Reviews & Opinions
Independent and trusted. Read before buy Pentax Optio S!

Pentax Optio S

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Pentax Optio S Digital Camera, size: 1.7 MB
Related manuals
Pentax Optio S40
Pentax Optio S6
Pentax Optio S60 Operating Manual
Pentax Optio S50
Pentax Optio S30

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Pentax Optio SPatriot SD-2GB-2094 2GB SD Flash Memory Card for - Pentax Optio S Series SVI Digital Camera


Details
Brand: Patriot
Part Number: SD-2GB-2094


Here you can find all about Pentax Optio S, for example manual and review. You can also write a review.

 

[ Report abuse or wrong photo | Share your Pentax Optio S photo ]

Video review

Pentax optio W90 hd video

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
dan13ro 11:04am on Friday, June 18th, 2010 
I bought this camera to have a small ready-to-shoot camera in my pocket all the time and, boy, this fits the bill. I have had this camera for over a year and it has been wonderful.
Lee_M. 11:03am on Monday, May 10th, 2010 
This is the first digital camera I personally had, it is a good solid built camera. compact, lightweight, easy to use. This was the first digital camera I bought and still my favourite of all the other brands. Extremly light. Very easy to use.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

4 Taking Pictures

This chapter explains the various ways of capturing images and how to set the relevant functions, including how to use the virtual mode dial to change the shooting mode and how to select the Picture mode best suited to the shooting scene.

5 Recording and Playback

This chapter explains how to record sound only or add a voice memo to an image, and how to play back voice memos.
6 Playback/Erasing/Editing
This chapter explains how to play back images on the camera or on a TV and how to delete images.

7 Settings

This chapter explains how to set the camera-related functions.

8 Appendix

This tells you about the messages displayed on the LCD monitor and what to do in the event of trouble. The meanings of the symbols used in this Operating manual are explained below.
indicates the reference page number for an explanation of the related operation. indicates information that is useful to know. indicates precautions to be taken when operating the camera.
A, Picture Mode, The icons above the title show the Capture modes, that can B, C, F, G, activate the function. D, E
Checking the Contents of the Package

Camera Optio S4

Strap O-ST5 ()

Software (CD-ROM) S-SW14

AV cable I-AVC7 ()

USB cable I-USB7 ()

3D Image Viewer O-3DV1
Rechargeable Lithium-ion battery D-LI8 ()

Battery charger D-BC8 ()

Operating Manual this manual
Operating Manual (PC Connection Manual) About items marked with () Items marked with () are also available as optional accessories. For other optional accessories, refer to the list on page 111.
Type of AC plug cord D-CO2A Australia / D-CO2B United Kingdom / D-CO2E Europe / DCO2H Hong Kong / D-CO2J Japan / D-CO2K Korea / D-CO2U North America, Canada

Names of Parts

Power switch Remote control receiver Shutter release button Built-in flash
Lens Self-timer lamp DC input terminal Microphone Strap lug PC/AV terminal Terminal cover

Viewfinder LCD monitor

Battery/Card cover Tripod socket

Names of Operating Parts

Focus status lamp (green) Flash status lamp (red)
b/i button q/s/z/Z button
Shutter release button Power switch Zoom w/x f/y button Four-way controller (OK button in the center) Speaker

Q Playback button

To remove the battery, release the battery by using your finger to press the battery lock lever in the same direction as when you inserted the battery, and pull the battery out. If you intend to use the camera continuously for a long period, use of the AC adapter D-AC8 (optional) is recommended. (1 p.15) Do not remove the battery when the camera is turned on. If you do not intend to use the camera for a long time, remove the battery. If the camera is left without the battery for a long time, the date setting will be reset. Insert the battery correctly. If the battery is incorrectly oriented, it may cause malfunction. Do not twist the battery/card cover more than is necessary when it is open. Doing so may damage the cover.
Approximate Operating Time (when the D-LI8 battery is fully charged) Number of recordable images : Approx. 180 (when 50% shooting uses flash, LCD monitor ON) Playback time : Approx. 110 min.
The description above is based on Pentax measuring conditions and may vary depending on capture mode and shooting conditions.
Generally, battery performance is temporarily deteriorate as temperature decreases. When the camera is used in a cold environment, keep this product warm by holding it in some protection against cold or inside the clothes. Battery performance once deteriorated due to low temperature will be recovered when the batteries are returned to room temperature. Be sure to take a spare battery with you when travelling abroad or to a cold region or if you intend to take a lot of pictures.
Battery Level Indicator You can check the battery level by the monitor.

(lit green)

symbol displayed on the LCD
: Adequate power remains. : Battery is running low. : Battery is running very low. : Battery is exhausted. : After the message is displayed, the camera will turn off.

(lit yellow)

(lit red)

[Battery Depleted]

AC adapter
Using the AC Adapter (optional)
If you intend to use the LCD monitor for a long time or connect the camera to a PC, use of the AC adapter D-AC8 (optional) is recommended.
Make sure that the camera is turned off and open the terminal cover. Connect the DC terminal on the AC adapter to the DC input terminal on the camera, being sure to match the 4 symbols. Connect the AC plug cord to the AC adapter. Plug the AC plug cord into the power outlet.
Make sure that the camera is turned off when connecting or disconnecting the AC adapter. Make sure that the AC plug cord and connecting cord are inserted securely. If the cord becomes disconnected while you are taking pictures, the data may be lost. When using the AC adapter D-AC8, be sure to read the operation manual accompanying the AC adapter. When connecting the DC terminals, be sure to match the 4 symbols. Inserting the plugs with too much force may damage them.

Installing the SD Memory Card / MultiMediaCard
SD Memory Card / MultiMediaCard Battery/Card cover To remove the card, push and pull out
This camera uses an SD Memory Card and MultiMediaCard. Captured images are recorded on the SD Memory Card / MultiMediaCard if a card is inserted ( icon on the LCD monitor), or in the Built-in memory if no card is inserted ( icon on the LCD monitor). Make sure that the camera is turned off before inserting or removing the SD Memory Card / MultiMediaCard.
Open the battery/card cover. Insert SD Memory Card / MultiMediaCard so the label (the side with the 2 symbol) is facing toward the LCD monitor and push the card in until it clicks. Close the battery/card cover.
To remove the card, eject the card by pressing it in the direction indicated by the arrow and pull it out.
Approximate Number of Recordable Images and Recorded pixels/ Quality levels
Quality Level Recorded Pixels

Better

Movie images (320 240)

62 119

640 480

60 sec 1

The above table indicates the number of images when using a 16MB SD Memory Card. The above table is based on standard shooting conditions specified by PENTAX and may vary depending on the subject, shooting conditions, capture mode, SD Memory Card, etc.

