Philips DVD Player

DVP520

PICTURE

Stylish and compact
Does size matter? Ever heard of less is more? Introducing the best value DVD-Player. No complications! Just a simple set that plays practically any disc format, including your digital photos, with absolutely no compromise to picture quality
Fits everywhere, goes anywhere Compact design Ultra-slim design Superb audio and video performance RGB on Scart single connection for high-quality video 4x video upsampling for improved image quality 12-bit/108MHz video processing for sharp, natural images 192kHz/24 bit audio DAC enhances analogue sound input Plays practically any disc format Movies: DVD, DVD+R/RW, DVD-R/RW, (S)VCD Music: CD, CD-R/RW and MP3-CD Photos: Picture CD (JPEG)
DVD Player Specifications

Picture/Display

Aspect ratio: 4:3, 16:9 D/A converter: 12 bit, 54Mhz Picture enhancement: Smart Picture Smart Picture: 4 picture presets Crosstalk (1kHz): 90 dB D/A converter: 192kHz/24 bit Distortion and Noise (1kHz): 85 dB Dynamic Range (1kHz): 90 dB Signal to noise ratio: 95 Sound System: Dolby Digital (AC-3), MPEG2, Stereo Picture enhancement: Flip photos, Rotate Rotation: 90 degree steps Slide show Zoom

DVP520/02

Product highlights
Compact design Ultra-slim design The attractive enclosure has a very low profile. RGB on Scart connectivity RGB on Scart is a cable connection that provides easy connectivity for high quality video output. Video Upsampling Video Upsampling is a technology that decreases distortion to dramatically improve picture quality. Increasing the video processing to 54MHz or even 108MHz, is in effect converting the video to 8:8:8* (54MHz) or 16:16:16 (108MHz) format which has about 4 to 8 time more horizontal resolution bandwidth than in standard DVD format. This processing reduces the MPEG "mosquito net" distortion dramatically resulting in picture quality that is pure and distortion free. 12-bit/108MHz video DAC 12-bit Video DAC is a superior Digital-to-AnalogueConverter that preserves every detail of the authentic picture quality. It shows subtle shades and smoother graduation of colors, resulting in a more vibrant and natural picture. The limitation of the usual 10bit DAC become in particular apparent while using large screens and projectors. 192kHz/24 bit audio DAC 192KHz sampling enables you to have an accurate representation of the original sound curves. Together with a 24-bit resolution, more information is captured from the original analogue sound wave form, giving a much richer audio reproduction. Multi-format Movies Multi-format playability allows you to play most disc formats for maximum disc compatibility and viewing pleasure. Multi-format Music Multi-format playability allows you to play most disc formats for maximum disc compatibility and listening pleasure. Picture CD (JPEG) Multi-format playability allows you to view images in the comfort of your living room and play most disc formats for maximum disc compatibility and viewing pleasure.

Connectivity

Audio output: Stereo Out (2 cinch) Output rear: Audio L/R out, CVBS monitor out Other connections: Analog audio Left/Right out, Composite video (CVBS) out, Digital coaxial out, S-Video out, Scart, SCART 1x

Convenience

Video Playback
Compression formats: MPEG1, MPEG2 Playback Media: 80mm + 120mm Audio Discs, CD, CD-R, CD-RW, DVD, DVD+RW, DVD-R, DVD-RW (Video mode), DVD-Video, MP3-CD, Picture CD, SVCD, Video CD, Video CD/SVCD, DVD+R Disc Playback Modes: A-B Repeat, Chapter repeat, Disc Menu, Fast Backward, Fast Forward, OSD, Pause, Screen Saver, Standard Play, Zoom DVD Region: 2 Loader Type: Tray Number of Discs: 1 Picture Quality Enhancements: Video upscaling Video disc playback system: NTSC, PAL Video Enhancement: Smart Picture, Video Upscaling

Child Protection: Parental Control Convenience Enhancements: On-screen Display Display Type: FTD Ease of Use: On Screen Display On-Screen Display languages: Danish, Dutch, English, Finnish, French, German, Italian, Norwegian, Portuguese, Spanish, Swedish OSD Languages: Polish Remote control: Zappa Remote control type: 90201

Accessories

Batteries: 2 x AA Included Accessories: Batteries for remote control, Remote Control User Manual Warranty Card
Green Specifications Dimensions

