Reviews & Opinions
Independent and trusted. Read before buy Philips 1 07E 63!

Philips 1 07E 63

Manual

Download (English)
Philips 107E61, size: 935 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Philips 1 07E 63About Philips 1 07E 63
Here you can find all about Philips 1 07E 63 like manual and other informations. For example: review.

Philips 1 07E 63 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Philips 1 07E 63 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Philips 1 07E 63 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 5. Page 1 of 1. Average Rating:
anzoo 7:47am on Tuesday, August 10th, 2010 
I was looking for a nice pair of 17" monitors and stumbled across the Phillips 107E. Cheap(ish), very short length, good quality Not flat. Large sized screen with great definition and good value for money It is very big and looks a bit clumsy
carlottarosetti 6:57am on Friday, July 30th, 2010 
The price is ok for Philips and I think that it is a very good alternative to higher priced options at the market.
tucana 8:00am on Saturday, June 12th, 2010 
This can be handled by Philips 107E76. Unlike the monitor that I had used, I do not get satisfaction when the work in linux.
dailymess 12:34am on Wednesday, April 14th, 2010 
Good price tag, Bright Screen, High pixels, Easy to adjust doesnt Fit certain speakers
Captain Paralytic 4:17am on Wednesday, March 17th, 2010 
“Sense and simplicity” is the slogan which Philips uses to promote their product and as a customer of few of the Philips electronic goods I feel the s...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

15 No pin Logic ground Identical output - connected to pin 10 Serial data line (SDA) H. Sync / H+V V. Sync (VCLK for DDC) Data clock line (SCL)
Follow the links to see various views of the monitor and its components.

Front View Rear View

file:///E|/Temp/temp/english/107E/product/product.htm (4 of 4) [6/12/2000 4:02:17 PM]

Installing your Monitor

Front View Rear View 6G3B10 Multimedia Base (option) PCUH411 USB Hub (option)

Front View

Power button switches your monitor on. OK button which when pressed will take you to the OSD controls Contrast hotkey. When the UP arrow is pressed, the adjustment controls for the CONTRAST will show up. UP and DOWN buttons are used when adjusting the OSD of your monitor
file:///E|/Temp/temp/english/107E/install/install.htm (1 of 3) [6/12/2000 4:02:17 PM]
Brightness hotkey. When both the LEFT and RIGHT arrows are pressed at the same time, then the adjustment controls for BRIGHTNESS will show up. LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor.

Rear View

file:///E|/Temp/temp/english/107E/install/install.htm (2 of 3) [6/12/2000 4:02:17 PM]
1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC.
file:///E|/Temp/temp/english/107E/install/install.htm (3 of 3) [6/12/2000 4:02:17 PM]

On-Screen Display

Description of the On-Screen Display The OSD Tree The OSD Controls
Description of the On Screen Display
What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly though an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor.
Basic and simple instruction on the control keys. On the front controls of your monitor, once you press the Use the or the button, the On Screen Display (OSD) Main
Controls window will pop up and you can now start making adjustments to your monitor's various features. keys to make your adjustments within.
file:///E|/Temp/temp/english/107E/osd/osddesc.htm (1 of 4) [6/12/2000 4:02:18 PM]

The OSD Tree

Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments.
file:///E|/Temp/temp/english/107E/osd/osddesc.htm (2 of 4) [6/12/2000 4:02:18 PM]
file:///E|/Temp/temp/english/107E/osd/osddesc.htm (3 of 4) [6/12/2000 4:02:18 PM]
file:///E|/Temp/temp/english/107E/osd/osddesc.htm (4 of 4) [6/12/2000 4:02:18 PM]
Customer Care and Warranty

Microprocessor-based digital control of picture parameters and video modes for complete control of picture settings and modes and instant recall of all settings at the push of a button. This is a very advanced feature that allows the user to switch to any required mode at any instant without having to spend time readjusting the picture. It is currently available in most Philips monitors.

Dot pitch

The shortest distance between two phosphor dots of the same color on the screen. The smaller the dot pitch, the better the resolution of the monitor.
file:///E|/Temp/temp/english/107E/glossary/glossary.htm (4 of 18) [6/12/2000 4:02:20 PM]

Dot rate

Frequency in MHz of the dot clock. It is a measure of the speed with which data is transferred between the video card and subsequent processing circuitry. Also known as video dot rate. RETURN TO TOP OF THE PAGE
E Electromagnetic radiation standards
International standards set to limit electromagnetic emissions from monitors. There are currently two important standards both derived from regulations originally laid down by Swedish authorities. MPR-II The standard originally proposed by the Swedish National Board of Measurement and Testing. It set maximum levels of electromagnetic radiation emitted by monitors, and has now been adopted as a world standard. MPR-II defines maximum permitted electrostatic, magnetic and electric field levels measured at a distance of 50 cm from the center of the monitor (see table). TCO
file:///E|/Temp/temp/english/107E/glossary/glossary.htm (5 of 18) [6/12/2000 4:02:20 PM]
In 1991, the Swedish Tjnstemannens Central Organization (TCO, Swedish confederation of Professional Employees ) set a standard even more severe than MPR-II, especially for alternating electric fields (AEF). The TCO standard is more severe since not only are the permitted field levels reduced compared with MPR-II, but the measuring distance is also reduced (see table). Electromagnetic radiation standards EMI (Electrical Magnetic Interference) The electrical and/or magnetic radiation coming from the working electrical or electronic equipment. EMS (Electrical Magnetic Sustainment) The ability of electrical or electronic equipment to function properly in the environment with electrical and/or magnetic interference. RETURN TO TOP OF THE PAGE

F Flicker

Very rapid variations in picture intensity caused by the finite time required for the electron beam to scan a picture onto the screen. Two kinds of flicker occur: line flicker caused by the electron beam scanning-in each line of the picture; and frame flicker (or field flicker if the picture is interlaced) caused by the frame repetition rate of 50 frames/second. Frame flicker is noticeable with GUI and DTP software (which have a light background), and can be very disturbing, especially for those who work regularly with displays - contributing to eye strain, headaches, visual blurring, stress, etc. The problem can, however, be eliminated by increasing the refresh rate (number of frames/second) of the monitor to a value above around 70 Hz. Sensitivity to flicker appears to diminish with increasing age. RETURN TO TOP OF THE PAGE

H Hertz

The unit of frequency named after the physicist Heinrich Hertz (1857-1894). 1 hertz (Hz) is equal to 1 cycle/second.

