Philips LCD Monitor Electronic Users Manual
Safety Precautions and Maintenance FAQs Troubleshooting Regulatory Information Other Related Information
Safety and Troubleshooting Information
Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor: Operation: Keep the monitor out of direct sunlight and away from stoves or any other heat source. Remove any object that could fall into ventilation holes or prevent proper cooling of the monitors electronics. Do not block the ventilation holes on the cabinet. When positioning the monitor, make sure the power plug and outlet are easily accessible. If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation. Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center) Do not subject the LCD monitor to severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation. Maintenance: To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel. Unplug the monitor if you are not going to use it for an extensive period of time. Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor. To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment. If your monitor gets wet, wipe it with dry cloth as soon as possible. If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center. Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or
extreme cold. In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges. r Temperature: 5-35C 41-95F r Humidity: 20-80% RH Service: The casing cover should be opened only by qualified service personnel. If there is any need for any document for repair or integration, please contact with your local service center. (please refer to the chapter of "Consumer Information Center") For transportation information, please refer to "Physical Specifications". Do not leave your monitor in a car/trunk under direct sun light.
Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed. RETURN TO TOP OF THE PAGE
Safety and Troubleshooting General FAQs Screen Adjustments Compatibility with Other Peripherals LCD Panel Technology Ergonomics, Ecology and Safety Standards Troubleshooting Regulatory Information Other Related Information
FAQs (Frequently Asked Questions)
General FAQs Q: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? A: Recommended video mode for Philips 19 ": 1280X1024 @60Hz.
Unplug all cables, then connect your PC to the monitor that you used previously. In the Windows Start Menu, select Settings/Control Panel. In the Control Panel Window, select the Display icon. Inside the Display Control Panel, select the 'Settings' tab. Under the setting tab, in box labeled 'desktop area', move the slidebar to 1280X1024 pixels (19"). Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK. Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1280X1024@60Hz (19"). Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. Turn on your monitor and then turn on your PC.

TCO'03 Information

Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.
Some of the features of the TCO'03 Display requirements. Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resoluction, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time-beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields Noise emissions Ecology The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO Restrictions on r chlorinated and brominated flame retardants and polymers r heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world.
For more information, please visit www.tcodevelopment.com RETURN TO TOP OF THE PAGE
Recycling Information for Customers
Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors. There is currently a system of recycling up and running in the European countries, such as The Netherlands, Belgium, Norway, Sweden and Denmark. In U.S.A., Philips Consumer Electronics North America has contributed funds for the Electronic Industries Alliance (EIA) Electronics Recycling Project and state recycling initiatives for end-of-life electronics products from household sources. In addition, the Northeast Recycling Council (NERC) - a multi-state non-profit organization focused on promoting recycling market development - plans to implement a recycling program. In Asia Pacific, Taiwan, the products can be taken back by Environment Protection Administration (EPA) to follow the IT product recycling management process, detail can be found in web site www.epa.gov.tw For help and service, please contact Consumers Information Center or F1rst Choice Contact Information Center in each country or the following team of Environmental specialist can help. Mr. WY Chen- Environment manager Philips Multimedia Flat Display E-mail: w.y.chen@philips.com Tel: +886 (0) 6791 Mr. Maarten ten Houten - Senior Environmental Consultant Philips Consumer Electronics E-mail: marten.ten.houten@philips.com Tel: +31 (0) 33402 Mr. Delmer F. Teglas Philips Consumer Electronics North America E-mail: butch.teglas@philips.com Tel: +521 4322

1. The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter "G" or by the Ground symbol AND YELLOW. or coloured GREEN or GREEN
2. The BLUE wire must be connected to the terminal which is marked with the letter "N" or coloured BLACK. 3. The BROWN wire must be connected to the terminal which marked with the letter "L" or coloured RED. Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the three wires.

China RoHS

The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and LCD monitor which are produced and sold for China market have to meet China RoHS request.
Safety and Troubleshooting FAQs Troubleshooting Regulatory Information Information for Users in the U.S Information for Users Outside the U.S
Other Related Information
Information for Users in the U. S. For units set at 115 V :
Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.

