DVD VIDEO PLAYER

DVP3010

User manual

Thank you for choosing Philips.

Need help fast?

Read your Users Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/support

01-39 DVP3010_EU_00_2

8239 17/12/2004, 10:24 AM

300 34302

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Remove fuse cover and fuse. Fix new fuse which should be a BSAmp, A.S.T.A. or BSI approved type. Refit the fuse cover. If the fitted plug is not suitable for your jack outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed to avoid a possible shock hazard should it be inserted into a 13 Amp jack elsewhere.

VAROITUS

Muiden kuin tss esitettyjen toimintojen sdn tai asetusten muutto saattaa altistaa vaaralliselle steilylle tai muille vaarallisille toiminnoille.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: Connect the blue wire to the terminal marked N or coloured black. Connect the brown wire to the terminal marked L or coloured red. Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow). Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performers Protection Acts 1958 to 1972.
Advarsel: Usynlig laserstrling ved bning nr sikkerhedsafbrydere er ude af funktion. Undg utsttelse for strling. Bemrk: Netafbryderen er sekundrt indkoblet og ofbryder ikke strmmen fra nettet. Den indbyggede netdel er derfor tilsluttet til lysnettet s lnge netstikket sidder i stikkontakten.
Luokan 1 laserlaite Varoitus! Laitteen kyttminen muulla kuin tss kyttohjeessa mainitulla tavalla saattaa altistaa kyttjn turvallisuusluokan 1 ylittvlle nkymttmlle lasersteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Huom.Toiminnanvalitsin on kytketty toisiopuolelle, eik se kytke laitetta irti shkverkosta. Sisnrakennettu verkko-osa on kytkettyn shkverkkoon aina silloin, kun pistoke on pistorasiassa.

Klass 1 laseraparat Varning! Om apparaten anvnds p annat stt n i denna bruksanvisning specificerats, kan anvndaren utsttas fr osynlig laserstrlning, som verskrider grnsen fr laserklass 1. Observera! Stmbrytaren r sekundrt kopplad och bryter inte strmmen frn ntet. Den inbyggda ntdelen r drfr ansluten till elntet s lnge stickproppen sitter i vgguttaget.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
Due to the inconsistency of disc formats provided by various disc manufacturers, your DVD system may require a playability enhancement or upgrade. As DVD technology advances, these enhancements will become common and will be easy to complete. Go to www.philips.com/support for software upgrade.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

General Information

Environmental Information
All unnecessary packaging has been omitted. The packaging has been made easy to separate into two materials: cardboard (box, buffer) and polyethylene (bags, protective foam sheet). Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

Laser safety

This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. NOTE: PICTURES SHOWN MAYBE DIFFERENT BETWEEN COUNTRIES. CAUTION (WARNING LOCATION: ON THE BACKPLATE OF THE SET) NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON.
DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc and are used under license.
Microsoft, Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries
Important Note: Due to the numerous versions of new CD-Audio copy protection or enhanced CD-Audio protection recently available on certain discs, Philips is unable to guarantee that this DVD Player is fully compatible with such new discs. Should you have difficulty playing any such CD-Audio discs, kindly refer them to your CDAudio disc retailer.

This DVD player is in conformity with the EMC directive and lowvoltage directive.
For Customer Use: Read carefully the information located at the rear of your DVD VIDEO player and enter below the Serial No. Retain this information for future reference. Model No. DVP 3010 Serial No. _______________ LASER Type Wave length Output Power Beam divergence Semiconductor laser GaAlAs 650 nm (DVD) 780 nm (VCD/CD) 7 mW (DVD) 10 mW (VCD/CD) 60 degree

18/01/2005, 4:428239 AM

English --------------------------------------- 6

English

Franais ------------------------------------ 40
Deutsch ------------------------------------ 74
Nederlands ------------------------------ 108 CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. ADVARSEL SYNLIG OG USYNLIG LASERSTRLING VED BNING UNDG UDSTTELSE FOR STRLING VARNING SYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD BETRAKTA EJ STRLEN VARO! AVATTAESSA OLET ALTTIINA NKYVLLE JA NKYMTTMLLE LASER STEILYLLE. L KATSO STEESEEN VORSICHT GEFAHR VON SICHTBARER UND UNSICHTBARER LASERSTRAHLUNG BEI GEFFNETEM GEHUSE. ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS DOUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU 17/12/2004, 10:24 AM 300 34302

