Rechargeable Cordless Tripleheader Razor

1090X 1060X 1059X 1050X

Register your product and get support at

www.philips.com/norelco

ENGLISH 4

1090X/1060X/1059X/1050X

Congratulations on your purchase and welcome to Philips Norelco! To fully benefit from the support that Philips Norelco offers, register your product at www.philips.com/norelco
Felicitaciones en su compra y recepcin a Philips Norelco! Beneficiar completamente de la ayuda que las ofertas de Philips Norelco, colocan su producto en www.philips.com/norelco

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS precautions should always When using an electric appliance, basic
be followed, including the following: Read all instructions before using this appliance.
DANGER of electric shock: To reduce the risk
1. not reach for a razor or corded charging stand/pod that has Do fallen into water. Unplug immediately. 2. Use razor only in dry condition. Do not use a razor or corded charging stand/pod while bathing or in a shower. 3. Do not submerge razor in water. 4. not place or store a razor or charging stand/pod where it Do can fall or be pulled into a tub or sink. Do not place or drop a razor or charging stand/pod into water or other liquid. 5. Always unplug this charging stand/pod from the electrical outlet immediately after use, except when razor is (re)charging. 6. Unplug and remove power supply cord from charging stand/pod before cleaning.
plugged in. For assistance call 1-800-243-3050. 4. eep the razor, charging stand/pod, cord and charging plug away K from heated surfaces. 5. Never drop or insert any object into any opening. 6. o not charge razor or plug in charging stand/pod outdoors D or operate where aerosol (spray) products are being used or where oxygen is being administered. 7. o not use this razor with a damaged or broken comb, as facial D injury may occur. 8. lways put razor in stand/pod first, attach cord to stand/pod, A then plug into outlet. Be certain plug is inserted firmly into charging stand/pod, up to mark indicated on plug. To disconnect, remove charging plug from outlet. 9. ever put the razor in direct sunlight or store in a pouch or N charging pod at a temperature above 140F. 10.Razor can be rinsed under running tap water. Do not charge or operate razor until fully dried. 11.To prevent possible damage to the cord, do not wrap cord around the razor or charging stand/pod.
WARNINGburns, fire, electric shock, or injury To reduce the risk of
SAVE THESE INSTRUCTIONS a transformer. Do not IMPORTANT: The power plug contains
to persons: 1. lose supervision is necessary when this razor/charging C stand/pod is used by, on, or near children or invalids. 2. Use this razor for its intended household use as described in this manual. Do not use attachments not recommended by Philips Electronics North America Corporation. 3. ever operate this razor/charging stand/pod if it has a damaged N cord or charging plug, if it is not working properly, if it has been dropped or damaged, or dropped into water while
cut off the power plug to replace it with another plug, as this will cause a hazardous condition.

Table of Contents

45 - DAY MONEY-BACK GUARANTEE Features..8-9. Multi-Purpose Display..10-14 Charge Meter.. 14 Before First Use..14-15 Charging..15-18 Recharging.. 18 Quick Charge.. 18 Put It To The Test & Shaving Tips.18-19. How to Shave With Razor...19-20. Trimming...20-21 Travel Lock..21-22. Cleaning..22-26 Replacing Razor Head Assembly...26-27 Maintenance... 27 Storage.. 28. Assistance.. 29 Accessories.. 30 Warranty... 31.
To enjoy the closest and most comfortable shave from your new Philips Norelco Mens Razor, the razor should be used exclusively for 3 weeks. This allows your hair and skin enough time to adapt to the Philips Norelco Shaving System. If, after that period of time, you are not fully satisfied with your Philips Norelco Mens Razor, send the product back along with dated sales receipt and well refund you the full purchase price. The razor must be shipped prepaid by insured mail, insurance prepaid, and have the original sales receipt, indicating purchase price and the date of purchase, enclosed. We cannot be responsible for lost mail. The razor must be postmarked no later than 45 days from the date of purchase. Philips Norelco reserves the right to verify the purchase price of the razor and limit refunds not to exceed suggested retail price. To obtain money-back guarantee return authorization form, call 1-800-243-3050 for assistance. Please allow 4-6 weeks for delivery of check.