Audio Playback

Packaging material: Carton Packaging dimensions (W x H x D): 424 x 118 x 340 mm Product dimensions (W x H x D): 360 x 43 x 285 mm Product weight: 1.98 kg Weight incl. Packaging: 2.98 kg
CD Playback Enhancements: Next/Previous Track, Repeat, Resume Play, Upgradable CODECs Compression format: Dolby Digital, MP3 Playback Media: CD, CD-R, CD-RW, MP3-CD Disc Playback Modes: Next/Previous Track Search, Repeat one/album/all, Repeat Play MP3 bit rates: 32-256 kbps MP3 sample rates: 16, 22.050, 32, 44.1, 48 kHz

Still Picture Playback

Playback Media: DVD+R/+RW, Picture CD Picture compression format: JPEG
Power consumption: 12 W Power supply: 200-240 V Standby power consumption: < 1 W
Date of issue 2007-01-15 Version: 1.0
2007 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com
12 NC: 11486 EAN: 79003 1

DVD VIDEO PLAYER

01-34 DVP520_02a1
02(A)_8239 18/03/2004, 6:30 PM

210 98882

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Remove fuse cover and fuse. Fix new fuse which should be a BSAmp, A.S.T.A. or BSI approved type. Refit the fuse cover. If the fitted plug is not suitable for your jack outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed to avoid a possible shock hazard should it be inserted into a 13 Amp jack elsewhere.

VAROITUS

Muiden kuin tss esitettyjen toimintojen sdn tai asetusten muutto saattaa altistaa vaaralliselle steilylle tai muille vaarallisille toiminnoille.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: Connect the blue wire to the terminal marked N or coloured black. Connect the brown wire to the terminal marked L or coloured red. Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow). Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performers Protection Acts 1958 to 1972.
Advarsel: Usynlig laserstrling ved bning nr sikkerhedsafbrydere er ude af funktion. Undg utsttelse for strling. Bemrk: Netafbryderen er sekundrt indkoblet og ofbryder ikke strmmen fra nettet. Den indbyggede netdel er derfor tilsluttet til lysnettet s lnge netstikket sidder i stikkontakten.
Luokan 1 laserlaite Varoitus! Laitteen kyttminen muulla kuin tss kyttohjeessa mainitulla tavalla saattaa altistaa kyttjn turvallisuusluokan 1 ylittvlle nkymttmlle lasersteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Huom.Toiminnanvalitsin on kytketty toisiopuolelle, eik se kytke laitetta irti shkverkosta. Sisnrakennettu verkko-osa on kytkettyn shkverkkoon aina silloin, kun pistoke on pistorasiassa.
Klass 1 laseraparat Varning! Om apparaten anvnds p annat stt n i denna bruksanvisning specificerats, kan anvndaren utsttas fr osynlig laserstrlning, som verskrider grnsen fr laserklass 1. Observera! Stmbrytaren r sekundrt kopplad och bryter inte strmmen frn ntet. Den inbyggda ntdelen r drfr ansluten till elntet s lnge stickproppen sitter i vgguttaget.

General Information

Environmental Information
All unnecessary packaging has been omitted. The packaging has been made easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Laser safety

This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. NOTE: PICTURES SHOWN MAYBE DIFFERENT BETWEEN COUNTRIES. CAUTION (WARNING LOCATION: ON THE BACKPLATE OF THE SET) NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.
Important Note: Due to the numerous versions of new CD-Audio copy protection or enhanced CD-Audio protection recently available on certain discs, Philips is unable to guarantee that this DVD Player is fully compatible with such new discs. Should you have difficulty playing any such CD-Audio discs, kindly refer them to your CDAudio disc retailer.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
The DVD VIDEO player is in conformity with the EMC directive and low-voltage directive.
For Customer Use: Read carefully the information located at the bottom of your DVD VIDEO player and enter below the Serial No. Retain this information for future reference. Model No. DVP520 Serial No. _______________ LASER Type Wave length Output Power Beam divergence Semiconductor laser GaAlAs 650 nm (DVD) 780 nm (VCD/CD) 7 mW (DVD) 10 mW (VCD/CD) 60 degree
English --------------------------------------- 6

