Reviews & Opinions
Independent and trusted. Read before buy Pentax Optio E20!

Pentax Optio E20

Manual

Download (English)
Pentax Optio E20 Digital Camera, size: 1.9 MB
Related manuals
Pentax Optio E20 Quick Guide
Pentax Optio E20 Quick Start Guide

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Pentax Optio E20About Pentax Optio E20
Here you can find all about Pentax Optio E20 like manual and other informations. For example: digital camera, driver.

Pentax Optio E20 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Pentax Optio E20 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Pentax Optio E20 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
assi23q 8:34pm on Thursday, October 21st, 2010 
I have up to now been very pleased with my Pentax Optio E20, but after only eighteen months it has failed.
johnleeb 5:14am on Tuesday, May 25th, 2010 
I was very disappointed with this camera. It appears to be an update of the E10 which has received poor reviews.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

QUICKSTART GUIDE Tutorials
Pentax Optio E20 - Settings

1 Introduction

If you received your PENTAX Optio E20 from PREVISITE it is already configured and ready for use. If you bought your PENTAX Optio E20 from a local dealer, please setup camera with the following settings.
Caution If you are using Windows Vista, your PENTAX Optio E20 may take a while before it is recognized. the use of a SdCard reader is highly recommended.

Important Settings 2

Set up the camera on the P Program (Automatic) Set up the NO FLASH mode by pressing the symbol until flash mode appears on the LCD screen. Set up the Zoom to its minimum Position (Zoom Out) Use the default settings of the camera
Best results are obtained when using the P program (automatic). Do not try to increase or reduce luminosity (EV menu) and always keep it on 0.
3 PENTAX Optio E20 Default settings
While on the P Program, press the menu button and make sure you have the following settings :
Recorded Pixels : 6M Quality Level : ***(high) White Balance : AWB(Auto) ISO Sensitivity : Auto
AE metering: Center-weighted Digital Zoom : On Instant review : On
Color : FULL Sharpness : High Saturation : Medium Date Print : Off
PREVISITE AMERICA 33 West 19th Street Fourth Floor New York NY 10011 Phone: 877-536-7180 (Toll Free)
PREVISITE FRANCE 40 bd Henri Sellier 92150 Suresnes Phone: 75
PREVISITE JAPAN Shin Yokohama Daini Center Bldg. 3-19-5 Shin Yokohama, Kohoku-ku Yokohama 222-0033 Phone: 045-478-6041

doc1

Thank you for purchasing this PENTAX Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the cameras capabilities. Regarding copyrights Images taken using the PENTAX Digital Camera that are for anything other than personal enjoyment cannot be used without permission according to the rights as specified in the Copyright Act. Please take care, as there are even cases where limitations are placed on taking pictures even for personal enjoyment during demonstrations, performances or of items on display. Images taken with the purpose of obtaining copyrights also cannot be used outside the scope of use of the copyright as laid out in the Copyright Act, and care should be taken here also. To users of this camera There is a possibility that recorded data may be erased or that the camera may not function correctly when used in surroundings such as installations generating strong electromagnetic radiation or magnetic fields. The liquid crystal panel used in the LCD display is manufactured using extremely high precision technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image. Regarding trademarks PENTAX, Optio and smc PENTAX are trademarks of PENTAX Corporation. SD logo ( ) is a trademark. QuickTime and QuickTime logo are trademarks used under license. The QuickTime logo is registered in U.S. and other countries. All other brands or product names are trademarks or registered trademarks of their respective owners.
Regarding PictBridge PictBridge allows the user to connect the printer and digital camera directly, using the unified standard for the direct printout of images. You can print images directly from the camera through a few simple operations. This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printers that are not PRINT Image Matching III compliant.
There is a possibility that the illustrations and the display screen of the LCD monitor in this manual are different from the actual product.

USING YOUR CAMERA SAFELY

We have paid close attention to the safety of this product. When using this product, we request your special attention regarding items marked with the following symbols. Warning This symbol indicates that ignoring this item could cause serious personal injury. Caution This symbol indicates that ignoring this item could cause minor or medium personal injury, or material loss.