Features

Flex & Pivot Action Razor Head Assembly Hair Chamber captures shaven hair Quick Clean System Protective Razor Head Cap Electronic On/Off Button Multi-Purpose Display Shows remaining power level in batteries (1059/1060X) or actual remaining shaving minutes (1090X) Battery Charge, Full & Low Indicators Travel Lock Model 1050X Replacement Razor Head Assembly Indicator Automatic Cleaning Indicator Indicates razor heads should be cleaned

Groove channels beard closer to cutting system Lifter raises hair Slots to cut long hairs
Precision Tube Trimmer Automatic Worldwide Voltage 100V to 240V AC Cleaning Brush Power Pod Charging Stand Rechargeable 1-hour Full Charge for up to 21 days of cordless shaving time Quick Charge Cordless - To shave without a cord Full 2-Year Warranty 45-Day Money-Back Guarantee
How the Unique Philips Norelco Lift and Cut Shaving System Makes Close Comfortable:

Model 1090X

Model 1060X Model 1059X
Holes to cut short hairs even closer

Multi-Purpose Display

Remove any sticker or protective foil from the display before using razor. Depending on the razor model, there are 3 different types of displays:
symbol. Both the minutes indication and plug symbol will start blinking. The display shows an increase in shaving minutes from 0 to 65. 1060X and 1059X C -Models as you connect the power cord As soon
C Display for Model 1090X C Display for Models 1060X and 1059X C Display for Model 1050X
The display provides the following information:
When you turn the razor ON or OFF the display will come on for approximately 10 seconds. Charging Indicator -Model 1090X As soon as you connect the power cord to an electrical outlet, the display goes on. The minutes indication appears as well as the plug
to an electrical outlet, the display goes on. The plug symbol and bottom arrowheads on the display will blink. As charging continues, more and more arrowheads will blink to indicate what level the batteries have been charged.
C -Model 1050X connect the power cord to As soon as you
an electrical outlet, the display goes on. The battery symbol will blink during charging. Full Charge Indicator 1090X C -Modelbatteries have been fully charged, the When
minutes indication appears on the display and the plug symbol goes off.
and C -Models 1060X have1059Xfully charged, all When batteries been arrowheads and charge level lights light up continuously and the plug symbol goes off.
you turn ON, C When top of thethe razorlight upthe arrowheads at the display to indicate the razor is fully charged.
1050X C -Modelthe batteries have been fully charged, When the battery symbol lights up continuously. Remaining Battery Capacity shaving time in minutes.
level blink. When you turn the razor OFF the battery symbol and the arrowheads of the bottom charge level continue to blink for a few seconds.
C -Model 1090X the display shows remaining The number on
and 1059X C -Models 1060Xcharge level arrowheads indicates The amount of
1050X C -Modelthe battery is almost empty (5 or less When
shaving minutes left), the battery symbol lights up red. When you turn the razor OFF the battery symbol blinks for a few seconds.

C Cleaning Indicator For optimal shaving performance, we
the amount of charge remaining in batteries. - When the top arrowheads on the display are lit, the battery is 100% charged. - When only the bottom arrowheads on the display are lit, 20% of the battery capacity is left.
recommend cleaning the razor after EACH use. The blinking faucet symbol will remind you the Razor Head Assembly needs to be cleaned. This happens after each shave.
Head Assembly Indicator C Replacement Razoron your shaving behavior, Every year, depending after turning the razor OFF, the replacement head assembly symbol indicator starts to blink (Model 1090X only, you will also hear a beep). The replacement head symbol will remain visible for the next 7 shaves to remind you that with new shaving heads you will guarantee yourself optimal shaving performance.
Low Battery Indicator -Model 1090X When the battery is almost empty (5 or less shaving minutes left), the minutes indication and plug symbol will blink. When you turn the razor OFF the shaving minutes and plug symbol continue to blink for a few seconds. You will hear a beep when there are no minutes left.
C-Models 1060X and 1059X empty (5 or less When the battery is almost
blinking replacement C If the display shows a faucet symbol with head assembly symbol and exclamation mark, clean the razor thoroughly before continuing to shave (see Cleaning). After cleaning, if the blinking replacement
shaving minutes left), the battery symbol blinks red and the arrowheads of the bottom charge
head assembly symbol and faucet symbol with exclamation mark remain on the display, immediately replace the Razor Head Assembly (see Replacing Razor Head Assembly). Important

