Philips DVD player/recorder

DVDR3380

Recording made easy
Compact-size DVD recorder with Dual media, DivX, and i.Link
Plays and records what you want Dual Media conveniently records on both DVD+R/RW & DVD-R/RW Plays CD, (S)VCD, DVD, DVD+R/RW, DVD-R/RW Plays MP3, JPEG, DivX Simplicity in recording and playback ShowView for quick and easy programming VPS/ PDC records a TV program precisely from start to end i.LINK digital input for perfect digital camcorder copies SmartAlgo ensures recording quality and compatibility Easy to use graphic user interface

DVD player/recorder

DVDR3380/31

Specifications

Picture/Display
D/A converter: 10 bit, 54 MHz A/D converter: 10 bit, 27 MHz

Highlights

Tuner/Reception/Transmission
TV system: PAL B/G, SECAM L/L', PAL I, SECAM D/K, PAL D/K, SECAM B/G

Dual Media

D/A converter: 29 bit, 192 kHz A/D converter: 24 bit, 96 kHz

Connectivity

Video Recording
Recording system: NTSC, PAL Recording Modes: High Quality (HQ), Standard Play (SP), Extended Play (EP), Super Long Play (SLP) Recording enhancements: Manual Chapter Marking, Selectable Index Pictures, Auto Chapter Marking Audio compression: Dolby Digital Recording Media: DVD+R/+RW, DVD-R/-RW
Front / Side connections: Audio L/R in, CVBS in, i.LINK DV in (IEEE1394, 4-pin) Rear Connections: Digital coaxial out, Analog audio Left/Right out, RF antenna in / TV out, Composite video (CVBS) output, S-Video out, SCART1 (CVBS, RGB out), SCART2 (CVBS, RGB in)
Philips DVD Recorders support dual media recording the ability to create recordings on DVD+R/RW and DVD-R/RW discs. Now you can buy any disc and your Philips recorder will always create fully compatible recordings, which can be played on any DVD player.

Plays MP3, JPEG, DivX

ShowView

Convenience

Video Playback
Programming/Timer Enhancements: Daily/Weekly Repeat Program, Manual Timer, One Touch Recording, ShowView, VPS/PDC recording control Programmable Events: 8
With the ShowView system, all you need to do to program your video recorder is to enter the ShowView number a single code of up to nine digits (but usually less) that is printed next to each TV program in most TV guides.
Playback Media: DVD+R/+RW, CD-R/CD-RW, DVD-R/-RW, Video CD/SVCD, DVD+R DL Compression formats: MPEG2, MPEG1, DivX 3.11, DivX 4.x, DivX 5.x, DivX 6.0

VPS/ PDC

Power supply: 50Hz, 220-240V Standby power consumption: < 3 W Power consumption: 27 W (Typical) W

Audio Playback

Playback Media: DVD+R/+RW, DVD-R/-RW, DVD+R DL, CD-R/RW, Audio CD Compression format: Dolby Digital, MP3, MPEG2 Multichannel, AAC

Accessories

Included accessories: Remote Control, Full SCART cable, User Manual, 2 x AAA Batteries, Quick start guide, Warranty Leaflet, RF antenna cable Remote Control 12NC: 00611 Set dimensions (W x H x D): 360 x 43 x 322 mm Packaging dimensions (W x H x D): 498 x 124 x 413 mm Set weight: 3 kg
With VPS (Video Programming System) and PDC (Program Delivery Control), the TV station controls the beginning and the length of the programmed recording. This means that your recording device switches itself on and off at the right time even if a TV program you have programmed begins earlier or finishes later than expected.

i.LINK digital input

Still Picture Playback
Playback Media: DVD+R/+RW, DVD-R/-RW, DVD+R DL, CD-R/RW Picture Compression Format: JPEG Picture Enhancement: Rotate, Zoom, Slideshow, Slideshow with MP3 playback

Dimensions

Also known as IEEE 1394 and FireWire, i.Link carries all audio and video signals via a single cable digitally, with no loss in picture and sound quality. With i.Link digital video input, you can copy your home videos in their original digital picture quality.

SmartAlgo

SmartAlgo ensures quality recordings, regardless of disc format or quality. Its patented self-learning adaptive technology chooses the optimal write strategy for the particular disc that is being used. By doing this, it significantly improves the reliability of the recording, ensuring zero failures when recording and guaranteeing playback compatibility.

