Pentax Optio 43WR
Part Number: SD-2GB-6481
Here you can find all about Pentax Optio 43WR, for example manual and digital camera. You can also write a review. [ Report abuse or wrong photo | Share your Pentax Optio 43WR photo ]
Pentax Optio 43WR Digital Camera, size: 1.7 MB
Pentax Optio 43WR Operating Manual
Pentax Optio 43WR Pc Connection Manual
Pentax Optio 43WR Pc Connection
Pentax Optio 43WR Connection Manual
Pentax Optio 43WR
User reviews and opinions
|stumcd||7:44am on Sunday, October 3rd, 2010|
|Love this camera i took it to Australia and took video and great pictures in the midde of the great barrier reef its awesome. Love this camera i took it to Australia and t... Almost indestructible, Good Spy Camara Has An Ok Battery I love this camera. I use it for work and fun... Rugged, field usage friendly, and easy to use.|
|Dexter936||4:01pm on Wednesday, May 19th, 2010|
|Bought this camera one year ago. More than 2000 pictures. Overall satisfied with it. Easy to carry, and easy to use, good pictures at daylight.|
|jgeer||10:12am on Wednesday, April 28th, 2010|
|Great for the outdoors I decided to buy one of these after a sea kayaking trip on the west coast of Lewis and around St Kilda. Great for the outdoors I decided to buy one of these after a sea kayaking trip on the west coast of Lewis and around St Kilda. Pentax Optio 43wr Digital Camera This camera is the only genuinely submersible digital around.|
|brigadon||9:11pm on Wednesday, April 21st, 2010|
|Pentax Optio 43wr Digital Camera This camera is the only genuinely submersible digital around.|
|ninthweb||4:26pm on Saturday, April 10th, 2010|
|Overall this is great little camera. I have had the camera for about eight months and under most conditions it takes very good pictures.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
00_Optio43WR-E.book Page 1 Wednesday, February 25, 2004 1:23 PM
To ensure the best performance from your camera, please read the Operating Manual before using the camera.
00_Optio43WR-E.book Page 2 Wednesday, February 25, 2004 1:23 PM
Thank you for buying the PENTAX Optio 43WR Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the cameras capabilities.
Regarding copyrights Images taken using the Optio 43WR that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are even cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, industrial enterprise or as items for display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. Regarding trademarks SD logo is a trademark. PENTAX is a trademark of PENTAX Corporation. Optio is a trademark of PENTAX Corporation. All other brands or product names are trademarks of registered trademarks of their respective companies. This product supports PRINT Image Matching II. When used in combination, PRINT Image Matching II enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Copyright 2001 Seiko Epson Corporation. All Rights Reserved. PRINT Image Matching is a trademark of Seiko Epson Corporation. To users of this camera There is a possibility that recorded data may be erased or that the camera may not function correctly when used in surroundings such as installations generating strong electromagnetic radiation or magnetic fields. The liquid crystal panel used in the LCD display is manufactured using extremely high precision technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image. There is a possibility that the illustrations and the display screen of the LCD monitor in this manual are different from the actual product. PictBridge PictBridge is a printer industry standard for directly connecting printers and digital cameras for the purpose of printing images. PictBridge provides simple operations that make it possible to print images directly from a camera without using a personal computer.
FOR YOUR SAFETY
We have paid close attention to the safety of this product. When using this product, we request your special attention regarding items marked with the following symbols. Warning Caution This symbol indicates that violating this item could cause serious personal injury. This symbol indicates that violating this item could cause minor or medium personal injury, or material loss.
Warning Do not disassemble or modify the camera. High voltage areas are present inside the camera, with the risk of electric shock. If the camera interior is exposed due to dropping or otherwise damaging the camera, never touch the exposed portion. There is the risk of electric shock. Wrapping the strap around your neck is dangerous. Take care that small children do not hang the strap over their necks. To avoid the risk of it being swallowed by mistake, keep the SD Memory Card out of the reach of small children. Seek medical attention immediately if accidentally swallowed. Always use the AC adapter specified exclusively for this product, with the specified power and voltage. Using an AC adapter not exclusive to this product, or using the exclusive AC adapter with an unspecified power or voltage can cause a fire, electric shock, or camera breakdown. If any irregularities occur during use, such as smoke or a strange odor, stop use immediately, remove the batteries or the AC adapter, and contact your nearest PENTAX service center. Continued use could cause a fire or electric shock. During thunderstorms, unplug and discontinue use of the AC adapter. Continued use could cause equipment failure, a fire, or electric shock. Caution Do not short the battery or dispose of the battery in fire. Do not disassemble the battery. The battery could explode or catch fire. Do not charge any batteries other than rechargeable Ni-MH batteries. The battery could explode or catch fire. Of the batteries that can be used in this camera, only the Ni-MH battery can be recharged. Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal. Some portions of the camera heat up during use. There is the risk of low temperature burns when holding such portions for long periods. Do not place your finger on the flash when it is discharging as there is a risk of burns. Do not discharge the flash when it is in direct contact with clothing or other objects. Firing the flash may result in discoloration of such objects. 1
Handling the Camera
When traveling abroad, be sure to take you international warranty card with you. You may also wish to take along the document Worldwide Service Network included with the product. This document is useful for making inquiries from your travel destination. Always confirm that the camera is working properly when the camera has not been used for a long time, or before important occasions (weddings, trips, etc.). PENTAX is not responsible for consequential damages (costs incurred for photography, lost profits, etc.) arising from failure of this product. The lens on this camera is not exchangeable. The lens is not removable. Do not clean the product with organic solvents such as thinner, alcohol, or benzene. Do not subject to high temperatures or high humidity. Do not leave the camera in a vehicle, as the temperature can get very high. Do not store the camera with preservatives and chemicals. Storage in high temperatures and high humidity can cause molding. Remove from case and store in a dry and well-ventilated location. Do not subject the camera to strong vibrations, shocks, or pressure. Use a cushion to protect the camera from vibrations of motorcycles, automobiles, or ships. The temperature range for camera use is 0C to 40C. The LCD display may appear black under high temperatures, but will return to normal as temperatures normalize. The LCD display may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a fault. Periodic inspections are recommended every one to two years to maintain high performance. Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, retrieving the camera after decreasing the temperature difference. Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. These could cause a camera breakdown. Wipe dry any rain or water drops on the camera. See Precautions when using an SD Memory Card (p.19) for details on the SD Memory Card. Please do not press forcefully on the LCD monitor. This could cause breakage or malfunction.
00_Optio43WR-E.book Page 3 Wednesday, February 25, 2004 1:23 PM
Operating Manual (this manual)
Operating Manual (PC Connection Manual)
(*) Items marked with an asterisk are also available as optional accessories. For other optional accessories, see Optional Accessories (p.118).
00_Optio43WR-E.book Page 10 Wednesday, February 25, 2004 1:23 PM
Names of Parts
Shutter release button Power switch Strap lug Microphone Lens Flash Self-timer lamp Water-resistant packing Battery/card cover
Speaker Status lamp (green) Terminal cover Flash status lamp (red) Viewfinder DC input terminal USB/AV output terminal Water-resistant packing
00_Optio43WR-E.book Page 11 Wednesday, February 25, 2004 1:23 PM
Names of Operating Parts
Zoom/f/y button Playback Q button OK button Four-way controller (2345) MENU button )/i button b/Z button O button
Guide display A button operation guide is displayed on the LCD monitor during operation. The buttons are indicated as shown below.