For units set at 230 V:

Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 15-feet long and a tandem blade, grounding type attachment plug rated 15 A, 250 V.
Information for Users outside the U.S. For units set at 230 V:
Use a Cord Set consisting of a minimum 18 AWG cord and grounding type attachment plug rated 15 A, 250 V. The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed and / or be marked HAR.
About This Guide Notational Descriptions

About This Manual

About This Guide
This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD monitor's features, setup, operation and other important information. Its contents are identical to the information in our printed version. It includes the following sections: Safety and Troubleshooting Information provides tips and solutions for common problems as well as other related information you may need. About This Electronic User's Manual gives an overview of information included, along with notation icon descriptions and other documentation for your reference. Product Information gives an overview of the monitor's features as well as the technical specifications for this monitor. Installing Your Monitor describes the initial setup process and gives an overview of how to use the monitor. On-Screen Display provides information on adjusting the settings on your monitor. Customer Care and Warranty contains a list of worldwide Philips Consumer Information Centers along with help desk phone numbers and information on the warranty applicable to your product. Glossary defines technical terms. Download and Print Option transfers this entire manual to your hard drive for easy reference.

Notational Descriptions

The following subsections describe notational conventions used in this document. Notes, Cautions and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system.
CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and tells you how to avoid the problem.
Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority.
2006 Koninklijke Philips Electronics NV All rights reserved. Reproduction, copying, use, modification, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics NV
SmartManage Product Features Lead-free Product Technical Specifications Resolution & Preset Modes Philips Pixel Defect Policy Automatic Power Saving Physical Specification Pin Assignment Product Views Physical Function Best Total Cost of Ownership solution r SmartManage compatibility enables LAN-based asset management r Power consumption below the industry average r TCO'03 guarantees the highest safety and ergonomics standards r Environmentally responsible Energy Star partner Outstanding front of screen performance r SXGA 1280x1024 resolution for sharper display r Fast response time for outstanding display of moving images r sRGB ensures color matching between display and printouts Great Convenience r Dual input accepts both analog VGA and digital DVI signals r Easy to adjust display settings with Philips SmartControl r Embedded power supply eliminates external power adaptors r Auto adjustment for perfect picture display with one touch

Product Information

Product Features 190S7

Lead-free Product

Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health and promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.Philips complies with the European Community stringent RoHS Directive mandating restrictions on hazardous substances in electrical and electronic equipment. With Philips, you can be confident that your display device does not harm the environment.
Technical Specifications*

LCD PANEL

TFT LCD

Screen size Pixel Pitch

19" visual 0.294 x 0.294 mm 1280 x 1024 pixels R.G.B. vertical stripe Anti-glare polarizer, hard coated 376.3 x 301.1 mm 16.2M colors

LCD Panel type

Effective viewing area Display Colors

SCANNING

Vertical refresh rate Horizontal Frequency 56 Hz-76 Hz 30 kHz - 83 kHz
Video dot rate Input impedance - Video

140 MHz

75 ohm

- Sync

2.2K ohm

Input signal levels

0.7 Vpp Separate sync Composite sync Sync on green Positive and negative

Sync input signal

Sync polarities

Optical characteristics

Peak contrast angle

6 o'clock

White Chromaticity
x: 0.283 y: 0.297 (at 9300K) x: 0.313 y: 0.329 (at 6500K)
* This data is subject to change without notice.
Resolution & Preset Modes
A. Maximum Resolution For 190Sx 1024 at 75 Hz (analog input) 1280 x 1024 at 75 Hz (digital input) B. Recommended Resolution For 190Sx 1024 at 60 Hz (digital input) 17 factory preset modes:
H. freq (kHz) 31.469 31.469 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 67.500 60.000 63.981 79.976 35.000
Resolution 720*400 640*480 640*480 640*480 800*600 800*600 800*600 800*600 1024*768 1024*768 1024*768 1152*870 1280*960 1280*1024 1280*1024 640*480
V. freq (Hz) 70.087 59.940 72.809 75.000 56.250 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.000 60.020 75.025 67.000

49.700

832*624

75.000

Automatic Power Saving
If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature:
Power Management Definition VESA Mode

Active Sleep Switch Off

ON OFF OFF

H-sync

Yes No -

V-sync

Power Used
< 34 W (typ.) <1W < 1W

LED color

Green Amber Off
This monitor is ENERGY STAR compliant. As an ENERGY STAR Partner, PHILIPS has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Physical Specifications

Dimension (WxHxD) * Weight Tilt Power supply Power consumption Temperature Relative humidity System MTBF Cabinet color 424 x 418 x 211 mm (incl. Pedestal) 4.6 Kg -5 ~ ~ 240 VAC, 50/60 Hz 34 W* (typ.) 5 C to 40 C (operating) -20 C to 60 C (storage) 20% to 80% 50K hours (CCFL 40K hours) 190S7FG: Light Gray 190S7FB: Black 190S7FS: Silver
* This data is subject to change without notice. * 1280 x 1024, standard size, contrast 50%, brightness max., 6500 K, full white pattern.

