TV is searching One moment please.
Automatic installation J Start Stop 1 BBCBBCCNN. K

Manual installation

Searching for and storing TV channels is done channel by channel. You must go through every step of the Manual installation menu.
Selection mode is only present and lights up if the country selected also offers the channel option (C-channels for aerial channels, S-channels for cable channels). You can choose either channel or frequency mode.
Manual installation (Selection mode) J System System K Programme no. Search Fine tune Store
Select the TV system Select the country or part of the world from where you want to receive the TV channel. If you are connected to a cable system, select your country or part of the world where you are now located. Press the cursor down and enter the programme number with the digit keys. Search for a TV channel Press the cursor left/right. The frequency or the channel number increases until a TV channel is found. Direct selection of a TV channel If you know the frequency, the C- or S-channel number, enter it directly with the digit keys 0 to 9. Ask for a list from your cable company or dealer, alternatively consult the Table of frequencies on the inside backcover of this handbook.
Fine tune In case of poor reception, you can improve the reception by adjusting the frequency with the cursor left/right. To store your TV channel, select Store and press the OK key.

Repeat steps

& to ( to store another TV channel.
To exit from the menu press the MENU key on the remote control.

Give name

INSTALLATION Menu language Country Automatic installation Manual installation J Give name Reshuffle Favourite programmes SETUP
It is possible to change the name stored in the memory or to assign a name to a TV channel which has not yet been entered. A name with up to 5 letters or numbers can be given to the programme numbers 0 to 99. For example SUPER, BBC1,. Between 99 and 0 you can also name any peripherals that are connected to a euroconnector.
Give name EXT1 EXT2 FRONT J BBCBBC2 3. 4. 5.

& ( !

Select Give name in the INSTALLATION menu and press the OK key. Select the programme number. Press the OK key. Select the character with the cursor up/down. Select the following position with the cursor right. Select the following character. Press the OK key when finished. Press the MENU key to return to the INSTALLATION menu. Space, numbers and other special characters are located between Z and A.
Reshuffle the programme list
According to your preference you can change the order of the stored TV channels.
Reshuffle EXT1 EXT2 FRONT 0 J 1 CNN 2 BBC2 3. 4. 5.

& (

Select Reshuffle in the INSTALLATION menu and press the OK key. Select the programme number you want to exchange. Press the OK key. Select the new number you want to exchange it with. Press the OK key. Repeat the operation until all TV channels are allocated as you like. Press the MENU key to return to the INSTALLATION menu.

Select Favourite TV channels
After leaving the installation you can browse through the TV channels by pressing the - P + key. Only those TV channels which are in the favourite list will be displayed. Non-favourite TV channels can still be selected with the digit keys. By default all stored channels are added to the favourite list.
Favourite programmes J 4 5. No Yes Yes No No Yes

& (

Select Favourite programmes in the INSTALLATION menu and press the OK key. Select your favourite programme number. Select Yes or No with the cursor left/right. Repeat for every TV channel you want to make a favourite or a non-favourite TV channel. Press the MENU key to return to the INSTALLATION menu.
In order for NEXTVIEW to function properly, the first TV channel from the favourite list should also broadcast the correct local date and time via teletext.
INSTALLATION Menu language Country Automatic installation Manual installation Give name Reshuffle Favourite programmes J SETUP SETUP J Digital Sources sources Decoder/Descrambler (Picture tilt) Information line Factory settings Auto format Auto Surround INSTALLATION Decoder/Descrambler J Programme Decoder status

Install TV Setup

The Setup menu allows you to adjust initial settings, i.e. those which are not related to the installation of the TV channels. The Setup menu contains items that control the settings of the TVs functions, features, services and peripherals you may have connected.
Use the cursor in the up/down, left/right directions to select the menu item. Use the OK key to activate. Use the MENU key to return or switch menu off.

