Language Video Output Format
English (English) French ( ) German (Deutsch) Spanish ( ) Italian (Italiano) Sweden (Svenska) Netherlands (Nederlands) Russian ( ) Korean ( ) Chinese (traditional) ( Chinese (simplified) ( Japanese
NTSC PAL PAL PAL PAL PAL PAL PAL NTSC PAL PAL NTSC

Taking Still Pictures

Power switch Shutter release button

2 Quick Start

QUICK button LCD monitor Zoom button
The simplest procedure for taking still pictures is described below. The flash fires automatically depending on the light conditions.

Press the power switch.

The camera turns on.
Confirm the subject and shooting information on the LCD monitor.
The focus frame in the middle of the LCD monitor indicates the zone of automatic focusing. You can change the size of the subject by pressing the zoom button. x : makes the subject bigger. w : makes the subject smaller.

5/24/2005 12:00

Focus frame
To switch to the Green mode and let the camera set all the shooting functions automatically, press the QUICK button. Selecting the Green mode is the easiest way to ensure that pictures come out well. Taking Pictures by the Simplest Procedure (1p.49)
Press the shutter release button halfway.
The focus frame on the LCD monitor will light green when the camera is in focus.
Press the shutter release button fully.
The image appears on the LCD monitor for one second (Instant Review) and is recorded on the SD Memory Card or in the built-in memory. (The green and red lamps above the zoom button blink alternately while the image is being recorded.)
Using the Shutter Release Button The shutter release button works in a two-step action as follows. Press halfway The focus and exposure are locked when the shutter release button is pressed lightly (halfway). The shutter speed and aperture settings only appear on the LCD monitor when the shutter release button is pressed halfway. The following information is indicated on the LCD monitor and by the focus status and flash status lamps when the shutter release button is pressed halfway. 1. Focus frame The focus frame turns green if the subject is in focus. The frame does not appear if the subject is out of focus. 2. Status lamps
Lights Blinks Focus status lamp (green) Subject is in focus Subject is out of focus Flash status lamp (red) Flash is charged Flash is charging
Pictures cannot be taken while the flash is charging. Press down fully Press the shutter release button all the way down (fully) to take a picture. [Poor focusing conditions] The camera may not be able to focus under the following conditions. In this case, lock the focus on an object the same distance away as the subject (by pressing the shutter release button halfway), then aim the camera at your subject and press the shutter release button fully.

Displays the [A Rec.Mode] and [B Set-up] menus. (1p.38)

Playback Mode

QUICK/ibutton
Deletes the image displayed on the LCD monitor. (1p.111)
Press w/f in single-image display to switch to nine-image display. Press x/y to return to the previous display. (1p.109) Press x/y to enlarge the image in single-image display. Press w/f to return to the previous display. (1p.104)
Switches to Capture mode. When switched to the Capture mode by pressing the Q Playback button in Voice Recording mode, pressing the Q Playback button again switches to the Voice Recording mode.

Four-way controller

For playing back still images
: Displays the previous or next image in single-image display. (1p.30) (3) : Rotates the image in single-image display. (1p.31) (2345) : Moves the display area of the enlarged image. (1p.104) Selects an image in nine-image display. (1p.109) (45)

For playing back movies

(2) (45) (3) : Plays back and pauses a movie. (1p.106)
: Frame forwards, frame reverses, fast forwards and reverses a movie during playback. (1p.106)
: Stops a movie during playback. (1p.106)
For playing back voice recording files
(2) Starts playback. When pressed again, pauses playback.
(45) Selects a recorded file before playback. Performs the following operations during playback. If there are no recorded indexes: When (4) is pressed during playback, rewinds five seconds. When (5) is pressed during playback, advances five seconds. If there are recorded indexes: When (4) is pressed during playback, plays back starting from the previous index. When (5) is pressed during playback, plays back starting from the next index.
Changes the information displayed on the LCD monitor. (1p.108) Returns to a single-image display in nine-image display. (1p.109)
Displays the Playback Mode Palette (1p.45)

Voice Recording Mode

1 Shutter release button
When pressed, starts recording, and when pressed again, stops recording. When pressed for more than one second, recording continues for as long as the button is held down and stops when the button is released.
Switches to Playback mode. (1p.33) When pressed again, returns to Voice Recording mode.