About the Camera

Warning Do not attempt to take the camera apart or remodel the camera. High voltages are present within the camera, and there is therefore a danger of electric shocks if the camera is taken apart. If the inside of the camera should become exposed as a result of, for example, the camera being dropped, please do not under any circumstances touch such exposed portions, as there is a danger of receiving an electric shock. Wrapping the strap of the camera around your neck is also dangerous. Please take care that small children do not hang the strap around their necks. To avoid the risk of it being swallowed by mistake, keep the SD Memory Card out of the reach of small children. Seek medical attention immediately if an SD Memory Card is accidentally swallowed. Use an AC adapter that is of the power and voltage specified for exclusive use with this product. The use of an AC adapter other than that specified exclusively for use with this product may cause fire or electric shocks. If the camera emits smoke or a strange smell, or in the event of any other irregularity, stop using the camera immediately, remove the battery or disconnect the AC adapter and contact your nearest PENTAX service center. Continued use of the camera may result in fire or electric shock.
Caution Never try to disassemble or short the battery. Also, do not dispose of the battery in fire, as it may explode. Do not charge any batteries other than rechargeable Ni-MH batteries. The battery could explode or catch fire. Of the batteries that can be used in this camera, only the Ni-MH battery can be recharged. Do not place your finger on the flash when it is discharging as there is a risk of burns. Do not discharge the flash while it is touching your clothing as there is a risk of discoloring. If any battery leakage should come in contact with your eyes, do not rub them. Flush your eyes with clean water and get medical attention immediately. If any battery leakage should come in contact with skin or clothes, wash the affected areas thoroughly with water. Remove the battery from the camera immediately if it becomes hot or begins to smoke. Be careful not to burn yourself during removal. Some portions of the camera heat up during use, so please take care, as there is a risk of low temperature burns if such portions are held for long periods of time. Should the LCD be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal to get on your skin or in your eyes or in your mouth.

Handling precautions for batteries
This camera uses two AA Ni-MH or AA alkaline batteries. Do not use batteries other than those specified here. Using some other type of battery may cause the camera to function poorly, or the batteries may rupture or cause a fire. AA alkaline battery cannot be recharged. Do not try to take the batteries apart. The batteries may rupture or leak if you try to charge them or take them apart. Do not replace the batteries with batteries that are different brands, types or capacities. Also, do not combine old batteries with new ones. Doing so may cause the batteries to rupture or cause a fire. Do not insert the batteries with the positive (+) and negative (-) poles in the wrong orientation. Doing so may cause the batteries to rupture or cause a fire. Do not remove the external seal of the batteries. If the seal is removed, the batteries may short and may cause a fire, rupture, leak or heat.

About the AC Adapter

Caution Do not place heavy objects on the AC plug cord, allow heavy objects to drop onto it or allow the AC plug cord to become damaged due to excessive bending. If the AC plug cord becomes damaged, consult a PENTAX Service Center. Do not short or touch the output terminals of the product while it is still plugged in. Do not plug in the AC plug cord with wet hands. This can cause an electrical shock. Do not subject the product to strong impacts or allow it to drop onto a hard surface. This can cause a malfunction.
Care to be Taken During Handling
Take the international warranty card with you when you travel abroad. Also take the Worldwide Service Network list that is included in the package. This will be useful if you experience problems abroad. When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or during traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (SD Memory Card), etc. The lens on this camera is not exchangeable. The lens is not removable. Do not clean the product with organic solvents such as thinner, alcohol or benzene. Places of high temperature and humidity should be avoided. Particular care should be taken regarding vehicles, which can become very hot inside. Storing the camera where pesticides and chemicals are handled should be avoided. Remove from case and store in a well-ventilated place to prevent the camera from becoming moldy during storage. Do not use the camera where it may come in contact with rain, water or any other liquid, because the camera is not weather, water, or liquid resistant. Ensure that the camera is not subjected to substantial vibrations, shocks or pressure. Place the camera on a cushion for protection when the camera is subjected to the vibrations of a motorbike, car, or ship, etc. The temperature range in which the camera can be used is 0C to 40C (32F to 104F). The liquid crystal display will become black at high temperatures but will return to normal when normal temperatures are returned to. The response speed of the liquid crystal display becomes slow at low temperatures. This is due to the properties of the liquid crystal and is not a fault. Periodic checks are recommended every 1 to 2 years in order to maintain high performance. If the camera is subjected to rapid temperature changes, condensation may form on the inside and outside of the camera. Therefore put the camera in a bag or plastic bag, and take the camera out when the difference in temperature has subsided. Avoid contact with garbage, dirt, sand, dust, water, toxic gases, salt, etc. as this may cause damage to the camera. If rain or drops of water get onto the camera, please wipe dry. EN-6

Refer to the section in this manual titled Precautions When Using an SD Memory Card (EN-21, 22) Please do not press forcefully on the LCD monitor. This could cause breakage or malfunction. Be careful not to sit down with the camera in your back pocket as this may damage the exterior of the camera or the LCD monitor. When using a tripod with the camera, be careful not to overtighten the screw in the tripod socket on the camera.