yes/no

Digital sources See Connect Peripheral Equipment, p. 22 to connect your digital equipment, like a DVD, a digital satellite tuner or a similar digital device.
Define Decoder/Descrambler programme numbers If a decoder or a descrambler is connected, see p. 21 you can define one or more programme numbers as decoder programme numbers. Press the cursor left/right to select the input used to connect to your decoder Off, EXT1 or EXT2. Select Off if you do not want the selected programme number being activated as a decoder programme number. Select EXT2 when the decoder is connected to your EasyLink video recorder. When selecting the decoder, the message EasyLink: downloading presets. appears on the screen.
Picture tilt (if provided) Select Picture tilt with the cursor up/down. Keep the cursor left/right pressed to adjust the rotation of the picture.

Information line Select On and after the selection of a TV programme or after pressing the i key on the remote control, a TV channel which broadcasts teletext may transmit the name of the TV channel, the programme name or another message.This is displayed on screen next to information about sound and picture format. When selected Off, only sound and picture format information is displayed after the selection of a TV channel or after pressing the i key.
Factory settings Select Factory settings and press the OK key to restore picture and sound settings, predefined in the factory.
Auto format Selecting Yes causes the screen to automatically fill as much of the picture as possible when TV programmes are not carrying special signals detecting the correct screen format. With the q key on the remote control you can still select other picture formats. See p. 10.
SETUP Digital Sources Decoder/Descrambler (Picture tilt) Information line Factory settings Auto format J Auto Surround INSTALLATION
Auto Surround Sometimes the broadcaster transmits special signals for Surround Sound encoded programmes. In that case, the TV automatically switches to the best Surround Sound mode when Auto Surround is switched on. Virtual Dolby* Surround will be reproduced, see p. 9. Overruling this surround mode remains possible.
Installation Select Installation and press the OK key to return immediately to the INSTALLATION menu.
To exit from the menu press the MENU key repeatedly.
* Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories.
Use of the remote control

B Instant record

If your video recorder has the EasyLink function the INSTANT key for record can be operated in the TV mode.

Video recorder see p. 24

Standby The set is switched off.To switch the TV on again, press - P + or the digit keys. If your EasyLink video recorder has the system standby function and you press the standby key for 3 seconds, both the TV and video recorder are switched to standby. Your TV consumes energy in the standby mode. Energy consumption contributes to air and water pollution. We advise to switch off your TV overnight instead of leaving it on standby.You save energy.

guide on/off see p. 14

Q Surround modes

Incredible Surround

Main menu on/off see p. 11
OK Press this key to activate your choice, when in the menus. Volume Press + or - to adjust the volume. Mute Temporarily interrupt the sound or restore it. Programme selection To browse through the TV channels activated in the Favourite Programme menu.
In MONO sound mode, this feature, when switched on, enables you to hear a spatial effect of sound. In STEREO sound mode, when Incredible Surround is selected, it seems as though the loudspeakers are spread further apart from one another.

Dual Screen

NEXTVIEW

/ Teletext Guide

Today, most broadcasters in Europe, are offering teletext pages containing their programme schedule of today.These pages can be requested by switching the TV to Teletext Guide. An increasing number of broadcasters are offering an extended programme guide service called NEXTVIEW. NEXTVIEW is a new way of presenting programme schedules and offers more features than common teletext. With NEXTVIEW it is possible to show for instance all the movies coming tonight. Both facilities are integrated in this TV: NEXTVIEW and Teletext Programme Guide. If a TV channel supports NEXTVIEW then the TV will automatically present the NEXTVIEW programme schedule. If the TV channel supports just teletext, then the TV will switch automatically to Teletext Guide. Both facilities are offering the same functions: record, remind and info. However in case of Teletext Guide the broadcaster is responsible if these functions are possible. You can search for the programmes you want to watch up to 7 days in advance. It is also possible to search for a programme by theme, e.g. sport, movie, etc. Once a programme has been selected it can be tagged, to remind you, or to record on the video recorder automatically (provided the video recorder is equipped with NEXTVIEWLink Level 20), once, daily, weekly or series. Teletext Guide/NEXTVIEW also allows direct access to detailed information about programmes if provided by the broadcaster. The broadcaster is responsible for the contents of the information. The TV is responsible for the capture of that information and for the presentation to the user.