Horizontal dot pitch

See Dot pitch.
Horizontal scanning frequency
file:///E|/Temp/temp/english/107E/glossary/glossary.htm (6 of 18) [6/12/2000 4:02:20 PM]
Also called line frequency and expressed in kHz, it is the number of video lines written on the screen every second (from left to right). The higher the horizontal scanning frequency, the better the resolution (i.e., the higher the resolution and/or the higher the refresh rate). RETURN TO TOP OF THE PAGE

I INF File

INF file (Information File) Information (INF) files store information in a specific format. The set-up functions retrieve information from the INF file to use when performing installation operations. Examples of the type of information stored in an INF file include INI and registry changes, file names, and locations of the source files on source media.
Interlaced/non-interlaced
Interlaced. The method of writing a picture on the screen by initially writing all even lines and subsequently writing all odd lines of the picture. Result: The complete picture is composed of two interlaced half pictures (or fields). With interlacing, a vertical (or field) frequency of 50 Hz means a picture (or frame) frequency of 25 Hz. Non-interlaced. The method of writing a picture on the screen by successive video lines of the picture so that a full frame is written onto the screen in one vertical sweep of the beams. With a non-interlaced display, a vertical frequency of 50 Hz means a picture (or frame) frequency of 50 Hz. At any given resolution, non-interlaced modes are preferable to interlaced modes; however, generation of non-interlaced modes is more expensive.

file:///E|/Temp/temp/english/107E/glossary/glossary.htm (12 of 18) [6/12/2000 4:02:20 PM]
The ARAS coating reflects only about 0.5% of the incident light.
AGRAS (Anti-Glare anti-Reflection Anti-Static) coating. A combined anti-reflection, anti-glare, anti-static coating.

Self-test function

A monitor equipped with hardware or software to automatically detect cable connection status.
Deviation of a reproduced picture from its intended shape. The following types of distortion are most common:
file:///E|/Temp/temp/english/107E/glossary/glossary.htm (13 of 18) [6/12/2000 4:02:20 PM]
SOG (Synchronization On Green)
A properly functioning color monitor requires five kinds of signals: horizontal sync pulse, vertical sync pulse, red color signal, green color signal and blue color signal. Signals from a PC are transmitted to a monitor using one of three methods: 1. Separate sync: Horizontal and Vertical sync signals transmitted separately 2. Composite sync: Horizontal and vertical sync pulses mixed into a single signal train. 3. SOG: Horizontal and vertical sync pulses mixed, then combined with the green color signal. RETURN TO TOP OF THE PAGE

Tilt function

file:///E|/Temp/temp/english/107E/glossary/glossary.htm (14 of 18) [6/12/2000 4:02:20 PM]

See rotation function.

Trapezoid distortion
See Geometrical distortion.

TTL signal

A TTL (Transistor-transistor-logic) signal is a digital signal level for controlling the screen colors. With TTL driving, the red, green and blue signals can only be switched on or off or provided with an intensity signal. A TTL-driven monitor can thus display a maximum of 64 colors. Video standards such as MDA, CGA and EGA are based on TTL level. RETURN TO TOP OF THE PAGE
U USB or Universal Serial Bus
A smart plug for PC peripherals. USB automatically determines resources (like driver software and bus bandwidth) required by peripherals. USB makes necessary resources available without user intervention. q USB eliminates "case angst" -- the fear of removing the computer case to install add-on peripherals. And USB also eliminates adjustment of complicated IRQ settings when installing new peripherals.
USB does away with "port gridlock." Without USB, PCs are normally limited to one printer, two Com port devices (usually a mouse and modem), one Enhanced Parallel Port add-on (scanner or video camera, for example) and a joystick. More and more peripherals for multimedia computers arrive on the market every day. With USB, up to 127 devices can run simultaneously on a computer. USB permits "hot plug-in." There's no need to shut down, plug in, reboot and run set-up to install peripherals. And no need to go through the reverse process to unplug a device.