Nederlands

Deutsch

Franais

Contents

Introduction

Supplied accessories.. 8 Care and safety information. 8

Disc Operations

Playable Discs.. 19 Region Codes.. 19 Playing discs... 19 Basic playback controls.. 20 Selecting various repeat/shuffle functions 20 Repeat play mode... 20
Repeating a section within a chapter/track... 20

Connections

Connecting TV.. 9-10 Using SCART jack.. 9 Using Composite Video jacks (CVBS). 9 Using Component Video jacks (Pr Pb Y). 10 Using an accessory RF modulator. 10 Connecting the power cord. 11 Optional : Connecting to an Audio System... 12
Stereo system has Dolby Pro Logic or Right / Left Audio In jack.. 12
Operations for video playback. 21 Using the Disc Menu. 21 Zooming in... 21
Resuming playback from the last stopped point... 21 Slow motion... 21 Using the OSD menu.. 21
Optional: Connecting Digital AV Receiver.... 12
Receiver has a PCM, Dolby Digital, or MPEG2 decoder.. 12

Functional Overview

Front and Rear Panels.. 13 Remote Control.. 14

Getting Started

Step 1: Inserting batteries into the Remote Control.. 15
Using the Remote Control to operate the Player... 15
Step 2: Setting up the TV. 15-17
Setting up Progressive Scan feature (for Progressive Scan TV only).. 16 To deactivate Progressive manually.. 17 Selecting the colour system that corresponds to your TV.. 17

IR Sensor

Point the remote control towards this sensor

9 STOP

To stop playback

Disc tray OPEN/CLOSE /

Open/Close the disc tray Shows the current status of the DVD Player

2; PLAY

To start or interrupt playback

Display

PREV S
To search or select previous chapter or track

TV OUT

Connect to Scart input of a TV

Mains (AC Power Cord)

Connect to a standard AC outlet Connect to CVBS Video input of a TV Connect to YPbPr input of a TV

Audio Out (Left/Right)

Connect to AUDIO inputs of an amplifier, receiver or stereo system
CVBS (VIDEO Out) YPbPr (Component Video Out)
COAXIAL (Digital audio out)
Connect to coaxial AUDIO input of a digital audio equipment
Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 17/12/2004, 10:24 AM 300 34302

Remote Control

RETURN/TITLE
To go back to previous menu/ show title menu

POWER B

To switch the DVD player to standby mode or ON

DISC MENU

Enters or exits the disc contents menu Switches on or off the playback control mode (for VCD version 2.0 only)

0-9 numerical key pad

Selects numbered items in a menu

DISPLAY

Displays information on TV screen during playback
Selects an item in the menu/ fast forward/backward, slow forward/ backward

PREVIEW MUTE

SYSTEM MENU
Access or exit DVD Players system menu
Acknowledge menu selection
T To search or select next chapter or track

SUBTITLE

To access subtitle language system menu Selects a DVD camera angle Enlarge a picture on the TV screen To access audio language system menu

STOP ( 9 )

PLAY ( B )

To start playback

PAUSE ( ; )
To pause playback temporarily / frame-by-frame playback

REPEAT

Selects various repeat modes

REPEAT (A-B)

Repeats playback a specific section on a disc
To preview the content of a track or whole disc
Disables or enables sound output
Helpful Hint: Press STOP for about 2 seconds to OPEN or CLOSE disc tray. 17/12/2004, 10:24 AM 300 34302
IMPORTANT! Make sure you have completed all the necessary connections. (See pages 9-10 Connecting TV).

(refer to your TV user manual.) The below menu appears on the TV.
CONFIRM AGAIN TO USE PROGRESSIVE SCAN. IF THE PICTURE IS GOOD, PRESS OK BUTTON ON REMOTE
3 Press POWER on the remote control to

turn on the DVD player.