CONTENTS

INTRODUCTION..10

Package Contents.. 11

TAKING IMAGES.. 29
Taking Images... 29 Using the Mode Dial.. 30 Setting Image Resolution and Quality.. 31 Using the Zoom Function.. 32 Using the Flash.. 33 Setting Focus Mode.. 34 Drive Mode... 35
High Speed Continuous.. 35 Auto Bracket... 36 Self-Timer.. 37
GETTING TO KNOW YOUR CAMERA..12
Front View.. 12 Mode Dial... 12 Rear View.. 13 LCD Monitor Information.. 14

PREPARING THE CAMERA.17

Installing the Batteries... 17 Using the AC Adapter with a Household Power Supply (Optional Accessory). 18 Inserting and Removing an SD Memory Card (Optional Accessory).. 20 Attaching the Camera Strap.. 23
Adjusting the Exposure (EV Compensation). 39 Setting White Balance... 40 Recording Movie Clips... 41
PLAYING BACK AND DELETING IMAGES. 42
Viewing Images... 42 Magnifying Images.. 43 Thumbnail Display.. 44 Playing Back Movie Clips. 45 Slideshow Display.. 46 Deleting Images/Movie Clips. 47 Protecting Images/Movie Clips.. 48 Playing Back Still Images/Movie Clips on TV. 50

GETTING STARTED..24

Turning the Power On/Off. 24 LED Indicator and Self-timer Indicator.. 24 Choosing the Screen Language. 25 Setting the Date and Time.. 26 Formatting an SD Memory Card or Internal Memory... 27 Using the LCD Monitor.. 28
EDITING AND PRINTING IMAGES.. 51
Changing Image Resolution and Quality. 51 Copying Files.. 52 Setting the DPOF.. 53 Connecting to a PictBridge-Compatible Printer. 55
TRANSFERRING FILES FROM YOUR DIGITAL CAMERA TO COMPUTER.. 59
Step 1: Install the USB driver.. 59 Step 2: Connect the digital camera to your computer... 60 Step 3: Download images or movie clips. 61 Editing Software Requirements.. 62 Installing ACDSee for PENTAX. 63

MENU OPTIONS.. 64

Still Picture Capture Menu.. 64 Movie Menu.. 69 Playback Menu.. 70 Setup Menu.. 73
CONNECTING THE DIGITAL CAMERA TO OTHER DEVICES.. 77 SPECIFICATIONS... 78 APPENDIX... 80 WARRANTY POLICY... 87

INTRODUCTION

Thank you for purchasing this new digital still camera! Equipped with a 6.0 Megapixels CCD sensor, your camera delivers high quality, 2816 x 2112 resolution images. Other features provided by the camera include the following: 6.0 Megapixels A high-resolution CCD sensor provides 6.0 megapixels for high quality of images. Auto flash An auto flash sensor automatically detects the shooting (lighting) conditions and determines whether the flash should be used. 2.4 TFT color image LCD monitor Optical zoom: 1x~3x Digital zoom: 1x~4x Approx. 13MB internal (built-in) memory Images can be captured without using an SD Memory Card. Support for SD Memory Card for memory expansion You may wish to expand the memory capacity by using an additional SD Memory Card. USB connection Still images or movie clips that you have recorded can be downloaded to your computer using the USB cable (A USB driver is required for Windows 98/98SE). DPOF functionality DPOF can be used to print your images on a DPOF compatible printer by simply inserting the SD Memory Card. PictBridge support You can connect the camera directly to printer that supports PictBridge and perform image selection and printing using the camera LCD monitor and controls. Provided editing software: ACDSee for PENTAX You can enhance and retouch your images on your computer by using the provided editing software.

100-0001

Q P O N M L K
1/7 ISO100 +0.3 1/125 F2.8

D E F G H I

01/09/2006 12:00
Movie Playback 1. Playback mode 2. Movie mode 3. File number of movie 4. Memory status 5. Battery power indicator 6. Index number of total number 7. Elapsed time 8. Date 9. Time 10. Four-way controller guide

PREPARING THE CAMERA

Installing the Batteries
You can use 2 AA size batteries (Ni-MH rechargeable or alkaline) to power the camera. Make sure that the power of the digital camera is off before inserting or removing the batteries. 1. Make sure the camera is turned off. 2. Open the battery/card cover. 3. Insert the batteries in the correct orientation as shown in the illustration. 4. Close the battery/card cover. To remove the batteries, turn the camera off before removing batteries and hold the camera with the battery/card cover facing upward, then open the battery/card cover.
Be careful not to drop the batteries when opening or closing the battery/card cover. Due to the characteristics of AA alkaline batteries, camera performance may deteriorate. AA alkaline batteries are not recommended except in emergencies and checking the camera's functionality.
Using the AC Adapter with a Household Power Supply (Optional Accessory)
DC coupler cable cover AC plug cord