In short, USB transforms today's "Plug-and-Pray" into true Plug-and-Play! Hub A Universal Serial Bus device that provides additional connections to the Universal Serial Bus. Hubs are a key element in the plug-and-play architecture of USB. The Figure shows a typical hub. Hubs serve to simplify USB connectivity from the user's perspective and provide robustness at low cost and complexity. Hubs are wiring concentrators and enable the multiple attachment characteristics of USB. Attachment points are referred to as ports. Each hub converts a single attachment point into multiple attachment points. The architecture supports concatenation of multiple hubs. The upstream port of a hub connects the hub towards the host. Each of the other downstream ports of a hub allows connection to another hub or function. Hubs can detect, attach and detach at each downstream port and enable the distribution of power to downstream devices. Each downstream port can be individually enabled and configured at either full or low speed. The hub isolates low speed ports from full speed
file:///E|/Temp/temp/english/107E/glossary/glossary.htm (15 of 18) [6/12/2000 4:02:20 PM]
signaling. A hub consists of two portions: the Hub Controller and Hub Repeater. The repeater is a protocol-controlled switch between the upstream port and downstream ports. It also has hardware support for reset and suspend/resume signaling. The controller provides the interface registers to allow communication to/from the host. Hub specific status and control commands permit the host to configure a hub and to monitor and control its ports. Device A logical or physical entity that performs a function. The actual entity described depends on the context of the reference. At the lowest level, device may refer to a single hardware component, as in a memory device. At a higher level, it may refer to a collection of hardware components that perform a particular function, such as a Universal Serial Bus interface device. At an even higher level, device may refer to the function performed by an entity attached to the Universal Serial Bus; for example, a data/FAX modem device. Devices may be physical, electrical, addressable, and logical.
Downstream The direction of data flow from the host or away from the host. A downstream port is the port on a hub electrically farthest from the host that generates downstream data traffic from the hub. Downstream ports receive upstream data traffic. Upstream The direction of data flow towards the host. An upstream port is the port on a device electrically closest to the host that generates upstream data traffic from the hub. Upstream ports receive downstream data traffic.
UPS (Universal Power Supply)
The monitor with UPS feature can work in different countries with various mains voltage. RETURN TO TOP OF THE PAGE
file:///E|/Temp/temp/english/107E/glossary/glossary.htm (16 of 18) [6/12/2000 4:02:20 PM]

Congratulations! You have just purchased a TCO '92 / '99 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
Why do we have environmentally labeled computers?
In many countries, environmental labeling has become an established method for encouraging the adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy.
What does labeling involve?
file:///E|/Temp/temp/english/107E/safety/regs/regulat.htm (1 of 11) [6/12/2000 4:02:37 PM]
This product meets the requirements for the TCO'99 scheme which provides for international and environmental labeling of personal computers. The labeling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and magnetic fields, energy consumption and electrical and fire safety. The environmental demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. Labeled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, physical and visual ergonomics and good usability. Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-Stockholm, Sweden Fax: +07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labeled products may also be obtained via the Internet, using the address: http://www.tco-info.com/

Environmental Requirements Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in fetus development may occur. The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available.
file:///E|/Temp/temp/english/107E/safety/regs/regulat.htm (2 of 11) [6/12/2000 4:02:37 PM]
Cadmium** Cadmium is present in rechargeable batteries and in the color-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries, the color-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury** Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labeled unit. CFCs (freons) The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on earth of ultraviolet light with increased risks e.g. skin cancer (malignant melanoma) as a consequence. Lead** Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. The relevant TCO'99 requirement permits the inclusion of lead since no replacement has yet been developed. * Bio-accumulative is defined as substances which accumulate within living organisms. ** Lead, Cadmium and Mercury are heavy metals which are bio-accumulative.

file:///E|/Temp/temp/english/107E/safety/regs/regulat.htm (6 of 11) [6/12/2000 4:02:37 PM]
Polish Center for Testing and Certification Notice
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251.

North Europe Information

file:///E|/Temp/temp/english/107E/safety/regs/regulat.htm (7 of 11) [6/12/2000 4:02:37 PM]
Placering/Ventilation VARNING: FRSKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG R LTTKOMLIGA, NR DU STLLER DIN UTRUSTNING PPLATS.
Placering/Ventilation ADVARSEL: SRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGNGELIGE.
Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETT VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon ADVARSEL: NR DETTE UTSTYRET PLASSERES, M DU PASSE P AT KONTAKTENE FOR STMTILFRSEL ER LETTE N.
BCIQ Notice (Taiwan Only)
file:///E|/Temp/temp/english/107E/safety/regs/regulat.htm (8 of 11) [6/12/2000 4:02:37 PM]
Ergonomie Hinweis (nur Deutschland)
Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung ber den Schutz vor Schden durch Rntgenstrahlen" festgelegten Vorschriften. Auf der Rckwand des Gertes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme hinweist, da die Vorschriften ber die Bauart von Strstrahlern nach Anlage III 5 Abs. 4 der Rntgenverordnung erfllt sind. Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, da 1. Reparaturen nur durch Fachpersonal durchgefhrt werden.

2. nur original-Ersatzteile verwendet werden. 3. bei Ersatz der Bildrhre nur eine bauartgleiche eingebaut wird.
Aus ergonomischen Grnden wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem Untergrund zu verwenden (schlechte Lesbarkeit und erhhte Augenbelastung bei zu geringem Zeichenkontrast wren die Folge). Der arbeitsplatzbezogene Schalldruckpegel nach DIN betrgt 70dB (A) oder weniger. ACHTUNG: BEIM AUFSTELLEN DIESES GERTES DARAUF ACHTEN, DA NETZSTECKER UND NETZKABELANSCHLU LEICHT ZUGNGLICH SIND.

End-of-Life Disposal

Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.
Information for UK only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type
file:///E|/Temp/temp/english/107E/safety/regs/regulat.htm (9 of 11) [6/12/2000 4:02:37 PM]
of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A. Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere.
How to connect a plug The wires in the mains lead are coloured in accordance with the following code: BLUE - "NEUTRAL" ("N") BROWN - "LIVE" ("L") GREEN & YELLOW - "EARTH" ("E") 1. The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter "E" or by the Earth symbol or coloured GREEN or GREEN AND YELLOW. 2. The BLUE wire must be connected to the terminal which is marked with the letter "N" or coloured BLACK. 3. The BROWN wire must be connected to the terminal which marked with the letter "L" or coloured RED. Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of
file:///E|/Temp/temp/english/107E/safety/regs/regulat.htm (10 of 11) [6/12/2000 4:02:37 PM]
the lead - not simply over the three wires.
file:///E|/Temp/temp/english/107E/safety/regs/regulat.htm (11 of 11) [6/12/2000 4:02:37 PM]
Other Related Information
Safety Precautions and Maintenance Troubleshooting Regulatory Information Information for Users in the U. S. Information for Users Outside the U.S