Pin Assignment

1. The digital only connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are listed in the following table:

Pin No.

Signal Assignment
T.M.D.S. Data2T.M.D.S. Data2+ T.M.D.S. Data2/4 Shield No connect No connect DDC Clock DDC Data No connect
T.M.D.S. Data1T.M.D.S. Data1+ T.M.D.S. Data1/3 Shield No connect No connect +5V Power Ground (for +5V) Hot Plug Detect
T.M.D.S. Data0T.M.D.S. Data0+ T.M.D.S. Data0/5 Shield No connect No connect T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock-
2. The 15-pin D-sub connector (male) of the signal cable:

Assignment

Red video input Green video input/SOG Blue video input Sense (GND) Cable detect (GND) Red video ground Green video ground Blue video ground
DDC + 5 V Logic ground Ground Serial data line (SDA) H. Sync / H+V. Sync V. Sync Data clock line (SCL)

Product Views

Follow the links to see various views of the monitor and its components.
Front View Product Description
Physical Function 1) Tilt

2) FlexiHolder

Product Information Philips Pixel Defect Policy SmartManage Introduction SmartManage Features and Benefits Philips SmartControl Q&A

SmartManage

Introduction
Philips SmartManage is an advanced solution for users, corporate/institution IT administrator in particular, to manage their Philips monitors as part of the asset management environment. The solution includes three essential components, Philips SmartManage Administrator, and Philips SmarControl and Agent. Philips SmartManage is a solution joint developed by Philips and Altiris Inc.
SmartManage Features and Benefits
The Philips SmartManage is a working console for IT management to gather monitors assets information, run asset report, control assets security, monitor assets security, and issue instant messages to monitor users. Philips SmartManage includes the following major features: Provides an additional security measure that helps corporate users safeguard their investment. Power saving feature that reduces utility costs and manpower required to turn monitors on or off. SmartControl provides an efficient means for adjusting monitor performance and settings. Built-in asset reports reduce audit/maintenance manpower, cycle time and costs.

For more information of Philips SmartManage, please contact with Philips sales representatives in your country.
SmartManage is a software dedicated to business environments. Personal users normally do not need to use SmartManage.

Philips SmartControl

The SmartControl and SmartManage Agent are deployed and installed in computers using Philips monitors. With SmartControl and SmartManage Agent, monitors and PCs can interact with the administrator's inquiries. Because SmartControl operates on individual PC, end users can also use SmartControl to adjust monitor's performance settings. 1. Requirement Graphic cards with nVIDIA (TNT2, GeForce, Quadro, or newer) and ATI (Radeon or newer) graphic chipsets that support the DDC/CI interface Microsoft Windows 2000 and XP operation systems. Philips monitors supporting DDC/CI interface 2. Installation How to download "SmartControl Installation " file: Visit http:// www.philips.com Select "Your Country" Click on "Contact & Support" Enter your model number Enter "Software & Driver" page Select "SmartControl Software", and you can download SmartControl and its driver for installation. Please follow the guidance in the SmartControl installation program. 3. Accessing SmartControl Right click on the desktop of your PC, and select Properties from the shortcut menu pops up. Click on Settings tab, and click on Advanced button. Click Philips SmartControl tab. 4. SmartControl Options Display and Sound By moving the sliding bar toward left or right, users will be able to adjust brightness, contrast, audio volume (if applicable), video noise (not applicable when using DVI-D input), and color temperatures.
Position Users can adjust the horizontal and vertical position of the screen by moving the sliding bar left and right. This function is disabled when using DVI-D (digit) input.
Product Information Click Product Information in the left pane to view the product information stored in the monitor's memory.
General Click on General for general information including driver information, device information, and monitor control.
Within monitor control, users can click on Auto Setup to achieve optimum performance or click on factory reset to reset the parameters of the monitor. Such choices are disabled when using DVI-D (digit) input.

