Total Station V-200 Series Specifications Model
Telescope Magnetification Resolving power Field of view Minimum focus distance Measuring method Minimum angle display Standard deviation (Angle) Vertical angel compensation Accuracy:

V-227N

30X 3" 130' (2.6% - 26m at 1km) 1.0m Absolute rotary encoder 5" (10cc)/10" (20cc) (Selectable) 7" (2 mgon) Single axis (5+2ppm x D)mm (3+2ppm x D)mm 1.5 - 90m 1.5 - 800m 1.5 - 1400m 1.5 - 1900m Prism 2.0sec (1mm) Prism 0.4sec (1cm) Yes 6000 40"/1div. 8'/2mm type accuracy Magnification Field of view Focusing range RS232C IP44 (instrument only) 172(W) x 343(H) x 177(L)mm 5.4kg (incl. Battery) Grey / Red / Black DC 6V 4300 mAh Ni-Mh

30X 3" 1.0m

Angle measurement

Distance measurement

* Designs and specifications are subject to change without notice. - Printed in Belgium - PENTAX 2006 - SURVEY/01/10/06

Distance measurement:

Measurement time
Reflectorless Reflective sheet/foil Prism Reflectorless Reflective sheet/foil Mini Prism Prism: 1P 3P 9P Normal Fine Coarse Tracking
7" (2 mgon) Single axis (3+2ppm x D)mm 1.5 - 600m 1.5 - 1000m 1.5 - 1300m Prism 2.0sec (1mm) Prism 0.4sec (1cm)

Miscellaneous

Internal memory Memory capacity- Collect Plate Vial sensitivity Circular level sensitivity Laser Plummet: Optical Plummet:

40"/1div. 8'/2mm

Interface Water resistance Dimension (mm) Weight External color Battery:
- Voltage - Ampere - Type
Grey / Red / Black DC 6V 4300 mAh Ni-Mh

100% Small 100% Big

Performance in a cost-effective way

V-227N | V-227

Easy to use Reflectorless Affordable Robust design Made for growth markets
Applications which Power Topo Express supports in your daily work: Surveying Stake Out Point to line Graphical View Free Station Remote Height 2D Surface Remote Distance The major benefits of the Power Topo Express are its flexibility and ease of use which lets inexperienced operators perform.

Ahead of Vision

Light is the element of seeing and it brings color into the world. Pentax has excelled in this medium for over 85 years. Since our beginning our engineers have brought forth innovative precision optical equipment year after year. Pentax Optics photo cameras, medical endoscopes as well as industrial and measuring optics are always ahead of their time regarding quality, precision and innovation.

CAUTION

LASER RADIATION - DO NOT STARE INTO BEAM

620-690 nm/0.95mW max.

PENTAX Industrial Instruments Co., Ltd. World Headquarters 2-5-2 Higashi-Oizumi Nerima-ku, Tokyo 178-8555, Japan Tel.: +Fax: + e-mail: international@piic.pentax.co.jp www.pentax.co.jp/piic/survey
European Headquarters PENTAX Technologies Europe-Surveying Div. Weiveldlaan 3-5 B-1930 Zaventem, Belgium Tel.: +Fax: +e-mail: info_survey@pentaxeurope.com

CLASS II LASER PRODUCT

Laserclass II, conform FDA 21 CFR Ch. 1 1040
Visit the R-200 series at: www.pentaxsurveying.com
Japan Surveying Instruments Manufacturers Association
Your Official Pentax Dealer
Member symbol of the Japan Surveying Instruments Manufacturers Association representing the high quality surveying products.
The V-200 is a electronic theodolite, a coaxial distance meter, and a full-featured total station with reflectorless measuring capacity which provides an exceptional performant and cost-effective solution to a wide range of general and concrete construction applications and is designed to be accessible to users of all skill levels.