Four-way controller (2) Four-way controller (3) Four-way controller (4) Four-way controller (5) MENU button Shutter release button Zoom/f/y button (Digital zoom and magnified playback only) i button Z button OK button y
00_Optio43WR-E.book Page 12 Wednesday, February 25, 2004 1:23 PM
Attaching the Strap
1 Getting Started Pass the narrow end of the strap through the strap lug, and attach as shown.
00_Optio43WR-E.book Page 13 Wednesday, February 25, 2004 1:23 PM
Powering the Camera
1 Getting Started
(Using AA batteries)
Installing the Batteries
Install batteries in the camera. Use one CR-V3, or use two AA Ni-MH batteries, or AA alkaline batteries. Turn off the camera when setting batteries. Wipe away water or dirt from the camera with a dry cloth before setting batteries. Do not set batteries with wet or dirty hands.
Slide the battery cover in the direction of the arrow, and flip open. Insert the batteries according to the +- indicator in the battery chamber. Close the battery cover and push horizontally to lock.
When using for a prolonged period, please use the AC adapter D-AC5 (p.15). AA alkaline battery, and the CR-V3 battery are not rechargeable. Do not open the battery cover or remove the batteries when the power switch is on. When you will not use the camera for a long while, remove the batteries. Otherwise, the battery may leak. If the date and time settings have been reset when you insert new batteries after a long while, follow the procedure for Setting the Date and Time (p.24). Insert batteries correctly. Wrong insertion can cause a camera breakdown. 13
00_Optio43WR-E.book Page 14 Wednesday, February 25, 2004 1:23 PM
Number of Captures and Playback Time (25C, new batteries) 1 Getting Started
Taking pictures (50% flash usage) Image Storage Capacity CR-V3 Ni-MH batteries AA alkaline batteries Approx. 500 Approx. 300 Approx. 100 Playback Playback time CR-V3 Ni-MH batteries AA alkaline batteries Approx. 360 min. Approx. 230 min. Approx. 140 min.
These figures are based on PENTAX measuring conditions. They may vary by Capture mode or shooting conditions. Battery performance temporarily decreases as the temperature decreases. When using the camera in cold climates, have extra batteries on hand, keeping them warm in your pocket. Battery performance will return to normal when returned to room temperature. Owing to the characteristics of AA alkaline batteries, the camera may not deliver optimal performance at low temperatures when powered by alkaline batteries. We recommend the use of other batteries such as CR-V3 batteries when using the camera in conditions of low ambient temperature. When traveling overseas, taking pictures in cold climates, or when you will be taking a lot of pictures, please have extra batteries ready. You can extend battery life by switching off the LCD monitor and shooting using the viewfinder.
Battery Level Indicator You can check the battery level with the * display on the LCD monitor.
* , ; %
(lit green) (lit green) (lit yellow) : Adequate power remains. : Battery is running low. : Battery is running very low. : Battery is exhausted. : After displaying this message, the camera turns off.
(lit red) No battery power
00_Optio43WR-E.book Page 15 Wednesday, February 25, 2004 1:23 PM
Using the AC Adapter
When using the LCD monitor for a long time or when connecting to your PC, we recommend using the AC adapter D-AC5 (sold separately).
Make sure the camera is turned off before opening the terminal cover. Connect the DC terminal on the AC adapter to the DC input terminal on the camera. Connect the AC plug cord to the AC adapter. Plug the AC plug cord into the power outlet.
Make sure the camera is turned off before connecting or disconnecting the AC adapter. Make sure connections are secure between the camera, AC adapter, AC plug cord terminal, and the power outlet. Disconnections while the camera is recording or reading data will corrupt your data. When using the AC adapter, be sure to read the AC adapter D-AC5 operating manual. Connecting the AC adapter will not charge the rechargeable batteries in your camera.
00_Optio43WR-E.book Page 16 Wednesday, February 25, 2004 1:23 PM
Installing / Removing the SD Memory Card
SD Memory Card
The image or recorded sound is recorded on the SD Memory Card. Be sure the camera is turned off before inserting or removing the SD Memory Card. Turn off the camera before setting or removing the card. Wipe away water or dirt from the camera with a dry cloth before setting or removing the card. Do not set or remove the card with wet or dirty hands.
2 Quick Start
This is the simplest way to take still pictures. The flash discharges automatically based on light conditions by the default setting.
The camera will turn on.
Confirm the subject and shooting information on the LCD monitor.
The focus frame at the center of the LCD screen indicates the zone of automatic focusing. Press the Zoom button to change 4/10/2004 11:20 the size of the subject. Focus frame x Subject becomes bigger. w Subject becomes smaller. You can check the size of the subject by looking through the viewfinder.
Lightly Press (Halfway) the Shutter Release Button.
When the subject is in focus, the LCD monitors focus frame turns green.
Press the shutter release button down fully.
The image will be displayed on the LCD monitor for 1.5 seconds (Instant Review) and recorded on the SD Memory Card. (The green and red lamps next to the viewfinder blink alternately while the image is being recorded on the SD Memory Card.)
00_Optio43WR-E.book Page 27 Wednesday, February 25, 2004 1:23 PM
Pressing the Shutter Release Button The shutter release button works in two steps.
Lightly press (halfway) the shutter release button to lock the focus position, exposure, and white balance. The shutter speed and aperture settings are only displayed when pressing the shutter release button halfway. You can find the following information on the LCD monitor, the AF status lamp and the flash status lamp.
1. Focus frame
The frame lights green when focused. It is not displayed when out of focus.
2. Focus status lamp & Flash status lamp
Lit Blink AF status lamp (green) Subject is in focus. Subject is out of focus. Flash status lamp (red) Flash is ready. Now charging.
You cannot take a picture while the flash is charging.
Press down fully
Press the shutter release button all the way down (fully) to take a picture.
Poor focusing conditions
The camera may not focus if the subject is in a condition shown below. Lock the focus on something that is the same distance away as the subject (press the shutter release button halfway), and press the shutter release button fully when you have composed your picture. Things that lack contrast such as a blue sky or white wall. Dark places or objects, and conditions that prevent light being reflected back. Horizontal lines or intricate patterns Fast moving objects When an object in the foreground and one in the background are in the same picture. Strongly reflected light or strong backlighting (bright background)
Select [K] (Manual) on the White Balance selection screen. Point your camera at white paper to fill the screen. Press the OK button.
[Adjusting] is displayed on the LCD monitor. After white balance has been automatically adjusted, [Complete] is displayed and the camera returns to the Menu screen.
00_Optio43WR-E.book Page 44 Wednesday, February 25, 2004 1:23 PM
Setting the Focusing Area
You can change the area for autofocus (Focusing Area).
Multiple Spot Normal range The autofocus range becomes smaller.
Select [Focusing Area] on the [A Rec. Mode] menu. Press the four-way controller (45) to change the focusing area. Press the OK button.
The focus frame lights green when focused by pressing the shutter release button halfway if Multiple is selected.
00_Optio43WR-E.book Page 45 Wednesday, February 25, 2004 1:23 PM
Setting the Light Metering Range
You can choose the part of the screen to use for measuring brightness and determining exposure.