To power outlet

AC adapter

DC terminal

DC coupler DC coupler cable

DC input terminal

Use of the AC adapter kit K-AC51 (optional) with a household power supply is recommended if you intend to use the camera for a long time or connect it to a computer. (The AC adapter kit K-AC51 includes AC adapter D-AC5, DC coupler D-DC51, and AC plug cord D-CO2.) 1. Connect the DC terminal of the AC adapter to the DC input terminal of the DC coupler. 2. Make sure that the camera is turned off and open the battery/card cover. Pull the battery/card cover in the direction of and flip the cover open in the direction of. 3. Insert the DC coupler into the battery compartment, making sure the (+) and () on the coupler match the (+) and () on the battery compartment. EN-18
4. Open the DC coupler cable cover, pass the DC coupler cable through the opening, and close the battery/ card cover. Slide the battery/card cover in the opposite direction of. Slide the battery/card cover all the way in to make sure it is securely closed. 5. Connect the AC plug cord to the AC adapter. 6. Plug the AC plug cord into the power outlet.

3. Use the four-way controller ( button to confirm.
) to select [OK], then press the
Format OK Cancel Select :
When you format an SD Memory Card, be aware that all data on the SD Memory Card will be deleted. Protected images are also deleted. To format the internal memory, do not insert an SD Memory Card into the camera. Otherwise, you will format the SD Memory Card.

Using the LCD Monitor

Your camera is equipped with a 2.4 full color TFT LCD monitor to help you compose images, replay recorded images/movie clips or adjust menu settings. The mode icons, text and numbers displayed on the monitor may vary according to the current settings. LCD monitor display mode changes each time you press the when taking still images
Normal Display Information Display No Icons LCD Off
button in the following order:
when recording movie clips Normal Display No Icons LCD Off
when playing back still pictures Normal Display Information Display No Icons
The LCD monitor darkens in strong sunlight or bright light. This is not a malfunction.

TAKING IMAGES

Taking Images
1. Rotate the mode dial to , , , , or and turn your camera on by pressing the power switch. 2. Compose the image on the LCD monitor so that the main subject is within the focus frame. 3. Press the shutter release button halfway to focus the image. When you press the shutter release button halfway, the cameras Auto Focus feature automatically focuses the image. The focus frame turns green if the subject is in focus. Proper exposure is determined and locked at the same time. 4. Press the shutter release button the rest of the way down to capture the image.
To prevent your images from being blurred while pressing the shutter release button, always hold it carefully. This is especially important when you are shooting under low lighting conditions, since your camera may set longer shutter speeds to ensure your images are properly exposed.

Using the Mode Dial

You can select the shooting mode according to the shooting scene by rotating the mode dial. There are 7 available modes. Shooting Modes Simple mode Program mode Lets you take still pictures without having to set special functions or manual adjustments. The camera sets the optimal focusing and exposure. Lets the camera automatically select the shutter speed and aperture for taking still pictures. You can adjust other functions, such as flash mode or continuous shooting mode. Lets you take pictures of people standing out with the background out-of-focus. Lets you take pictures of landscapes using the optimal settings. Lets you take fast moving objects. Lets you take pictures at night or in dark environments using the optimal settings. The shutter speed is slower when taking pictures of dark scenes. To prevent camera shake, secure the camera on a tripod or other surface. Lets you take movies.

Portrait mode Landscape mode Sport mode Night-Scene mode

Movie mode

Setting Image Resolution and Quality
As you get to know the digital camera, you can set the image resolution (number of vertical and horizontal pixels) and image quality (compression ratio) based on the types of images you want to shoot. These settings affect the number of images that can be stored in the internal memory, or on an SD Memory Card. Higher resolution and higher quality images provide finer detail but cause the images file size to be larger. To change image resolution or image quality, perform these steps below: 1. Rotate the mode dial to , , , , or and turn your camera on by pressing the power switch. 2. Press the MENU button. [Menu1] is displayed. In the mode, [Menu] is displayed. 3. Use the four-way controller ( ) to select [Recorded Pixels], then press the button. 4. Use the four-way controller ( ) to select the desired setting, then press the button to confirm. 5. Follow the step 3 and 4 above to set the [Quality Level].

Menu1 Menu2 Menu3

Recorded Pixels Quality Level White Balance Sensitivity Exit : Select :
Recorded Pixels 2816 x x x 1200
The number of recordable images and recording time depend on the storage size, resolution and quality settings and the subject of the image to be captured. You can resize the images later. Please refer to the section in this manual titled Changing Image Resolution and Quality (EN-51) for further detail.
640 x 480 Cancel : Select :

Using the Zoom Function

This camera is equipped with 3x optical zoom. The lens moves during the optical zoom photography, allowing you to capture telephoto and wide-angle shots. By using the optical zoom function; images appear closer by pressing the button, or smaller away by pressing the button. The zoom bar indicates the current level of magnification. When the zoom is 3 within 3x magnification, the zoom bar is within the optical zoom range. When the digital zoom function is set to On, you can further enlarge the subjects with 4x digital zoom by pressing continuously the button. It is activated after your camera reaches its maximum optical zoom factor (3x) and the zoom bar is within the digital zoom area. You can enlarge the subject to a maximum magnification equivalent to 12 times. A useful feature 2.2X as it is, however, the more the image is enlarged, the more pixelated the image will appear.
Optical zoom range Digital zoom range
To capture a zoomed image, perform the following steps: 1. Rotate the mode dial to , , , , or and turn your camera on by pressing the power switch. 2. Adjust the magnification ratio by using the / button. To exit the zoom photography, press continuously the button. The status of digital magnification is displayed on the LCD monitor. 3. Compose your scene and press the shutter release button.