Data Backup

Very occasionally, data stored in the Built-in memory becomes unreadable. As a backup measure, we recommend that you download important data to a PC or store the data in a media other than the Built-in memory.
Precautions When Using a SD Memory Card / MultiMediaCard
Make sure that the camera is turned off before opening the battery/Card cover. The SD Memory Card / MultiMediaCard is equipped with Write-protect switch a write-protect switch. Setting the switch to [LOCK] protects the existing data by prohibiting recording of new data, deletion of existing data or formatting of the card.
Care should be taken if you remove the SD Memory Card / MultiMediaCard immediately after using the camera, as the card may be hot. Do not remove the SD Memory Card / MultiMediaCard or turn the camera off while data is being recorded on the card or transferred to PC using USB cable as this may cause the data to be lost or the card to be damaged. Do not bend the SD Memory Card / MultiMediaCard or subject it to violent impact. Keep it away from water and store away from high temperature. Be sure to format unused SD Memory Card / MultiMediaCard or SD Memory Card / MultiMediaCard that have been used on another camera. Refer to Formatting a SD Memory Card / MultiMediaCard and the Built-in memory (p.96) for instructions on formatting. Never remove the SD Memory Card / MultiMediaCard during formatting as this may cause the card to be damaged and become unusable. The data on the SD Memory Card / MultiMediaCard may be erased in the following circumstances. Pentax does not accept any liability for data that is erased when the SD Memory Card / MultiMediaCard is mishandled by the user. when the SD Memory Card / MultiMediaCard is exposed to atic electricity or electrical interference. when the card has not been used for a long time. when the card is ejected, the AC adapter is disconnected or the battery is removed while the data on the card is being accessed. The SD Memory Card / MultiMediaCard has a limited service life. If it is not used for a long time, the data on the card may become unreadable. Be sure to make a backup of important data on a PC. Avoid using or storing the card where it may be exposed to static electricity or electrical interference. Avoid using or storing the card in direct sunlight or where it may be exposed to rapid changes in temperature or to condensation. 17

The display cannot be turned off in C, G, F and D mode.
Saving the Display Mode 1 p.74

2048 AWB AUTO

10/20/2003 11:19

Display On

B F GDE
Selecting the Recorded Pixels
You can choose the number of recorded pixels from [23041728], [16001200], [1024768] and [640480].

1024768 640480

Suited for printing on A4 paper (8 1/2 11) Suited for printing on A5 paper Suited for printing on postcards Suited for attaching to E-mails or for creating websites
Select [Recorded Pixels] on the [A Rec. Mode] menu. Use the four-way controller (45) to change the size. Press the OK button.
The camera is ready to take the picture.
The recorded pixels is fixed at 320240 pixels in the movie picture mode. If you select a large size, the picture may appear distinct when it is printed out.
Selecting the Quality Levels
You can choose the image compression rate. The more stars, the clearer the quality and the larger the volume. The recorded pixels setting also changes the picture volume.
C D E Best Better Good Lowest compression ratio. Suited for photo prints. Standard compression ratio. Suited for viewing the image on a computer screen. Highest compression ratio. Suited for attaching to emails or creating webpages.
Select [Quality Level] on the [A Rec. Mode] menu. Use the four-way controller (45) to select the size. Press the OK button.

2, 1 A

B C F GDE
Adjusting the Color Balance according to Lighting (White Balance)
You can take pictures in natural colors by adjusting the white balance according to the light conditions at the time of shooting.
F G H I J K Auto Daylight Shade The camera adjusts the white balance automatically. Use this mode when taking pictures outside in sunlight. Use this mode when taking pictures outside in the shade. Use this mode when taking pictures under electric or other Tungsten Light tungsten light. Fluorescent Use this mode when taking pictures under fluorescent light. Light Use this mode when taking pictures by adjusting the white Manual balance manually.
Select [White Balance] on the [A Rec. Mode] menu. Press the four-way controller (5).
The white balance screen will be displayed.

White Balance

Use the four-way controller (45) to select the setting. Press the OK button twice.
Saving the White Balance 1 p.74

Manual Setting

Select [K] (manual) on the [White Balance] screen. Point your camera at a blank sheet of paper so that it fills the screen. Press the Display button.

DISPLAY Adjust

The white balance is automatically adjusted, [Adjust] is displayed on the LCD monitor and the display returns to the menu screen.
Changing the AF Area (Focusing Area)

You can change the autofocus area.
Multiple Normal range Spot
The autofocus range becomes smaller. (Spot)
Select [Focusing Area] on the [A Rec. Mode] menu. Use the four-way controller (45) to change the setting. Press the OK button.
The AF area does not appear in the viewfinder. Always check the focusing area on the LCD monitor.
Saving the Focusing Area Setting 1 p.74
Setting the Light Metering Range to Determine the Exposure (AE Metering)
You can choose which part of the screen to use to measure the brightness and determine the exposure.
L M N Multi-segment Center-weighted Spot The exposure is determined by the entire screen. The exposure is determined mainly by the center of the screen. The exposure is determined by the small area in the center of the screen only.
Select [AE Metering] on the [A Rec. Mode] menu. Use the four-way controller (45) to change the metering mode. Press the OK button.
When N is selected, the metering point moves in correspondence with movement of the focusing area.
Saving the AE Metering Method 1 p.74

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings. Sensitivity

AUTO 200

The camera sets the sensitivity automatically.
The lower the sensitivity, the sharper the image and the less noise. The shutter speed will be slower in low light conditions. The higher the sensitivity, the faster the shutter speed in low light conditions to reduce camera shake, but the image may be affected by noise.
Select [Sensitivity] on the [A Rec. Mode] menu. Use the four-way controller (45) to select the sensitivity. Press the OK button.
Saving the Sensitivity 1 p.74
Setting the Instant Review time (Instant Review)
You can choose the Instant Review time from 0.5sec., 1sec., 2sec., 3sec., 4sec., 5sec. or off (no display).
Select [Instant Review] on the [A Rec. Mode] menu. Use the four-way controller (45) to select the display time. Press the OK button.
On 2sec Off Parallel Mode
The Instant Review setting is saved when the camera is turned off.
Setting the Image Sharpness (Sharpness)
You can choose whether you want the image to have sharp or soft outlines. 4 Taking Pictures
Select [Sharpness] on the [A Rec. Mode] menu. Use the four-way controller (45) to change the setting from [Normal] to [Hard (+)] or [Soft ()]. Press the OK button.

Press the MENU button in Movie Picture mode.
Press the four-way controller (3) to select [Fast Fwd Movie]. Use the four-way controller (45) to choose [Off (1)], [2], [5], [10], [20], [50] or [100]. Press the OK button. Press the shutter release button.
Shooting in Fast Forward Movie mode starts. Off (1) is the normal setting for movie pictures (12 frames per second). Each time 2 or 5 is selected, the number of frames taken per second is reduced to 1/2 or 1/5. As movie pictures are normally played back at the rate of 12 frames per second, movies taken at 2 are played back twice as fast and movies taken at 5 are played back five times as fast. Sound cannot be recorded.
Movie Picture Mode 1 p.56

10/20/2003 11:30sec x2

Saving the Settings (Memory)
Saving the Menu Items (Memory)
You can choose whether you want the set values to be saved when the camera is turned off. If you select O [On], the settings will be saved in the status they were in immediately before the camera was turned off. If you select P [Off], the settings will be reset to the defaults when the camera is turned off.
Item Description Default Setting
White Balance EV compensation Digital Zoom AE Metering Sensitivity Focus Mode Zoom Position MF DISPLAY File #
The flash mode setting on the # button is saved. The [White Balance] setting on the [Rec.Mode] menu is saved. The set EV compensation value is saved. The [Digital Zoom] setting on the [Rec.Mode] menu is saved. The [AE Metering] setting on the [Rec.Mode] menu is saved. The [Sensitivity] setting on the [Rec.Mode] menu is saved. The focus mode setting is saved. The zoom position setting is saved. The manual focus position is saved. The LCD monitor display mode is saved. The file number is saved. If a new SD Memory Card/ MultiMediaCard is inserted,the sequential file number is assigned.