L M N Detailed measurement of entire screen to determine exposure. Measures mainly the center of the screen to determine Center-weighted exposure. Measures only the very center of the screen to Spot determine exposure. Multi-segment
Select [AE Metering] on the [A Rec. Mode] menu. Press the four-way controller (45) to change the Metering mode. Press the OK button.
Saving the AE Metering Method 1p.68
00_Optio43WR-E.book Page 46 Wednesday, February 25, 2004 1:23 PM
You can set the Sensitivity to match the brightness of the surroundings.
Auto The camera makes the adjustment automatically. The lower the Sensitivity (smaller number), the smaller the noise and sharper the image. The shutter speed will be slower in low light conditions. The higher the Sensitivity (larger number), the faster the shutter speed in low light conditions. The image will have more noise.
Select [Sensitivity] on the [A Rec. Mode] menu. Press the four-way controller (45) to change the sensitivity. Press the OK button.
Rec. Mode Sensitivity Digital Zoom Interval Shoot Movie Memory Auto On
The only available AUTO settings are 50, 100, and 200.
Saving the Sensitivity 1p.68
00_Optio43WR-E.book Page 47 Wednesday, February 25, 2004 1:23 PM
You can make the image outlines sharp or soft.
Select [Sharpness] on the [A Rec. Mode] menu. Press the four-way controller (45) to select x (Normal), z (Hard), or y (Soft). Press the OK button.
Rec. Mode Sharpness Saturation Contrast
00_Optio43WR-E.book Page 48 Wednesday, February 25, 2004 1:23 PM
Setting Color Saturation
This sets the color saturation.
Select [Saturation] on the [A Rec. Mode] menu. Press the four-way controller (45) to select x (Normal), z (High), or y (Low). Press the OK button.
00_Optio43WR-E.book Page 49 Wednesday, February 25, 2004 1:23 PM
Setting the Image Contrast
You can set the image contrast level.
Select [Contrast] on the [A Rec. Mode] menu. Press the four-way controller (45) to select x (Normal), z (High), or y (Low). Press the OK button.
00_Optio43WR-E.book Page 50 Wednesday, February 25, 2004 1:23 PM
Shutter release button
Four-way controller OK button
In Program mode (e), you can set all the functions and take pictures.
Press the four-way controller (45) to select [e]. Press the OK button.
Set the functions you want to use.
See Setting the Capture Functions (p.36p.49) for instructions.
The picture is taken.
Taking Still Pictures 1p.26
00_Optio43WR-E.book Page 51 Wednesday, February 25, 2004 1:23 PM
You can match your settings to the situation. Picture Mode There are nine modes available.
H / & J M N I. : Landscape Night-Scene Mode Night-Scene Portrait Portrait Surf Snow Flower Fireworks Snap Mode Enhances your landscape photos. Enables you to take dark scenes such as night views. Enables you to take portraits in dark conditions. Enhances your portrait photos. Enhances photos taken against bright backgrounds such as sandy beaches. Enhances photos taken against highly reflective backgrounds such as snowy mountain slopes. Enhances your flower photos. Enhances your fireworks photos. Enhances your snap photos.
00_Optio43WR-E.book Page 52 Wednesday, February 25, 2004 1:23 PM
Press the four-way controller (45) to select your desired Picture mode.
For example, select Landscape.
The Picture mode is selected.
In Picture mode, the EV compensation, saturation, contrast, sharpness, and white balance are automatically set to the optimum values for each mode. (You can change the settings.) To avoid camera movement in Night-scene, Night-scene Portrait, or Fireworks mode, you are recommended to fix the camera on a tripod.
00_Optio43WR-E.book Page 53 Wednesday, February 25, 2004 1:23 PM
Taking Panorama Pictures (Panorama Assist Mode)
Using the software provided with the camera (ACDSee for PENTAX, ACD PhotoStitcher), you can easily join several images together to create a panorama photograph. Joining captured photographs so that the images overlap end to end in Panorama Assist mode results in a single panorama photograph. 4 Taking Pictures
Press the four-way controller (3) to select [Frame Rate]. Press the four-way controller (45) to change frame rates. Press the OK button 2 times.
Use the high speed type (10 MB/S) SD memory card when taking moving pictures after selecting 640 x 480 pixels of p.64 and 30 fps frame rate. If the normal type (2 MB/S) card is used, the taking moving picture will stop halfway.
00_Optio43WR-E.book Page 67 Wednesday, February 25, 2004 1:23 PM
Taking Fast Forward Moving Pictures (Fast Fwd Movie)
This mode lets you take moving pictures at a delayed frame rate so that when you play the movie back, the action appears speeded up. 4 Taking Pictures
Press the four-way controller (3) to select [Fast Fwd Movie]. Press the four-way controller (45) to select [Off (x1)], [x2], [x5], [x10], [x20], [x50], or [x100]. Press the OK button 2 times.
Taking Moving Pictures 1p.62 Off (x1) is the normal moving picture setting (15 frames per second). When x2 or x5 is selected, the number of frames recorded per second decreases by 1/2 or 1/5, respectively. As moving pictures are normally played back at the rate of 15 frames per second, movies taken at x2 are played back twice as fast and movies taken at x5 are played back five times as fast. Sound cannot be recorded. 67
00_Optio43WR-E.book Page 68 Wednesday, February 25, 2004 1:23 PM
Saving the Settings
Saving the Menu Items (Memory)
You can choose whether to save the set values when the camera is turned off. If you select On, the camera saves the settings in effect just before the camera is turned off. If you select Off, the settings return to default settings when the camera is turned off.
Item Flash Description Saves the Flash mode setting selected with the button. Saves the White Balance settings on the Rec. mode menu. Saves the EV compensation settings. Saves the Digital Zoom settings on the Rec. mode menu. Saves the AE Metering settings on the Rec. mode menu. Saves the Sensitivity settings on the Rec. mode menu. Saves the Focus mode settings. Saves the Zoom Position settings. The focus position set by Manual Focus is saved. Saves the file numbers. File numbers will continue to have sequential numbers even after changing the SD Memory Card. Default Setting O P P O P P P P P O
White Balance EV compensation Digital Zoom AE Metering Sensitivity Focus Mode Zoom Position MF Position File No.
The following operations can be performed during playback. Four-way controller (4) Rewinds and plays back the recorded sound. Four-way controller (5) Advances and plays back the recorded sound. Zoom/f/y button (x) Increases the volume. Zoom/f/y button (w) Decreases the volume.
Playback will stop.
Press the Playback button.
The camera will return to the Capture mode.
00_Optio43WR-E.book Page 72 Wednesday, February 25, 2004 1:23 PM
Adding a Voice Memo
You can add a voice memo to a recorded image.
Enter the Playback mode and choose the image to which you want to add a voice memo with the four-way controller (45).
If the image has no voice memo, the start mark for recording a voice memo is displayed on the LCD monitor.
Press the O button.
Recording starts. When recording, the recording time remaining is displayed on the LCD monitor.
Set Msg 100-0001
The recorded voice memo will be played back.
