cover 2158.3

09-07-2003

Pagina 1

Pagina 2

315 2158.3 (16X24)

Contents

Installation

Preparation 2 Keypad on top of the TV 2 Your remote control 3-5 Use of the menus and the menu system 6 Menu Info / Remote Control Info 7 Select the menu language 7 Store TV channels Automatic installation 8 Manual installation 8 Give name 9 Reshuffle the programme list 9 Select favourite TV channels 9 Install TV setup General 10 Source 10 Demo 10

Operation

Help? If this instruction manual does not give an answer or if Before calling service do not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet. Please, have the Model and Product number which you can find at the back of your television set or on the packaging, ready, before calling the Philips helpline. Model: Product No:
TV menu Picture menu 11 Sound menu 12 Features menu 12-13 Teletext 13-15
Connect Peripheral Equipment
Connecting and selecting equipment 16-19 Remote control functions for peripherals 19 Recording 19 Before calling service 20 Tips 21 Glossary 21 Specifications 22

English

Preparation & Place the TV on a solid surface.
For ventilation, leave at least 5 cm free all around the TV.
Insert the 2 batteries supplied (Type R61,5V). The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many countries exhausted batteries may not be disposed of with your household waste. Please check on how to dispose of exhausted batteries according to local regulations. Note: this remote control functions with TVs and other equipment which use the RC6 signalling standard.

min. 1m

Do not place the TV on a carpet. To prevent any unsafe situations, do not place any objects on top of the TV. Avoid heat, direct sunlight and exposure to rain or water. Keep mobile telephones at a safe distance to avoid disturbances in picture and sound.
Insert the mains plug of the TV in the
wall socket having a mains voltage of 220V240V. To prevent damaging the mains (AC) cord which could cause a fire or electric shock, do not place the TV on the cord.
( Switch the TV on : Press the power
switch A on the front of your TV. A green indicator on the front of the TV lights up when the screen is on. If the indicator is red, press the -CH+ keys on the remote control. The green lamp blinks every time you press a key on the remote control.
Insert the aerial plug firmly into the aerial
socket x at the back of the TV. For best picture quality use the suppressor-aerial cable supplied.
Remote control: Remove the cover of the

battery compartment.

AA - 1,5V

Keypad on top of the TV

CH M V
Should your remote be lost or broken you can still change some of the basic settings with the keys on top of your TV. Press the V - or + key to adjust the volume. Press the CH - and + key to browse through the TV channels or sources stored and to select them. Press the M key to summon the main menu. Use the V - and + keys to select the menu items in the horizontal axis. Use the CH - and + keys to select submenu items in the vertical axis. Note: - Sometimes not all the menu items are visible on the screen. Press the CH + key to reveal all items. - Exit lets you dismiss the menu. Select Exit and press the M key.

Pagina 3

Use of the remote control
Use the on-screen info for more information about the different keys. See p. 7.
v Select peripherals Press this key repeatedly to select AV1, AV2, AV3, AV4 or SIDE, according to where you connected the peripherals (p. 19).

VCR DVD AMP AUX

B Standby The set is switched off and the red indicator lights up. To switch the TV on again, press again.
Press one of these keys to use the remote control directly in the video recorder, DVD, amplifier or other auxiliary mode (CD, SAT). A green indicator lights up. To return to TV mode, press the key again or wait for the indicator to dim (20 sec.) b Dual screen Press the b key to switch on Dual screen.The screen is divided into 2 parts: the left side for the normal main picture, the right side for teletext broadcast by the selected TV channel. To operate teletext, see p. 13. Press the q key to select a vertical squeezed or a non vertical squeezed picture size. Press +CH- to run through the teletext pages. When in Teletext Dual screen, press the b key to return to a full picture screen or press the b key to return to a full Teletext screen. S Freeze To activate/de-activate the frozen picture and to hold a teletext page. See p. 14. no function

Video recorder see p. 19

no function Teletext on/off p. 13 Main menu on/off p. 11

DVD AMP AUX

PIXEL PLUS
OK Press this key to activate your choice, when in the menus.
Press + or - to adjust the volume.

MENU OK

Interrupt the sound or restore it.
ACTIVE SMART CONTROL SMART
CH Programme selection To browse through the TV channels and sources stored. Only those channels which are in the favourite list can be selected with the - CH + keys. 0/9 Digit keys To select a TV channel. For a two digit programme number, enter the second digit within 2 seconds. To switch immediately to a selected one digit TV channel, keep the digit key pressed a bit longer.

PICTURE

Screen information Press to display information about the selected TV channel and programme.
Menu / Remote Control information When the menu is on screen, press i to display info on the selected menu item.While the menu info is displayed, press any key to display remote control info. See p. 7.

