Reviews & Opinions
Independent and trusted. Read before buy Philips CDR560!

Philips CDR560

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Philips CDR560, size: 794 KB
Related manuals
Philips CDR560-00S

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Philips CDR560About Philips CDR560
Here you can find all about Philips CDR560 like manual and other informations. For example: review.

Philips CDR560 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Philips CDR560 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Philips CDR560 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
LivernoisYards 10:04pm on Tuesday, March 30th, 2010 
A Great Product but not one to rush into...(making cds) This cd-r has an array of uses that make your music life mucheasier.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

CDR 560/538

CD recorder

DISPLAY

AUTO / MAN UAL

REPEAT 1 TOTA L

CD SYNC RECORD

FINALIZE

CD SYNCRO

POWER ON/ OFF

MIN I CD REC OR DER

RECORDABLE L CD

-50 -40 -30 -20 -10 -6 -3 0

RECORD

Recordable

OPEN/CLOSE ERASE

RECORD LEVE L
Instructions for use Mode demploi Instrucciones de manejo
IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Water and Moisture - The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like. 6. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer. 6A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 11. Grounding or Polarization - The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. 12. Power-Cord Protection - Power-Supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Cleaning - The appliance should be cleaned only as recommended by the manufacturer. 14. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 15. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 16. Damage Requiring Service - The apliance should be seviced by qualified service personnel when : a. The power-supply cord or plug has been damaged; or b. Objects have fallen, or liquid has been spilled into the appliance; or c. The appliance has been exposed to rain ; or d. The appliance does not appear to operate normally or exhibits a marked change in performance; or e. The appliance has been dropped, or the enclosure damaged. 17 Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personel.
7. Wall or Ceiling Mounting - The applicance should be mounted to a wall or ceiling only as recommended by the manufacuter. 8. Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or simular surface that may block the ventilation openings; or, placed in a built-in instalation, such as a bookcase or cabinet that may impede the flow of air trough the ventilation openings. 9. Heat - The applicance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 10. Power Sources - The appliance should be connected to a power supply only of the type described in the operation instructions or as marked on the appliance.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK , DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CONTENTS

English..4

Franais..19

Espaol..37

Enspaol

Franais

English

GENERAL INFORMATION
CAUTION USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

IMPORTANT

THIS PRODUCT WAS FCC VERIFIED UNDER TEST CONDITIONS THAT INCLUDED USE OF SHIELDED CABLES AND CONNECTORS BEWTEEN SYSTEM COMPONENTS. IT IS IMPORTANT THAT YOU USE SHIELDED CABLES TO REDUCE THE POSSIBILITY OF CAUSING INTERFERENCE TO RADIOS, TELEVISION SETS AND OTHER ELECTRONIC DEVICES. IF YOU HAVE ANY PROBLEMS CONTACT YOUR DEALER.
ANY CHANGE OR MODIFICATIONS TO THE EQUIPMENT BY THE USER NOT EXPRESSLY APPROVED BY THE GRANTEE OR MANUFACTURER COULD VOID THE USERS AUTHORITY TO OPERATE SUCH EQUIPMENT.

LIMITED WARRANTY

CD-R PLAYER
One Year Free Labor One Year Exchange Warranty on Parts This product must be carried in for repair. WHO IS COVERED?
You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase.
BEFORE REQUESTING SERVICE.
Please check your owners manual or our website at WWW.ACDR.Philips.com before requesting service. Adjustments of the controls discussed there may save you a service call.

WHAT IS COVERED?

Warranty coverage begins the day you buy your product. For one year thereafter, all parts will be repaired or replaced, and labor is free. After one year from the day of purchase, you pay for the replacement or repair of all parts, and for all labor charges. All parts, including repaired and replaced parts, are covered only for the original warranty period. When the warranty on the product expires, the warranty on all replaced and repaired parts also expires.
TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S.VIRGIN ISLANDS.
Take the product to a Philips factory service center (see enclosed list) or authorized service center for repair.When the product has been repaired, you must pick up the unit at the center. Centers may keep defective parts. (In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied warranties, including implied waarranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. Because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.)

