530_535__. 1 , 1, 2006 3:52

Welcome

Quick start guide

Connect Install Enjoy

530_535__. 2 , 1, 2006 3:52

Whats in the box

Handset

Base station

Power supply for base station

Line cord

2 AAA rechargeable batteries

Battery door

User Guide

Quick Start Guide

Warranty card
The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.
WARNING Always use the cables and batteries that came with your phone.
530_535__. 3 , 1, 2006 3:52

Connect

Connect the base station
1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station.
Connect the power supply A
Connect the line cord to the line socket B
3. Connect the other end of the line cord to the telephone line socket and the other end of the power cable to the electricity socket.

Install

Insert batteries and charge
Charge handset for 24 hours

Insert batteries

Set date and time

1. 2. 3. 4.

Press mMENU. Scroll : to Clock & Alarm and press mSELECT. Press mSELECT to enter Set Date/Time. Enter current time (HH:MM) and current date (DD/MM/YY) and press mSELECT.
Now, you are ready to use your phone.
530_535__. 4 , 1, 2006 3:52
Enter the phone number and press r. OR Press r and enter the phone number.

Make a call

Answer a call End a call
When the phone rings, press r key. Press e key.
Adjust earpiece volume during a call
Press : to select from Volume 1 to Volume 5.
1. Press mMENU, scroll : to Personal Set and press mSELECT, press Handset Tones, scroll : to Ring Melody and press mSELECT. 2. Scroll : to your desired melody to play the melody. 3. Press mSELECT to set the ring melody. A confirmation beep is emitted and the screen returns to previous menu.

Set the ring melody

mSELECT to enter
1. Press mMENU, scroll : to Phonebook and press mSELECT, press mSELECT to enter New Entry. 2. Enter the name of the contact (maximum 12 characters) and press mOK. 3. Enter the number (maximum 24 digits) and press mOK. 4. Enter the SMS Box number and press mOK (only for UK). (The default SMS Box is 9. To modify, press >CLEAR and then enter the number (0 to 9).) 5. Scroll : to choose a group (<No Group>, <Group A>, <Group B>, <Group C>) and press mSELECT to confirm. A long confirmation beep tone is emitted. 1. Press d in stand-by mode or press mMENU, scroll scroll : to List Entry and press mSELECT. 2. Press : to browse the phonebook.
Store a contact in the phonebook

Access the phonebook

: to Phonebook and press mSELECT,
530_535__. 5 , 1, 2006 3:52
Switch the handset On/Off
Press and hold e key for 5 seconds to switch off the handset in stand-by mode. Short press e key to switch on the handset again.
Keypad lock/unlock Paging
Press and hold * key for 2 seconds to lock and unlock keypad in stand-by mode. 1. Press c key on the base until the handset starts to ring. 2. Once the handset is retrieved, press e to end the paging. Press To Enter the main menu from stand-by mode. Select the function displayed on the handset screen directly above it. Activate mute function during a call. Go to redial list from stand-by mode. Select the function displayed on the handset screen directly above it. Answer an incoming external or internal call. Insert R for operator services when on the line. Hang up a call. Long press from menu browing to return to stand-by mode, short press to return to previous menu. Long press in stand-by mode to switch off the handset, short press to switch on the handset again. Access call log from stand-by mode. Scroll up a menu list or go to the previous phonebook or call log record. Increase earpiece volume during a call. Go to the previous character in editing mode. Access phonebook from stand-by mode. Scroll down a menu list or go to the next phonebook or call log record. Decrease earpiece volume during a call. Go to the next character in editing mode. Initiate an internal call. Answer an incoming call in handsfree mode. Activate and deactivate the loudspeaker during a call. Dial # in stand-by mode. Long press to mute the ringer in stand-by mode. Insert a pause in dialling mode. Switch between upper and lower case in editing mode. Dial * in stand-by mode. Long press to activate and deactivate keypad lock.

m > r e u d c v # *

530_535__. 6 , 1, 2006 3:52

Troubleshooting

For more information, please refer to p.50 of CD530 user manual and p.58 of CD535 user manual. Problem

No dialling tone

Solution
Check the connections Charge the batteries for at least 24 hours Use the line cable provided

Poor audio quality

Move closer to the base station Move the base station at least one metre away from
any electrical appliances

icon is blinking

Register the handset to the base station Move closer to the base station Check your subscription with your network operator
Caller Line Identification
(CLI) service does not work

Need help?