selection

Use of the Teletext Guide/NEXTVIEW menus
Press the key on the remote control to display/cancel the Teletext Guide/ NEXTVIEW menu. Use the cursor in the up/down, left/right directions to select the date, CHANNEL for the channel guide, THEME for the theme guide, OVERVIEW for an overview of all the programmes which are marked as reminders or for recording, the programme guide page number or to enter the programme list.
Monday 9 Oct Channel Theme BBC1 Record Remind Info Whats on now Preview Themes Ratings 18:03 Overview

Teletext Guide

Channel Overview BBC1 BBC2 p.202 p 01 02. Record Remind Info BBC1. 226/3. 231

11.03 14.35 17.50

Enter the proper programme guide page number with the digit keys or with the P + keys. Press the cursor left/right to run through the subpages. Select a programme with the cursor up/down. Press one of the colour keys to select one of the basic functions (if available); record, remind, info. See Basic functions further on. Press the OK key to return to the header area again.
Select a programme with the cursor up/down. Press one of the colour keys to select one of the basic functions (if available); record, remind, info. See Basic functions further on. Press the OK key to return to the header area again.

Select Picture/NEXTVIEW-Teletext Guide
Press the key. Press the b key. The screen is divided into two parts: the left side for the normal main picture, the right side for NEXTVIEW/Teletext Guide. Press the b key to return to a full NEXTVIEW/Teletext guide screen, or press the key to return to a full picture screen.
Acquisition and updating of

information

Acquisition and updating of NEXTVIEW is done when you are watching a TV channel supporting NEXTVIEW.
Video recorder restrictions with
The Record item and the automatic recording will only be present and possible if your video recorder is equipped with NEXTVIEWLink. Your video recorder should be connected to EXTERNAL 2. See Connect Peripheral Equipment, p. 21. The daily, weekly and series options, the number of recordings set and the way overlapping recordings are managed, depend on the type of video recorder you have.When all video recorder timers are full, the item Record in the menu will not be present. Upload video recorder overview When the TV is switched on, the timer recordings are uploaded to the TV to check if any manual addition or deletions have been done.This is shown in the overview. The video recorder manages and removes timer recordings when performed. Some NEXTVIEWLink video recorders do not allow a daily programming of the recording to start on a Saturday or Sunday. In this case the item daily will be removed from the menu on those days.

Teletext

colour keys to select
OK key to activate cursor to select pages
Most TV channels broadcast information via teletext. Each channel which broadcasts teletext transmits a page with information on how to use its teletext system. Look for the teletext page with the main index (usually p. 100). Depending on the TV channel, teletext is transmitted in different systems. The colours used in the options line correspond with the colour keys of your remote control.

About Easy Text

Easy Text considerably reduces the waiting time (on condition that the teletext broadcast of the particular TV channel is received for at least half a minute) by : a direct selection of previous and following pages which are in transmission and of the pages referred to in the options line a habit watcher list: frequently used pages are put automatically in a list of preferred pages, so that they are immediately available the precapturing of the page numbers referred to in the displayed page the precapturing of all the subpages.
Switch Teletext on and off
Press b to switch the teletext on or off. The main index page appears on the screen together with two information lines at the top and one option line at the bottom of the screen. Remark: if the displayed teletext characters on screen do not correspond with the characters used in your language, press the X key repeatedly to select Language group 1 or 2.

Select a Teletext page

With the digit keys Enter the desired page number with the digit keys. The page counter seeks the page or the page appears immediately when the page number has been stored in the memory. A message appears when you have entered a non existent or incorrect page number. Page numbers beginning with 0 or 9 do not exist. Choose another number. With the option line Select with the colour keys, corresponding to the coloured options at the bottom of the screen, the desired subject.