O P P O P P P P P O

Menu items not included in [Memory] will also be saved in the settings selected on the menus for each function when the camera is turned off. The zoom position setting in the digital zoom range will not be saved even if [Zoom Position] is set to On in [Memory]. [Memory] can be set separately in User mode and other shooting modes.
Press the MENU button in Capture mode. Press the four-way controller (23) to select [Memory]. Press the four-way controller (5).
[Memory] menu will be displayed.
Use the four-way controller (23) to select the item. Press the four-way controller (45) to select O [On] or P [Off]. Press the OK button twice.
Register Functions in User Mode
Functions set with the Capture Mode on User will be registered in User mode. Functions registered in User mode

Editing Images

Four-way controller OK button Menu button

Changing the Image Size

By changing the size and quality of a selected image, you can make the file smaller than the original. After changing the size, the image can be saved as a new image or written over the original image.
Press the MENU button. Press the four-way controller (5).
Press the four-way controller (23) to select [Resize]. Press the four-way controller (5).
The Resize screen will be displayed.
Use the four-way controller (45) to choose the image to resize. Press the OK button.
Press the four-way controller (45) to select [Recorded pixels]. Press the four-way controller (3).
The select frame moves to [Quality Level].
Select resolution and quality Recorded Pixels Quality Level
Press the four-way controller (45) to select [Quality Level]. Press the OK button. Press the four-way controller (23) to select [Overwrite] or [Save as]. Press the OK button.
The image will be resized.
Movie pictures cannot be resized. You cannot select a larger size than that of the original image.

Trimming Images

You can trim part of a picture and save it as a separate image.
Press the four-way controller (23) to select [Trimming]. Press the four-way controller (5).
The image that can be trimmed.
Choose the image you want to trim with the four-way controller (45). Press the OK button.
The trimming screen will be displayed.

Trim the image.

Operations available on the Trimming screen. Zoom/f/y button: Changes the size of the image Four-way controller (2345): Moves the trimming position up, down, right and left MENU button: Returns to the screen for selecting an image to trim
The trimmed image will be saved as a separate image with same quality level and recorded pixels of the original image. Movie pictures cannot be trimmed.

Copying Files

You can copy files from the Built-in memory to the SD Memory Card/ MultiMediaCard and vice versa. When files are copied from the Built-in memory to the card, all the files are copied at once. When files are copied from the card to the Built-in memory, the files are checked one at a time before being copied.
The [Q Playback] menu is displayed.
Press the four-way controller (3) to select [Copy Image & Sound]. Press the four-way controller (5).
The File Copy screen is displayed. Choose the copying method you want to use.
To copy from the Built-in memory to the SD Memory Card / MultiMediaCard
Select the copying method.
Select and press the OK button. All the files will be copied to the SD Memory Card / MultiMediaCard.

Copy image & sound

SD Cancel
To copy from the SD Memory Card / MultiMediaCard to the Built-in memory

Select

to select the file you want to copy. Press the OK button.

Changing the Start-up Screen
You can display an image recorded with the camera as the welcome screen when the camera is turned on.
Select [Start-up Screen] on the [B Set-up] menu. Press the four-way controller (5). Press the Display button. Use the four-way controller (45) to choose the image you want to display as the start-up screen. Press the OK button. Use the four-way controller (45) to select O [On] or P [Off]. Press the OK button twice.
The camera is ready to take or play back images. Once the welcome screen has been set, it will not be erased even if the original image is deleted or the SD Memory Card / MultiMediaCard is formatted.

Setting the Date Style

You can set the style in which the date is displayed on the camera. Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd].
Select [Date Style] on the [B Set-up] menu. Use the four-way controller (45) to change the date style. Press the OK button.
The camera is ready to capture or play back images with the selected date style. The style in which the time is displayed is set by [Date Adjust].

Changing the Date/Time

You can change the initial date and time settings.
Select [Date Adjust] on the [B Set-up] menu. Press the four-way controller (5).
The date screen will be displayed.
See Setting the Date and Time (p.20) for the setting procedure.

Setting the World Time

The city and time selected in Initial Settings (p.18) serve as the Home Time setting. You can display the time in a city other than the Home Time city (World Time) when shooting or playing back.
Select [World Time] on the [B Set-up] menu. Press the four-way controller (5).
The World Time screen will be displayed.

World Time

City DST City DST

18:52 TYO 18:52

Switch [O] and [P] with the four-way controller (45).
O : The time in the country selected in World Time will be displayed. P : The time in the country selected in Home Time will be dis-played.
If New York is selected as the world time city, then the cross-shapes line is located in New York on the world map, and then X indicates the current time in New York (NYC).
Use the four-way controller (45) to select the World Time city and press the four-way controller (3).
45 on the LCD monitor will move to (Z).
Select [DST] On (Y) or Off (Z) with the four-way controller (45) and press the four-way controller (3).
The frame will move to [W] (home time city). Use the four-way controller (45) to change the Home Time city and DST setting.
Press the OK button twice.
The camera is ready to capture or play back images with the time in the selected city. See p.110 for the list of cities and code names.
Changing the Display Language
You can change the language in which the menus, error messages, etc. are displayed.

The camera is ready to capture or play back images. Only one function can be registered on each key of the four-way controller (45). You can choose from the following 12 functions: Recorded Pixels, Quality Level, White Balance, Focusing Area, AE Metering, Sensitivity, Instant Review, Fast Fwd Movie, Sharpness, Saturation, Contrast and EV Compensation.

Retrieving a function

The function will be recalled.
Resetting to Default Settings (Reset)
You can reset all the settings other than the date and time, language, world time and alarm.
Select [Reset] on the [B Set-up] menu. Press the four-way controller button (5).
The Reset screen will be displayed.
Use the four-way controller (2) to select [Reset]. Press the OK button.

Setting the Alarm

You can set the alarm to ring at a specified time and display a selected image.

Checking the Alarm

Press the four-way controller (23) to select [Alarm]. Press the four-way controller (5).
The list of alarms will be displayed. Active alarms are indicated by O.

Once Everyday Off

5:30 7:30 0:00
If any alarms are enabled, the camera will be turned off and the alarms will be set.
Press the four-way controller (23) to select [Alarm].
The list of alarms will be displayed.
Press the four-way controller (23) to select alarm 1-3. Press the four-way controller (5).
The screen for setting the alarm mode and time will be displayed. Four-way controller (45): Selects the item. Four-way controller (23): Changes the setting.
Press the Display button. Press the four-way controller (45) to select the image to be displayed when the alarm rings. Press the OK button. Press the OK button 3 times.
The camera will turn off.

Turning the Alarm Off

When the camera is turned off and the set time is reached, the alarm will ring for one minute. The camera will turn off automatically when the alarm has finished ringing.
To stop the alarm ringing, press any button. The alarm will not ring when the camera is turned on.