p.59 p.63

Playback Mode Palette

Slideshow

Item Item Slideshow Resize Trimming Copy image and sound Color Filter Brightness Filter Movie Edit Voice Memo
Description For playing recorded images successively For changing the size and quality level of images For trimming images and saving them as separate images For copying files from the built-in memory to the SD Memory Card and vice versa For processing images using the color filter For adjusting the brightness of images using a filter For editing movies For adding a voice memo to an image For protecting images and sounds to avoid accidental erasure For printing images from a DPOF compatible printer or at a printing service For setting the Start-up screen

Default Page setting

3 sec B&W p.110 p.125 p.127 p.134 p.128 p.129 p.131 p.102 p.114 p.118
Z Protect DPOF Start-up screen

Optio p.136 screen

Changing the Mode
Capture mode is for taking pictures and Playback mode is for playing back or deleting images. Switching between Capture Mode and Playback Mode To change from Capture mode to Playback mode, press the Q Playback button. To change from Playback mode to Capture mode, press the Q Playback button or press the shutter release button halfway.

4 Taking Pictures

Selecting the Capture Mode
Pressing the QUICK button activates the Green mode. Other capture modes are selected from the Mode Palette. (1p.43)
Displaying Shooting Information in Capture Mode
You can display shooting information on the LCD monitor when taking pictures. The display mode can be changed by pressing the OK/ DISPLAY button. Normal Display 78 Shooting information is displayed when the power is turned on. Capture mode 2 Flash mode 3 Drive mode 4 Focus mode 6 Card/Built-in memory 5 Focus frame 7 Battery indicator 5/24/2005 1/Remaining number of recordable images F2.6 12:Date and time 10 Aperture 11Shutter speed 9
Histogram Display The brightness distribution of the image is displayed. The horizontal axis shows the brightness (darkest at the left end and brightest at the right end) and the vertical axis shows the number of pixels. 1 Recorded Pixels 2 Quality Level 3 White Balance 4 AE Metering 5 Sensitivity 6 Histogram Guide Display The grids divided into three parts are displayed. These grids will help you to improve composition.

The picture is taken.

Taking Still Pictures 1p.28
Selecting the Picture Mode According to the Shooting Scene (Picture Mode)
You can select the Picture mode according to the shooting scene. There are 10 available modes in Picture mode.
H I J S K Landscape Flower Portrait Self-portrait Sunset K Food E Pet

Text Sports

L Surf & Snow
Lets you capture the natural colors of landscape views. Lets you take brightly colored flower pictures. Lets you take portraits with spatial effect, by emphasizing the person. Lets you take pictures of yourself or include yourself in pictures. Lets you reproduce the beautiful colors of the sunrise or sunset. Lets you take appetizing pictures of prepared food. Lets you take clear pictures of pets to fit the hair color. Lets you take clear pictures of text or writing. Also lets you turn colored text black/white or reverse color. Lets you take clear pictures of moving subjects with a high shutter speed. Lets you take photos against dazzling backgrounds like beaches or snow-covered mountains.
Use the four-way controller (2345) to choose the desired mode.
For example, select H (Landscape mode).
Press the OK button. Press the shutter release button halfway.

Landscape

The picture is taken. In Picture mode, the EV compensation, saturation, contrast, sharpness and white balance are automatically set to their default settings. You can change the settings.
Taking Pictures of Your Pet (Pet Mode) 4 Taking Pictures
In Pet mode, you can take pictures that shows natural hair color of your pet. Choose the appropriate icon depending on what color your pet is (closer to black or white or in between).
Use the four-way controller (2345) to select E. Press the OK button.
The screen for selecting the pet mode appears.
Use the four-way controller (23) to select E, F, F, H, G or G.
OK There are two icons of a cat and a dog. (Choosing either the cat or dog icon does not affect the resulting picture. Choose whichever you prefer.)
The Pet mode is selected and the camera is ready to take the picture.
The focus frame turns green when the subject is in focus.

5/24/2005 14:25

Taking Pictures of Text (Text Mode) This mode allows you to take clear pictures of written text. This is convenient for capturing a digital copy of an important document or enhancing legibility of small print.
Use the four-way controller (2345) to select W. Press the OK button.
The screen for selecting the text mode appears.
Use the four-way controller (23) to select , , ,.
Color Neg. Color B&W Neg. B&W Maintains original colored text. Reverses colored text. Turns colored text black/white. Reverses black/white text.
The text mode is selected and the camera is ready to take the picture.

