Material Handling Equipment

Electric Stackers EHH

COMPACT MOUNT EHH 1209
Manual drive and electrical lifting Designed for the high-performance handling of normal and wire-mesh pallets, the COMPACT MOUNT high-lift pallet trucks electrically-operated lifting system with control handle makes light work of raising items weighing up to 1.2 tons to a maximum height of 900 mm. Constant lowering speed is provided by a braking valve system, while a pressure control valve guards against possible overloading and a covered lifting chain prevents operator injuries. Driving safety is provided by a two-sided step-synchronized steering mechanism with variable lock, which maintains optimum wheelbase dimensions at all times. This compact and highly functional unit is an ideal tool for efficient logistics and safe load handling. Items supplied as standard: Specially hardened axles, hard-chrome plated piston rods Polyurethane steering wheels, nylon load wheels Hydraulic unit fitted with electrically-actuated release valve Built-in 12 V/88 Ah battery and charger unit Battery level and charging indicators Access to battery compartment from top of unit Safety feature pack: Emergency OFF switch Fixed end-stop for vertically-positioned steering handle Conforms to European Union directive 86/663/EEC, German accident-prevention regulation VBG 12b and EU directive 89/240/EEC (covering stability) Wheel lock Electronically-imposed shutdown while batteries are being charged
Diagram and chart see page 31 EHH 1209
CLIMBER EHH 1216, EHH 1030
Manual drive and electrical lifting The specializations of our CLIMBER series of electric stackers with their different load-capacity and lifting height configurations is the various requirements posed by goods-vehicle loading and unloading tasks. Whether you opt for a maximum height of 1.6 m and lifting capacity of 1.2 tons, or a three-meter/one-ton configuration, the choice is yours with respect to the safe, functional COMPACT MOUNT unit. You can only benefit from the long efficient service life that the robust construction of the CLIMBER provides along with specially hardened axles, maintenancefree bearings, hard-chrome plated piston rods and the fixed end-stop for the vertically-positioned steering handle. This reliable, easy-to-handle unit is your constant assurance of reliable load-lifting and lowering functions, while not just conforming to major official directives but also matching your own individual way of working. Items supplied as standard: Built-in battery 12 V/88 Ah and charger unit Battery level and charging indicators Access to battery compartment from top of unit Hydraulic unit fitted with electrically-actuated release valve Polyurethane steering wheels, nylon load wheels Optimized maneuverability thanks to two-sided stepsynchronized steering mechanism with variable lock Constant optimum wheelbase dimensions Lowering-brake valve system Safety feature pack:

EHH 1216, EHH 1030

Corresponds to European Union directive 86/663/EEC, German accident-prevention regulation VBG 12b and EU directive 89/240/EEC (covering stability) Wheel lock Emergency OFF switch Electrically controlled shutdown while batteries are being charged Covered lifting chain Pressure control valve Parking brake

Type EHH 1209/1216/1030

Batterycut-off switch Tandem wheel optionally

Lifting

Parking brake
Type Art. No. Lifting capacity up to 2,5 m lifting height in t Residual carrying capacity in t Steering-/load wheels* Wheel size front in mm Load wheel size rear in mm Number of wheels front/rear Height of lifting system, retracted in mm Load center in mm Free lift in mm Lifting height in mm Height of lifting system, extended in mm Wheelbase in mm Fork height max. in mm Fork height lowered in mm Total length in mm Headlength in mm Total width in mm Fork length in mm Fork width x height in mm Carrying fork width in mm Floor/ground clearance in mm Aisle width for euro pallets in mm Turning radius in mm Lifting speed loaded/unloaded in m/s Lowering speed loaded/unloaded in m/s Lift motor rating in kW Battery according to DIN 43531 Nominal battery voltage in V/Ah Battery charger in V/A Weight incl. battery in kg * Polyurethane (PUR) , Polyamide (PA) h1 c h2 h3 h4 y h3+h13 h13 L1 L2 B l exs b1 m1 Ast Wa

Manual & Electric Winch Catalogue
Including Cranks & Pulleys
Technical Product Specification

WHO ARE WE?

