Regelt het volume van de versterker/tuner. c Schakelt het versterker/ tunergeluid uit. * Selecteert de externe bron van de versterker.
B* Zoekt/scant het volgende radioprogramma.
* Wijzigt het geluideffect.
* Uitsluitend beschikbaar voor Philips producten.
34 M E E R I N F O R M AT I E OV E R U W A F S TA N D S B E D I E N I N G
WELCOME Congratulations on your choice of PHILIPS DSR 2210 satellite receiver. This PHILIPS satellite receiver will allow you to obtain digital satellite programmes and services. Note: - This product is destined for Netherlands. - You need to take out a subscription to access the services of CANALDIGITAAL. Refer to your "Welcome packet". English

CONTENTS

2.1 2.2 2.3.1 Safety instructions _______________3 Product description ______________4 Front view _____________________4 Rear view ______________________5 The remote control ______________6 Connecting up the receiver _______8 Connecting to your HiFi/Audio receiver equipement (Analogue/Digital) _______________9 Menu structure _________________10 Installing the satellite receiver ___11 Installation ____________________11 Technical information ____________13 Storing the channels _____________14 The menu ______________________15 Code and parental lock __________9.6.1 9.2 When you are watching a programme _______________________________23 When you are watching a programme ____________________23 When you consult the EPG _______7.1 7.8.1 8.2 8.5.1 5.2 5.3 8.4 6.2 6.3 6.4 Choosing your favourite channels __16 Recording programmes __________16 Information about subscription and postbox ______________________18 Informations bars (Info) _________19 The bottom bar ________________19 The top bar ___________________19 Electronical programme guide (EPG) _________________________20 List of the programmes __________20 Films, sports, youth, documentaries and other kinds of programmes ___21 Selecting programmes ___________22 List of selected programmes ______22

CONTENTS 1

11.1 11.2 11.3 English 11.4 11.5 12
Radio channels _________________23 The channels ___________________24 List of the channels _____________24 Altering the numbering of the channels ______________________24 Adding new channels ____________25 Removing channels ______________25 Reinstalling channels _____________25 Subscription programmes (not yet available) ______________________26 Information for subscribers (not yet available) ______________________26 Troubleshooting ________________27 Technical specifications _________29 More on your remote control ____30 TV mode (TV) _________________31 VCR and DVD mode (VCR, DVD) _32 Amplifier/Tuner mode (AMP) ______33

SCART (1) socket to connect your video recorder. Left/Right audio-cinch outputs to connect your HIFI / Audio receiver system. Socket for satellite dish.
1) SCART is also called Euroconnector or Peritel. (*): SELV: Safety Extra Low Voltage. (**): HV: Hazardous Voltage.

PRODUCT DESCRIPTION 5

English

2.3 The remote control

SATELLITE MODE (SAT)
Detailed information about a programme or selection of language and/or subtitling.

Standby B On/Off button.

INFO To display on screen an information bar with information about the programme.
A, B, C, D, E: Function buttons.
MENU To reach the main menu.
EPG ELECTRONICAL PROGRAMME GUIDE with information about the programmes.
OK Button to confirm your selection. CBVW Buttons to select the menus, programmes or to adjust the volume.
EXIT To return to a TV programme.
SERV Information about your subscription.
Adjusts the TV volume. PREF To switch your favourite channels on and off.

c Mute/demute the sound.

TV/SAT Switch between watching from digital receiver or directly from the TV cable.