A voice memo cannot be added to protected (Z) images. Images with a voice memo are indicated with U on the LCD monitor. The recorded sound can be set to Start-up, Shutter, Operation and Self-timer sound. (1p.99)
00_Optio43WR-E.book Page 73 Wednesday, February 25, 2004 1:23 PM
Recording a Voice Message
You can leave voice messages made up of images or sounds with added voice memos. The O button flashes during voice message saving to indicate that a voice message has been left. Setting Voice Messages in Playback Mode
Enter Playback mode and use the four-way controller (45) to select the image to be used for the voice message from the images with voice memos added.
U is displayed on images with voice memos added.
Set to message? is displayed.
Using the four-way controller (2), select [Set]. Press the OK button.
A voice message has been set is displayed, the O button flashes, and the camera goes into Standby mode.
Delete saved images or sounds one by one.
Deleted images or sounds cannot be recovered. Protected images or sounds cannot be deleted.
Enter the Playback mode and choose the image/sound you want to delete with the four-way controller (45). Press the i button.
The Delete screen will be displayed.
Select [Delete] with the four-way controller (2). Press the OK button.
You can also delete images during Instant Review (p.27). Setting the Quick Delete option on the Set-up Menu to On makes it possible to omit Step 3 above.
00_Optio43WR-E.book Page 80 Wednesday, February 25, 2004 1:23 PM
Deleting a Voice Memo If an image has a voice memo (indicated with U), you can delete the voice memo without deleting the image.
Enter the Playback mode and choose the image with the voice memo that you want to delete with the fourway controller (45). Press the i button.
The Sound Delete screen will be displayed.
Select [Sound Delete] with the fourway controller (2). Press the OK button.
Sound Delete Delete Cancel
Select [Delete] in step 3 above to delete both the image and the voice memo. Setting the Quick Delete option on the Set-up Menu to On makes it possible to omit Step 3 above.
00_Optio43WR-E.book Page 81 Wednesday, February 25, 2004 1:23 PM
Deleting All Data
You can delete all the images/sounds at once.
Once deleted, images/sounds cannot be restored. You cannot delete protected images/sounds.
Enter the Playback mode and press the i button twice.
The Delete All Images/Sound screen will be displayed.
100-0001 Delete all images & sounds on the memory card? Delete All Cancel
Select [Delete All] with the four-way controller (2). Press the OK button.
Setting the Quick Delete option on the Set-up Menu to On makes it possible to omit Step 2 above.
00_Optio43WR-E.book Page 82 Wednesday, February 25, 2004 1:23 PM
Protecting Images from Deletion (Protect)
You can protect images/sounds from being accidentally deleted.
Enter the Playback mode and choose the image or sound you want to protect with the four-way controller (45). Press the Z button. 100-0001
The Protect screen will be displayed.
Select [Protect] with the four-way controller (2). Press the OK button.
Turn the camera off. Disconnect the USB cable from the camera. Disconnect the USB cable from the printer.
Pressing the MENU button when the Continue printing? message is displayed causes the Safely remove USB cable to be displayed. When the USB cable is disconnected from the camera while the camera is turned on, the camera automatically switches to the Capture mode.
00_Optio43WR-E.book Page 92 Wednesday, February 25, 2004 1:23 PM
Changing the Image Size
By changing the size and quality of a selected image, you can make the file smaller than the original. After changing the size, the image can be saved as a new image or written over the original image.
The [Q Playback] menu will be displayed.
Press the four-way controller (23) to select [Resize]. Press the four-way controller (5).
The Resize screen will be displayed.
Use the four-way controller (45) to select the image you want to resize. Press the OK button.
100-0001 Select resolution and quality Recorded Pixels Quality Level 320 240
00_Optio43WR-E.book Page 93 Wednesday, February 25, 2004 1:23 PM
Select [Recorded Pixels] with the four-way controller (45). Press the four-way controller (3).
The frame will move to [Quality Level].
Press the four-way controller (45) to select [Quality Level]. Press the OK button. Press the four-way controller (23) to select [Overwrite] or [Save as]. Press the OK button.
The image will be resized.
Moving pictures cannot be resized. You cannot select a larger size than that of the original image. You cannot select a higher quality than that of the original image.
00_Optio43WR-E.book Page 94 Wednesday, February 25, 2004 1:23 PM
You can trim part of a picture and save it as a separate image.
Press the four-way controller (23) to select [Trimming]. Press the four-way controller (5).
The image that can be trimmed will be displayed.
Use the four-way controller (45) to select the image you want to trim. Press the OK button.
The trimming screen will be displayed.
Trim the image.
Operations available on the Trimming OK MENU Size Rotete Exit Rotate OK screen. Zoom/f/y button: Changes the size of the image. Rotates the trimming frame b button: Four-way controller (2345): Moves the trimming position up or down and left or right. MENU button: Returns to the screen for selecting the image to be trimmed.
Press the OK button. Use the four-way controller (45) to select the quality level after trimming. Press the OK button.
The trimmed image will be saved as a separate image.
100-0001 Select image quality Quality Level
Moving pictures cannot be trimmed. You cannot select a higher quality than that of the original image.
00_Optio43WR-E.book Page 95 Wednesday, February 25, 2004 1:23 PM
Editing Images with Digital Filters
The filters consist of color filters such as red, blue, and green, a soft filter that produces a fuzzy effect, and a brightness filter that adjusts the brightness of the image. In Digital Filter mode, these filters can be used to edit an image. Color Filters (%) Eight colors, black-and-white, sepia, red, pink, violet, blue, green and yellow, are provided for the color filters. When you select a color filter in the Digital Filter mode, the display on the LCD monitor is filtered with the selected color, and the images are saved in that color. Soft Filter ($) Images edited with the soft filter can be given a fuzzy effect and saved. Brightness Filter (&) Images edited with the brightness filter can be brightened or darkened and saved.
00_Optio43WR-E.book Page 96 Wednesday, February 25, 2004 1:23 PM
Press the MENU button in Playback mode. Press the four-way controller (23) to select [Digital Filter]. Press the four-way controller (5).
The digital filter setup screen will be displayed.
Use the four-way controller (45) to select the image you want to edit. Press the four-way controller (23) to select the desired digital filter.
The filtered image will be displayed on the LCD monitor.
Operations available with the brightness filter [&] Zoom/f/y button (x) Makes image brighter. Zoom/f/y button (w) Makes the image darker.
Press the OK button. Press the four-way controller (23) to select [Overwrite] or [Save as]. Press the OK button.
The image edited with the digital filters will be saved.
00_Optio43WR-E.book Page 97 Wednesday, February 25, 2004 1:23 PM
How to recall the [B Set-up] menu
Formatting an SD Memory Card
Formatting will delete all the data on the SD Memory Card.
Do not open the card cover while the SD Memory Card is being formatted. The card may be damaged and become unusable. SD Memory Cards formatted on a PC or device other than the camera cannot be used. Be sure to format the card with the camera. Please note that formatting will delete protected images as well.
Select [Format] on the [B Set-up] menu. Press the four-way controller (5).
The format screen is displayed.
Cause Subject is difficult for Autofocus to handle.
