530_535__. 1 , 1, 2006 3:52

Welcome

Quick start guide

Connect Install Enjoy

530_535__. 2 , 1, 2006 3:52

Whats in the box

Handset

Base station

Power supply for base station

Line cord

2 AAA rechargeable batteries

Battery door

User Guide

Quick Start Guide

Warranty card
The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.
WARNING Always use the cables and batteries that came with your phone.
530_535__. 3 , 1, 2006 3:52

Connect

Connect the base station
1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station.
Connect the power supply A
Connect the line cord to the line socket B
3. Connect the other end of the line cord to the telephone line socket and the other end of the power cable to the electricity socket.

Install

Insert batteries and charge
Charge handset for 24 hours

Insert batteries

Set date and time

1. 2. 3. 4.

Press mMENU. Scroll : to Clock & Alarm and press mSELECT. Press mSELECT to enter Set Date/Time. Enter current time (HH:MM) and current date (DD/MM/YY) and press mSELECT.
Now, you are ready to use your phone.
530_535__. 4 , 1, 2006 3:52
Enter the phone number and press r. OR Press r and enter the phone number.

Make a call

Answer a call End a call
When the phone rings, press r key. Press e key.
Adjust earpiece volume during a call
Press : to select from Volume 1 to Volume 5.
1. Press mMENU, scroll : to Personal Set and press mSELECT, press Handset Tones, scroll : to Ring Melody and press mSELECT. 2. Scroll : to your desired melody to play the melody. 3. Press mSELECT to set the ring melody. A confirmation beep is emitted and the screen returns to previous menu.

Set the ring melody

mSELECT to enter
1. Press mMENU, scroll : to Phonebook and press mSELECT, press mSELECT to enter New Entry. 2. Enter the name of the contact (maximum 12 characters) and press mOK. 3. Enter the number (maximum 24 digits) and press mOK. 4. Enter the SMS Box number and press mOK (only for UK). (The default SMS Box is 9. To modify, press >CLEAR and then enter the number (0 to 9).) 5. Scroll : to choose a group (<No Group>, <Group A>, <Group B>, <Group C>) and press mSELECT to confirm. A long confirmation beep tone is emitted. 1. Press d in stand-by mode or press mMENU, scroll scroll : to List Entry and press mSELECT. 2. Press : to browse the phonebook.
Store a contact in the phonebook

Access the phonebook

: to Phonebook and press mSELECT,
530_535__. 5 , 1, 2006 3:52
Switch the handset On/Off
Press and hold e key for 5 seconds to switch off the handset in stand-by mode. Short press e key to switch on the handset again.
Keypad lock/unlock Paging
Press and hold * key for 2 seconds to lock and unlock keypad in stand-by mode. 1. Press c key on the base until the handset starts to ring. 2. Once the handset is retrieved, press e to end the paging. Press To Enter the main menu from stand-by mode. Select the function displayed on the handset screen directly above it. Activate mute function during a call. Go to redial list from stand-by mode. Select the function displayed on the handset screen directly above it. Answer an incoming external or internal call. Insert R for operator services when on the line. Hang up a call. Long press from menu browing to return to stand-by mode, short press to return to previous menu. Long press in stand-by mode to switch off the handset, short press to switch on the handset again. Access call log from stand-by mode. Scroll up a menu list or go to the previous phonebook or call log record. Increase earpiece volume during a call. Go to the previous character in editing mode. Access phonebook from stand-by mode. Scroll down a menu list or go to the next phonebook or call log record. Decrease earpiece volume during a call. Go to the next character in editing mode. Initiate an internal call. Answer an incoming call in handsfree mode. Activate and deactivate the loudspeaker during a call. Dial # in stand-by mode. Long press to mute the ringer in stand-by mode. Insert a pause in dialling mode. Switch between upper and lower case in editing mode. Dial * in stand-by mode. Long press to activate and deactivate keypad lock.

m > r e u d c v # *

530_535__. 6 , 1, 2006 3:52

Troubleshooting

For more information, please refer to p.50 of CD530 user manual and p.58 of CD535 user manual. Problem

No dialling tone

Solution
Check the connections Charge the batteries for at least 24 hours Use the line cable provided

Poor audio quality

Move closer to the base station Move the base station at least one metre away from
any electrical appliances

icon is blinking

Register the handset to the base station Move closer to the base station Check your subscription with your network operator
Caller Line Identification
(CLI) service does not work

Need help?

User Manual
Refer to the User Manual that is supplied with your CD530/535.

Online help

www.p4c.philips.com