WHAT IS EXCLUDED?

Your warranty does not cover: labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics Company. reception problems caused by signal conditions or cable or antenna systems outside the unit. a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.) a product that is used for commercial or institutional purposes (including but not limited to rental purposes).

TO GET WARRANTY SERVICE IN CANADA.
Take the product to a Philips consumer service center (listed below), self-servicing dealer ar autorized service depot. Philips Electronics Ltd. 601 Milner Avenue, Scarborough, Ontario, M1B 1M8 (416) 292-Levy Street, St. Laurent Qubec, H4R 2N9 (514) 956-Boundary Road,Vancouver, B.C.VSM 3Y7 (604) 294-3441 (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.)
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics Company. In countries where Philips Consumer Electronics Company does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).

REMEMBER.

Please record the model and serial numbers found on the product below. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary.

MAKE SURE YOU KEEP.

Please keep your sales receipt or other document showing proof of purchase. Attach it to this owners manual and keep both nearby. Also keep the original box and packing material in case you need to return your product.

MODEL # SERIAL #

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. Philips Service Company, P.O. Box 555, Jefferson City,Tennessee 37760,
EL6191E001 / MAC 6058 / 10-96 IB7922E001

(800) 531-0039

Table of contents
GENERAL INFORMATION Technical information..4 Disc for recording...5 Discs for playback...5 Maintenance...5 Accessories...5 OPERATING BUTTONS AND CONNECTIONS Operating buttons on the front.6 Connections on the back...6 DISPLAY DISPLAY explanation..7 DISPLAY messages...7 INSTALLATION Connections general..8 Analogue connections..8 Digital coaxial connections..9 Digital optical connections..9 Power supply..10 Set-up recommendations..10 Inserting batteries in the remote control..10 REMOTE CONTROL & INSERTING DISCS Remote control commands..11 Inserting discs..11 RECORDING Remarks about recording..12 Digital recording - unsynchronized..12 Synchronized digital recording - CD-SYNC.13 Analogue recording..14 Finalizing CD-R & CD-RW discs..15 Unfinalizing CD-RW discs..15 ERASING & PLAYING Erasing CD-RW discs..16 Playing a CD...16 PLAYING Selecting a track or searching.16 Shuffle play...17 Repeat CD, track or program..17 Programming..17 FIXING PROBLEMS Troubleshooting...18 Diagnostic program..18

Discs for playback

Your CD recorder is able to play: - All prerecorded audio CDs, and combined CDs such as CD Extra. - All Audio CD-R and Audio CD-RW. Note: CD-R discs recorded with a computer can only be used when they are correctly treated according the audio standard (IEC958: Consumer part). Single session only!
Do not expose the CD recorder, batteries or CDs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight).

AUTO / MANUAL

CDR 560 MINI CD

POWER ON/OFF

RECORDER

RECORD PREV NEXT

OPEN/CLOSE

RECORD LEVEL

If the CD recorder cannot read CDs correctly, use a cleaning CD to clean the lens before taking the CD player to be repaired. Other cleaning methods may destroy the lens. Always keep the tray closed to avoid dust on the lens. The lenses may cloud over when the CD recorder is suddenly moved from cold to warm surroundings, making it temporarily impossible to play a CD. Leave the CD recorder in a warm environment until the moisture evaporates.

Accessories

- 2 Analogue audio cables (with red and white plugs) - 1 Digital coaxial cable (with black plugs) - (CDR560 only) - Power cord - 2 Batteries - (CDR560 only) - Remote control - (CDR560 only) - Guarantee - Optical cable (CDR538 only)

Maintenance

OPERATING BUTTONS AND CONNECTIONS

SOURCE

AUTO / MANUA

REPEAT 1 TOTAL

REM TIME CD SYNC RECORD

POWER ON/OF F

MINI CD RECO RDER

IN ANAL

OUT OG IN DIGI

IN OUT ANALOG

IN OUT DIGITAL

IN OPTICAL

Operating buttons on the front
! @ # $ % ^ & ON/OFF. turn the CD recorder ON and OFF Disc tray AUTO/MANUAL. select track numbering method SOURCE. select digital or analogue input DISPLAY. select display information DISPLAY (information screen) ERASE. erase recording FINALIZE. finalize recording OPEN/CLOSE. open/close disc tray RECORD. record CD-SYNC.synchronized recording (automatic start when recording) STOP 9. stops . previous track/search back PLAY 2. start to play or record PAUSE ;.interrupt play . next track/search forward/new track REC LEVEL. adjust the recording level (analogue)