Pfaff-silberblau Ltd. was formed in 1983 as the UK subsidary of Pfaff-silberblau GmbH & Co of Ausburg in Germany. As part of an international organisation we supply an extensive range of equipment to meet the requirements for lifting and handling of many different types of load. From the outset a well earned reputation for service and quality was gained. Our aim, in everything we do, is to continue and enhance this reputation. Many organisations have taken advantage of the wide range of products and services provided by Pfaff-silberblau Ltd. Our development and growth has continued and in September of 1999 we were awarded ISO 9002 certification, and we are currently progressing towards ISO 9001:2000. Pfaff-silberblau GmbH & Co, our head office and manufacturing base in Germany has ISO 9001 certification for design and manufacture. We pride ourselves on the prompt delivery of high quality equipment to a wide range of customers who benefit from the knowledge and experience of our staff. Our staff are happy to help on any matter from technical specification to advice on the latest regulations or safe use of lifting and materials handling equipment. We offer full training on all of our products. This can either be in house or at your premises.
If you need to lift, turn or move any load, you only need to make one decision- Pfaff-silberblau.

CONTACT DETAILS

Sales Telephone: +44(0)151-609-0099 Fax: +44(0)151-609-0852 e-mail: sales@pfaff-silberblau.co.uk Admin Telephone: +44(0)151-609-1900 www.pfaff-silberblau.co.uk

SALES OFFICE CONTACTS

Joanne Durnford Roy Thomson Tracy Hall Paul Kelly jo@pfaff-silberblau.co.uk roy@pfaff-silberblau.co.uk tracy.h@pfaff-silberblau.co.uk paul@pfaff-silberblau.co.uk

OPENING HOURS

Monday - Friday 9.00am - 5.00pm Minimum order charge 25.00 excluding carriage and VAT. We use various methods of delivery and can deliver on either 2/3 day or next day service with before noon and before 10.00am service available. All agreed returns are subject to a 15% handling charge with a minimum of 25.00. A returns note is required before goods can be returned.

HOW TO FIND US

Our premises are situated at junction 3 of the M53 Motorway.

CONTENTS

Contact Details Contents Hand Winches - General Information AG Hand Winch - Wall mounted hand winch SW-W Alpha Hand Winch - Wall mounted, spur gear wheel winch SW-W (SG) Hand Winch - Wall mounted spur gear winch SW-WBR (KG) Hand Winch - Wall mounted with controlled lowering facility SW W-SGO (WG) Hand Winch - Wall mounted worm gear winch SW W-SGG (WB) Hand Winch - Wall mounted worm gear in oil bath SW W-SGG WB Hand Winch - Wall mounted worm gear winch to BGV C1 (VBG 70) specification LB Hand Winch - Column or base mounted spur gear winch LB Hand Winch - Stainless steel spur gear winch QW Hand Winch - Floor or wall mounted spur gear winch SW-KAL (CG) Hand Winch - Compact worm geared winch SWK Gamma/AL Hand Winch - Two speed operation winches SWK Lambda BVGC1 (VBG70) Specification winch Beta Electric Winches - Heavy duty electric winch Beta BGV C1 / VBG 70 Electric Winch - With special safety features Wire Rope Pulleys Braked Safety Cranks Drives Calculating Fleet Angles Calculating Loads Drive Group Order Form
7 8/17 18/19 20/21 22/23/30
HAND WINCHES - GENERAL INFORMATION
Our extensive range of industrially rated hand winches solve lifting problems in most engineering, construction, industrial, marine, hospital, theatre, entertainment and general installations. With over 46 models available, including the lighweight AG for shutters and washing lines, the multi-purpose SG, to the heavy duty WB for theatres, we can supply you with the winch to meet your needs. As well as our standard range, we can supply you with many specials to meet even the most unusual requirements. All our winches are rated on the first rope layer in accordance with DIN standard 15020 Part 1. Details from this standard are shown on page 29 to assist you in the selection of suitable equipment to meet your specific requirements.

Hand Winch Type AG

Lifting capacity 45 Kg or 100 Kg. Hand operated winches designed for use in raising blinds, shutters, clothes lines and chandeliers. The AG has a solid build quality with die-cast construction, corrosion resistant internal parts and powder coated paint finish. Suitable for wall mounting.

Specifications

Lifting capacity 1st layer Wire rope diameter Wire rope capacity Ratio Average lift per turn of crank Effort required Weight Kg mm m

12 1:15 1

8 3:8 2

mm Kg Kg

Dimensions
A B C D E F G H J K L M N (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 103.180 83.5
HAND WINCH TYPE SW-W ALPHA
Lifting capacity from 300 Kg to 1.0 t The Alpha winch is a lightweight, robustly constructed winch. It offers a high degree of safety with a load pressure brake, which prevents unintentional lowering of the load. All components are zinc plated , while the spur gear ensures high efficency. Rope outlet usable in any direction.

