DVD-Video Player / Video Cassette Recorder

DVD755VR/00

Read this manual rst!
Congratulations on purchasing this Philips product. Weve included everything you need to get started. If you have any problems, Philips representatives can help you get the most from your new product by explaining: Hookups, First time setup, and Operation.
For fast help, call us rst! Tel: see back page of this manual
Owners Manual Manuel de lutilisateur Bedienungsanleitung Gebruiksaanwijzingen Manual del usuario
Safety Precautions CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
Notes on copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. SERIAL NUMBER:The serial number is found on the back of this unit.This number is unique to this unit and not available to others.You should record requested information here and retain this guide as a permanent record of your purchase. Model No. ___________________________________ Serial No. ___________________________________
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or similar unit.
Features: Complete versatility to play DVD,VCDs, audio CDs or VHS Tapes. Watch a DVD while recording a TV show to the VCR. Remote controls DVD and VCR decks. Records from DVD to VHS (unless DVD is copy protected with Macrovision). Hi-Fi Stereo VCR.
CAUTION: This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owners manual carefully and retain for future reference, should the unit require maintenance, contact an authorized service location-see service procedure. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus shall not be exposed to water, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.
Index English Espaol Nederlands Deutsch Franais

English.. 4

Franais..39

Deutsch..75

Nederlands..111

About the symbols for instructions
Indicates hazards likely to cause harm to the unit itself or other material damage. Indicates special operating features of this unit. Indicates tips and hints for making the task easier.

Before Use

Title (DVD only) The main film content or accompanying feature content or additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily. Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enable you to locate the chapter you want. Depending on the disc, no chapters may be recorded. Track (Video CD and audio CD only) Sections of a picture or a musical piece on a video CD or an audio CD. Each track is assigned a track number, enabling you to locate the track you want. Scene On a video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called Scenes. Each scene is displayed in the menu screen and assigned a scene number, enabling you to locate the scene you want. A scene is composed of one or several tracks. Types of video CDs There are two types of video CDs: Video CDs equipped with PBC (Version 2.0) PBC (Playback control) functions allow you to interact with the system via menus, search functions, or other typical computer-like operations. Moreover, still pictures of high resolution can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC.
DVD (8 cm / 12 cm disc) Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit can play a DVD-R, DVDRW, Kodak PICTURE CD, SVCD, and CD-R or CD-RW that contains audio titles, MP3 or JPEG files. Notes Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-R/RW) disc itself, some CD-R/RW (or DVD-R/RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregular shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions.
Notes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available, or other functions may be added. Refer also to the instructions applied with the DVDs and Video CDs. Some DVDs made for business purposes may not be played on the unit. Regional code of the DVD player and DVDs This DVD player is designed and manufactured for playback of region 2 encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs.This unit can play only DVD discs labeled 2 or ALL. If you try to play any other discs, the message Check Regional Code will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area limits.

A B ALL MP3 VCD DVD ST BIL PR SP LP PROG. TITLE CHP/TRK VCR TIMER

CDREC HI-FI

DVD DVD inserted. VCD Video CD inserted CD Audio CD inserted.
PR DVD+VCR is tuned to Channel XX. BIL Indicates when a BILINGUAL broadcast is being received. ST Indicates a stereo broadcast is being received. Indicates total playing time, elapsed time, or current deck status (Playback, Pause, etc). SP LP Displays the recording and playback speed.
A cassette is in the VCR deck.

SOURCE DVD/VCR Selector

Display window Shows the current status of the unit.