Pagina 4

Smart surf With this feature you can easily switch between up to 9 different TV channels/sources. In the menu system, you can set Smart surf to 2- or 9-programme. Press this key to select the previously viewed TV channel or source in case of a 2 programme surf, or to select the surf ring in case of a 9 programme surf. In case of a 9 programme surf, a list appears at the right side of the screen. On top, the most recent programme is displayed.The puck is on the channel number currently viewed. Press the 0 key to turn to the next channel in the list or press cursor up/down to immediately select the desired TV channel of the list.
To add a new channel or source: tune to the channel or source you wish to add. Press the 0 key. Press the cursor right to add. If there are already nine channels/sources in the list, the one at the bottom of the list will be removed. To remove a channel or source: select the channel number you want to remove. Press the 0 key. Press the cursor right to remove. Press the OK key or wait for the time out to dismiss the Smart surf display.
U Time display: The time is displayed on the screen. h Teletext function p. 14 Q Surround mode Incredible surround With stereo transmission, and when Incredible surround is selected, it seems as though the loudspeakers are spread further apart from one another. Virtual Dolby surround Optimal with Dolby surround signals Enables you to experience the effect of Dolby Surround Pro Logic, reproducing a rear sound effect. See Sound menu, 3D effect, p. 12. Note:You can make the same selection in the Sound menu, surround mode, p. 12. Z Zoom on/off Press the zoom Z key to activate/ deactivate the zoom function. Press the OK key repeatedly to select one of the zoom magnifications (x1, x4, x9, x16). Use the cursor up/down, left/right to shift the selected zoom window over the screen with the cursor. The zoom window is reset after: selecting another TV channel, another picture format or when another picture format is selected automatically. 4

return or switch main menu on/off cursor to select adjustments

OK key to

activate

The menu system

Pipes, balls and a puck

puck pipes balls

Direct selection and control
Menu items are controlled as soon as they are selected by the puck. Only a few items require information with the OK key.

List controls

Picture TV Sound Features
The hierarchy of menus and controls is represented by an animated visual mechanism of pipes, balls and a puck. Unlike a map, however, the animated mechanism constantly shows the current whereabouts, continually expands the view of the immediate neighbourhood. The puck surrounds the ball indicating the users current position in the menu hierarchy.The puck is always present when the menu system is displayed. The puck is divided into 4 parts.They correspond to the directional controls (up/down, left/right) on the remote control.The arrows on the cursor indicate which directions to choose. In this way users can navigate through the menu hierarchy to the control they wish to adjust. When menu items are more numerous than can fit comfortably on the TV display, only a portion are shown. Those omitted are indicated by a cluster of balls which indicates that there are more below.

Digital options

100 Hz Dig. Scan Pixel Plus Double lines
A list control is used to select one or more items from a list of options. Press the right key to move the puck into the list. At least one item is the current value and is highlighted. Moving the puck up or down with the up/down key causes the list to move up or down.

Pagina 7

Menu Info & Press the MENU key and select a menu item or submenu item. Press the i key on the remote control to get information about the selected menu item.
Press the i key again to exit. Remote Control Info & Press the MENU key. Press the i key. Press any key on the remote control (except the cursor keys, the OK, the MENU , the digit, the i and the B keys) and you get information about the pressed key. The normal function of the key is not executed. The moment one of the remote control keys which do not invoke remote control info, is pressed, remote info is cancelled. Press the i key to display the menu that was on screen before a remote control key for info was pressed.

SMART SMART

Select the menu language
& Press the MENU key on the remote control. Use the cursor down to select Install. Use the cursor right to select Language. Follow the instructions on screen. Use the cursor up/down to select your preferred language and press the OK key to confirm your selection. ( Proceed with the Install menu.
Language Install English.

Pagina 8

Store TV channels
Automatic install Install Install Start
You can now search for and store the TV channels in two different ways: using Automatic Installation or Manual Installation (tuning-in channel by channel). Select your choice with the cursor right.
Automatic installation & Select Automatic installation in the
Install menu. Note: All channels must be unlocked in order to autoprogram. If requested, enter your PIN to unlock all channels. (See TV, Features menu, Child lock, p. 15.)
When the Automatic installation is complete, the puck navigates to Install again. The programme list is automatically filled with all the programme numbers of the TV channels transmitted. Note: Channel numbers and names will always be written in Latin characters, even when a language has been selected which uses other characters.

Press the cursor down.

The autoprogramming option label Start appears.
Press the cursor right. The message Searching appears and the
progress of autoprogramming is displayed.

Manual installation

Manual installation Install System Channel Search Fine tune Store
& Select Manual installation in the Install menu. Press the cursor down. Follow the instructions on screen. Note: Search or direct selection of a TV channel. If you know the frequency, enter the 3 digits of the frequency directly with the digit keys 0 to 9 (e.g. 048). Press the cursor down to proceed. Repeat to search for another TV channel.
Searching for and storing TV channels is done channel by channel.You must go through every step of the Manual Installation menu. Press the i key on the remote control to get information about the selected menu item.