Select Picture/Teletext

Select a TV channel which broadcasts teletext. Press the b key. The screen is divided into two parts: the left side for the normal main picture, the right side for teletext broadcast by the selected TV channel. Press the b key to return to a full screen picture or press the b key to return to a full teletext picture.
Quickly run through the teletext pages
Press the cursor up/down or the - P + key to run through the previous or the following pages.
Select the previously selected txt page

Press the 0 key.

Select the index teletext page
Press the white colour key to display the main index (usually p.100). Only for T.O.P teletext broadcasts : T.O.P orders the pages in categories and adds other possibilities of enhancing ease of use. Press i. A T.O.P. overview of the teletext subjects available is displayed. Not all TV channels broadcast T.O.P. teletext.When the teletext system is not T.O.P. teletext, a message appears at the top of the screen. Select with the cursor up/down, left/right the desired subject and press the OK key.
OK to activate cursor to select subpages

Select subpages

When a selected teletext page consists of different subpages, one of the subpages appears on the screen. The coloured number in the first information line refers to the displayed subpage. The other subpages can be selected in 2 ways : With the cursor left/right The other subpage numbers appear in white as soon as the transmission has found them.They are stored in the memory so that they are available while the teletext page is on screen. Select with the cursor left/right the previous or the following subpage. With the U key Enter the subpage number yourself: Press U. Enter the desired subpage with the digit keys : e.g. 3 for the third page of seven subpages. The TV searches for the selected subpage. Automatically rotating subpages: Press U again to cancel the entered digit key for the subpage. Now the subpages rotate automatically.
Press U again to select the subpages with the cursor left/right again.
Special teletext functions
Hold Press S to stop the automatically rotating of the subpages or to stop the page counter from seeking when you have entered a wrong page number or when the page is not available. Enter another page number. Enlarge Press h repeatedly to display the upper part, the lower part and then to return to the normal page size.When the upper part is displayed, you can scroll the text, line by line using the cursor up/down. Reveal Press f to reveal/conceal the hidden information, such as solutions to riddles and puzzles.

Select Continuous Subtitles
TV channels with teletext often transmit programmes with subtitling. For each TV channel you can store a subtitle page which will be displayed continuously if the programme being broadcast is transmitted with subtitles. Switch on teletext and select the proper subtitle page from the index. Switch off teletext. Now the subtitle page is stored for the selected TV channel. Once subtitles have been stored and Subtitle On has been selected they will automatically be displayed on the selected TV channel if subtitles are in the transmission. Select Subtitle On or Off in the Features menu, see p. 12. The subtitle symbol j appears when Subtitle On is selected. Remark: you are in teletext mode, so only teletext functions are available.

Keys on top of the TV

Should your remote control be lost or broken you can still change some of the basic picture settings with the keys on top of the TV. Press the M key repeatedly to select Volume, Brightness, Colour, Contrast. Press the P - or + keys to carry out the selected adjustment. When the menu adjustment is not displayed, the P- or + keys enable you to select the TV channels, the V - or + keys to adjust the volume. The selected adjustment automatically switches off when no action has been executed for 10 seconds.
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV.The following connection diagrams show you how to connect them.

Video recorder

Connect the aerial cables 1, 2 and, to obtain the optimum picture quality, eurocable 3 as shown opposite. If your video recorder is provided with the EasyLink function, the eurocable supplied with it should be connected to EXTERNAL 2 to benefit from the EasyLink functionality. If the eurocable 3 is not used the following steps are required:
Search for and store the test signal of the video recorder
Unplug the aerial cable 1 from the aerial socket x of your video recorder. Switch on your TV and put the video recorder on the test signal. (See the handbook for your video recorder.) Search for the test signal of your video recorder in the same way as you searched for and stored the TV signals. See Installation, Searching for and storing TV channels, Manual installation, p. 5. Store the test signal under programme number 0 or between 90 and 99. Replace the aerial cable in the aerial socket x of your video recorder after you have stored the test signal.