Charge Meter

Charge Meter monitors amount of remaining battery power (Models 1060X and 1059X) and actual shaving minutes (Model 1090X) available. Minutes Left or remaining battery capacity is based on the amount of power consumed shaving per minute and is dependent upon your skin and beard type, whether you use pre-shave lotion, and how often the trimmer is used. Initially your razor may need to go through 2 or 3 full charge/recharge cycles before Minutes Left (Model 1090X) or remaining battery capacity indicators (Models 1060X and 1059X) begins to display your accurate shaving minutes left.
Only use the power cord and charging stand or power pod provided to charge the razor. The power plug transforms 100-240V AC to less than 24V DC. Do not attempt to disassemble the Razor Head Assembly to individually clean each cutter and comb. The individual shaving heads are not removable.

Travel Lock

The razor is equipped with a travel lock function. You can use the travel lock function when you are going to store the razor for a longer period or if you are going to take the razor with you when traveling. See Travel Lock section for instructions on how to use this function.

Before First Use

Charging
Charging or recharging at temperatures below 40F or higher than 95F adversely affects lifetime of batteries. Always unplug this charging stand/pod from the electrical outlet immediately after use, except when razor is (re)charging.You can store the razor in the charging stand or power pod. Charging or recharging requires one full hour.
Charge the razor before you start using it (see Charging). Make sure the razor is switched off before you start charging it. Remove any sticker or protective foil from the Display before using razor.
A fully charged razor has a shaving time of up to 65 minutes. You may recharge when the recharge indicators appear on the razor. Do not charge/recharge or use razor until fully dried.
Insert the top of the razor into the power pod (1) and then press the bottom part into the power pod (2). The display on the razor will indicate razor is charging.
Charging in the Power Pod
Connect the small plug of cord to power pod. Connect the power plug into any 100V to 240V AC outlet. Use only the power cord provided.
6 Charging requires one full hour. A fully charged razor has a cordless shaving time of up to 21 days.
Charging in the Charging Stand
1 Connect the small plug of cord to charging stand. Connect the power plug into any 100V to 240V AC outlet. Use only the power cord provided.
An adaptor plug may be necessary for power cord usage in some foreign countries. Use an attachment plug adaptor of the proper configuration for the power outlet. The power cord will automatically convert to work on 100V to 240V AC systems. Lift the top of the power pod lid (1) and remove (2).

C 2 C 3

An adaptor plug may be necessary for power cord usage in some foreign countries. Use an attachment plug adaptor of the proper configuration for the power outlet. The power cord will automatically convert to work on 100V to 240V AC systems. Place razor in stand in an upright position. Press the razor tightly into the holder making sure the charging contacts on each side of the razor fit into the holder. If razor has been placed correctly, you will hear a beep (Model 1090X only).
Remove protective razor head cap from razor. The razor will not fit in the power pod with the protective razor head cap on razor.
The display on the razor will indicate razor is charging. Charging requires one full hour. A fully charged razor has a cordless shaving time of up to 21 days.

Recharging

Recharging requires one full hour. Recharge when the recharge indicators appear on the razor. Always unplug charging stand/pod from the electrical outlet immediately after use, except when razor is (re)charging. 1

skin will need time to adjust. Invest 3 weeks and youll soon experience the full joy of your new razor. tick with it! If you alternate shaving methods S during the adjustment period, it may make it more difficult to adapt to the Philips Norelco shaving system. f you are still not convinced after 21 days, I Philips Norelco will refund you the full purchase price as long as the request is received within 45 days of purchase.

