Mini Hi-Fi System
3 CD Changer Mini System with 5 Speaker Dolby Pro Logic
2 x 60 watts, 40 watts, 2 x 20 watts Music Power 2 x 30 watts, 20 watts, 2 x 10 watts RMS Stereo 5 Speaker Dolby Pro Logic Surround Sound System Sound Navigation with 26 Digital Sound Control modes 3-step Dynamic Bass Boost 7-band Spectrum Analyzer with 3 Display Modes 2-way Bass Reflex Speaker System Magnetically Shielded (Front and Center Speakers) CD-Rewritable compatible 40-track CD Random Program FM/MW/LW Digital Tuning with 40 presets (LW /22) Dual logic tape deck with Auto Reverse (R+1) Digital Recording Ready Subwoofer Ready Easy set for radio 2 timer modes (wake-up/sleep) 35-key Remote Control

FW-P75

UND NA V

I G AT I O

auto reverse

d ig i t al

rding r

/ slee up

standard product information amplifier
2 x 60 watts, 40 watts, 2 x 20 watts Music Power 2 x 30 watts, 20 watts, 2 x 10 watts RMS, 10% THD, 6 Ohm, 1 kHz 5 Speaker Dolby Pro Logic Surround Sound System Sound Navigation: - Jog Shuttle - 26 mode Digital Sound Control 3-step Dynamic Bass Boost (Beat, Punch, Blast)
/21M /21 /22 /30 /34 Asia Pacific Australia/NZ Middle East/S Africa Latam Europe

loudspeaker boxes

2-way Bass Reflex 4" full range 1" Piezo Magnetically shielded

surround speakers

1-way surround speakers (3" full range) 6 Ohm

E Europe Mexico

center speaker
1-way speaker (3" full range) 12 Ohm Magnetically shielded
FM87.5-108MHz MW522-1602kHz LW153-279kHz FM75 ohm clickfit

compact disc player

3 CD changer CD-Rewritable compatible Digital servo technology Bit-check D/A converter 40-track CD Random Program Play modes (repeat/shuffle/program) CD repeat (track/disc/all) Change 2 discs while playing 1

connections

Stereo headphones: 3.5mm stereo jack Aux: cinch type sockets Subwoofer out: cinch type socket Color coded cables: - front: red/black - center: blue/black - surround: grey/white Digital Recording Ready: - digital out : cinch type socket - line out : cinch type socket

mains supply

120/230V 50~60Hz 230V/50Hz

general

made in sticker
FM/MW/LW Digital Tuning with 40 presets (LW /22) Easy set/auto store for radio

tape deck

Dual Logic Tape Deck Auto Reverse (R+1) High and normal speed dubbing CD synchro recording Automatic recording level control Electronic speed control
3 display modes incl. NITE mode Multicolor FTD display 7-band Spectrum Analyzer Demo mode Clock/timer 2 timer modes (wake-up/sleep) Wake-up with CD, tuner or tape 35-key AV Remote Control
5 Speaker Surround Sound System You can enjoy the full surround set up thanks to 3 additional Philips surround speakers. They can be used complimenting other Philips stereo enhancing features, like Incredible Surround, for a much more dynamic encounter

CD TUNER TAPE 1/2 AUX

CD DIRECT

SLEEP TIMER

REPEAT

SHUFFLE

PROGRAM
EAN: (/22) EAN: (/34) Product Dimensions: 265mm W x 310mm H x 390mm D (center unit) 210mm W x 310mm H x 233mm D (speakers) 178mm W x 90mm H x 178mm D (surround) 260mm W x 115mm H x 240mm D (center) Package Dimensions: 772mm W x 410mm H x 474mm D Product weight: 18 kg Carton contains: CD Mini System, Surround Sound Speakers and Center Speaker, Multi-Function Remote Control, Batteries (2 x AA), Operating instructions, Warranty information, FM antenna, AM antenna Printed in Singapore Date printed : Nov1999 Specifications subject to change without notice. 1999 Royal Philips Electronics N.V. All rights reserved. Dolby Pro Logic is a trademark of Dolby Laboratories http://www.philips.com

TEST TONE

VOLUME

TV VOL

CENTER

DPL BALANCE

P78 P75

with 3 CD changer

Mini Hi-Fi System

pg 01-31/P75-P78/34-Eng

2/22/00, 7:29 PM

MAGYARORSZG (FW-P78)