List of City Names

Refer to following list of city and code names for setting the world time.
Code TYO GUM SYD NOU WLG AKL PPG HNL ANC YVR SFO LAX YYC DEN MEX CHI MIA YTO NYC SCL CCS YHZ BUE SAO RIO MAD LON PAR MIL ROM BER City names Tokyo Guam Sydney Noumea Wellington Auckland Pagopago Honolulu Anchorage Vancouver San Francisco Los Angeles Calgary Denver Mexico City Chicago Miami Toronto New York Santiago Caracas Halifax Buenos Aires Sao Paulo Rio de Janeiro Madrid London Paris Milano Rome Berlin Code JNB IST CAI JRS MOW JED THR DXB KHI KBL MLE DEL CMB KTM DAC RGN BKK KUL VTE SIN PNH SGN JKT HKG PER BJS SHA MNL TPE SEL ADL City names Johannesburg Instanbul Cairo Jerusalem Moscow Jeddah Tehran Dubai Karachi Kabul Male Delhi Colombo Kathmandu Dacca Rangoon Bangkok Kuala Lumpur Vientiane Singapore Phnom Penh Ho Chi Minh Jakarta Hong Kong Perth Beijing Shanghai Manila Taipei Seoul Adelaide

8 Appendix

Optional Accessories
A number of dedicated accessories are available for this camera. AC adapter D-AC8 USB Cable I-USB7 AV Cable I-AVC7 Camera Case O-CC8 Strap O-ST5 Remote control E Remote control F Rechargeable lithium-ion battery D-LI8 Battery charger D-BC8

Messages

Messages such as the following may be displayed on the LCD monitor during camera operation.
Memory Card full Built-in Memory Full The SD Memory Card / MultiMediaCard or the Builtin memory is full and no more images can be saved. Insert a new SD Memory Card / MultiMediaCard or delete. (p.16, p.84) Change the quality/size and try again. (p.92, p.94) No image & sound There are no images or sound on the SD Memory Card / MultiMediaCard or in the Built-in memory. Camera can not You are trying to play back an image in a format not display this image & supported by this camera. You may be able to sound. display it on another brand of camera or PC. Battery depleted. The battery is exhausted. Recharge the battery or replace with charged battery. (p.12) Memory card error. Shooting and playback are impossible due to a problem with SD Memory Card / MultiMediaCard. Try displaying on a PC. This card is not The SD Memory Card / MultiMediaCard you have formatted. inserted is unformatted or has been formatted on a PC or other device and is not compatible with this camera. (p.96) Data being recorded. The image is being recorded on the SD Memory Card / MultiMediaCard. The protect setting or DPOF setting is being changed. Formatting. The SD Memory Card / MultiMediaCard or Built-in memory is being formatted.
Deleting Image folder could not be created.
The image is being deleted. The largest file number has been assigned to an image and no more images can be saved. Insert a new SD Memory Card / MultiMediaCard or format the SD Memory Card / MultiMediaCard or Built-in memory. (p.96) Battery depleted, the The battery is exhausted. The image you just image is not stored. captured has not been saved. Recharged the battery or replace with charged battery. Compression error Compression of the image you captured has failed. Change the recorded pixels or quality levels, and take a picture again. Data being recorded The movie picture is being recorded. Protect all images & The image you are trying to delete is a protected sounds image. Alarm was set The alarm has been enabled.

Main Specifications

Type Effective Pixels Sensor Recorded Pixels
Fully automatic compact-type digital still camera with built-in zoom lens 4.0 megapixels 4.23 megapixels (total pixels), 1/2.5 inch interline transfer CCD with a primary color filter Still 23041728 pixels, 16001200 pixels, 1024768 pixels, 640480 pixels
Movie picture 320240 pixels Sensitivity File Format Auto, manual (Equivalent to ISO 50, 100, 200) Still Movie Sound Quality Level Storage Medium JPEG (Exif2.2), DCF, DPOF, PRINT Image Matching II AVI (Open DML Motion JPEG), approx. 15 fps, with sound WAV (ADPCM system), max. recording time 59 min. 46 sec. (when using a 16 MB SD Memory Card)
Best, Better, Good Built-in memory (approx. 11 MB), SD Memory Card / MultiMediaCard (MMC) Best (C) Better (D) Good (E) 60 sec 1 Movie picture (320240)
Image Storage Capacity Quality Level Recorded Pixels 1024768 640480
When using a 16MB SD Memory Card

White Balance Lens

Auto, Daylight, Shade, Tungsten Light, Fluorescent light, Manual Focal Length 5.8 mm 17.4 mm (Equivalent to 35 mm 105 mm in 35 mm format) 6 elements in 5 groups (two aspherical elements) Electrically driven 39.5 mm29.6 mm (screen is filled) (Super Macro mode) Electrically driven Max 4 (Combines with 3 optical zoom to give zoom magnification equivalent to 12) Real-image zoom viewfinder Wide 0.28, Tele 0.78 -1 m-1 (at 3 m)
Maximum Aperture f/2.6 f/4.8 Lens Composition Zoom type Picture Range Lens Barrier Digital Zoom Viewfinder Capture Mode Type Magnification Diopter
LCD monitor Playback Functions Focusing System
1.6 inch TFT color LCD with 84 kilopixels monitor (with backlight) Single-frame, 9-frame index, enlargement (max. 4), scroll, slideshow, movie playback, histogram display, image/sound copying, trimming, resizing Type Focusing Range (From lens front) TTL contrast detection system by sensor 7-point autofocus (Spot autofocus possible) Normal: 0.4 m to infinity (full zoom range) Macro: 0.18 m 0.5 m (full zoom range) Super macro: 0.06 m 0.2 m (middle zoom position only) Landscape: Infinity (full zoom range) By half-pressing shutter release button TTL metering by sensor (multi-segment, centerweighted, spot) Standard, Picture, Night-Scene, Movie, Panorama Assist, 3D, Digital Filter, USER 2EV (Can be set in 1/3EV steps) Recording time approx. 1 sec. 1 min., Fast Fwd Movie: max. approx. 100 min. Electronic/mechanical shutter Approx. 1/2000 sec. - 4 sec. Auto flash with red-eye reduction function Auto, Flash Off, Flash On, Auto + Red-eye Reduction, Flash On + Red-eye Reduction Wide: Approx. 0.2m-3.5m w/sensitivity at 200 Tele: Approx. 0.1m-2.0m w/sensitivity at 200

Focus Lock Manual Focus 0.06 m to infinity Exposure Mechanism AE Metering Shooting Modes EV compensation Movie Shutter Flash Type Speed Type Flash Modes Working Range Drive Modes Self-timer Time function Power Supply Battery Life In/Out Port Video Output format Size Mass Mass when shooting Accessories
Single-frame, Continuous, Remote Control, Self-timer Electronic control type, delay time: approx. 10 sec. World Time setting for 62 cities (28 time zones) Rechargeable lithium-ion battery D-LI8, AC adapter (optional) Approx. 160 images (with LCD monitor on, flash fired for 50% of shots and using a rechargeable lithium-ion battery D-LI8, in accordance with Pentax measuring conditions) USB/AV terminal (PC communication type USB 1.1), external power supply terminal NTSC, PAL 83 (W) 52 (H) 20 (D) mm (excluding operating members and projections) 98g (excluding battery and SD Memory Card / MultiMediaCard) 113g (including battery and SD Memory Card / MultiMediaCard) Rechargeable lithium-ion battery, 3D image viewer, USB cable, software (CD-ROM), AV cable, strap, operating manual

WARRANTY POLICY

All Pentax cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered, and defective parts will be replaced without cost to you within that period, provided the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties, whether expressed or implied, is strictly limited to the replacement of parts as hereinbefore provided. No refunds will be made on repairs by non-authorized Pentax service facilities. Procedure During 12-month Warranty Period Any Pentax which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the equipment or to the manufacturer. If there is no representatives of the manufacturer in your country, send the equipment to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the equipment can be returned to you owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be borne by the owner. If your Pentax was purchased outside of the country where you wish to have it serviced during the warranty period, regular handling and servicing fees may be charged by the manufacturer's representatives in that country. Notwithstanding this, your Pentax returned to the manufacturer will be serviced free of charge according to this procedure and warranty policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer's authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing.

doc1

5 Recording and Playback

This chapter explains how to record sound only or add a voice memo to an image, and how to play back voice memos.
6 Playback/Deleting/Editing
This chapter explains how to play back images on the camera or on a TV, how to delete, resize and trim images, and how to print images directly to the printer.