4 Select the correct Video Input channel.
(See page 15). The DVD background screen appears on the TV.

Cancel

5 Press SYSTEM MENU. 6 Press 2 repeatedly to select {VIDEO

SETUP PAGE}.

0 Press 1 to highlight
OK in the menu and press OK to confirm. The set up is complete now and you can start enjoy the high quality picture.
- - Video Setup Page - TV Type TV Display Progressive Picture Setting Component On Off

Set P-SCAN On/Off

To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU.
G When the distorted picture still appears on the TV, it may be due to the connected TV does not accept progressive signals, and progressive is set by mistake. You must reset the unit to interlace format. below: PAL Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format. NTSC Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc (VCD only) and output in NTSC format. Multi Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.
To deactivate Progressive manually
4 Press to highlight one of the options
1 Turn off your TV progressive scan mode
or turn on to interlaced mode (refer to your TV user manual.)
2 Press OPEN/CLOSE on the DVD player

to open the disc tray.

3 Press numeric keypad 1 on the
remote control for few seconds. The DVD blue background screen will appear on the TV. Selecting the colour system that corresponds to your TV This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match.

For VCD with Playback Control (PBC) feature (version 2.0 only)

1 Press DISC MENU.

The disc title menu appears on the TV screen. (0-9) to select a play option.
2 Use keys or numeric keypad 3 Press OK key to confirm.
Camera Angle G Press ANGLE repeatedly to select different desired angle. Changing the Audio Language For DVD G Press AUDIO repeatedly to select different audio languages. Changing the Audio Channel For VCD G Press AUDIO to select the available audio channels provided by the disc (LEFT MONO, RIGHT MONO, MIX-MONO, STEREO). Subtitles G Press SUBTITLE repeatedly to select different subtitle languages.
G Press DISC MENU to toggle between PBC ON and PBC OFF. If you select PBC ON, the disc menu (if available) will appear on the TV. Use the S / T or the numeric keypad (0-9) to select a play option. G During playback, pressing RETURN/ TITLE will return to the menu screen (if PBC is on). If you want to skip the index menu and playback directly from the beginning, G Press DISC MENU key on the remote control to switch to PBC off.
The preview function allows you to reduce the picture of 6 tracks enough to display in a full screen. This DVD player supports the DivX movie playback that you download from your computer onto a CD-R/RW (see page 27 for more information).
Preview Function (DVD/VCD)

Playing a DivX disc

1 Press PREVIEW.
The preview menu appears on the TV screen.
Select Digest Type: Track Digest Disc Interval Track Interval

1 Load a DivX disc.

Select Digest Type: Title Digest Chapter Digest Title Interval Chapter Interval
Playback will start automatically. If not press PLAY B. subtitles, the subtitle menu will appear on the TV screen for your selection.
2 If the DivX movie contains external
G In this case, pressing SUBTITLE on the remote control will turn on or off the subtitle. G If multilingual subtitles are embedded on the DivX disc, pressing SUBTITLE will change the subtitle language during playback. Helpful Hints: Subtitle files with the following filename extensions (.srt,.smi,.sub,.ssa,.ass) are supported but do not appear on the file navigation menu. The subtitle filename have to be the same as the filename of the movie.

highlight {SLEEP}, then press 2. 15 Mins Turn off the DVD Player after 15 minutes. 30 Mins Turn off the DVD Player after 30 minutes. 45 Mins Turn off the DVD Player after 45 minutes. 60 Mins Turn off the DVD Player after 60 minutes. OFF Turn off the sleep function. Press to select a setting, then press OK to confirm your selection.
highlight {SCREEN SAVER}, then press 2. ON Select this if you wish to turn off the TV screen when disc playback is stopped or paused for more than 5 minutes. OFF Select this to disable the screen saver function. Press to select a setting, then press OK to confirm your selection.
DivX(R) VOD registration code Philips provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit us at www.divx.com/vod.
highlight {DIVX(R) VOD CODE}, then press 2. The registration code will appear.
2 Press OK to exit. 3 Use the registration code to purchase or
rent the videos from DivX VOD service at www.divx.com/vod. Follow the instructions and download the video onto a CD-R for playback on this DVD player. Helpful Hints: All the downloaded videos from DivX VOD can only be played back on this DVD player. Time search feature is not available during DivX movie playback.