User Manual
Refer to the User Manual that is supplied with your CD530/535.

Online help

www.p4c.philips.com

Basic operations of your CD530

Make a call

Enter the phone number (maximum 24 digits) and press r to dial the number. For details, please refer to "Make a call" on page 17.

Answer or end a call

Press r key to answer a call. Presse key to end a call. For details, please refer to "Answer a call" and "End a call" on page 18.
Switch the handset on/off

Press and hold

e key for 5 seconds to switch off the handset in stand-by mode.
Short press e key to switch on the handset again.j

Keypad lock/unlock

Press and hold * key for 2 seconds to lock and unlock the keypad in stand-by mode.

Paging

The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries. Press p key on the base until the handset starts to ring. Once retrieved, press e to end the paging.

Install Stand-by mode

If the handset is idle for 30 seconds in settings mode, review mode, edit mode, etc. it will automatically return to stand-by mode. It will also return to stand-by mode automatically when the handset is placed back on the base station.
Screen and keypad backlight
The backlight remains on for 20 seconds after each activation such as an incoming call, key presses, lifting up the handset off the base station, etc. The color of the keypad backlight is AMBER.
If you have subscribed to Caller Line identification, the event LED on your handset blinks when there is a new event such as a new call, a new SMS or a new voice mail message.

Text and number entry

Key Assignment space 1 @ _ # = < > ( ) & $ [ ] { } abc2 def3 ghi4 jkl5 mno6 pqrs7 tuv8 wxyz9. 0 , / : ; ! i ? * + - % \ ^ ~|

1. 2. 3. 4. 5. 6.

For example, to enter the name Philips: Press 7 once: P Press 4 twice: Ph Press 4 three times: Phi Press 5 three times: Phil Press 4 three times: Phili Press 7 once: Philip
7. Press 7 four times: Philips

Install

By default, the first letter of a word is in upper case. Press # to switch between upper and lower case.

Default settings

Ringer Volume Earpiece Volume Speaker Volume Key Beep Wallpaper Medium Volume 3 Volume 3 On
Contrast Screensaver Auto Pick-up Auto Hang-up Babysit mode Alarm clock Barring mode SMS reception Master PIN
Level 2 On Off On Off Off Off On 0000

Call Make a call

Predialling
1. 2. Enter the phone number (maximum 24 digits). Press r to dial the number. Press r or v to take the line. Enter the phone number.

Direct dialling

Call from redial list
1. 2. 3. Press > in stand-by mode. Scroll : to an entry in the redial list. Press r to dial the number. TIP The handset stores the last 20 numbers dialled. The last number dialled will appear first in the redial list. If the redial number matches a phonebook entry, the name will be displayed instead.

Call from the call log

1. 2. 3. 4. Press u in stand-by mode. Press mSELECT to enter call log. Scroll : to an entry in the call log. Press r to dial the number. You need to subscribe to Caller Line Identification service to be able to see the callers number or name in the call log. See "Call log" on page 24 for details.

Call from the phonebook

1. 2. 3. Press d in stand-by mode. Scroll : to a phonebook entry. Press r to dial the number. TIP Instead of scrolling : to browse the phonebook entries, press the numeric key corresponding to the first letter of the entry you wish to locate. For example, pressing 2 will show the entries starting with A. Pressing 2 again will show the entries starting with B, etc.

Call Answer a call

When the phone rings, press r key.

Handsfree answering

When the phone rings, press v key. Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted. TIP If Auto Pick-up mode (see page 37) is activated, you can simply lift up the handset from its base station to answer the call. This feature is deactivated by default. WARNING When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.