How To Shave With Razor

se this razor for its intended household use U as described in this manual. having with a clean, dry face gives the best S results. Turn razor ON by pressing the on/off button once. Shave against the direction of beard growth using both straight and circular movements. Stretch your skin with your free hand so blades can lift and cut whiskers. Gently press razor to skin so the floating heads can follow the contours of your face. DO NOT press too hard. Too much pressure can pinch the skin into the combs.

Quick Charge

When batteries are totally depleted, recharging the razor for approximately 3 minutes gives enough energy for a 3-minute cordless shave.
Put It To The Test & Shaving Tips
21 Day Trial and Conversion Process. It is a fact that your skin and beard need time to adjust to a new shaving system. se your new razor exclusively for 3 weeks to U fully enjoy the closeness of a Philips Norelco shave. At first you may not get as close a shave as you expect, or your face may even become slightly irritated. This is normal since your beard and
Turn razor OFF by pressing the on/off button once. The display lights up for a few seconds and then shows the remaining battery capacity (Models 1090X, 1060X and 1059X only). Put the Protective Razor Head Cap on the razor to protect razor heads.
Hold trimmer to exact hairline desired. Move trimmer downward with gentle pressure. Trim beard, moustache or sideburns using the trimmer.
C For optimal shaving results, replace Razor Head
Asssembly (model #RQ10) once a year or when the replacement head symbol starts blinking.
5 Turn razor OFF when finished. The display lights up for a few seconds and then shows the remaining battery capacity (Models 1090X, 1060X and 1059X only). 6 Thoroughly clean the trimmer after using (see Cleaning). Put the Protective Razor Head Cap on the razor.
Trimming To Groom Sideburns and Moustache:
1 Turn razor ON. The display lights up for a few seconds. Press the trimmer slide forward to slide out the trimmer.
If you are going to store the razor for a longer time period or if traveling, it is possible to lock the razor. The travel lock prevents the razor from being switched on by accident.

Activating the Travel Lock
Press the on/off button for 3 seconds until the lock symbol appears on the display. For model 1090X only, you will also hear a beep.
2 The travel lock has now been activated.
Deactivating the Travel Lock
Press the ON/OFF button for 3 seconds. The razor turns ON to indicate that the razor has been unlocked. The razor is now ready for use.
o not apply pressure to combs. Do not D touch razor heads with hard objects as this may dent or damage precision-made slotted combs. o not use razor if combs are damaged or D broken. Facial injury may occur. ever dry the shaving unit with a towel or N tissue as this may damage razor heads. O NOT attempt to disassemble the Razor D Head Assembly to individually replace or clean each cutter and comb. The individual shaving heads (cutters and combs) are NOT removable/replaceable. o not use abrasives, scourers or liquids such D as acetone to clean the razor.
B The razor unlocks automatically when you place the razor in the power pod or charging stand while plugged in.
The faucet symbol will start blinking after each shave to remind you that the razor needs to be cleaned.
Razor Head Assembly: After Each Use
It is recommended that you clean the Razor Head Assembly thoroughly after each use to maintain optimal shaving performance. 1 Turn razor OFF. Using your thumb and forefinger, grasp the sides of the shaving head near the center of the assembly and pull each individual shaving head open.

Cleaning

CThe tap symbol on the back of the razor
indicates that the razor can be rinsed under running tap water. lways clean your razor after each use. A egular cleaning guarantees better shaving R results. lways switch razor OFF and remove from A charging stand or power pod before cleaning. ever remove or replace Razor Head N Assembly while motor is on.
Note: Individual shaving heads are not removable from the Razor Head Assembly.
Razor Head Assembly: With A Brush

1 Turn razor OFF. Using your thumb and forefinger pull each individual shaving head open.
Rinse all three shaving heads and three hair chambers under hot tap water by letting the water run in and around all the openings for at least 30 seconds.

