VCD MP3-CD Mini Hi-Fi System

Video CD ver. 2.0

28/05/2001, 09:03 AM 115 20823

pg 01-032/V220/21-Eng

Es necesario que lea cuidadosamente su instructivo de manejo.

PRECAUCIN - ADVERTENCIA

No abrir, riesgo de choque elctrico

ATENCIN

Verifique que el voltaje de alimentacin sea el requerido para su aparato Para evitar el riesgo de choque elctrico, no quite la tapa. En caso de requerir servicio, dirijase al personal calificado.
Minisistema de Audio FW-V220// 220240V~; 5060 Hz 44 W Philips Mexicana, S.A. de C.V. Norte 45, # 669, Col. Industrial Vallejo Localidad y Tel: C.P. 02300 Mxico D.F., Tel. 5728-4200 Exportador: Philips Electronics HK, Ltd. Pas de Origen: China N de Serie: ______________________________ Descripcin: Modelo : Alimentacin: Consumo: Importador: Domicilio: LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO.

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

DISC CHANGE

DISC 1

DISC 2

DISC 3

OPEN CLOSE

CD / CD-R / CD-RW COMPATIBLE

CD SYNCHRO RECORDING

STANDBY-ON

CHANGER

MP3-CD

PLAYBACK

VCD MP3-CD MINI HIFI SYSTEM

CD3 VCD PAL/NTSC

ALBUM +

BAND TUNER

MP3 -CD

TAPE TAPE

TITLE +

VIDEO AUX

% ^ &
SEARCHTUNING STOPCLEAR PLAY PAUSE PREV

DEMO STOP

PRESETL
PROGRAM RECORD DUBBING A.REPLAY

MICROPHONE - LEVEL

RETURN CLOCKTIMER

VOLUME

L OPEN

PLAY/REC

TAPE 1 TAPE 2

* ( )

FULL AUTO STOP

pg 01-032/V220/21-Eng 3

Optimum disc playability : ensuring excellent picture quality Philips components and modules for the various CD applications have always enjoyed an excellent reputation in the market place for super disc playability - the ability to play discs which may be scratched, soiled or not fully according to the standard specification. This position has been underlined by tests showing the superior performance of the various Philips players, as well as by the positive experiences of millions of individual consumers around the world. Constantly improving performance As the penetration of the CD system has increased, and new applications like CD-ROM and Video CD have become commonplace, Philips Components - as the CD technology inventor and as one of the major suppliers of CD player modules in the industry - has constantly improved the performance of its products. One of the ways in which this benefits users is by optimum disc playability. This is an important parameter for CD players other than CD Audio, and especially for the Video CD applications, because any loss of data from the disc will at best cause disturbances in the reproduced picture, and at worst can cause the player to lose track so that disc playing fails.
Presenting Super Error Correction To ensure consistently good results when playing Video CD discs of all quality grades and conditions, Philips has introduced further improvements in the system's playability. These developments together are called Super Error Correction, a proprietary Philips technology optimizing the system's ability to handle less-thanperfect discs with the minimum disturbance to normal playing. By effectively eliminating virtually all errors arising under normal playing conditions, Super Error Correction ensures that the picture quality as seen by the user is independent of disc play. The video encoding and processing during mastering of the disc, and the MPEG-1 decoding and video encoding in the signal processing stages, are now the only limiting factors for picture quality.

After all other connections have been made, connect the AC power cord to the system and to the wall outlet.
CAUTION Remove batteries if they are exhausted or not to be used for a long time. Do not use old and new or different types of batteries in combination. Batteries contain chemical substances, so they should be disposed off properly.
Controls (main systems illustration on page 3)
Controls on the player and remote control 1 STANDBY-ON y
switches the system to standby/on. DBB (DYNAMIC BASS BOOST) to switch on bass boost to enhance bass response or to switch off bass boost. DIGITAL SOUND CONTROL PANEL to view the desired DSC display. DSC (DIGITAL SOUND CONTROL) to select the desired sound effect : OPTIMAL, JAZZ, ROCK or TECHNO. PROGRAM for VCD/CD/MP3-CDto programme disc tracks. for TUNER. to programme preset radio stations. for CLOCK. to select 12 or 24 hour in clock setting mode. MICROPHONE to connect microphone jack. MIC LEVEL to adjust the mixing level for karaoke or microphone recording.