Use the four-way controller (23) to select $ (Soft Filter).
The picture is taken in Soft Filter mode.
Taking Pictures with the Slim Filter The screen for setting the slimness level appears when you select the slim filter in Special Effect mode.
Use the four-way controller (23) to select O (Slim Filter). Use the four-way controller (45) to set the slimness.
: Stretches the image up to twice its size horizontally. + : Stretches the image up to twice its size vertically.
The picture is taken with a slim filter effect.
Taking Pictures with Comment Space You can take a picture leaving a small space at the right side or at the bottom so that you can comment on it by hand. You can choose a style of the comment space from four types.
Use the four-way controller (23) to select.
leaves 1/8 of a picture at the bottom as a comment space. leaves 1/4 of a picture at the bottom as a comment space. leaves 1/8 of a picture at the left side as a comment space. leaves 1/4 of a picture at the left side as a comment space.
The comment space is selected and the camera is ready to take the picture.
The picture is taken with a small space. When you use the Focusing Area mode with the comment space, make sure that the focus frame and the comment space do not overlap one another. (1p.74)
Using Preset Function Settings (User Mode)
In User mode, you can take pictures using the functions and settings registered in advance in User mode. 4 Taking Pictures
Use the four-way controller (2345) to select E (USER mode).
Registering Functions in User Mode 1p.97

2, 3 1

Using the Self-Timer
In self-timer mode, the picture is taken ten seconds or two seconds after the shutter release button is pressed. 4 Taking Pictures
Press the four-way controller (2) in Capture mode to display g or r on the LCD monitor. Press the shutter release button halfway.
g The self-timer is engaged and the selftimer lamp lights for about seven seconds. The picture is taken 5/24/2005 approximately three seconds after the 12:00 self-timer lamp starts to blink. r The self-timer is engaged and the picture is taken approximately two seconds after the self-timer lamp starts to blink. Focusing may be compromised if you move the camera while the self-timer is running. The countdown is displayed on the LCD monitor when you press the shutter release button. To cancel the self-timer, press the MENU button while the second count is displayed.

Taking Pictures of Yourself 1p.51 Troubleshooting Subject is not in focus 1p.157
Using the Remote Control Unit (optional)
You can switch the Drive mode to Remote Control mode and take pictures using the remote control unit E or F (optional). 4 Taking Pictures Using the Remote Control Taking Pictures
Press the four-way controller (2) in Capture mode to display i or h on the LCD monitor.
The self-timer lamp blinks slowly and the camera is ready to take the picture.
Press the shutter release button on the remote control unit.
i The self-timer lamp blinks quickly and the picture is taken after approximately three seconds. h The picture is taken immediately.
Focusing may be compromised if you move the camera while the self-timer lamp is blinking.
Changing the Magnification Using the Remote Control Unit You can not only change the zoom magnification with the zoom button, but also shoot images with the shutter button using the remote control unit E (optional).
Press the four-way controller (2) in Capture mode to display i or h on the LCD monitor. The function is same either in i or h. Press the zoom button on the remote control unit.
Each time you press the zoom button, the zoom position will change among tele, middle, and wide.
The zoom position will not change in Super Macro mode, even if you press the zoom button. The buttons on the camera can be used in the normal way. Ensure that the remote control unit is no more than about four meters away from the front of the camera. You cannot change the digital zoom range with the remote control unit; you can change only the optical zoom range.
Life of the Battery for the Remote Control Unit A signal can be sent from the remote control unit to the camera approximately 30,000 times. Contact your nearest PENTAX customer service center if the battery needs changing. (A charge is made for changing the battery.)
Continuous Shooting (Continuous Shooting Mode)
You can switch the Drive mode to Continuous Shooting mode. Pictures are taken continuously while the shutter release button is pressed. 4 Taking Pictures
Press the four-way controller (2) in Capture mode to display j on the LCD monitor. Press the shutter release button halfway.
Pictures are taken continuously while the shutter release button is pressed. Shooting stops when you take your finger off the shutter release button. You can continue shooting until the SD Memory Card or the builtin memory is full. The interval will vary according to the [Recorded Pixels] and [Quality Level] settings. The flash will not discharge in Continuous Shooting mode. Continuous shooting is not available for Movie or Panorama Assist mode. The focus, exposure and white balance are locked with the first image.