00_Optio43WR-E.book Page 116 Wednesday, February 25, 2004 1:23 PM
Model Effective Pixels Sensor Recorded Pixels
Fully-automatic compact weather-resistant (JIS class 5) digital still camera with housed zoom lens 4 megapixels 4.23 megapixels (total pixels), 1/2.7 inch interline transfer CCD with a primary color filter Still Moving picture 2288x1712 pixels, 1600x1200 pixels, 1024x768 pixels, 640x480 pixels 640x480 pixels, 320x240 pixels, 160x120 pixels
Sensitivity File Format
Auto, Manual (Equivalent to ISO50, ISO100, ISO200, and ISO400) Still Moving picture JPEG (Exif2.2), DCF, DPOF, PRINT Image Matching II MOV (QuickTime Motion JPEG), about 15 fps, 30 fps, sound added, possible to switch between full color, sepia, and black and white, includes sound
Quality Level Storage Medium
Best, Better, Good SD Memory Card
Image Storage Capacity Still picture Quality Level Recorded Pixels Moving picture Frame rate Recorded Pixels 160120 White Balance Lens 30 frames/sec. 10 sec. 20 sec. 80 sec. 15 frames/sec. 25 sec. 40 sec. 150 sec. Best Better Good Voice recording
Exposure capacity when using a 16MB SD Memory Card. Auto, Daylight, Shade, Tungsten Light, Fluorescent light, Manual Focal Length Max. aperture Lens Composition Zoom Type Capture Range 5.7mm - 16mm (Equivalent to 37 - 104mm in 35mm format) f/2.8 - f/3.elements in 5 groups (one lens aspherical on both sides) Electrically driven 16.8mm 12.4mm (full screen) (Using macro mode or manual focus at max. WIDE position) Max 4 (Combines with 2.8 optical zoom to provide zoom equivalent to 11.2 max.)
00_Optio43WR-E.book Page 117 Wednesday, February 25, 2004 1:23 PM
Viewfinder LCD monitor Playback Functions Autofocus system
Real optical zoom viewfinder Wide 0.3, Tele 0.71
1.6-inch TFT color LCD, 85 kilomegapixels Single-frame, 9-frame index, zoom (max. 8), scroll, slideshow, movie playback, sound playback, histogram display, trimming, resize, digital filters Type Capture Range (From lens front) Focus Lock TTL contrast detection by sensor Normal: 0.3m - (full zoom range) Macro: 0.01m - 0.5m (Wide), 0.2m -0.5m (Tele) Infinity-landscape: (full zoom range) By pressing the shutter release button halfway TTL metering by sensor (multi-segment, centerweighted, spot) 2EV (Can be set in 1/3EV steps)
Manual Focus Exposure Mechanism
0.01m - (Wide), 0.2m - (Tele) AE Metering EV Compensation
Capture Modes Moving Picture Shutter Flash
Program, Picture mode, Moving Picture, Panorama Assist, Voice Recording Recording time by vacant memory Model Speed Model Flash Modes Capture Range Electronic/Mechanical shutter Approx. 1/2000 sec - 4 sec. Automatic flash with red-eye reduction function Auto, Flash Off, Flash On, Auto+Red-eye reduction, Flash On+Red-eye reduction Wide Approx. 0.1m - 2.9m w/Sensitivity AUTO Tele Approx. 0.5m - 2.1m w/Sensitivity AUTO
The software cannot be used on Windows 95. We recommend using the AC Adapter D-AC5 (optional) when connecting your camera to your PC. Your image data could be corrupted if your batteries run out during image transfer.
00_Optio43WR_PC-E.book Page 6 Thursday, February 12, 2004 10:33 AM
Installing the Software
This section describes the procedures for installing the necessary software.
Installing the USB driver p.6 Installing the image processing software (ACDSee for PENTAX) p.10
Installing the USB driver on Windows 98/98 SE only
If you are using Windows 2000, Windows Me or Windows XP, you do not need to install the USB driver. When you connect the camera to your computer with the USB cable, your computer will automatically detect the camera as [Removable Disk].
Turn your computer on. Insert the CD-ROM (S-SW18) into the CD-ROM drive.
The PENTAX Software Installer screen appears automatically, but no action is required at this stage.
Make sure the camera is turned off and connect it to your computer with the USB cable.
Turn your camera on.
Your computer will automatically detect the camera as new hardware and the Wizard screen will appear.
00_Optio43WR_PC-E.book Page 7 Thursday, February 12, 2004 10:33 AM
Select [Search for the best driver for your device] and click [Next].
Select [CD-ROM drive] and click [Next].
If another item has been selected, click the box to deselect it.
Confirm that [PENSSTOR.INF] is displayed and click [Next].
Installation of the driver starts.
00_Optio43WR_PC-E.book Page 8 Thursday, February 12, 2004 10:33 AM
When installation is finished, installation of the driver for the new hardware starts.
00_Optio43WR_PC-E.book Page 9 Thursday, February 12, 2004 10:33 AM
Confirm that [PENSPDR.INF] is displayed and click [Next].
When installation is finished, the Wizard window is exited.
Double-click [My Computer] on the desktop.
A removable disk will be added.
00_Optio43WR_PC-E.book Page 10 Thursday, February 12, 2004 10:33 AM
Installing the image processing software (ACDSee for PENTAX)
This section describes the procedures for installing ACDSee for PENTAX which lets you view and edit recorded images on your computer.
When multiple accounts have been setup in Windows 2000 or Windows XP, login by the authority of the administrator before installing the software.
Turn your computer on. Insert the CD-ROM (S-SW18) into your CD-ROM drive.
The PENTAX Software Installer screen is displayed on the desktop.
When the PENTAX Software Installer screen is not displayed Display the PENTAX Software Installer screen following the steps below. 1 Double-click [My Computer] on the desktop. 2 Double-click the [CD-ROM drive (S-SW18)] icon. 3 Double-click [Setup.exe].
00_Optio43WR_PC-E.book Page 15 Thursday, February 12, 2004 10:33 AM
The [Browse For Folder] screen is displayed.
Select a destination folder and click [OK].
The image is copied to the PC, and the ACDSee for PENTAX Browser starts.
00_Optio43WR_PC-E.book Page 16 Thursday, February 12, 2004 10:33 AM
When the Device Detector screen is not displayed.
Double-click the [ACDSee for PENTAX] icon on the desktop. Double-click [My Computer].
Double-click [Removable Disk] (If the SD Memory Card has a volume label name, then select that name).
Double-click the [DCIM] folder.
Click the [xxxPENTX] folder. (xxx is a 3-digit number.)
00_Optio43WR_PC-E.book Page 17 Thursday, February 12, 2004 10:33 AM
Select [Copy To] from the [Edit] menu.
The Copy Files screen is displayed.
Click [More>>] and select the destination folder.
The image is copied to the PC.
00_Optio43WR_PC-E.book Page 18 Thursday, February 12, 2004 10:33 AM
Disconnecting the Camera from your PC
Windows 2000 / Me
Double-click the [Unplug or eject hardware] icon in the task bar recognized area.
The [Remove Hardware] screen will appear.
Confirm that [PENTAX USB DISK Device] is selected and click [Stop].
The [Stop Hardware Device] screen will appear.
Confirm that [PENTAX USB DISK Device] is selected and click [OK].
A message will appear.
Click [OK]. Turn off the camera and disconnect the USB cable from your camera and PC.
The computer is downloading the cameras image data with the camera is connected to the computer and the camera viewfinder lamp (red) is blinking. Image data may be damaged if you disconnect the camera during such conditions. In the event that an error message is displayed in Step 4, confirm that the viewfinder lamp is not blinking and then disconnect the camera.
