2010, December 15 data subject to change
TTX400/410 suspension-/mounting brackets
TTX400, mounting brackets The TTX400 suspension-/mounting brackets have been designed to allow maximum ease and speed in installation and to provide the greatest possible flexibility in use. All brackets are simply clicked on the trunking. They are suitable for direct fixation or with chains, threaded rods and steel cables for suspension fixation. Distance between the brackets is up to 3 metres (when using the 583 trunking sections), resulting in faster installation and lower costs. All mounting and suspension brackets are constructed from galvanised stainless steel, painted white.The use of TTX400 on a non-stable surface such as a mezzanine floor requires a special suspension bracket. All such installations should be referred to the local Philips Lighting key account manager.
TTX400, mounting brackets

Dimensional drawing

ZTX400 UCD

ZTX400 CCD

155-171

ZTX400 CB

156-177

ZTX400 CDB

ZTX400 MB

ZTX400 PB

ZTX400 UB

ZTX400 MB-SW1.8

Accessories
Universal bracket for suspending TTX400/410 sections, including plastic cable duct ZTX400 CD 582/583 on threaded rods, or M13 internally threaded suspension tubes.
Chain bracket cable duct for suspending the TTX400/410 sections with the plastic cable duct ZTX400 582/583 CD from chains or steel cables. Includes adjustable suspension hook.
Chain bracket for suspending TTX400/410 sections from chains or steel cables. Includes adjustable suspension hook.
Universal bracket for suspending TTX400 section including unwired section TTX410 which then serves as cable duct.

ZTX400 CH

Adjustable suspension hook with 2 brass nuts for use with ZTX400 UB, ZTX400 UCD or ZTX400 CDB.
Ceiling mounting bracket (8mm diameter hole) for mounting TTX400/410 sections directly onto the ceiling
Profile bracket for mounting TTX400/410 sections onto system ceilings with visible 24 mm T-profiles.
Universal bracket for suspending TTX400/410 sections on threaded rods, or M13 internally threaded suspension tubes.
Cable suspension bracket for suspending the TTX400/410 sections from steel cable M 1.5. Integrated clasp mechanism allows easy, tool-less adjustment of the mounting height. Steel cable can be ordered separately with accessory ZTX400 WIRE (10 m).

Product details

Longitudinal flexibility. The position of the mounting bracket can still be adapted if it is clicked onto the trunking section. This ensures maximum flexibility.

Compare table

Order code Product family code
ZTX400 ZTX400 ZTX400 ZTX400 ZTX400 ZTX400 ZTX400 ZTX400 ZTX400

Suspension accessories

UCD CCD CB No CH MB No UB MB-SW1.8

Mechanical accessories

No No No CDB No No PB No No

Optical cover

No No No No No No No No No
2010 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com/lighting 2010, December 15 data subject to change