Connections on the back

1 Connection to power supply 2 ANALOG IN. connects to the line output of an amplifier (left and right) 3 ANALOG OUT. connects to the line input of an amplifier (left and right) 4 DIGITAL IN. connects to the digital coaxial output of a CD player 5 DIGITAL OUT. connects to the digital coaxial input of e.g. amplifier or recording device 6 OPTICAL IN. connects to the digital optical output of a CD player

Display explanation

Messages as listed and explained here may appear on the display for your guidance.

DIG AUTO ANALOG

PROG RECORDABLE L CD REWRITABLE R
CD SYNC RECORD FINALIZE ERASE COPY PROHIBIT PAUSE
1 ANALOG. analogue input is selected 2 DIG. lights up when digital input is selected and flashes when digital input is incorrect. 3 AUTO TRACK. automatically increase track numbers 4 REPEAT (1). repeat function activated during play 5 Track number and time. 6 CD-SYNC. synchronized recording is active. 7 RECORD. lights up during recording and flashes in record standby 8 FINALIZE. lights up during finalizing and flashes in finalize standby 9 ERASE. lights up during erase recording and flashes in erase standby 0 COPY PROHIBIT. Lights when trying to record digital protected audio ! PAUSE. pause function is active @ Record/play level bar (analogue) # RECORDABLE. Unfinalized CD-R disc inserted $ REWRITABLE. CD-RW disc inserted % CD.CD inserted (a pre-recorded CD or finalized CD-R or CD-RW disc) ^. remote control active & PROG. programmed play
READING.player is reading disc information OPC.during OPC procedure OPEN.during tray opening CLOSE.during tray closing NO DISC.no disc inserted or disc unreadable UPDATE.updating disc contents ERROR.write error during recording RECOVER.during recovery procedure WAIT.recording stop (4 seconds) in progress SYNC.during synchronized recording standby TRACK.during erase-track standby DISC.during erase-disc standby SERVICE.self-test failed OPCFAIL.laser power calibration failed. Further recording not possible FULL.program full CD FULL.no more recording possible EMPTY..no recordings on disc, finalizing not possible NO AUDIO (flashing) no audio disc loaded or failure to read data FINAL..laser power calibration performed 96 times, finalize disc COAXIAL.digital coaxial input selected OPTICAL.digital optical input selected SHUFFLE.during shuffle RC-DISC.recovered disc. Finalizing not possible TOC.flashes during unfinalize disc standby, lights during unfinalize disc INPUT.during input selection (CD-SYNC) ANALOG.analogue input selected

Display messages

INSTALLATION

Connections general

The CD recorder has the following recording inputs: - Digital optical input - Digital coaxial input - Analogue input

Analogue connections

The CD recorder has the following playback outputs: - Digital coaxial output - Analogue output The connections to be made depend upon the possibilities your audio equipment offers. Please refer to the user manuals for your other audio equipment first. Recordings made from a digital source (CD player) via the digital optical or digital coaxial connection will give the best performance in audio and usability (e.g. auto-track). (The digital optical connection is less sensitive to external disturbances). If your equipment does not offer digital connections, the high quality Analogue-Digital-Converter of your CD recorder will ensure high audio performance when recordings are made from the analogue input. Playback via the digital coaxial output of the CD recorder gives the best audio performance. If your equipment does not offer digital connections the high quality Digital-AnalogueConverter of the CD recorder ensures a high sound quality via the analogue output. We recommend that both digital and analogue connections be made, so that analogue recordings can be made when digital recording is not possible. The most common ways of connecting the CD recorder are explained below. If you still have difficulties with the connections, feel free to contact the Philips Consumer Service desk in your country.