6 PRODUCT DESCRIPTION

Your 5 in 1 Remote Control enables you to control most of your Audio/Video Equipment through various modes: satellite receiver, TV, VCR, DVD and Amplifier Tuner. Pressing the MODE button once will remind you of the MODE you are in through blinking lights: left for SAT, middle for TV, right for VCR, left/middle for DVD, middle/right for Amp/Turner. To set the MODE, press the MODE button several times until the desired mode is reached. The sequence is: SAT->TV>VCR->DVD->Amp/Tuner. At every keypress, lights blink to indicate in which MODE you are in. Note: some keys are shortcut keys to other MODES. In this case, the lights do not indicate the current MODE! (e.g. if you are in VCR MODE, pressing the volume keys will light the TV/middle indicator). Chapter 16 gives you all the information about the functions available in TV, VCR, DVD and Amp/Tuner modes as well as instructions on how to setup you remote control for your different audio-video appliances.
Remove the battery cover. Insert the two batteries (type LR6/AA 1.5 V) supplied. Position them as shown in the diagram, in the battery compartment. Replace the cover.

INSTELLINGEN

Altering the volume, subtitling, spoken language, length of time the information bar remains on the screen, the reminder and the time. Altering the TV and VCR standard settings.

TECHNISCHE INFORMATIE

1 SIGNAALSTERKTE
Checking the LNB installations and setting the aerial. Consulting the decoder and software version.

2 DECODERVERSIE

10 M E N U S T R U C T U R E
5 Installing the satellite receiver
How to install your satellite receiver:
1 Turn on your TV. 2 When you power on the box, the front LED will blink
once and switch off. The Menu screen will then appear. Make sure your smart card is inserted in the slot, the chip facing upwards. Now, you can only access options 4,5 and 7. If the MENU screen doesn't appear after you have switched on the receiver, then press the TV/SAT button on your remote control twice. Note: Generally, when you don't have any screen after having connected you, press the TV/SAT button twice on your remote.
3 Execute the following three steps to install the receiver:

Step 1 Step 2 Step 3

INSTELLINGEN (Button 4) TECHNISCHE INFORMATIE (Button 7) KANALEEN INSTALLEREN (Button 5)

Installation

Installation of the decoder
You access the menu by pressing the MENU button. To choose one of the options in the MENU you can press one of the selected numbers or you can select the option with the arrows. Press OK to confirm your choice. Choose option 4 in the menu (INSTELLINGEN) and then 1 (INSTELLEN DECODER). With this MENU, you can select your favourite installation for your satellite receiver. Select the number to of the function you've chosen or use the buttons make your selection. The possible options appear when you press the arrows. 5.1.1.1 Preferred language You can choose between English, Dutch, Spanish, French, German, Italian or the original version. This option can only be selected if the programme is also subtitled with the selected language. 5.1.1.2 Subtitling You can choose between English, Dutch, Spanish, French, German, Italian or without subtitling. This option can only be selected if the programme is broadcast in the selected language. I N S TA L L I N G T H E S AT E L L I T E R E C E I V E R 11
A TERUG NAAR MENU 4.1 INSTELLEN DECODER
5.1.1.3 Sound With this option, you choose the standard level of the volume. When you watch a programme, you can adjust the volume with the buttons. 5.1.1.4 Duration of the information bar With this option, you choose how long the bar with the name and the number of the selected channel must remain on the screen. You can choose a normal or long time or no bar. English

4.2 INSTELLEN TV EN VIDEORECORDER 1 BEELDFORMAAT TV 2 GELUID TV 3 SIGNAAL TV 4 GELUID VIDEORECORDER 5 NORM VIDEORECORDER 4/3 (STANDAARD) STEREO CVBS STEREO PAL A TERUG NAAR MENU
5.1.1.5 Reminder/Alarm It indicates automatically when a programme you have chosen starts. You can choose a reminder for video and audio or for video only. 5.1.1.6 Setting the time The right date and time will be set automatically in the satellite receiver once the installation has been completed. But you can also set the time manually. To do so, press the B button. Then press the A button twice to return to the main menu.
Installation of the TV / Videorecorder
Choose option 4 (INSTELLINGEN) in the menu and then option 2 (INSTELLEN TV EN VIDEORECORDER). Here you have the possibility of making the optimum installations for your TV and VCR. To go from one option to another one, press the number of the option you have chosen or press the buttons on the remote control. To choose one of the various possibilities, you can press the buttons.