Minsgtansts A garanciajegyen feltntetett forgalombahoz vllalat a 2/ 1984. (III.10.) BkM-IpM egyttes rendelet rtelmben tanstja, hogy ezen kszlk megfelel a mszaki adatokban megadott rtkeknek. Figyelem! A meghibsodott kszlket belertve a hlzati csatlakozt is csak szakember (szerviz) javthatja. Ne tegye ki a kszlket esnek vagy nedvessg hatsnak! Garancia A forgalombahoz vllalat a termkre 12 hnap garancit vllal. Nvleges feszltsg.. 220-230 V Elemes mkdshez.. 2 x AA/R06 Nvleges frekvencia. 50 Hz (vagy 50-60 Hz) Teljestmny maximlis.. 145 W nvleges... 135 W kszenlti llapotban.. < 20 W rintsvdelmi osztly II. Tmeg... 20,34 kg Befoglal mretek szlessg.. 745 mm magassg... 310 mm mlysg.. 390 mm Rdirsz vteli tartomny URH OIRT... 65,81 - 74 MHz CIRR.. 87,5 - 108 MHz Erstrsz Kimeneti teljestmny.. 2000 W PMPO. 2 x 75 W, 40 W, 2 x 20 W RMS

MAGYARORSZG (FW-P75)

Minsgtansts A garanciajegyen feltntetett forgalombahoz vllalat a 2/ 1984. (III.10.) BkM-IpM egyttes rendelet rtelmben tanstja, hogy ezen kszlk megfelel a mszaki adatokban megadott rtkeknek. Figyelem! A meghibsodott kszlket belertve a hlzati csatlakozt is csak szakember (szerviz) javthatja. Ne tegye ki a kszlket esnek vagy nedvessg hatsnak! Garancia A forgalombahoz vllalat a termkre 12 hnap garancit vllal. Nvleges feszltsg.. 220-230 V Elemes mkdshez.. 2 x AA/R06 Nvleges frekvencia. 50 Hz (vagy 50-60 Hz) Teljestmny maximlis... 73 W nvleges... 70 W kszenlti llapotban.. < 15 W rintsvdelmi osztly II. Tmeg... 14.9 kg Befoglal mretek szlessg.. 685 mm magassg... 310 mm mlysg.. 390 mm Rdirsz vteli tartomny URH OIRT... 65,81 - 74 MHz CIRR.. 87,5 - 108 MHz Erstrsz Kimeneti teljestmny.. 1200 W PMPO. 2 x 30 W, 20 W, 2 x 10 W RMS

ESKA REPUBLIK

Vystraha! Tento pstroj pracuje s laserovm paprskem. Pi nesprvn manipulaci s pstrojem (v rozporu s tmto nvodem) me dojt k nebezpenmu ozen. Proto pstroj za chodu neotevrejte ani nesnmejte jeho kryty. Jakoukoli opravu v|dy svte specializovanmu servisu. Nebezpe! Pi sejmut kryt a odjitn bezpenostnch spna hroz nebezpe neviditelnho laserovho zen! Chrate se ped pmm zsahem laserovho paprsku. Zruka Pokud byste z jakhokoli dvodu pstroj demontovali, v|dy nejdve vythnte sovou zstrku. Pstroj chrate ped jakoukoli vlhkost i ped kapkami vody.
English Polski esky Slovensky Magyar

SLOVAK REPUBLIC

Prstroj sa nesmie pou|va v mokrom a vlhkom prostred! Chrnte pred striekajcou a kvapkajcou vodou!

INDEX English..5

English Magyar Slovensky esky
.. 32 Polski..62 esky..90 Slovensky..116 Magyar..142

FW-P75

CLASS 1 LASER PRODUCT

Polski

FW-P78

CONTENTS

English
General Information.. 5 Safety Information... 5 Preparation... 6 - 7 Dolby Pro Logic... 8 - 9 Controls... 10 - 12 Operating The System... 12 - 14 CD... 15 - 17 Tuner... 18 - 20 Tape.... 21 - 22 AUX/CDR.... 23 Karaoke... 23 Recording... 24 - 25 Clock... 26 Timer.... 26 - 27 Sleep Timer... 27 Specifications.. 28 - 29 Maintenance.... 30 Troubleshooting... 30 - 31

GENERAL INFORMATION

General Information
The type plate (which contains the serial number) is located at the rear of the system. Recording is permissible if copyright or other rights of third parties are not infringed.

SAFETY INFORMATION

Before operating the system, check that the operating voltage indicated on the typeplate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. If not, please consult your dealer. The typeplate is located at the rear of your system. When the system is switched on, do not move it around. Place the system on a solid base (e.g. a cabinet). Place the system in a location with adequate ventilation to prevent internal heat build-up in your system. Allow at least 10 cm clearance from the rear and the top of the unit and 5 cm from the each side. The system incorporates a built-in safety feature that prevents overheating (for model FW-P78 only). Do not expose the system to excessive moisture, rain, sand or heat sources. Under no circumstances should you repair the system yourself, as this will invalidate the warranty! English

Acknowledgement

Safety Information
Environmental Information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Dolby Pro-Logic and the double-D symbol d are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation.