Using the Zoom to Change the Subject Size
You can use the zoom to change the size of the subject and take pictures in Tele or Wide mode. 4 Taking Pictures
Press the zoom button in Capture mode.
x Tele: makes the subject bigger. w Wide: makes the subject smaller.
When the digital zoom function is disabled, you can take pictures at up to three times magnification using the optical zoom. When the digital zoom function is enabled, you can further enlarge the subject to a maximum magnification equivalent to 12 times.
Zoom bar Digital zoom range
When digital zoom is enabled
Saving the Zoom Position 1p.96
You cannot use the optical zoom when taking movies.
Setting the Digital Zoom The digital zoom is set to O(On) in the default settings. To take pictures using only the optical zoom, set the digital zoom to P(Off).
The [A Rec.Mode] menu appears.
Use the four-way controller (23) to select [Digital Zoom]. Use the four-way controller (45) to select O (On)/P (Off). Press the shutter release button halfway.
Saving the Digital Zoom Function Setting 1p.96

6, 7, 8

2, 3, 4, 5 1

Taking Time-lapse Movies

This mode lets you take movies at a delayed frame rate so that when you play the movie back, the action appears speeded up. 4 Taking Pictures
Press the MENU button in Movie mode.
Use the four-way controller (23) to select [Time-lapse Movie]. Press the four-way controller Movie (5). Time-lapse Movie x20
A pull-down menu appears.
Use the four-way controller (23) to change the time-lapse setting.
You can choose from [Off], [2], [5], [10] and [20].

x10 x5 x2 Off Cancel

The camera is ready to record a time-lapse movie.
Recording of a time-lapse movie starts. The selected time-lapse setting appears on the LCD monitor.

07:34 x10

Stops recording movie. Off (1) is the normal setting for movies (approximately 30 frames per second). Each time 2 or 5 is selected, the number of frames taken per second is reduced to 1/2 or 1/5. As movies are normally played back at the rate of approximately 30 frames per second, movies taken at 2 appear to be played back at twice the normal speed and movies taken at 5 appear to be played back at five times the normal speed. Sound cannot be recorded.

Use the four-way controller (23) to select [Instant Review]. Press the four-way controller (5).
Use the four-way controller (23) to change the display time. Press the shutter release button halfway.
Rec. Mode EV Compensation Movie Digital Zoom Aux. AF Light Instant Review Memory
0.sec 3 sec 1 sec 1 sec 0.5 sec Off
The Instant Review setting is saved when the camera is turned off.
Setting the Color Mode (Color Mode)
You can choose the color from Full color, B & W and Sepia.
Use the four-way controller (23) to select [Color Mode]. Press the four-way controller (5).
Rec. Mode Color Mode Full Color Fn Setting Quick Button Green Mode Sharpness Saturation Contrast
Use the four-way controller (23) to change the Color mode. Press the shutter release button halfway.
Rec. Mode Color Color Mode Full color Fn Setting B&W Sepia Quick Button Green mode Sharpness Saturation Contrast
You can set the Color mode both for still images and movies. When selecting the picture mode, the effect of the picture mode is based on the Color mode setting.

2, 3, 4, 5, 1

Registering Frequently Used Functions (Fn Setting)
You can register frequently used functions on the four-way controller. Using this function, you can directly set the functions by pressing the four-way controller without displaying the menu in Capture or Playback mode.
Use the four-way controller (23) to select [Fn Setting]. Press the four-way controller (5).
The Fn Setting screen appears.
Use the four-way controller (23) to select a key you want to assign a function to. Press the four-way controller (5).
Fn Setting Recorded Pixels EV Compensation WB White Balance ISO Sensitivity
Use the four-way controller (23) to select a function you want to assign. Press the OK button. Press the shutter release button halfway.
Fn Setting Recorded Pixels Pixels Quality Level EV Compensation WB White Balance WB Focusing Area AF White Balance AE AE Metering ISO Sensitivity ISO Sensitivity
This function is activated only when assigning the Fn Setting to the QUICK button. For the initial setting, the functions registered are as follows: 2 (Recorded Pixels), 3(EV Compensation), 4(White Balance), and 5(Sensitivity). You can assign only one function to each key. The functions you can assign are as follows: Recorded Pixels, Quality Level, White Balance, Focusing Area, AE Metering, Sensitivity, EV Compensation, Sharpness, Saturation, Contrast, Off.