C 2 C 3 C 4

BE CAREFUL TO TEST WATER FIRST SO AS NOT TO BURN OR SCALD HANDS.
Note: Individual shaving heads are not removable from the Razor Head Assembly. Brush out hairs from each shaving head and hair chamber with the supplied brush.
You can also immerse the Razor Head Assembly in hot water with some liquid soap or a degreasing liquid (e.g. alcohol) for at least 30 seconds. Make sure the razor is ON to thoroughly remove any residue. Rinse Razor Head Assembly completely under hot tap water before using razor. 5 Carefully shake off excess water and leave the shaving heads open to dry the Razor Head Assembly completely. Press each shaving head back onto the Razor Head Assembly. You will hear a click. Allow Razor Head Assembly to completely air dry before storing.
Press each shaving head back onto the Razor Head Assembly. You will hear a click.

Trimmer: After Each Use

1 Turn razor OFF. Push the trimmer slide switch forward to slide out the trimmer.
Clean the trimmer with the short-bristled side of the brush supplied. Brush up and down along the trimmer teeth. Turn the trimmer ON and OFF. Repeat step 3. Lubricate trimmer teeth twice a year with one drop of mineral oil. Push the trimmer slide switch backward to retract the trimmer.
replace your Razor Head Assembly to obtain optimal shaving results. Assembly C 1Remove the Razor HeadRazor Headfrom the razor by pulling the
Assembly straight up away from the razor.
Razor Head Assembly back on C 2Place newand push down (you will hear a the razor click). The Razor Head Assembly will only fit correctly in one position on razor. Make sure to align the raised notch on the Razor Head Assembly (1) with the slot inside the top of razor (2).
Replacing Razor Head Assembly
Replace the entire Razor Head Assembly once a year for optimal shaving results. Replace damaged or worn Razor Head Assembly with model RQ10 Philips Norelco razor heads only. The individual shaving heads (cutters and combs) are NOT removable/replaceable. Only the one-piece Razor Head Assembly can be replaced.

This razor and charging stand/power pod have no other user-serviceable parts. For assistance call 1-800-243-3050.

Maintenance

Always remove razor from the charging stand/ power pod before cleaning appliance. Unplug the charging stand/power pod after charging/recharging razor. The charging stand/ power pod and razor may be wiped clean using a damp cloth. Water from the tap should be on a warm setting to clean any washable parts. Note: DO NOT place or clean any parts of the charging stand/power pod in a dishwasher.
Replacement Razor Head Assembly Indication
C The replacement head indicator symbol starts blinking (model 1090X only, you will also hear
a beep) to remind you to check if its time to

Storage

The razor can be stored in the power pod supplied. The power pod will provide extra protection during travel. he razor can be placed in the charging T stand/power pod for safe storage. Remove the plug from outlet as soon as the razor is fully charged. f storing razor in power pod, be sure to I remove Protective Razor Head Cap from razor. f appliance will not be used for an extended I period of time, it is recommended that you thoroughly clean and air dry the Razor Head Assembly and trimmer before storing. e sure razor is turned off. Remove cord from B outlet and charging stand/power pod before storing in a safe, dry location where it will not be crushed, banged, or subject to damage. o not wrap cord around razor or charging D stand/power pod when storing. tore cord in a safe location where it will not S be cut or damaged. o not keep charging stand/power pod D permanently plugged into outlet. o not place or store charging stand/power D pod where it can fall or be pulled into a tub or sink, water or other liquid while plugged in. uring storage in the charging stand, always D put the Protective Razor Head Cap on razor to protect heads.

Assistance

or assistance, call toll free: F
1-800-243-3050 or visit our website: www.philips.com/norelco Information is available 24 hours a day, 7 days a week.