Accessories (Supplied)

Remote control Batteries (two AA size) for remote control AM loop antenna FM wire antenna AC power cord CS-340 speaker package (includes one pair of surround speakers and one center speaker) for model FW-P78 only CS-120 speaker package (includes one pair of surround speakers and one center speaker) for model FW-P75 only
If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens of the CD unit inside the system. Should this occur, the CD player will not operate normally. Leave the power on for about one hour with no disc in the system until normal playback is possible. Electrostatic discharge may cause unexpected problems. See whether these problems disappear if you unplug the AC power cord and plug it in again after a few seconds. To disconnect the system from the power supply completely, remove the AC power plug from the wall socket.
Energy Star (for model FW-P78 only)
As an ENERGY STARR Partner; Philips has determined that this product meets the ENERGY STARR guidelines for energy efficiency.

PREPARATION

Rear Connections A AM Loop Antenna Connection

STANDBY ON

OFER LEVEL CONT RO L

MIN CUT OFF FREQUENCY

HIGH POWER SUBWOOFER

60Hz 150Hz

AUDIO OUT
Connect the supplied loop antenna to the AM ANTENNA terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception.
B FM Wire Antenna Connection

AUDIO IN

Connect the supplied FM wire antenna to the FM ANTENNA 75 terminal. Adjust the position of the FM antenna for the best reception. Outdoor Antenna For better FM stereo reception connect an outdoor FM antenna to the FM ANTENNA 75 terminal using a 75 coaxial wire.
DIGITAL OUT SUBWOOFER OUT L R L R AUX/CDR IN FM ANTENNA 75 AM ANTENNA LINE OUT

C Speakers Connection

FRONT + L R +

CENTER +

REAR SURROUND +

AC MAINS

L R +
Connect the right speaker to Front terminal R, with the colored wire to + and the black wire to -. Connect the left speaker to Front terminal L, with the colored wire to + and the black wire to -. Clip the stripped portion of the speaker wire as shown.

CENTER

unlock lock
CAUTION: For optimal sound performance, it is recommended to use the supplied speakers. Do not connect more than one speaker to any one pair of +/- speaker terminal. Do not connect speakers with impedance lower than the speakers supplied. Please refer to SPECIFICATION section of this manual. ready) You can connect the audio left and right LINE OUT terminals to a optional CD Recorder ANALOG IN terminals. This allows you to record in an analogue format.

Rear (surround) speakers: Connect either the wired rear surround speakers or a pair of wireless rear speakers (not supplied) to the SURROUND OUT terminals.
Center Speaker For the best sound, place the center speaker at the same height as the left and right speakers. Place the center speaker directly above or beneath the television. Rear (surround) Speakers The surround speakers should be placed at normal listening ear level or mounted on the wall at the back of the room. Most important, experiment when placing the surround speakers in order to obtain the best sound.

REAR SURROUND

REAR LEFT

FRONT LEFT

REAR RIGHT

FRONT RIGHT

Test Tone Positioning the Speakers
To get the best surround sound effect, place the speakers as follows.
FRONT LEFT SUBWOOFER CENTER SPEAKER MINI HIFI SYSTEM FRONT RIGHT
This feature enables you to adjust the Front Left, Front Right, Center and Surround Sound levels of the respective speakers in Dolby Pro Logic mode.
You must sit at the ideal sitting position and use the remote control to perform this operation.
1 Press CD, TUNER, TAPE or AUX to switch on the system. 2 Press TEST TONE. A test signal is generated; it will move through the Left, Center, Right, and Surround speakers, in that order. "TEST TONE" followed by "ADAPT BALANCE, CENTER AND REAR LEVEL" will be displayed. The test signal will last for about 90 seconds.
Setting up the Dolby Pro Logic system
You must set up the system properly in order to enjoy the Home Cinema sound to the fullest. First, connect the speakers. 5-Speaker Connection Front speakers: Connect the front speakers. Center speaker: Connect the center speaker.

SURROUND LEFT

SURROUND RIGHT
DPL 3 Press L R BALANCE BALANCE L CENTER REAR to adjust the --+ --+ sound of the REAR front left speaker. The display will show "BAL L+XX". 4 Press BALANCE R to adjust the sound of the front right speaker. The display will show " BAL R+XX". 5 Press CENTER + or - to adjust the sound of the center speaker. The display will show either "CENT +XX or -XX". 6 Press REAR + or - to adjust the sound of the surround speakers. The display will show either "REAR +XX or -XX". 7 Adjust the sound of all the speakers until AUSE TEST TONE they are equal. When you are satisfied with LUME the setting, press TEST TONE again to switch off the test signal.
Front Left and Right Speakers For the best sound, place the Left and Right speakers at an angle of approximately 45 degrees to the listener. If the speakers' magnetic field affects the television picture, increase the distance between the TV and the speakers.
Note: It is advisable to set the speakers level at normal listening level. "XX" denotes the sound level.