7 Settings

This chapter explains how to set the camera-related functions.

8 Appendix

This tells you about the messages displayed on the LCD monitor and what to do in the event of trouble.
The meanings of the symbols used in this operating manual are explained below.
indicates the reference page number for an explanation of the related operation. indicates information that is useful to know. indicates precautions to be taken when operating the camera.
Checking the Contents of the Package

Camera Optio S5i

Strap O-ST20 ()

Software (CD-ROM) S-SW25

AV cable I-AVC7 ()

USB cable I-USB7 ()

Rechargeable lithium-ion battery D-LI8 ()
Battery charging stand D-BC25 ()

AC plug cord D-CO2 ()

Operating Manual (this manual)

(PC Connection Manual)

Enjoying Your Digital Camera Images On Your PC
Operating Manual (PC Connection Manual) Items marked with an asterisk () are also available as optional accessories. For other optional accessories, refer to Optional Accessories (p.133). 10

Names of Parts

Power indicator Power switch Remote control receiver Shutter release button Flash
Microphone Lens Self-timer lamp USB/AV terminal Strap lug DC input terminal Terminal cover

Viewfinder

Focus status lamp (green) Flash status lamp (red) LCD monitor
Speaker Battery charging stand terminal Battery/Card cover Tripod socket

Names of Operating Parts

QUICK button b/i button qsz/Z button Shutter release button Power switch
Zoom /f/y button Four-way controller (2345) OK button DISPLAY button
MENU button Q Playback button
Guide Indications A guide to available button operations appears on the LCD monitor during operation. The buttons are indicated as shown below.
Four-way controller (2) Four-way controller (3) Four-way controller (4) Four-way controller (5) MENU button Shutter release button 4 5

SHUTTER

Zoom /f/y button for digital zoom for trimming DISPLAY button i button Z button OK button

Attaching the Strap

1 Getting Started Pass the narrow end of the strap through the strap lug and pass the other end through the loop.

Protects the image displayed on the LCD monitor from deletion. (1p.103)
Press f during normal playback to display nine images at once. (1p.98) Press Zoom/f/y button during zoom playback to change the size of the Zoom Display image displayed on the LCD monitor. (1p.94)

Zoom/f/y button

Switches to Capture mode.

Four-way controller

(2) Sets the DPOF settings for the print service. (1p.106) (45) Displays the previous or next image. (1p.30) (3) Rotates the image. (1p.31)
Selects a menu item. (1p.38) Records or plays back a voice memo. (1p.93)
Changes the information displayed on the LCD monitor. (1p.97)

1 Shutter release button

When pressed, starts recording, and when pressed again, stops recording. When pressed for more than one second, recording continues for as long as the button is held down and stops when the button is released.
Switches to Playback mode. (1p.33) When pressed again, returns to Voice Recording mode.
Four-way controller (in Playback mode)
(2) Starts playback. When pressed again, pauses playback. (45) Performs the following operations during playback. Selects a recorded file before playback. If there are no recorded indexes: When (4) is pressed during playback, rewinds five seconds. When (5) is pressed during playback, advances five seconds. If there are recorded indexes: When (4) is pressed during playback, plays back starting from the previous index. When (5) is pressed during playback, plays back starting from the next index.
Turns the LCD monitor off. When pressed again, turns the LCD monitor on.
When pressed during recording, an index can be added. When pressed during standby or before recording or playing back, displays the [Q Playback] and [B Set-up] menus. (1p.38) 37

Setting the Menus

When you press the MENU button, the menus appear on the LCD monitor. You can set functions, save the settings and change the camera settings on these menus.

How to Set the Menus

When you are making settings from a menu, a guide to operation appears on the LCD monitor.

Press the MENU button.

The [A Rec.Mode] menu appears when you display the menu from Capture mode, and the [Q Playback] menu appears when you display the menu from Playback mode. The selected area appears in a green frame.

Changes the menu screen.

Use the four-way controller (23) to choose an item.
Moves the frame up or down.
Use the four-way controller (45) to change the setting. If there is a select screen, use the four-way controller (5) to move to the select screen.
Press the OK button to return to the menu when you have finished making the settings.
The settings are saved and the screen returns to capture or playback status. If you press any buttons before pressing the OK button to exit the menu, any changes you have made to the settings will not be saved. Even after pressing the OK button to exit the menu, if you turn the camera off incorrectly (such as by removing the battery while the camera is turned on), any changes you have made to the settings will not be saved. The menu is exited automatically one minute after the last operation.

Press the four-way controller (3) in Capture mode.
The Mode Palette appears.
Use the four-way controller (2345) to select R (Program mode). Press the OK button. Set the functions you want to use.

Program

Refer to Setting the Shooting Functions (p.69 to p.88) for details of how to set the functions.

The picture is taken.

4 1, 2 3
Selecting the Picture Mode According to the Shooting Scene (Picture Mode)
You can select the Picture mode according to the shooting scene. There are 11 available modes in Picture mode.
Lets you capture the natural colors of landscape views. Lets you take brightly colored flower pictures. Lets you take portraits with spatial effect, by emphasizing the person. Lets you take pictures of yourself or be included in pictures. Lets you take photos against dazzling backgrounds like L Surf&Snow beaches or snow-covered mountains. N Autumn Colors Lets you take colorful pictures of trees in autumn. Lets you reproduce the beautiful colors of the sunrise or sunset. K Sunset J Museum Lets you take pictures of works of art in museums and galleries. W Text Lets you take clear pictures of text or writing. K Food Lets you take appetizing pictures of prepared food. Lets you take clear pictures of moving subjects with a high Sport shutter speed. H I J S Landscape Flower Portrait Self-portrait
The Mode Palette screen appears.
Use the four-way controller (2345) to choose the desired mode.
For example, select H (Landscape mode).
Press the OK button. Press the shutter release button halfway.

Landscape

Picture mode
In Picture mode, the EV compensation, saturation, contrast, sharpness and white balance are automatically set to their default settings. You can change the settings.
Taking Pictures of Dark Scenes (Night Scene Mode)
You can take pictures of dark scenes, such as nightscapes, with the appropriate settings.
Use the four-way controller (2345) to select B (NightScene mode). Press the OK button. Press the shutter release button halfway.

Night Scene

The picture is taken. Total recording time will be longer when the picture is taken at slower shutter speed, because the noise reduction activates to reduce noise. The shutter speed is slower when taking pictures of dark scenes. To prevent camera shake, secure the camera on a tripod or other surface.
Taking Movies (Movie Mode)
This mode enables you to take movies and sound.
Use the four-way controller (2345) to select C (Movie mode).
The following shooting information appears on the LCD monitor and the camera is ready to take movies. 1 Flash Off icon 2 Movie mode icon 3 Card/Built-in memory 4 Recordable time
Shooting starts. You can change the size of the image using the Zoom button. x : makes the subject bigger. w : makes the subject smaller.