Audio Setup Menu

Digital Audio Setup The options included in Digital Audio Setup are: Digital Output and LPCM Output.
1 In disc mode, press SYSTEM MENU. 2 Press to select Audio Setup icon. 3 Press OK to confirm.
1 In AUDIO SETUP PAGE, press to 4
highlight {DIGITAL AUDIO SETUP}, then press 2. Press the keys to highlight an option. Enter its submenu by pressing 2. Press to select a setting, then press OK to confirm your selection. Digital Output Set the Digital output according to your optional audio equipment connection. Off: Turn off the digital output. All: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver. PCM Only: Only if your receiver is not capable of decoding multi-channel audio. Helpful Hints: If DIGITAL OUTPUT is set to All, all audio settings except MUTE are invalid. LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust LPCM Output. Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality. 48kHz: Playback a disc recorded at the sampling rate of 48kHz. 96kHz: Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in Stereo-Classic (Flat) mode. Helpful Hint: LPCM Output can be selected only when PCM Only is activated.
- - Audio Setup Page - Analog Output Digital Audio Setup Sound Mode CD Upsampling Night Mode

Go to Audio Setup Page

Analog Output This options allows you to set the stereo analog output of your DVD Player.

1 In AUDIO SETUP PAGE, press to
highlight {ANALOG OUTPUT}, then press 2. Stereo Select this option when output delivers sound from only the two front speakers. LT/RT Select this option if your DVD Player is connected to a Dolby Pro Logic decoder. V SURR Allows the DVD player to use virtual surround sound effects.
The options included in Sound Mode Setup are: 3D, Movie Mode and Music Mode.

Sound Mode

2 Press the keys to highlight an option. 3 Enter its submenu by pressing 2. 4 Press to select a setting, then press
OK to confirm your selection. 3D This function provides a virtual surround sound experience using just two speakers. Off, Living Room, Hall, Arena and Church Movie Mode Select a Sound Mode that matches the type of music you are playing. These preset Sound Modes adjust the frequency bands of the video to enhance your favourite movie sound track. Off, Sci-Fic, Action, Drama and Concert Music Mode Select a Sound Mode that matches the type of music you are playing. These preset Sound Modes adjust the frequency bands of the audio to enhance your favourite music. Off, Digital, Rock, Classic and Jazz
highlight {SOUND MODE}, then press 2.
CD Upsampling This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. If you have activated the upsampling, the player will automatically switch to stereo mode.
OFF Select this to disable CD-upsampling.
highlight {CD UPSAMPLING}, then press 2.
88.2 kHz (X2) Select this to convert the sampling rate of the CDs twice higher than the original. 176.4 kHz (X4) Select this to convert the sampling rate of the CDs four times higher than the original.
OK to confirm your selection. Helpful Hint: CD upsampling feature is only applicable to stereo output setting. Night Mode - turning on/off In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favourite action movie without disturbing others at night.
highlight {NIGHT MODE}, then press 2. ON Select this to level out the volume. This feature is only available for movies with Dolby Digital mode. OFF Select this when you want to enjoy the surround sound with its full dynamic range.
TIPS: To return to the previous menu, press 1. To remove the menu, press SYSTEM MENU.

Video Setup Menu

1 In disc mode, press SYSTEM MENU. 2 Press to select Video Setup icon. 3 Press OK to confirm.
Setting the TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.
- - Video Setup Page - TV Type TV Display Progressive Picture Setting Component
1 In VIDEO SETUP PAGE, press to
highlight {TV DISPLAY}, then press 2.
2 Press to highlight one of the options
below: 4:3 PAN SCAN Select this if you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen. 4:3 LETTER BOX Select this if you have a normal TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed. 16:9 Select this if you have a widescreen TV.