When you have completed the Dolby Pro Logic setup, you are ready to enjoy Home Cinema sound. Press DPL (PRO LOGIC) repeatedly to select and cycle through the various L sound modes.
This setting is for a full Dolby Surround Pro Logic mode. Press DPL to select the Dolby Surround mode. The message C "DOLBY SURROUND" L R PRO LOGIC will be S S displayed. The DPL display panel will light up.
Use this setting when full surround is not required, but a wide stereo sound is desired. It only requires the left, right and center speakers. Press DPL to select the Dolby 3 Stereo mode. The message "DOLBY 3 C STEREO" will L R PRO LOGIC be displayed. S S The DPL display panel will light up.

BALANCE

Dolby Surround Center Phantom Dolby 3 Stereo Stereo Dolby Surround
The Dolby Pro Logic display panel will light up with the selection.

Dolby Center Phantom

This setting is for use without the center speaker. It redistributes the center speaker sound to the left and right speakers, providing conventional stereo across the front. Press DPL to select the Dolby Pro Logic Center Phantom mode. The message C "CENTER PHANTOM" L R PRO LOGIC will be S S displayed. The DPL display panel will light up.

Normal Stereo

This setting is for normal stereo sound without Dolby Pro Logic. It only requires the left and right speakers. Press DPL to select the Stereo mode. The message C "STEREO" L R will be PRO LOGIC displayed. S S The DPL display panel will light up.

Dolby Surround

Dolby 3 Stereo
Important! 1 For the best Dolby Pro Logic sound, switch on DPL with DSC set to Classic. 2 Dolby Pro Logic mode will automatically switch to normal Stereo mode when headphones are connected. 3 Switch to normal stereo mode when you record on a tape.

CONTROLS

# @ ! 0

MINI HIFI SYSTEM

DISC CHANGE DISC 1 DISC 2

OPENCLOSE DISC 3

CHANGER
PROGRAM REPEAT TIMER REC NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz

DU (HS B D)

STEREO BACK FRONT HSD

L PRO LOGIC

DOLBY B NR

^ &

% @ 3

TUNER TAPE 1/2

CD DIRECT

CLOCK/ TIMER

NEWS/TA

CD3 CD

PROG SEARCH TUNING

BAND TUNER

TAPE TAPE

CDR / VIDEO AUX

PRESET v PREV SIDE NEXT v A.REV
SIDE AB STOP CLEAR PLAY PAUSE

* ( )

SLEEP TIMER

REPEAT

SHUFFLE

PROGRAM

TEST TONE

VOLUME

SOUND NAVIGATION DIGITAL SOUND CONTROL DYNAMIC BASS BOOST

MIC LEVEL MIC

TV VOL

&

DYNAMIC BASS BOOST (DBB) to select a bass boost level or to switch off bass boost. OPEN to open tape deck 2. TAPE DECK 2 TAPE DECK 1 OPEN to open tape deck 1. REPEAT to repeat a CD track, a disc, or all available discs. MUTE to switch off the sound temporarily. BALANCE L/R to balance the sound level of the Front Left and Right speakers. CENTER +/ to adjust the sound level of the center speaker. REAR +/ to adjust the sound level of the surround speakers. TEST TONE to check the sound level of the Front Left, Front Right, Center and Surround speakers. SHUFFLE to play all the available discs and their tracks in random order. SLEEP TIMER to switch the system to standby mode at a selected time. B to switch the system to standby mode. English

OPERATING THE SYSTEM

NEWS/TA NEWS!
Important: Before you operate the system, complete the preparation procedures.

Demonstration mode

Notes for remote control: First select the source you wish to control by pressing one of the source select keys on the remote control (e.g. CD, TUNER, etc.). Then select the desired function (, , , etc.).
The system has a demonstration mode that shows the various features offered by the system. When the system is switched on for the first time, the demonstration mode will start automatically.
Notes: During the demonstration, if you press any source (or standby-on) button, the system will switch to the respective mode (or standby). When the system is switched to standby mode, the demonstration will resume 5 seconds later.
To stop the demonstration mode Press and hold (on the system only) for 5 seconds when the system is in demonstration mode. The demonstration will stop. "DEMO OFF" is displayed. The system will switch to standby mode. (for model FW-P78 only) About five seconds later, the system will go into an energy saving mode ( < 2 watts ). The low power STANDBY ON LED will be lit.
Notes: When the system is switched on from the main power outlet, the CD carousel tray may open and close again to initialize the set.
Even though the AC power cord is removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on again.
To start the demonstration mode Press and hold (on the system only) for 5 seconds when the system is in standby mode. The demonstration will begin. 2 The system will proceed to set the RDS time automatically with the stored RDS preset station. If no RDS station is available in the first preset station, the program will exit automatically. After a radio station is found, "EASY SET" will be displayed and followed by TIME When searching RDS time; "SEARCH RDS TIME" will be displayed. When RDS time is read, "RDS TIME" will be displayed. The current time will be displayed for 2 seconds and stored automatically. Press CD, TUNER, TAPE or AUX. You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons. English

Switching the system ON

Selecting the Equalizer Display
You can select the desired equalizer display for the system. You must not press the DSC button on the system before using the JOG control. Adjust the JOG control to select the desired Equalizer Display, NORMAL, TOP DOWN, or NITE MODE. The selected display will be shown.
Switching the system to standby mode
Press STANDBY ON or B on the remote control. The system will switch to standby mode. (for model FW-P78 only) About five seconds later, the system will go into an energy saving mode if the demonstration mode has been disabled.