Options:

Crank with adjustable radius. Folding handle.
Lifting capacity 1st layer Lifting capacity last layer Drive group DIN 15020 Wire rope diameter Wire rope capacity - 1st layer Wire rope capacity - Total Number of layers Average lift per turn of crank Effort required Weight Kg/t Kg/t mm m m mm Kg Kg

1Em 5 1.13 10

1Em 10

1Em 16

1.0t 360 1Em 16
A B C D E F G H I J K X () (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 200 58.6 109.250 58.6 109.250 92.92.13
HAND WINCH TYPE SW-W (SG)
Lifting capacity from125 Kg to 750 Kg. These spur gear hand operated winches are compact, unobtrusive and suitable for many lifting applications. Light weight. Smooth running. Mounting is possible in every position. 125Kg winch is aluminium with: Load pressure brake, removable crank, silent running. Steel design with spur gearing lifting capacity from 300 Kg to 750 Kg. With spring loaded safety crank and folding handle.

710 08

710 01
Lifting capacity 1st layer Lifting capacity last layer Crank design Drive group DIN 15020 Drum diameter Drum width Wire rope diameter Wire rope capacity 1st layer Wire rope capacity total Lift per crank turn Required effort Weight Kg Kg Kg mm mm mm m m mm Kg Kg

Std. 1Em 13 3

Sifeku 1Am 5 2.10

Sifeku 1Bm 6 2.11

Sifeku 1Bm 20 11
A B C D E F H I J K L M O P (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 290 14.14.14.50 192

300-750Kg 125Kg

710 19

711 36

300-750 Kg
HAND WINCH TYPE SW-WBR (KG)

Lifting capacity from 300 Kg to 1.5 t. A range of wall mounted winches with a special controlled lowering facility and adjustable crank radius. Controlled lowering by pushing the handle in the lowering direction allowing the winch to pay out at a controlled speed. A centrifugal dynamic brake is incorporated to control speed and to prevent the operator from losing control of the load. This is enhanced by a load-activated brake, which allows the operator to stop and hold the load securely in any position. The braking system also prevents the winch handle from re-coiling, protecting the operator and the load. Fully enclosed gears make this winch ideal for use in adverse conditions.
Lifting capacity 1st layer Lifting capacity last layer Drive group DIN 15020 Wire rope diameter Wire rope capacity 1st layer Wire rope capacity total Number of layers Ratio Average lift per turn of crank Effort required Max lowering speed Weight Kg/t Kg/t mm m m

mm Kg m/min Kg

1Bm 5 4.8 42.5.15:10.34

1Bm 6 5.2 67.7.15:15.50

1t 740 1Bm 9 6.1 15.18:16.87
1.5t 1.09t 1Bm 11 5.4 13.22.5:20.110
Drum Dia Drum Length Drum Flange A B C D E F G H K L M N O (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 402 105
HAND WINCH TYPE SW W-SGO (WG)
Lifting capacities 250 Kg to 5.0 t Worm gear drive. Fabricated steel frame. Suitable for wall mounting. Machine cut worm wheel and shaft, mounted on bearings. Two speed operation on 2.0, 3.0 and 5.0 tonne winches by displacement of crank. Removable crank with adjustable radius on 0.25 - 1.5 tonne winches.

Options - see page 9

Multi compartment winch. Zinc plated protection. Grooved drum.
Lifting capacity 1st layer Lifting capacity last layer Drive group (DIN 15020) Rope diameter Rope capacity 1st layer Rope capacity total Number of layers Ratio Lift per crank turn Required effort Weight Kg/t Kg/t mm m m

1EM 5 3.5 10:8 13

1EM 6 4.9 12:9.6 16
1.0t 490 1EM 9 5.7 26:13.7 26
1.5t 792 1EM 10 5.6 26:20.6 28
2.0t 3.0t 5.0t 1t 1.85t 2.99t 1EM 1EM 1EM 20 5.0 5.6 5.42.7 42.76/38:1 104/52:1 120/60:1 11/21 8/16 9/18 9/18 12/24 25/78 105

250Kg-1.5t

A B C D E F Max G H J K L M N O P (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 410 81.107 48.87.101.185 101.165.200 219.138
HAND WINCH TYPE SW W-SGO (WG) - OPTIONS

Chain Wheel Drive

Electro - Zinc Plated

Multi Compartment Drum

Grooved Drum
HAND WINCH TYPE SW W-SGG (WB)