Focus Mode Standard

Infinity

Drive Mode

High Speed Continuous
This mode is used for continuous shooting. Three pictures are taken continuously once the shutter release button is pressed. Secure the camera to a tripod or place it on a stable surface. 1. Rotate the mode dial to , , , , or. 2. Press the power switch to turn on the power. 3. Press the four-way controller ( / ) and use ( ) to select [High Speed Continuous]. You can also change the setting using four-way controller ( ). 4. Press the button to confirm the setting. The indicator is displayed on the LCD monitor. 5. Press the shutter release button halfway to lock the focus. 6. Press the shutter release button to capture a sequence of three images.
Drive Mode High Speed Continous
In High Speed Continuous mode, the flash mode will be set to Flash Off automatically. The interval will vary according to the Recorded Pixels and Quality Level settings. The focus, exposure and white balance are locked with the first image.

Auto Bracket

In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter release button once. 1. Rotate the mode dial to , , , , or. 2. Press the power switch to turn on the power. 3. Press the four-way controller ( / ) and use ( ) to select [Auto Bracket]. You can also change the setting using the four-way controller ( ). 4. Press the button to confirm the setting. The indicator is displayed on the LCD monitor. 5. Press the shutter release button to capture the three images. The first frame is underexposed, the second frame is exposed with no compensation, and the third is overexposed.

Drive Mode Auto Bracket

In Auto Bracket mode, the flash mode will be set to Flash Off automatically.

Self-Timer

The self-timer can be used in situations such as group shots. When using this option, you should either mount the camera on a tripod (recommended) or rest it on a flat, level surface. Secure the camera to a tripod or place it on a stable surface. Rotate the mode dial to , , , , or. Press the power switch to turn on the power. Press the four-way controller ( / ) and use ( ) to select your desired self-timer mode. You can also change the setting using four-way controller ( ). 5. Press the button to confirm the setting. 6. Compose your scene and press the shutter release button. The self-timer function is activated. The photograph is then taken after the preset time. To cancel the self-timer at any time, press the four-way controller ( / ) or press the shutter release button halfway. 1. 2. 3. 4.

Drive Mode 2 sec. Self-timer
The camera has three self-timer modes as below. Self-timer mode 2 sec. Self-timer 10 sec. Self-timer Description The image is captured about 2 seconds after the shutter is pressed. This mode is useful for preventing camera shake. The image is captured about 10 seconds after the shutter is pressed. This mode is suitable for the shots in which the photographer has to be included.
10+2 sec. Self-timer The first image is captured about 10 seconds after the shutter release button is pressed, and then the second image is captured 2 seconds later. This mode is convenient when capturing group images in succession. Flash does not discharge in this mode.
After one shot is taken, the self-timer mode is turned off. If you wish to take another image using the self-timer, repeat these steps.
Adjusting the Exposure (EV Compensation)
You can manually adjust the exposure determined by the digital camera. Use this mode when the proper exposure cannot be obtained, for example, when the contrast (difference between bright and dark areas) between the subject and the background is extremely high. The EV compensation value can be set in the range from -2.0EV to +2.0EV. 1. Rotate the mode dial to , , , or. 2. Press the power switch to turn on the power. 3. Press the four-way controller ( / ) and use ( compensation value from -2.0EV to +2.0EV. 4. Press the button to confirm the setting.

) to set the EV

EV 0.0 Select : OK :

Setting White Balance

This feature lets you make adjustments to compensate for different lighting types according to your shooting conditions. 1. 2. 3. 4. Rotate the mode dial to , , , or. Press the power switch to turn on the power. Press the MENU button. [Menu1] is displayed. Use the four-way controller ( ) to select [White Balance], then press the button. 5. Use the four-way controller ( ) to select the desired white balance setting, then press the button to confirm. 6. To cancel the setting, press the MENU button and exit the menu.
Recorded Pixels Quality Level White Balance Sensitivity Exit : Select : White Balance Auto Daylight Cloudy Tungsten Light Cancel : Select : White Balance Fluorescent Light

Cancel :

Select :