8 RECORD

to start recording on tape deck 2. to dub a tape in normal speed. to view the current setting of the system.
9 DUBBING 0 DISPLAY SCREEN ! CD CHANGER TRAY @ DISC CHANGE
to change disc(s). to open or close the CD changer tray. PLAY) to select a disc tray for playback. SOURCE to select the following: VCD / (CD 123) to select VCD/CD mode (this system can playback MP3-CD format disc also). When VCD/ CD playback is stopped, press to select the disc tray 1, 2 or 3. PAL / NTSC to select corresponding PAL or NTSC system of your TV set (exception Multi-system TV).
# OPENCLOSE $ DISC 1 / DISC 2 / DISC 3 (DISC DIRECT

E Video Out Connection

Inserting batteries into the Remote Control
TUNER / (BAND) to select Tuner mode. When in tuner mode, press to select the waveband: FM or MW. TAPE / (TAPE 1 2) to select Tape mode. When tape playback is stopped, press to select either tape deck 1 or 2. AUX (VIDEO) to select sound from an external source (e.g. TV, VCR, Laser Disc player, DVD player or CD Recorder). MODE SELECTION SEARCH (TUNING ) (ALBUM -/+) + for MP3-CD onlyto select previous/next Album for VCD onlyto move the zoomed picture to the left or right. for VCD/CDto search backward/forward during playback. for TUNER. to tune to a lower or higher radio frequency. for TAPE. to rewind or fast forward a tape. for CLOCK. to set the hour (on the system only). STOPCLEAR for VCD/CD/MP3-CDto stop disc playback or to clear a programme. for TUNER. to stop programming (on the system only). for TAPE. to stop playback or recording. for DEMO. to start or stop demonstration mode (on the system only). for CLOCK. to exit clock setting or cancel timer (on the system only). for PLUG & PLAYto exit plug & play mode and return to standby mode (on the system only). PLAYPAUSE for VCD/CD/MP3-CDto start or interrupt playback. for VCD onlyto watch a still picture. for TAPE. to start playback. for PLUG & PLAYto initiate and start plug & play from standby/demo mode (on the system only). PREV / NEXT (PRESET ) (TITLE -/+) + for MP3-CD onlyto select previous/next Title. for VCD onlyto move the zoomed picture down or up. for VCD with PBC on... to select next or previous MENU or VCD track during playback. for VCD/CD.. to skip to the previous, or next track. for TUNER. to select a preset station in memory. for CLOCK. to set the minute (on the system only). VOLUME to increase or decrease the volume. n to connect headphones. DIM to select different brightness for the display screen : DIM 1, DIM 2, DIM 3 or DIM OFF. CLOCKTIMER to view the clock, set the clock or set the timer. RETURN for VCD with PBC on to return to the previous MENU level during playback (for VCD version 2.0 only). PBC (PLAYBACK CONTROL) to switch on or off PBC mode (for VCD version 2.0 only). A. REPLAY (AUTO REPLAY) to select playback mode either in continuous AUTO REPLAY or ONCE only. TAPE DECK 2 TAPE DECK 1 OSD (ON SCREEN DISPLAY) to switch on or off the on screen display on the TV screen. INCREDIBLE SURROUND (not applicable for this model) to switch on or off the surround sound effect. ZOOM to enlarge a still picture on the TV screen (for VCD operation only). VOCAL to fade out the vocal of the original song during VCD playback or to switch between mono or stereo mode during audio disc playback (for VCD/ CD/MP3 operation only).

115 20823

to change the key to suit your vocal range (for VCD operation only). I.. to decrease vocal key level. .. to restore vocal key to original setting. i.. to increase vocal key level. ECHO -/+ to adjust the echo level for karaoke (for VCD operation only). RESUME to continue playback again from where you have stopped. Only when PBC mode is switched off (for VCD operation only). SLOW to watch a VCD at a slower speed. There are 3 modes of selection (for VCD operation only). A-B to playback a certain scene or passage of a VCD/ CD repeatedly. DIGEST to scan through a VCD or a particular track. There are 4 modes of selection (for VCD operation only). REPEAT to repeat a disc track or the current disc. DIGIT (numbers consisting more than two figures must be keyed in within 2 seconds.) for VCD with PBC onto select an entry level. for VCD/CD/MP3-CDto key in a disc track to start playback or.. to select another track during playback or.. to select a track for programming. B to switch the system to standby mode.