Q&A

Q1. What is the difference between SmartManage, SmartControl?
A. SmartManage is a remote management/control software for IT managers to manage monitors across the network SmartControl is a control panel extension, which helps users to adjust monitor performances and settings by a software interface, instead of the hardware buttons at the front bezel of the monitors. Q2. I change the monitor on a PC to a different one and the SmartControl becomes un-usable, what do I do? A. Restart your PC and see if SmartControl can work. Otherwise, you will need to remove and reinstall SmartControl to ensure proper driver is installed. Q3. The SmartControl functions well at the beginning, but it is not workable, what can I do? A. If the following actions were executed, the monitor driver may need to be re-installed. Change video graphic adapter to another one Update video driver Activities on OS, such as service pack or patch Run Windows Update and updated monitor and/or video driver Windows was booted with the monitor power off or disconnected. To find out, please right click My Computer and click on Properties->Hardware-> Device Manager. If you see "Plug and Play Monitor" shows under Monitor, then you need to re-install. Simply remove SmartControl and re-install it. Q4. After installing SmartControl, when clicking on SmartControl tab, nothing shows up after a while or a failure message shows, what happened? A. It might be your graphic adaptor is not compatible with the SmartControl. If your graphic adaptor is one of the above mentioned brands, try to download the most updated graphic adaptor driver from corresponding companies web site. Install the driver. Remove SmartControl, and re-install it once more. If it is still not working, we are sorry that the graphic adaptor is not supported. Please pay attention to Philips web site for any updated SmartControl driver available. Q5. When I click on Product Information, only partial information is shown, what happened? A. It might be your graphic card adaptor driver is not the most updated version which fully supporting DDC/CI interface. Please try to download the most updated graphic adaptor driver from corresponding companies web site. Install the driver. Remove SmartControl, and re-install it once more. Q6. In a monitor with the Smartlmage feature, the sRGB scheme of color temperature function in SmartControl is not responding, why? A. When Smartlmage is enabled, the sRGB scheme is disabled automatically. To use sRGB, you need to disable Smartlmage with the button at the front bezel of your monitor.

On-Screen Display

Description of the On-Screen Display The OSD Tree
Description of the On Screen Display
What is the On-Screen Display? This is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance of the monitors directly through an on-screen instruction window. The user interface provides userfriendliness and ease-of-use when operating the monitor.
Basic and simple instruction on the control keys. button on the front control of your monitor, the On-Screen Display (OSD) When you press the Main Controls window will pop up and you can then start making adjustments to your monitor's or the keys to make your adjustments. various features. Use the

The OSD Tree

Below is an overall view of the structure of the On-Screen Display. You can use this as a reference
when you want to work your way around the different adjustments later on.
Customer Care & Warranty
PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE: Austria Belgium Denmark France Germany Greece Finland Ireland Italy Luxembourg the Netherlands Norway Portugal Sweden Switzerland Spain United Kingdom EASTERN EUROPE: Czech Republic Hungary Poland Russia Slovakia Slovenia Turkey LATIN AMERICA: Antilles Argentina Brasil Chile Colombia Mexico Paraguay Peru Uruguay Venezuela NORTH AMERICA: Canada USA PACIFIC: Australia New Zealand ASIA: Bangladesh China Hong Kong India Indonesia Japan Korea Malaysia Pakistan Philippines Singapore Taiwan Thailand AFRICA: Morocco South Africa MIDDLE EAST: Dubai Egypt
Your Philips F1rst Choice Warranty
Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact the Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site if your monitor turns out to be faulty or defective. Philips aims at a swap within 48 hours of your call being received.

Your Philips F1rst Choice Warranty(USA)
Thank you for purchasing this Philips monitor.
All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site within 48 hours of your call being received within the first year of purchase. If you have any problems with your monitor within the second or third year of purchase, we will repair it after it has been sent to the service provider at your expense and returned to you within five working days, free of charge.
LIMITED WARRANTY (Computer Monitor)
Click here to access the Warranty Registration Card.
Three Years Free Labor / Three Years Free Service on Parts / One Year Exchange*
*Product will be exchanged with a new or renewed to original specifications unit within two business days for the first year. This product must be shipped in at your expense for service during years two and three.
WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Attach it to this owner's manual and keep both nearby.
WHAT IS COVERED? Warranty coverage begins the day you buy your product. For three years thereafter, all parts will be repaired or replaced, and labor is free. After three years from the day of purchase, you pay for the replacement or repair of all parts, and for all labor charges. All parts, including repaired and replaced parts, are covered only for the original warranty period. When the warranty on the original product expires, the warranty on all replaced and repaired products and parts also expires.