End a call

e key.
The call duration will be displayed on the handset screen for about 5 seconds. TIP If Auto Hang-up mode (see page 37) is activated, you can simply place the handset back to its base station to end the call. This feature is activated by default.

Calls in-progress

The following options are available during a call:

Adjust earpiece volume

1. Press : to select from Volume 1 to Volume 5. During a call, press mMUTE to turn off the microphone so that your correspondent cannot hear you. Press mUNMUTE to turn on the microphone. Press v key to activate loudspeaker mode.

Mute/unmute the handset

Loudspeaker mode
2. Press v key again to return to normal mode. WARNING Activation of loudspeaker can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear.
Adjust loudspeaker volume
1. Press : key to select from Volume 1 to Volume 5.

Intercom

This feature is only available when there are at least 2 registered handsets. It allows you to make free internal calls, transfer external calls from one handset to another and use the conference option.

Intercom another handset

To be able to use intercommunication feature, you must have at least 2 handsets registered to your base station (see page 42 "To register an additional handset"). 1. 2. Press c key in stand-by mode. Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Press mALL to call all the handsets or press the handset number to select a specific handset, e.g. press 2 to call handset 2. If the handset does not belong to CD530/535 range, this function may not be available.
Transfer an external call to another handset
1. 2. Press c key to put the external call on hold (the caller can no longer hear you). Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Press mALL to call all the handsets or press the handset number to select a specific handset, e.g. press 2 to call handset 2. The called handset rings. If there is no answer from the called handset, press c key to resume the external call. 3. 4. Press r key on the called handset to answer the internal call, where both internal callers can talk. Press e key on the first handset to transfer the external call to the called handset. Press c key once to switch between an internal call and external call.
Switch between an internal and external call
Call Three-party conference call
The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. 1. 2. Press c to put the external call on hold (the caller can no longer hear you). Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 registered handsets, the handset numbers which are available for establishing a conference call will be displayed. Press mALL to call all the handsets or press the handset number to select a specific handset, e.g. press 2 to call handset 2. The called handset rings. Press r key on the called handset to answer the internal call, where both internal callers can talk. Press CONF soft key on the first handset to start the three-party conference. TIP If Conference mode is activated (see page 45), a three-party conference call is automatically established if the second handset takes the line when there is already an external call in progress.

Edit a phonebook entry

mMENU, scroll : to Phonebook and press mSELECT, scroll : to Edit Entry and press mSELECT. Scroll : to the entry you wish to edit and press mSELECT. Press >CLEAR to erase the letters one by one, edit the name and press mOK. Press >CLEAR to erase the digits one by one, edit the number and press mOK. Enter the SMS Box number and press mOK (only for UK). Scroll : to a group (<No Group>, <Group A>, <Group B>, <Group C>) and press mOK to
Press confirm. A long confirmation beep tone is emitted.

Delete a phonebook entry

1. 2. Press mMENU, scroll : to Phonebook and press mSELECT.
mSELECT, scroll : to Delete Entry and press
Scroll to the entry you wish to delete and press mSELECT. A long confirmation beep tone is emitted.
Delete all phonebook entries
mMENU, scroll : to Phonebook and press mSELECT, scroll : to Delete All and press mSELECT. 2. Press mSELECT again to confirm.
1. Press A long confirmation beep tone is emitted.
Phonebook Store direct access memory
You can store up to 9 direct access memories (Key 1 to 9). A long press on the keys in stand-by mode will automatically dial the stored phone number. 1. 2. 3. 4. 5. Press mMENU, scroll press mSELECT.
: to Phonebook and press mSELECT, scroll : to Direct Memory and mVIEW. If there is a stored number in that key, the number/
Select a key (Key 1 to Key 9) and press name will be displayed.
If there is no number stored for the selected key or if you want to change the number currently stored, press mSELECT and press mSELECT again to select Add. Press mOK to display the phonebook list and scroll : to the entry you wish to store as direct access memory. Press mOK to confirm. A long confirmation beep tone is emitted.
Delete a direct access memory
1. 2. 3. 4. Press mMENU, scroll press mSELECT.
: to Phonebook and press mSELECT, scroll : to Direct Memory and
Select a key (Key 1 to Key 9) and press mVIEW. Press mMENU and scroll : to Delete. Press mOK to confirm. A long confirmation beep tone is emitted.