1, 2 3

Taking Soft-Contoured Pictures (Soft Focus Mode)
You can take pictures with a soft lens effect.
Use the four-way controller (2345) to select V (Soft Focus mode).
The picture is taken in Soft Focus mode.

6 1, 2, 4 3, 5

Taking Pictures with Digital Filters (Digital Filter Mode)
The filters consist of color filters such as red, blue and green, a posterization filter that takes posterization-type pictures, and a slim filter that produces a slim effect. The Digital Filter mode enables you to take pictures using these filters. Taking Pictures with the Color Filter
Use the four-way controller (2345) to select D (Digital Filter mode). Press the OK button.
The Filter Options screen appears.

Digital Filter

Use the four-way controller (23) to choose a color filter.
You can choose from eight color filters: black-and-white, sepia, red, pink, violet, blue, green and yellow. You can check the filter effect on the LCD monitor when you choose a color.

B&W

Taking Pictures Using the Posterization filter ( ) Posterization is an effect that uses a limited range of color tones and enables you to take posterization-type pictures.
Use the four-way controller (23) to select (Posterization). Press the OK button. Press the shutter release button halfway.

Posterization

The picture is taken with the Posterization filter.
Taking Pictures with the Slim Filter (O) The screen for setting the slimness level appears when you select the slim filter in Digital Filter mode.
Use the four-way controller (23) to select O (Slim Filter mode). Use the four-way controller (45) to set the slimness.
= : Stretches the image up to twice its size horizontally. : Stretches the image up to twice its size vertically.
The picture is taken with a slim filter effect.
The digital zoom cannot be used when the slim filter is selected.
Using Preset Function Settings (User Mode)

7/18/2004 12:00 12

Move the camera to the right without changing your stance. Take the second image.
Make sure that the subject is in the middle of the right half of the screen and press the shutter release button.
2, 1 Selecting the Viewing Mode
The [A Rec.Mode] menu appears.
Use the four-way controller (23) to select [3D Mode]. Use the four-way controller (45) to select [Parallel] or [Cross].
To view pictures with the 3D image viewer, select [Parallel]. You can view both [Parallel] and [Cross] pictures without the image viewer.
Rec. Mode EV Compensation 0.0 Parallel 3D Mode Time-lapse Movie Off On Digital Zoom Instant Review 1 sec Memory
The camera returns to the Capture Mode screen. To cancel the 3D Image mode, change to another Capture mode. A three-dimensional effect will not be achieved if the subject moves before the second image is taken. When taking a person, you are recommended to ask your model to stay as still as possible and to take the second picture as quickly as you can. It is easier to take the pictures if you use a tripod or appropriate base. As a guide, the camera should be moved about 1/40 of the distance between the camera and the subject. For example, if the subject is 3m away, the distance the camera should be moved will be 3m40=7.5cm. However, as the way people see three-dimensional images differs from person to person, there is no need to be too concerned. Refer to the table below for a simple guide to how far to move the camera.
Distance to subject Camera movement

0.1 m 0.5 cm

0.3 m 1 cm

0.5 m 1.5 cm

1m 2.5 cm

3m 7.5 cm

5m 13 cm
Viewing 3D Pictures by the Parallel Method and Cross Method As our eyes are positioned about 6 cm or 7 cm apart, there is a very slight deviation between what we see with our right eye and what we see with our left eye. The difference is processed by our brain to produce a three-dimensional image. This principle is applied to taking and viewing 3D pictures. 3D pictures can be viewed by the parallel method where the left and right lines of vision are virtually parallel, as when looking at a distant scene, or the cross method where the left and right lines of vision are crossed, as when you cross your eyes. A certain amount of practice may be necessary to view 3D pictures without using the viewer. How to Assemble the 3D Image Viewer Assemble the 3D image viewer (optional) as shown below.

V Soft Focus mode D

p.51 p.52 p.54 p.55

Digital Filter mode

E USER mode M

Marine mode

Selecting the Green Mode
You can switch straight to the Green mode from the Capture mode, Playback mode or menu screens.
You cannot switch to the Green mode using the QUICK button if a different function has been assigned to the QUICK button. (1p.128)
Selecting a Capture Mode other than the Green Mode
Use the four-way controller (2345) to choose the icon for the mode you want to set.
The icon is surrounded by a green frame.
The camera is ready to take pictures in the selected mode.
Displaying Shooting Information in Capture Mode
You can display shooting information on the LCD monitor when taking pictures. The display mode can be changed by pressing the DISPLAY button. Display On 7 Shooting information is displayed when the 2 power is turned on. 1 Flash mode 2 Drive mode 3 Focus mode 4 Capture mode 5 Focus frame 6 Card/Built-in memory 7 Remaining number of recordable images 1/160 7/18/Date and time 9 Battery indicator F2.6 12:Aperture 11 Shutter speed Histogram Display The brightness distribution of the image is 1 displayed. The horizontal axis shows the brightness (darkest at the left end and 2560 brightest at the right end) and the vertical axis AWB shows the number of pixels. 1 Recorded pixels 2 Quality level AUTO 1/White balance 4 AE metering F2.Sensitivity 6 Histogram Display Off No shooting information is displayed. The focus frame appears in Autofocus mode. If any of the modes are changed, such as the flash mode, the mode you have changed appears for a few seconds. LCD Monitor Off The LCD monitor turns off.
The display cannot be turned off in Q, C, G, F or D mode. The histogram cannot be displayed in Q mode.
Saving the Display Mode 1p.89

Display On

Selecting the Focus Mode
Focus mode 4 Taking Pictures

(No icon)

Autofocus mode

Macro mode

Super Macro mode

Pan Focus mode

The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway. Use this mode when the distance to the subject is more than 40 cm (16 in.). This mode is used when the distance to the subject is approx. 18 cm 50 cm (7 in. 20 in.). The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway. This mode is used when the distance to the subject is approx. 6 cm 20 cm (2.4 in. 8 in.). The camera focuses on the object in the autofocus area when the shutter release button is pressed halfway. This mode is used when shooting close and distant subjects together. The camera will focus on a certain place. This mode is used for taking distant objects.

a b c d

The flash discharges automatically depending on the light conditions. The flash will not discharge, regardless of the brightness. Use this mode to take pictures at dusk or in museums etc. where flash photography is prohibited. The flash discharges regardless of the brightness. This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subjects eyes. The flash discharges automatically. This mode reduces the phenomenon of red eyes caused by the light from the flash being reflected in the subjects eyes. The flash will discharge regardless of lighting conditions.
The flash is off when the Capture mode is set to C (Movie mode), N (Marine Movie mode), Continuous Shooting, InfinityLandscape, or Super Macro mode. The flash discharges a total of three times, two pre-flashes and the third time to take the picture. (In the red-eye reduction modes, the interval between the pre-flashes and the main flash is longer.)
Press the b button in Capture mode.
The flash mode changes each time the button is pressed and the icon appears on the LCD monitor. The camera is ready to take pictures in the selected flash mode.
Status of the Focus Status Lamp and Flash Status Lamp 1p.29 Saving the Flash Mode 1p.89
Using the flash in Macro mode may cause the image to be overexposed.
Selecting the Recorded Pixels
You can choose the number of recorded pixels from [25601920], [20481536], [16001200], [1024768] and [640480]. The more pixels there are, the larger the picture and the bigger the file size. The data volume also varies depending on the quality level setting (1p.78). Number of Recorded Pixels

1024768 640480

Clear, Fine

20481536

Printing images with high-resolution settings in your printer, Printing at A4 size or larger, Editing and processing images Printing at postcard size For use as images on websites, For attaching images to e-mail
Use the four-way controller (23) to select [Recorded Pixels]. Use the four-way controller (45) to change the size. Press the OK button.
The number of recorded pixels is fixed at 320240 in the Movie mode. Selecting a large size produces a clear picture when it is printed out. The Recorded Pixels setting is saved when the camera is turned off.