WHAT IS EXCLUDED?

Your warranty does not cover: labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics. reception problems caused by signal conditions or cable or antenna systems outside the unit. a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.) the model or production number on the product has been altered, deleted, removed or made illegible.

Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
Where CAN I GET MORE INFORMATION? For more information, contact the Philips Customer Care Center by calling (877) 835-1838 (U.S.A. customers only) or (919) 573-7855. Before Requesting Service. Please check your owner's manual before requesting service. Adjustments of the controls discussed there may save you a service call.
TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS. Contact the Philips Customer Care Center phone number listed below for product assistance and procedures for servicing: Philips Customer Care Center (877) 835-1838 or (919) 573-7855
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.)
TO GET WARRANTY SERVICE IN CANADA. Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.)
REMEMBER. Please record the model and serial numbers found on the product below. MODEL # ________________________________________________ SERIAL # ________________________________________________
This warranty gives you specific legal rights. You may have other rights which vary from state/ province to state/province. Before contacting Philips, please prepare the following details so we can solve your problem quickly. Philips type number Philips serial number Purchase date (copy of purchase may be required) PC environment Processor:
286/386/486/Pentium Pro/Internal memory Operating system (Windows, DOS, OS/2, Apple Macintosh) Fax/Modem/Internet program?
Other cards installed Having the following information available will also help speed up the process: Your proof of purchase indicating: date of purchase, dealer name, model and product serial number. The full address to which the swap model should be delivered.

Just a phone call away Philips customer help desks are located worldwide. Within the U.S. you can contact Philips customer care Monday-Friday from 8:00 AM-9:00 PM Eastern Time (ET) and on Saturdays from 10:00 AM-5:00 PM ET hrs by using one of the contact phone numbers. For more information on this and more great Philips products visit our website at: Website: http://www.philips.com

Glossary

ABCDEFGHIJKLMNOPQRSTUVWXYZ

A Active matrix

This is a kind of liquid crystal display structure in which switching transistors are attached to each pixel to control the on/off voltage. It produces a brighter and sharper display with a broader viewing angle than a passive matrix display. Also refer to TFT (thin film transistor).

Amorphous silicon (a-Si)

A semiconductor material that is used to make the thin film transistors (TFTs) layer of an active matrix LCD.

Aspect ratio

The width-to-height ratio of the active area of a display. In general, most monitors have an aspect ratio of 4:3. Wide monitors or TVs have an aspect ratio of 16:9 or 16:10.

B Backlight

The light source for a transmissive LCD. There are two techniques used in nowaday LCD designs. Most TFT LCD panels use CCFLs (cold cathode fluorescent light) and a diffuser panel directly behind the liquid crystal layer. New technology using Light Emitting Diodes (LED) are still under development.

Brightness

The dimension of color that is referred to an achromatic scale, ranging from black to white, also called lightness or luminous reflectance. Because of confusion with saturation, the use of this term should be discouraged.
C CCFL(cold cathode fluorescent light)
These are the fluorescent light tubes providing the light for the LCD module. These tubes are generally very thin, approximately 2 mm in diameter.

Chromaticity

That part of color specification, which does not involve illuminance. Chromaticity is two-dimensional and specified by pairs of numbers such as dominant wavelength and purity.
CIE (Commission International de I'Eclairage)
The International Commission on Illumination, the primary international organization concerned with color and color measurement.

Color temperature

A measurement of the color of light radiated by an object while it is being heated. This measurement is express in terms of absolute scale, (degrees Kelvin). Lower Kelvin temperatures such as 2400 K are red; higher temperatures such as 9300 K are blue. Neutral temperature is white, at 6504 K. Philips monitors generally offers 9300 K, 6500 K, and user define.

Contrast

The luminance variation between light and dark areas in an image.

Contrast ratio

The ratio of luminance between the brightest white pattern and the darkest black pattern.