Transfer phonebook

This feature allows you to transfer the phonebook from one handset to another handset when there are at least 2 handsets registered to your base station. 1. 2. 3. 4. 5. 6. Press mMENU, scroll : to Phonebook and press mSELECT, scroll : to Phbk transfer and press mSELECT. The handset numbers which are available for transfer will be displayed. If there are more than 2 handsets, you can scroll : to select a specific handset. Press mSELECT to confirm. The called handset will be prompted with a message Transfer from Handset X. To accept the transfer of phonebook, press press > CANCEL.

Write a SMS Inbox Draft box SMS Settings SMS stands for Short Message Service. To benefit from this service, you must subscribe to Caller Line Identification Service (CLI) together with SMS service from your network provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), provided the receiver has also subscribed to CLI and SMS services. The factory settings on your CD530 correspond to the main national operator. If you wish to send or receive SMS messages through another service provider, you must set the corresponding numbers (see page 31). You can create up to 10 SMS boxes (Box 0 to Box 9) and protect each box with a password (only for UK). Your CD530 can store up to 50 SMS messages (40 SMS in the Inbox and 10 SMS in the Draft box) shared by all the SMS boxes and the maximum length of each message is 160 characters. In order to send and receive SMS messages, there must be at least one SMS Box. Box 9 with empty password is created by default (only for UK). For more information, please refer to "SMS Box (only for UK)" on page 30.

Write and send new SMS

1. 2. 3. Press mMENU, press mSELECT to enter SMS, press mSELECT again to enter Write a SMS. Scroll : to the desired SMS Box (Box 0 to Box 9) and press mSELECT to enter password (only for UK). Enter the password (if needed) and press mOK. Key Operation Press to move cursor left by 1 position. Press and hold to jump to the 1st character/digit. Press to move cursor right by 1 position. Press and hold to jump to the last character/digit. Press to erase the previous character/digit. Press to return to the previous menu if there are no characters/digits on the input screen. Long press to delete all characters/digits. 4. Enter the text and press mOK. You can enter up to 160 characters for an SMS. If you receive a call while writing an SMS, the operation will be interrupted. However, your SMS will be saved in the Draft box. To retrieve it, go to Draft box in your SMS menu (see page 29).

u d >CLEAR

5. 6. Enter the destination phone number and press mOK. Or press mPHBK to browse the phonebook list to select a phone number, press mSELECT and press mOK. Enter the destination box number (0 to 9) directly and press mOK (only for UK). By default, the destination box is 9 (the default destination box depends on the country). 7. 8. Press mSELECT to Send the message or scroll box and press mSELECT to confirm.

Forward an Inbox message

1. 2. 3. 4. While viewing the message content, press mMENU to display the Inbox menu options. Scroll : to Edit and press mSELECT to start editing it if you wish. After editing, press mOK to confirm message. Refer to steps 5 to 7 in "Write and send new SMS" on page 26 to forward the message or select Save To Draft to save the message in the Draft box.
Save senders phone number to phonebook
1. 2. 3. 4. 5. 6. While viewing the message content, press mMENU to display the Inbox menu options. Scroll : to Copy to Phbk and press mSELECT to enter a name for this new contact. Enter the name and press mOK to modify number. To confirm the number, press mOK again. Enter the SMS Box number and press mOK (only for UK). Scroll : to select a group you wish to assign for this contact and press mSELECT to confirm. A long confirmation beep is emitted and the screen returns to display the message content.

Delete an Inbox message

1. 2. While viewing the message content, press mMENU to display the Inbox menu options. Scroll : to Delete and press mSELECT to confirm deletion.
Delete all Inbox messages
1. 2. 3. While viewing the message content, press mMENU to display the Inbox menu options. Scroll : to Delete All and press mSELECT. Press mSELECT again to confirm deletion.

