May also apply to 26PFL7532D/05, 26PFL5522D/05 and 32PFL7532D/05. Diagnosis and repair of this Philips LCD television.
This video describes the process of how the software of Philips televisions can be upgraded. It shows how to find the software on ...
Sound coming from psu as screen flashed(pre black line down middle)
Re-tuning: PHILIPS Freeview TVs
12 Steps (Steps 1-5)
This guide can be used to help you re-tune any of the following products with the remote control below: *PFL5522D series, *PFP5532D series, *PFL5602D series, *PFL7662D series, *PFL7762D series
* Your model size appears here
ake sure your box is on and press 80 M for the BBC News channel
1) Press the Digital Menu button
2) Use the Down Arrow button to select Installation on the fifth line of the menu and press the Right Arrow button 3) Use the Down Arrow button to select Service Setup on the second line of the menu and press the Right Arrow button 4) Use the Down Arrow button to select Reinstall All Services and press the Right Arrow button 5) Press the Zero button four times or enter your own PIN if you have changed it.
Manufacturer Helpline: 6015
email: Online form at www.philips.co.uk
* This process may affect any saved information stored on your product, including your favourites list. Please consult your instruction manual or contact the ...
Corrected Codes for Programming your TiVo remote
Your TiVo remote has buttons for controlling the Power, Mute, and Volume of your TV. This allows you to set aside your TV remote, and use only the TiVo remote. These buttons need to be set to emit the correct Infrared codes for your Television brand. Normally, these codes can be found within TiVo's on screen menus, under Setup, TV/AV Setup. However, we are shipping you an improved version of the TiVo remote, and consequently the Infrared codes that are listed in TiVo's onscreen display are incorrect. Please use the codes on this leaflet to program your remote instead. Instructions: 1. Locate your TV brand on this list. It will have one or more 4-digit codes listed. 2. Cover the end of the remote with your hand to shield the infrared emitter and, on the TiVo remote, press and hold the TIVO and TV POWER buttons simultaneously for about three seconds, until the TiVo remote's LED illuminates. Release the buttons and the LED will remain illuminated. 3. Use the ...