00_Optio43WR_PC-E.book Page 19 Thursday, February 12, 2004 10:33 AM
Double-click the [Safely Remove Hardware] icon in the task bar recognized area. Click [PENTAX USB DISK Device] and click [Stop].
Click [PENTAX USB DISK Device] and click [OK].
When a message is displayed permitting removal, turn the camera off and disconnect the USB cable from your camera and PC.
Windows 98 / 98 SE
There is no hot plug icon in Windows 98 / 98 SE. Confirm that the viewfinder lamp (red) is not blinking before disconnecting the camera, simply turn off the camera and disconnect the USB cable.
00_Optio43WR_PC-E.book Page 20 Thursday, February 12, 2004 10:33 AM
You can use the provided USB cable (I-USB7) or a card reader to transfer your digital cameras images to the Mac, and you can edit and print your images using the image viewing software. Here, the method for viewing images with the provided software (S-SW18) is explained.
The following software is included in the CD-ROM (S-SW18) provided. Image viewing / editing software (ACDSee for PENTAX) Panoramic image software (ACD Photostitcher)
OS: Mac OS 9.0-9.2/10.1 or higher USB port must be standard equipment * Installation of the driver is not necessary.
<ACDSee for PENTAX and ACD Photostitcher> (6 languages: English, German, French, Spanish, Italian, Japanese) OS: Mac OS 8.6 or higher (requires QuickTime 4.0 or higher and the latest version of CarbonLib) CPU: Power Macintosh 266MHz or higher Memory: 8MB minimum Hard Disk space: 6MB minimum * The classic system is necessary when using ACD Photostitcher with Mac OS X or higher. * Operation is not guaranteed on all PCs meeting the system requirements.
We recommend using the AC Adapter D-AC5 (optional) when connecting your camera to your PC. Your image data could be corrupted if your batteries run out during image transfer.
00_Optio43WR_PC-E.book Page 21 Thursday, February 12, 2004 10:33 AM
Installing ACDSee for PENTAX
Turn your Macintosh on. Insert the CD-ROM (S-SW18) in the CD-ROM drive. Double-click the CD-ROM (S-SW18) icon. Double-click the [Install ACDSee] icon.
The PENTAX Software Installer screen is displayed on the desktop. Double-click the [Master Installer] icon to display [PENTAX Software Installer] screen.
Click your applicable Mac OS.
The software selection screen will appear.
The setup screen will appear. Follow the on-screen guidance to input registration information and install the software.
00_Optio43WR_PC-E.book Page 22 Thursday, February 12, 2004 10:33 AM
If the message [CarbonLib-xxxxx could not be found] is displayed during installation, you must add the function expansion file called CarbonLib to the function expansion folder in the system folder in order to install the provided software in Mac OS 8.6 - 9.2. This error message is appeared when this function expansion file is not present or when an old version of the file is present. The latest version of the Carbon Lib is available on the Apple website. Download the file and then install it onto Mac OS. Apple website: http://www.Apple.com Contact Apple for detailed information on how to use Carbon Lib.
Installing ACD Photostitcher
This section describes the procedures for installing ACD Photostitcher which lets you join a number of images together to form a panorama picture.
Double-click [ACD Photostitcher].
The licensing agreement will appear on the screen. When you have read it, click [Agree] to accept the terms of the agreement.
Choose a destination for the software and click [Install].
Installation starts. When the message appears telling you that the software has been successfully installed, click [Quit].
00_Optio43WR_PC-E.book Page 23 Thursday, February 12, 2004 10:33 AM
Please click the [Product Registration] of the CD-ROM screen in step 7 on the page 21 of this PC manual. A world map of the Internet Product Registration is displayed. If your PC is connected to the Internet, click the displayed country or region and then follow the instructions to register your product. Thank you very much for your cooperation.
Displaying Images on your Macintosh
00_Optio43WR_PC-E.book Page 24 Thursday, February 12, 2004 10:33 AM
Displaying images on your Macintosh
Turn your Macintosh on. Turn your camera off and connect it to the Macintosh with the USB cable.
Confirm that the SD Memory Card is inserted in the camera when the images in the SD Memory Card are copied/displayed.
The camera is recognized as [untitled] ([NO_NAME] in OS X) on the desktop. The folder name can be changed.
Double-click the [ACDSee] folder on the desktop. Double-click the [ACDSee] program icon.
An image list (Browser) is displayed.
Open the camera folder.
The camera images are in the [untitled] (or volume label name if the SD Memory Card has one) [DCIM] [XXXPENTX] (XXX is a three-digit number) folder. An image list of the camera is displayed.
00_Optio43WR_PC-E.book Page 25 Thursday, February 12, 2004 10:33 AM
Select the image to view from the image list.
Double-click the image you selected. A full-size image is displayed (Viewer).
If the SD Memory Card has a volume label, the volume label name will be displayed instead of untitled. A new SD Memory Card unformatted may show the manufacturer name or model number.
Copying images to your Macintosh
See your Macintosh users manual for how to copy or move files. Please copy images to your Macintosh before editing them.
Disconnecting your Camera from your Macintosh
Drag [untitled] (or the volume label name on the SD Memory Card) to your trash. Disconnect the USB cable from your camera and your Macintosh.
00_Optio43WR_PC-E.book Page 26 Thursday, February 12, 2004 10:33 AM
About ACDSee for PENTAX
ACDSee for PENTAX is a comprehensive software package that acquires, organizes, displays, processes, and shares digital camera images. You can use the Browser ( p.27) to acquire digital camera images efficiently. You then can organize them in your favorite way and even display them as thumbnails. You can use the Viewer ( p.34) to view a large version of a single image. Further, when you install ACDSee for PENTAX which is on the provided CD-ROM (S-SW18) on a Windows PC, the panoramic image software Photostitcher, the image layout software FotoSlate, and the image editing software FotoCanvas are also installed at the same time. Use this software to enjoy an even higher degree of freedom in your image creation, editing and processing. This manual provides explanations regarding the most basic ACDSee for PENTAX functions. Refer to the Help section in ACDSee for PENTAX for detailed information.
Launching ACDSee for PENTAX
Double-click the [ACDSee for PENTAX] icon on the desktop.
ACDSee for PENTAX will launch and an image list (Browser) will be displayed.
Double-click the [ACDSee for PENTAX] folder on the desktop. Double-click the [ACDSee for PENTAX] program icon.
To exit ACDSee for PENTAX
Select [Exit] from the [File] menu in the Browser or the Viewer.
00_Optio43WR_PC-E.book Page 27 Thursday, February 12, 2004 10:33 AM
Viewing using the Browser
In ACDSee for PENTAX, you can view images using either the Browser, which displays a list of images, or the Viewer, which display one image at a time. The Browser is displayed when you launch ACDSee for PENTAX.
About the Browser
Here, explanations are provided regarding Browser configuration as well as names and functions within the Browser.
Menu bar You can select and execute the various functions and settings of the ACDSee for PENTAX by choosing the menu items from the menu bar.