Easy Set

EASY SET allows you to store all available radio stations and RDS stations (if applicable) automatically. 1 Press and hold STANDBY ON (on the system only) for 5 seconds; when the system is in standby or demonstration mode. "EASY SET" will be displayed, and followed by "TUNER" and then "AUTO". EASY SET will start searching for all RDS radio stations with sufficient signal strength and then followed by radio stations on FM and MW band respectively. Weak RDS radio stations may be stored in later presets. All available RDS and radio stations with sufficient signal strength will be stored. Up to 40 presets may be stored.

NORMAL Display

Notes: EASY SET will start with the RDS station, if there are still presets available, it will continue to store the FM and MW bands respectively. When EASY SET is used, all previously stored radio stations will be replaced. The last preset radio station or the first available RDS station will appear on the display when EASY SET is completed. If RDS station does not transmit RDS time within 90 seconds, the program will exit automatically and the display will show NO RDS TIME.

TOP DOWN Display

Selecting the Source
Press the respective source selection button: CD, TUNER, TAPE or AUX. The display indicates the selected source.

NITE MODE Display

Note: For an external source, make sure you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/ CDR IN terminals.
Note: In NITE MODE, all lights will be switched off and the display brightness will be dimmed.

Sound Control

1 Press CD to select CD mode. 2 Press OPENCLOSE. The CD carousel tray slides out. 3 Load a CD with the printed side up in the right tray. You can load another disc in the left tray. To load the third disc, press the DISC CHANGE button. The CD carousel will rotate until the empty tray is ready for loading. 4 Press OPENCLOSE to close the CD carousel tray. The total number of tracks and the playing time of the selected disc appear on the display. 1 Press to start playback. The disc tray, track number and elapsed playing time of the current track appear on the display. To interrupt playback, press. The playing time flashes. To resume playback, press again. 2 To stop playback, press.

STANDBY ON CLOCK/ TIMER

Warning! 1) This system is designed for conventional CDs. Do not use any accessories such as disc stabilizer rings or CD treatment sheets, etc., which may damage the CD mechanism. 2) Do not load more than one disc into each tray. 3) When the CD changer is loaded with CDs, do not turn over or shake the system. This may jam the changer.
You may load three discs in the CD changer for continuous playback without interruption.
Note: All the available discs will play once, then stop.
Note: To ensure good system performance, wait until the CD changer completely reads the disc(s) before proceeding.

Discs for playback

CD Direct Play

Disc Change

You can change the outer two discs while the third inner disc is stopped or is playing. 1 Press DISC CHANGE. The CD carousel tray slides out. 2 Replace the discs in the left and right disc trays. If you wish to change the inner disc during playback, press DISC CHANGE again. "DISC CHANGE" will be displayed. The CD will stop playing. The CD carousel tray will close to retrieve the inner CD and then open again with the inner CD accessible. 3 Press OPENCLOSE to close the CD carousel tray. Selecting a desired track during playback Press or until the desired track appears on the display. The selected track number and elapsed playing time appear on the display. If you press once it will skip to the beginning of the current track and play the track again.

In shuffle mode, the system plays all the available discs and their tracks in random order. Shuffle may be used also when tracks are programmed. To shuffle all the discs and tracks 1 Press SHUFFLE. "SHUFFLE" will be displayed. The SHUFFLE, the disc and the track selected at random appear on the display. The discs and the tracks will be played in random order until you press. If you press REPEAT during shuffling, the current track or all available discs will be played repeatedly. "TRACK" or "ALL" will be displayed. The REPEAT and SHUFFLE appear on the display. 2 Press SHUFFLE again to resume normal playback. The SHUFFLE disappears from the display. You can play the current track, a disc or all available discs repeatedly. 1 Press REPEAT on the remote control to select the various repeat modes. "TRACK", "DISC", "ALL" or "OFF" will be displayed. The REPEAT appears on the display. The selected track, selected disc or all available discs will now be played repeatedly until you press. 2 Press REPEAT until the "OFF" mode is displayed to resume normal playback. The REPEAT disappears from the display. English
Shuffle (only on remote control)
Repeat (only on remote control)
Erasing the program (when
playback is stopped) Press. "PROGRAM CLEARED" will be displayed. Note: The program will be erased when the system is disconnected from the power supply or when the CD carousel tray is opened.
Notes: REPEAT DISC mode is not available during program play or shuffle mode. You can also repeat shuffling a program. TRACK or PROGRAM" will be displayed. The REPEAT, PROGRAM and SHUFFLE appear on the display.
Note: REPEAT DISC mode is not available when shuffle is selected.