Go To Video Setup Page

TV Type This menu contains the options for selecting the colour system that matches the connected TV. For details, see page 17.
3 Select an item and press OK.
In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD players Y Pb Pr jacks to your TV that supports the progressive video input. Otherwise, the a distorted picture will appear on the TV. For proper progressive scan set up, see page 16.
Progressive - turning on/off
Picture Setting This DVD Player provides three predefined sets of picture colour settings and one personal setting which you can define yourself.
highlight {PICTURE SETTING}, then press 2. STANDARD Select this for standard picture setting. BRIGHT Select this will make the TV picture brighter. SOFT Select this will make the TV picture softer. PERSONAL Select this to personalise your picture colour by adjusting the brightness, contrast, tint and colour (saturation).
OFF To disable Progressive Scan function. ON To enable Progressive Scan function.
highlight {PROGRESSIVE}, then press 2.
OK to confirm your selection. Follow the instructions shown on the TV to confirm the selection (if any). If a distorted picture appears on the TV screen, wait for 15 seconds for auto recovery.
3 If you select {PERSONAL}, then proceed
to steps 4~7. The PERSONAL PICTURE SETUP menu appears.
PERSONAL PICTURE SETUP BRIGHTNESS CONTRAST TINT COLOR 0 0
Switching the YUV/RGB This setting allows you to toggle the output of the video signal between RGB (on scart) and Y Pb Pr (YUV).

YUV Select this for Y Pb Pr connection. RGB Select this for Scart connection.
highlight {COMPONENT}, then press 2.
4 Press to highlight one of the
following options. BRIGHTNESS Increase the value will brighten the picture or vice versa. Choose zero (0) for average setting. CONTRAST Increase the value will sharpen the picture or vice versa. Choose zero (0) to balance the contrast. TINT Increase the value will darken the picture or vice versa. Choose zero (0) for average setting. COLOUR Increase the value will enhance the colour in your picture or vice versa. Choose zero (0) to balance the colour.
OK to confirm your selection. Warning: When the player is set to Y Pb Pr (YUV), some TV may not properly synchronise with player on the SCART connector.
5 Press to adjust the setting that best
suit your personal preference.
6 Repeat steps 4~5 for adjusting other

colour features.

7 Press OK to confirm.
1 Press twice to stop playback (if any),

then press SYSTEM MENU.

Preference Page
2 Press to select the Preference Setup

3 Press OK to confirm.

Restricting playback by Parental Control Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes.

Go To Preference Page

1 In PREFERENCE PAGE, press to
highlight {PARENTAL}, then press 2.
Audio, Subtitle, Disc Menu These menus contain various language options for audio, subtitle and disc menu which may be recorded on the DVD. For details, see page 18.

Set KID SAFE

1 KID SAFE 2G 3 PG 4 PG PGR 6R 7 NC17
2 Press to highlight a rating level for
the disc inserted and press OK. To disable Parental controls and have all Discs play, select {8 ADULT}.
the six-digit password (see page 34 Changing the password). DVDs that are rated above the level you selected will not play unless you enter your six-digit password. Helpful Hints: VCD, SVCD, CD have no level indication, so parental control function has no effect on these type of discs.This applies to most illegal DVD discs. Some DVDs are not encoded with a rating though the movie rating may be printed on the Disc cover. The rating level feature does not work for such Discs.

PBC You can set the PBC to ON or OFF. This feature is available only on Video CD 2.0 with playback control (PBC) feature. For details, see page 22. MP3/JPEG Menu - turning on/off MP3/JPEG Navigator can be set only if the disc is recorded with menu. It allows you to select different display menus for easy navigation. Changing the Password The same password is used for both Parental Control and Disc Lock. Enter your six-digit password when prompted on the screen. The default password is 136 900.
highlight {PASSWORD}, then press 2 to select {CHANGE}. Page.
2 Press OK to enter the Password Change
highlight {MP3/JPEG NAV}, then press 2.
Old Password New Password Confirm PWD
WITHOUT MENU Select this to display all the files contained in the MP3/Picture CD. WITH MENU Select this to display only the folder menu of the MP3/Picture CD.
your old six-digit password. When doing this for the first time, key in 136 900. If you forget your old six-digit password, key in 136 900.
4 Enter the new six-digit password. 5 Enter the new six-digit password a second
time to confirm. The new six-digit password will now take effect.