V-200 Key features

Advantages to the user/operator Easy to use Operator Friendly
Internal memory with a large storage capacity of 6000 points
Quick selection of the different measuring modes
The V-200 measures distances with or without a prism and that with equal ease. Quickly select the desired laser mode with only one keystroke and the built-in distance meter measures inaccessible points up to 90 meters away without a prism and range up to 1900 meters using a single prism unit while maintaining a standard deviation of (3+2ppm x D).
Absolute rotary encoder keeps the absolute angle position even after shutdown of the V-200
Simple Intuitive User Interface for all skill levels On-board Software Power Topo Express
All inspection operations are directly controlled via five keys and a standard user interface with a pull-down menu that guides you through setup and survey routine execution.
Standard Camcorder Battery
Pentax Precision Optics with 30 x magnification

Large LCD Display

The V-200 features a large LCD display which is easy to read.
Effective data management and Exchange
Information between the V-200 and a computer can be exchanged via a standard RS-232 cable.
Offers up to a whole working day and best price /performance ratio.Eliminates the costly customized batteries. Navigation Key
Upload and datatransfer via onboard data connection
Compact for Optimal portability
The V-200 is compact and lightweight and the standard configuration with everything what you need, excluding a tripod and prism, for a days work fits into a easy-to-carry case.

PEN-V200-QUI-Cover

30-08-2006

Pagina 1

TOTAL STATION

QUICK REFERENCE GUIDE

BASIC PROCEDURES POWER TOPO EXPRESS

SERIES

PENTAX Industrial Instruments Co., Ltd.
2-5-2 Higashi-Oizumi Nerima-Ku, Tokyo 178-8555, Japan Tel. +Fax +E-mail: international@piic.pentax.co.jp Website: www.pentax.co.jp/piic/survey www.pentaxsurveying.com

Ahead of Vision

Quick Reference Guide Basic Procedures
for Total Station V-200 Series

V-227N V-227

The description concerning the reflectorless function in this guide is applied to V-227N. PENTAX Industrial Instruments Co.,Ltd.
CONTENTS General Instruction Manuals Precautions regarding safety Warning Usage Precautions 1 1.1 1.2 1.3 1.4 1.4.1 1.4.2 1.5 1.5.1 1.5.2 1.6 1.6.1 1.6.2 1.6.3 1.6.4 1.6.5 1.6.2.1 2.4 Basic Operation Removing the Battery Attaching the Battery Turning the Power On and Off Display and keyboard Operation keys Function keys Angle Measurement Horizontal Angle Vertical Angle Distance Measurement Select your target Distance Measurement Changing Target constants Input Temperature and Atmospheric pressure Adjusting LCD contrast Adjusting Illumination brightness Changing Instrument Settings Help menu Instrument setting items Warning and Error Messages Specifications Notice to the user of this product
PowerTopoExpress 8.1 8.2 8.3 8.4 8.9.1 9.2 9.3 9.10.1 10.2 10.11.1 11.2 11.3 11.12.1 12.2 12.3 12.4 12.16 Starting Special Function Creating / Selecting a Job File Input a Known Point Coordinate Rectangular Coordinate Measurement Station Point Setup Orientation (Station Point H.Angle Setup) Measurement Offset Measurement Remote measurement Polar Coordinate Measurement Station Point Setup Orientation (Station Point H.Angle Setup) Measurement Offset measurement Free Stationing Known Point Setup Measuremen Calculation Stake Out Station Point Setup Orientation (Station Point H.Angle Setup) Stakeout Point Setup Stakeout Measurement Stake Out (Point to Line) Station Point Setup Orientation (Station Point H.Angle Setup) Point A Setup Point B Setup Point To Line Measurement INVERS Area Calculation REM RDM (Remote Distance Measurement) Preference List 44 45
Instruction Manuals Quick Reference Guide is intended to provide a quick reference in the field. For ease of use in the field, the following Quick Reference Guide booklets are provided in the carrying case. 1. Quick Reference Guide (Basic procedure) (Power Topo Express,Operating procedure) The complete instruction manuals are contained on the CD that is attached to each V-200. This guide uses the symbol xNas an expression of repeating times of key operation. For example. x2 means that [ESC] key is pressed two times. The symbol +expresses that multiple keys are pressed simultaneously. RECAUTIONS REGARDING SAFETY Before using this product,be sure that you have thoroughly read and understood the instruction manual that is included in the attached CD-ROM to ensure proper operation.
PWARNING Solar Observation Never view the sun directly using the telescope as this may result in loss of sight.
Laser Safety V-200 is a class-II (2) Laser product. Avoid direct eye exposure. Do not stare into laser beam. Electro-Magnetic Compatibility (EMC) This instrument complies with the protection requirement for residential and commercial areas. If this instrument is used close to industrial areas or transmitters, the equipment can be influenced by electromagnetic fields.