Draft box

In addition to SMS messages saved as drafts, all the SMS messages that are not successfully sent will be automatically stored in the Draft box. The Draft box can store up to 10 messages.

Review Draft messages

1. 2. 3. 4. 5. 6. Press mMENU, press mSELECT to enter SMS, scroll : to Draft box and press mSELECT. Scroll : to your desired box number and press mSELECT (only for UK). Enter the password and press mOK (Password is not required for Box 9). Browse the list of SMS messages and select the message you wish to review. Press mVIEW to view the message content. When viewing the message content, you can press mMENU to access the following options: Send Edit Delete Delete All Send the message immediately. Edit the message and send or save as draft. Delete the message. Delete all messages in the Draft box.
Send a message from Draft box
1. 2. 3. 4. While viewing the message content, press mMENU to display the Draft box menu options. Press mSELECT to Send the message. Press mSELECT again to confirm or scroll and press mSELECT.

Personal Settings

Personal Set
Handset Tones Wallpaper Contrast Screensaver Handset Name Auto Pick-up Auto Hang-up Language Babysit Mode

Handset Tones

Ring Volume
There are 5 ringer volume options (Silence, Low, Medium, High and Progressive). The default level is Medium.
To set ring volume 1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter Handset Tones and press mSELECT again to enter Ring Volume. 2. Scroll : to your desired volume level and press mSELECT to confirm.
A confirmation beep is emitted and the screen returns to previous menu. When Silence is activated, the icon is displayed on the screen.
WARNING When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.

Ring Melody

There are 10 ring melodies available on your handset.
To set Ring Melody 1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter Handset Tones, scroll : to Ring Melody and press mSELECT. 2. Scroll : to your desired melody to play the melody.
3. Press mSELECT to set the ring melody. A confirmation beep is emitted and the screen returns to previous menu.

Group Melody

To benefit from this feature, you must subscribe to the Caller Line ldentification service. See "Caller Line Identification" on page 20. This menu enables you to select and set the melodies to be played when there is an external incoming call from a contact whose name is stored in your phonebook and is part of a group. You can associate 1 ring melody to each group. There are three phonebook groups (Group A, B, C) available for you to organize your contacts. Each group can be assigned a unique melody.
To set Group Melody 1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter Handset Tones, scroll : to Group Melody and press mSELECT. 2. Scroll : to the group for which you wish to set melody and press mSELECT. 3. Scroll : to the desired melody to play the melody. 4. Press mSELECT to set the group melody.
A confirmation beep is emitted and the screen returns to previous menu.

Key Beep

A single beep is emitted when a key is pressed. You can enable or disable this key beep. By default, the key beep is On.
To set key beep On/Off 1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter Handset Tones, scroll : to Key Beep and press mSELECT. 2. Scroll : to On or Off and press mSELECT to confirm.

SMS Tone

A tone is emitted when a new SMS is received. You can enable or disable this SMS Tone. By default, SMS tone is On.
To set SMS tone On/Off 1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter Handset Tones, scroll : to SMS Tone and press mSELECT. 2. Scroll : to On or Off and press mSELECT to confirm.
Personal Settings Wallpaper
This feature allows you to select the wallpaper to be displayed in stand-by mode. There are 4 wallpapers pre-installed on your phone. Please see "Default settings" on page 16 for the default wallpaper.

To set wallpaper

mMENU, scroll : to Personal Set and press mSELECT, scroll : to Wallpaper and press mSELECT. 2. Scroll : to your desired wallpaper and press mSELECT to confirm.
1. Press A confirmation beep is emitted and the screen returns to previous menu.

Contrast level

There are 3 contrast level options (Level 1, Level 2 or Level 3). The default contrast level is Level 2.

To set contrast level

mMENU, scroll : to Personal Set and press mSELECT, scroll : to Contrast and press mSELECT. 2. Scroll : to your desired contrast level (Level 1, Level 2 or Level 3) and press mSELECT to confirm.

Screensaver

Screensaver will be activated automatically after 1 minute in stand-by mode.