1 BEELDFORMAAT TV 4 5

: 4/3 standard or 16/9 large frame GELUID TV : stereo or mono SIGNAAL TV : we advise you to switch it to RGB GELUID VIDEORECORDER : stereo or mono NORM VIDEORECORDER : we advise you to keep it on PAL When you have selected the installations you wanted, you may press on the A button to return to the INSTELLINGEN screen.
12 I N S TA L L I N G T H E S AT E L L I T E R E C E I V E R

Technical information

Installation of the dish
SATELLIET : ASTRA 1G SCHOTELNUMMER : 1 BAND : KU FREQUENTIE : 12.515 Ghz LO LNB : 10600 Mhz POLARISATIE : Horizontal Schakeling (22Khz) : Yes If you use another satellite, in the section SATELLIET you can select "OVERIGE" and enter the necessary parameters. Check in every case the LO and LNB values. You will find them in the manual for the dish aerial or on the sticker of the LNB. Contact the dealer who supplied you with the dish if you don't find these values. Once the right parameters have been installed, you can begin installing the channels.
Positioning the satellite dish
We advise you to have the dish installed by a professional with suitable measuring devices. 1 Return to the screen SIGNAALSTERKTE (Press B). 2 Select VOEDINGSSPANNING LNB with the help of the arrows. JA (Yes) if you have one satellite dish. NEE (No) if you have connected several dishes up to your decoder. In that case, please contact your dealer. 3 Put the dish in direction 19,2 East of the ASTRA satellite position. 4 On the screen, you will see a receivingsindicator which indicates the quality and strength of the reception. The length of the bar indicates the strength and the colour the quality. Position the dish as well as possible: the bar must be as long as possible. If the signal quality is green and reaches almost 3, the strength of the signal is acceptable. You may fix the dish in this position. I N S TA L L I N G T H E S AT E L L I T E R E C E I V E R 13

16 T H E M E N U

Recording a programme that must be broadcast later
You first have to preselect your videorecorder on the decoder. Then you will have to program your digital receiver so that it will switch on at the right time and on the right channel. You can program the receiver from the MENU (MENU button) or from the EPG (EPG-button). MENU button Press MENU and 1, and then press the number of the programme. Choose a sequential number for the recording. This number is not important: you can begin with 1, than choose 2, 3, 4, etc. Now select the date, the number of the channel, the start and finish times and the frequency of the recording daily, weekly or monthly. Follow then the instructions that appear on the screen. WARNING! - If there is a parental lock on the channel you wish to select, you first have to enter your pincode. - Do not forget to switch on your videorecorder before recording the programme. - You can record maximum eight programmes. English
1 PROGRAMMA S OPNEMEN PROGRAMMA 1
Recording a programme from the electronical programme guide (EPG)
You can only record the channels from the electronical programme guide if you have a subscription. You can do it as following: - Press EPG - Select PROGRAMMA-OVERZICHT - Choose the programme you want to record and confirm your choice by pressing the OK button. WARNING! When you choose a programme which has already begun, you cannot record it: you can only watch it. Follow the instructions appearing on the screen to program the record. If you want to record at a time which has already been selected, you will be informed of this. Set the videorecorder on the preselection for the decoder. Do not forget to switch on your videorecorder too. T H E M E N U 17

Recording indications

If the receiver is set on standby, it will automatically switch on on the channel and the time at which you want to record. If you're watching another channel than this that you want to record, you'll have a reminder. - When you press +, a message appears to set the channels you want to record. - When you press OK, the decoder will be set on the channel you want to record. WARNING! If during the recording you flick to another channel, the recording will be lost.
6.1 GELDIGHEIDSDUUR ABONNEMENT ONTVANGSTRECHTEN TOT CANAL DIGITAAL 30 SEP 98 CANAL+ 30 SEP 98
Information about subscription and postbox
Button 6 of the MAIN MENU With this option, you can see:
The period of validity of your subscription
Press MENU, than 6 and 1. The reception rights of your subscription are automatically extended monthly. In this section, you can check whether your subscription has indeed been extended. But you can't see here the date until which your subscription is valid. Therefore, you must consult your subscription form. We advise you to always keep your smart card in the receiver so that your subscription can be extended automatically every month.