Remote Control

DVD/VCR select button Select the output source (DVD or VCR) to view on the TV screen. TV/VCR To view channels selected by the VCR tuner or by the TV tuner. 0-9 numerical buttons Selects numbered options in a menu.
POWER Switches DVD+VCR ON and OFF. EJECT, OPEN/CLOSE - Opens and closes the disc tray. - Ejects the tape in the VCR deck. RETURN Removes the setup menu. DISPLAY Accesses On-Screen display. Switches among the clock, tape counter and tape remaining modes. b/B/v/V (left/right/up/down) - Selects an option in the menu - v/V: Selects channel of VCR. Adjusts manually the tapes picture onscreen. OK - Acknowledges menu selection. - Displays functions on the TV screen. STOP Stops playback. PLAY Starts playback. PAUSE/STEP Pause playback or recording Press repeatedly for frame-by-frame playback during pause. SUBTITLE Selects a subtitle language. AUDIO Selects an audio language (DVD) or an audio channel (CD). ANGLE Selects a DVD camera angle if available. ZOOM Enlarges DVD/VCD video image. TITLE/LP - Displays the discs Title menu, if available. - Selects recording speed SHUFFLE - Plays tracks in random order. C.LOCK Switch the Child Lock on and off. SHOWVIEW To display the programme menu for ShowView programming.
DISC MENU Accesses menu on a DVD disc. SYSTEM MENU Accesses or removes DVD setup menu and VCR menu. SKIP./REW Skip to beginning of current chapter or track, press twice in quick successions to go to previous chapter or track. Press and hold button for about two seconds to search backward. (For DVD only) Rewinds the tape during the STOP mode or for fast reverse picture search. SKIP > /FWD Skip to next chapter or track. Press and hold button for about two seconds to search forward.(For DVD only) Advances the tape during the STOP mode or for fast forward picture search. MARKER Marks any point during playback. SEARCH Displays MARKER SEARCH menu. INPUT To select the VCR decks source (Tuner, AV1, AV2 or AV3). REC/ITR Records normally or activates Instant Timer Recording with repeated presses. REPEAT Repeat chapter, track, title, all. REPEAT A-B Repeats sequence. PROGRAM Accesses or removes Program menu. CLEAR - Resets tape counter to M 0:00:00 - Removes a track number on the program menu or a mark on the MARKER SEARCH menu.

TV/VCR

VCR OPEN/CLOSE

RETURN

DISPLAY

SYSTEM

PAUSE/STEP
MARKER SEARCH INPUT REC/ITR

SUBTITLE AUDIO

REPEAT REPEAT PROGRAM CLEAR A-B TITLE SHUFFLE C.LOCK SHOW VIEW

VIDEO PLUS

Note This remote control use the same buttons for VCR and DVD functions (ex. PLAY). When using a VCR, first press the VCR button. When using a DVD, first press the DVD button.

Rear Panel English

AUDIO OUT (Left/Right) (DVD OUT) Connect to an amplifier, receiver or stereo system.
DVD EXCLUSIVE OUT AUDIO OUT
AERIAL Connect the aerial using this jack. EURO AV2 DECODER Connect to pay-TV decoder or another video recorder. DVD/VCR AUDIO OUT Connect to an amplifier, receiver or stereo system.

VCR IN+OUT/DVD OUT

AERIAL

DVD/VCR AUDIO OUT

EURO AV2 DECODER

RF OUT

EURO AV1 AUDIO/ VIDEO

DVD/VCR OUT COAXIAL

COAXIAL (Digital audio out jack) (DVD OUT) Connect to digital (coaxial) audio equipment. EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT) Connect to your TV set or another video recorder.
RF OUT (DVD/VCR OUT) Connect to your TV using this jack. Mains lead Connect to a power source.
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

Connections English

Tips q Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. q Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. q For better sound reproduction, connect this units AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See Connecting to optional equipment on page 11. Caution Make sure this unit is connected directly to the TV. Set the TV to the correct video input channel. Do not connect this units AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Connecting to a TV & Decoder
q Make one of the following connections, depending on the capabilities of your existing equipment. Basic connection (AV) Connect the EURO AV1 AUDIO/VIDEO on the rear panel of this unit to the SCART input socket on the TV using a SCART lead.
encoded 2 Some TV broadcasters transmitpurchased television signals which you can only see with a or rented decoder.You can connect such a decoder (descrambler) to the DVD+VCR. Basic connection (RF) Connect the RF antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of this unit.
AERIAL DVD/VCR AUDIO OUT DVD EXCLUSIVE OUT AUDIO OUT
1 supplied RF antenna cable from 2 Connect the OUT) jack on the rear panel ofthe RF OUT (DVD/VCR this unit to

when 4 Searchingtowill stopMFT. it locates a stations. Press 2 select Control the fine tuning of the station by using 3 or 4.

