USB 2.0 Flash Drive User Manual

Page 1

Table of Contents

INDEX Page

A. USER MANUAL FOR PURE USB STORAGE FUNCTION.3 1. IMPORTANT NOTICE.... 3 2. PRODUCT INTRODUCTION... 3 3. PRODUCT FEATURES.... 4 4. DRIVER INSTALLATION GUIDE.... 5 4.1 In Windows 98 / 98 SE... 5 4.2 Windows 2000 / ME / XP.... 7 4.3 Mac OS 9.2 or above... 8

Page 2

A. User Manual for Pure USB Storage Function 1. Important Notice
To maximize the performance of USB 2.0 Flash Drive, make sure that the motherboard and the operating system support USB 2.0. Reminder: In Mac OS environment, USB 2.0 Flash Drive functions in USB 1.1 mode due to the OS and hardware limitations. In Windows 98 / 98 SE environment, follow the instructions in user manual to install the device driver FIRST. To remove USB 2.0 Flash Drive from your system, click on the icon Stop Mass Storage Device as shown below before unplugging USB 2.0 Flash Drive from the USB port. Incompletion of this procedure might cause Data Loss.

2. Product Introduction

This USB 2.0 Flash Drive incorporates the latest Hi-Speed USB 2.0 technology to reach the maximum read/write speeds. It is also backward compatible with existing USB 1.1 interface, brining users flexibility and ease of transferring data files between different platforms that are equipped with USB ports.

Page 3

3. Product Features
USB Interface Compliant with USB specification revision 2.0 Backward compatible with USB specification revision 1.1 A true plug & play connection supports hot swapping function Direct power support from USB port; no external power source or batteries required High-Speed Data Transferability Great enhancement in read/write speed System Support No driver required for Windows 2000 / ME / XP, Mac. OS 9.2 or above Support Windows 98 / 98 SE with device driver. LED Indicator LED indicates data transfer in progress

Page 4

4. Driver Installation Guide
Note: For Windows 98 / 98 SE users, please Re-start your computer after installing the driver. 4.1 In Windows 98 / 98 SE Place the Installation Tool CD into CD-ROM Click on Driver Follow the instruction of the pop-up window to install the driver

Page 5

Plug in the USB 2.0 Flash Drive after your computer reboots. The system will detect the Flash Drive automatically. A Removable Disk will appear in My Computer.

Page 6

4.2 Windows 2000 / ME / XP NO Driver is required for these operating systems. Simply plug USB 2.0 Flash Drive into the USB port. The system will detect the Flash Drive automatically. One Removable Disk will appear in My Computer.

Page 7

4.3 Mac OS 9.2 or above NO Driver is required for these operating systems. Simply plug USB 2.0 Flash Drive into the USB port. The system will detect the Flash Drive automatically. One Removable Disk will appear in My Computer.

Page 8

Hi-Speed USB 2.0 Flash Drive
User Manual for USB Disk Pro

Ver 1.00

Page 1

New Features

1. 2. Allows user to set own password. (maximum 16 characters) Allows user to enter Password Hint, in case user forgot about their password Automatically format the Protected part of the USB Disk Pro when enter wrong password 6 times. New Format function, allows user to define the capacity of the protected area.

IMPORTANT

System Support Windows 98SE/ME/2000/XP Please download Windows 98SE driver from www.canyon-tech.com 1. When using USB Disk Pro with the security application program, only ONE USB Disk Pro is allowed at once. DO NOT PLUG IN TWO OR MORE USB DISK PRO AT THE SAME TIME.

Page 2

Main Screen
A B C D E F G Set up / Change password Disable / Remove password Unlock Device Password Status tells you whether a password has been set up or not Device Status tells you whether the device is locked or unlocked Forgot Password ? dont worry, let password hint remind you Configure Size allow user to set the capacity of the protected area

Page 3

1. Setup Password
(1) Press Set Password to setup password, and you will see the following screen
(2) Enter a password of your choice. (maximum 16 characters long) (3) Confirm password by re-enter the password you set in (2). (4) Enter a password hint of your own, in case you forget your password. You can enter anything you want within 31 characters.
PS : Tick Show Password box to see what you are typing or what you have entered (5) Press Apply to confirm changes. You will see the following message window pop up. This message window tells you that the device will be automatically locked after you remove the device from USB port.

Page 4

(6) Once you have set up the password correctly, you will notice the change in Password Status.
When you remove the device from USB port and re-insert it again, the device will automatically be locked. If you try to access it, it will reply with some error message. (depending on the operating system, the error message will be different)
If you execute the Security AP, you will see that the device is LOCKED.

Page 5

2. Change Password (1) If you have already setup a password before, you can change the password you set. Click Change Password to change.

(2) (3) (4) (5)

Enter your old password Enter new password of your choice Confirm the new password by re-enter Change password hint if you wish. PS : (i) Password Hint does not have to be entered/changed. If you dont want to change it, you can use the old hint. (ii) Password Hint can only be edited with new password. ie : Password Hint can not be edit/change without change of password.
(iii) Use Show Password to see what you have typed.

Page 6

3. Disable / Remove Password
(1) If you no longer want to use the password, select Disable Password to remove it.

(2) Enter your password.

You only have SIX chances to enter password correctly. If you enter wrong password six times, it will automatically FORMAT the protected area of your SecurePenDrive. (All data will be lost)

Page 7

4. Unlock Device
(1) If you have setup a password, you must Unlock first. (enter password) before you access the data on the protected area, Select Unlock to enter password.

Page 8

5. Password Hint
When you setup/change your password, you can also edit a Reminder of your choice, in case you forget your password. (1) Enter a hint of your choice. (maximum 31 characters long) Setup Password Change Password
(2) Press Password Hint any time to get your reminder.

Page 9

6. Format
(1) Press Configure Size to adjust the capacities of the PenDrive.
(2) A warning message will show, telling user that whether you want to proceed with formatting, any data on the PenDrive will be lose.
(3) Drag the bar to adjust the capacity of the Protected area. eg: In this case, the protected area is a bit over 442MB and the unprotected area will be what ever is left. (as shown below)

Protected Area

Unprotected Area

Page 10

Disclaimer
All the information in this document is subject to change without prior notice. The manufacturer makes no representations or any warranties regarding the contents of this manual. The information contained in this manual is provided for the general use by the customers. No part of this user manual may be transmitted, reproduced, or changed In any form by any means without the express written permission of the manufacturer. Al brand names and product names used in this document are trademarks or registered trademark of their respective holders. If you have any questions, please contact your merchant or our service center for clarification. Read the contents of this manual before operating the product. We are not responsible for any losses resulting from using this product no matter what the reason. Please keep your password in a safe place. If you lose the password, we are not responsible of any lost data.

Page 11