CD clock radio

A touch of magic

touch screen control
Wake to your favourite tune CD playback and wake-up track Digital tuning with presets Easy to use LCD touch screen control Big display for easy reading Dual alarm Alarm time display Start the day your way Gentle wake (increasing alarm volume) Sleep timer Repeat alarm
Standard product information Clock/ alarm Quartz-operated clock Wake up to radio or buzzer Dual alarm Gentle wake (increasing alarm volume) Sleep timer (up to 60 minutes) Repeat alarm (9 minutes) Daily alarm reset Time indication 24 hrs Tuner Digital tuning 10 radio station presets Wavebands FM/MW Frequency ranges FM 87.5 - 108 MHz MW 531 - 1602 kHz Sound system Loudspeaker 64 mm (2.25) Max. output power (RMS) (+1 dB; D<10%) 100 mW
CD playback and wake-up track Gives you the choice of waking up to your favourite CD track, radio station or alarm buzzer. Digital tuning with presets By allocating favourite radio stations a preset number, its quick and convenient to return to them without having to remember frequencies. LCD touch screen control Touch screen let's you control CD, radio and time/alarm set features. Big display for easy reading Big LCD ensures good visibility of the displayed information. Dual alarm Two alarms that can be set independently. Alarm time display A continuous display shows both the current time and the time that the alarm is set to go off, giving constant reassurance to the alarm user. Gentle wake (increasing alarm volume) Gentle Wake lets you customise your alarm volume to the level you need to wake up.When the wake-up time arrives, the alarm will switch on and the volume will gradually increase until the sound wakes you up. Sleep timer Sleep timer can be programmed to allow music to play for any period up to 60 minutes. Once the selected time period has expired, the clock switches to stand-by mode. Repeat alarm Automatically resets the alarm for the same time on the next day, so you don't have to keep manually resetting the alarm.
Display LCD touch panel control Multi-functional display with amber backlight Smooth brightness control (fade in, fade out) Connections Headphone socket

3.5 mm

Power supply AC/DC adapter included 230 V, 50 Hz Self-powered back up built in, 3 minutes General Material Weight (kg) Dimensions (mm) Packaging dimensions (mm) Quantity/ Mastercarton
Polystyrene 1.W x 124 H x 195 D 204 W x 174 H x 242 D 6
Printed in Hong Kong 2002-12-15 Specifications subject to modification without notice 2002 Koninklijke Philips Electronics N.V. All rights reserved www.philips.com www.audio.philips.com

aj3980/17

1/9/03

10:08 AM

Page 1

CD Clock Radio

English

CONTROLS (see figure 1)

CONTROLS/ INSTALLATION
- starts / pauses CD playback - stops CD playback / - skips to the next / previous CD tracks - fast search within a track Radio: TUNING / (up / down) - tunes to radio stations automatically/ manually PRESET 1 - 5 - to select / store a radio preset station BAND - selects waveband (FM/AM). $ALARM 1 - selects CD alarm - switches CD alarm on/ off %p - 3.5 mm jack for headphones ^Coil antenna - improves FM reception &Power cord INSTALLATION (see figure 2) AC Power Supply 1. Check if the power voltage, shown on the type plate on the bottom of the set, corresponds to your power supply. If it does not, consult your dealer or service center. 2. Connect the plug to the wall outlet.PH.IL.IPS scrolls across the display continuously. To exit the demo mode, press any button on the set. Eg. TIME / ALARM CD / RADIO OFF SLEEP TIMER RADIO CD 3. To disconnect the set completely from the power supply, withdraw the plug from the wall outlet. Standby power consumption (clock mode).1.5W
SETTING THE CLOCK AND ALARM TIMES
MEMORY BACKUP The memory backup conveniently allows your clock, alarm and radio presets to be stored for up to 3 minutes when there is a power interruption e.g. AC power failure. The complete CD clock radio and display will be switched off. As soon as the power supply returns, the display will indicate the correct time. If power supply returns after 3 minutes, you will need to re-enter the clock and alarm time settings. CONNECTING HEADPHONES Connect headphones with a 3.5 mm plug into the p jack. =The built-in speaker will now be muted on the set. DISPLAY BRIGHTNESS In the dim / medium setting, the backlight is interactive and gently fades in and out whenever you press a touch screen control. There are 3 settings: bright medium dim Press REPEAT ALARM/ BRIGHTNESS CONTROL once or more. SETTING THE CLOCK TIME (see figure 3) The time is displayed using the 12 hour clock where the PM indicator lights up (on = PM, off = AM). 1. In the standby mode, press TIME SET to activate the clock setting mode. =The current clock time in the main display flashes. This can be useful when for example you need to be woken up at a different time during the week and at the weekend. SETTING THE ALARM TIME 1. In the standby mode, press ALARM 1 / ALARM 2 to select the alarm mode. Check the respective icon appears in the display: CD radio / buzzer. Either press briefly: ALARM 1 once for CD alarm. This enables CD playback from the first track as your alarm call. / buzzer ALARM 2 once or more for radio alarm. 2. Press SET AL 1 or SET AL 2 to activate the alarm setting mode. =The current alarm time display flashes.
Return your Warranty Registration card today to ensure you receive all the benefits youre entitled to.
Once your Philips purchase is registered, So complete and return the Warranty youre eligible to receive all the privileges Registration Card enclosed with your of owning a Philips product. purchase at once, and take advantage of these important benefits.