C10 --------

00 --------
WDR 3 ----------------------------, OK i
Tuning in TV Stations Manually
PressTV to select STATION so that you may name your station.
Before Operation - VCR part Changing the order of TV Stations
After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them again.The instructions given on this page will show you how you can simply move them into your desired order. Press SYSTEM MENU. The main menu will appear on the TV screen. Press 1 or 2 to select the PR SET. Press OK.

Deleting TV Stations

After tuning TV stations into your VCR you may wish to delete a station. The instructions given on this page will show you how you can easily delete any unwanted TV stations.
Press SYSTEM MENU. The main menu will appear on the TV screen. Use 1 or 2 to select the PR SET. Press OK.

f OSD ON AUDIO OFF

ON AUDIO OFF 16:9 4:3

STATION PR-01

Press SYSTEM MENU. Use 3 or 4 to select the programme number you want to move (for example, PR 03). Press 2.
Press SYSTEM MENU. Press 3 or 4 to select the programme number you want to delete. (for example, PR 03)
C02 C03 C05 C06 C04 C07 C08 C00
Press 1. After a short while, the selected station will be deleted.
Use 3 or 4 to select the programme number you want to move to (for example, PR 05).
C02 C03 C05 C06 C04 C07 C08 C09
PR-01 PR-02 PR-04 PR-05 PR-03 PR-06 PR-07 PR-08
Press SYSTEM MENU to remove the menus from the TV screen. If you wish to delete other TV stations repeat stages 1 3.
Press OK. The selected programme will be moved to the new programme number. If you wish to move other TV stations repeat stages 1 - 4. Press SYSTEM MENU to remove the menus from the TV screen.
How to select Stored TV stations: Stored TV stations can be selected in either of two ways. Use 3 or 4 to select different stations that are tuned into your DVD+VCR. You may also directly select stations using the numbered buttons on the remote control.
Before Operation - DVD part
This manual gives the basic instructions for operating the DVD+VCR. Some DVDs require specific operation or allow only limited operation during playback.When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD+VCR or is not available on the disc. On-Screen Display The general playback status can be displayed on the TV screen. Some options can be changed on the menu. On-screen display operation Press DISPLAY during playback.

Press SYSTEM MENU. The setup menu appears.
Picture TV Aspect DVD 4:3 Letterbox: Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. 4:3 Panscan: Select when a conventional TV set is connected.The video material formatted in the Pan & Scan style is played back in that style (Both sides of the picture are cut off.) 16:9 Wide: Select when a 16:9 wide TV is connected.
Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language
4:3 Letterbox 4:3 Panscan 16:9 Wide
Use v/V select item. 2 The screentowill showthe desired setting for the selected the current option, as well as alternate setting(s). While the desired 3 then v/V to select option is selected, press B, the desired setting. Press OK to confirm your selection. 4 Some items require additional steps. SYSTEM MENU, 5 Pressthe setup menu. RETURN, or PLAY N to exit
Language Disc Language DVD Select a language for the discs Menu, Audio, and Subtitle. Original :The original language set for the disc is selected. Other :To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 36. If you enter the wrong language code, press CLEAR.