English

Franais ------------------------------------ 35
Deutsch ------------------------------------ 63
Espaol ------------------------------------ 91 CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. ADVARSEL SYNLIG OG USYNLIG LASERSTRLING VED BNING UNDG UDSTTELSE FOR STRLING VARNING SYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD BETRAKTA EJ STRLEN VARO! AVATTAESSA OLET ALTTIINA NKYVLLE JA NKYMTTMLLE LASER STEILYLLE. L KATSO STEESEEN VORSICHT GEFAHR VON SICHTBARER UND UNSICHTBARER LASERSTRAHLUNG BEI GEFFNETEM GEHUSE. ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS DOUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU
Italiano ------------------------------------ 119
Svenska ----------------------------------- 147
Dansk -------------------------------------- 175
5 02(A)_8239 18/03/2004, 6:30 PM 210 98882

Svenska

Italiano

Espaol

Deutsch

Franais

Contents

Introduction

Supplied accessories.. 7 Care and safety information. 7 Special DVD features. 20
Playing a Title.. 20 Camera Angle.. 20 Changing the Audio Language.. 20 Subtitles... 20

Connections

Connecting TV... 8-9
Using SCART jack.. Using Composite Video jacks (CVBS). Using S-Video jack.. Using an accessory RF modulator. 9 9
Special VCD & SVCD Features. 21

Preview... 21

Playing MP3/JPEG Picture CD. 21
General Operation.. 21 Playback selection... 21 Repeat (MP3/JPEG).. 22 Program playback... 22 Fast Forward/Reverse.. 22
Connecting the power cord. 10 Optional : Connecting to an Audio System... 11
Stereo system has Dolby Pro Logic or Right / Left Audio In jack.. 11
Special MP3/JPEG features.. 22
Preview Function (JPEG).. 22 Zoom picture (JPEG).. 22 Playback with multi-angles (JPEG). 22
Optional: Connecting Digital AV Receiver.... 11
Receiver has a PCM, Dolby Digital, or MPEG2 decoder.. 11

System Menu Options

Basic Operations.. 23 General Setup Page.. 23
Program... 23 Screen Saver.. 23

Functional Overview

Front and Rear Panels.. 12 Remote Control.. 13

Audio Setup Page.. 24-26

Speaker Setup.. 24 Digital Audio Setup.. 24-25 Dolby Digital Setup.. 25 Equalizer.. 26 3D Processing.. 26

Getting Started

Step 1: Inserting batteries into the Remote Control.. 14
Using the Remote Control to operate the Player... 14
Step 2: Setting up the TV.. 14
Selecting the colour system that corresponds to your TV.. 15

Video Setup Page.. 27-28

TV Display.. 27 Closed Captions.. 27 Angle Mark... 28 Smart Picture.. 28 Picture Setting.. 28
Step 3: Setting language preference. 16
Setting the OSD Language. 16 Setting the Audio, Subtitle and Disc menu language... 16

7 02(A)_8239 18/03/2004, 6:30 PM 210 98882

Connecting TV

AUDIO IN

S-VIDEO IN

VIDEO IN

S-VIDEO IN TV IN

VIDEO OUT

COAXIAL

TV OUT

VIDEO OUT COAXIAL

S-VIDEO OUT DIGITAL OUT

AUDIO OUT

S-VIDEO OUT

DIGITAL OUT AUDIO OUT

IMPORTANT! You only need to make one video connection from the following options, depending on the capabilities of your TV system. Connect the DVD system directly to the TV. SCART connection will let you use the features of both the Audio and Video in the DVD Player. Using SCART jack Use the SCART cable (black) to connect the DVD Players SCART jack (TV OUT) to the corresponding Scart input jacks on the TV (cable not supplied). Helpful Hint: Ensure that the TV indication on SCART cable is connected to the TV set and DVD indication on SCART cable is connected to the DVD Player.
Using Composite Video jacks (CVBS)
1 Use the composite video cable (yellow) to
connect the DVD Players CVBS (VIDEO OUT) jack to the video input jack (or labeled as A/V In,Video In, Composite or Baseband) on the TV (cable not supplied).
2 To hear the sound of this DVD Player
through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable not supplied).
8 02(A)_8239 18/03/2004, 6:30 PM 210 98882

RF coaxial cable to TV

S-VIDEO IN AUDIO IN
Back of RF Modulator (example only)