Storing Preset Stations

You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER (BAND). 2 Press PROG for more than one second. The PROGRAM starts flashing and "AUTO" will be displayed. The system will start searching for all radio stations with RDS (if applicable) and then followed by radio stations on FM and MW band respectively. All available stations will be stored automatically. The frequency and preset number will be displayed briefly. The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. The system will remain tuned to the last stored preset radio station.
If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming, only the preset numbers 10 to 40 will be programmed.

Notes: During rewinding or fast forwarding of a tape, it is also possible to select another source (e.g. CD, TUNER, or AUX). Before playing a tape, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism. C-120 tape is extremely thin and is easily deformed or damaged. It is not recommended for use in this system. Store the tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV, or speaker).

AUX/CDR

KARAOKE

MIC LEVEL

SEARCH TUNING
Microphone Mixing (for model Selecting External Equipment
If you have connected the audio out terminals of the external equipment (TV, VCR, Laser Disc player, DVD player, or CD Recorder) to the AUX/CDR IN terminals, you can hear the enhanced sound from the system. 1 Press AUX to select CDR mode. "CDR" will be displayed. 2 Press AUX again to select the external (normal AUX) mode. "AUX" will be displayed.
Notes: There are two Auxiliary modes: i. the normal AUX mode. ii. the CDR mode, where the LINE OUT of this mini system is muted. You will not be able to record or listen to the sound from the LINE OUT. You are advised not to listen to and record from the same source simultaneously. All the sound control features (e.g. DSC, DBB, etc.) are available for selection.
FW-P78 only) 1 Set the MIC LEVEL control to the minimum level to prevent acoustic feedback (e.g. a loud howling sound) before you connect the microphone. 2 Connect a microphone to the MIC socket. 3 Press CD, TUNER, TAPE or AUX. 4 Play the selected source. 5 Adjust the volume level with VOLUME control. 6 Adjust the MIC LEVEL control to the mixing level that you want. 7 Start singing or talking through the microphone. Note: Keep the mic away from the speakers to prevent howling.

RECORDING

SWITCH OFF DOLBY PRO LOGIC WHEN RECORDING
Recording from other sources
(only on tape deck 2) 1 Press TAPE ( TAPE 12 ) to select tape deck 2. 2 Load a blank tape into tape deck 2 with the open side downward. 3 Press or to select the recording tape side (see Tape Side under TAPE section). 4 Press CD, TUNER or AUX. Start playback of the selected source. 5 Press REC to start recording. The REC starts flashing. 6 Press to stop recording. Notes: Only or mode is available during recording. During recording, it is not possible to listen to another source.

NEWS! NEWS/TA

PRESET v PREV SIDE NEXT A.REV
SIDE AB SEARCH TUNING STOP CLEAR PLAY PAUSE
Notes: It is not possible to change tape side during recording. If you do not intend to record via the microphone, unplug the microphone to avoid accidental mixing with other recording source (for model FW-P78 only). For recording, use only tape of IEC type I (normal tape) or IEC type II (Cr02). The tape is secured at both ends with leader tape. At the beginning and end of tape, nothing will be recorded for six to seven seconds. The recording level is set automatically, regardless of the position of Volume, DBB or DSC. To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect. If CHECK TAPE is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening. Do not cover the Cr02 tape detection hole when covering the tab opening.

Dubbing tapes (from tape deck 1 to
tape deck 2) 1 Press TAPE ( TAPE 12 ) to select tape deck 2. 2 Load the prerecorded tape into tape deck 1 with full spool to the left and a blank tape into tape deck 2 with full spool aside. 3 Press or to select the recording tape side (see Tape Side under TAPE section).
4 Press DUB (HSD) once for normal speed dubbing or twice (within 2 seconds) for high speed dubbing. "NORMAL" (normal speed) or "FAST" (high speed) will be displayed, followed by "DUB" with "< or >" scrolling left or right depending on the tape side selected. The HSD appears on the display during high speed dubbing. Dubbing will start immediately. The REC starts flashing. 5 Press to stop dubbing. 1 Load a blank tape into tape deck 2 and a disc into a disc tray. 2 Press CD to select CD mode. You can program the tracks in the order you want them to be recorded (see Programming Tracks). If not, select the disc by pressing CD (CD 123) and the tracks are recorded according to the order on the selected disc. 3 Press REC to start recording. The REC starts flashing. CD will start playback automatically. 4 Press to stop recording. English
CD Synchro Start Recording
Note: When you press RECORD while in TAPE mode, "SELECT SOURCE" will be displayed. One Touch Recording is not possible in TAPE mode.
Digital Recording via Digital Out
For CD digital recording, please refer to the Instructions Manual of the CD Recorder, digital audio equipment, etc.
Notes: Only mode is available during dubbing. At the end of side A, flip the tapes to side B and repeat the procedure. Dubbing of tapes is only possible from tape deck 1 to tape deck 2. To ensure good dubbing, use tapes of the same length. During high speed dubbing in Tape mode, the sound is reduced to a low volume. You can listen to another source while dubbing.
Recording the mixed sound / One Touch Recording
During microphone mixing, you can record the mixed sound on a tape in tape deck 2 except dubbing mode (for model FW-P78 only). For One Touch Recording, as soon as you press REC, the current source (CD, TUNER or AUX) will be recorded on tape deck 2. 1 Load a blank tape in tape deck 2. 2 Press REC to start recording. The REC starts flashing. 3 Press to stop recording.