Risk of Explosion Do not use this product in a location where there is coal dust,or near flammable material as there is a risk of explosion. PUSAGE PRECAUTIONS Target Constant Confirm the Target Constant of the instrument before measurement. Reflectorless The reflectorless measurement range may vary depending on the target and surrounding brightness. In case the reflectorless measurement results in low accuracy, perform the distance measurement by Prism. (V-227N) Battery & Charger Use the battery charger that is suitable to the battery you are using. If water should happen to splash on the instrument or the battery, wipe it off immediately and allow it to dry in a dry location.
1. Basic Operation 1.1 Removing the Battery
(1) Rotate the knob above the battery pack counter-clockwise. (2) Lift up the battery pack and remove it from the instrument. 1.2 Attaching the Battery
(1) Place the channel on the bottom of the battery pack, onto the protrusion of the instrument and push the battery pack down into place. (2) Turn the knob clockwise.
1.3 Turning the Power On and Off To set power on : To shut down:
To turn the power supply off, press the I/O key for more than 1 second and then release it. Power turns OFF. NOTE: The power is automatically turned off after 10 minutes of inactivity (Factory default setting).
1.4 Display and keyboard 1.4.1 Operation keys
Returns to previous screen or cancels an operation. Turns the illumination of the LCD display and telescope reticle on and off. Moves the cursor to the direction,respectively. The up or down increases or decreases the value,respectively.
Accepts the selected (highlighted) choice or the displayed screen value. Pressing this key causes a help menu to appear in MODE A or MODE B or causes a help message to appear.

[HELP]

1.4.2 Function keys MODE A

[MEAS]

Pressing this key one time measures the distance in normal mode.Pressing this key twice measures the distance in coarse mode. Select the target type by following order. (V-227N models only) PRISM / REFRECTORLESS Resets the horizontal angle to 0 by pressing twice. Switches the display composition in the order H.angle / H.dst. / V.dst., H.angle / V.angle / S.dst. and H.angle / V.angle / H.dst. / S.dst. / V.dst. Switches the screen between MODE A and MODE B.

[TARGET]

[0 SET] [DISP]

[MODE]

MODE B

[S.FUNC] [ANG SET]

PowerTopoExpress Special Functions Brings up the angle setting screen for setting angle-related parameters. (H.ANGLE / %GRADE, H.ANGLE INPUT and R/L REVERSE) Pressing this key twice retains (holds) the horizontal angle shown on the display. Brings up the screen for changing the target constant,temperature, Pressure setting. Switches the screen between MODE A and MODE B.

[HOLD]

[CORR]
1.5 Angle Measurement 1.5.1 Horizontal Angle
Set the screen MODE A : MODE A screen
Control keys for measuring horizontal angle:

To set the angle to 0

To hold the angle

To release HOLD

To input an angle

input value by using :

To read clockwise angle :

1.5.2 Vertical angle

To display vertical angle :

To read the slope % :

1.6 Distance Measurement Set the screen MODE A : MODE A screen

(V-227N models only)

1.6.1 Select your target
Select target type (measurement mode): (Prism) (Reflector-less)
NOTE: The selected target is maintained until next time you change 1.6.2 Distance measurement
For a single shot measurement :