Decoder and video recorder Connect a eurocable 4 to your decoder and to the special euroconnector of your video recorder. See also the video recorder handbook. See Define Decoder/Descrambler prog. numbers, p. 7. You can also connect your decoder directly to EXTERNAL 1 or 2 with a eurocable.
Video recorder and other peripherals (except Digital Sources) &
Connect the aerial cables 1, 2 and 3 as shown opposite. Better picture quality can be obtained if you also connect eurocable 5 to EXTERNAL 2 and a eurocable 4 to EXTERNAL 1. Look for the test signal of your peripheral in the same way as you do for a video recorder. When a video recorder is connected to EXTERNAL 1 you can only record a programme from your TV. Only when a video recorder is connected to EXTERNAL 2 it is possible to record a programme from your TV as well as from other connected equipment. See Record with your video recorder, p. 26. Note: EXTERNAL 1 can handle CVBS and RGB, EXTERNAL 2 CVBS and Y/C and RGB.

1 EXT. 2

Camera & camcorder &
Connect your camera or camcorder to sockets at the right side of your TV. Connect the equipment to VIDEO 2 and AUDIO L 3 for mono equipment. Press the X key repeatedly to select the sound coming from one or both loudspeakers of your TV.

IO AUD O VIDE EO SVID

For stereo equipment also connect AUDIO R 3. S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S-VIDEO input 1 and AUDIO inputs 3.
Digital equipment (DVD, digital satellite tuner,.)
Connect your digital equipment with a eurocable 1 to one of the euroconnectors (EXT1 or EXT2), or with a cinch cable to the VIDEO input at the right side of the TV (see illustration above).
INSTALLATION Menu language Country SETUP J Digital Sources sources Decoder/Descrambler (Picture tilt) Information line Factory settings Auto format Auto Surround INSTALLATION
Automatic installation Manual installation Give name Reshuffle Favourite programmes J SETUP
Select Digital sources in the Setup menu of the INSTALLATION menu and select: None if you have no digital source connected, EXT1 or EXT2 if you have connected your equipment to a euroconnector, FRONT in case you have connected your equipment to the right side of the TV. Press the MENU key to switch off all menus. Note: the low quality of some digital picture material may be the cause of digital image distortion. In this case select Eco under the SMART PICTURE a key on the remote control as this setting is intended to improve distorted picture quality.

Headphone

Insert the plug into the headphone socket L at the right side of the TV. Press on the remote control to switch off the internal loudspeakers of the TV. The headphone impedance must be between 8 and 4000 Ohm. The headphone socket has a 3.5 mm jack. In the SOUND menu select Headphone volume to adjust the headphone volume, see p. 11.
Audio equipment / Amplifier
Connect the audio cables to the audio input of your audio equipment and to AUDIO L and R at the back of your TV. You can listen to your TV sound via your audio equipment.
If you want to connect more equipment to your TV, consult your dealer.
To select connected equipment
If the TV is connected to a video recorder with the EasyLink function, in some cases the TV will be switched on, even when it was in standby. (E.g. playback tape,.) This is not possible when Child lock On is selected.
Equipment connected with an aerial cable only : Select the programme number under which you have stored the test signal with the digit keys. Equipment connected to a euroconnector or to the right side of the TV Press the w key repeatedly to select EXT1, EXT2 or FRONT, according to where you connected your equipment at the back or the right side of your TV. Remark : Most equipment (decoder, video recorder, satellite receiver) carries out the switching itself. If you want to change to TV channels? Enter the programme number of the TV channel which you want to watch with the digit keys or press the w key repeatedly to select TV.
Audio and video equipment keys
Most of the audio and video equipment from our range of products can be operated with the remote control of your TV. Video recorder Keep the VCR key on the left side of the remote control pressed and simultaneously press: - P+ 0 to 9 B for record, for rewind, for stop, for play, for fast forward, for selecting 1- or 2-digit programme numbers from the video recorder, for sequential programme selection from the video recorder tuner, to select a programme number from your video recorder tuner, to switch the video recorder to standby
These keys function with equipment which use the RC5 signalling standard.
If your video recorder has the EasyLink function, the key INSTANT for recording, can be operated in the TV mode. If your EasyLink video recorder has the system standby function, when you press the B key for 3 seconds, both TV and the video recorder are switched to standby.
Satellite receiver Press the OK key simultaneously with the digit key 1. Now you can operate your satellite receiver with the remote control of your TV. Keep the MODE key on the left side of the remote control pressed and simultaneously press:
to switch the SAT menu on or off to select a one or two digit programme number from the satellite receiver.
DVD player Press the OK simultaneously with the digit key 2. Now you can operate your DVD player with the remote control of your TV. Keep the MODE key on the left side of the remote control pressed and simultaneously press:

to switch the DVD menu on or off to select a DVD title to select a DVD chapter to select your choice of audio language to search down stop play to search forward to select a programme number from your DVD to enter the selected menu item

b 0 X 0-9 OK

, C, f, h, w have no function Note: after replacing the batteries the default operational equipment is the satellite receiver.
These keys function with equipment which use the RC6 signalling standard.
Record with your video recorder
To record S-VHS quality, connect an S-VHS peripheral directly to the video recorder. Record a TV programme Select the programme number on your video recorder. Set your video recorder to record. See the handbook for your video recorder. Switching programme numbers on your TV does not disturb recording ! Record a programme on your video recorder connected to EXTERNAL 2 from Audio/Video equipment connected to EXTERNAL 1 or to sockets on the right side of the TV Switch on the equipment. Select the right external on your video recorder. Set your video recorder to record. You record what you are watching on the screen. Do not switch programme numbers or do not switch off your TV when you are recording !
Record with your video recorder with EasyLink
If you have connected an S-VHS video recorder provided with the EasyLink function, you can record S-VHS-quality from an S-VHS peripheral connected to the right side of the TV. (E.g. from an S-VHS camcorder.) In TV mode, it is possible to start a direct recording of the programme which is being displayed on the TV screen. Press the INSTANT record key of the remote control. The video recorder switches on from standby and a message of what is being recorded appears on the screen. The video recorder starts recording the programme you are watching. Switching programme numbers on your TV does not disturb recording ! When recording a programme from a peripheral connected to EXTERNAL 1 or FRONT, you can not select another TV programme on the screen. To watch TV programmes again, press the programme number you want to select twice. Attention: the recording is stopped and your video recorder switches to standby.
Record with your video recorder with

NEXTVIEWLink

If your video recorder is equipped with NEXTVIEWLink, and you tagged one or more programmes to be recorded automatically in the NEXTVIEW mode, it is not necessary for the TV to be in the standby mode or switched on for the recording to start.

Record

Care of the screen Clean the TV with a slightly damp soft cloth. Do not use abrasive solvent as it can damage the TV screen. No picture Is the aerial connected properly? Are the plugs tightly connected in the aerial socket? Is the aerial cable in good condition and does it have suitable plugs? Are the connection facilities to a possible second TV in good condition? If in doubt, consult your dealer. No solution Switch your TV off and then on again once. Never attempt to repair a defective TV yourself. Check with your dealer or call a TV technician. End of life directives Philips is paying a lot of attention to produce environmentally-friendly in green focal areas.Your new TV contains materials which can be recycled and reused. At the end of its life specialised companies can dismantle the discarded TV to concentrate the reusable materials and to minimise the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations. How to dispose of batteries? The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many countries batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations.