button to highlight ADJUST SIDE ANGLES. button. The SIDE ANGLES window appears. TRAPEZOID should be highlighted.
6) To adjust the trapezoid, press the
button. button to highlight PARALLELOGRAM or press the
7) When the trapezoid is adjusted, press the button to return to the ADJUST SHAPE window.
file:///E|/Temp/temp/english/107E/osd/osd_cont.htm (14 of 25) [6/12/2000 4:03:03 PM]
8) To adjust the parallelogram, press the
button. button to return to the ADJUST SHAPE window.
9) When the parallelogram is adjusted, press the BACK TO MAIN WINDOWS will be highlighted. 10) Press the

button until ROTATE

IMAGE is highlighted. After returning to MAIN CONTROLS.to continue to ROTATE IMAGE, start with step 5 under ROTATE IMAGE and follow the directions.
.to exit completely, press the button twice.to adjust only the PARALLELOGRAM, follow steps 1 - 4 above, then press the button, and follow steps 7 - 9.
ROTATE IMAGE (Not available in all models)
ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of the five preset options. These two options are PINCUSHION and BALANCED pincushion. Note: use this feature only when the picture is not square. 1) Press the 2) Press the button on the monitor. The MAIN CONTROLS window appears. button until ADJUST SHAPE is highlighted.
file:///E|/Temp/temp/english/107E/osd/osd_cont.htm (15 of 25) [6/12/2000 4:03:03 PM]
3) Press the highlighted. 4) Press the
arrow until ROTATE IMAGE is highlighted.

5) Press the

button. The ROTATE IMAGE window appears. ROTATE should be highlighted.
file:///E|/Temp/temp/english/107E/osd/osd_cont.htm (16 of 25) [6/12/2000 4:03:03 PM]
6) To adjust the rotation, press the
button. button to return to the ADJUST SHAPE window. BACK TO
7) When the rotation is adjusted, press the MAIN CONTROLS should be highlighted. 8) Press the
button to return to MAIN CONTROLS. After returning to MAIN CONTROLS.
. to continue to ADJUST COLOR, press the
button until ADJUST COLOR is
highlighted. Next, start with step 3 under ADJUST COLOR and follow the directions.to exit completely, press the button twice.

All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site within 48 hours of your call being received. An extended warranty called Philips F1rst Choice Premium is available in addition to your Philips F1rst Choice warranty. For more details contact your Philips dealer. Before contacting Philips, please prepare the following details so we can solve your problem quickly. q Philips type number
Philips serial number Purchase date (copy of purchase may be required) PC environment Processor: r 286/386/486/Pentium Pro/Internal memory r Operating system (Windows, DOS, OS/2, MAC) r Fax/Modem/Internet program? Other cards installed
Having the following information available will also help speed up the process:
Your proof of purchase indicating: date of purchase, dealer name, model and product serial number. The full address to which the swap model should be delivered.

Just a phone call away

Philips customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers. Click here to access the F1rst Choice Contact Information. Or you can reach us via: Website: http://www.philips.com
file:///E|/Temp/temp/english/warranty/war_1st.htm [6/12/2000 4:03:11 PM]

International Guarantee

Your International Guarantee
Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer. The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer's name and model and production number of the product. The Philips guarantee may not apply if:

file:///E|/Temp/temp/english/warranty/war_usa.htm (1 of 3) [6/12/2000 4:03:11 PM]
Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
Where CAN I GET MORE INFORMATION? For more information, contact the Philips Customer Care Center by calling (877) 835-1838 (U.S.A. customers only) or (903) 242-4804. Before Requesting Service. Please check your owner's manual before requesting service. Adjustments of the controls discussed there may save you a service call.
TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS. Contact the Philips Customer Care Center phone number listed below for product assistance and procedures for servicing: Philips Customer Care Center (877) 835-1838 or (903) 242-4804 (In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.)
TO GET WARRANTY SERVICE IN CANADA. Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.)
REMEMBER. Please record the model and serial numbers found on the product below. MODEL # ________________________________________________ SERIAL # ________________________________________________
file:///E|/Temp/temp/english/warranty/war_usa.htm (2 of 3) [6/12/2000 4:03:11 PM]
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. Philips Customer Care Center, P. O. Box 2976, Longview, TX 75601
All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site within 48 hours of your call being received within the first year of purchase. If you have any problems with your monitor within the second or third year of purchase, we will repair it after it has been sent to the service provider at your expense and returned to you within five working days, free of charge. An extended warranty called Philips F1rst Choice Premium is available in addition to your Philips F1rst Choice warranty. For more details contact your Philips dealer. Before contacting Philips, please prepare the following details so we can solve your problem quickly. q Philips type number

doc1

Other Documents You May Need
In addition to this Electronic User's Guide, you may need to refer to the following documentation:
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/ABOUT/ABOUT.HTM (1 of 3)7/15/2004 5:05:46 PM
Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the monitor. This is included with this product.

Notational Descriptions

The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system.
CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and tells you how to avoid the problem. SMART HELP: This icon indicates helpful information when adjusting the On Screen Display of your monitor.
Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/ABOUT/ABOUT.HTM (2 of 3)7/15/2004 5:05:46 PM
2003 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/ABOUT/ABOUT.HTM (3 of 3)7/15/2004 5:05:46 PM

107E Product Information

Product Information
Product Features Technical Specifications Automatic Power Saving Physical Specification Pin Assignment Product Views

Product Features

Model 107E50 107E51 107E56 Regulation TCO'03 MPRII MPRII Color Gray Gray Black
17-inch (16.0" VIS) color monitor with excellent front of screen performance for use with MACs and PCs Autoscan covers horizontal frequencies up to 70 kHz offering a maximum resolution of 1280 x 1024 with flicker free display of 1024 x 768 at up to 88 Hz Flat square High Contrast CRT with high-resolution 0.27 mm dot pitch (0.23 hdp). Large screen display in a small footprint: 17-inch conventional monitor with maximum depth of only 419 mm/16.5" Multimedia Base and USB Hub option sRGB for true on screen color representation. FCC, CE (in selected countries only) and ISO9241, ISO14001 certified

"-" and "+" buttons, are used for adjusting the OSD of your monitor.
LightFrame hotkey. When the button is pressed, the highbrightness function of LightFrame will show up.