OUT OG IN OUT DIGITA L

IN OPTIC

CD REC

ORDER ER

RECEIV

Use the audio cables supplied. Connect the red plugs to the R sockets, and the white plugs to the L sockets. 1 For recording, connect cable 1 between the ANALOGUE IN sockets on the CD recorder and the LINE- or TAPE OUT sockets of an amplifier. (FW538) Note: For recording directly from a CD player the analogue input of the CD recorder should be connected to the analogue output of the CD player. 2 For playback, connect cable 2 between the ANALOGUE OUT sockets on the CD recorder and the input sockets of an amplifier e.g. TAPE IN, CD-R or AUX. (FW538) Note: Never use the PHONO input. For use with FW538:

IN OUT DIGITA L

OUT ANAL OG

IN OPTIC AL

AUX IN LINE OU T
Digital coaxial connections Digital optical connections

OUT OG IN

OUT DIGITA L

L L R L

OUT OG

CD PLA YER

IN OUT DIGITA L OUT OPTIC AL

IN ANAL OUT OG

Use the supplied cable with the black plugs. 1 For recording, connect the cable 3 between the DIGITAL IN socket on the CD recorder and the DIGITAL OUT socket of a CD player. Note: Your CD recorder is equipped with a digital coaxial output. This output can be used for digital playback.

1 Remove the dust caps from the digital optical connections. (We recommend that you save the caps). 2 For recording, connect a fiber-optic cable 4 between the digital optical input of the CD recorder and the digitaloptical output of a CD player. (FW538) Note: For playback the digital coaxial output or analogue output should be connected to an amplifier. For use with FW538:
IN IN OUT OUT DIGITA DIGITA L L

IN IN OPTIC OPTIC AL AL

When connecting the Digital Optical cable, make sure it is fully inserted until there is a click.

OUT OPTIC AL

Power supply Inserting batteries in the remote control

CDR 560

1 Plug the power cord supplied into the MAINS connector on the CD recorder, then into a wall socket. 2 Press ON/OFF to turn the CD recorder on. Note: - The CD recorder will automatically adjust to the local mains voltage. - When the CD recorder is in the OFF position, it is still consuming some power. If you wish to disconnect your CD recorder completely from the mains, withdraw the plug from the AC Outlet.
Note: For CDR538 see Remote Control FW538. 1 Open the battery compartment cover. 2 Insert 2 batteries (AAA, R03 or UM-4; as supplied) as shown. 3 Replace the cover.
Note: We recommend using 2 batteries of the same type and condition.

Set-up recommendations

- Place the CD recorder on a solid, vibration free surface. - Do not place the CD recorder near a source of heat or in direct sunlight. - Do not use the CD recorder under extremely damp conditions. - If the CD recorder is placed in a cabinet, make sure that a one-inch space remains free on all sides of the recorder for proper ventilation.
Batteries contain chemical substances; dispose of them properly.
REMOTE CONTROL & INSERTING DISCS
Remote control commands Inserting discs

AUTO / MANUA L

1 Press OPEN/CLOSE (9) to open the disc tray. 2 Insert a CD, CD-R or CD-RW in the appropriate recess in the tray, label side up. IMPORTANT: For recording it is important that the blank disc be completely free of dust particles or scratches. (see Disc Maintenance, p.5). 3 Gently push the front of the tray or press OPEN/CLOSE to close the tray (see also Playing a CD). The display will indicate the type of disc you have inserted.
PROGRAM. programs track numbers DISPLAY. selects display information Number keys 0 - 9. select a track by number SHUFFLE. plays CD(RW) or program in random order Q. searches backward PREVIOUS O. selects the beginning of a previous track STOP 9. stops CD(RW) and clears a program PAUSE ;. interrupts CD(RW) play NEXT P. selects the beginning of subsequent PLAY 2. starts CD(RW) play R.searches forward REPEAT. repeat play CD. CDR 765 only CD-R. CDR 765 only OPEN/CLOSE.opens or closes the disc tray When you press a button on the remote control, the indicator on the display will light up.