Digital Audio Output

Others
Notes Disc Language selection may not work for some DVDs.
Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Digital Audio Output Original English French German Spanish Italian Chinese Polish Hungarian Other Others
Before Operation (Continued) - DVD part
The DRC,Vocal, PBC and Auto Play settings can be changed. q Use v/V to select the desired item and press OK.The setting of the selected item alternates between On and Off.
Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Digital Audio Output
DRC On Vocal On PBC On Auto Play Off
Digital Audio Output Each DVD disc has a variety of audio output options. Set the DVD+VCRs Digital Audio Output according to the type of audio system you use. DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if you connected the DVD+VCRs DIGITAL AUDIO OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). Stream/PCM: Select Stream/PCM if you connected the DVD+VCRs DIGITAL AUDIO OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder. PCM: Select when connected to a 2 channel digital stereo amplifier.The DVD+VCR output sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2 recording system.

Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Digital Audio Output Code Set D E
1 Select Rating on the Setup menu using the v/V buttons. 2 While Rating is selected, press B. password yet. 3 Whena you have not entered a numbered buttons to Enter 4-digit password using the
create a personal 4-digit security password, then press OK. Enter the 4-digit password again and press OK to verify. When you have already entered a password; Enter a 4-digit password using the numerical buttons to confirm the personal 4-digit security password, then press OK. If you make a mistake before pressing OK, press CLEAR and enter 4-digit security password again. from 1 using 4 Select1a: ratingsoftwareto 8 adultsv/V buttons. Level DVD for cannot be played back. Level 8 : All DVD software can be played back. The limitation will be more severe as the level number is lower. Unlock: If you select Unlock, Parental Control is not active.The disc will play in full. Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the DVD+VCR, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc.The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop.You must enter the 4-digit password or change the rating level in order to play the disc. Press OK to confirm your rating selection, then press SYSTEM MENU to exit the menu.
1 Select Country Code using the v/V buttons on the setup menu. 2 While Country Code is selected, press B. 3 Follow step 3 of Rating on left. 4 Select the first character using the v/V buttons. cursor button and 5 Shift thecharacterusing 2v/V buttons.select the second using to confirm your Area code 6 Press OK then press SYSTEM MENU to exit the selection,
menu. Note Confirmation of the 4-digit password is necessary when the password is changed (see Changing the 4-digit Code below ). Changing the 4-digit Code 1 Follow Steps 1-2 as shown above to the left (Rating). 2 Enter the old password, then press OK. 3 Select Change using v/V buttons then press OK. 4 Enter the new 4-digit password, then press OK. 5 Enter exactly the same password a second time and verify by pressing OK. 6 Press SYSTEM MENU to exit the menu. If you forget your 4-digit Code If you forget your password, clear the current password by following the procedure below. 1 Press SYSTEM MENU to display the setup menu. 2 Use the Number buttons to enter the 6-digit number 210499. The 4-digit password is cleared. 3 Enter a new password as shown above to the left (Rating).

Press B to select the recording speed. Press v or V to select the desired tape speed (SP, IP, or LP). IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program.
PR PR-01 ------DATE T I M E 19 : 00 ~ 20: - - : - - ~ - -: - -- - : - -~- - : - -- - : - -~- - : - -- - : - -~- - : - -- - : - -~- - : - -- - : - -~- - : - -SP SP SP SP SP SP SP
Press the numbered buttons to enter the station that you wish to record. When selecting stations 1 - 9, press 0 first, then the channel number; for example Stations 3 - 03.You may also select Channels by pressing v or V. Once selected press B. If you wish to record from AUDIO IN (L/R) and VIDEO IN on the front or from the EURO SCART sockets on the back of your unit, press INPUT to select for correct display (AV1, AV2 or AV3).
PR PR-01 ------DATE -------TIME - : - - ~ - -: - : - - ~ - -: - : - -~- - : - : - -~- - : - : - -~- - : - : - -~- - : - : - -~- - : SP SP SP SP SP SP SP
Press SYSTEM MENU to set another timer record event and follow steps 3 to 7. Check that the timer event details are correct. Press SYSTEM MENU twice. If PLEASE CHECK is displayed, you have entered incorrect and will need to re-enter the data. Press 1 to switch your DVD+VCR Standby. TIMER will appear in the display window while your DVD+VCR waits to make the recording. To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode.
Press the numbered buttons to enter the date of the programme. If you press OK before entering the date you may select one of the following automated recording features. Use 1 or 2 to select, then press OK to confirm. DLY To record every day (except Saturday and Sunday) at the same time. SU ~ SA To record at the same time every week.
PR DATE T I M E - - : - - ~ - -: - PR---- - : - - ~ - -: - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - DLY SU MO TU WE TH FR SP SP SP SP SP SP SP SA OK i
Notes q If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Use v or V to select the event that you wish to delete or change. Press b to delete the event.or Press OK to change; then press b or B to select; Station, Date, Start and End times and LP. Press v or V to enter the correct information. q If Timer record events Overlap. Make sure that the preset times of the timer recording events do not overlap. If they do, the earlier programme will always be given priority. Example: Programme 1 is programmed to start at 16:00 and end at 17:00. Programme 2 is programmed to start at 16:30 and end at 17:30. (In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2 will be recorded.)