Setting the QUICK Button

O P P P P P P P P P O P O
Menu items not included in [Memory] will also be saved in the settings selected on the menus for each function when the camera is turned off. The zoom position setting in the digital zoom range will not be saved even if [Zoom Position] is set to O(On) in [Memory].
Use the four-way controller (23) to select [Memory]. Press the four-way controller (5).
The [Memory] menu appears.
Use the four-way controller (23) to choose an item. Use the four-way controller (45) to select O (On) or P (Off). Press the shutter release button halfway.
Registering Functions in User Mode
Functions set with the Capture mode on E will be registered in User mode. Functions Registered in User Mode
Items Registered in User Mode Default Setting
Flash mode Drive mode Focus mode Zoom position Manual focus position Changing the focusing area Shooting information display Recorded Pixels Quality Level White balance Focusing area
Auto Single image Autofocus Wide angle Infinity Center Normal 5M D AWB (auto) [ ] (Multiple)
Page p.75 p.64 p.72 p.68 p.73 p.74 p.46 p.76 p.78 p.80 p.82
Items Registered in User Mode

Default Setting

AE metering Sensitivity Sharpness Saturation Contrast EV compensation Aux. AF Light Color Mode
L (Multi-segment) AUTO (Normal) (Normal) (Normal) 0.0 O (On) Full color
Page p.83 p.85 p.93 p.94 p.95 p.86 p.87 p.89
The settings of these items are memorized separately in User mode and Capture mode. These settings are retained until [Reset] is selected in the [B Setup] menu or the setting is cleared using the QUICK button.
Returning the Shooting Functions to the Default Settings
This function lets you return all the shooting function settings to the defaults. All the items on the [A Rec.Mode] menu and the settings for flash, drive, focus, and displayed information are reset. For details on Rec. Mode menu, refer to Menu List (p.41).
The [Initialize Rec. Mode?] message appears.
Use the four-way controller (23) to select [Initialize]. Press the OK button.
All the shooting function settings return to the defaults and the camera returns to Capture mode.

Initialize Rec. Mode?

Initialize Cancel
The settings registered in User mode return to the default. This function cannot be used when assigning a function other than Initialize Rec. Mode to the QUICK button. (1 p.92)
Recording Sound (Voice Recording Mode)
You can record sound. The recordable time appears on the LCD monitor according to how much space is available on the SD Memory Card. 2, 3

Power indicator

Microphone
Press the power switch for more than two seconds, or press the power switch while pressing the OK button.
The power indicator lights red. The recordable time appears on the LCD monitor. 1 Remaining recordable time 2 Recording time

The following operations can be performed while pause is engaged. Four-way controller (4) Frame reverse (fast-rewind by 30 frames) Four-way controller (5) Frame forward (fast-forward by 30 frames) Four-way controller (2) Releases the pause function OK button Changes the display mode (1p.108)
Playback stops and the screen returns to the first frame.
The camera returns to Capture mode.
No sound is output during fast-rewind and fast-forward playback.
Magnifying a Paused Movie You can display a paused movie magnified up to four times.
Enter the Playback mode and use the four-way controller (45) to choose the movie to play back. Press the four-way controller (2).
Press the four-way controller (2) on the scene you wish to magnify.

The movie is paused.

Press x/y on the zoom button.
Each time you press the button, the image is enlarged (up to four times).
The following operations can be performed during playback. Four-way controller (2345) Moves the position to be magnified Zoom button (x) Makes the image bigger Zoom button (w) Makes the image smaller
Press the OK button. Press the four-way controller (2).
You can playback the movie after having it enlarged.
Displaying Shooting Information in Playback Mode
Shooting information can be displayed on the LCD monitor in Playback mode. Pressing the OK button changes the display mode. Normal Display Shooting information is displayed. 1 Voice Memo icon 100-Card/Built-in memory icon 3 Folder name 4 File name 5 Protect icon 6 Battery indicator 7 Shooting date and time 5/24/Four-way controller operation guide 12:00
Histogram Display 12345 The brightness distribution of the image is displayed. The horizontal axis shows the brightness (darkest at the left end and 5M brightest at the right end) and the vertical axis AWB shows the number of pixels. ISO Recorded pixels 2 Quality level 1/White balance 4 AE metering F2.Sensitivity 6 Histogram 8 Shutter speed 7 Aperture No icons No shooting information is displayed.