To set screensaver

1. 2. Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Screensaver and press mSELECT. Scroll : to On or Off and press mOK to confirm. A confirmation beep is emitted and the screen returns to previous menu.

Handset Name

You can name the handset and display the handset name in stand-by mode. The default handset name of your handset is PHILIPS.

To rename the handset

1. Press mMENU, scroll press mSELECT.
: to Personal Set and press mSELECT, scroll : to Handset Name and
2. Edit the handset name and press mOK to confirm. A confirmation beep is emitted and the screen returns to previous menu. Maximum length of the handset name is 12 characters and the default handset name is PHILIPS.

Auto Pick-up

This function enables you to answer a call automatically by simply lifting the handset from the base station. By default, the Auto Pick-up feature is Off.

To set Auto Pick-up mode

1. 2. Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Auto Pick-up and press mSELECT. Scroll : to On or Off and press mSELECT to confirm. A confirmation beep is emitted and the screen returns to previous menu.

Auto Hang-up

This function enables you to end a call automatically by simply replacing the handset on the base station. By default, the Auto Hang-up feature is On.

To set Auto Hang-up mode

1. 2. Press mMENU, scroll press mSELECT.
: to Personal Set and press mSELECT, scroll : to Auto Hang-up and
Scroll : to On or Off and press mSELECT to confirm. A confirmation beep is emitted and the screen returns to previous menu.

Language

Your CD530 can support different display languages.

To change the language

mMENU, scroll : to Personal Set and press mSELECT, scroll : to Language and press mSELECT. 2. Scroll : to your desired language and press mSELECT to confirm.
Personal Settings Babysit mode
You must have at least 2 handsets registered to your base station to be able to use this feature (see page 42 "To register an additional handset"). This feature allows you to monitor, e.g. the babys room. Place the handset in the room to be monitored. If the sound level around the microphone of the handset exceeds a certain threshold, the handset can automatically call another handset registered on the same base station. To use the Babysit feature you need to activate it (e.g. on handset 1) and enter the number of the handset to be called (e.g. handset 2) in the event that there are noises in the monitored room. Place the handset which is in Babysit mode (e.g. handset 1) in the room to be monitored. If this handset detects a sound level greater than a certain threshold, it will automatically initiate an internal call to the selected handset (e.g. handset 2).

To activate Babysit mode

1. 2. Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Babysit mode and press mSELECT. Enter the number of the handset you wish to call to and press mOK to activate. In Babysit mode, all keys are deactivated except for m key. Babysit mode is displayed on the screen when this function is activated and the handset cannot make or receive calls.
To deactivate Babysit mode
1. Press m, select Off and press mOK.

Advanced Settings

Advanced Set
Recall Time Dial Mode Call Barring Baby call Registration Select Base Unregistration Change PIN Reset Auto prefix Country Conference

Recall Time

Recall time (or dial delay) is the time delay by which the line will be disconnected after you press r key. It can be set to short, medium or long. The default value of recall time that is preset in your CD530 should be the best suited for your country network and therefore you should not need to change it.

To set recall time

1. 2. Press mMENU, scroll Recall Time.
: to Advanced Set and press mSELECT and press mSELECT to enter
Scroll to select Short / Medium / Long and press mSELECT to confirm. A confirmation beep is emitted and the screen returns to previous menu. This setting is useful when using network services. The use of some services accessed with [r + 1] , [r + 2] , [r + 3] (call waiting, call forward.) will depend on your recall time setting. Please contact your network provider for more details on this feature.

Advanced Settings Dial Mode
The default value for dial mode that is preset in your CD530 should be the best suited for your country network and therefore you should not need to change it. There are 2 dial modes: Tone or Pulse.

To set dial mode

mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Dial Mode and press mSELECT. 2. Scroll : to Tone or Pulse and press mSELECT to confirm.