TUNER TAPE 1/2

& ^ 4

VCD.CD 1/2/3 AUX

REPEAT

5 & ^ ^ 2

TITLE -

ALBUM -

RETURN DIGEST

RESUME

VOCAL ECHO

KEY CONTROL

Notes for remote control: First select the source you wish to control by pressing one of the source select keys on the remote control (e.g. CD , TUNER, etc.). Then select the desired function (, , , etc.). 28/05/2001, 09:03 AM 115 20823

KEY CONTROL ( I i )

Important: Before you operate the system, complete the preparation procedures.

Plug and Play

The system provides PLUG and PLAY feature that allows you to store all available radio stations automatically upon power up. If the PLUG and PLAY has not been installed
1 Upon power up, AUTO INSTALL - PRESS

PLAY will be displayed.

2 Press PLAY (on the system only) to start
installation. INSTALL will be displayed and followed by TUNER and then "AUTO". The PROG starts flashing. PLUG and PLAY will start searching for all radio stations on FM band and then followed by radio stations on MW band. All available radio stations with sufficient signal strength will be stored. Up to 40 presets may be stored. The last preset radio station will appear on the display when PLUG and PLAY is completed.
To reinstall the PLUG & PLAY
1 In Standby or Demostration mode, press and
hold PLAY for five seconds (on the system only) AUTO INSTALL - PRESS PLAY will be displayed. Press PLAY (on the system only) again to start installation.
To exit without storing the PLUG and PLAY, press button (on the system only). Notes: PLUG and PLAY will be reinitiated again during the next power up if : i) PLUG and PLAY installation was not completed. ii) No stereo frequency being detected during PLUG and PLAY, "CHECK ANTENNA" will be displayed. You can store any radio stations manually or automatically after PLUG and PLAY. When PLUG and PLAY is used, all previously stored radio stations will be replaced. During PLUG and PLAY, if no button is pressed within 15 seconds, the system will go to demonstration mode (if demonstration mode is enable)

DIM 3 - half brightness with Spectrum Analyser Off and all LEDs on the system will be switched off.

Warning!

1) This system is designed for conventional
discs. Do not use any accessories such as disc stabilizer rings or disc treatment sheets, etc., which may damage the disc mechanism. Do not load more than one disc into each tray. When the VCD changer is loaded with discs, do not turn over or shake the system.This may jam the changer. You may load three discs in the VCD changer for continuous playback without interruption. Before viewing the Video CD, ensure that the set is switched to corresponding PAL or NTSC system of your TV set (exception Multi-system TV). G G G G

Discs for playback

This system can play all digital audio disc, finalised digital audio CD-Recordable, finalised digital audio CD-Rewritable and MP3-CD format discs.
Support following MP3-CD formats: Max. Track number per Album is 255 The max. ALB number is 32 The max. programme track number is 99 Supported sampling frequencies for MP3 disc are: 32 kHz, 44.1 kHz, 48 kHz G Supported Bit-rates of MP3 disc are: 32, 64, 96, 128, 192, 256 (kbps) Following formats cant be supported G G G G The files like *.WMA, *.AAC, *.DLF, *.M3U, *.PLS Chinese filename The non-session closed discs The discs recorded under UDF format
Note: For mixed mode discs, only one mode will be selected for playback depending on the recording format.

Playing a normal disc

For normal VCD: Ensure that the system is switched to the corresponding PAL or NTSC system of your TV set (except multi-system TV).
Loading a Disc 1 Press VCD to select VCD/CD mode. 2 Press OPENCLOSE.
The disc changer tray slides out.
1 Press PLAY to start playback.
All the available discs will play once, then stop. The disc tray, track number and elapsed playing time of the current track appear on the display. To interrupt playback, press PAUSE. The playing time flashes. To resume playback, press PLAY again. 2 To stop playback, press. Note: During Disc Reading mode, if you press any button, "PLEASE WAIT" will be displayed.
3 Load a disc with the printed side up in the right
tray. You can load another disc in the left tray. To load the third disc, press the DISC CHANGE button. The disc changer tray will rotate until the empty tray is ready for loading. 4 Press OPENCLOSE to close the disc changer tray. The total number of tracks and the playing time of the selected disc appear on the display. For MP3-CD only: The first Album and the first Title information appear on the display. Note: To ensure good system performance, wait until the disc changer completely reads the disc(s) before proceeding. For MP3-CD, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.