^ &

1SLEEP TIMER - adjusts timer options for CD / radio - switches CD / radio on. 2CD - starts CD playback 3RADIO - switches on radio 4TIME / ALARM

CD / RADIO OFF

This product complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.

Read this manual rst!

If you have any problems, do not attempt to return this product to the store.

RTAN PO

For fast help, call us rst! 1-800-531-0039
Return your Warranty Registration Card within 10 days
- switches off CD / radio - selects clock display 5WAKE-UP TRACK - programs your favorite CD track for wake-up track alarm. 6PUSH TO OPEN - push this corner to open CD door 7DAILY ALARM RESET - stops the active alarm for 24 hours 8+ / - VOLUME - adjusts the volume 9REPEAT ALARM/ BRIGHTNESS CONTROL - switches off the alarm for a 9 minute period - switches off timer function - changes the brightness of the display window

Warranty Verification

Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your Philips warranty.

Owner Confirmation

Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.

Model Registration

Returning your Warranty Registration Card right away guarantees youll receive all the information and special offers which you qualify for as the owner of your model.

L'appareil rpond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement soumis aux deux conditions suivantes: 1. Cet appareil ne doit pas provoquer d'interfrences nuisibles, et 2. Cet appareil doit accepter toute interfrence reue, y compris les interfrences susceptibles de provoquer un fonctionement peu satisfaisant.
3. Press HOUR/ MINUTE to adjust the hours and minutes respectively.
With your finger held down on HOUR/ MINUTE, the display will increase the hours / minutes rapidly and continuously. Press HOUR/ MINUTE briefly and repeatedly to adjust the time slowly. 4. Press SET AL 1 or SET AL 2 again when you have reached the correct time. =You will hear a double beep to confirm the time setting.

Know these

safety symbols

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
For Customer Use Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Model No. ________________________ Serial No. ________________________
El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento dependiente de dos condiciones siguientes: 1. Este aparato no puede provocar interferencia daina, y 2. Este aparato debe aceptar cualquier interferenciarecibida, incluyendo las interferencias que puedenprovocar un funcionamiento insuficiente.
0Main display - shows clock time and function status - shows radio frequency and CD track number briefly when respective function is in use !Alarm time display - shows the alarm time and the chosen alarm activated: - CD (AL 1 TIME), radio / buzzer (AL 2 TIME) @ALARM 2 - selects radio / buzzer alarm - switches radio / buzzer alarm on/ off #Touch Screen Controls Clock controls shown in standby mode. The radio / CD controls appear when the radio / CD is switched on. SET AL 1 - sets CD alarm time HOUR - adjusts hour setting TIME SET - sets clock time MINUTE - adjusts minute setting SET AL 2 - sets radio / buzzer alarm
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Canada English: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Franais : Cet appareil numrique n'met pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de Classe B prescrites dans le Rglement sur le Brouillage Radiolectrique dict par le Ministre des Communications du Canada.
VOLUME CD RADIO TIME / ALARM