Lifting capacity from 250 Kg to 750 Kg These hand operated worm gear winches are of cast iron construction with the gears enclosed in an oil-bath - with automatic lubrication - this ensures smooth operation. NB. Oil not supplied. Suitable for wall mounting. Enclosed construction. Self- locking automatic friction type brake ensuring load and operator safety. A hardened worm shaft gives prolonged operating life. This winch has an adjustable crank radius, which is useful for operation in confined space or for light load speedy cranking.
Extended drums Multi compartment winches Grooved drums Alternative mounting positions are possible with the use of a grease lubrication kit.
Lifting capacity 1st layer Lifting capacity last layer Drive group to DIN15020 Drum diameter Drum length Wire rope diameter Wire rope capacity 1st layer Wire rope capacity total Lift per crank turn Required effort Weight Kg Kg mm mm mm m m mm Kg Kg

1Bm 5 4.8 11.9.2 12.5

1Bm 6 7.9 29.14.5 21

1Bm 8 9.42

A B C D F G H J K L M N O P (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 20 390
Lifting capacity from 250Kg to 600Kg
TO BGV C1(VBG 70) SAFETY STANDARD
These hand operated worm gear winches are of cast iron construction with the gears enclosed in an oil-bath - with automatic lubrication - this ensures smooth operation. NB. Oil not supplied. With grooved rope drum Rope is held on one layer Equipped with rope pressing device to maintain tension With two independent brakes each capable of stopping the load. Alternative mounting positions are possible, with the use of a grease lubrication kit in place of oil lubrication
Hand crank with foldable handle Multi-rope operation
Lifting capacity 1st layer Drum diameter Drum length Wire rope diameter Wire rope capacity 1st layer - maximum Lift per crank turn Required effort Weight Kg mm mm mm m mm Kg Kg 3.9.2 12.8 5.14.7.16 40
A B C D F G H J K L M N O P R (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 32

HAND WINCH TYPE LB

Lifting capacity from 350 Kg to 1.3 t. Column or base mounting. Light weight. High efficiency through spur gearing. Smooth-running. All components are zinc plated. Load pressure brake prevents unintentional lowering of the load. Enclosed laser cut gears

Options

Free wheeling device. Variable radius crank - with adjustable crank arm. Folding crank. Stainless steel option (see page 13).
Lifting capacity 1st layer Lifting capacity last layer Drive group DIN 15020 Wire rope diameter Wire rope capacity 1st layer Wire rope capacity total Number of layers Lift per crank turn Required effort Weight Kg/t Kg/t mm m m mm Kg Kg

1Em 4 1.25 4.8

1Em 6 1.22 7.3

1Em 7 0.24 10

1.3t 480 1Em 7 1.24 12.1
A B C D E F G H K L M N O P Q R (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 63.170 63.240 63.50

650-900Kg

350Kg 250Kg

Stainless Steel Design

See page 13 for 650Kg - 1.3t drawing

STAINLESS STEEL TYPE

Lifting capacity 250kg, 650kg and 1.0t. Column or base mounting. Light weight. High efficiency through spur gearing. Enclosed laser cut gears. Smooth-running. Corrosion-resistant - Stainless Steel. Load pressure brake prevents unintentional lowering of the load. Suitable for outdoor use.
Lifting capacity 1st layer Lifting capacity last layer Drive group DIN 15020 Wire rope diameter Wire rope capacity 1st layer Wire rope capacity total Number of layers Lift per crank turn Required effort Weight Kg/t Kg mm m m mm Kg Kg

1Em 6 1.22 7.6

1.0t 360 1Em 7 1.24 12.1

1Em 4 1.8 19.4.8

A B C D E F G H K L M N O P (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 170 63.240 63.291

650Kg - 1.3t

250Kg*
*see page 12 for specification

HAND WINCH TYPE QW

With Free-Wheeling Option
Lifting capacity from 100 Kg to 1.7 t. A range of hand operated spur gear winches suitable for lifting, lowering and pulling applications. To raise a load, simply turn the handle in a clockwise direction. To lower, turn the handle in the opposite direction. The QW winch will only free wheel when unloaded; making it a leader in industrial winch applications. This device can be removed if required. Safe and reliable double-tipped brake pawl. Especially suited for vehicle winch or trailer applications etc.

Multi-Compartment drum.