Operation with DVD and Video CD English Playing a DVD and Video CD
Playback Setup DVD VCD2.0 VCD1.1 q Turn on the TV and select the video input source connected to the DVD player. q Audio system:Turn on the audio system and select the input source connected to the DVD player.

General Features

Note Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.
1 /3 Moving to another TITLE DVD When a disc has more than one title, you can move to another title as follows: q Press DISPLAY, then press the appropriate numbered button (0-9) to select a title number.
1 Press OPEN/CLOSE to open the disc tray. chosen disc 2 Load yourside down. in the tray, with the playback
When a double-sided DVD is inserted, make sure the side you want to play is facing down.
Moving to another CHAPTER/TRACK DVD
Press OPEN/CLOSE to close the tray. READING appears on the TV screen, and playback starts automatically. If playback does not start, press PLAY N. In some cases, the disc menu might appear instead.
If a menu screen is displayed The menu screen may be displayed first after loading a DVD or Video CD which offer a menu. DVD Use the b B v V buttons to select the title/chapter you want to view, then press OK to start playback. Press TITLE or DISC MENU to return to the menu screen.
When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows: q Press. or > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. q Press. twice briefly to step back to the previous chapter/track. q To go directly to any chapter during DVD playback, press 4 DISPLAY.Then, press 3/4 to select chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9). Note For two-digit numbers, press the numbered buttons (0-9) in rapid succession. Search DVD

VCD2.0 VCD1.1

q Use the number buttons to select the track you want to view. Press RETURN to return to the menu screen. q Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page 19. Notes If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see Parental Control, on page 20). DVDs may have a region code. Your player will not play discs that have a region code different from your player.The region code for this player is 2 (two). To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode.

Insert a disc and close the tray. Audio CD; Audio CD menu appears on the TV screen go to step 4. MP3 disc; The MP3-JPEG choice menu appears on the TV screen. Go to step 2
Use v/V to select the MP3 then press OK. The MP3 menu appears on the TV screen. Press RETURN to move to the MP3 -JPEG choice menu.
Folder1 Folder2 Folder3 Folder4 Folder5 Folder6 Folder7 Folder8

00:00 Clear All OFF

Program
Use v/V to select a folder then press OK. A list of files in the folder appears. Use v/V to select a track then press PLAY N or OK. Playback starts. During playback, the current tracks elapsed playing time will appear on the display window and menu. Playback will stop at the end of the disc.
Press TITLE to move to the next page. Press DISC MENU to move to the previous page.
TRACK01 TRACK02 TRACK03 TRACK04 TRACK05 TRACK06 TRACK07 TRACK08 0: 56: 18
TRACK TRACK TRACK TRACK TRACK TRACK TRACK TRACK 1.mp3 2.mp3 3.mp3 4.mp3 5.mp3 6.mp3 7.mp3 8.mp3

Clear All STER. NORM.