Disc Change

You can change the outer two discs while the third inner disc is stopped or is playing.

1 Press DISC CHANGE.

2 Replace the discs in the left and right disc trays.
If you wish to change the inner disc during playback, press DISC CHANGE again. "CHANGING DISC" will be displayed. The disc will stop playing. The disc changer tray will close to retrieve the inner disc and then open again with the inner disc accessible. 3 Press OPENCLOSE to close the disc changer tray.

Disc Direct Play

To start playback from a selected disc tray, press DISC 1, DISC 2 or DISC 3 button. All the available discs will play once, then stop.
Selecting a desired track
Selecting a desired track when playback is stopped Press digit on the remote control to select the desired track. Playback will start immediately for the selected track. The selected track number and elapsed playing time appear on the display. Note: Maximum track selection from digital keys on remote control is 199 for MP3-CD and 99 for
Selecting a desired track during playback Press or (or digit 0-9 on the remote control) until the desired track appears on the display. The selected track number and elapsed playing time appear on the display. If you press once it will skip to the beginning of the current track and play the track again. For MP3-CD only
1 Load the desired discs in the disc trays. 2 Press the VCD (CD 123) button to select the
disc tray. Programming can only be done on the selected disc. 3 Press PROGRAM to start programming. The PROG flag starts flashing. 4 Press or (or digit 0-9 on the remote control) to select the desired track. + For MP3-CD, press ALBUM -/+ and TITLE -/+ to select the desired Album and Title for + programming. 5 Press PROGRAM to store the track. Repeat steps 4 to 5 to store other discs and tracks. 6 Press once to end programming. The total number of tracks programmed and total playing time appear on the display. Notes: For MP3-CD, total playing time will not be shown. If the total playing time is more than 99:59 then --:-- appears on the display instead of the total playing time. During programming, if no button is pressed within 20 seconds, the system will exit programme mode automatically.

1 Press ALBUM -/+ ( or ) until the +
desired Album appears on the display.
2 Press TITLE -/+ ( or ) until the desired +
Title appears on the display. The selected track number and elapsed playing time appear on the display. Press PLAY to start playback.
Searching for a particular passage during playback
Press or to select 4 different search speed. "FRX1" ; "FRX2" ; "FRX3" or "FRX4" is displayed on the TV screen when you select a fast rewind search. "FFX1" ; "FFX2" ; "FFX3" or "FFX4" is displayed on the TV screen when you select a fast forward search. Normal playback will begin at the end of the fast rewinding or forwarding of the selected track. Play returns to normal when PLAY is pressed or when a new track is selected.

Reviewing the programme

Reviewing of the programme is possible only when playback is stopped. Press or repeatedly to review the programmed tracks. Press to exit review mode.

Programming Tracks

Programming tracks of a loaded disc is possible when playback is stopped. The display will indicate the total tracks stored in the programme. Up to 99 tracks can be stored in the memory in any order. When 99 tracks are stored and you attempt to store another track, the display will show PROGRAM FULL. Note: Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before storing tracks
Playing the programme 1 Press PLAY to start programme playback.
PLAY PROGRAM will be displayed. The track number and elapsed playing time of the current track will appear on the display. If you press REPEAT during programme playback, the current track or all programmed tracks will be played repeatedly. "REPEAT TRACK", "REPEAT PROGRAM" or "REPEAT OFF" will be displayed. The REP and PROG flags appear on the display.

VCD/CD.

from such a VCD.
2 Press to stop programme playback.
Note: If you press any other DISC DIRECT PLAY buttons, the system will play the selected disc or track and the stored programme will be cleared.