ANT IN

AUDIO IN R L

CH3 CH4

Antenna or Cable TV signal
VIDEO OUT COAXIAL S-VIDEO OUT
IMPORTANT! S-Video connection provides better picture quality.This option must be available on your TV. Using S-Video jack
1 Use the S-video cable to connect the
DVD systems S-VIDEO OUT jack to the S-Video input jack (or labeled as Y/C or S-VHS) on the TV (cable not supplied). through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable not supplied).
IMPORTANT! If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator
connect the DVD Players CVBS (VIDEO OUT) jack to the video input jack on the RF modulator. connect the RF modulator to your TVs RF jack.
2 Use the RF coaxial cable (not supplied) to
9 02(A)_8239 18/03/2004, 6:30 PM 210 98882
Connecting the power cord

IMPORTANT! Make sure you have completed all the necessary connections. (See pages 8-9 Connecting TV).
1 Turn on the TV and set to the correct
1 Open the battery compartment. 2 Insert two batteries type R06 or AA, 3 Close the cover.
Using the Remote Control to operate the Player
following the indications (+-) inside the compartment.

1 Aim the Remote Control

directly at the remote sensor (IR) on the front panel.

2 Do not put any objects

between the Remote Control and the DVD Player while operating the DVD Player.
video-in channel. You should see the blue Philips DVD background screen on the TV. Usually these channels are between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details. Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. Or, the TV Remote Control may have a button or switch that chooses different video modes. Or, set the TV to channel 3 or 4 if you are using an RF modulator. If you are using external equipment, (eg. audio system or receiver), turn it on and select the appropriate input source for the DVD Player output. Refer to the equipment owners manual for detail.
CAUTION! Remove batteries if they are exhausted or if the Remote Control is not being used for a long time. Do not use old and new or different types of batteries in combination. Batteries contain chemical substances, so they should be disposed properly.
14 02(A)_8239 18/03/2004, 6:31 PM 210 98882
Selecting the colour system that corresponds to your TV This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match.
Helpful Hint: Before changing the current TV Type setting, ensure that your TV supports the selected TV Type system. Follow the instructions that appears on the TV screen. If there is no proper picture on your TV, wait for 15 seconds for auto recovery.
HINTS:(refer to the owner's manual Changing to (selected TV Type) 1. Ensure your TV supports it. 2. If there is a blank screen on normal TV, wait 15 seconds for auto recover
- - Video Setup Page - TV Type TV Display Closed Captions Angle Mark Smart Picture Picture Setting PAL NTSC Multi

Cancel

< > - Move

OK - Select

Set TV Standard
1 Press SYSTEM MENU. 2 Press to select Video Setup Page. 3 Use the keys on the Remote
Confirm again to use (selected TV Type) If picture is good press OK on remote
Control to navigate in the menu. Move to TV Type and press 2. PAL Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format. NTSC Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output in NTSC format. Multi Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc. Select an item and press OK.

TO GO BACK TO (Current TV Type): 1. Open tray 2. Press '3' Key < > - Move OK - Select
To exit from the menu Press SYSTEM MENU or select Exit Setup Menu and then press OK.
15 02(A)_8239 18/03/2004, 6:31 PM 210 98882
Step 3: Setting language preference
You can select your own preferred language settings.This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the discs default language will be used instead. The OSD language in the system menu will remain once selected. Setting the OSD Language Setting the Audio, Subtitle and Disc menu language
- - Preference Page - Audio Subtitle Disc Menu Parental Password Default English Chinese Japanese French German Spanish Dutch Italian
Set Preference To English
1 Press STOP twice then, press SYSTEM
- - General Setup Page - Program OSD Language Screen Saver ENGLISH DEUTSCH NEDERLANDS FRANAIS ITALIANO ESPANOL SVENSKA PORTUGUESE
2 Press to select Preference Page. 3 Press to highlight the following in the
Preference Page. Audio (discs soundtrack) Subtitle (discs subtitles) Disc Menu (discs menu)

Set OSD Language English

1 Press SYSTEM MENU. 2 Press to select General Setup page. 3 Use the keys on the Remote 4
Control to navigate in the menu. Move to OSD Language and press 2. Select a language and press OK.
4 Enter its submenu by pressing B. 5 Select a language and press OK. 6 Repeat steps 3~5 for other language
settings. To exit from the menu Press SYSTEM MENU or select Exit Setup Menu and then press OK. If you choose OTHERS in Audio, Subtitle or Disc Menu,
1 Press to highlight Others. 2 Press OK and when you are asked to
enter a language code (see Language Code on page 203).
3 Input a language code by using the

numeric keypad (0-9).