For tracking measurement

NOTE: The number of shots can be defined. The default is one time.The measuring modes activated by the above operations can be also changed. 1.6.3 Changing Target constants
The default constants are: Prism : -30mm Reflector-less : always 0mm
Before changing the constants,set Target Constant in the Initial Setting to INPUTmode:
To change Prism constant:

input value by using: 13

1.6.4 Input Temperature and Atmospheric pressure

To Input temperature :

input value by using:
To Input atmospheric pressure:
1.6.5 Adjusting LCD contrast
1.6.6 Adjusting Illumination brightness for LCD

for Reticle

2. Changing Instrument settings 2.1 Help menu While the screen is in MODE A or MODE B,

Select a desired item by

Change the setting
NOTE: Some items have sub-menus where the selecting procedure by using direction keys is again repeated. 2.2 Instrument setting items HELP menu list
PRISM CONST ATM CORR SHOT COUNT CRV/ REF CORR ATM CORR DISP MIN UNIT ANG. V. ANG. STYLE QUAD BUZ AUTO OFF EDM OFF COMPENSATOR ATM UNIT DIST. UNIT ANG. UNIT SET UP COM. SHOT CONT SHOT INPUT

(Default)

Other options

TEMP. UNIT PRESS UNIT

BAUD RATE DATA LENGTH PARITY BITS STOP BITS SIGNAL CONTROL XON/ XOFF THROUGH COMMAND
(-30mm), 0mm, INPUT (ATM INPUT), ppm INPUT, NIL (1 time), 3 times, 5 times, INPUT (01 times), input (0.14), 0.2, NIL (OFF), ON (FINE), COARSE (Z. 0), H. 0, COMPASS (OFF), ON (10 MIN), 20 MIN, 30 MIN, NIL (3 MIN), 5 MIN, 10 MIN, NIL (ON), OFF (Centigrade), Fahrenheit (hPa), mmHg, inchHg (m), ft, ft+ inch (DEG), DEC, GRD, MIL (1200), 2400, 4800, 9600 (8), 7 (NIL), EVEN, ODD (1), 2 (ON), OFF (ON), OFF (NIL), a, b, c, d, e, f
3. Warning and Error Messages

Warning Message

Out of tilt range

Meaning

What to do
Re-level the instrument. Repair is needed if the message is displayed when it is properly leveled. Press the [ESC] key and enter the correct data. Select the correct target, mode.
Displayed when the instrument is tilted beyond the vertical compensation range (3) in case automatic compensation is selected. This message may be temporarily displayed if the instrument is turned too fast. The input data exceeds the allowable range.

Excess data

Mismatched Target
This message is displayed if a long distance which is a far beyond measurable distance of V-227N is measured with a wrong target mode. lease select a correct target then measure. If a wrong target is selected, a correct distance cannot be measured. The measurement distance is less than 1.5m in Prism mode. Under too strong sun light. Unstable light value owing to shimmer or obstacles. Target,Prism do not face the instrument. Target,Prism are not correctly sighted. Measurement range is over in Reflectorless mode. Sufficient signal does not return by sighting sharp edge etc. at Reflectorless mode.
Target is too close. Unsuitable Condition
Select a longer point, or use a tape measure. Change the object that has much better reflectivity, or use a prism, or wait until the sun activity has weakened.

Error Message

EDM ERROR 04 -05, 34-39, 50-53 ETH ERROR 70-76 MEMORY ERROR 19 ERROR PS DATA of EDM ERROR P DATA of EDM ERROR ETH DATA
Distance measurement system problem Angle measurement system problem Memory problem Problem of the internal EDM parameters

Turn the power off, and then turn on again. Repair is needed when the message appears consistently.
Problem of the internal ETH parameters
V200Quick01-07Aug2p17.pdf