Clear All OFF

Audio CD menu

MP3 menu
Tip If you are in a file list and want to return to the Folder list, use the v/V to highlight and press OK to return to the previous menu screen.
To stop playback at any other time, press STOP x.
Operation with Audio and MP3 Disc (Continued) English
MP3 Pause CD 1 Press PAUSE/STEP during playback. 2 To return to playback, press PLAY N or press PAUSE/STEP again. Moving to another Track q Press. or > briefly during playback to go to the next track or to return to the beginning of the current track. q Press. twice briefly to step back to the previous track. q In case of audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) during playback. MP3 Repeat Track/All/Off CD 1 To repeat the track currently playing, press REPEAT.
The Repeat icon and TRACK appears on the menu screen.
Repeat A-B CD To repeat a sequence. 1 During disc playback, press REPEAT A-B at your chosen starting point.
The Repeat icon and A * appears on the menu screen.
The Repeat icon and A B appears on the menu screen, and the sequence begins to play repeatedly.
3 To exit the sequence and return to normal play, press

REPEAT A-B again.

The Repeat icon and OFF appears on the menu screen.
2 To repeat all tracks on a disc, press REPEAT a second
The Repeat icon and ALL appears on the menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
3D Surround CD This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multichannel audio from a home theater system. 1 Press DISPLAY or AUDIO during playback. 2 Use b/B to select the sound icon. The sound option will be highlighted. 3 Use v/V to select NORM., or 3D SUR. Changing the Audio Channel CD Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT, or RIGHT).

Folder1

Total number of files and folders on the disc should be less than 650. Some disc may be incompatible due to different recording format or condition of disc. When you are using software such as Easy CD Creator to burn the jpeg files into the CD-R, ensure that all the selected files have the.jpg extensions when copying into the CD layout. If the files have.jpe or.jpeg extensions, please rename them as.jpg files. File names without.jpg extension will not be able to be read by this DVD+VCR. Even though the files are shown as JPEG image files in windows explorer.
Picture1.jpg Picture2.jpg Picture3.jpg Picture4.jpg Picture5.jpg Picture6.jpg Picture7.jpg 5/32 1024X768 Slide Speed Off 5/32 1024X768 Picture5.jpg
Tip There are three viewing Slide Speed options: Fast, Normal, Slow, and Off. Press 1/2 to highlight the Slide Speed then press 3/4 to select the option you want to use, and press OK.
5 To stop viewing at any other time, press STOP. The JPEG menu appears.
Programmed Playback Programmed Playback with Audio CD and MP3 Disc
The Program function enables you to store your favorite tracks from any disc in the player memory. Program can contain 30 tracks.
Note On a Video CD with PBC, you must set PBC to Off on the setup menu to use the Program function. See page 19.
Press PROGRAM during playback or in the stop mode to enter the Program Edit mode.
The mark will appear to the right of the word Program on the right side of the menu screen.
1 Insert Video CD and close the tray. 2 Press PROGRAM while playback is stopped.
The VCD Program menu will appear.
TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5
Note Press PROGRAM to exit the Program Edit mode; the mark will disappear. Select a track, then press OK to place the selected track on the Program list.
Repeat step 2 to place additional tracks on the Program list.
TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 TRACK 8 0: 56: 18 STER. Clear All NORM.
TRACK 6 TRACK 7 TRACK 8 Clear All
TRACK 12 TRACK 8 TRACK 10 TRACK 3
TRACK 8.mp3 TRACK 2.mp3 TRACK 4.mp3 TRACK 3.mp3
Note Press RETURN or PROGRAM to exit the Program menu. steps 2-6 of 3 FollowCD and MP3Programmed Playback with Audio disc on left.

Clear All

4 To resume normal playback from programmed playback, press PROGRAM.
NORMAL appears on the TV screen.

4 Press B. 5

The programmed track you selected last is highlighted on the program list.