If a CD-R is finalized the display will indicate CD. If a CD-RW is finalized it is still a CD-ReWritable and the display will indicate CD REWRITABLE. If you insert a blank or partly-recorded CD-R or CD-RW, the CD recorder will calibrate the disc for optimum recording. During this process the display will first show OPC and then the number of audio tracks previously recorded. Calibration can take up to 25 seconds.
DIG AUTO OG TRACK REPEAT 1 TOTAL REM TRACK TIME CD SYNC RECORD FINALIZE ERASE COPY PROHIBIT
Note: Unless otherwise stated, all operating buttons are on the front of the CD recorder. The corresponding buttons on the remote control can also be used.

ROG RECORDABLE L

Note: Only Audio CDs will be accepted. If a non-audio disc is inserted, the display will indicate NO AUDIO.

RECORDING

Remarks about recording
You will soon discover how easy it is to make your own CDs. Nevertheless, we recommend that you use a CD-RW disc for your first try. The three ways to make recordings are described below: - Digital unsynchronized - Digital synchronized - Analogue The recording procedure is the same for CD-Rs or CD-RWs. If the disc is a CD-RW and is already finalized you must unfinalize it first (page 15). If the disc already contains recordings, the CD recorder will automatically search for the end of the last track, so that you can start recording from there. There must be at least 7 seconds of recording time left on the disc, or you will not be able to activate the record standby mode. If the display indicates COPY PROHIBIT, no digital recording can be made of the source material. Recording will not start or will stop after 4 seconds. The Serial Copy Management System (SCMS) only allows digital recording under specific conditions: - It is not possible to make a digital copy from a digital copy. - Analogue recording is always possible! - The number of recordings from the original is unlimited. A maximum of 99 tracks can be recorded on a disc. The minimum allowable track length is 4 seconds. Digital recordings can be made from CDs (or other sources with an output Sample Frequency of 44.1 kHz +/- 100 ppm) via the digital input. Important: If you want to play the recorded CD-R disc on a regular CD player, it must be finalized first. See finalizing discs (p.15). Finalized CD-RW discs play only on CD-RW compatible CD players. Preparing for digital recording 1 Make sure the disc is absolutely free of scratches and dust particles. 2 Press Source repeatedly until (depending on the digital connection used): DIG COAXIAL or DIG OPTICAL appears on the display.

DIG AUTO ANALOG PROG C TRACK REPEAT 1 TOTAL REM TRACK TIME CD SY RECO FINAL ERA CO
Digital recording - unsynchronized

AUTO / MAN

POWER ON/O FF

MIN I CD REC ORD ER

OPEN/CLOS

RECORD LEVE E

3 Press AUTO/MANUAL to switch between auto and manual track numbering. If AUTO is selected, (preferred) AUTO TRACK will appear on the display.
DIG AUTO TRACK REPEAT 1 TOTAL ANALOG PROG REM TRACK TIME CD S REC FINA ERA
AUTO: The track increments are automatically copied from the digital source material. MANUAL: Track numbers can be incremented manually by pressing. (minimum track length is 4 seconds). (This can also be done in AUTO mode). Track numbers cannot be changed after recording. Note: AUTO TRACK works only with Consumer Sources with a digital output signal according to the IEC 958 (consumer part) audio standard.
Start digital recording 1 With the recorder stopped, press RECORD to enter the Record standby mode. RECORD will flash.
DIG AUTO ANALOG PROG RECORDABLE L TRACK REPEAT 1 TOTAL REM TRACK TIME CD SYNC RECORD FINALIZE ERASE COPY
If DIG also flashes, the digital connection is incorrect. 2 To start recording, press PLAY and immediately start the source (from stop mode). RECORD lights continuously. The track number and recording time used will be indicated on the display. To record a 3-second silence at the start of a track, press PAUSE. To check the (remaining) recording time, press DISPLAY. (This can also be done during the recording.) 3 To stop recording, press STOP on the CD recorder. RECORD will go out. To interrupt recording, press PAUSE. RECORD starts to flash. Resume at step 2. After recording the display will show UPDATE for several seconds. Note: With AUTO TRACK on, the recorder will stop automatically. Recordings from DAT or DCC will stop after 20 seconds silence. With AUTO TRACK off, the AUTO STOP mode is disabled. Preparing for synchronized digital recording The CD-SYNC feature enables you to make a fast and easy digital recording of a CD. Track increments are automatically detected from the digital source material. Track increments cannot be added manually. 1 Make sure the disc is absolutely free of scratches and dust particles. 2 Press Source repeatedly until (depending on the connection used): DIG COAXIAL or DIG OPTICAL will appear on the display. Start synchronized digital recording 1 With the CD recorder stopped, press CD-SYNC. On the display, CD-SYNC & SYNC appears. After a time, RECORD starts to flash.
DIG AUTO ALOG PROG TRACK REPEAT 1 TOTAL REM TRACK TIME CD SYNC RECORD FINALIZE ERASE COPY
If DIG also flashes, the digital connection is incorrect. 2 To start recording, press Play on the digital source. The CD recorder automatically starts to record and RECORD lights continuously. The track number and recording time used will be indicated on the display If you start the source during a track, CD-SYNC will not start recording until the beginning of the next track. To check the (remaining) recording time, press Display. (This can also be done during recording) 3 To stop recording, press STOP on the CD recorder. CD-SYNC and RECORD will go out. To interrupt recording, press PAUSE. RECORD will start to flash. To resume, press PLAY on the CD recorder.