SLEEP TIMER

WAKE-UP TRACK
The serial and production number are located on the bottom of the set.
2. Press HOUR / MINUTE to adjust the hours and minutes respectively. With your finger held down on HOUR / MINUTE, the display will increase the hours / minutes rapidly and continuously. Press HOUR / MINUTE briefly and repeatedly to adjust the time slowly. 3. Press TIME SET again when you have reached the correct time. =You will hear a double beep to confirm the time setting.

SETTING THE ALARM (see figure 3) GENERAL Two different alarm times, ALARM 1 and ALARM 2 can be set in the CD / radio / buzzer modes.

Alarm time display

If you have set both alarms, the standby alarm time display will show the alarm time which is ready to go off first, according to the current clock time. E.g. if current clock time = 7:30 AL2 TIME = 6:20 AL 1 TIME = 7:45, the standby alarm display shows the alarm time, 7:45. GENTLE WAKE VOLUME A sure way of getting up in the mornings, the gentle wake volume for the alarm begins from a fixed gentle volume (10) and gradually increases to a maximum higher setting of ( 25.) The default low volume is uo : 10, and the maximum volume is uo : 25. During the alarm call, if you press + / - VOLUME, the volume stops automatically getting louder.
This bolt of lightning indiWARNING: TO PREVENT FIRE cates uninsulated material OR SHOCK HAZARD, DO NOT within your unit may cause an elecEXPOSE THIS EQUIPMENT TO trical shock. For the safety of every- RAIN OR MOISTURE. one in your household, please do not remove product covering. CAUTION: To prevent electric The exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. shock, match wide blade of plug to wide slot, and fully insert.

MAC5097

REPEAT ALARM

BRIGHTNESS CONTROL

DAILY ALARM RESET

AJ3980 CD Clock radio

PHILIPS CONSUMER ELECTRONICS NORTH AMERICA
Knoxville, Tennessee 37914-1810, U.S.A.

Helpful Tip :

If you want the alarm to wake you up, FIRST CHECK: - you have disconnected the headphones. radio alarm : make sure you have tuned properly to a station.
DAILY ALARM RESET If you want the alarm mode to be stopped immediately but also wish to retain the same alarm setting for the following day: Press and hold DAILY ALARM RESET =You will hear a beep tone to confirm that the alarm reset has been activated. REPEAT ALARM This will repeat your alarm call at 9 minute intervals. During the alarm call, press REPEAT ALARM/ BRIGHTNESS CONTROL. Repeat as often as desired. , , = Your alarm mode indication will flash throughout the time the repeat alarm is active. CANCELLING THE ALARM COMPLETELY When an alarm is cancelled this is shown by the selected alarm indication and symbol disappearing from the display. To cancel the set alarm time before it goes off: Press ALARM 1 or ALARM 2 until the alarm icons / / disappears from the display.
CD PLAYBACK (see figure 5) 1. Insert a CD with the printed side facing up, and close the door. 2. Press the CD button to start playback. =Display shows: 'Cd: --' and the total number of tracks, then your current track number, before returning to clock time =CD touch screen controls appears throughout CD operation. Other possible CD indications before returning to clock time: =door is shown if the CD door is not closed. =noCd is shown if no CD has been inserted / inserted incorrectly. =nFCd is shown if the CD-R(W) is non-finalized =Err indicates a general error in operation of the set. 3. Adjust the sound with +/- VOLUME. 4 To interrupt, press = CD flashes.