4 Press OK to confirm.
16 02(A)_8239 18/03/2004, 6:31 PM 210 98882
IMPORTANT! Depending on the DVD or VIDEO CD, some operations may be different or restricted. Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction. IMPORTANT! If the inhibit icon () appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time.

Basic playback controls

Unless otherwise stated, all operations described are based on the use of Remote Control. Pausing playback (DVD/VCD/CD/MP3)
1 During playback, press PAUSE ;. 2
Playback will pause and sound will be muted. Press PAUSE ; again to select the next picture frame. PLAY B.
3 To return to normal playback, press
Selecting track/chapter (DVD/VCD/CD)
1 Press T briefly during playback to go
to the next chapter/track
2 Press S to go to the previous track
(VCD/CD) or return to the beginning of the current chapter (DVD). Press S twice briefly to step back to the previous chapter (DVD).
3 To go directly to any chapter/track, enter
the chapter/track number using the numerical keys (0-9). Resuming playback from the last stopped point (DVD/VCD/CD/MP3) In stop mode and when the disc has not been ejected, press PLAY B. To cancel resume mode In stop mode, press STOP 9 again.
18 02(A)_8239 18/03/2004, 6:31 PM 210 98882
Zooming allows you to enlarge or reduce the video image during playback.
1 Press during playback to select the
required speed: 1/2, 1/4, 1/8 or 1/16 (backward or forward). Sound will be muted.
1 Press ZOOM repeatedly to increase and
decrease the playback video image.
2 Press to pan across the TV
screen. Repeat (DVD/VCD/CD) Press REPEAT continuously to choose a Repeat mode during playback. REPEAT CHAPTER (DVD) to repeat playback of the current chapter. REPEAT TRACK/TITLE (CD/VCD/DVD) to repeat playback of the current track (CD/SVCD/VCD)/title (DVD). REPEAT ALL to repeat playback of all the disc and all the programmed tracks. SHUFFLE to repeat playback at random order. REPEAT OFF to cancel the repeat mode. Helpful Hint: REPEAT function is not available for VCD 2.0 when PCB is on. Repeat A-B (DVD/VCD/CD)
2 To return to normal speed, press PLAY B.
Helpful Hint: Slow backward is not possible on VCDs. Forward / Reverse Searching (DVD/VCD/CD)
required speed: 2X, 4X, 8X, 16X or 32X (backward or forward). Sound will be muted (DVD/VCD) or intermittent (CD).
1 Press REPEAT A-B at your chosen

starting point.

2 Press REPEAT A-B again at your chosen
end point. The section A and B can be set only within the same chapter/track. The section will now repeat continuously. 3 To exit the sequence, press REPEAT A-B.
19 02(A)_8239 18/03/2004, 6:31 PM 210 98882

Zoom (DVD/VCD/JPEG)

Slow Motion (DVD/VCD)
Time Search (DVD/VCD) The Time Search function allows you to start playing at any chosen time on the disc.

Special disc features

Playing a Title (DVD)

The data disc menu appears on the TV screen. Use to select the folder and press OK to open the folder.

::128kbps 001/162 \MP3\

(DVD example)

(Video CD example)

2 Press to select the PREVIEW type,
then press OK. The picture of each segment will appear on the screen.

M P3 M P3 M P3 M P3 M P3

Song 1 Song 2 Song 3 Song 4 Song 5
3 Press or use the numeric keypad
(0-9) to highlight an option.
(example for 6 thumbnail pictures display)
3 Press to select a track and input
your selected track number using the numeric keypad (0-9), then press OK. Playback will start automatically on the selected track. For CDDA (Musical CD) Press PREVIEW to listen to the first 10 seconds of each sound track in the disc.
The playback will start from the selected file to the end of the folder.
Playback selection During playback, you can; Press S / T to select another file in the current folder. Use on the remote to rotate/flip the picture files. Press ; repeatedly to pause/resume playback.
21 02(A)_8239 18/03/2004, 6:31 PM 210 98882
Repeat Press REPEAT continuously to access different Play Mode. SINGLE: play the selected file once, then return to the menu. REPEAT ONE: keep a JPEG image still on the screen or play an MP3 file repeatedly. REPEAT FOLDER: play all files in the selected folder repeatedly. SHUFFLE: play all files in the selected folder in random order. FOLDER : play all files in the selected folder. Program playback In Stop mode, press DISC MENU repeatedly to toggle the menu between Folder and Filelist. 1 When Filelist is on the screen, press to select the files and press 2 to add the files to the playlist. 2 Press DISC MENU to display the playlist. 3 Press 1 to delete unwanted files from the playlist. Helpful Hint: The disc reading time may exceed 10 seconds due to large number of songs compiled onto the disc. Fast forward / reverse (MP3) During playback, press to fast forward or reverse playback. To resume normal playback, press PLAY B.