Rear View

file:///D|/EDFU/crt_17_5/edoc/ENGLISH/INSTALL_6/INSTALL.HTM (2 of 3)7/15/2004 5:05:48 PM
1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/INSTALL_6/INSTALL.HTM (3 of 3)7/15/2004 5:05:48 PM

On-Screen Display

Description of the On-Screen Display The OSD Tree The OSD Controls
Description of the On Screen Display
What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly through an on-screen instruction window. The user interface provides userfriendliness and ease-of-use when operating the monitor.
Basic and simple instruction on the control keys. On the front controls of your monitor, once you press the various features. Use the button, the On Screen Display (OSD)
Main Controls window will pop up and you can now start making adjustments to your monitor's to make your adjustments within.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/OSDDESC.HTM (1 of 4)7/15/2004 5:05:49 PM

The OSD Tree

Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. Your monitor may not include all the items in the OSD tree shown below.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/OSDDESC.HTM (2 of 4)7/15/2004 5:05:49 PM
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/OSDDESC.HTM (3 of 4)7/15/2004 5:05:49 PM
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/OSDDESC.HTM (4 of 4)7/15/2004 5:05:49 PM
Customer Care and Warranty
Customer Care & Warranty
PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria Belgium Cyprus Denmark France Germany Greece Finland Ireland Italy Luxembourg the Netherlands Norway Portugal Sweden Switzerland Spain United Kingdom EASTERN EUROPE: Czech Republic Hungary Poland Russia Turkey Bulgaria LATIN AMERICA: Antilles Argentina Brazil Chile Colombia Mexico Paraguay Peru Uruguay Venezuela NORTH AMERICA: USA & Canada PACIFIC: Australia New Zealand ASIA: Bangladesh China Hong Kong India Indonesia Japan Korea Malaysia Pakistan Philippines Singapore Taiwan Thailand AFRICA: Morocco South Africa MIDDLE EAST: Dubai Egypt

What are the differences between MPRII, TCO92, TCO95, TCO99 and TCO'03?
In the general hierarchy of standards, TCO'03/TCO99 is the highest level of certification. Next is TCO95, which is "better" than TCO92, which, in turn, is better than MPRII. Below, we compare the standards in each category. -TCO 92 Phase out: June 30, 2000 -TCO 95 Will be end December 31, 2003 Emissions: MPRII: Set low emission rules for visual displays. TCO92: Imposed more stringent standards than MPRII. TCO95: Further toughened TCO92 rules. TCO99: Delineated even more severe standards and test procedures than TCO95. TCO'03: Same as TCO99 standard + Testing uncertainty.
Safety: MPRII: No requirement. TCO92/95/99/03: All set requirements.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/FAQ.HTM (2 of 14)7/15/2004 5:05:51 PM
Energy Saving: MPRII: No requirement. TCO92: Standby mode < 30W, Off mode < 8W TCO95: Standby mode < 30W, Off mode < 8W TCO99: Standby mode < 15W, Off mode < 5W TCO'03:Standby mode < 15W, Off mode < 5W
Visual Ergonomics: MPRII: No requirement. TCO92: No requirement. TCO95: Set ergonomic rules including minimum contrast level, flicker and jitter. TCO99: Tightened TCO95 rules. TCO'03: Tighten TCO99 rule for CRT and new requirement of screen color for TFT LCD Monitors.
Ecology: MPRII: No requirement. TCO92: No requirement. TCO95: Set general ecological standards including recycling preparation, environmental policy and environmental certification. TCO99: Further tightened TCO95 norms. TCO'03:Require the recycling information to users.
10. How do I enable the energy saving function?
Go to 'My Computer' and select 'Control Panel' followed by 'Monitor Control.' Select "All default selection' and choose your Philips monitor model from the default driver list. Plug and Play will automatically enable the EPA tick box for you. In DOS or Windows 3.1, you must first make sure your PC supports power saving.
11. What is refresh rate?

44. The picture appears too dim. How can I correct this? Adjust Brightness and/or Contrast via the monitor 's OSD. Some models have a Video Input Select under Advanced Controls in the monitor 's OSD. Most computers require it to be set at 0.7V. Please review the following for possible solutions: If the OSD menu is also dim, please contact service for repair q Reset the monitor via the OSD menu q Change the color temperature settings to 9300 color coordination via the OSD menu q Set the Contrast to maximum level (100) and Brightness to middle level (50) Video card could be defective (try the monitor with another computer)
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/FAQ.HTM (12 of 14)7/15/2004 5:05:51 PM
45. I have noticed two thin horizontal lines on the screen of my Philips monitor. Is this normal? This phenomenon can occur with Philips 107P, 109P and 201P monitors and is normal. Your monitor is using an Aperture Grille, which consists of fine vertical wires to align the electron beams with the phosphors on the screen. To prevent these vertical wires from vibrating and to keep them properly aligned with the picture tube, two horizontal damper wires are required. These are located on one-third and on twothird from the top of the screen. The result is that you will see two very thin horizontal lines over your screen since the two wires are casting a slight shadow on the screen surface. You will find these wires (line) in any monitor from Philips and other brands using the Aperture Grille technology.
46. How can I increase the color display of my monitor? The amount of video memory your video card holds determines the amount of colors that can be displayed on your computer screen. To get the most out of your video card, you will need to either install the latest drivers onto your computer or upgrade the video cards memory. Please check with your computer or video card manufacturer for further details.
47. Why is there no picture on my monitor?
Check the wall socket for power. Verify that there is power by connecting another product. Ensure the power cable is correctly attached to both the wall socket and the monitor. Check that the power button is switched on. Unplug the monitor for approx. 1 minute and plug it in again. Switch the monitor back on.