Accessories

Replacement Razor Head Assembly Model RQ10 For maximum razor performance, replace your Philips Norelco Razor Head Assembly once a year. Razor Head Assembly contains 3 cutters & 3 combs that are not individually removable or replaceable. Philips Norelco Razor Accessories may be purchased at a store near you or on our website www.philips.com/norelco
FULL TWO YEAR WARRANTY Philips Electronics North America Corporation warrants each new Philips Norelco Product, Models 1090X/1060X/1059X/1050X (except cutters and combs) against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge. IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.* Use of unauthorized replacement parts will void this warranty. PHILIPS ELECTRONICS NORTH AMERICA CORPORATION WILL NOT PAY FOR WARRANTY SERVICE PERFORMED BY A NON-AUTHORIZED REPAIR SERVICE AND WILL NOT REIMBURSE THE CONSUMER FOR DAMAGE RESULTING FROM WARRANTY SERVICE PERFORMED BY A NON-AUTHORIZED REPAIR SERVICE. NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. In order to obtain warranty service, simply go to www.philips.com/norelco or call 1-800-2433050 for assistance. It is suggested that for your protection you return shipments of product by insured mail, insurance prepaid. Damage occurring during shipment is not covered by this warranty. NOTE: No other warranty, written or oral, is authorized by Philips Electronics North America Corporation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion and limitations may not apply to you. * Read enclosed instructions carefully. Manufactured for: Philips Consumer Lifestyle A Division of Philips Electronics North America Corporation 1600 Summer Street 5th Floor, Stamford, CT 06905-5125 LISTED

LISTED

This symbol on the products nameplate means it is TM LISTED listed by Underwriters Laboratories, Inc.
Norelco, Tripleheader, Lift and Cut and TM North America Corporation.
are Registered Trademarks of Philips Electronics
Arcitec is a Trademark of Philips Electronics North America Corporation. is a Trademark of Philips Electronics North America Corporation. PHILIPS is a Registered Trademark of Koninklijke Philips Electronics N.V.
2009 Philips Electronics North America Corporation. All Rights Reserved.

Philips Norelco arcitec Electric razor with Flex & Pivot Action

Our most advanced razor

Perfectly close, even on the neck
For men who only want the very best, arcitec combines Flex & Pivot Action with the Tripletrack shaving heads for a perfectly close shave, even on the neck.
Perfectly close, even on the neck Flex & Pivot Action follows every curve A fast and close shave Triple-Track shaving heads with 50% more shaving surface Shaves even the shortest stubble Precision Cutting System Comfortably close Super Lift & Cut technology Simply rinses clean Washable shaver

1050CC

Electric razor with Flex & Pivot Action

1050X/22

Highlights
Flex & Pivot Action Super Lift & Cut technology

Specifications

Shaving Performance
Shaving System: Triple-Track shaving heads, Precision Cutting System, Super Lift & Cut technology Contour-following: Flex & Pivot Action, Pivoting shaving unit Styling: Skin friendly precision trimmer

Ease of use

Three independently flexing heads in a shaving unit that swivels with a full range of motion. This unique combination ensures optimum skin contact in curved areas to catch even the most problematic neck hair.
The dual blade system lifts hairs to cut comfortably below skin level.
Display: Battery full indicator, Battery low indicator, Charge indicator, Replace shaving heads indicator, Travel lock Charging: Rechargeable, Quick charge, 1 hour, Cordless Cleaning: Automatic Cleaning System, Washable, Cleaning indicator Shaving time: Up to 21 days

Washable shaver

Design
Material: Real carbon fiber side panels
Triple-Track shaving heads

Accessories

Stand: Power Pod, Jet Clean System, Charging stand Maintenance: Cleaning brush, Protection cap

Run time: 60 min

The three shaving tracks of the Triple-Track shaving heads offer 50% more shaving surface than standard, single track rotary shaving heads.
The waterproof shaver can be easily rinsed under the tap.

Precision tube trimmer

Precision Cutting System
Ultra thin heads with slots to shave the long hairs and holes to shave even the shortest stubble.
Patented tube trimmer technology for great precision and maneuverability. Perfect for contouring and trimming moustache and sideburns.
Issue date 2010-11-12 Version: 4.0.1
2010 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com

12 NC: 00000