CD / RADIO

In the CD stop position, the CD touch screen display remains active for 5 minutes.
Press to start playback again if you have stopped briefly e.g. to change a CD.
TUNING TO A STATION (see figure 6)
IMPORTANT SAFETY INSTRUCTIONS
1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the AC safety purpose of Polarized Plug the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Battery usage CAUTION To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: Install all batteries correctly, + and - as marked on the unit. Do not mix batteries (old and new or carbon and alkaline, etc.). Remove batteries when the unit is not used for a long time. EL 6475-E004: 02/8

English Franais

ALARM 1
SELECTING CD WAKE-UP ALARM MODE
You can program and select a CD track number between 1-99, when the set is in the standby or radio playback mode. However, if the track number programmed does not exist on your CD, the CD will start playback from the first track during the alarm call. 1. Set the alarm time for AL1 TIME. 2. Insert a CD into the CD compartment. 3. Press ALARM 1 to select CD alarm mode. 4. Press WAKE-UP TRACK to activate favorite track programming. 5. Press or until the desired track number is shown. 6. Press WAKE-UP TRACK to confirm the selected track number. = The display returns to standby clock time. 7. If you want to review your programmed track number, press WAKE-UP TRACK.

If CD playback is paused for more than 15 minutes and no controls are pressed, the set automatically goes to standby mode. SELECTING A DIFFERENT TRACK DURING PLAYBACK The track number appears briefly in the display when to skip tracks. you press or
Press Press once or more to skip to the next track(s). more than once to skip to previous tracks

Espaol

Manual tuning: 1. Press / briefly to find your station. Repeat until you have found the desired station. Automatic tuning: Press and hold / until the display frequency starts to change frequency. When a station of sufficient strength has been found, tuning will stop. Or you can stop the automatic tuning search by pressing either / again. Repeat until you have found the desired station.
PRESET STATIONS (see figure 6) Storing preset stations You can program up to five radio stations for each band. If you like, you can also replace a preset station with another frequency. The current station will be indicated by a square round the preset number in the display. E.g. 1 1. Tune to your desired station (see RADIO RECEPTION). 2. As soon as you have found your station, press and hold a preset number 1-5. Release the number when you hear a double beep confirming that the station has now been set. Selecting preset stations Select and press a preset number, 1-5. SLEEP TIMER (see figure 7) About SLEEP TIMER This feature is a built-in timer device which enables the set to be automatically switched off during CD / radio playback, after a set period of time. There are three timer options: 60 , 30 and 15 minutes. Setting SLEEP TIMER 1. Press the SLEEP TIMER button rapidly once or more to select your timer options: 60 , 30 and 15 minutes. =The display will show SL: and the timer options briefly. = appears when the timer is active. 2. To cancel the timer, you can either press: TIME/ALARM CD / RADIO OFF REPEAT ALARM/ BRIGHTNESS CONTROL

ALARM 2

AL 1 TIME

PRESET

AJ3980

SET AL 1

TIME SET MINUTE SET AL 2
Press once and playback will return to the beginning of the current track. FINDING A PASSAGE WITHIN A TRACK 1. During playback, press and hold or =The CD is played at high speed and low volume; the display will show 'Cd:' and your current track number. 2. Release or when you recognize the passage you want. =Normal CD playback and standby clock time resumes. RADIO RECEPTION (see figure 6) 1. Press the RADIO button to switch on the radio. =Radio touch screen controls appears throughout radio operation =The radio frequency and waveband appears in the display for 10 seconds before reverting back to the clock display. 2. Press the BAND button to select your waveband FM/AM. 3. Tune to your station manually or automatically by using (up / down). / To improve reception : FM : extend the coil antenna fully at the back of the set for optimum reception. AM : uses a built-in antenna. Direct the antenna by adjusting the position of your set. 4. Adjust the sound using the + / - VOLUME. 5. To switch off the radio, press the TIME/ALARM CD / RADIO OFF button.

CLASS 1 LASER PRODUCT

IMPORTANT! The buzzer alarm option will automatically replace the CD alarm if you have: inserted a CD incorrectly; inserted a damaged CD; forgotten to insert any CD; not closed the CD door properly.
SWITCHING OFF THE ALARM (see figure 4) There are three ways of switching off the alarm. Unless you cancel the alarm completely, the DAILY ALARM RESET option will be automatically selected after 59 minutes, from the time your alarm time first sounds.
Meet Philips at the Internet http://www.philips.com

Helpful Tip

During an alarm call/ repeat alarm, only the DAILY ALARM RESET, REPEAT ALARM/ BRIGHTNESS CONTROL and ALARM 1 or ALARM 2 and + / - VOLUME controls on the set will operate.