VIDEO CD

Erasing the programme (when

1 Switch on the TV, insert a VCD with PBC and
press PLAY to start playback.
2 MENU appears on the TV screen.
If the menu consists of a list of titles, you can select a sequence directly Select your choice with the digit keys 0 - 9 on the remote control. The VCD starts playing of the selected sequence automatically. The VCD starts playing of the selected sequence automatically. Press RETURN on the remote control to go back to the previous menu. Note: If a menu consists of more than one page, press / to go through the pages. Switching off PBC G In stop mode, press PBC. On TV screen, PBC OFF will be displayed. Notes: Programme mode is not available whenever PBC mode is switched on. The menu structure depends on the programme stored on the VCD. Please refer to the information supplied with the disc.

Resume

This feature is also applicable to audio CD (except for MP3-CD).
1 Press to stop playback. 2 Press RESUME on the remote control to start
playback again from where you have stopped. "RESUME" appears on the display. Note: Resume information is lost if you select another disc or the set is disconnected from the mains, the system is switched to standby mode or when you change source. Resume is not available when PBC mode is switched on.
This feature enables you to view a still picture frame in an enlarge mode. After you have pressed PAUSE to have a still picture on the TV screen.

Return

G Press RETURN to return to the previous VCD disc MENU level. It is functional only for Video CD when PBC is switched on.
1 Press ZOOM once to enlarge the still picture
by 2 times. "ZOOM" appears on the TV screen. G You can move the zoom picture left or right by pressing or respectively. G You can move the zoom picture down or up by pressing or respectively. 2 Press ZOOM once more to return to normal still frame. 3 Press PLAY again on the remote control to continue playback.

Digest

This feature allows you to scan through a VCD for a quick review. PBC mode must be switched off. There are four digest mode for selection.

1 Press DIGEST.

"DIGEST" appears on the display. "1.INTRO SCAN" , "2.DIGEST DISC" , "3.DIGEST TRACK" and "4.EXIT DIGEST MENU" appear on the TV screen.

1. INTRO SCAN

A-B Repeat
This feature is also applicable to audio CD (except for MP3-CD). To play a certain scene or passage of the disc repeatedly.
2. DIGEST DISC 3. DIGEST TRACK

4. EXIT DIGEST MENU

1 Press A-B on the remote control during
playback to mark the start of the chosen scene or passage. "SET A" appears on the display. Press A-B again to mark the end of the chosen scene or passage. "SET B" appears on the display. The selected scene or passage is played repeatedly. "PLAY AB" appears on the display. Press A-B once more to return to normal playback. "CLEAR AB" appears on the display. Notes: You can also cancel A-B Repeat by pressing or. You can only repeat a maximum of one track. Once it cross from one track to the next, the A-B marking is reset. G Press digit 1 on the remote control to select "INTRO SCAN". The first 10 seconds of each track are played. G Press digit 2 on the remote control to select "DIGEST DISC". The first frame of each track appears on the TV screen. Press digit on the remote control to playback the desired tracks. Press or to view the previous or next page for additional information. G Press digit 3 on the remote control to select "DIGEST TRACK". The first track of the selected disc will be divided into 9 parts and displayed on the TV screen. Press digit on the remote control to playback the desired parts. Press or to digest the next track. G Press digit 4 on the remote control to select "EXIT DIGEST MENU". Digest mode will be exited.

This feature allows you to fade out the original vocal from a karaoke VCD. This feature is used together with Echo mode. You can also use it to select the different audio modes. G STEREO same effect as the original recorded disc. G STEREO VOCAL LEFT/RIGHT fade out the original vocal for special recorded Karaoke disc only (with the ECHO mode switched on). G MONO LEFT/RIGHT select the language on a bilingual VCD. Ensure that Echo mode is switched on when press VOCAL to fade out the original vocal during STEREO VOCAL LEFT/RIGHT mode. G Pressing VOCAL repeatedly allows you to select the following modes. STEREO STEREO VOCAL LEFT STEREO VOCAL RIGHT MONO LEFT MONO RIGHT STEREO
This feature allows you to view and select the next or previous MP3-CD Album. G Press ALBUM -/+ ( or ) to scroll through the previous or next Album name until the desired Album appears on the display. The selected Album will appear on the display and follow by "AXX TXXX".
This feature allows you to view and select the next or previous MP3-CD Title. G Press TITLE -/+(, or digit 0-9 on the remote control) to scroll through the previous or next Title name until the desired Title appears on the display. The selected Title will appear on the display and followed by "AXX TXXX". Note: "A" represents ALBUM and "T" represents TITLE, "XX" or "XXX" is the current selected Album or Title number.
This feature allows you to add echo while singing or talking through a microphone. G Press ECHO -/+ to decrease or increase + the echo effect. "ECHO +X", "ECHO -X" or ECHO OFF" appears on the display. Notes: "X" denotes the echo level. You are advised to put echo to the minimum level when you are not using the feature. Echo mode is switched off when echo is at the minimum level.