Call Barring

Call barring enables you to restrict selected handsets from dialling a phone number beginning with certain numbers. You can set up to four different barring numbers, with each number containing up to 4 digits. If you have modified the Master PIN before and it is not the default 0000, you will be required to enter the Master PIN before you can activate or deactivate call barring mode, add or modify call barring number.
To activate/deactivate Call Barring mode
1. 2. 3. 4. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Call Barring and press mSELECT. Enter the Master PIN when prompted and press mOK to confirm. Press mSELECT to enter Barring Mode. Scroll : to On or Off and press mSELECT to confirm. A confirmation tone is emitted and the screen returns to previous menu.
To modify Call Barring number
1. 2. 3. 4. 5. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Call Barring and press mSELECT. Enter the Master PIN when prompted and press mOK to confirm. Scroll : to Barring Number and press mSELECT. Scroll : to Number 1, Number 2, Number 3 or Number 4 and press mSELECT to confirm. Enter a maximum of 4 digits and press mOK to confirm. A confirmation beep is emitted and the screen returns to stand-by mode. If a restricted number is dialled, the call will not be connected. When this happens, the phone emits an error tone and returns to stand-by mode.
Advanced Settings Baby Call
When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 24 digits for baby call number.
If you have modified the Master PIN before and it is not the default 0000, you will be required to enter the Master PIN before you can activate or deactivate Baby Call mode or change Baby Call number.
To activate Baby Call mode
mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Baby call and press mSELECT. 2. Enter the Master PIN when prompted and press mOK to confirm. 3. Press mSELECT to enter Mode. 4. Scroll : to On and press mOK to confirm.

One CD530 handset can register up to 4 different CD530 Base stations. By default, the handset will register to BASE 1. If you select Any Base, the handset will register to the nearest base station.
To manually select a base station
mMENU, scroll : to Advanced Set press mSELECT, scroll : to Select Base and press mSELECT. 2. Scroll : to the desired base station and press mOK to confirm.
1. Press 3. The handset will start searching for the base station. If the selected base is found, a long confirmation tone is emitted.
Advanced Settings Unregistration

To unregister a handset

: to Advanced Set and press mSELECT, scroll : to Unregistration and
Enter the Master PIN when prompted and press mOK to confirm. Press on the handset keypad the handset number corresponding to the handset that you wish to unregister. If there are no key presses within 15 seconds, the unregistration procedure will be aborted and the handset returns to stand-by mode. A long confirmation beep is emitted to indicate successful unregistration and the screen shows Unregistered.

Change Master PIN

The Master PIN is used for setting call barring/baby call number and for registration/unregistration of handsets. The default Master PIN number is 0000. The length of the PIN is 4 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.

To change Master PIN

1. 2. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Change PIN and press mSELECT. Enter the current Master PIN when prompted and press shown as asterisks (*) on the screen.
mOK to confirm. The PIN entered will be
If an incorrect PIN is entered, Incorrect Pin will be displayed and the screen returns to stand-by mode. If your PIN number is the default 0000, step 2 is skipped. 3. 4. Enter new PIN and press mOK. Enter new PIN again and press mOK to confirm PIN change. A confirmation tone is emitted, the message New PIN Stored appears and the screen returns to previous menu. If the Master PIN is modified, you will be required to enter the Master PIN before you can modify Call Barring and Baby Call settings.

Advanced Settings Reset

Reset to default settings
mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Reset and press mSELECT. 2. Enter the Master PIN when prompted and press mOK.
1. Press If your PIN number is the default 0000, step 2 is skipped. 3. Scroll : to Yes and press mSELECT. A confirmation beep is emitted, and the unit is reset to its default settings (please see "Default settings" on page 16). The WELCOME mode will appear again after master reset.

Auto Prefix

The maximum length of an auto prefix number is 5 digits. Once the number is set, it will be automatically inserted at the beginning of each number that will be dialled.
To set auto prefix number
1. 2. 3. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Auto prefix and press mSELECT. The last stored auto prefix number is displayed (if any). Enter the number and press mSELECT to confirm. A confirmation beep is emitted and the screen returns to previous menu.