11:18:06

4. Specifications V-227 N V-227
Telescope Magnification 30 x Resolving power 3 Field of view 2.6% (1 30) Minimum focus 1.0m Focus Manual Distance measurement Laser Class Visible Laser: Class II (2) Measurement range (Good condition) Reflectorless 1.5m 90m Mini prism 1.5m-800m (1100m) 1.5m-600m (900m) 1P 1.5m-1400m (1900m) 1.5m-1000m (1300m) 3P 1.5m-1900m (2400m) 1.5m-1300m (1600m) Accuracy Prism (3+2ppm x D)mm Reflectorless (5+2ppm x D)mm Measuring time Repeat meas. Normal:Prism 2.0sec.(1mm) Track: Prism 0.4sec.(1cm) Angle measurement Measuring method Absolute rotary encoder Minimum count 5 (10cc) /10 (20cc) selectable Accuracy(ISO17123-3) 7 Compensator Single axis Sensitivity of vials Plate level 40/1div. Circular level 8/2mm Dimensions/Weight Instrument 172(W) x 343(H) x 177(L)mm Weight (incl. Battery) 5.4kg Battery pack BP02 Power source Ni-MH (Rechargeable)(4300mAh) ,DC6V Continuous Approx.5 hrs (ETH+EDM),12 hrs (ETH) with Approx. Operation time

2.2 hrs of charging time

Internal Memory Coordinates data Others Data communication Water resistant Ambient temperature Tripod thread Charger BC03 and AC Adapter AC01 Base Plummet
6000 points RS-232C IP44 (instrument only) -20C ~ +50C / -4F ~122F (Working range) 5/8 x 11 Input voltage (AC01) :100~240V Output voltage (BC03) :DC7.5V Detachable Optical
NOTE: * The measurement range may vary by measurement conditions. * Normal conditions: 20km visibility with slight shimmer. * Good conditions: 40km visibility, overcast, no heat, no shimmer and moderate wind. * EDM Measuring time varies according to distance to be measured and conditions of the environment. * The operating time becomes shorter under the low temperature, due to the temperature dependence of the battery performance. * The points that can be recorded in one job file are maximum 2,000
measuring points(XYZ).The user can make up to 8 job files.
NOTICE TO THE USER OF THIS PRODUCT

To assure compliance with the Safety standard 21 CFR, Chapter 1. Subchapter J. The U.S. bureau of Radiological Health requires the following information to be provided to user.: It can be dangerous to look into the beam with optical equipment such as binoculars and telescopes.
1. Specifications of Laser Radiation A) The EDM module of the V-200 produces a visible light beam, which is emitted from the telescope objective lens and the center hole of the instrument base plate. The V-200 is designed and built to have a laser diode radiating at 620-690nm. Radiant power The V-200 is designed and built to radiate a maximum average radiant power of 0.95mW from the telescope.The user may be subject to this radiation as a beam while operation until such time that the instrument is turned off.
2.The following labels are affixed to and must remain attached to this laser product. A) The following Certification label is located near the Plate level: This laser product is complied with the provisions of 21 CFR 1040. 10 and 1040.11. For a Class II laser product. Caution label is located near the exit aperture: AVOID EXPOSURE.Laser radiation is emitted from this aperture. Warning logotype is located on the surface of the telescope: CAUTION LASER RADIATION DO NOT STARE INTO BEAM Warning label is Located near the exit aperture.
3.Caution to maintain the safety in compliance with the standard A) To maintain the safety standard, refrain from any operation, maintenance, or adjustment other than described in this instruction manual. Operation, maintenance or adjustment other than those specified in this instruction manual may result in hazardous radiation exposure. Maintenance and repair not covered in this manual must be done by an authorized Pentax dealer.
The Laser beam emission by the Distance measurement can be terminated by pressing [Meas] or [ESC]key.
Laser beam is transmitted from this aperture

Aperture label

Warning label
V-227N V-227 Identification label
LED is turned on at the time of emission

Warning logotype

Power Topo Express

Operating Procedure

5. Starting Special Function
MODE A SCREEN PowerTopoExpress MAIN MENU
6. Creating / Selecting a Job File To create a new job file:
PowerTopoExpress MAIN MENU input a new job name by using

Or to select a job file:

PowerTopoExpress MAIN MENU
select a job file by using
NOTE: Once a job file is created or selected, it is effective until a new job file is created or another job file is selected.The default job file "PENTAX" is provided permanently so that data is stored even
when no user defined job file exists.The points that can be recorded in one job file are maximum 2,000 measuring points(XYZ).The user can make up to 8 job files.
7. Input a Known Point Coordinate To input and store a known point coordinate:
input a Point Name by using

X-Z,PC(point code)

repeat to input value input PC
NOTE: There are other functions in VIEW menu; Graphical View, Edit Rectangular Data, and Edit Polar Data. For detail of these functions, please refer to the instruction manual of PowerTopoExpress. To input PC (point code):
move cursor to PC select a PC from the list by using
NOTE: PC list is displayed only when point codes are stored in the job named PointColeList. PointCodeListjob can be created by the procedure described in the section 2, and PC can be stored by inputting PN and PC as a point coordinate data. PC list can be also transferred from a computer. For more detail, refer to the instruction manual of PowerTopoLite. A new point code can be input and memorized as a point coordinate data, but it is not stored as the data of PointCodeList. If a new PC need to be added to the list, select PointCodeList job and add a PC as a new Rect.Coord.Data.
8. Rectangular Coordinate Measurement
PowerTopoExpress MAIN MENU STATION POINT SETUP
x2 8.1 Station Point Setup To select from the memory:
select the point by using

H.ANGLE SETUP

Or to input the station point information:
X-Z,PC(point code) SAVE or H.ANGLE SETUP repeat to input value input PC SAVE
NOTE: The input item (cursor position) may be selected by
To input PC (point code):
select a PC from the list by using move cursor to PC
NOTE: Input items are PN (point name), X, Y, Z, IH (instrument height), and PC (point code). If the inputted PN already exists in the memory,then the corresponding point information (coordinate & point code) is displayed in the screen. The result of Free Station, prior to stakeout, is automatically set in the each field of Station Setup. 8.2 Orientation (Station Point H.Angle Setup) To input a given angle:

input value by using MEASUREMENT SCREEN

Or to set the angle 0:

MEASUREMENT SCREEN
Or to calculate by the Back Sight Point:
input value or select from the list

aim Back Sight Point

8.3 Measurement To select the Target type: (V-227N models only)
Repeat Until the desired target type is selected
NOTE: You can check the selected target type at the left side of the Battery mark in the top line of the screen.

To measure:

Or to start tracking: x2 NOTE: Shot count can be changed by using To input the point information: select by
input value by using RETURN TO THE MASUREMENT SCREEN input PC SAVE
To save the point information:

( next measurement )

Or to measure and save:
NOTE: The Point number is automatically incremented or decremented to make rapid continuous measurements possible. 8.4 Offset Measurement For Radial Offset (the horizontal distance offset along the line of measurement):
MEASUREMENT SCREEN input value by using RETURN TO THE MASUREMENT SCREEN

For Tangential Offset:

For Distance Offset (slope distance):
NOTE: The Offset values are cleared once the measurement is saved. 8.5 Remote measurement To enter the Remote mode:
RETURN TO THE MEASUREMENT VALUES ARE UPDATED BY TURNING THE TELESCOPE

select by

input value by using

input PC

REMOTE MODE MEASUREMENT VALUES ARE UPDATED BY TURNING THE TELESCOPE
NOTE: Remote values are calculated based on the assumption of the reference plane. Three types of the reference plane are available in PowerTopoExpress; Cylindrical surface, Fixed plane (default) and Rotated plane. To change the reference plane type:

Select by

To quit the Remote mode:
X2 9. Polar Coordinate Measurement
PowerTopoExpress MAIN MENU POLAR CORRD.
9.1 Station Point Setup To input the point information:
H.ANGLE SETUP repeat to input value or confirm ppm
NOTE: Input items are PN (point name), IH (instrument height),PC (point code), TEMP (temperature), PRESS (atmospheric pressure) and ppm. "TEMP" and "PRESS" can be input only when "Atmospheric Correction" is set to "ATM INPUT"."ppm" can be input only when "Atmospheric Correction" is set to "ppm INPUT".The input item (cursor position) may be selected by
9.2 Orientation (Station Point H.Angle Setup) Only when the orientation of the horizontal angle is required, proceed according to the following procedure.Otherwise, just pass this step by