Repeat Programmed Tracks q To repeat the track currently playing, press REPEAT.
Use v/V to select the track you want to start playing.
To repeat all tracks on the program list, press REPEAT a second time.
To cancel Repeat mode, press REPEAT a third time.
6 Press PLAY N to start. 7
Playback begins in the order in which you programmed the tracks and PROG. appears on the menu screen. Playback stops after all of the tracks on the Program list have played once.
Erasing a Track from Program List 1 Press PROGRAM during playback (Audio CD and MP3 disc only) or in the stop mode to enter the Program Edit mode.
To resume normal playback from programmed playback, press program to disappear the E mark and then select a track of CD (or MP3) list and then press OK.
PROG. disappears on the menu screen.

mark will appear.

2 Press 2 to move to the Program list. Use 3/4 to select the track that you wish to erase from

the Program list.

4 Press CLEAR.
The track will be erased from the Program list.
Erasing the Complete Program List 1 Follow steps 1-2 of Erasing a Track from Program List as above. Use 3/4 to select Clear All, then press OK.
The complete Program for the disc will be erased. The programs are also cleared when the disc is removed.
Programmed Playback with Video CD
Additional Operation On Screen Display
You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape.
Video Doctor (Self-Diagnosis)
This feature informs you that there is a problem with your VCR.These error messages will appear on the TV screen.
Press SYSTEM MENU. Press 1 or 2 to select Dr. Press OK.
Press DISPLAY to display. Press DISPLAY repeatedly to cycle through the display options.The tape counter and amount of tape left will appear if there is a tape loaded.
3 the On Screen 2 Afterclearseconds the majority of or tape counterDisplays will leaving only the clock and the amount of tape left on the screen. Press DISPLAY again to remove all displays from the TV screen.

VIDEO DOCTOR

HEAD STATUS TAPE STATUS NO. OF TIMER PROGRAMME NEXT TIMER PROGRAMME

Tape Counter Memory Stop

The Digital Tape Counter can be displayed on the display window instead of the time by pressing DISPLAY on the remote control.The Digital Tape Counter indicates the relative positions of recordings on the tape.
or 4 to 2 Press 3 STATUScheck a problem. HEAD
PLEASE CLEAN: Clean your video heads.

VCR A should be connected to the SCART socket on the rear panel of your unit or the AV sockets on the front panel of your unit.
2 Insert theB.recorded tape into VCR A and a blank tape into VCR To start recording, 3 PLAY N on VCRpress the RECORD on VCR B and A. you want copying, 4 Whenthe STOPto finishboth video recorders. x on press
Press STOP twice within 5 seconds.

Troubleshooting English

Check the following guide for the possible cause of a problem before contacting service. Symptom DVD or VCR do not work properly. No power. The power is on, but the DVD player does not work. No picture. Cause q DVD or VCR button is not switched properly. q The power cord is disconnected. q No disc is inserted. Correction q Refer to page 6. q Plug the power cord into the wall outlet securely. q Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.) q Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen. q Connect the video cable into the jacks securely. q Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. q Connect the audio cable into the jacks securely. q Turn on the equipment connected with the audio cable. q Set the Digital Audio Output to the correct position, then turn on the DVD player again by pressing POWER. q Clean the disc. q Check tuning, carry out tuning again. q Insert a playable disc. (Check the disc type and Regional code.) q Place the disc with the playback side down. q Place the disc on the disc tray correctly inside the guide. q Clean the disc. q Cancel the Rating function or change the rating level. q Remove the obstacle. q Replace the batteries with new ones. q Eject the tape in. q Switch AUDIO in the main menu to STEREO.
q The TV is not set to receive DVD signal output. q The video cable is not connected securely. q The equipment connected with the audio cable is not set to receive DVD signal output. q The audio cables are not connected securely. q The power of the equipment connected with the audio cable is turned off. q The Digital Audio Output is set to the wrong position. q The disc is dirty. q The TV channels are not tuned in properly. q An unplayable disc is inserted. q The disc is placed upside down. q The disc is not placed within the guide. q The disc is dirty. q The Rating level is set.