48. Why is there no picture on my monitor even though the power LED is yellow/amber or flashing green?
Reboot your computer while holding the Ctrl key on your computer. If you see any picture during the boot procedure, please verify the settings of your video card (for Windows go to Control Panel and select Display). Check that the video cable is not damaged, bent or that any of the pins in the connector are damaged (please be aware that some VGA connectors have one missing pin). If damaged, replace with a new cable. Check that the cable is attached correctly to the computer. Press any key on the keyboard to wake-up the computer from power saving mode.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/FAQ.HTM (13 of 14)7/15/2004 5:05:51 PM
49. Why is there no picture on my monitor even though the power LED is green? Verify the Contrast and Brightness setting of the monitor. First press and hold the 5 (-) button to increase Contrast and then press and hold the 4 (+) button to increase Brightness. These buttons are located on the front of your monitor.
Press both the 5(-) button and the OK button at the same time to switch input A|B. Try and repeat step 48 above.
50. Why does the picture disappear after I press the on/off button quickly? This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds between powering off and on your monitor, your picture will then be restored.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/FAQ.HTM (14 of 14)7/15/2004 5:05:51 PM

Glossary

ABCDEFGHIJKLMNOPQRSTUVWXYZ

A Autoscan

A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus operate with a wide range of video cards. MultiSync, a registered trademark of NEC, provides a similar function. RETURN TO TOP OF THE PAGE

B Balanced pincushion

See Geometric distortion

BNC connection

A special construction of connector used in some monitors with higher horizontal scanning frequency. The BNC connection can provide the optimum shielding and matching characteristic impedance of video signal path to ensure the best video performance.

file:///D|/EDFU/crt_17_5/edoc/ENGLISH/GLOSSARY/GLOSSARY.HTM (9 of 22)7/15/2004 5:05:54 PM

L Linearity

The degree to measure the actual location of a pixel on the screen corresponds with its intended location. ( see figure )

Line frequency

See Horizontal scanning frequency.

Low-emission monitor

A monitor that complies with international standards on radiation. See Electromagnetic radiation standards.
Low-frequency electric and magnetic fields
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/GLOSSARY/GLOSSARY.HTM (10 of 22)7/15/2004 5:05:54 PM
Alternating fields generated by the deflection yoke. These are subject to increasing attention, notably by governing authorities, the trade and the press. Although there is no scientific evidence that monitor emissions are harmful, much effort has gone into reducing emissions on the principle of better safe than sorry. Currently, there are two areas of interest: very-low frequency (VLF) electric and magnetic fields extending from 2 kHz to 400 kHz, and extreme low frequency (ELF) fields extending from 5 Hz to 2 kHz. See also Electromagnetic radiation standards. RETURN TO TOP OF THE PAGE

M Moir effect

A fringe pattern arising from the interference between two superimposed line patterns. In a monitor it comes from the interference between the shadow mask pattern and the video information (video moir), and between the shadow mask pattern and the horizontal line pattern (scan moir). It shows itself as wavy patterns on the screen and becomes more noticeable as monitor resolution increases. Since the video signal varies continuously, little can be done about video moir. Scan moir depends on the horizontal scanning frequency and can be alleviated by appropriate choice of frequency. Autoscan (MultiSync) monitors, which operate over a range of scanning frequencies, may sometimes exhibit moir in certain video modes.
See Electromagnetic radiation standards.

MultiSync monitor

See Autoscan monitor. RETURN TO TOP OF THE PAGE
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/GLOSSARY/GLOSSARY.HTM (11 of 22)7/15/2004 5:05:54 PM
Non-interlaced See Interlaced/non-interlaced. RETURN TO TOP OF THE PAGE
O OSD (On Screen Display)
The feature that allows an end user to adjust screen performance and parameters of monitors directly through an on-screen instruction window. See CustoMax in CrystalClear section.

Overscan

The practice in which areas without useful video information are scanned outside the visible screen area in order to make maximum use of the screen for display of active video information. This practice is occasionally necessary because some video cards generate a video pattern that is smaller than the visible screen area, resulting in an image that is smaller (and less legible) than it needs to be. RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_17_5/edoc/ENGLISH/GLOSSARY/GLOSSARY.HTM (17 of 22)7/15/2004 5:05:54 PM

Tilt function

See rotation function.

Trapezoid distortion

See Geometrical distortion.

