. 44
PART NO. 58-14 05-13 80-16 54-12 46-17 80-85 08-03 06-14 02-13 89-13 76-12 87-11 04-17 44-14 05-13 28-15 97-68 05-17 75-10 53-12 37-11 04-17 18-11 10-13 14-17 39-18 76-15 35-40 02-11 06-13 14-90 06-14 00-88
DESCRIPTION Housing Asm Mower 42" T-Path Bolt Rdhd Sqnk 5/16-18unc x3/4 Bracket Asm Fr Sway Bar 38/42 Bracket Asm Deck 42" sway Bar Retainer Spring Bar Sway Deck Bolt 3/8 - 24 x 1.25 Gr. 8 Washer Lock Hvy 3/8 Unplated Washer Hard Blade Mower Blade Mower Shaft Asm W/Lower Bearing Housing Mandrel Vented (Machd) Bearing Ball Mandrel Stripper Round Mower Bolt Carr 5/16-18 x 5/8 Bolt Shoulder Bafe Vortex 42" Nut Crown Lock 5/16-18 Bracket Deector Mower 42" Cap Sleeve 80 x 112 Blk Mower Spring Torsion Deector Nut Push Phos & Oil Shield Deector Mower 42" Washer 11/32 x 5/8 x 16 Ga. Rod Hinge 42" Wlg Screw Thdrol Washer Spacer Pulley Mandrel 42/44/50 Nut Top Lock Flng Bolt Carr. Sh 3/8-16 x 1-1/2 Gr. 5 Pulley Idler Flat Nut Lock Flg 3/8-16 unc Guard Mandrel LH Black

KEY NO. 185 ---

PART NO. 47-13 77-13 39-13 98-18 49-17 85-15 50-16 57-14 10-10 69-18 02-16 58-15 71-15 86-16 58-17 19-17 97-16 90-16 58-09 12-18 15-72 04-14 06-13 14-18 82-18 19-13 07-94

DESCRIPTION Spring Retainer 1" Zinc/cad Screw Hex Thd Cut 1/4-20x5/8 T Washer Hardened Smaller Bolt Shoulder 5/16-18 Unc Blkz Arm Asm Pad Brake Washer Hardened Arm Idler 42" mower LT/YT Spacer Retainer Pm Mower Guard TUV Idler Knob Rd 3/8-16 Plstc Thds Blk V-Belt Mower Arm Spring Brake Mower Bracket Arm Idler 42" Keeper Belt 42" Clutch Cable Pulley Idler Flat Bolt Carriage Idler Spring Extension Spring Return Idler Retainer Spring Yellow Washer 9/32 x 3/4 x 10 Ga. Clutch Cable 42" Screw Hex Thd Cut 1/4-20 x 1/2 Bolt Rdhd Sqn 3/8-16 unc x 1-3/4 Washer 13/32 x 7/8 x 10 Ga. Head Asm. Cable Clutch Replacement Mower, Complete Mandrel Asm. (Includes Housing, Shaft and Shaft Hardware Only - Pulley Not Included)

SCHEMATIC

BATTERY

A AMMETER (OPTIONAL)

M STARTER

SOLENOID

CLUTCH / BRAKE (PEDAL UP)

IGNITION SWITCH

SEAT SWITCH (NOT OCCUPIED)

BLACK BLACK

HOUR METER (OPTIONAL)
ATT'MENT CLUTCH (CLUTCH OFF)
GROUNDING CONNECTOR SPARK PLUG GAP (2 PLUGS ON TWIN CYL. ENGINES)
28 VOLTS AC MIN. @ 3600 RPM (CHARGING SYSTEM DISCONNECTED)

FUEL LINE

IGNITION UNIT
CHARGING SYSTEM OUTPUT 3 AMP DC @ 3600 RPM RED LIGHTING SYSTEM OUTPUT 5 AMP AC @ 3600 RPM
FUEL SHUT-OFF SOLENOID (IF SO EQUIPPED)

ORANGE

ALTERNATOR
14 VOLTS AC MIN. @ 3600 RPM (LIGHTS OFF)
NOTE YOUR TRACTOR IS EQUIPPED WITH A SPECIAL ALTERNATOR SYSTEM. THE LIGHTS ARE NOT CONNECTED TO THE BATTERY, BUT HAVE THEIR OWN ELECTRICAL SOURCE. BECAUSE OF THIS, THE BRIGHTNESS OF THE LIGHTS WILL CHANGE WITH ENGINE SPEED. AT IDLE THE LIGHTS WILL DIM. AS THE ENGINE IS SPEEDED UP, THE LIGHTS WILL BECOME THEIR BRIGHTEST. IGNITION SWITCH
POSITION CIRCUIT MAKE NONE A2+L NONE NONE OFF M+G+A1 RUN/LIGHT B+A1 RUN START B+A1 B + S + A1

HEADLIGHTS

NON-REMOVABLE CONNECTIONS
WIRING INSULATED CLIPS NOTE: IF WIRING INSULATED CLIPS WERE REMOVED FOR SERVICING OF UNIT, THEY SHOULD BE REPLACED TO PROPERLY SECURE YOUR WIRING.

REMOVABLE CONNECTIONS