Pagina 9

Give name

VCR1 BBC1 BBC2 CNN TVE..

Space A H O V B I P W C J Q X D K R Y EFG LMN STU Z

Delete 0 Special

It is possible to change the name stored in the memory or to assign a name to a TV channel for which a name has not yet been entered. A name with up to 5 letters or numbers can be given to the programme numbers 0 to 99. For example SUPER, BBC1,. Before programme number 0 you can also enter a name for the peripherals that are connected to an external input.

Shift

& Select Give Name in the Install menu and press the cursor down. Select the programme number. Note: keep the cursor up/down pressed to scroll through the programme list and to avoid that the TV tunes to each channel passed by. Press the cursor right. A keyboard appears on the screen. Only European characters are displayed. Note: - Dependent on the language selected in the language menu, the key Special is available or not. Press the cursor right to enter the keyboard. Press the cursor up/down, left/right to select the first character and press OK.
Repeat for every character you want to enter. Select Space to enter a space; Delete to erase the highlighted character in the name entered; Shift to display upper- or undercast characters on the keyboard; Special (when available) to display special characters on the keyboard. Press OK to confirm. Press the cursor left repeatedly when you have finished the name giving of the selected channel or peripheral. ( Select another programme number and repeat steps to (.
Reshuffle the programme list
According to your preference you can change the order of the stored TV channels. & Select Reshuffle in the Install menu and press the OK key. Follow the instructions on screen.
Select Favourite TV channels
& Select Favourite programmes in the Install menu. Select your programme number with the cursor up/down. Select Yes or No with the cursor right. Repeat and for every TV channel or external you want to make a favourite or a nonfavourite TV channel or external. ( To exit the Favourite programmes menu, keep the cursor up pressed.

Pagina 10

Install TV Setup

General

General Setup Menu background Smart surf Factory settings Tilt adjust OSD Channel title Teletext level 2.5 Auto Surround Set/Change code (Colour) (PLL)
This menu allows you to change various settings that are presumably adjusted less frequently than most other settings. Press the i key on the remote control to get information about the

selected menu item.

Auto Surround Sometimes the broadcaster transmits special signals for Surround Sound encoded programmes.The TV automatically switches to the best surround sound mode when Auto Surround is switched On. Set/Change code & Select Set or Change code with the cursor down. If no code exists yet, the menu item is set to Set code. Follow the instructions on screen. If a code has previously been entered, the menu item is set to Change code. Follow the instructions on screen. All number combinations from 0000 to 9999 are valid numbers.

Source

Source Setup
Press the cursor down to select one of the external inputs. Press the cursor right to enter the list of names of peripherals attached to the selected input. Select the peripheral device with the cursor up/down. Once you have selected the source, e.g.VCR, this AV-input will automatically be selected when your remote control is in VCR mode and when you press the v key on the remote control. See p. 19.

AV1 AV2 AV3 AV4 Side

This menu allows you to select the peripheral you connected to one of the external inputs. & Select Source with the cursor right.

Demo menu

TV Setup Demo Install
Auto demo. Dealer demo - Digital options - Light sensor - Comb filter
If Auto demo has been selected the demo will automatically present all the features sequentially in a loop. Press one of the cursor keys to stop the Auto demo. If one of the features has been selected, this particular feature demo will run one time only, until activated again, and the Demo menu will reappear. Select Dealer Demo Select Digital options, Light sensor and Comb filter On or Off to really see the difference in picture quality. In Dealer Demo mode it is possible to change channels with - CH + and to adjust the volume. Note: the Dealer Demo is not part of the automatic sequence and can only be activated separately.
The Demo menu allows to demonstrate the TV features separately or in a continuous loop. & Select Demo in the Main menu with the cursor down. Select Auto demo or one of the features with the cursor right and press the OK key on the remote control. 10

Use of the menus

Pagina 11

TV menu

Press the MENU key on the remote control to summon the main menu.
Use the on-screen Menu-Info, see p. 7, for more information about the menu items.

Picture menu

return or switch main menu on/off cursor to select adjustments OK key to activate

Sound Features

Press the cursor right to select Picture. Select the menu items in the Picture menu with the cursor up/down. Adjust the settings with the cursor left/right or enter the list of submenu items with the cursor right. Select a submenu item with the cursor up/down. Note: To remove the menu background before adjusting the picture settings, see Select TV setup, General, p. 10. Digital options With PAL signals:
Digital Natural motion (100 Hz + Dig. scan + Natural

Picture

TV Contrast Brightness Colour Sharpness Tint Digital options Dynamic contrast DNR Colour enhancement (Hue) Smart picture Picture format

Select the index teletext page
Press the grey colour key to display the main index (usually p.100).