5 Press CLOCK/TIMER again to store the setting. The clock starts.

Timer Setting

The system can switch on to CD, TUNER, or TAPE 2 mode automatically at a preset time. It can serve as an alarm to wake you up. Before setting the timer, make sure the clock is set correctly. The timer will always be switched on once it is set. The volume of the timer will increase from the minimum level until the volume level before the set is switched to standby mode. 1 Press and hold CLOCK/TIMER for more than 2 seconds to select timer mode. AM 12:00 or 00:00" or the last timer setting starts flashing depending on whether you have selected 12- or 24-hour mode. The TIMER starts flashing. The selected source is lit while other available sources are flashing. 2 Press CD, TUNER or TAPE to select the desired source. Before selecting CD or TAPE, make sure a CD or tape is loaded in the CD tray or tape deck 2. 3 Press or on the system to set the hour for the timer to start. 4 Press or on the system to set the minute for the timer to start.

View Clock

You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (CD, TUNER, etc.). The clock will be displayed for about 7 seconds. Press CLOCK/TIMER briefly. "PM 10:38 or 22:38" (the current time) will be displayed depending on whether you have selected 12- or 24-hour mode. "--:--" will be displayed if the : clock is not set.

Clock Setting

The clock can be set in either 12- or 24hour mode, e.g. "AM 12:00" or "00:00". Before setting the clock, you must be in the View Clock mode. 1 Press CLOCK/TIMER to select clock mode. 2 Press PROG (on the system only) to select 12- and 24- hour mode. If 12-hour mode is selected, "AM 12:00" starts flashing. If 24-hour mode is selected, "00:00" starts flashing. 3 Set the hour with or on the system. 4 Set the minute with or on the system.
Note: When the system goes into low power standby mode, the clock setting will not be displayed (for model FW-P78 only).
To exit without storing the setting, press on the system
Notes: During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically. When a power interruption occurs, the clock setting is erased. To set the time with RDS clock, see "Receiving RDS Radio Station" under TUNER section (for model FW-P78 only).
5 Press CLOCK/TIMER to store the start time. The timer is now set. The TIMER remains on the display. At the preset time, the timer will be activated. The selected source will be played. To switch off the TIMER 1 Press and hold CLOCK/TIMER for more than 2 seconds. 2 Press on the system to cancel the timer. The timer is now switched off. The display will show "OFF" and the TIMER disappears. To start the TIMER again (for the same preset time and source) 1 Press and hold CLOCK/TIMER for more than 2 seconds. 2 Press CLOCK/TIMER again to store the start time. The timer is now on. The TIMER appears on the display.

This feature allows you to select a length of time after which the system will switch to the standby mode automatically. 1 Press SLEEP TIMER on the remote control repeatedly to select a period of time. The selections are as follows (time in minutes): OFF 60 "SLEEP XX" or "OFF" will be displayed. "XX" is the time in minutes. 2 When you reach the desired length of time, stop pressing the SLEEP TIMER button. After this amount of time passes, the system will switch to the standby mode. To switch off the Sleep Timer Press SLEEP TIMER repeatedly until "OFF" is displayed, or press the STANDBY ON button. English
Sleep Timer (only on remote control)
Notes: During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. If the source selected is TUNER, the last tuned frequency will be switched on. If the source selected is CD, playback will begin with the first track of the selected disc or program. If the CD trays are empty, TUNER will be selected instead. If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead. The timer will not activate if a recording is in progress.