Rec. Mode Sharpness Saturation Contrast
The Sharpness setting is saved when the camera is turned off.
Setting the Color Saturation
You can set the color saturation. 4 Taking Pictures
Use the four-way controller (23) to select [Saturation]. Use the four-way controller (45) to change the setting from [Normal] to [High (+)] or [Low ()]. Press the OK button.
The Saturation setting is saved when the camera is turned off.
Setting the Image Contrast
You can set the image contrast.
Use the four-way controller (23) to select [Contrast]. Use the four-way controller (45) to change the setting from [Normal] to [High (+)] or [Low ()]. Press the OK button.
The Contrast setting is saved when the camera is turned off.
Setting the Exposure (EV Compensation)
You can adjust the overall brightness of the picture. Use this function to take pictures that are intentionally overexposed or underexposed.
Use the four-way controller (23) to select [EV Compensation]. Use the four-way controller (45) to change the EV setting.
To brighten, set a positive (+) value. To MENU Exit OK OK darken, set a negative () value. You can choose the EV setting in the range of 2.0 EV to +2.0 EV in 1/3 EV steps.
The camera is ready to take the picture. EV Compensation is registered on the four-way controller (45) in the Custom Function default settings in Capture mode, enabling you to change the EV setting without displaying the menu (1p.127). The AE metering mode is either center-weighted or spot when the EV setting is adjusted.
Saving the EV Compensation Value 1p.89

Saving the Settings

Saving the Menu Items (Memory)
You can choose whether you want the set values to be saved when the camera is turned off. If you select O (On), the settings will be saved in the status they were in immediately before the camera was turned off. If you select P (Off), the settings will be reset to the defaults when the camera is turned off.
Item Description Default Setting
Flash Drive Focus Mode Zoom Position MF Position White Balance AE Metering Sensitivity EV Compensation Digital Zoom DISPLAY File #
The flash mode setting on the b button is saved. The drive mode setting (gj, etc.) selected using the four-way controller (2) is saved. The focus mode setting on the ) button is saved. The optional zoom position setting on the Zoom button is saved. The manual focus position is saved. The [White Balance] setting on the [A Rec.Mode] menu is saved. The [AE Metering] setting on the [A Rec.Mode] menu is saved. The [Sensitivity] setting on the [A Rec.Mode] menu is saved. The [EV Compensation] setting on the [A Rec.Mode] menu is saved. The [Digital Zoom] setting on the [A Rec.Mode] menu is saved. The LCD monitor display mode is saved. The file number is saved. If a new SD Memory Card is inserted, file numbers are assigned sequentially.

6 Playback/Deleting/Editing
Press the Q Playback button. Refer to Playing Back an Image (p.30), or Playing Back the Previous or Next Image (p.30) for instructions on playing back images.

Zoom Display

You can display images magnified up to four times. A guide to operation appears on the LCD monitor during magnification.
Enter the Playback mode and use the four-way controller (45) to choose the image to magnify. Press x/y on the Zoom/f/y button.
The image is magnified (1 to 4). Holding down the button changes the magnification continuously.
The following operations can be performed while the magnified image is displayed. Four-way controller (2345) Moves the position to be magnified Zoom/f/y button (x) Makes the image bigger Zoom/f/y button (w) Makes the image smaller DISPLAY button Turns the guide marks on/off
Zoom playback ends. Movies cannot be magnified.
Setting the Quick Zoom Function You can display the image at maximum magnification simply by pressing the Zoom/f/y button once during zoom playback.
Select [Quick Zoom] on the [Q Playback] menu. Use the four-way controller (45) to select [On] or [Off].
On : Pressing y of the Zoom/f/y button once displays the image at maximum magnification Off : Pressing y of the Zoom/f/y button once magnifies the image in steps
The camera is ready to take or play back images.

4 1, 2, 3

Playing Back Movies
You can play back movies. You can play back the recording you made in Voice Recording mode at the same time. A guide to operation appears on the LCD monitor during playback. Operations include playback, frame by frame playback (forward or reverse), pause and volume adjustment.
Enter the Playback mode and use the four-way controller (45) to choose the movie to play back. Press the four-way controller (2). 100-0010
The following operations can be performed during playback. Four-way controller (4) Reverse playback 7/18/2004 Four-way controller (5) Forward playback 12:00 Four-way controller (2) Pause DISPLAY button Changes the display mode (1p.97) Zoom button w/x Adjusts the volume The following operations can be performed while Pause is engaged. Four-way controller (4) Frame reverse Four-way controller (5) Frame forward Four-way controller (2) Releases the Pause function DISPLAY button Changes the display mode (1p.97)

[Start] appears on the LCD monitor and playback starts at the set interval. Press any button, such as the OK button or MENU button, to stop the slideshow. [Stop] appears on the LCD monitor. The slideshow will continue until you press any button. Movies and pictures with a voice memo will be played through to the end before the next picture is played back, regardless of the set playback interval. Recordings made in Voice Recording mode are not played back.
Deleting Images, Movies and Sound

2 1, 3 4

Deleting a Single Image or Sound
You can delete single images or sounds.
Once deleted, images cannot be restored. You cannot delete protected (Z) images. (1p.103)
Enter the Playback mode and use the four-way controller (45) to choose the image or sounds to delete. Press the i button.
The Delete screen appears.
Use the four-way controller (2) to select [Delete]. Press the OK button.
The image or sound is deleted.
You can also delete images from Instant Review (p.84). You cannot delete protected (Z) images. If [Quick Delete] is set to On in the [Q Playback] menu, Step 3 can be omitted. (1p.101)
Deleting a Voice Memo only If an image has a voice memo, you can delete the voice memo without deleting the image.
Enter the Playback mode and use the four-way controller (45) to choose an image with a voice memo to delete. Press the i button.
Use the four-way controller (2) to select [Sound Delete]. Press the OK button.
The voice memo is deleted.
Sound Delete Delete Cancel Exit All
Select [Delete] in Step 3 above to delete both the image and the voice memo.
Setting the Quick Delete Function When the Quick Delete function is set to [On], the Delete screen appears with [Delete] or [Delete All] already selected.
Select [Quick Delete] on the [Q Playback] menu. Use the four-way controller (45) to select [On] or [Off]. Press the OK button.