Recording Movie Clips

This mode allows you to record movie clips with sound via built-in microphone. 1. Rotate the mode dial to and turn your camera on by pressing the power switch. 2. Press the shutter release button to start recording. 3. To stop recording, press the shutter release button again.
The optical zoom function (3X) can be activated before you start recording the movie clips The digital zoom function can be activated before and during the recording.
PLAYING BACK AND DELETING IMAGES

Viewing Images

Delete This Image All Images
Delete OK Cancel Select :
Protected images cannot be deleted with the delete function.
Protecting Images/Movie Clips
Set the data to read-only to prevent images from being deleted by mistake. 1. Press the button. The last recorded image appears on the LCD monitor. 2. Use the four-way controller ( ) to select the desired images. To view the previous image, press the four-way controller ( ). To view the next image, press the four-way controller ( ). 3. Press the MENU button, then use the four-way controller( ) to select [Protect] and press the button. ) to choose the desired setting, 4. Use the four-way controller ( then press the button. [This Image]: Protect one image/movie. [All Images]: Protect all images/movies (at once).
Exit : Protect This Image All Images
5. Use the four-way controller ( ) to select [Protect], then press the button to confirm. Press the MENU button to return to the mode. The indicator appears on the selected image. If you wish to cancel the protect function of a protected image, select [Unprotect].
This Image Protect Unprotect
Even protected images and movies will be deleted by formatting the SD Memory Card or the built-in memory.
Playing Back Still Images/Movie Clips on TV
You can also playback your images on a TV screen. Before connecting to any device, make sure to select NTSC/PAL system to match the video output system of the video equipment you are going to connect to the digital camera, then turn off all devices to be connected. 1. Connect one end of the video cable to the PC/VIDEO terminal of the digital camera, making sure the shapes of both terminals match each other. 2. Connect the other end to the video input socket of the TV set. 3. Turn the TV and digital camera on. 4. Playback the images/movie clips. The method of operation is the same as playing back still images and movie clips on the digital camera.

PC/VIDEO terminal

The sound recorded with movie clips can only be played back on a computer.
EDITING AND PRINTING IMAGES
Changing Image Resolution and Quality
You can change the image resolution and quality of a captured image. 1. Press the button. The last recorded image appears on the LCD monitor. 2. Use the four-way controller ( ) to select the desired image. To view the previous image, press the four-way controller ( ). To view the next image, press the four-way controller ( ). 3. Press the MENU button to access the Playback menu. Press the four-way controller ( ) to select [Playback2] and press ( ) to select [Resize] and press the button. 4. Use the four-way controller ( ) to select the desired setting, then press the button to confirm. 5. To change the image quality, select [Quality Change] in the step 3 above and select the desired setting in the step 4 and press the button to confirm.

DPOF settings can be made only for the images stored on an SD Memory Card. Before you perform the DPOF settings on your camera, always remember to copy your images from the internal memory to an SD Memory Card first. The print icon will appear on the LCD monitor indicating images selected for printing. You cannot print movies. Depending on the printer or printing equipment at the photo processing lab., the date may not be imprinted on the pictures even if the DPOF settings are made.
DPOF This Image All Images Reset All
Connecting to a PictBridge-Compatible Printer
Even if you do not have a computer, you can connect the camera directly to a printer that supports PictBridge to perform image selection and printing using the camera screen and controls. DPOF support also lets you specify which images you want to print and how many copies of each should be printed. Connecting the camera to the printer 1. Rotate the mode dial to and turn your camera on by pressing the power switch. 2. Press the four-way controller ( ) to select the [Set-up2] menu, then use the four-way controller ( ) to select [USB Con.]. Press the button. ) to select [PictBridge], then press 3. Use the four-way controller ( the button. 4. Connect your camera and the printer via a supplied USB cable. The message Data being processed will appear on the on the LCD monitor.
USB Connection PC PictBridge
On Windows 98/98SE/ME/2000, if the camera is connected to your computer and you unintentionally set the camera's USB connection to PictBridge, the "Install Driver" message will appear. Ignore this message and click "Cancel".
Printing images When the camera is properly connected to a PictBridge-compatible printer, the [Select Printing Mode] screen is displayed on the LCD monitor. Use the four-way controller ( ) to select the print mode. In [Print] Mode: Lets you print the specified image with PictBridge. 1. Use the four-way controller ( the button. ) to select the [Print] mode, then press
Select Printing Mode Print Print All DPOF AUTOPRINT
2. Use the four-way controller ( ) to select the image you want to print, then press the four-way controller ( ) to set more detailed settings.

100-0008

Select : Cancel :
Print : Setting : Print Setting
3. Use the four-way controller ( ) to select as your preference, then press the button. [Copies]: Specifies the number of prints. You can select the number up to 10. [Date]: If you select [With], images are printed with the date. [File Name]: If you select [With], images are printed with the file name.