Lifting capacity 1st layer Lifting capacity last layer Drive group DIN 15020 Wire rope diameter Wire rope capacity 1st layer Wire rope capacity total Lift per crank turn Required effort Weight Kg/t Kg/t mm m m mm Kg Kg

1Em 11.5 7

1Em 9.0 12

1Em 11.0 13

1Em 10.0 19

1.1t 733 1Em 10.0 26

1.7t 1.29t 1Em 15.0 46
A B C D E F G Max H I J K L M (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 276.35 362.60.45 362.57.57.5 403.89.93
HAND WINCH TYPE SW KAL (CG)
Lifting capacity 750 Kg and 1.1 t. The CG hand operated worm geared winches are suitable for lifting and pulling applications in exposed environments. Lifting capacities of 0.75 and 1.1 tonnes on first rope layer. Constructed from die-cast aluminium. Sealed gears ensure constant lubrication and quiet operation. The worm wheel is machined from phosphor bronze and the worm shaft is hardened and has an inherent self sustaining feature. The CG also features teflon coated sintered bearings to reduce effort , prolonging the service life of the winch. When no load is applied the drum free wheels as standard, this feature can be removed if required. Suitable for base mounting. Space saving profile is ideal for installation and operation in confined spaces.
Lifting capacity 1st layer Lifting capacity last layer Drive group DIN 15020 Wire rope diameter Wire rope capacity 1st layer Wire rope capacity total Max. wire rope layers Ratio Lift per crank turn Required effort Weight Kg/t Kg mm m m
Drum on right or left hand side.

1Em 24:22 7.3

1.1t 600 1Em 7 1.3 24:22 7.8
A B C D E F G H J K L M N P Q R (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 80 85
HAND WINCH TYPE SW K/GAMMA/AL
Lifting capacity from 200 Kg to 800 Kg. The design of this hand winch features two-speed gearing on some models with very fast operation. Aluminium construction. Teflon coated sintered bearings to reduce effort with a roller chain drive. Automatic self-sustaining spring loaded brake acting in both directions. Two speeds are available depending upon capacity; for example on the 500Kg winch the fast speed winds in 335mm for each turn of the crank with loads below 90Kg, whilst the slow speed lifts full loads for ease of operator use. Base, wall or ceiling mounting. Removable handle, operates from both ends of the winch. The solution to many winching problems.

Typ 270 e G 004 am ma

Lifting capacity on 1st layer Lifting capacity on last layer Drive group DIN 15020 Wire rope diameter Wire rope capacity 1st layer Wire Rope capacity total Number of layers Ratio Lift per crank turn fast speed Lift per crank turn low speed Effort on crank Weight

Kg Kg mm m m mm mm Kg Kg

1Em 4 3.18 6
500 (90)* 200 (40)* 1Em 6 3.8 6.57:14
800 (90)* 350 (40)* 1Em 7 5.8 7.57:20
* Capacity in brackets indicates fast speed option
A B C D E F G H J K (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 9.146 198

500Kg (AL)

200-800Kg (Gamma)

Typ 270 e G 006 am ma

Typ 270 e A 001 L

HAND WINCH TYPE LAMBDA

TO BGV C1 (VBG70) SAFETY STANDARD
Specially designed for moving loads over people, conforms to German safety standard BVG C1. This winch has a grooved drum and is driven by a single reduction pair of straight cut internal spur gears. The load is automatically held by a safety spring double brake system, each capable of holding the full load. For improved rope coiling, a spring loaded rope pressure drum is fitted. Winding on one layer only. The gearing is designed for double nominal load according to BGV C1 (VBG70).
Lifting capacity on 1st layer Drive group DIN 15020 Wire rope diameter Rope capacity Effort on crank Effort on crank without load Lift per turn of crank Ratio Weight Kg mm m Kg Kg mm Kg

300 2m 50 8,83:1 30

BETA ELECTRIC WIRE ROPE WINCHES
Lifting capacity from 100 Kg to 7.5 t. The Beta Wire Rope Winch has over 500 standard application possibilities. This ensures that we can meet your needs exactly, providing a solution to your individual application. The standard building block Beta is a functional robustly designed unit with a wide range of load capacities, lifting heights and speeds. It can be used for lifting or moving all sorts of loads. The Beta gives precise, safe and repeatable movement.