Postbox

Maybe you have a subscription for a channel that can send you messages. Press MENU and then 6 and 2 or use the arrow buttons and confirm then by pressing the OK button. To leave the MENU, press again the MENU button or TERUG.

18 T H E M E N U

7 Informations bars (Info)
INFO button When you press the INFO button while watching a programme, information bars will appear on the screen. On these bars, you will find information about the programmes that are being broadcast at that time and information about the programmes that follow. When you press the INFO button, two bars appear on the TV-screen, one at the top and one on the bottom of the screen. To see what programme is currently being broadcast on another channel: - Press the number of a channel or select the channel with the arrow buttons and press the OK button. WARNING! - If you have already used the VOORK button, you can only use the INFO button for your favourite channels. - If the channel you have chosen is locked, you will have to enter your pincode. - To see all the channels once more, press the VOORK button again. - To leave INFO, press again the INFO button or TERUG. English

7.1 The bottom bar

On this bar, you will see the number and the name of the channel you are watching, as well as the time.

7.2 The top bar

On this bar, you will find information about the programmes and further information about the channel you are watching. This information is given with symbols. Here you will find the name and the number of the channel, the title and type of programme you are watching, the time of start and finish of the programme and technical information (stereo sound, format). To see all the programmes which are broadcast at the same moment: - Press the arrow buttons to select the channel or press directly the number of the channel you are interested in. The top bar changes whilst the bottom bar and the picture you are looking at remain the same. To see the following programme on the channel: - Press the button. Now you can see what will be broadcast later.
I N F O R M AT I O N S B A R S 19
8 Electronical programme guide (EPG)
EPG button The electronical programme guide (EPG) gives you information about all the programmes that will be broadcast next week. With EPG you can look for programmes very easily. With the EPG button, you can access the following options: PROGRAMMA OVERZICHT: The programmes are listed in the order of their broadcasting per channel. FILM, SPORT, JEUGD, DOCUMENTAIRES EN OVERIGE GENRES: The programmes are listed per theme (movies, sports, youth, documentaries and other kinds of programmes). SELECTEREN PROGRAMMA'S: Here you can make selections to look for your favourite programmes. The programmes you've selected are stored in the memory. LIJST GESELECTEERDE PROGRAMMA'S: a list with all the programmes you have selected and want to see or record. To leave the ELECTRONICAL PROGRAMME GUIDE, press EPG or TERUG. Note: It can happen that the EPG is not completely updated with the actual information. Because of the actual regulation concerning the copyrights of programmes of the broadcasters Nederland 1-2-3, Canal + is limited in the broadcast of the Electronical Programme Guide.

8.1 List of the programmes
Here you find all the programmes in chronological order. You can consult all the programmes up to one week ahead.
8.1.1 Choosing a programme
When you want to watch a programme, you can select it with the arrow buttons or and than you can press the OK button in order to: - know if a programme is being broadcast at that moment, - store a programme which is being broadcast later in the memory, - delete a programme which has been stored in the memory, - request a programme you have to pay for.This function will only be available at a later date, - record a programme or cancel a recording.
8.1.2 Programmes broadcast on other days
When you want to look for a programme which is broadcast on a given day in the EPG, you can perform the following operation: - to select the day: - Press the button corresponding to the selected day of the week (MA, DI,.) and go directly to the time (morning) from 6:00 to 14:00. - For afternoon programmes between 14:00 and 20:00 press the DAG button. - For evening programmes between 20:00 and 24:00 press the AVOND button. - For night programmes between 00:00 and 6:00 press the NACHT button.
20 E L E C T R O N I C A L P R O G R A M M E G U I D E
+ button When you press the + button, you will get detailed information about the selected programmes (summary of the programme, actors, presentators, directors, producers,.).
8.2 Films, sports, youth, documentaries and other kinds of programmes
Here you find all the programme which are selected according to the various kinds: films, sports, programmes for young people and other kinds of programmes in chronological order. You can search for the programmes up to one week ahead. When you choose ANDERE GENRES (with the arrow buttons or OK ), you will see the following list: - Series - News magazines (Infomagazine) - Entertainment - Music (Muziek) - Weather forecast (Weerbericht) - Events (Evenement) - Others (Overige)
When you press PROGRAMMA OVERZICHT and then B, you can choose a programme on the basis of the channel and the starting time. When you press OK, the EPG will look for the corresponding programme. Then you may store this channel in the LIJST GESELECTEERDE PROGRAMMA'S.