00_Optio43WR_PC-E.book Page 28 Thursday, February 12, 2004 10:33 AM
Browser toolbar Browser toolbar includes shortcut buttons for commonly used functions and tools. These buttons open dialog boxes or display further activity buttons. You can customize the toolbar by turning the button labels on or off, adding or removing buttons, and changing the size of the buttons. Navigation pane Navigation pane displays a folder tree of the folders on your computer, extra drive, or peripheral device. Navigation pane includes the Folders, Calendar, Categories, Photo Discs, and Albums tabs. You can select these tabs to display their contents in the File pane, or to organize your files and folders. Preview pane Preview pane displays the image selected in the File pane. File list toolbar With these shortcut buttons, you can copy, move or delete items, select what file types or folders to display in the File pane, and sort your images. You can customize the toolbar by turning the button labels on or off, adding or removing buttons, and changing the size of the buttons. Path box Path box describes the location of the folder of images currently displayed in the File pane. File pane File pane displays the contents of a folder selected in the Navigation pane as a list of files or as thumbnails. You can sort your images by such criteria as file name, file extension, file size, file date, etc. Status bar Status bar displays information and properties for the selected folder, file or files.
When these categories are not displayed, check ( you want to display in the [View] menu.
) the categories
00_Optio43WR_PC-E.book Page 29 Thursday, February 12, 2004 10:33 AM
Menu bar You can select and execute the various functions and settings of the ACDSee for PENTAX by choosing the menu items from the menu bar. Browser toolbar Browser toolbar includes shortcut buttons for commonly used functions and tools. These buttons open dialog boxes or display further activity buttons. Navigation pane Navigation pane displays a folder tree of the folders on your computer, extra drive, or peripheral device. Preview pane Preview pane displays the image selected in the File pane.
00_Optio43WR_PC-E.book Page 30 Thursday, February 12, 2004 10:33 AM
File pane File pane displays the contents of a folder selected in the Navigation pane as a list of files or as thumbnails. You can sort your images by such criteria as file name, file size, file date, etc.
Changing the Browser display method
You can select any of the following 6 methods to display lists of images in the Browser. Select [Mode] in the [View] menu and then select a display method from the submenu. You can choose from the following display methods. Thumb+Details Display image file thumbnails and file information in a list format. p.33) You can change the file information that is displayed. ( Thumbnails Display image file thumbnails. Large Icons Display large icons and file names. Small Icons Display small icons and file names. List Display small icons and file names in a list format. Details Display small icons and file information in a list format. p.33) You can change file information that is displayed. (
00_Optio43WR_PC-E.book Page 31 Thursday, February 12, 2004 10:33 AM
Viewing images in other folders
To view images stored in other folders, select a folder from the folder tree in the Browser Navigation pane or directly specify a folder in the path box.
Selecting a different folder in the folder tree
Folders selected from the folder tree are designated as the current folder and images from that folder are displayed in the File pane.
To display a subfolder is displayed next to the folder icon of folders that contain subfolders. Click to display the subfolders. is displayed next to folders when subfolders are displayed. Click to hide the subfolders.
Use the buttons on the Browser toolbar to select a different folder.
You can view the contents of the folder one level above the current folder by clicking in the Browser toolbar. You can view the contents of the folder displayed prior to the current folder by clicking in the Browser toolbar. When you use in the Browser toolbar to change the displayed folder, click to return to the folder displayed after the current folder.
You can adjust row width to match the amount of text displayed in the list. Align the cursor with the edge of the row header. Click on the edge when the cursor changes to a left-right arrow head and drag the edge to adjust the row width.
Double-clicking the left mouse button on the row header separator will automatically adjust the row width to match the length of the list text.
00_Optio43WR_PC-E.book Page 34 Thursday, February 12, 2004 10:33 AM
Viewing a Large Version of an Image (Viewer)
Double-click on a single image file selected in the Browser to display a full-screen view of that image.
About the Viewer
Here, explanations are provided regarding Viewer configuration as well as names and functions within the Viewer.
00_Optio43WR_PC-E.book Page 35 Thursday, February 12, 2004 10:33 AM
Viewer toolbar Viewer toolbar includes shortcut buttons for commonly used functions and tools such as the Zoom tools. You can customize the toolbar by turning the button labels on or off, adding or removing buttons, and changing the size of the buttons. Viewer pane Viewer pane displays your images one at a time in full resolution. Status bar Status bar displays information and properties for the selected folder, file or files.
When the viewer is displayed, you can close the viewer and switch to the browser by performing any of the following. Click the (close) button. Double-click on the viewer pane border. Press the [Esc] key on the keyboard.
00_Optio43WR_PC-E.book Page 36 Thursday, February 12, 2004 10:33 AM
Panorama Image Stitching with ACD Photostitcher
With ACD photostitcher installed on a Windows PC, you can panorama stitch the images you took in Panorama Assist mode. The folder and image names displayed on the explanatory screenshots will differ according to the setup of your PC.
When multiple accounts have been setup in Windows 2000 or Windows XP, login by the authority of the administrator before using ACD Photostitcher. Install ACD Photostitcher and ACDSee for PENTAX separately when using a Macintosh. Panorama stitching cannot be performed on images of varying save sizes.
Panorama Image Stitching on a Windows PC
Run ACDSee for PENTAX.
An image list is displayed.
Select the images for panorama stitching from the image list.
Press the [Ctrl] key on the keyboard while clicking on pictures to select multiple images. After selecting the images, select [Extras] from the [Activities] menu, and select [Photostitcher] from the submenu. The [Photostitcher] is not enabled if two or more images are not selected.
00_Optio43WR_PC-E.book Page 37 Thursday, February 12, 2004 10:33 AM
Correct the image positioning.
ACD photostitcher starts, and the selected images are displayed in panorama format. Move the mouse pointer onto the image. It changes into a e symbol. Hold down the left mouse button and drag the images to adjust the stitching position. When the position is adjusted, click the [STITCH] button.
2 Click the [STITCH] button.
1 Click and drag to adjust position.
Select the stitching method.
You can choose the stitching method from [Big Plane] and [Cylinder]. Here, you will create a flat panorama. Click the [Big Plane] button. A confirmation message is displayed. Click [OK].
Click [Big Plane].
Click [OK] and continue if a screen like the one shown left is displayed.
00_Optio43WR_PC-E.book Page 38 Thursday, February 12, 2004 10:33 AM
Trim the image.
Move the mouse pointer onto an image. It changes into a symbol. Hold down the left mouse button and drag the dotted lines to adjust the image trimming position. When the position is adjusted, click the [Trimming] button.
2 Click the [Trimming] button.
1 Trim the image.
Save the image.
After confirming your trimming, click the [Save] button to save the image. To cancel the trimming, click the [Cancel Trimming] button. When you are done, close ACD photostitcher and ACDSee for PENTAX.
Click the [Save] button.
[Cancel Trimming] button
00_Optio43WR_PC-E.book Page 39 Thursday, February 12, 2004 10:33 AM
Panorama Image Stitching on a Macintosh
Run ACD Photostitcher. Click the [Load] button.
The folder selection screen is displayed.
Select the folder for panorama stitching, and then click the [Choose] button.
The image files in the selected folder are displayed.
Select all the images for panorama stitching and then click the arrow on the right.
The selected images are displayed on the image layout palette in the alignment window.
Stitching method button
Setting the stitching parameters.