Synchronized digital recording - CD-SYNC
After recording the display will show UPDATE for several seconds. Note: - The CD recorder will not start until it recognizes a digital signal. Although the reaction time is less than 200 milliseconds, the very beginning of the music may sometimes not be recorded. If this happens, you can start the recording manually (see digital recordingunsynchronized). - Recordings from DAT or DCC will only stop after 20 silence. Only make analogue recordings if digital recording is not possible. Preparing for analogue recording 1 Make sure the disc is absolutely free of scratches and dust particles. 2 Press Source repeatedly until: ANALOG appears on the display.
DIG AUTO ANALOG PROG TRACK REPEAT 1 TOTAL REM TRACK TIME

Analogue recording

3 Press AUTO/MANUAL to switch between auto and manual track numbering. If Auto is selected (preferred), AUTO TRACK appears on the display. AUTO: The track number is automatically incremented after a silence on the original of at least 3 seconds. MANUAL: Track numbers can be incremented manually by pressing. (minimum track length is 4 seconds ). (This can also be done in AUTO mode) Track numbers cannot be changed after recording. 4 With the recorder stopped, press RECORD to enter Record standby mode. RECORD will flash
DIG AUTO TRACK REPEAT 1 TOTAL REM TRACK TIME CD SYNC RECORD FINALIZE ERASE
5 Play the source first to set the optimal recording level on the CD recorder. 6 Adjust the REC LEVEL until all blue segments on the Record/Play Level bar light up but no red segments light continuously during the loudest passages. 7 Stop the source.
Start analogue recording 1 To start recording, press PLAY on the CD recorder and immediately start the source. RECORD lights continuously. The track number and recording time used appear on the display. To record a 3-second silence at the beginning of a track, press PAUSE. To check the (remaining) recording time, press Display. (This can also be done during the recording.) 2 To stop recording, press STOP on the CD recorder. RECORD will go out. To interrupt recording, press PAUSE. RECORD will start to flash. Resume at step 1. After recording the display will show UPDATE for several seconds. Note: With AUTO TRACK on, the recorder will stop automatically after 20 seconds silence. With AUTO TRACK off, the AUTO STOP mode is disabled.
Finalizing is a simple procedure that is necessary in order to play the discs on a regular (non-recording) CD player. Note: Finalizing prevents any further recording on a CD-R. A finalized CD-RW must be unfinalized to allow further recording or erasure of tracks. 1 Make sure the disc is absolutely free of scratches and dust particles. 2 With the recorder stopped press FINALIZE and then within 3 seconds press RECORD.
DIG AUTO ALOG PROG RECORDABLE L TRACK REPEAT 1 TOTAL REM TRACK TIME CD SYNC RECORD FINALIZE ERASE COPY

The approximate finalization time will appear in the display. RECORD & FINALIZE lights up. The display counts down through the finalization. On completion, the total number of tracks and the total time recorded will appear on the display. For CD-R CD RECORDABLE will change to CD on the display. For CD-RW no change will be seen on the display. Finalizing will last at least 2 minutes. Note: During finalization, the CD recorder will not accept operating commands.