8.1.4 Reminder

The receiver will warn you when a progamme you have entered in the LIJST GESELECTEERDE PROGRAMMA'S is going to start. You can install the warning signal via the MENU. Press MENU and then 4 and 1. A few minutes before the beginning of the programme, you will be warned. In HERINNERING you can choose: - audio: the decoder will utter a BEEP. - None. When you press the + button, the name of the programme you have stored in the memory will appear. WARNING! - When a programme which has been stored is broadcast, it will be automatically erased from the memory. - A maximum of 8 programmes can be stored in the memory. - A programme which has been stored is indicated in the EPG or INFO with a symbol.

Altering the numbering of the channels
During the installation, you have chosen the order of CANALDIGITAAL or a random order. You may alter the order: - if you have determined your own numbering, you may alter the complete numbering of the channels (from 1 up to 500). - if you have chosen the numbering of CANALDIGITAAL, you may only alter the numbering of the channels which are not CANALDIGITAAL channels. You can access this function via the menu KANALEN INSTALLEREN: - press MENU and then 5. - then choose option 2 (KANALEN HERNUMMEREN). With the arrow buttons , you can consult the list of the channels. You may also go directly to the channel you are interested in by pressing the number of the channel. You may select a channel and press the OK button. Then you can move the channel with the help of the arrow buttons. You confirm the new position with the OK button. Now you can choose to put this channel before or after this new position or to exchange it with the new position.

24 T H E C H A N N E L S

11.3 Adding new channels
It can happen that new digital channels are launched. You may add these new channels in the memory of your decoder. You may add new channels with the menu KANALEN INSTALLEREN: - press MENU and 5. - choose then option 3 (KANALEN TOEVOEGEN). On this moment, the decoder will start searching automatically. A progress display will appear on the screen.when the search is complete, you will find the new channels in the LIJST VAN KANALEN.
11.5 Reinstalling channels
During the installation, you had to choose between the numbering of CANALDIGITAAL or a random numbering. This option gives you the possibility to go from one type of numbering to another one. English press MENU and then 5. choose then option 5 (KANALEN INSTALLEREN). Press OK so that the display KANALEN INSTALLEREN appears. The system warns that the complete list of channels can be altered and that you have to enter your CODE to access this menu. now you may choose again between both kinds of numberings of the channels.

11.4 Removing channels

You may also remove channels which are stored in the memory with the help of the menu KANALEN INSTALLEREN: - press MENU and then 5. - choose then option 4 (KANALEN VERWIJDEREN). A list of channels you may remove appears on the screen. You may select the channel with the arrow buttons. Then you can remove the channel by pressing OK. The channel which has been removed will be restored in the memory by installing the channels once again.