5. Press 6. Press

again to resume playback.

Printed in China

to stop playback. Or press TIME / ALARM CD / RADIO OFF to return to standby mode.

MAINTENANCE

TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center.
Continuous crackling/ hiss disturbance during AM broadcast Electrical interference from TVs, computers, fluorescent lamps, etc. Move set away from other electrical equipment The alarm does not function

LIMITED WARRANTY

PORTABLE AUDIO
One Year Free Exchange This product must be carried in for an exchange.
General (see figure 8) If you do not intend to use the set for a long time, withdraw the plug from the wall outlet. Do not expose the set, to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. To clean the set, use a soft, dry cloth. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the products surface. CD player and CD handling (see figure 9) The lens of the CD player should never be touched! Sudden changes in the surrounding temperature can cause condensation to form and the lens of your CD player to cloud over. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. Always shut the CD door to keep the CD compartment dust-free. To clean, dust the compartment with a soft dry cloth. To clean the CD, wipe in a straight line from the center towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. Never write on a CD or attach any stickers to it.

WARNING:

Do not open the set as there is a risk of electric shock! Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty.

No sound

Alarm mode not selected See chapter on SETTING THE ALARM Alarm time not set See chapter on SETTING THE ALARM.
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
WHO IS COVERED? You must have proof of purchase to exchange the product. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Attach it to this owners manual and keep both nearby. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For one year thereafter, a defective or inoperative product will be replaced with a new, renewed or comparable product at no charge to you. A replacement product is covered only for the original warranty period.When the warranty on the original product expires, the warranty on the replacement product also expires. WHAT IS EXCLUDED? Your warranty does not cover: labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips. reception problems caused by signal conditions or cable or antenna systems outside the unit. a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.) a product used for commercial or institutional purposes. WHERE IS EXCHANGE AVAILABLE? You may exchange the product in all countries where the product is officially distributed by Philips. In countries where Philips does not distribute the product, the local Philips service organization will attempt to provide a replacement product (although there may be a delay if the appropriate product is not readily available).

BEFORE REQUESTING EXCHANGE. Please check your owner's manual for assistance. If you have additional questions, call us at 1-800-531-0039. EXCHANGING A PRODUCT IN U.S.A., PUERTO RICO, OR U.S.VIRGIN ISLANDS. Contact 1-800-531-0039 to arrange an exchange. Or, ship the product, insured and freight prepaid, and with proof of purchase enclosed, to the address listed below. Philips Exchange Program Suite A 406 North Irish Street Greeneville TN 37745 (In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.) EXCHANGING A PRODUCT IN CANADA. Please contact Philips at: 1-800-661-6162 (French Speaking) 1-800-531-0039 (English or Spanish Speaking) (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.) REMEMBER. Please record below the model and serial numbers found on the product. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary. MODEL # SERIAL # __________________________________ __________________________________

AL 2 TIME

AL 1 TIME AL 2 TIME
Volume not adjusted Adjust the VOLUME Headphones are connected Disconnect headphones
Environmental information
All unnecessary packaging material has been omitted. We have done our utmost to make the packaging easily separable into 2 materials: paper pulp, polyethylene. Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe local regulations on the disposal of packing materials and old equipment.

TUNING

No reaction to any operation of the bottons Electrostatic discharge Disconnect the set from the power supply and reconnect the set after 5 minutes. CD playback does not work
CD badly scratched or dirty Replace/ clean CD Laser lens steamed up Wait until lens has adjusted to room temperature Laser lens dirty Clean lens by playing a CD lens cleaning disc CD-R(W) is non-finalized Use a finalized CD-R(W)
Occasional crackling sound during FM broadcast

RADIO FM

Weak signal Extend coil antenna fully
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province. Philips, P.O. Box 520890, Miami, FL 33152, USA, (402) 536-4171

EL6095T004 / 8-02