TTL signal

A TTL (Transistor-transistor-logic) signal is a digital signal level for controlling the screen colors. With TTL driving, the red, green and blue signals can only be switched on or off or provided with an intensity signal. A TTL-driven monitor can thus display a maximum of 64 colors. Video standards such as MDA, CGA and EGA are based on TTL level. RETURN TO TOP OF THE PAGE
U USB or Universal Serial Bus
A smart plug for PC peripherals. USB automatically determines resources (like driver software and bus bandwidth) required by peripherals. USB makes necessary resources available without user intervention.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/GLOSSARY/GLOSSARY.HTM (18 of 22)7/15/2004 5:05:54 PM
USB eliminates "case angst" -- the fear of removing the computer case to install add-on peripherals. And USB also eliminates adjustment of complicated IRQ settings when installing new peripherals. USB does away with "port gridlock." Without USB, PCs are normally limited to one printer, two Com port devices (usually a mouse and modem), one Enhanced Parallel Port add-on (scanner or video camera, for example) and a joystick. More and more peripherals for multimedia computers arrive on the market every day. With USB, up to 127 devices can run simultaneously on a computer. USB permits "hot plug-in." There's no need to shut down, plug in, reboot and run set-up to install peripherals. And no need to go through the reverse process to unplug a device.
In short, USB transforms today's "Plug-and-Pray" into true Plug-and-Play! Hub A Universal Serial Bus device that provides additional connections to the Universal Serial Bus. Hubs are a key element in the plug-and-play architecture of USB. The Figure shows a typical hub. Hubs serve to simplify USB connectivity from the user's perspective and provide robustness at low cost and complexity. Hubs are wiring concentrators and enable the multiple attachment characteristics of USB. Attachment points are referred to as ports. Each hub converts a single attachment point into multiple attachment points. The architecture supports concatenation of multiple hubs. The upstream port of a hub connects the hub towards the host. Each of the other downstream ports of a hub allows connection to another hub or function. Hubs can detect, attach and detach at each downstream port and enable the distribution of power to downstream devices. Each downstream port can be individually enabled and configured at either full or low speed. The hub isolates low speed ports from full speed signaling. A hub consists of two portions: the Hub Controller and Hub Repeater. The repeater is a protocolcontrolled switch between the upstream port and downstream ports. It also has hardware support for reset and suspend/resume signaling. The controller provides the interface registers to allow communication to/from the host. Hub specific status and control commands permit the host to configure a hub and to monitor and control its ports. Device A logical or physical entity that performs a function. The actual entity described depends on the context of the reference. At the lowest level, device may refer to a single hardware component, as in a memory device. At a higher level, it may refer to a collection of hardware components that perform a particular function, such as a Universal Serial Bus interface device. At an even higher level, device may refer to the function performed by an entity attached to the Universal Serial Bus;

file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/regs/regulat.htm (2 of 17)7/15/2004 5:30:02 PM
Environmental Requirements Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in fetus development may occur. The relevant TCO' 99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. Cadmium** Cadmium is present in rechargeable batteries and in the color-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO' 99 requirement states that batteries, the color-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury** Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in high doses. The relevant TCO' 99 requirement states that batteries may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labeled unit. CFCs (freons) The relevant TCO' 99 requirement states that neither CFCs nor HCFCs may be used during the
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/regs/regulat.htm (3 of 17)7/15/2004 5:30:02 PM

The product also comply with the following standards - ISO9241-3, ISO9241-7, ISO9241-8 (Ergonomic requirement for Visual Display) - ISO13406-2 (Ergonomic requirement for Flat panels) - GS EK1-2000 (GS specification) - prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display) - MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields) - TCO95, TCO99, TCO'03 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and Emission, TCO: Swedish Confederation of Professional Employees) for TCO versions
Energy Star Declaration PHILIPS 107E5*
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/regs/regulat.htm (7 of 17)7/15/2004 5:30:02 PM
This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS to fulfill the requirements in the NUTEK specification 803299/94. Time settings are adjusted from the system unit by software. NUTEK Normal operation Power Saving Alternative2 One Step VESA State ON OFF LED Indicator Green Flashing Green Power Consumption Typical 64W < 1W
As an ENERGY STAR Partner, PHILIPS has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
We recommend you switch off the monitor when it is not in use for quite a long time.
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Toutes modifications n'ayant pas reu l'approbation des services comptents en matire de conformit est susceptible d'interdire l'utilisateur l'usage du prsent quipement. N'utiliser que des cbles RF arms pour les connections avec des ordinateurs ou priphriques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.
EN 55022 Compliance (Czech Republic Only)

VCCI Notice (Japan Only)

This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for Information technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/regs/regulat.htm (10 of 17)7/15/2004 5:30:02 PM

Class B ITE

MIC Notice (South Korea Only) Class B Device
Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/regs/regulat.htm (11 of 17)7/15/2004 5:30:02 PM
Polish Center for Testing and Certification Notice
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/regs/regulat.htm (12 of 17)7/15/2004 5:30:02 PM
North Europe Information (Nordic Countries) Placering/Ventilation VARNING: FRSKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG R LTTKOMLIGA, NR DU STLLER DIN UTRUSTNING PPLATS.
Placering/Ventilation ADVARSEL: SRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGNGELIGE.
Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETT VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon ADVARSEL: NR DETTE UTSTYRET PLASSERES, M DU PASSE P AT KONTAKTENE FOR STMTILFRSEL ER LETTE N.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107E/SAFETY/regs/regulat.htm (13 of 17)7/15/2004 5:30:02 PM
BSMI Notice (Taiwan Only)
Ergonomie Hinweis (nur Deutschland)
Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung ber den Schutz vor Schden durch Rntgenstrahlen" festgelegten Vorschriften. Auf der Rckwand des Gertes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme hinweist, da die Vorschriften ber die Bauart von Strstrahlern nach Anlage III 5 Abs. 4 der Rntgenverordnung erfllt sind. Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, da

EXTRA CONTROLS is a set of three features, including DEGAUSS. Degaussing removes electromagnetic build up that may distort the color on your screen. 1) Press the button on the monitor. The MAIN CONTROLS window appears.
button until EXTRA CONTROLS is highlighted.
button. The EXTRA CONTROLS window appears. MOIRE will be highlighted.
button to highlight DEGAUSS.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (20 of 24)7/15/2004 5:30:30 PM
5) To degauss your screen, press the
button. Your screen will be degaussed, then the MAIN
CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted.
ADJUST MOIRE (Not available in all models)
EXTRA CONTROLS is a set of three features, including ADJUST MOIRE. Moire is a fringe pattern arising from the interference between two superimposed line patterns. To adjust your moire, follow the steps below. Note: Use only if necessary. By activating ADJUST MOIRE, sharpness can be affected. 1) Press the button on the monitor. The MAIN CONTROLS window appears.