T H E C H A N N E L S 25

12 Subscription programmes

(not yet available)

When this manual was being printed, subscription programmes were not yet available. You will be informed when these services will be available.
13 Information for subscribers

The SCART connection has been made wrong. The connections are right, but the television is NOT connected up to the extern AV source (AV 1 or EXT. 1, etc.). The cable connections are maybe faulty (damaged, broken or squashed) are missing.
Check all your connections and consult chapter 2.
Only the main menu and the corresponding sub-menus are available. You cannot choose a service.
There is no download list of the (digital) services in the memory of the receiver. The receiver has not been well connected up to the dish.
Execute all the relevant steps for installing indicated in chapter 4. Check all the items of the menu Antenne instellen (LNB, mains, LNB-type, LO frequence,.) consult chapter 4.2 A. Check the installation and the positioning of the dish. Check the cable connection between the LNB and the satellite receiver. Check the installation and the positioning of the dish. It may be due (rarely) to severe or very cloudy weather.
Main menu + sub-menus and information are available. But there is no reception (the screen remains black).
The dish does not receive satellite signals. The mains of the LNB is interrupted. The received signal is too weak.
T R O U B L E S H O O T I N G 27

The dish is damaged.

Install a new dish. Check all the connections and cables. Reposition the dish. Fix your dish strongly.
Irregular reception, "mosaic" effect of the picture.
Wrong cable connections (damaged, broken or squashed connectors or wires). A weak signal because the dish is not well positioned or is not stable.
English The remote control does not operate. By normal receiving, you may have a black screen when you choose some services. 28 T R O U B L E S H O O T I N G
There are no batteries in the remote control, the batteries are nearby or completely used. Your subscription is not valid for the selected service or programme.
Check the batteries and change them eventually.

Choose another service.

16 Technical specifications
This product is in conformity with the requirements of the 95/47/EC and 2002/21/EC directives. Video decoding - MPEG-2 DVB compliant up to MP@ ML - Video bit rate: up to 15 Mbit/sec - Video format: 4 :3 and 16 :9 - Resolution: up to 720x576 pixels Audio decoding - MPEG layer I / II (excluding multi-channel management from one bitstream) Ease of Installation - Automatic program installation via scanning - Automatic program list update - Program editing for personalised installation Ease of Use Zaplist Favourite mode Full remote controlled Automatic recording by tagging via EPG Application system resources Processor clock speed 166 MHz SDRAM-CPU/Video-Graphics 8 MB Flash memory 8 MB Satellite antenna interface RF input: IEC169-24F LNB supply: 0 / 14 / 18V LNB current: 350 mA max Tone switching: 22 kHz (on / off) Tone burst for 2 orbital position Accessories Remote control: RC2585102/01 Scart cable Instruction for use Batteries: 2 x 1.5V type AA/LR6 Mains cord (2 m)

30 YO U R R E M O T E C O N T R O L

17.1 TV mode (TV)

Red (A), Green (B), Yellow (C), Blue (D), White (E) teletext keys.
b Teletext on/off. +/OSD Access or remove on screen display. a Toggles between teletext and TV mode. English
MENU Opens the menu function
P+/PSelects the next/previous programme. CBVW Moves the cursor left/right/up/down. OK Acknowledges a menu item selection.

Exits the menu function.