Special JPEG features

Preview Function (JPEG) This function shows the content of the current folder or the whole disc.

1 Press PREVIEW during playback.
Thumbnails of 12 pictures appears on the TV screen.
(example for 12 thumbnail pictures display)
2 Press S / T to display the other
pictures on the previous/next page.
3 Use to highlight one of the

Picture CD menu.

picture and press OK to start playback,
4 Press DISC MENU to return to MP3/
Zoom picture (JPEG) During playback, press ZOOM repeatedly to display the picture with different scales. Use to view the zoomed picture. Playback with multi-angles (JPEG) During playback, press to rotate the picture on the TV screen. 3: flip the picture vertically 4: flip the picture horizontally 1: rotate the picture anti-clockwise 2: rotate the picture clockwise
22 02(A)_8239 18/03/2004, 6:31 PM 210 98882
1 Press SYSTEM MENU to enter the

Setup Menu.

Basic Operations
Program (not for Picture CD/MP3) To select favourite tracks/chapters playback in preferred sequence.
Program:Chapter(01-12) START 10 Exit
2 Press OK to enter the next level
return to the previous menu.
submenu or confirm your selection.
3 Press to enter the submenu or 4 Press 34 to highlight the desired menu.
To exit from the menu Press SYSTEM MENU or select Exit Setup Menu and then press OK. The settings will be stored in the players memory even if the player is switched off.
1 Use the numerical keypad (0-9) to
direct input the tracks or chapters (single track number with digit 0 in front, for example 05). Move the cursor by pressing to select START. Press OK to start playback. Helpful Hint: Program can be activated only when a disc is in the DVD player. Screen Saver This function is used to turn the screen saver on or off.

General Setup Page

The options included in General Setup page are: Program, OSD Language, and Screen Saver. Follow the steps below:
- - General Setup Page - Program OSD Language Screen Saver

On Off

Go To General Setup Page

Sharpness You can personalise your picture colour by adjusting sharpness, brightness or contrast. High: Choose high to make the pictures edge sharper. Medium: Choose medium to get a standard picture. Low: Choose low to make the pictures edge softer. Brightness/Contrast Choose a positive value to increase the brightness/contrast level or move to a negative value to decrease the brightness/ contrast level.
28 02(A)_8239 18/03/2004, 6:31 PM 210 98882
The options included in Preference page are: Audio, Subtitle, Disc Menu, Parental, Password and Default. Helpful Hint: Some DVDs are not encoded with a rating though the movie rating may be printed on the Disc cover.The rating level feature does not work for such Discs. Rating explanations
- - Preference Page - Audio Subtitle Disc Menu Parental Password Default
1 Press SYSTEM MENU. 2 Press to select the Preference Page.
1 KID SAFE Kids material; recommended especially for children and viewers of all ages. 2G General Audience; recommended as acceptable for viewers of all ages. 3 PG Parental Guidance suggested. 4 PG13 Material is unsuitable for children under age 13. 5-6 PG-R Parental Guidance - Restricted; recommended that parents restrict children under 17 from viewing or allow to view only when supervised by a parent or adult guardian. 7 NC-17 No children under age 17; not recommended viewing for children under age 17. 8 ADULT Mature material; should be viewed only by adults due to graphic sexual material, violence or language. OFF It will play all discs.

Go To Preference Page

Note: Preference features can be selected only during No Disc condition or STOP mode.