To input a given angle:

select Start Point from the list
select End Point from the list MEASUREMENT SCREEN
9.3 Measurement To select the Target type: (V-227N models only)
Or to start tracking: x2 NOTE: Shot count can be changed by using To input the point information:
input value by using RETURN TO THE MASUREMENT SCREEN input PC
NOTE: The point number is automatically incremented or decrimented for rapid continuous measurements.
9.4 Offset measurement For Radial Offset (the horizontal distance offset along the line of measurement):
NOTE: The Offset values are cleared once the measurement is saved.

10. Free Stationing

input Inst.Height (IH) by using KNOWN POINT SETUP
X3 10.1 Known Point Setup To select from the memory:
Or input PN which is already stored in memory to call and display the known coordinate 10.2 Measurement Select the target type and measure:
Repeat Until the desired target type is selected (V-227N models only)
NOTE: You can check the selected target type at the left side of the Battery mark in the top line of the screen. To proceed to the next point:

KNOWN POINT SETUP

Repeat "Known Point Setup" and "Measurement" for all known points.

10.3 Calculation

MEASUREMENT SCREEN input a Point Name by using select Point Code from the list or input
NOTE: The result of Free Station is automatically carried forward to the station setup of Rectangular coordinate measurement and stakeout. 11. Stake Out
X4 11.1 Station Point Setup Select from the stored data:
Or input PN which is already stored in the memory to call and display the known coordinate NOTE: The result of Free Station, prior to stakeout, is automatically set in the each field of Station Setup.
11.2 Orientation (Station Point H.Angle Setup) To input a given angle:
input value by using STAKEOUT COORD.SETUP

STAKEOUT COORD.SETUP

11.3 Stakeout Point Setup Select the point from the stored data:

STAKEOUT MEASUREMENT

11.4 Stakeout Measurement Check the designed value, and press to proceed to the Stakeout screen. Turn the instrument until "DH. Angle" reads to "0". Select the Target type:
NOTE: You can check the selected target type at the left side of the Battery mark in the top line of the screen. To measure in Tracking mode: (move the target until DH.dist reads 0) x2
To quit measurement (position the target accurately)
To confirm the position of the stake:

Input PN, PH and PC

RETURN TO STAKEOUT MASUREMENT SCREEN

To proceed to the next point:
(repeat from Stakeout Point Setup)
12. Stake Out (Point to Line) "Point to Line" gives the distances between SOP and Int.P,A and Int.P,B and Int.P.
12.1 Station Point Setup Select the point from the stored data:
NOTE: The result of Free Station, prior to stakeout, is automatically set in the each field of Station Setup. 12.2 Orientation (Station Point H.Angle Setup) To input a given angle:
input value by using POINT A SETUP

POINT A SETUP

12.3 Point A Setup To input values:
X-Z,PC(point code) SAVE or POINT B SETUP
repeat to input value input PC SAVE
Or to select from the memory:

POINT B SETUP

12.4 Point B Setup To input values:
X-Z,PC(point code) SAVE or MEASUREMENT

MEASUREMENT

12.5 Point To Line Measurement To select the Target type:
To measure in Tracking mode: (move the target to the desired position) x2

13. INVERS

X3 To input SP (Station point):
X-Z,PC(point code) SAVE or

Input End point

repeat to input value input PC RESULT SCREEN
14. Area Calculation To start area calculation:
select points of the polygon by repeating select

RESULT SCREEN

To return to the calculation menu screen:
RESULT SCREEN CALCULATION MENU SCREEN
NOTE: This function calculates the length of 2D contour of a p o l yg o n , a n d t h e 2 D s u r f a c e ( a r e a ) o f t h e p o l yg o n. The polygon is defined by selecting points in such a way that the contou r segments of th e pol ygon d o not intersect. The last selected point is automatically tied to the first selected point to form the closed figure. There are several function keys for point selection, such as "ALL", "FIND PN", FROM", "TO", and "ORDER". Refer to the instruction manual on the CD-R.