4 Selects between first or second sound channel.
P<P Switches to the last viewed channel.
Adjusts the TV volume. 0-9 Selects the programme in TV mode Selects item setting in menu mode.
Selects the TV set modes (TV, AV1, AV2,etc.).
Selects the TV picture format (16/9, 4/3, etc.).
Note: Some of the functions described below may not be available or may not have the same behaviour for all equipment.
YO U R R E M O T E C O N T R O L 31
17.2 VCR and DVD mode (VCR, DVD)
(A) G (B) K (C) L (D) B (E) F English
: fast rewind : pause : stop : play : fast forward
+/OSD access or remove on screen display.
b Displays sub-titles. MENU Opens the menu function. P+/PSelects the next/previous programme/title. CBVW Moves the cursor left / right / up / down. OK Executes the menu function selected by the cursor.
Exits the menu Function. 4 Selects, when available, an alternate audio track (e.g.: language).
Changes, when available, the view angle. 0-9 VCR - Selects the programme. DVD - Selects the chapter/title.
Adjusts the TV volume. c Mutes the TV. Selects the TV picture format (16/9, 4/3, etc.).
Selects the VCR modes (VCR, AUX1, AUX2, etc.).
32 YO U R R E M O T E C O N T R O L
17.3 Amplifier/Tuner mode (AMP)
C* Searches/Scans the previous radio programme.
* Exits the menu function.
Adjusts the Amplifier/Tuner volume.
B* Searches/Scans the next radio programme.
c Mutes the Amplifier/Tuner. * Selects the external source of the Amplifier.
* Changes the sound effect.
Selects the TV picture format (16/9, 4,3, etc.).
* Only available for philips products.
YO U R R E M O T E C O N T R O L 33
P+/P-* Selects the next/previous radio programme.
ABCDE* Selects Tuner source.
Instelling van de afstandsbediening Setting up your remote control
Alle fabrikanten hechten veel belang aan de voortdurende verbetering van hun producten. Ofschoon de RC2585100/RC2585102 met de meeste toestellen uit de onderstaande lijst compatibel is, kan Philips niet garanderen dat u hem met alle producten die op de markt verkrijgbaar zijn kunt gebruiken All manufacturers are concerned about the constant improvement of their products. Although the RC2585100/RC2585102 is compatible with most of the equipment of the following list, Philips cannot guarantee its operation with the complete range of products on the market. INSTELCODES VOOR VERSTERKERS (AMP) SETUP CODES FOR AMPLIFIERS (AMP) Arcam Bush Curtis Mathes Goodmans JBL Optimus Philips Pioneer Sansui Videologic Yamaha 0668 0448, 0448, 0874 0695, 0668 0040, 1206 0381, 0170, 0875 Phonotrend Pioneer Sanyo Sherwood Sony Technics Thomson Thorens Universum Yamaha 0529 0041, 0107, 0316, 0529, 0518 1285, 1085, 1185 0235, 1545, 1335, 0203

Stern Strato Stylandia Sunkai Sunstar Sunwood SuperTech Superla Supra Susumu Sysline Sytong T+A TVTEXT 95 Tandberg Tandy Tashiko Tatung Tec Technics Teleavia Telefunken Telegazi Telemeister Telesonic Telestar Teletech Teleton Televideon Temco Tennessee Tensai Texet Thomson Thorn Tokai Tomashi Toshiba Trans Continens Trident
0233, 0286, 0190, 0291, 0438 0064, 0637, 0321, 0382, 0482 0064, 0036, 0036, 0064, 0394 0190, 0245, 0099, 0244, 0120 0244, 0063, 0190, 0243 0543, 0099, 0064, 0244, 0038 0244, 0286, 0274, 0364, 0223 0128, 0136, 0289, 0362, 0652, 0064, 0101, 0223, 0064, 0606 0064, 0036, 0364 0233, 0063, 0244, 0398, 0401, 0064, 0036, 0244, 0131, 0321, 0404, 0132, 0245, 0274 0243, 0036, 0245, 0401 0136, 0223, 0362, 0225, 0652, 0064 0265, 0064, 0101, 0131, 0362, 0099, 0401, 0539 0190, 0064, 0364, 0535, 0063, 0097, 0129, 0136, 0543 S E T U P C O D E 39
Tristar Triumph Tsoschi Uher
0245 0373, 0543, 0233, 0513, 0064, 0401, 0445 Ultravox 0064, 0129, 0243, 0114, 0274 Unic Line 0064, 0500 United 0064 Universum 0064, 0132, 0131, 0354, 0097, 0373, 0539, 0038, 0244, 0274, 0063, 0438, 0507, 0037, 0291, 0036, 0317, 0397, 0445, 0197, 0321, 0364 Univox 0064, 0114, 0190, 0265, 0364 Vestel 0064, 0244 Videologic 0245, 0243 Videosat 0274 Videotechnic 0244 Vision 0244 Vistar 0233 Voxson 0114, 0190, 0445 Waltham 0064, 0445, 0136, 0244 Watson 0064, 0606, 0036, 0245, 0421, 0546 Watt Radio 0129, 0243 Wega 0063, 0114, 0064 Wegavox 0036 White Westinghouse 0243, 0064, 0364 Windstar 0309 Xrypton 0064 Yamishi 0482, 0244, 0309 Yokan 0064 Yoko 0244, 0291, 0036, 0064, 0245, 0366 Zanussi 0233, 0244 Zeno 0366 sinu 0129 INSTELCODES VOOR VIDEORECORDERS SETUP CODES FOR VCR ASA AVP Adelsound Adventura Adyson Aiwa 0108, 0099 0334, 0027, 0064, 0379, 0375
Akai Akiba Akura Alba Allstar Ambassador Amstrad Anitech Ansonic Aristona Asha Asuka AudioTon Audiosonic Baird Bang & Olufsen Basic Line Beaumark Bestar Blaupunkt Blue Sky Bondstec Brandt Brandt Electronic Bush CGE Calix Carrefour Cathay Catron Cimline Cineral Citizen Clatronic Colt Combitech Condor Craig Crown Cybernex Cyrus Daewoo Dansai De Graaf Decca Denon
0342, 0133, 0068, 0099 0099, 0047, 0027, 0305, 0379, 0342, 0047 0027, 0352, 0099, 0068, 0131, 0305, 0047, 0305 0253, 0222, 0108, 0061, 0047, 0099 0068, 0347, 0520, 0348, 0099, 0342, 0379, 0305, 0305, 0047, 0305 0064, 0099, 0074 0047, 0305, 0108 0305, 0047, 0669 0099, 0305 0108, 0075, 0069, 0131, 0193 0027, 0035, 0094, 0108 0069