Normal Display

2 1, 2 3

Nine-Image Display

You can display nine images at the same time.
Enter the Playback mode and use the four-way controller (45) to choose an image. Press w/f on the zoom button.
A page consisting of nine thumbnail images appears. The displayed images change nine at a time page by page. Use the four-way controller (2345) to ? move the frame. When ten or more images 100-0010 have been saved, if you choose an upperSelected image left image and press the four-way controller (4), the previous page appears. Similarly, if you choose a lower-right image and press the four-way controller (5), the next page appears. The icons that appear on the images indicate the following: No icon : Still picture without voice memo : Still picture with voice memo O (with image) C : Movie (first frame appears) O (without image) : Sound file only : Undisplayable image

The Resize screen appears.

Resize

Use the four-way controller (45) to change the size. Press the four-way controller (3).
The frame moves to [Quality Level].
Recorded Pixels Quality Level
Use the four-way controller (45) to change the quality.
Press the OK button. Use the four-way controller (23) to select [Overwrite] or [Save as]. Press the OK button.
The resized image is saved. Movies cannot be resized. You cannot select a larger size than that of the original image. Protected (Z) images cannot be overwritten.

1, 3 4, 6 2

Trimming Images
You can trim a part of a picture and save it as a separate image.
Use the four-way controller (45) in Playback mode to select an image to trim. Press the MODE button.
Use the four-way controller (2345) to select (Trimming).

Trimming

The Trimming screen appears.

Trim the image.

Operations that can be performed on the Trimming screen

Zoom button:

Changes the size of the trimming Four-way controller (2345): Moves the trimming position up, down, left and right MENU button: Returns to the screen for selecting an image
The trimmed image is saved as a separate image. Movies cannot be trimmed. The image size is changed and saved.

1, 3, 5, 7 4, 6, 8 2

Editing Pictures with Color Filters
This function enables you to edit still pictures with color filters. You can choose from eight filters: B&W, Sepia, Red, Pink, Purple, Blue, Green and Yellow.
Use the four-way controller (45) in Playback mode to select an image to edit. Press the MODE button.
Use the four-way controller (2345) to select D (Color Filter).

Color Filter

The color filter screen appears.
Use the four-way controller (23) to choose a color. Press the OK button.
The overwrite confirmation screen appears.
Use the four-way controller (23) to select [Overwrite] or [Save as]. Press the OK button.
The edited image is saved with the same number of recorded pixels and quality level as the original.
Editing Pictures with Brightness Filter
This function enables you to adjust the brightness of still pictures with the brightness filter.

Sound Operation Volume Playback Volume Start-up Sound Shutter Sound Operation Sound Self-timer Sound

Changing the Sound

Use the four-way controller (23) to select [Start-up Sound]. Press the four-way controller (5).
Use the four-way controller (23) to select [1], [2], [3], [4], [5], or [Off].
Change the [Shutter Sound], [Operation Sound], and [Self-timer Sound] in the same way. Press the shutter release button halfway.
The camera is ready to take pictures. The Sound settings are saved when the camera is turned off.
Changing the Date and Time
You can change the initial date and time settings. You can also set the style in which the date appears on the camera. Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd].
Select [Date Adjust] on the [B Set-up] menu. Press the four-way controller (5).
Use the four-way controller (23) to select [24h] (24-hour display) or [12h] (12-hour display).
Date Adjust Date Style Date Time mm/dd/yy 24h 1/ 1/2005 0:00
Change the day and year in the same MENU Cancel OK OK manner. Next, change the time. If you select [12h] in Step 6, the setting switches between am and pm corresponding to the time.

Setting the World Time

The date and time selected in Initial Settings (Setting the Display Language and the Date and Time) (p.25) serve as the Home Time setting. You can display the time in a city other than the Home Time city (World Time). This is useful when taking pictures abroad.
Select [World Time] on the [B Set-up] menu. Press the four-way controller (5).
The World Time screen appears.

World Time 14:25

New York New York

DST OFF DST OFF

Use the four-way controller (45) to select O (On)/P (Off).
O :Displays the time in the city selected in X (Destination) P :Displays the time in the city selected in W (Hometown)
The frame moves to the X (Destination) city. The city that is currently selected lights up on the map.
Use the four-way controller (45) to choose a city.
Press the four-way controller (3). Use the four-way controller (45) to set whether daylight saving time is used or not.
Select if the Destination city uses daylight saving time.

World Time

Press the four-way controller (3). Use the four-way controller (45) to set your present location. Press the four-way controller (3). Use the four-way controller (45) to set whether daylight saving time is used or not.