6 Press OK to confirm.

You can set the font type that supports the recorded DivX subtitle.
Setting the DivX Subtitle font
highlight {DivX SUBTITLE}, then press 2.
Restoring to original settings Setting the DEFAULT function will reset all options and your personal settings to the factory defaults, except your password for Parental Control and Disc Lock.
STANDARD A standard list of English subtitle fonts provided by this DVD Player. CYRILLIC Select this to display a cyrillic subtitle fonts.
1 In PREFERENCE PAGE, press 34 to 2 Press OK to confirm.
highlight {DEFAULT}, then press 2 to select {RESET}. All settings will now reset to factory defaults.

Troubleshooting

WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

No power

Solution

Check if the AC power cord is properly connected. Press the STANDBY ON on the front of the DVD system to turn on the power. Refer to your TVs manual for correct Video In channel selection. Change the TV channel until you see the DVD screen. Check if the TV is switched on. If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see page 16 for proper progressive scan set up or deactivate the progressive scan feature as below: 1) Turn off your TV progressive scan mode or turn on to interlaced mode. 2) Press OPEN/CLOSE to open the disc tray. 3) Press numeric keypad 1 on the remote control for few seconds. Sometimes a small amount of picture distortion may appear depending on the disc being played back. This is not a malfunction. Connect DVD Player directly to the TV. Make sure the disc is compatible with the DVD/ Player. Ensure that the DVD Players TV Type is set to match that of the Disc and your TV. Adjust the volume. Check that the speakers are connected correctly. Check the digital connections. Check if your receiver can decode MPEG-2 or DTS and if not, please make sure the digital output is set to PCM. Check if the audio format of the selected audio language matches your receiver capabilities. Check that the RGB/SCART cable is connected to the correct device (See Connecting TV).

No picture

Distorted picture
Completely distorted picture or black/white picture with DVD
No sound or distorted sound No audio at digital output

No sound and picture

Visit us at www.philips.com/support for service support 17/12/2004, 10:25 AM 300 34302
No output from subwoofer during stereo Check that all speaker settings in the setup menu have been change to small instead of large. Disc cant be played The DVD+R/CD-R must be finalised. Ensure the disc label is facing up. Check if the disc is defective by trying another disc. If you have recorded a Picture CD or MP3/WMA CD yourself, ensure that your disc contains at least 10 pictures or 5 MP3/WMA tracks. Region code incorrect. Check the disc for fingerprints/scratches and clean with a soft cloth wiping from centre to edge. Reset the unit by switching the player off, then on again. Aim the Remote Control directly at the sensor on the front of the player. Reduce the distance to the player. Replace the batteries in the Remote Control. Re-insert the batteries with their polarities (+/ signs) as indicated. To completely reset the player, unplug the AC cord from the AC outlet for 5-10 seconds. Operations may not be permitted by the disc. Refer to the instructions of the disc jacket. Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD Player for repair. Press STOP twice before selecting System Menu. Depending on the disc availability, some menu items cannot be selected. Check that the DivX file is encoded in Home Theater mode with DivX 5.x encoder.
Picture freezes momentarily during playback No return to start-up screen when disc is removed The player does not respond to the Remote Control

Buttons do not work

Player does not respond to some operating commands during playback. DVD Player cannot read CDs/DVDs Menu items cannot be selected
Unable to play DivX movies
Unable to select Progressive Scan on/off Check that the output of the video signal is switch to YUV. No sound during DivX movies playback An MPEG-4 or DivX movies does not repeat The audio codec may not be supported by the DVD player. Check that file size of the movies does not exceed the file size of the CD disc during burning.

Philips DVD player

DivX playback

DVP3010

See, hear, play everything
Your dream player with flawless, true-to-life picture quality and the ability to play virtually any disc! The Philips DVD player delivers your movies and music entertainment experience.
Great audio and video performance Progressive Scan component video for optimized image quality RGB on Scart single connection for high-quality video 12-bit/108MHz video processing for sharp and natural images 192kHz/24 bit audio DAC enhances analogue sound input Play it all Movies: DVD, DVD+R/RW, DVD-R/RW, (S)VCD, DivX Picture CD (JPEG) with music (MP3) playback Music: CD, MP3-CD, CD-R/RW & Windows Media Audio Fits everywhere, goes anywhere Compact design Ultra-slim design