0064 0131, 0064, 0027, 0075, 0089 0068, 0411 0064, 0099, 0267, 0099, 0305, 0267 0031, 0108 0068, 0347, 0411, 0348, 0233, 0521, 0234 0031, 0375 0131, 0133, 0070 0267, 0068, 0094, 0027, 0131, 0074, 0075, 0267 0379, 0267, 0305 0131, 0133, 0027, 0068 0108, 0027, 0064, 0069, 0305, 0099, 0069, 0064, 0027, 0074, 0131 0068, 0047, 0411, 0047, 0099 0075, 0089 0099, 0131, 0108, 0222, 0064, 0064 0072, 0099 0031, 0064, 0305 0059, 0061, 0060, 0133, 0027, 0375 0027

42 S E T U P C O D E

Suntronic Sunwood Supra Sylvania Symphonic TMK Taisho Tandberg Tashiko Tatung Teac Tec Tech Line Technics Teleavia Telefunken Teletech Tenosal Tensai Thom Thomas Thomson Thorn Tokai Toshiba Totevision Uher Ultravox Unitech Universum Vector Video Concepts Wards Watson XR-1000 Yamaha Yamishi Yokan Yoko Zenith
0027, 0267, 0064, 0108, 0075 0027, 0108, 0075, 0068, 0070 0068, 0027 0047, 0099, 0253 0068, 0520 0068, 0347, 0348, 0520, 0411, 0521, 0099 0099, 0031, 0027 0068, 0347, 0348, 0411, 0521, 0305, 0555, 0094, 0520 0064, 0068, 0072, 0068, 0411, 0070, 0267 0108, 0027, 0375, 0064, 0133, 0267, 0222, 0072 0075, 0027, 0099, 0267, 0047 0061, 0060, 0027
INSTELCODES VOOR DIGITAL VIDEO DISC SETUP CODES FOR DIGITAL VIDEO DISC Akai Bush Cyber Home Denon DiViDo Grundig JMB JVC Kenwood LG Lecson Magnavox Oritron Panasonic Philips Pionee Proline Samsung Sharp Sony Technics Thomson Toshiba Universum Wesder Wharfedale Yamakawa Zenith 0722 0650, 0585 0517, 0566, 0530 0552, 0530

S E T U P C O D E 43

DSR 2210 - 5143 2