D D-SUB

A VGA Analog input connector. Your monitor comes with a D-Sub cable.
Digital Visual Interface (DVI)
The Digital Visual Interface (DVI) specification provides a high-speed digital connection for visual data types that is display technology independent. The interface is primarily focused at providing a connection between a computer and its display device. The DVI specification meets the needs of all segments of the PC industry (workstation, desktop, laptop, etc.) and will enable these different segments to unite around one monitor interface specification. The DVI interface enables: Reduce signal loss and video noise in signal due to less signal conversion. Independent from display technology, and can be used on LCD, Plasma, LCOS, etc. Plug and play through hot plug detection, EDID and DDC2B. Digital and Analog support in a single connector (DVI-I only).
Energy Star Computers Program An energy conservation program launched by the US Environmental Protection Agency (EPA), promotes the manufacture and marketing of energy-efficient office automation equipment.
Companies joining this program, must be willing to commit themselves to manufacture one or more products capable of going into a low -power state (< 30 W) either after a period of inactivity, or after a predetermined time selected by the user.

G Gamma

Screen luminance as a function of video voltage approximately follows a mathematical power function of the input video signal, the exponent of which is called gamma.

Grayscale

An achromatic scale ranging from black through a series of successively lighter grays to white. Such a series may be made up of steps, which appear to be equally distant from one another. If the Analog/ Digital converter is 8 bit, then the monitor can display at most 28 = 256 levels. For a color monitor, R.G.B. each color hads 256 levels. Thus, total color can display is 256x256x256= 16.7 million.
The main attribute of a color that distinguishes it from other colors. For example, a color may have a green, yellow, or purple hue. Color defined as having hue are know as chromatic colors. White, black, and grays possess no hue.
I IPS (In Plane Switching)
A technique of improving the viewing angle of an LCD where the liquid crystal molecules are switched in the plane of the LCD layer rather than vertical to it.
L LCD (liquid crystal display)
A display composed of liquid crystal suspended between two transparent sheets. The display is composed thousands of pixels which can be turned on or off with electrical stimulation. Thus, colorful images/texts can be generated.

Liquid crystal

The compound found in liquid crystal displays. Liquid crystal reacts predictably when electrically stimulated. This makes it the ideal compound to turn LCD pixels "on" or "off." Liquid crystal is sometimes abbreviated as LC.

Luminance

A measure of the brightness or luminous intensity of light, usually expressed in units of Candelas per square meter (cd/m2) or foot Lamberts. 1 fL=3.426 cd/m2.
A unit of luminance equal to 1 cd/m2 or 0.292 ftL.
PICture Element; the smallest element on a computerized CRT or LCD image, and hence a display.

Polarizer

A light filter which only allows light waves of a certain rotation through. Polarized material with perpendicular filtering is used in LCDs to enclose the liquid crystal. The liquid crystal is then used as the medium which twists the light waves 90 in order to allow the light to pass through or not.

R Refresh rate

The number of times per second the screen is refreshed or redrawn. This number is usually stated in Hz (Hertz) or cycles per second. A rate of 60 Hz is equal to 60 tomes per second.

S sRGB

sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital cameras, monitors, printers, scanners, etc.) Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen. Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting in the monitor's OSD. To do so, open the OSD by pressing the OK button on the front of your monitor. Move the down button to go to Color and press OK again. Use the right button to go to sRGB. Then move the down button and press OK again to exit the OSD. After this, please do not change the brightness or contrast setting of your monitor. If you change either of these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K. Other:

Philips LCD monitor

19"

190S7FS

Big screen performance within your budget
The compact 190S7 pumps up productivity with big screen performance, VGA or DVI signal input option, and great convenience while business-friendly features like SmartManage deliver the best total cost of ownership.
Best total cost of ownership solution Empowered for Windows Vista SmartManage compatibility enables LAN-based asset management Power consumption below the industry average TCO'03 guarantees the highest safety and ergonomic standards Environmentally responsible Energy Star partner Outstanding front of screen performance Fast 8ms On/off response time:Great text & graphics display SXGA 1280 x 1024 resolution for sharper display Dual input accepts both analog VGA and digital DVI signals sRGB ensures color matching between display and printouts Great convenience Easy to adjust display settings with Philips SmartControl Auto adjustment for perfect picture display with one touch