DVD player

DVP3010/02

Highlights

Progressive Scan Progressive Scan doubles the vertical resolution of the image resulting in a noticeably sharper picture. Instead of sending a field comprising the odd lines to the screen first, followed by the field with the even lines, both fields are written at one time. A full image is created instantaneously, using the maximum resolution. At such a speed, your eye perceives a sharper picture with no line structure. RGB on Scart connectivity RGB on Scart is a cable connection that provides easy connectivity for high quality video output. 12-bit/108MHz video processing 12-bit Video DAC is a superior Digital-toAnalogue-Converter that preserves every detail of the authentic picture quality. It shows subtle shades and smoother graduation of colors, resulting in a more vibrant and natural picture. The limitation of the usual 10bit DAC become in particular apparent while using large screens and projectors. 192kHz/24 bit audio DAC 192KHz sampling enables you to have an accurate representation of the original sound curves. Together with a 24-bit resolution, more information is captured from the original analogue sound wave form, giving a much richer audio reproduction. Multi-format Movies with DivX Multi-format playability allows you to play most disc formats for maximum disc compatibility and viewing pleasure. Picture CD with MP3 Playback Picture CD is a CD-R or CD-RW disc on which you can store your MP3 and digital pictures. When inserting a Picture CD in the DVD player, a screen menu will pop up, showing your JPEG's and/or MP3 files on the disc. Just select the music and pictures files you wish to enjoy and press play or OK. You can watch your pictures on TV with your music playing simultaneously. Music: Windows Media Audio Multi-format playability allows you to play most disc formats for maximum disc compatibility and listening pleasure. Ultra-slim design The attractive enclosure has a very low profile.

PICTURE

Specifications

Picture/Display

Aspect ratio: 4:3, 16:9 D/A converter: 12 bit, 108 MHz Picture enhancement: 3/2 - 2/2 motion pull down, Progressive scan, Smart Picture Setting Slideshow with MP3 playback, Zoom

Connectivity

Other connections: Scart, ComponentVideo out Progressive, Composite video (CVBS) out, Analog audio Left/Right out, Digital coaxial out
D/A converter: 192kHz/24-bit Signal to noise ratio: 95 dB Distortion and Noise (1kHz): 80 dB Crosstalk (1kHz): 90 dB Dynamic Range (1kHz): 85 dB Sound System: Dolby Digital Sound Enhancement: 3D Virtual Surround, Night Mode, Smart Sound

Convenience

Child Protection: Child Lock, Parental Control On-Screen Display languages: Danish, Dutch, English, Finnish, French, German, Italian, Norwegian, Portuguese, Spanish, Swedish, Turkish, Polish

Video Playback

Compression formats: MPEG1, MPEG2, MPEG4, DivX 3.11, DivX 4.x, DivX 5.x, XviD Playback Media: CD, CD-R, CD-R/CD-RW, Video CD/SVCD, DVD+R, DVD+RW, DVD-R, DVDRW (Video mode), DVD-Video Video disc playback system: NTSC, PAL
Power supply: 50Hz, 220-240V Power consumption: 10 W Standby power consumption: < 0.8 W

Accessories

Audio Playback
Compression format: PCM, MP3, Windows Media Audio Playback Media: CD, CD-R, CD-RW, MP3-CD MP3 bit rates: 32 - 256 kbps
Batteries: 2 x AA Cables: None Remote control: 90221 User Manual: Eng,Ger,Fre,Spa,Ita,Gre,Por,Fin,Swe,Dan,Nor,Pol, Tur,Rus Warranty Card

Still Picture Playback

Playback Media: DVD+R/+RW, Picture CD Picture Compression Format: JPEG Picture Enhancement: Flip photos, Rotate,
Set dimensions (W x H x D): 360 x 37 x 265 mm Set weight: 1.98 kg Packaging dimensions (W x H x D): 415 x 82 x 352 mm Weight incl. Packaging: 2.98 kg

Dimensions

Issue date 2011-01-06 Version: 6.0.8
2011 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com
12 NC: 12054 EAN: 85269 2