Select Picture/Teletext

Select a TV channel which broadcasts teletext. Press b to switch the teletext on. Press the b key. The screen is divided into two parts: the left side for the normal main picture, the right side for teletext broadcast by the selected TV channel. Press the b key to return to a full screen picture or press the b key to return to a full teletext picture.

Select subpages

When a selected teletext page consists of different subpages, one of the subpages appears on the screen. Press the cursor right to highlight the subpagenumber. Press the cursor up/down to select the next or previous subpage or enter the subpagenumber with the digit keys.

Pagina 14

Special teletext functions
Hold Press S to stop the automatically rotating of the subpages or to stop the page counter from seeking when you have entered a wrong page number or when the page is not available. Enter another page number. Enlarge Press h repeatedly to display the upper part, the lower part and then to return to the normal page size.When the upper part is displayed, you can scroll the text, line by line using the cursor up/down.

Teletext menu

(only available in full screen teletext mode) & Press the MENU key to activate the menu. Press the cursor up/down to select the menu items. Favourite This list contains up to eight favourite teletext pages. Only the pages of the current channel can be selected. & Press the cursor right to add the current page or to select one of the favourite pages to the list. Press the OK key or the cursor right again to add. Press the cursor left to return to the Teletext menu. Search On the keyboard on screen you can type in a word you want to search for in the teletext pages.Whether upper- or lowercase is used has no influence. Searching for page numbers is not possible.
Mon 05 Feb 16:35:19 Menu 100 Favourite Search Cancel

Hypertext

With hypertext you can select and search for pages containing any word or number on the current teletext page. & Make sure you are not in the teletext menu and that the puck is in the upper left corner of the screen. Press the cursor key down to highlight the first word or a number on the page. Use the cursor up/down, left/right to select the word or number you want to search for. Press the OK key to confirm. A message appears at the bottom of the screen to indicate that the searching is going on or that the word or page is not found.
Space A B C D E F G H I J K L M N
WORD NAME TELETEXT FOOTBALL Delete Accept 5 6

14.35. 226 V Y Z 0 17.50 W X. 231

Shift Special

O P Q R S T U
Select Continuous Subtitles
TV channels with teletext often transmit programmes with subtitling. For each TV channel you can store a subtitle page. Switch on teletext and select the proper subtitle page from the index. Switch off teletext. Now the subtitle page is stored for the selected TV channel. Select Subtitle On or Off in the Features menu, see p. 12.The subtitle symbol j appears when Subtitle On is selected.
& Press the cursor left/right, up/down to select the characters, words or functions. Press the OK key to confirm each character selected. Select Cancel to cancel the word or character selected; Space to enter a space; Delete to delete the last character selected; Shift to switch between undercast or capital characters; Special to display special characters on the keyboard. Press the cursor left repeatedly to return to the Teletext menu again.

Pagina 15

Searching a word & Type in the word on screen or select a word from the history list on the right and press OK. Select Accept and press OK again.The message Searching appears.When the word is found, it is highlighted in the teletext page. To continue the search, press the OK key twice.When a word is not found, a message appears. To search for a new word, select Keyboard and press OK. Select the new word. Reveal Reveals/conceals hidden information on a page, such as solutions to riddles and puzzles. Press the OK key to activate. Press OK again to return to the Teletext menu. Cycle subpages Makes the subpages cycle automatically. Press the OK key to activate and to de-activate again.
Timed page To display a specific page at a certain time. & Press the cursor right to select Yes or No. Enter the time and pagenumber with the cursor keys or the digit keys. Note: Teletext does not have to remain switched on. It is not possible to display a timed page when the TV is switched to standby.

Pagina 16

Connect Peripheral equipment
There is a wide range of audio and video equipment that can be connected to your TV.The following connection diagrams show you how to connect them to the back or the right side of the TV. AV1 IN can handle CVBS and YPbPr; AV2 IN CVBS and Y/C; AV3 and AV4 IN digital signals of a e.g. digital HD receiver or Progressive scan DVD; SIDE: CVBS and Y/C.

Recorder

&Connect the RF Antenna 1 to the RF IN socket of your recorder. Connect another RF cable 2 from the output OUT of your recorder to the TVs input 75 x jack. Better playback quality can be obtained if you also connect the Video, Audio Left and Right (only for stereo equipment) AV cables 3 to the VIDEO, AUDIO L and R input jacks of AV2 IN.

Monitor

VIDEO L/Mono AUDIO

S-VIDEO

If your recorder has an S-VHS video jack: For improved picture quality, connect an S-video cable with the S-VIDEO input instead of connecting the recorder to the VIDEO jack of AV2 IN. S-Video does not provide audio, so audio cables must still be connected to provide sound.
Recorder and other A/V peripherals
& Connect your recorder as described above. The MONITOR OUT connectors can be used to record programmes from your TV 4. See Record with your recorder, p. 19. Connect the Video, Audio left and Audio right (only for stereo equipment) cables to the VIDEO, AUDIO L and R input jacks of AV1 IN 5 or the side connections (see p. 18).