Unfinalizing CD-RW discs

For CD-RW discs only. If you want to make more recordings (or to erase tracks) on a finalized disc you must unfinalize it first. The Table of Contents (TOC) on the disc will be removed. To unfinalize: 1 Press ERASE twice. On the display, TOC and ERASE will flash.
2 Press RECORD within 3 seconds. TOC and ERASE light up continuously during erasure. Note: This will take approximately 1 minute.
Finalizing CD-R & CD-RW discs

ERASING & PLAYING

Erasing CD-RW discs

For CD-RW discs only.

SOURCE DISPLAY

Playing a CD

You can erase: - track by track from the end. - the entire disc.
To erase the last track : 1 Make sure the disc is not finalized (Showing OPC on display during start up). Otherwise unfinalize first (p. 15) 2 Press ERASE. On the display, TRACK and ERASE will flash.
DIG AUTO LOG PROG C TRACK REPEAT 1 TOTAL REM TRACK TIME CD SYNC RECORD FINALIZE ERASE COPY
1 Press PLAY to start CD play. The track number and track time appear on the display, together with the record/play level indicator. 2 Press Display once, twice, or three times to see: remaining track time; Total remaining time; Track time with the record/play level bar off. 3 To interrupt play temporarily, press PAUSE. PAUSE will light up on the display 4 To continue play, press PAUSE again or press PLAY.
3 Press RECORD within 3 seconds. TRACK and ERASE light continuously during erasure.
To erase the entire disc: 1 Press ERASE once (for finalized CD-RW) and twice (for unfinalized CD-RW). On the display, DISC and ERASE will flash.
DIG AUTO ALOG PROG C TRACK REPEAT 1 TOTAL REM TRACK TIME CD SYNC RECORD FINALIZE ERASE COPY
5 To stop play, press STOP. The number of tracks and the total playing time will appear on the display
Selecting a track or searching
2 Press RECORD within 3 seconds. DISC and ERASE light continuously during erasure. Erasure of a complete disc may take up to 1.5 minutes.

RECORD LEV E

Selecting a track during play 1 Briefly press or one or more times. Play skips to the beginning of the present, previous or following track. or Press the required track number using the numerical keys on the remote control. For 2-digit track numbers, press the keys in rapid succession. Play skips to the beginning of the selected track. 16

PLAYING

Selecting a track when CD play is stopped 1 Briefly press or one or more times. 2 Press PLAY. Play starts at the selected track. or Press the required track number using the numerical keys on the remote control. For 2-digit track numbers, press the keys in rapid succession. Searching during CD play 1 Hold down or (or 5 or 6 on the remote control). The player first searches backwards or forwards at 10 times normal speed with sound at low volume, then goes to fast reverse or fast forward with sound muted. 2 Release the button at the desired passage. Play starts at the desired passage. Note: During Shuffle, Repeat or Program play, search is restricted to within the track being played at the time. 1 On the remote control press PROGRAM to start programming. PROG flashes on the display. 2 Press a track number with the number keys. For 2-digit numbers, press the keys in rapid succession. On the display, the track number appears briefly, followed by the total programmed tracks and total program time. 3 Repeat step 2 for all tracks to be programmed. You can program up to 30 tracks to play in any desired sequence. Tracks can be programmed more than once, but each time counts as a track.