Parental

Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes. VCD, SVCD, CD have no level indication, so parental control function has no effect on those kinds of discs. This applies to most illegal DVD discs.
1 Press 34 to highlight Parental. 2 Enter its submenu by pressing 2. 3 Use 34 to highlight a rating level for the

disc inserted. DVDs that are rated above the level you selected will not play unless you enter your four-digit password and choose a higher level rating. To disable Parental controls and have all Discs play, choose Off.
29 02(A)_8239 18/03/2004, 6:31 PM 210 98882

Preference Setup Page

Parental - contd
Password This feature is used for Parental Control. Enter your four digit password when a hint is displayed on the screen. The default password is 1009. Default Setting the Default function will reset all options and your personal settings to the factory defaults and all your personal settings will be erased.
1 Press 34 to highlight Password. 2 Enter its submenu by pressing 2. 3 Press OK to open the New Password
1 Press 34 to highlight Default. 2 Highlight RESET by pressing 2. 3 Press OK to confirm selection.
Caution! When this function is activated, all settings will be reset to factory defaults.
Old Password New Password Confirm PWD OK
4 Enter the existing 4 digit code. 5 Enter the new 4-digit code. 6 Enter the new 4-digit code a second time
to confirm. The new 4 digit code will be take effect.

7 Press OK to exit.

Helpful Hints: If the password has been changed, the parental and disc lock code will also be changed. The default password (1009) is always active even the password has been changed.
30 02(A)_8239 18/03/2004, 6:31 PM 210 98882

Specifications

Number of lines Playback 625 Multistandard 525 (PAL/NTSC) DA Converter DVD SVCD 24 bit, 192kHz fs 96 kHz fs 48 kHz fs 48 kHz fs 44.1kHz fs 44.1kHz 4Hz- 44kHz 4Hz- 22kHz 4Hz- 22kHz 4Hz- 20kHz 4Hz- 20kHz > 90 dB > 80 dB > 80 dB > 80 dB

VIDEO PERFORMANCE

DA Converter Video Output S-Video Output 12 bit, 54kmHz 1Vpp 75 ohm Y: 1Vpp 75 ohm C: 0.3 Vpp 75 ohm RGB (SCART) output 0.7 Vpp 75 ohm
CD/VCD Signal-Noise (1kHz) Dynamic range(1kHz) Crosstalk (1kHz) Distortion/noise (1kHz) MPEG MP3 MPEG Audio L3

AUDIO FORMAT

Digital Mpeg Dolby Digital PCM compressed Digital 16, 20, 24 bits fs, 44.1, 48, 96 kHz 96, 112, 128, 256 kbps & variable bit rate fs, 32, 44.1, 48 kHz

CONNECTIONS

Scart Output S-Video Output Video Output Audio Output(L+R) Digital Output Euroconnector Mini DIN, 4 pins Cinch (yellow) Cinch (white/red) 1 coaxial IEC60958 for CDDA / LPCM IEC61937 for MPEG 1/2, Dolby Digital

MP3(ISO 9660)

Analog Sound Stereo Dolby Surround-compatible downmix from Dolby Digital multi-channel sound

CABINET

Dimensions (w x h x d) Weight 360 x 43 x 285 mm Approximately 2.0 kg

POWER CONSUMPTION

Power inlet Power consumption Power consumption in Standby mode 220-230V; 50Hz 12W < 1W
Specifications subject to change without prior notice
31 02(A)_8239 18/03/2004, 6:31 PM 210 98882
TV STANDARD (PAL/50Hz) (NTSC/60Hz)

AUDIO PERFORMANCE

Troubleshooting
WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

No power

Solution

Check if the AC power cord is properly connected. Press the STANDBY ON on the front of the DVD system to turn on the power. Refer to your TVs manual for correct Video In channel selection. Change the TV channel until you see the DVD screen. Check if the TV is switched on. Sometimes a small amount of picture distortion may appear depending on the disc being played back. This is not a malfunction. Connect DVD Player directly to the TV. Make sure the disc is compatible with the DVD Player. Ensure that the DVD Players TV Type is set to match that of the Disc and your TV. Adjust the volume. Ensure to select stereo output on your disc (except multichannel). Check that the speakers are connected correctly. Ensure that the DTS disc also supports Dolby Digital output. Check the digital connections. Check if your receiver can decode MPEG-2 or DTS and if not, please make sure the digital output is set to PCM. Check if the audio format of the selected audio language matches your receiver capabilities. Check that the SCART cable is connected to the correct device (See Connecting TV). The DVD+R/CD-R must be finalized. Ensure the disc label is facing up. Check if the disc is defective by trying another disc. If you have recorded a Picture CD or MP3 CD yourself, ensure that your disc contains at least 10 pictures or 5 MP3 tracks. Region code incorrect. Check the disc for fingerprints/scratches and clean with a soft cloth wiping from centre to edge.