OUT IN

L / Mono OEDIV-S AUDIO S-VIDEO
Note: In case of mono equipment, only the left loudspeaker reproduces sound. Use a mono to stereo adaptor (not supplied) for sound reproduction via all internal loudspeakers.

Pagina 17

Satellite Receiver

VIDEO L / Mono AUDIO

& Connect the satellite antenna cable 1 to the satellite receivers SATELLITE IN jack. Connect the Video, Audio left and right (only for stereo equipment), AV cables 2 to the VIDEO, L and R AUDIO input AV1 IN jacks. If your satellite receiver has an S-VHS video jack: For improved picture quality, connect an S-VHS video cable with the S-VIDEO input instead of connecting the satellite receiver to the VIDEO jack of AV2 IN. & Connect your satellite receiver as described above. Connect the RF Antenna or Cable TV cable 1 to the RF IN socket of your recorder. Connect another RF cable 2 from the output of your recorder to the TVs 75 x jack. Connect the satellite antenna cable 3 to the satellite receivers SATELLITE IN jack. ( Connect the AV cables 4 to the satellite receivers AV OUT jacks and to the VCRs AV IN jacks. Connect the recorders AV OUT jacks 5 to the TVs AV2 IN jacks.

OUT SAT IN

Satellite Receiver with a recorder

L/Mono

AUDIO R

OUT IN OUT OUT

SAT IN
DVD player or other accessory digital source equipment
With Component Video Output Connectors

L AUDIO R

Equipment with AV connectors only & Connect the video cables to the equipments AV OUT jacks and to the TVs AV1 or AV2 IN jacks. Connect the audio cables to the equipments AUDIO L and R jacks and to the L AUDIO and R AUDIO AV1 or AV2 jacks on the TV. (According to where you connected the video cables, to AV1 or AV2.) Equipment with an S-VIDEO connector & Connect an S-video cable the AV2 S-VIDEO input. Note: When using the S-VIDEO connector do not connect any device to the video input. Connect the audio cables to the equipments AUDIO L and R jacks and to the L AUDIO and R AUDIO AV2 jacks on the TV.

& Connect the cables of your YPbPr equipment to the YPbPr input AV1 IN sockets on the TV. Note: When using the YPbPr sockets do not connect any device to the video input of AV1. The YPbPr sockets on the TV are compatible with 480i (interlaced, 1 Fh) output signals only, not 480p (progressive scan, 2 Fh). Connect the Audio left and right (only for stereo devices) cables to the AUDIO L and R input of AV1.
Equipment with Progressive scan output (480p, 576p or 1080i 2 Fh)
Connect the equipment to the AV3 or AV4 IN jacks on the TV. See AV3 or AV4 Digital HD input, next page. Note: The labels for the component video sockets may differ depending on the DVD player. Although the abbreviations may vary, the letters B and R stand for the blue and red component signals, respectively, and Y indicates the luminance signal. Refer to the DVD players instructions for use for definitions and connection details.

Pagina 18

AV3/AV4 Digital High Definition input
Y AUDIO Pb Pr L R Pb Pr RGB Y AUDIO L R VIDEO 2Fh 480p/1080i
Connect the equipment with 2 Fh RGB output to the RGB connector and to the L and R AUDIO jacks of AV3. Connect the equipment with 2Fh YPbPr output to the Y, Pb and Pr jacks and to the L and R AUDIO jacks of AV4. See also the manual of your High Definition equipment. Inputs AV3 and AV4 also allow horizontal and vertical picture shift using the remote control cursor left/right, up/down. Note: - 60 Hz normally refers to USA markets and 50 Hz to UK, Europe and Australian markets. - The AV3 RGB (D-15) connector will accept only the signal standards 480p/60 Hz, 1080i/50 Hz and 1152i/50 Hz and is only for TV standards. It is not a PC connector. Warning: in case you notice scrolling images, wrong colours or no colour, no picture, or even combinations of these on your screen, check if the connections are done in the right way.
AV3/AV4 input connectors will accept the following signals from HD set top box (HD-STB) decoders and progressive scan DVD players: ED 480p HD 1080i HD 576p 31.470 kHz 33.750 kHz 31.250 kHz 60 Hz 60 Hz 50 Hz
AV3/AV4 input connectors also accept the following 1250 line HD display formats (available on selected HD-STB decoders) as detailed in the Australian DTV Receiver Standards: HD 1152i (1250) HD 1080i (1250) 31.250 kHz 31.250 kHz 50 Hz 50 Hz

Side connections

Headphone & Insert the plug into the headphone socket L at the right side of the TV.

AUD IO O VIDE EO SVID

Press on the remote control to switch off the internal loudspeakers of the TV. The headphone impedance must be between 8 and 4000 Ohm. The headphone socket has a 3.5 mm jack.