Features:

The Beta Winch is designed and constructed with maintenance-free spur gearing with milled and ground gearwheels. The gears run in an oil bath, this ensures simple maintenance and a long service life. A feature of the Beta is its quiet running through helical gearing.
Operator and Load Safety:
Electrically released spring-operated disc brake for holding the load. Safe operation through low voltage contactor control (42V) with a separate control panel. Robust motor with flexible supply voltages from 380V - 420V, 3ph, 50 Hz or 440V - 460V, 3ph, 50 Hz. IP54 Motor protection, also available to IP65. Large wire rope capacity with grooved drum with 2 wire rope fastening attachments. Electronic overload protection for all winches above 1000kgs.
Options and Special Designs Available:
Pendant operation with key switch Radio / Infra Red Control Upper & lower limits adjustable geared type Slack rope switch Rope pressure drum 2 speeds or variable speeds Wire rope drum with special size grooves. Extended drums for longer wire rope capacities Single phase motor Winches to BGV C1 German safety standard (further details see page 20/21) Winches for maritime usage available The choice is yours!

Mo tor Pow er (Kw )

Wi re Ro pe Dia me ter Wi (m re m) (m Ro ) pe Cap aci ty 1st lay Wi er re Cap Ro aci pe ty Tot al (m )
Lif 1st ting Ro Capa pe Lay city er Kg Lif /t Las ting C t R ap ope aci Lay ty er Ro Kg /t (m pe Sp /m in) eed

Cla ss/ Du ty

L1 (m m)
BGBG(Compact) 031140145 (Compact) 031140143 (Ergo) BGBGBG031140403 BG031140501 031140505
1.25t 2.0t 800 1.0t 1.0t 1.0t 1.0t 1.25t 1.6t 1.6t 1.6t 2.0t 2.0t 3.2t 4.0t 5.0t 5.0t
825 1.29t 861 1.07t 1.33t 1.33t 1.33t 1.70t 1.70t 2.67t 3.40t 4.56t 4.56t
5.1 3.7 5.1 2.8 5.1 6.0 9.7 19.6 31.5 27.3 9.7 6.0 19.6 6.0 14.5 3.7 3.8 7.1 14.2 29.9 5.2 10.5 5.2 14.2 19.4 25.4 10.5 10.5 5.2 4.2 6.3 3.3 4.9 16.1 27.2 4.9 9.9 20.0 30.8 4.9 6.9 15.0 20.8 9.8 6.9 6.9 4.6 4.6 16.9
0.37 0.37 0.25 0.25 0.37 0.15 0.31 0.46 0.94 0.94 0.46 0.31 0.94 0.31 0.94 0.31 0.37 0.94 0.94 1.88 0.46 0.94 0.46 1.38 1.88 2.75 1.38 1.38 0.94 0.94 1.38 1.38 0.94 2.75 5.00 0.94 1.88 5.00 6.88 1.38 1.88 5.00 6.88 5.00 2.75 5.00 5.00 5.00 13.75
1Bm/25% 1Bm/25% 1Bm/25% 1Bm/25% 1Bm/25% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 1Am/30% 1Am/30% 1Am/30% 1Am/30% 1Bm/25% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 1Am/30% 1Am/30% 1Am/30% 1Bm/25% 1Bm/25% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40% 2m/40%
7.0 7.0 7.0 7.0 7.0 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 16.7 8.7 8.7 7.0 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 17.9 11.5 9.1 10.3 17.2 17.2 17.2 17.2 17.2 17.2 17.2 17.2 25.4 25.4 25.4 19.0 19.0 16.7 21.7 18.6 18.6
46.7 46.7 46.7 46.7 46.7 78.4 78.4 78.4 78.4 78.4 78.4 78.4 78.4 78.4 78.4 58.5 58.5 48.9 86.3 86.3 86.3 86.3 86.3 86.3 86.3 86.3 86.3 86.3 86.3 77.7 64.3 74.2 62.1 62.1 62.1 62.1 62.1 62.1 62.1 62.1 123.0 123.0 123.0 69.8 69.8 63.2 80.7 43.8 43.8

1632 1832

930 1030

242 242

174 other models are available - Please contact us with your specific requirements Detailed drawings available on request

L2 (m m)

A( mm )

B( mm )

K( mm )
Specifications & Dimensions

ROPE PULLEYS

An extensive range of rope pulleys in capacities from 700 to 5.0 t. Two types are available:1. Pulleys without brackets. Machined steel pulleys with bearings, to suit a wide range of wire rope diameters and loads. 2. Rope pulleys with brackets, machined, cast iron or steel pulley wheel with bearing mounted into a Zinc plated bracket assembly.
TYPE 1A - WITH BRONZE BUSH
Cast iron with bronze bush for assembly into brackets.