Shuffle play

4 Press STOP or PROGRAM to end programming. PROG lights continuously. Note: - To review the program, press or in stop mode. - To add more tracks to the program, repeat steps 1 through 4. - If you try to store more than 30 tracks, FULL appears on the display 5 Press PLAY to start programmed play. Clearing a program 1 Press STOP if necessary to stop programmed play. 2 Press STOP again to clear the program. PROG disappears from the display. Note: The program is also cleared when you open the disc tray.
1 Press SHUFFLE (or PLAY) on the remote control before or during CD play to start shuffle play. The tracks on the CD (or program if set) play in random order. SHUFFLE will appear on the display between tracks. 2 Press SHUFFLE again to return to normal CD play. Note: Shuffle is also cleared when you open the disc tray.
Repeat CD, track or program
1 Press REPEAT on the remote control one or more times during CD play. When REPEAT 1 appears on the display, the current track plays repeatedly. When REPEAT appears on the display, the disc or program plays repeatedly. 2 To return to normal play, press REPEAT one or more times until: the REPEAT message disappears from the display. Note: - You can use shuffle in combination with repeat CD or program play. - Repeat is also cleared when you open the disc tray.

Programming

FIXING PROBLEMS

Troubleshooting

If you think your CD recorder is defective, it is wise to check this list first and run the diagnostic program. Maybe you have forgotten a simple step. Warning! Under no circumstances should you attempt to repair the CD recorder yourself as this will invalidate the guarantee. SYMPTOM: SOLUTION: No power check to ensure that the ON/OFF button is on check to ensure that the power cable is plugged in correctly switch the recorder OFF and then immediately back ON Auto track does not work check to ensure that auto track is selected. check to ensure that there are 3 seconds silence in between the tracks (analogue recording only) check to ensure that the source is a consumer source with the digital output according the IEC audio standard. No sound check the audio connections if using an amplifier, try using a different source Amplifier sound is distorted check to ensure that the CD recorder analogue output is not connected to the amplifier Phono input. Play will not start check to ensure that the label of the CD is facing up clean the disc check to ensure that the disc is not defective by trying another disc Remote control does not work point the remote control directly at the CD recorder check the batteries and replace if necessary select the right source first Will not record clean the disc. check to ensure that CD-RW is not finalized check to ensure that the disc is recordable and replace if necessary the disc is not an AUDIO disc wrong input source selected. Analog recording is distorted make sure the recording level is correct second pause between recordings see synchronized digital recording (CD-SYNC) p. 8 Player does not react switch the ON/OFF button on the front of the player off and back then on SERVICE on display after switching on try switching off and on again RECOVER on display a power failure has occurred during recording; the CD recorder is attempting to repair the disc. if RC-DISC then appears on the display, the disc cannot be recorded further, and cannot be finalized. However, it can be played on a CD recorder. on a CD-RW disc, the track being recorded is lost, but further recording and finalization can still be done. if OPC FAIL appears, no further recording is possible. You can still use the disc as a CD on this recorder.

 

Tags

P2B-DS WMA10 Dynamaxx Bissell 7901 645 AF XB12SS DLQ-3500 PC Loom KX-T4550B Babycook PPM1012 T57800 AVR 520 42sa1E Collector PCG-K315Z FC9222 DXZ665MP NW-S705F 1315XI Kx-tg2431 42LG30RA 42LG7000 AEU CU-3E18EBE VSX-1015TX XC-F10 SHR-1010 Model 420 Total WAR Gz-mg77 WJ-HDB502 PSS680 Curve 8310 RX-317TN Fvxs25FV1B WK-3500 MY310X Server Auraton 2005 B1445AV KX-FP373FX Nuvi 265T Pa3455U Viaccess 75 KW AX-500 Dvdr3590H 58 GC8261 Jimmy 2000 FS360 4100B ER8218C Pt690R Designjet 4500 41283 32WLK530HID XT45079 TX-28DTM1 LST-250 54mbps 11G OK-R36CR FMJ P35 42PF9956 TPA 3003 Dimension 9200 V-323N ARX4570 Edgelron 48GS FAX-1460 ICF-CD2000 Mobile K6742 KX-FP105 DMC-F2 29PT552A-78R LE37A558 Amarys 1200 RA300 Aegis EVO PD-F958 Driver 3 Review FL-50 EP706 MZ-42PM13 WFE1462K Aspire 2020 DVR-510 110 SE Carvin F600 Izzi ALU Device Krzr K3 RC68221 GT-9800F MC CNC SRG-118 Boss 614C Version 2 Hicom 150H

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101