SPECIFICATIONS

Specifications (for model FW-P78 only)
AMPLIFIER Output power DPL Mode Left/Right Channel.. 2 x 150 W MPO /... 2 x 75 W RMS(1) Center Channel.. 80 W MPO / 40 W RMS, 12 Surround Channel.. 2 x 40 W MPO /.. 2 x 20 W RMS, 6 Stereo mode. 2 x 150 W MPO / 2 x 75 W RMS(1) Signal-to-noise ratio. 75 dBA (IEC) Frequency response.. Hz, 3 dB Input sensitivity AUX/CDR In.. 500 mV Output Speakers... 6 Center Speaker.. 12 SurroundSpeakers.. 6 Headphones.. 32 1000 Subwoofer Out.. 1.5 V 2dB, > 22000 Line Out.. 500 mV 2dB, > 22000 Digital Out.. IEC 958, 44.1 kHz

(1) (6 , 1 kHz, 10% THD)

TUNER FM wave range (50 kHz Grid). 87.MHz MW wave range (9 kHz Grid).. kHz Number of presets... 40 Antenna FM... 75 wire AM.. Loop antenna TAPE DECK Frequency response CrO2 tape (type II). Hz (5 dB) Normal tape (type I).. Hz (5 dB) Signal-to-noise ratio CrO2 tape (type II).. 50 dBA Normal tape (type I)... 47 dBA Wow and flutter... 0.4% DIN SPEAKERS System.. 3-way shielded; double port bass reflex Impedance... 6 Woofer... 1 x 6.5" Tweeter.. 1 x 2.5" Polydome Tweeter... 2 x 1" Dimensions (w x h x d). 240 x 310 x 315 (mm) Weight.. 4.2 kg each CENTER SPEAKER System.. shielded bass reflex Impedance... 12 Speaker Driver.. 1 x 4 full range Dimensions (w x h x d). 260 x 140 x 240 (mm) Weight... 1.5 kg
SURROUND SPEAKERS System.. closed satellite Impedance... 6 Speaker Driver.. 1 x 4 full range Dimensions (w x h x d). 234 x 103 x 224 (mm) Weight.. 0.82 kg each GENERAL INFORMATION Material/finish.. Polystyrene/Metal AC Power.. V / 50 Hz Power Consumption Active.. 145 W Standby... < 20 W Standby (energy saving mode).. < 2 W Dimensions (w x h x d).. 265 x 310 x 390 (mm) Weight (without speakers).. 8.8 kg

Subject to modification

CD PLAYER Number of programmable tracks.. 40 Frequency response.. Hz Signal-to-noise ratio.. 76 dBA Channel separation. 79 dB (1 kHz) Total harmonic distortion. < 0.02% (1 kHz)
AMPLIFIER Output power DPL Mode Left/Right Channel.. 2 x 60 W MPO /... 2 x 30 W RMS(1) Center Channel. 40 W MPO / 20 W RMS, 6 Surround Channel.. 2 x 20 W MPO /.. 2 x 10 W RMS, 3 Stereo mode.. 2 x 60 W MPO / 2 x 30 W RMS(1) Signal-to-noise ratio. 75 dBA (IEC) Frequency response.. Hz, 3 dB Input sensitivity AUX/CDR In.. 500 mV Output Speakers... 6 Center Speaker.. 6 SurroundSpeakers.. 3 Headphones.. 32 1000 Subwoofer Out.. 1.5 V 2dB, > 22000 Line Out.. 500 mV 2dB, > 22000 Digital Out.. IEC 958, 44.1 kHz
TAPE DECK Frequency response CrO2 tape (type II). Hz (5 dB) Normal tape (type I).. Hz (5 dB) Signal-to-noise ratio CrO2 tape (type II).. 50 dBA Normal tape (type I)... 47 dBA Wow and flutter... 0.4% DIN SPEAKERS System. 2-way; shielded bass reflex Impedance.. 6 Woofer... 1 x 5.25" Tweeter.. 1 x 2.5" (Ferrofluid) Dimensions (w x h x d). 210 x 310 x 233 (mm) Weight.. 2.9 kg each CENTER SPEAKER System.. shielded bass reflex Impedance.. 6 Speaker Driver.. 1 x 3" full range Dimensions (w x h x d). 260 x 115 x 240 (mm) Weight... 1.1 kg
GENERAL INFORMATION Material/finish.. Polystyrene/Metal AC Power.. V / 50 Hz Power Consumption Active... 73 W Standby... < 15 W Dimensions (w x h x d). 265 x 310 x 390 (mm) Weight (without speakers).. 6.8 kg
Specifications (for model FW-P75 only)
TUNER FM wave range (50 kHz Grid). 87.MHz MW wave range (9 kHz Grid).. kHz Number of presets... 40 Antenna FM... 75 wire AM.. Loop antenna
SURROUND SPEAKERS System.. closed satellite Impedance.. 3 Speaker Driver.. 1 x 3" full range Dimensions (w x h x d).. 178 x 90 x 178 (mm) Weight.. 0.6 kg each

MAINTENANCE

Maintenance
Cleaning the Cabinet Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records. Cleaning the CD lens After prolonged use, dirt or dust may accumulate at the CD lens. To ensure good playback quality, clean the CD lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. Cleaning the Heads and the Tape Paths To ensure good recording and playback quality, clean the heads, the capstan(s), and pressure roller(s) after every 50 hours of tape operation. Use a cotton swab slightly moistened with cleaning fluid or alcohol. You can also clean the heads by playing a cleaning tape once. Demagnetizing the heads Use a demagnetizing tape available at your dealer. English