Cap aci ty Kg /t

033460002 033461009
500 1.0t 2.0t 3.0t 5.0t 8.0t

250 310

210 260

6 6.14

ROPE PULLEYS - DSR

TYPE 1B - WITH BEARING

D1 (m m)

D( mm )

033447214
1Bm 2m 4m 2m 1Am 2m 1Am 3m 3m 2m 1Am 3m 2m
1.1t 1.1t 1.1t 2.3t 2.3t 2.5t 2.5t 2.5t 2.5t 5.0t 5.0t
800 1.6t 1.6t 1.8t 1.8t 1.8t 1.8t 3.8t 3.8t
6004zz 6004zz 6205zz 6205zz 6205zz 6306zz 6306zz 6208zz 6208zz 6208zz 6208zz 6310zz 6310zz
2,2 2,2 2,7 3,2 3,7 4,2 4,8 5,3 6,0 6,5 7,0 8,6 9,7

R( mm )

Ro pe
gro up Cap aci Ro ty pe K Div g/t ers ion Cap 90 a Ro city pe Kg Div /t ers ion Bea rin g
R( mm ) Ma xR dia op (m e m) We igh t (K g)

dB (m m) dN (m m)

D1 (m m) dL (m m)

b1 (m m)

IN (m m)

b( mm )

0.6 0.9 1.7 3.10

WITH BRACKET

TYPE 2 - WITHOUT BUSH
Simple inexpensive design for use with manual winches only. Material - cast iron with plain bearing and grease nipple. Complete with fixing bracket.

033418006

Cap aci ty Kg /t Cap aci Ro ty pe Div 90 ers ion Wi re Dia Ro me pe ter (m m) We igh t (K g)

3-6 6-8 8-12

2.5 5.5 12.5

WITH BRACKET TYPE 3

Simple design for use with manual or electric winches. Material - cast iron with bronze bush. Complete with fixing bracket designed to maintain rope in the pulley grooves.

033420009

Cap a Op city era Ha tio nd nK g/t Cap aci Kg ty /t 9 Ele 0 ctri rop c O e D per Cap ive ati aci rsio on Kg ty n /t 1 Ele 80 ctri ro c O p pe Wi Div erati Dia re Ro ers on me pe ion ter (m m) We igh t (K g)

h( mm )

d( mm )

f (m m)

g( mm )

a( mm )

e( mm )

c( mm )

1.0t 1.5t 2.0t 3.2t 5.0t

630 1.0t 1.25t 2.0t 3.2t

1.0t 1.6t 2.5t
3-4 4-5 5-6 6-8 8-10 10-12 12-14 14-16 16-20
1.30 1.84 3.06 5.70 10.00 15.30 24.30 46.00 87.00

9 11.5 11.33

i (m m)

H( mm )

G( mm )

E( mm )

F( mm )

ROPE PULLEYS - DSRB S

WITH BRACKET TYPE 4
Machined steel pulley with a bearing mounted into a fabricated bracket assembly.
D( mm ) Ro pe ( mm ) Dm Cen (m tre m) of wir Dg Cen (mm e tre ) of wir e Cap aci Ro ty pe Div Kg/t ers ion Cap 90 aci Ro ty pe Kg Div /t ers ion Bea rin g

K( mm ) L( mm )

B( mm ) C( mm )

033447114

9/9 9/9 11,5/13 11,5/13 11,5/13 13,5/15 13,5/15 18/20 18/20 18/20 18/20 26/30 26/30

S( mm )

D1 (m m) H( mm )

BRAKED SAFETY CRANKS

A range of safety cranks used on hand driven mechanisms which require a brake e.g. specially designed jacks or winches.

SIFEKU TYPE

Cast aluminium crank with folding handle. Spring operated load pressure brake is silent in operation and weather-resistant, no ratchet required. 250mm radius, for use on jacks up to 5 tonnes capacity.

Features

250mm Crank Length. Square drive: 17mm. Max. driving torque: 60Nm (braking torque). Also available - brake hub unit without crank, e.g. for shaft driven equipment.

SIKU TYPE

This crank is used with a double acting pawl assembly and is suitable for indoor applications. The crank is of cast steel with folding handle and incorporates two conical or nylon brass brake discs, dependant on duty, which act as a friction brake. Two versions are available both with 17mm square hole. With folding handle.
250mm Crank Length. Square drive: 17mm. Max. driving torque: 60Nm (braking torque). 300mm Crank Length. Square drive: 17mm. Max. driving torque: 120Nm (braking torque).