LCD monitor

19" SXGA

190S7FS/00

Highlights
Windows Vista ready Philips Vista-ready monitors are empowered for vibrant, exciting display of this new, visually sophisticated and demanding Windows operating system, designed to enhance your entertainment experience, make you more productive and help you control your computing experience at home and in the office, making viewing, finding and organizing information for work or play quick, efficient and easy. SmartManage enabled SmartManage is a system for monitoring, managing and checking status of display devices as well as delivering remote support to users who experience difficulties - all accomplished over a LAN. Lower power consumption Reduction of the electrical power required to operate a device. TCO '03 compliance A TCO (Swedish Confederation of Professional Employees) standard even more stringent than MPR-II for safety and ergonomics, especially concerning alternating electric fields (AEF). Dual input provides connectors to accommodate input of both analog VGA and digital DVI signals. 8ms response time (On/Off) On-Off response time is the period required for a liquid crystal cell to go from active (black) to inactive (white) and back to active (black) again. It is measured in milliseconds. Faster is better: Lower response time means faster transitions and, therefore, results in fewer visible image artifacts in the display of transition of text and graphics. On-Off response time is a more important measure in the display of business content like documents, graphs and photos. Dual input sRGB ready
sRGB is an industry standard that ensures the best possible match between the colors displayed on your screen and those in your printouts. SmartControl PC software for fine tuning display performance and settings. Philips offers users two choices for display setting adjustment. Either navigate the multilevel On Screen Display menu through buttons on the display itself or use the Philips SmartControl software to easily adjust the various display settings in a familiar way. One-touch auto adjustment The auto adjustment key restores optimal screen position, phase and clock settings with the press of a single button - without navigation through OSD menus and control keys.

Specifications

Picture/Display
LCD panel type: 1280 x 1024 pixels, Anti-glare polarizer, RGB vertical stripe Panel Size: 19"/ 48 cm Effective viewing area: 376.3 x 301.1 mm Pixel pitch: 0.294 x 0.294 mm Brightness: 300 cd/m Contrast ratio (typical): 700:1 Display colors: 16.2 M Viewing angle: 176 (H) / 170 (V), @ C/R > 5 Response time (typical): 8 ms White Chromaticity, 6500K: x = 0.313 / y = 0.329 White Chromaticity, 9300K: x = 0.283 / y = 0.297 Maximum Resolution: 1280 x 1024 @ 75 Hz (digital input) Optimum Resolution: 1280 x 1024 @ 60 Hz (digital input) Video Dot Rate: 140 MHz Horizontal Scanning Frequency: 30 - 83 kHz Vertical Scanning Frequency: 56 - 76 Hz sRGB Regulatory Approvals: CE Mark, EMC, FCC-B, UL, CSA, Energy Star, SEMKO, TV/GS, TV Ergo, TCO '03 Tilt: -5 to 20 VESA Mount: 100 x 100 mm

Accessories

Included Accessories: AC Power Cord, VGA cable Optional accessories: Super Ergo Base User Manual Box dimensions (W x H x D): 490 x 451 x 159 mm Box dimensions in inch (W x H x D): 19.3 x 17.8 x 6.3 inch Set dimensions (W x H x D): 424 x 361 x 65.1 mm Set dimensions in inch (W x H x D): 16.7 x 14.2 x 2.6 inch Set dimensions with stand (W x H x D): 424 x 418 x 211 mm Set dimensions with stand in inch (W x H x D): 16.7 x 16.5 x 8.3 inch MTBF: 50,000 hrs Relative humidity: 20% - 80% Temperature range (operation): 5C to 40C Temperature range (storage): -20C to 60C Product weight (+stand): 4.3 kg Product weight (+stand) (lb): 9.5 lb Weight incl. Packaging: 6.1 kg Weight incl. Packaging (lb): 13.4

Dimensions

Connectivity
Signal Input: VGA (Analog ), DVI-D Sync Input: Composite Sync, Separate Sync, Sync on Green Video input impedance: 75 ohm Sync input impedance: 2.2k ohm Video input signal levels: 0.7 Vpp

Convenience

User convenience: On-screen Display, SmartManage enabled Monitor Controls: Auto, Brightness Control, Left/ Right, Menu (OK), Power On/Off, Up/Down OSD Languages: English, French, German, Italian, Spanish, Russian Other convenience: Kensington lock compatible Plug & Play Compatibility: DDC/CI, sRGB, Windows 98/ME/2000/XP/Vista
Complies with: Energy Star Consumption (On mode): 34 W (Typical) Consumption (Off Mode): < 1 W Power LED indicator: Operation - green, Stand by/ sleep - Amber Power supply: Built-in, 100-240VAC, 50/60Hz
Issue date 2009-08-06 Version: 6.0.10
2009 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com
12 NC: 16883 EAN: 95623 9