In the SOUND menu select Headphone volume to adjust the headphone volume.
& Connect your camera or camcorder to sockets at the right side of your TV. Connect the equipment to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect AUDIO R 3. S-Video quality with an S-VHS, Hi-8 or Digital camcorder is obtained by connecting the S-Video cables with the S-VIDEO input 1 (instead of VIDEO 2) and AUDIO inputs 3. Note: If you prefer, you can also connect the camcorder to one of the TVs rear AV IN jacks.

Pagina 19

To select connected equipment
Equipment connected to the rear or on the right side of the TV & Press the v key to select AV1, AV2, AV3, AV4 or SIDE, according to where you connected your equipment at the rear or on the right side of your TV. Press the cursor up/down. Press OK. If you want to change to TV channels? Enter the channel number of the TV channel which you want to watch with the digit keys.

VCR Control keys

Press the VCR, DVD, AMP or AUX key according to the equipment you want to operate with this remote control. See Use of the remote control, p. 3. VCR keys After you pressed the VCR key, press one of the VCR keys of the remote control: for record, for rewind, for stop, for play, for fast forward, - CH + for sequential channel selection from the video recorder tuner, 0 to 9 to select a channel number from your video recorder tuner, These keys function with devices that uses the RC5 signalling standard.
Most of the audio and video equipment from our range of products can be operated with the remote control of your TV.
Record with your recorder
To record S-VHS quality, connect an S-VHS peripheral directly to the recorder. Record a TV programme You can record a TV programme using your recorders tuner without affecting your TV.
& Select the channel number on your
Record from MONITOR OUT You can record a programme on your recorder from the TV tuner via MONITOR OUT.
& Switch on the equipment. Select the correct channel on your TV
and the correct input on your recorder.
Set your recorder to record.

recorder.

See the handbook of your recorder. Switching channel numbers on your TV does not disturb recording !
You record the tuner channel of the TV, even when you switch to an AV input using the v key on the remote control. Do not switch channels or switch off your TV when you are recording through MONITOR OUT.

Tips & Glossary

Pagina 22

Specifications

32PW8808 Picture tube size Picture visible area TV system Playback system Antenna input Operating voltage, Frequency Power consumption Audio Output Dimension: Width Height Depth Nett weight (aprrox. only) 32 (740 mm) 27 (680 mm) (3,58) (3,58) 75 ohms - co-axial Refer to the specifications at the back of the TV Refer to the specifications at the back of the TV 2 x 15 W (left, right) 855 mm 540 mm 560 mm 52 kg
International guarantee conditions This product is guaranteed by Philips for a period of one year after the date of purchase against defects due to faulty workmanship or materials.The guarantee covers both parts and labour. Service under guarantee is only provided upon presentation of reasonable evidence (e.g. completed guarantee card or purchase receipts) that the date of the claim is within the guarantee period. The guarantee is not valid if the defect is due to accidental damage (including in transport), misuse of neglect and in case of alterations or repair carried out by unauthorised persons. The guarantee may not apply if the product requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorised or if any damage results from these modifications. Service (during and after guarantee) is available in all countries where this product is officially distributed by Philips. In countries where Philips do not distribute the product, the local Philips Service organisation will also provide Service although there may be a delay if the appropriate spare parts and technical manual are not readily available. These statements do not affect your statutory rights as a consumer. In the event of difficulty please contact the Philips Information Centre in any country (see enclosed addresses).
Printed on recycled paper

Printed in Belgium

3104 315

2158.3

PHONE: (07) FAX : (07) 3846 4701
3 MONTH GOCO WARRANTY APPLIES

PAGE 3:8

PHILIPS - PYE

FLYBACK TRANSFORMERS

TV-HVT 1050 TV-HVT 993 TV-HVT 992 TV-HVT 1164 TV-HVT 1066 TV-HVT 932 TV-HVT 1093 TV-HVT 1068 TV-HVT 127HR TV-HVT 1072 TV-HVT 127 TV-HVT 350 TV-HVT 1195 TV-HVT 1157 TV-HVT 75 TV-HVT 134 TV-HVT 1154 TV-HVT 1157 TV-HVT 1151 TV-HVT 1070 TV-HVT 1151 TV-HVT 1199 TV-HVT 1195 TV-HVT 1191 TV-HVT 1193 TV-HVT 1194 TV-HVT 992 TV-HVT 992 TV-HVT 1081 TV-HVT 1061 TV-HVT 1061 TV-HVT 1061 TV-HVT 1066 TV-HVT 1096 TV-HVT 1096 TV-HVT 1096 TV-HVT 1089 TV-HVT 1071 TV-HVT 1197 TV-HVT 1083 TV-HVT 1069 TV-HVT 1045 TV-HVT 174 TV-HVT 129 TV-HVT 1151 TV-HVT 1089 TV-HVT 1063 TV-HVT 932 TV-HVT 940 TV-HVT 134 TV-HVT 1101 TV-HVT 122 TV-HVT 121 TV-HVT 995 TV-HVT 124HR TV-HVT 124HR