Deleting All Images

You can delete all the images and sounds at once.
Once deleted, images cannot be restored. Protected (Z) images and sounds cannot be deleted.
Enter the Playback mode and press the i button twice.
The Delete All screen appears.
100-0010 Delete all images & sounds? Delete All Cancel

This warranty policy does not affect the customers statutory rights. The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
8 Appendix The CE Mark is a Directive conformity mark of the European Community.
For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/TV technician for help. For customers in Canada This Class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment Regulations. Pour les utilisateurs au Canada Cet apareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. 8 Appendix
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We: PENTAX IMAGING COMPANY A Division of PENTAX of America, Inc.
Located at: th Street, Suite 300 Golden, Colorado 80401 U.S.A. Phone: 303-799-8000 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein, complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR 2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR 15.101 to 15.109.

Product Name: PENTAX Digital Still Camera Model Number: Optio S5i Contact person: Customer Service Manager Date and Place: August, 2004, Colorado
Numerics 3D Pictures. 57 A AC Adapter. 19 Alarm. 130 Auto Power Off. 126 Autofocus mode. 72 AV cable. 104 B Background Color. 118 Battery. 14 Battery Level Indicator. 17 Battery/Card cover. 11 Best. 23 Better. 23 C Capture Mode. 34 Color Filter. 52 Color Saturation. 86 Continuous Shooting. 65 Custom Function. 127 D Date and Time. 122 DC input terminal. 11 Default Setting. 40 Delete All Images. 102 Delete button. 36 Delete Images. 100 Digital Filter Mode. 52 Digital Zoom. 67 DISPLAY button. 12 Display Language. 124 DPOF. 106 E Exposure. 88 F Flash. 11 Flash Mode. 75 Flash status lamp. 11 Focus frame. 29 Focus Mode. 72 Focus status lamp. 11, 29 Focusing Area. 81 Format. 120 Four-way controller. 12, 34, 35, 36 G Good. 23 Green Mode. 42 H Home Time. 123 I Image Contrast. 87 Image Sharpness. 85 Image Size. 23 Infinity-Landscape mode. 72 Initial Settings. 25 Instant Review. 29, 84 K Key Operation Sound. 122 L LCD monitor. 11 Lens. 11 Light Metering Range. 82 M Macro mode. 72 Manual Focus mode. 72 Marine Mode. 55 Memory. 89 MENU button. 35, 36 Messages. 134 Microphone. 11
N Night Scene Mode. 46 Nine Image Display. 98 Number of recordable images. 17 O OK button. 12, 36 Operating Time. 17 Optional Accessories. 133 P Pan Foucs mode. 72 Panorama Assist Mode. 49 PictBridge. 109 Picture Mode. 44 Play back Movies. 96 Play back Sound. 92 Play back Still Pictures. 30 Play back the Previous or Next Image. 30 Playback button. 12, 34, 36 Playback Menu. 41 Playback Mode. 36 Posterization. 53 Power switch. 11 Press down fully. 29 Press halfway. 29 Printer. 109 Program Mode. 43 Protect. 103 Protect button. 36 Q Quality level. 23, 78 QUICK button. 12, 36 Quick Delete. 101 Quick Zoom. 95 R Rec. Mode Menu. 40 Recording Sound. 91 Remote Control. 63 Reset. 129 Resize images. 113 146
Rotate the displayed image. 31 S SD Memory Card. 21 Self-Timer. 62 Self-timer lamp. 11 Self-timer Sound. 122 Sensitivity. 83 Set the Menus. 38 Set Up the Screen. 118 Set-up Menu. 41 Shutter release button. 11, 12, 28 Shutter Sound. 122 Slideshow. 99 Slim Filter. 53 Soft Focus Mode. 51 Sound Settings. 121 Speaker. 11 Start-up Screen. 118 Start-up Sound. 122 Strap. 13 Strap lug. 11 Super Macro mode. 72 Symbols. 9 T Take Movies. 47 Take Still Pictures. 28 Tele. 66 Terminal cover. 11 Time-lapse Movies. 68 Trimming. 115 Tripod socket. 11 TV. 104 U USB Connection. 125 USB/AV terminal. 11 User Mode. 54 V Video Output Format. 125 Viewfinder. 11 Voice Memo. 93

8 Index

Voice Recording Mode. 37 W White Balance. 79 Wide. 66 World Time. 123 Write-protect switch. 22 Z Zoom. 66 Zoom button. 12, 34, 36 Zoom Display. 94
2-36-9,Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.pentax.co.jp/) PENTAX Europe GmbH (European Headquarters) Julius-Vosseler-Strasse, 104, 22527 Hamburg, GERMANY (HQ - http://www.pentaxeurope.com) (Germany - http://www.pentax.de) PENTAX U.K. Limited PENTAX House, Heron Drive, Langley, Slough, Berks SL3 8PN, U.K. (http://www.pentax.co.uk) PENTAX France S.A.S. 12/14, rue Jean Poulmarch, 95106 Argenteuil Cedex, FRANCE PENTAX Benelux B.V. (for Netherlands) Spinveld 25, 4815 HR Breda, NETHERLANDS (http://www.pentax.nl) (for Belgium & Luxembourg) Weiveldlaan 3-5, 1930 Zaventem, BELGIUM (http://www.pentax.be) Widenholzstrasse 1 Postfach Dietlikon, SWITZERLAND PENTAX (Schweiz) AG (http://www.pentax.ch) PENTAX Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN (http://www.pentax.se) PENTAX Imaging Company A Division of PENTAX of America, Inc. (Headquarters) 600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A. (Distribution & Service Center) 16163 West 45th Drive, Unit H Golden, Colorado 80403, U.S.A. (http://www.pentaximaging.com) PENTAX Canada Inc. 1770 Argentia Road Mississauga, Ontario L5N 3S7, CANADA (http://www.pentaxcanada.ca)

PENTAX Corporation

http://www.digital.pentax.co.jp Specifications and external dimensions are subject to change without notice. 57426 Copyright PENTAX Corporation 2004 01-200408 Printed in Philippines

 

Tags

DVP-S725D LD-14AW1 K750I PET835 LS2000-2000 PM-3500C SA-HT440 FLS876C TCL42D2 MZ-G755 24 DCS Screen TH-42PA50E 73620-W Yamaha XJ6 PXE-H650 Radio DGB-600BC MV630I RM-VL700 4 LI 19DV555DG J-9940W LN40C610n1F LT180 Gr-ax230 Yamaha C-80 MEX-1HD HDC-XR100E 300TV Thinkpad R50E MO655 RX-V550 HT-SF2000 A7A133 5065R AHS WM-GX808 Master I Quicksilver 46SD Treo 600 IC-T7H WM1200A Review RSA1utvg WA10U3 PA-VR10E NWZ-E354 LA22B350 EF-303 HDR-SR11 VGC-LT90S Roland DD-6 12470 W Digitech RP3 RL34sgsw Software SCH-U410 D44000WXA Remote 670 GTO507C RM318PU WM-EX670 Canon Webcam Cooker II Station HT-S590 KH 3236 PCG-FR415M YP-VP1 DMC-LZ5 FS-Y1 D3122 SA-15S1 ZM-MFC2 PLC-SW20AR GR-80 PB-G13 SJ-3256 3265 VGN-AR71J AVR 7000 VCL-HG0872K Latitude X200 PS50B430 KVC-1000 AR-M450 Doro 513C CE-21F60KX 12 V LSR122H-3 VCL-HGE07A Ht820 SA-GX130D Passeo 400 Deskjet 690C Esam 4200 5464V XL 150 RS-B755 BA410 Prime075

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101