Poor Picture Have you selected the correct TV system? Is your TV or house aerial located too close to loudspeakers, non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or teletext unrecognisable? Check if you have entered the correct frequency. See Installation, p. 5. Are brightness and contrast out of adjustment? Select Factory settings in the Setup menu, p. 7. Sometimes poor picture quality is possible when having activated an S-VHS camera or camcorder connected to the right side of your TV and another peripheral is connected to EXT1 or EXT2 at the same time. In this case switch off one of the other peripherals.
No sound No sound on any channel? Check the volume isnt at minimum. Is the sound interrupted with the mute key ?
Remote control If your TV no longer responds to the remote control, the batteries may be dead. You can still use the M key and the -/+ keys at the top of your TV.
Menu Have you selected the wrong menu? Press the MENU key again to exit from the menu.
a ACI, 5 active control, 10 automatic installation, 5 auto format, 7 auto surround, 8 AVL, 11 b bilingual broadcast, 10 c camcorder, 22 child lock, 12 continuous subtitles, 20 country, 4 d decoder/descrambler, 7 digital scan, 11 digital sources, 22 dual screen, 13 DVD, 25 dynamic contrast, 11 e easy text, 18 eurocable, 21 f factory settings, 7 favourite programmes, 6 freeze, 10 frequency, 5 g give name, 6 graphic equalizer, 11 h headphone, 23 hue, 11 i incredible surround, 9 info on screen, 9 information line, 7 interrupt the sound, 9 l language, 4 m manual installation, 5 menu language, 4 n NEXTVIEW, 14 nicam, 10 p picture adjustments, 11 picture format, 10 picture tilt, 7 programme selection, 9 programme list, 12 r recording, 26 reshuffle, 6 s satellite receiver, 25 search for TV channels, 5 setup, 7 sleeptimer, 12 smart picture and sound, 10 sound adjustments, 11 stereo, 10 store TV channels, 4 subpages teletext, 19 S-VHS, 26 switch TV on, 3 t teletext, 18 v video recorder, 21 Virtual Dolby Surround, 9 volume, 9

Tips & Index

Glossary
100 Hz 100 Hertz provides a superior solution to the problem of picture flicker which is particularly noticeable with larger screen sizes. In a conventional TV, the picture area is scanned 50 times a second (50 Hertz) a frequency which is still detectable by the human eye in the form of a flickering picture. In 100 Hertz sets, the picture area is scanned at a rate of 100 times per second (100 Hertz). At this frequency, the eye cannot detect flicker, resulting in a clearer picture which is more relaxing to the eye. Easy Link Digital intelligent ESI bus-system between TV and VCR (Scart connection required). Turns source selection and control into a one-button operation. Smart Picture and Sound controls Keys on the remote control to select predefined picture and sound settings.

Easy Text Teletext memory that automatically memorises Teletext pages and gives you instant access to them. Euroconnector A 21-pin connector system enabling you to simply connect various types of audio/video and computer equipment.
Sleeptimer Function with which you can set a time period after which the TV should switch itself to standby.
Automatic Channel Installation (ACI) Automatically installs all TV channels in the same order as offered by your cable company, provided of course that the data is transmitted. It also automatically includes programme number and programme name. With ACI, channel installation is fully automatic, simple and fast.
Picture Freeze TV mode which allows you to freeze a certain image in order to study a specific detail at ease, e.g. to make notes of certain programme information like phone numbers.
Menu On-screen display of functions and facilities in a well-organised survey, which you can select using your remote control.

NEXTVIEW NEXTVIEW

Child lock Feature to prevent unauthorised use of your TV.
Digital Scan If you look at a television screen you will see small imperfections in the picture caused by line vibration. Digital Scan (an internal process) removes interline flicker. When combined with 100 Hz, you will see a totally stable image.
is a new feature to assist the TV and VCR user in selecting the programmes she or he likes to watch from a television programme guide on the screen. It enables the user to see a description of every programme, and mark interesting programmes to be reminded (auto TV on) or recorded (NEXTVIEWLink video recorder required).
Teletext See also Easy Text WST:World Standard Teletext. FLOF: Full Level one Features. System applied by the BBC, RVE. that provides a fast access to the teletext pages. TOP:Table of (Teletext) Pages. German system for an easy access to the teletext pages.
NTSC The broadcasting system used in the USA, Japan and parts of South America and Southeast-Asia.
Tint TV-function to modify the general colour balance between cool and warm and to adjust it according to your personal preference.