Country Setting

The availability of this menu is dependent on your country. You can select another country different from the one chosen during Welcome mode.
mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Country and press mSELECT. 2. Enter the Master PIN when prompted and press mOK to confirm.
1. Press You need to enter the Master PIN even if your PIN is 0000 (default PIN).
3. Scroll : to the country of your choice and press mSELECT to confirm. Once the country is selected, the default line settings for the selected country will be applied to the phone automatically (e.g. Recall time, Dial mode, Language, etc).

Conference Mode

When Conference mode is activated, you can initiate a three-party conference call with a second handset registered to your base station automatically if the second handset takes the line when there is already an external call in progress. The default setting for this mode is Off.
To activate/deactivate conference mode
1. 2. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Conference and press mSELECT. Scroll : to On or Off and press mSELECT to confirm. A confirmation beep is emitted and the screen returns to previous menu.

Network Services

Net. Service
Call Forward Call Fwd Busy Call Fwd UnAns Voice Mail Call Back Cancel Call Bk Withhold ID This menu provides a convenient means for you to access, activate or deactivate some network services that are country/subscription dependent. Contact your network provider for more information about these services. The default numbers and values that are preset in your CD530 should be the best suited for your country network and therefore you should not need to change them.

Call Forward

There are 3 call forwarding options available: Unconditional Call Forwarding, When Busy and When Unanswered.
Set up Call Forward number
1. 2. 3. 4. Press mMENU, scroll : to Net. Service and press mSELECT. Scroll : to the type of call forwarding option you wish to set (Call Forward / Call Fwd Busy / Call Fwd UnAns) and press mSELECT. Scroll : to Settings and press mSELECT to enter the number for forwarding. Press mOK to confirm. Press mMENU, scroll : to Net. Service and press mSELECT. Scroll to the type of call forwarding option you wish to set (Call Forward / Call Fwd Busy / Call Fwd UnAns) and press mSELECT. Press mSELECT to Activate. The number string for that selected service will be dialled. When the number has been dialled, press e to return to stand-by mode. When this feature is activated, depending on the call forwarding option you have set, your incoming calls will be forwarded to the number of your choice.

Scroll : to Settings and press mSELECT. Enter the required number for cancelling of call back and press mOK. Press mMENU, scroll press mSELECT.
Activate Cancel Call Back
Press mSELECT to Activate. The number string for that selected service will be dialled. When the number has been dialled, press e to return to stand-by mode.

Withhold ID

1. 2. 3. Press mMENU, scroll : to Net. Service and press mSELECT, scroll : to Withhold ID and press mSELECT. Scroll : to Settings and press mSELECT. Enter the required number for withholding ID and press mOK. Press mMENU, scroll : to Net. Service and press mSELECT, scroll : to Withhold ID and press mSELECT. Press mSELECT to Activate. The number string for that selected service will be dialled. When the number has been dialled, press

Activate Withhold ID

Deactivate Withhold ID
1. 2. 3. 4. Press mMENU, scroll : to Net. Service and press mSELECT, scroll : to Withhold ID and press mSELECT. Scroll : to Deactivate and press mSELECT to confirm. The number string for that selected service will be dialled. When the number has been dialled, press e to return to stand-by mode.

Memory

The objective of this game is to find and match different pairs of graphics in the shortest possible time using your memory. To win, you have to complete matching all 8 pairs of graphics in a 4x4 matrix.

To start the game

1. 2. Press mMENU, scroll game.
: to Games and press mSELECT, press mSELECT to enter Memory
An instruction screen is displayed. Press 2 / 4 / 6 / 8 keys to move up / down / left / right respectively. Press 5 to select.

Press mSELECT or press

To exit from the game, press
5 to start the game. >.
Problem The icon is not blinking when the handset is placed on the base
Troubleshooting Troubleshooting of the phone
Causes Bad battery contact Dirty contact Battery is full No dialling tone No power Solution Move the handset slightly Clean the battery contact with a cloth moistened with alcohol No need to charge Check the connections. Reset the phone: unplug and plug back in the mains Charge the batteries for at least 24 hours Move closer to the base station Use the line cable provided Connect the line adaptor (when needed) to the line cord Move closer to the base station Move the base station at least one metre away from any electrical appliances Register the handset to the base station Move closer to the base station