ORIGINAL #

AT2070-40 AT2076-20 AT2077-32 AT2077-35 AT2077-38 AT2077-88 AT2078-B4A AT2079-18 AT2079-41 AT2090-18 AT2101-01 / 02 FCK14A009 JF0501-2133 OV2076-1142-5020 1302.0007 1342.0020 1372.001 2422-531-02149 2422-531-02282 2422-531-02467 2422-531-02468 3104-308-20521 3104-308-20491 3104-308-37393 / 94 3122-138-37741 3122-138-38140 / 38141 3122-138-38142 / 38143 3122-138-38144 3122-138-38220 3122-138-38810 /38811 3122-138-38812 /13 / 14 3122-138-38815/16 3128-138-20660/661/662 3128-138-20671 3128-138-459700, 4802-140-17101 4802-705-17151 4806-140-10649 4806-148-87056 4812-140-4822-114-140 10178
HR7488 HR6078 HR6265 HR6603 HR6549 HR6214 HR8329 HR7541 HR7527 HR7936 HR2101 HR7728 N/A HR8380 HR7630 HR7789 HR8225 HR8380 HR8333 HR7980 HR8333 NA N/A HR8867 HR8864 N/A HR6265 HR6265 HR7549 HR6581 HR6581 HR6581 HR6549 HR6627 HR6627 HR6627 HR8240 HR8124 HR7057 HR7240 HR7678 HR8184 HR7050 HR7505 HR8333 HR8240 HR6489 HR6214 HR7525 HR7789 HR8304 HR1481 HR1490 HR2282 HR2176 HR2176

KONIG#

FAT30186 KN3038901 FAT30167

CROSS REFERENCE

$ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ 38.50 38.50 42.50 59.95 48.50 43.25 59.95 29.75 31.50 58.50 26.50 32.50 59.95 36.50 36.50 29.75 49.95 36.50 39.50 49.50 39.50 59.95 59.95 59.95 69.95 79.95 42.50 42.50 49.95 55.00 55.00 55.00 48.50 49.95 49.95 49.95 59.95 32.50 59.95 39.95 34.50 49.50 38.50 29.75 39.50 59.95 44.50 43.25 31.50 29.75 32.50 22.00 28.50 22.00 26.00 26.00
1182.0887, 276.90289.951 25CG6270 CP110 21PT3722 PHILIPS: 37622, 14GR1224/1234, GR1AX - 14 SETS
FAT 30057 FAT 30199 N/A FAT30205 KN3038201 KN35255N
N/A N/A 1392.9005C 1392.9014R 1392.9004G
37622, 20GR1055/1356, GR1AX - 20 SETS VIS146R PYE: PY1401RC ORIGINAL FOR 29PT2152/75R 29PT4273, 29PT4873 ETC 13420020 PYE: PY101PC CHASSIS GS3 20GR1850, 20GR8350 32PW9532/75M 29PT4273, 29PT4873-79R 1372.001C, 29PT5683-79R 29GX1891, 29GX1893, 29GX1896 ANUBIS-S BB 1372.001C, 29PT5683-79R ORIGINAL PHILIPS FOR 25HT2012 ORIGINAL FOR 29PT2152/75R 32PW8808 32PW8521 32PW9527, 36PW9527, CHASSIS EM5
29FL1770/75 ETC 29FL1770/75 ETC 29FL1770/75 ETC 28ML8765-75B ETC 28ML8765-75B ETC 28ML8765-75B ETC 21PT2622/75 ETC ? ? FAT3853 FAT3819 26CE1991, FCC096 PYE CF1 ETC. 1372.001C, 29PT5683-79R 25CG6270 CP110 15CN4321 NCF-CR CHASSIS GS3 20GR1850 21PT238, 21PT260A/75, 21MMTV-75V KT1 KT2, KT2A1, KT2A2, KT2A3, PYE: 20A-17 T36 KL9, KL9A, KL9A2, KL9A3, KL9S, KT3A1, KT3A2, KT3A3 KT3A, PYE: T39

FAT 10-146 FAT 10-149 FAT10-176 FAT10-176
WE ARE STOCKISTS OF KONIG, ELDOR, AND HR FLYBACK TRANSFORMERS. ITEMS NOT LISTED MAYBE SOURCED FROM THESE MANUFACTURERS. ALL LISTED PRICES INCLUDE GST GO TV PARTS