Easy to use user interface
From a simple timer recording to more advanced editing features, explore all these functions with the greatest ease. With this easy-to-use graphic interface anyone can operate this recorder. The on-screenmenus are logically arrranged and easy to understand. Additionally, guiding text is provided where needed.
Issue date 2010-12-12 Version: 6.1.15
2010 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com
12 NC: 12988 EAN: 94275 1

Philips V&MA DVDR3380_EU Firmware Upgrade
Firmware Upgrade We have developed a firmware upgrade to improve your product. This upgrade is applicable for the following models:
DVDR3380/05, DVDR3380/31, DVDR3380/51 and DVDR3380/58.
Note: Before you proceed to upgrade, please be reminded that you need to do configuration again each time after firmware upgrade!
Upgrade Procedure Step 1 Check your current version
First check your current firmware version to see if you need to upgrade: 1. When TV shows Philips wallpaper, close disc tray with no disc. 2. Press <0>, <0>, <0>, <9>, <OK> on the Remote Control. Note: In case the firmware version does not appear on the screen, eject and close the disc tray to reset, and repeat step 2. 3. The software version will be displayed on the TV screen as shown in the example below.
Compare your recorder firmware build date shown on screen with this date,

Feb 23 2007

If your existing firmware build date is earlier than the above date, please proceed to step 2 Otherwise, you do not need to upgrade.
Step 2 Download firmware upgrade
Click the link to download the new firmware package on your computer. The package is compressed into a single ZIP archive: DVDR3380_EU_Feb_23_2007.zip.
Step 3 Burning the firmware on CD-R / CD-RW
Note: You will need one blank CD-R or CD-RW disc for this step. 1. Extract the firmware upgrade files from the ZIP archive: DVDR3380_D3_EU_V02_08.CUB DVDR3380_EU_V03_27.CUB PHILIPS_45040510.BIN PHILIPS_51050217.BIN (Do not rename the filenames) Tip: For more information on burning software we refer to two popular burning software programs www.nero.com www.easycdcreator.com

Philips V&MA

2. Burn ALL the extracted files:.CUB and.BIN files (not the ZIP file) onto a blank CD-R or CD-RW disc, using the following settings: - File System: ISO 9660 + Joliet - File name length : max11 chars = 8+3 (Level 1) - Mode : 2/XA - Character set : ISO 9660 (ISO normal CD-ROM) - No multi session - Write Speed: Low Finalize the discs. (The application may do this automatically.)
Step 4 Upgrading the firmware of your recorder
Note: Do not press any buttons or interrupt the mains supply during the upgrading process, otherwise the recorder may become defective. Power up the recorder and eject the disc tray. Place the upgrade disc on the disc tray and close the tray. If the disc is recognized as an upgrade disc, the local display of recorder will show "SW UPGD". The TV screen will show a dialog box titled Disc Upgrade 4. Note: The recorder will indicate Unknown Disc in the following 2 situations. When the software upgrade is not meant for your recorder (Check the applicable models above) Problem with writing of CD-ROM. Try again with a different CD-ROM if possible. 5. To proceed with the upgrade, press <OK> on the remote control. You can cancel the upgrade at this point by navigating to <CANCEL> button on TV and pressing <OK> on the remote control. 6. If you proceed with the upgrade, the upgrading status bar is shown on TV screen. 7. Follow the on-screen instruction to proceed software upgrade and loader upgrade. 8. When the upgrading is completed, the local display of the recorder will show DRV OK, and the recorder will eject the tray. 9. Remove the upgrade disc and press <OK> on the remote control. The recorder should close the tray and restart automatically after about 10 seconds. 10. Note: If the recorder does not close the tray, do not be alarmed. Simply press <STANDBY> on the remote control to wake up the recorder and the tray will be closed immediately. 1. 2. 3.
Step 5 Confirm successful upgrade
1. 2. 3. After upgrading, the recorder will auto restart. Close disc tray with no disc. Press <0>, <0>, <0>, <9>, <OK> on the Remote Control. You should see one of below appearing on your TV screen.

Fig 1.1

Fig 1.2

Fig 1.3

Your product is successfully upgraded!
Note: If you do not see any of the above figures, please use the same upgrade disc and repeat Step 4 and Step 5
Philips V&MA Firmware upgrade history
Firmware Version V02_08 Release Date Apr This upgrade software improves the following performance: Improve on Missing PDC timer in UK Fix cannot toggle AUDIO DUAL A or DUAL B on a decoder ON preset Channel Fix Track number will skip to the current track number when input the number of the track is searched on CD. Fix DivX subtitile can't be switched when play a DivX file contain Embedded subtitile. And some subtitles of commercial DVD discs can not be played normally. Fix Set hang up during playing a comercial DVD disc, call "THE DAVINCI CODE". Update translation sting for DivX embedded subtitle display. Firmware Version V03_27 Release Date Feb This upgrade software improves the following performance: Fix Set crashed while toggling in the trick mode of T/C Menu when playback DivX disc. Fix Set freezes on disc Philips DVDR -3355 (20.09.2006)' while doing FFW into the end of the movie. Improvement on Update hang up at the end of recording. Fix Set freeze after repeat track / repeat disc while playing DivX6 file to the end.