15. REM To start REM:

X3 Measure the Reference point:
input prism (or reference) height
Measure the elevation of the remote point:
aim the point to be measured
REM VALUE IS DISPLAYED AT THE BOTTOM OF THE SCREEN
To return to Calculation menu:

CALCULATION MENU SCREEN

16. RDM (Remote Distance Measurement) To start RDM:
PowerTopoExpress MAIN MENU MEASURE THE REFERENCE POINT
X2 Measure the Reference point:
input the target height by
(select target if necessary)
Measure the 2nd point (Target Point):
RESULT SCREEN DISTANCE FROM THE REFERENCE POINT
Measure the 3rd point (Target Point):
RESULT SCREEN DISTANCE FROM THE REFERENCE POINT RESULT SCREEN DISTANCE FROM THE PREVIOUS TARGET POINT
RESULT SCREEN DISTANCE FROM THE PREVIOUS TARGET POINT
(repeat reference point measurement)
To return to PowerTopoLite Main menu:
RESULT SCREEN PowerTopoExpress MAIN MENU

Preference List Item

Language COORD.AXIS DISP.2 DISP.3 DISP.1 AXIS RIGHT ANGLE, HEIGHT BASE DIRECTION, HEIGHT
BASE DIRECTION, RIGHT ANGLE

Default

ENGLISH DISP.1 Y Z BASE RIGHT ANGLE HEIGHT CW CCW each axis. Any alpha-numeric character line, and 3rd line Orientation direction of Any alpha-numeric character displayed in 1st line, 2nd X Any alpha-numeric character Axis labels that are Your Language

Options

Remark
DISP.2 AXIS DISP.3 AXIS ROTATION
INPUT METHOD DIVIDED TEMPLATE, MATRIX STRUCTURE TYPE ACTION METHOD PROCESS TYPE FULL TEMPLATE REMOTE METHOD COMPARE METHOD REQUEST AIMING OFF AVE.ELEV 0m 1.0 OFF SCALE DUPLICATE PN CHK ON -9999.999m - +9999.999m 0.00000001 - 1.99999999 ON ELEV. FACTOR

ALL IN ONE INFO.

Direction of H.angle measurement
Operational procedure type

FIXED PLANE

CYLINDER FACE, ROTATED PLATE

LARGE CHARACTER

Stake Out screen "AIM" message ON/OFF

PAG46 QG V-200

15-09-2006

Function List

FILE MANAGEMENT INFORMATION CREATE DELETE ALL CLEAR MEASURE RECTANGULAR COORD. POLAR COORD. VIEW&EDIT GRAPHICAL VIEW CREATE THE RECT.POINT EDIT THE RECT.DATA EDIT THE POLAR DATA FREE STATION STAKEOUT STAKE OUT POINT TO LINE CALCULATION INVERSE 2D SURFACE REM RDM TRANSFER RECEIVE DC1 RECT.DATA CSV ExtCSV SEND RECT.DATA DC1 CSV ExtCSV SEND POLAR DATA DC1 AUX COMMUNICATION RECEIVE SETUP RECT.DATA SEND RECT. DATA SEND POLAR DATA PREFEREMCE LANGUAGE COORD.SYSTEM INPUT METHOD ACTION METHOD REMOTE METHOD COMPARE METHOD REQUEST AIMING ELEV.FACTOR DUPLICATE PN CHK

V-227N Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
V-227 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

Pagina 2

Japan Surveying Instruments Manufacturers Association
Member symbol of the Japan Surveying Instruments Manufacturers Association representing the high quality surveying products.
Total Construction Solutions

082006 V200-Q01A

Printed in Belgium