PAGE 3:9

PHILIPS ( continued )
TV-HVT 930 TV-HVT 135 TV-HVT 126 TV-HVT 1002 TV-HVT 931 TV-HVT 1063 TV-HVT 129 TV-HVT 125 TV-HVT 932 TV-HVT 129 TV-HVT 138 TV-HVT 120 TV-HVT 927 TV-HVT 1067 TV-HVT 1067 TV-HVT 127HR TV-HVT 929 TV-HVT 127 TV-HVT 117 TV-HVT 117 TV-HVT 1061 TV-HVT 1062 TV-HVT 1065 TV-HVT 1064 TV-HVT 1064 TV-HVT 1096 TV-HVT 1139 TV-HVT 117 TV-HVT 134 TV-HVT 1070 TV-HVT 997 TV-HVT 1154 TV-HVT 1101 TV-HVT 1201 TV-HVT 1071 TV-HVT 1151 TV-HVT 1157 TV-HVT 118 TV-HVT 933 TV-HVT 1067 TV-HVT 1067 TV-HVT 134 TV-HVT 1063 TV-HVT 130
10254 4822-140-4822-140-4822-140-4822-140-10414 4822-140-10424 4822-140-10559 4822-140-10569 4822-1400-10629 4822-140-10637 4806-140-10649 4822-140-4822-140-35353 4822-140-4822-310-31892
HR6096 HR6040 HR6133 HR6205 HR6141 HR6489 HR7505-01 HR6140 HR6214 HR7505-01 HR7564 HR7506-01 HR7500 HR7524 HR7524 HR7527 HR6216 HR2101 HR6478 HR6478 HR6581 HR6483 HR6547 HR6535 HR6535 HR6627 HR6538 HR6478 HR7789 HR7980 HR7815 HR8225 HR8304 HR8707 HR8124 HR8333 HR8380 HR7526 HR6298 HR7524 HR7524 HR7789 HR6489 HR3642
FAT3653 FAT3818 FAT 3832 KN-35041N FAT3829 FAT 3819 FAT 3820 FAT30167 FAT 3819
38.00 39.50 29.95 33.00 36.50 44.50 29.75 36.50 43.25 29.75 29.75 29.75 32.50 29.75 29.75 31.50 44.50 26.50 41.50 41.50 55.00 52.00 48.50 52.00 52.00 49.95 49.95 41.50 29.75 49.50 31.50 49.95 32.50 59.95 32.50 39.50 36.50 31.50 38.50 29.75 29.75 29.75 44.50 22.00
FAT3830 FAT3830 FAT 30057

KN3038201

KN3038201 FAT 3642
KT2260, KT2036, KT2226, KT2236, KT2636, 14CT2416 $ PHILIPS CHASSIS: K40 MATCHLINE 26 $ PHILLIPS: 20CT6360 CTO-S $ 14GR1021 14GR 1220 21GR1051 21GR125. K40 CHASSIS $ PHILLIPS: 36832, 22CE 2061, 36835, 27CE2690 $ $ 36692 CF1 14CF1014 $ 3696, 28CT8890, 28CT8893, 28CT8875, CHASSIS 2B $ 25CG6270 CP110 $ 3669 CF1 14CF1014 $ NC3-CR-S, NCF SV$ $ 21CN4760 $ 21GR9650, 21GR9750, G90B $ 21GR9650, 21GR9750, G90B $ PHILLIPS: 37622, 14GR1224/1234, GR1AX - 14 SETS $ 28DC2070 $ 37622, 20GR1055/1356, GR1AX - 20 SETS $ G110S, G111 G112 25GR6766 $ G100-S, G111-E, G111S, G112 $ 29FL1770/75 ETC $ $ Fl101, 33ML8990/6 $ $ $ 28ML8765-75B $ 33PT910/01 $ G110S, G111, 25GR6766 $ CHASSIS GS3 20GR1850, 20GR8350 $ 29GX1891, 29GX1893, 29GX1896, 29GX1995,ANUBIS-SBB$ ANUBIS DD 21PT128A $ 32PW9534-75R $ 21PT238, 21PT260A/75, 21MMTV-75V $ 29PT862A, CHASSIS MD1.1A $ 21PT2622/75 ETC $ 1372.001C, 29PT5683-79R $ 29PT4273, 29PT4873 ETC 13420020 $ 30730, 30731, 30732 $ $ 21GR9650, 21GR9650, 21GR9750, G90B ETC $ 21GR9650, 21GR9650, 21GR9750, G90B ETC $ CHASSIS GS3 20GR1850, 20GR8350 $ $ PYE: T30 $

PRINCESS

TV-HVT 50 TV-HVT 43 TV-HVT 42
154-125 FCC1415AL FCK1415AL

HR7472 HR7254 HR7603

14 14CT9

$ 36.50 $ 32.75 $ 32.50

PREMIER

TV-HVT 1001

KFS60490

HR7995

PT2801: 68 14CT9

$ 48.00

TV-HVT 1171

10500980, 10500980-P4

HR8317

10566060-P2

29DH91A, THREE CHASSIS?, 33MS91A

$ 38.50

ALL LISTED PRICES INCLUDE GST

GO TV PARTS