RAKU TYPE

Similar to the SIKU crank this unit has a selector unit which allows either the raise or lower positions to be selected. The crank can either be turned through 360 degrees (as the SIKU crank) or operated in short ratchet type movements which is especially suited for use in confined spaces. With folding handle.

DRIVES

HAND OPERATED GEARBOX
Easy and safe operation. Load is held securely due to self locking worm gear. Self locking. Can be used: As a rotary actuator. As a gearbox for cable winches. As a gearbox for chain drives.

TYPE S20

With cast iron housing mounted into a rolled section fixing bracket. With machined worm wheel and hardened worm shaft running on bronze bushes.

TYPE S24

With diecast aluminium housing suitable for use in hostile environments. Machined Phosphor Bronze worm wheel and hardened worm shaft fitted with teflon sintered bearings to reduce effort.
Type Ratio Driving Torque Effort On Crank Total Shaft Length Shaft Diameter Hole Distance Hole Diameter Weight daN m Kg mm mm mm mm Kg

S20 20:13 5

S24 24:36 135/8
Drawings available on request

CALCULATING FLEET ANGLE

Minimum Distance from Drum to First Sheave or load connection - M

GRADES

SLOPE & GRADE RESISTANCE
(Percent per 100 Horizontal Feet)

95 100

GRADE RESISTANCE
(Kg Pull per Ton to Overcome Grade Resistance)

624 638

Grooved Drum 3 degrees Smooth Drum 1.5 degrees

Drum Length - mm

CALCULATING WINCH LIFTING CAPABILITIES
Since the rope is continuous, from the drum to the attachment point, the load is always 1 tonne, no matter where measured. The head load is the number of line attachments at the head sheave x 1 tonne. All loads shown ignore frictional losses in the system.

One Fall 2t 2t

Two Fall 3t 3t

1t Winch

SWL 1t Three Fall 4t 4t

SWL 2t FourFall 5t 5t

1t 1t 1t

SWL 3t

SWL 4t

DRIVE GROUP

- To DIN 15020 Part 1

RUNNING TIME CATEGORY

(running time per day in hr, related to one year)
Max load occurs only infrequently.

MEDIUM

Low, Average. Max load occurs with roughly equal frequency.
Max load occurs almost continuously.
V006 up to 0.125 V012 over 0.125 - up to 0.25 V025 over 0.25 - up to 0.5 V05 over 0.5 - up to 1 V1 over 1 - up to 2 V2 over 2 - up to 4 V3 over 4 - up to 8 V4 over 8 - up to 15 V5 over 15
1Em 1Em 1Dm 1Cm 1Bm 1Am 2m 3m 4m
1Em 1Dm 1Cm 1Bm 1Am 2m 3m 4m 5m
1Dm 1Cm 1Bm 1Am 2m 3m 4m 5m 5m
If the duration of an operating cycle is 12 minutes or longer, the rope may be graded one drive group lower than the drive group grading determined from the running time category and from the load collective.
Tel - 0099 Fax - PHOTOCOPY/SCAN 2 COMPLETE 3 FAX/POST/EMAIL

Contact

FAX TO:+44 (0)0852

Position Company Address

Postcode Tel Fax E-mail Ext

REQUIREMENTS

Lifting Capacity? Drum Capacity for Wire Rope? Lifting / Pulling / Electric / Hand operated (delete as applicable) What application is it to be used in? (eg Production, Chemical, Marine)
Delivery Required? I require a? Order Number Quote Phonecall Visit Please Order

HAND WINCH

AG Hand Winch SW-W Hand Winch Alpha SW-W Hand Winch (SG) SW-WBR Hand Winch (KG) SWW-SGG Hand Winch (WG) SWW-SGG Hand Winch (WB) WB Hand Winch (BGV C1) LB Hand Winch QW Hand Winch SW KAL Hand Winch (CG ) SWK Gamma Hand Winch/AL SWK Lambda VBG70 Hand Winch

ELECTRIC WINCH

Beta Silverline Beta Proline Beta VBG70

CRANK HANDLES

Siefku Crank Siku Crank Raku Crank

Wire Rope Pulleys

Drives

PFAFF-SILBERBLAU LTD

Sales +44(0)0099 Administration +44(0)1900 Fax +44(0)0852 www.pfaff-silberblau.co.uk e-mail: sales@pfaff-silberblau.co.uk

Electric Chain Hoists

Hand Winches

Material Handling

Electric Winches

Manual Hoists

Moving Equipment
REF: PFAFFWINCH/1104A/1000

Jacking Equipment

We reserve the right to make product alterations without prior notice