2) Press

file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (21 of 24)7/15/2004 5:30:30 PM
button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be
button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted,
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (22 of 24)7/15/2004 5:30:30 PM
5) To adjust the horizontal moire, press the
6) When the horizontal moire is adjusted, press VERTICAL.

button to highlight

7) To adjust the vertical moire, press

to confirm. Then press

button to adjust.
8) When the vertical moire is adjusted, press the

button to return to

the EXTRA CONTROLS window. BACK TO MAIN CONTROLS will be highlighted.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (23 of 24)7/15/2004 5:30:30 PM

CLOSE MAIN CONTROLS

file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_2/osd_cont.htm (24 of 24)7/15/2004 5:30:30 PM

International Guarantee

Your International Guarantee
Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer. The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer's name and model and production number of the product. The Philips guarantee may not apply if:

WHAT IS COVERED? Warranty coverage begins the day you buy your product. For three years thereafter, all parts will be repaired or replaced, and labor is free. After three years from the day of purchase, you pay for the replacement or repair of all parts, and for all labor charges. All parts, including repaired and replaced parts, are covered only for the original warranty period.
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/WARRANTY/WAR_USA.HTM (1 of 4)7/15/2004 5:30:35 PM
When the warranty on the original product expires, the warranty on all replaced and repaired products and parts also expires.
WHAT IS EXCLUDED? Your warranty does not cover:
labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics. reception problems caused by signal conditions or cable or antenna systems outside the unit. a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.) a product used for commercial or institutional purposes.
Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
Where CAN I GET MORE INFORMATION? For more information, contact the Philips Customer Care Center by calling (877) 835-1838 (U.S.A. customers only) or (919) 573-7855. Before Requesting Service. Please check your owner's manual before requesting service. Adjustments of the controls discussed there may save you a service call.

file:///D|/EDFU/crt_17_5/edoc/ENGLISH/WARRANTY/warcic.htm (11 of 12)7/15/2004 5:30:50 PM
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/WARRANTY/warcic.htm (12 of 12)7/15/2004 5:30:50 PM

PHILIPS Warranty Card

8/16/02

12:38 PM

Page 1
It Takes Only A Moment To

PROTECT YOUR INVESTMENT.

Congratulations on investing in a Philips product. Its an important and intelligent decision thats sure to reward you for many years to come. To ensure youll get all of the privileges and protection that come with your purchase, please complete your Warranty Registration Card within the next ten days.
SIMPLY MAIL THE CARD BELOW TO RECEIVE ALL OF THESE BENEFITS TO WHICH YOURE ENTITLED.

WARRANTY VERIFICATION

Your prompt registration verifies your right to protection under the terms and conditions of your warranty.

OWNER CONFIRMATION

Your completed Warranty Registration Card serves as confirmation of ownership in the event of product loss or theft.

MODEL REGISTRATION

Returning the attached card right away guarantees youll receive all information and special offers for which your purchase makes you eligible. So please act today!
www.philipsusa.com DETACH AND MAIL PORTION BELOW.
WARRANTY REGISTRATION CARD
Registering your product is an essential step to ensure that you receive all of the benefits you are entitled to as a Philips customer. So complete the information below in ink, and drop this card in the nearest mailbox.
IMPORTANT - RETURN WITHIN TEN DAYS
Mail This Card Today To Get The Most From Your Purchase!
No, I do not want to receive personalized offers about Philips products or other information from Philips in the future.

07803 rev. 7/02

Page 2

IMPORTANT

Warranty Registration Card
RETURN THE ATTACHED CARD WITHIN TEN DAYS TO ENSURE YOUR:
Warranty Verification Owner Confirmation Model Registration
See Inside For Valuable Benefits!

Please Open Promptly!

TIME-DATED MATERIAL
PO BOX 1533 DEPOSIT NY 13754-1533

!1375415338!

PLEASE APPLY FIRST CLASS STAMP

 

Tags

YZF-R6-2002 32PW8818 AW3091AA GT-S3600 NAV360 Lrfc25750TT 2292-2293-2294 FC6093 DTH8543 AS140 3 0 MX3WP AVR-1604 TR550 KX-TC170W C4100 Visioneer 4800 GFX-3 PCR-80 Scom4 O DV6710 Hdmi ENP-2224B MH3046SP CU-G95KE YP-S3JAW PC4000 With VCD Stylus T10 NP-Q530-js01 Drannor IC-R2 BAA913HG-EN Celta WD-14482TP VGN-UX180P Orbit MP Classique FP950 K8N-E VT 32 ICF-C160L LE32B650t2wxxc PRO 11 XP2070 Gr-d90 28PW8504-12 Bearpaw-1200CU- Plus Hilti TE15 KX-T7550 CDX-L430X MC-7645B SCH-U620 DP5500 VSX-D912 Crdh145-36 Level MAM 2110 STR-DA3500ES WR250F-2003 TLU-01911B CCD-TR3300E EW962S 5201 PLL MW8998B DMC-LS85 AWF14480W Travelmate C210 LN40C530 OT-320 500 E SS-325X EWS1045 HB851 SGH-A801 CQ-C1400N L1952T-SF Equalizer Travelmate 350 W 1512 Seiko 5J22 KDC-MP628 Program D815epea2 WX-5000MDX GPS 3000 D-EJ021 FP72E DAV-DZ270K PD-F805 Polaroid I835 SDV4235 Review CMK7026RE RP-21FE85G Gigaset S795 HD160HJ-TKY Nokia 5510 SC-880 Excursion-2004 DSC-P72

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101