Copies Date File Name

1 Without Without
4. After Print Setting is set, the print icon is marked on the displayed image. You can still use the four-way controller ( ) to change the image by your preference, then press the button.
Print : Setting : Paper Setting
5. Use the four-way controller ( ) to access the paper selection setting, then press the button to confirm. [Paper Size]: You may select the desired item depending on the type of printer being used. [Border status]: You may select the desired item depending on the type of printer being used. 6. This starts printing and displays the message Printing now on the LCD monitor. The message will disappear after the printing is finished. Then the screen returns to [Select Printing Mode]. To cancel printing: button during print data transfer displays the screen Pressing the for selecting whether to [Continue] or [Cancel] printing.

Paper Size Border Status

Standard Standard

Total 3 Cancel : Print :

Printing now 1/3 Cancel : Print Continue Cancel
In [Print All] Mode: Lets you print all images with PictBridge. 1. If you wish to print all the images stored in the camera, you may choose [Print All] in [Select Printing Mode]. 2. To set Print Settings, follow steps 2 to 6 in [Print] Mode.(EN-56)
In [DPOF AUTOPRINT] Mode: This function only lets you print the specified image based on the previously set DPOF settings. 1. If you wish to print images with DPOF setting, you may choose [DPOF AUTOPRINT] in [Select Printing Mode]. 2. To set Print Settings, follow steps 5 to 6 in [Print] Mode.(EN-57)
When connecting a printer which is not compatible with DPOF, [DPOF AUTOPRINT] cannot be selected.
TRANSFERRING FILES FROM YOUR DIGITAL CAMERA TO COMPUTER
For transferring files to PC, you can use either the provided USB cable or a card reader. When using the USB cable, installing the supplied USB driver is necessary for Windows 98/98SE users.
Step 1: Install the USB driver
Installation on Windows 98 & 98SE The USB driver on the supplied CD-ROM (S-SW60) is exclusively for Windows 98 and 98SE. Windows 2000/ ME/XP users don't need to install the USB driver. 1. Insert the enclosed CD-ROM (S-SW60) into your CD-ROM drive. 2. With your camera turned off, connect it to your PC with the USB cable and then turn it on. 3. The "Add New Hardware Wizard" will appear on screen as shown on the right. Click on "Next".
4. Select "Search for the best driver for your device". Click on "Next".
5. Select "CD-ROM drive" and "Specify a location" as shown on the right. Click on "Next". Follow the on-screen instructions to complete the installation. 6. After the USB driver has been installed, restart your computer. About Windows ME/2000/XP and Mac OS 9.2 or higher For Windows ME/2000/XP and Mac OS 9.2 or higher, the computer will automatically recognize the digital camera and load its own USB drivers.
Step 2: Connect the digital camera to your computer
1. Rotate the mode dial to and turn your camera on by pressing the power switch. 2. Press the four-way controller ( ) to select the [Set-up2] menu, then use the four-way controller ( ) to select [USB Con.]. 3. Press the button.
Set-up1 Set-up2 Set-up3 PC PAL USB Con. Video Out Brightness Auto Power Off 2min. Select :
4. Use the four-way controller ( ) to select [PC], then press the button. 5. Turn off your camera.
6. Connect your camera and the computer via the supplied USB cable, making sure the shapes of input and output terminals match each other. 7. Turn your camera on by pressing the power switch. 8. There will be a new Removable Disk icon detected in My Computer, which contains your recorded images or movie clips. (For Mac users, double-click "Untitled" disk drive icon on your desktop.)

Protect

Playback2 Item Resize Functional Description Changes the size of a recorded image. Resizing replaces the original image with the changed image. Only resizing to a smaller size is available. Refer to the section in this manual titled Changing Image Resolution and Quality (EN-51) for further details. 2304x1728 1600x1200 640x480
Quality Change Changes the quality (compression rate) of a recorded image. Compresses images and overwrites an old size images with a newly compressed image. Only quality changing to a lower quality level is available. Refer to the section in this manual titled Changing Image Resolution and Quality (EN-51) for further details. Better Good Image Copy Allows you to copy your files from the digital cameras internal memory to an SD Memory Card. You can only do this if you have an SD Memory Card installed and some files in internal memory. Refer to the section in this manual titled Copying Files (EN-52) for further details.