Click the Stitching method button to open the stitching parameter selection window. You can choose the stitching method from [Big Plane] and [Cylinder]. Here, you will create a flat panorama. Choose the [Big Plane] button and click [OK].
00_Optio43WR_PC-E.book Page 40 Thursday, February 12, 2004 10:33 AM
Click the [Automatic alignment] button.
The selected images are displayed in panorama format.
Click the image you want to move and display it in a red frame. Hold down the mouse button and drag the image to adjust the stitching position. For easier adjustment of two images that are next to each other, click the [Align 2 images] tab to enlarge the section where the images overlap.
Hold down the mouse button to adjust the stitching position.
00_Optio43WR_PC-E.book Page 41 Thursday, February 12, 2004 10:33 AM
Click the [Stitch] button.
Stitching starts. When finished, the stitched picture is displayed.
Click the [Trim] button to display the dotted lines around the image. Move the mouse pointer onto the dotted lines. It changes into a symbol. Hold down the mouse button and drag the dotted lines to adjust the image trimming position. When the position is adjusted, click the [Trim] button again. To cancel the trimming, click the [Undo] button. After confirming your trimming, click [OK].
1 Click the [Trim] button. 3 Click the [Trim] button. 4 Click the [OK] button. 2 Trim the image.
Click the [Save] button to save the image. When you are done, close ACD photostitcher.
00_Optio43WR_PC-E.book Page 42 Thursday, February 12, 2004 10:33 AM
You can print image files from the Browser or the Viewer.
Printing from the Browser
You can print one or more images from the Browser.
Select one or more images.
To print several images, press the [Ctrl] key on the keyboard while clicking on pictures to select multiple images for printing.
Select [Print Images] from the [File] menu.
The Print dialog box is displayed.
Select or change the printing options. Click [Print].
Printing from the Viewer
You can print the currently viewed image, or all images that reside in the same folder as the currently viewed image.
Select [Print Image] from the [File] menu to print the currently viewed image. or Select [Print All Images] to print all images in the same folder.
00_Optio43WR_PC-E.book Page 43 Thursday, February 12, 2004 10:33 AM
To insert the date and print and image
You can insert the date into an image file and print it. Date insertion settings are done in the Print dialog box.
Select the [Caption] tab in the Print dialog box. Check the [Print image capture date in the corner of images] check box.
Creating and Printing contact sheets
You can create and print contact sheets of your images. You can add captions to each image, page headers and footers, and control thumbnails size.
In the Browser, select a group of images.
Press the [Ctrl] key on the keyboard while clicking on pictures to select multiple images for printing.
Select [Print Contact Sheet] from the [File] menu.
The Print Contact Sheet dialog box is displayed.
Select or change the printing options. Click [OK].
For more information about creating and printing contact sheets, click the Help button in the Print Contact Sheet dialog box.
00_Optio43WR_PC-E.book Page 44 Thursday, February 12, 2004 10:33 AM
E-mailing your Images from ACDSee for PENTAX
You can send images directly from the ACDSee for PENTAX without using an external e-mail application. (E-mail account setup is required. See the ACDSee for PENTAX Help section for details.) Image files are converted to JPEG format then attached to an e-mail and sent. Images are compressed before transmission when the file size is large but no changes are made to the original image.
E-mail function of ACDSee for PENTAX is not compatible with Macintosh.
In the Browser, select an image or a group of images.
To select several images, press the [Ctrl] key on the keyboard while clicking on pictures to select multiple images.
Select [Share] from the [Activities] menu, then select [E-mail].
The Send E-mail dialog box is displayed.
Input the required information. Click [Send].
For more information about e-mailing your images, click the Help button in the Send E-mail dialog box.
An error message may be displayed and you may not be able to send mail if your mail server security is set to a high level.
00_Optio43WR_PC-E.book Page 45 Thursday, February 12, 2004 10:33 AM
ACDInTouch uses the Internet to display the latest information about ACDSee for PENTAX. You can access information related to special offers, free digital imaging resources, newsletters, subscriptions and more.
To connect to ACDInTouch
Select [ACDInTouch] from the [Help] menu.
The Connect to ACDInTouch dialog box is displayed.
Click [Connect Now].
About the ACDInTouch services
03_Optio43WR_PC-E.fm Page 46 Thursday, February 19, 2004 9:39 AM
2-36-9,Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.pentax.co.jp/) PENTAX Europe GmbH (European Headquarters) Julius-Vosseler-Strasse, 104, 22527 Hamburg, GERMANY (HQ - http://www.pentaxeurope.com) (Germany - http://www.pentax.de) PENTAX U.K. Limited PENTAX House, Heron Drive, Langley, Slough, Berks SL3 8PN, U.K. (http://www.pentax.co.uk) PENTAX France S.A.S. 12/14, rue Jean Poulmarch, 95106 Argenteuil Cedex, FRANCE PENTAX Benelux B.V. (for Netherlands) Spinveld 25, 4815 HR Breda, NETHERLANDS (http://www.pentax.nl) (for Belgium & Luxembourg) Weiveldlaan 3-5, 1930 Zaventem, BELGIUM (http://www.pentax.be) Widenholzstrasse 1 Postfach Dietlikon, PENTAX (Schweiz) AG SWITZERLAND (http://www.pentax.ch) PENTAX Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN (http://www.pentax.se) PENTAX U.S.A., Inc 600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A. (http://www.pentax.com) PENTAX Canada Inc. 1770 Argentia Road Mississauga, Ontario L5N 3S7, CANADA (http://www.pentaxcanada.ca)
Printed on recycled paper Specifications and external dimensions are subject to change without notice. 57363 Copyright PENTAX Corporation 2004 01-200402 Printed in Japan
4000 W GPS 400 DSC-T100 B QB5175 W P6300 Satellite U305 XT6200 XT350-1998 KD-G342 HEM-775 VP-M110S C4907 NGP745UC L12720VIT Infiniti Q45 DSP256 12 X Linux BDP-S373 DVD-C550KD VN-5200PC FE-700 DCT3412 FL824C Panasonic A100 DL18MT EDS Korg 770 W705I Avic-F500BT LE32A436t1D HM0860C GT-9600 Aswqlgu KX-TGA810FX Voicemailpro ACS33 Philips FW26 OKO-favorit 5071 ZHC918X Latitude C840 Cyclecomputing C3 CDX-397 Vectra VLI8 Siemens TK60 85745 EG-101 Autoportee SG15 Optio 43WR Digital Camera DVD 592 Incopy CS2 Easyshare ONE Fanuc R-J2 Express Plus 160IS-MB T-1000 LE32A450 RT-211 Iden I870 Tempest PRO Dell 1710 P2450H MS-7104 BSV-2653 Fantasy X-2 CE3280ZP Sport-2006 Yamaha DX11 B5941-5-M 42PFL5322 YST-SW030 CDX-4250R Wildcat C5 MX2004A CQ-VA7800N Titan GT-S8300 IC-F110S MS-324F H-46001803 EN SC-HC3 326GSM Msac-mmds SR5002 WM-EX506 Audiobox USB LD-05AW2 Cdxl350 Dragon ECC 700 DUO DVD 21 DVP-S536D VDR-D220EE Night P6-24 B Verification Unit 680 ZX RCD-W1 HS840 Player 1GB T29SC
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101