Setup Menu

This feature allows you to change the default settings to your preferences for using your camera.
Set-up1 Format Sound Date Adjust Language Off d/m/y English Set-up2 Set-up3 Set-up1 Set-up2 Set-up3 PC PAL Set-up1 Set-up2 Set-up3
USB Con. Video Out Brightness Auto Power Off

Reset No. Reset Version

Rotate the mode dial to mode and turn your camera on. Press the four-way controller ( ) to select the [Set-up1] / [Set-up2] / [Set-up3] menu. Use the four-way controller ( ) to select the desired option item, then press the button. Press the four-way controller ( ) to select the desired setting, then press the button. To exit the setup menu, rotate the mode dial to another mode.
Set-up1 settings Item Format Functional Description Deletes all images and reformats the SD Memory Card loaded in your camera. Protected images are also deleted. SD Memory Card cannot be formatted if it is write-protected. Refer to the section in this manual titled Formatting an SD Memory Card or Internal Memory (EN-27) for further details. This sets whether or not to mute the camera sound each time you press a camera button. Loud / Soft / Off This sets the date and the time. Refer to the section in this manual titled Setting the Date and Time (EN-26) for further details. d/m/y m/d/y y/m/d Sets the language that is displayed on the LCD monitor. Refer to the section in this manual titled Choosing the Screen Language (EN-25) for further details. English/ Franais / Espaol / Deutsch / Italiano / Svenska / Nederlands / / Portugus / /

Date Adjust

Language
Set-up2 settings Item USB Con. Functional Description Used to choose one of the following modes for further settings.Refer to the section in this manual titled Connecting to a PictBridge-Compatible Printer (EN-55) and Step 2 in TRANSFERRING FILES FROM YOUR DIGITAL CAMERA TO COMPUTER (EN-60) for further details. PC / PictBridge Sets video output of the camera to match the video output system of the equipment that you are going to connect to the camera. PAL / NTSC This sets the brightness of the LCD monitor. The adjustment range is from -5 to +5.

Video Out

Brightness
Auto Power Off If no operation is performed for a specific period of time, the power to the camera is automatically turned off. This feature is useful to reduce battery wear. The Auto Power Off function will not work when the USB cable is connected. 2 min. / 3 min. / 5 min. / Off
Set-up3 settings Item Reset No. Functional Description Sets whether or not to reset the file number when you take photographs. This creates a new folder. The captured images are recorded to the newly created folder from number 0001. Returns all basic settings to the digital camera's default settings. Date Adjust, Language and Video Out setting will not be reset. This displays the current firmware version of the camera.

Version

CONNECTING THE DIGITAL CAMERA TO OTHER DEVICES
VIDEO CABLE audio-video equipment
USB CABLE PC SD Card Reader SD Memory Card PCMCIA Adapter USB CABLE (PictBridge Function) Printer

SPECIFICATIONS

Item Image Sensor Effective pixels Image size Image quality Recording media File format Lens Focus range Description CCD 6.0 Mega pixels Still image: 2816x 2112, 2304 x 1728, 1600 x 1200, 640 x 480 Movie clip: 320 x 240 Still image: Best, Better, Good Movie image: Good Approx. 13MB internal memory SD Memory Card JPEG (Exif 2.2), DCF, Motion JPEG (AVI) F-no.: Wide-angle: 2.8 / Telephoto: 4.8 Focal length: 5.5mm-16.5mm (Equivalent to 35mm Camera: 34~102 mm) Normal: 0.4m to infinity Macro :0.06m to infinity (Wide-angle) :0.35m to infinity (Telephoto) Wide-angle: Approx. 0.5 m - Approx.3.4 m (at the standard output sensitivity of 200) Telephoto: Approx. 0.5 m - Approx. 2.0 m (at the standard output sensitivity of 200) 2.4 TFT color LCD Approx. 112,000 pixels display

 

Tags

KD-G632 Prism DX6340 MP550 Zoom 115 VR 764 R-S55L AVH-P6500DVD Motorola I833 1100A AT-2005 MP-FUB26 Classic Driver Doro 540R Server ESF 2410 SGH-E620 MG100FX IC-V100 FS1116MFP-FAX Legend HCX LX710 TX-SR506 Makita 1902 CP-70B W268R Dimage X50 5500Z 706-AVR Commerciale 11 LE40C530f1W KX-TG7301FX CS-53P ZBB3294 TA1050 LG WD- 27LZ5RV PCG-F400 TX-901 DMR-E85HEB MS-7510 Digital Camera SAP DB Ag 14 Gx1008B DTB-9401F Interface C4000 PHL 1300 Button KX-T3155 KD-LH811 Privileg 8020 Yamaha F90 UE-22C4000PW MK II Seiko 4206 Powerset DUO VOX EMP-TW600 Lightweight TLP 780 P3600 Tracker 1998 32LG5000 AEU B2240W NE-2156 S5 1M HP2600 G1000 BCM645 VGN-BZ11EN LV700 DC311 5900PRO MF-JM53s8K Mgbsx1 TH-C46fd18A Satellite L45 PCM-R500 LP-1500C 2043NWX GT152D R-207 DLA-SX21 FE-150 SC-AK18 LH-D6235A XR-C8100RW DS410J BC200XLT 11CP BV7960T Design 3 Tourer Easyshare C330 SP5700 Env06 Z1020C AR-151 Comfort

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101