Key Control ( I i )

This feature allows you to change the key of your vocal range. G Press I to decrease vocal key level. "KEY -X" appears on the display. G Press i to increase vocal key level. "KEY +X" appears on the display. G Press to restore vocal key to original setting. "KEY FLAT" appears on the display. Notes: "X" denotes the key level. 28/05/2001, 09:03 AM 115 20823

MP3 Disc

Note: For 'PLUG & PLAY' feature, please refer to page 12.
Tuning to radio stations 1 Press TUNER (BAND) to select TUNER mode.
TUNER will be displayed. A few seconds later, the current radio frequency will be displayed. 2 Press TUNER (BAND) again to select the desired waveband : FM or MW. 3 Press or for more than one second, then release. The display will show SEARCH until a radio station with sufficient signal strength is found. Repeat this procedure until the desired station is reached. To tune to a weak station, briefly press or repeatedly until the display shows the desired frequency and/or when the best reception has been obtained.

Storing Preset Stations

You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display.

Automatic programming

1 Press TUNER (BAND). 2 Press PROGRAM for more than one second.
The PROG flag starts flashing and AUTO will be displayed. The system will search for every available station in the FM waveband first, then search the MW waveband. All available stations will be stored automatically. The frequency and preset number will be displayed briefly. The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. The system will remain tuned to the last stored preset radio station. Notes: You can cancel the automatic programming by pressing PROGRAM or (on the system only). If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming, only the preset numbers 10 to 40 will be programmed.
1 Press TUNER (BAND). 2 Press TUNER (BAND) again to select the
desired waveband : FM or MW. specific version only) The frequency step can be changed if necessary. In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz. In other parts of the world, it is 9 kHz. The frequency step preset in the factory is 9 KHz. For MW Band To change from 9 kHz to 10 kHz or vice versa Changing of tuning grid will erase all previously stored preset stations.
3 Press PROGRAM for less than one second.
The PROG flag starts flashing. The next available preset number will be displayed for selection. 4 Press or to tune to the desired frequency. If you wish to store the radio station to another preset number, press 4 or 3 to select the desired preset number. 5 Press PROGRAM again. The PROG flag disappears and the radio station will be stored. Repeat steps to store other preset radio stations. Notes: When 40 radio stations are stored and you attempt to store another radio station, the display will show "PROGRAM FULL. If you want to change an existing preset number, repeat steps 3 5. You can cancel manual programming by pressing (on the system only). During programming, if no button is pressed within 20 seconds, the system will exit programme mode automatically.

Selecting External Equipment
If you have connected the audio out terminals of the external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder) to the AUX IN terminals, you can hear the enhanced sound from the system.
Press AUX to select the external equipment. "AUX" will be displayed. Note: All the sound control features (e.g. DSC, DBB, etc.) are available for selection.

Tape Playback

During playback Press and hold or until the desired passage is located. T1 or T2 with 11 or 22" scrolling left or right will be displayed depending on which button is pressed. During searching, the sound is reduced to a low volume. When you release or , the tape continues playing.

PLAY/ REC

Notes: If you do not intend to record via the microphone, unplug the microphone to avoid accidental mixing with other recording source. For recording, use only tape of IEC type I (normal tape). The tape is secured at both ends with leader tape. At the beginning and end of tape, nothing will be recorded for six to seven seconds. The recording level is set automatically, regardless of the position of VOLUME, Incredible Surround or DSC. To prevent accidental recording, break out the tab on the left shoulder of the tape side that you want to protect. If "CHECK TAPE" is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the opening.
Recording the mixed sound / One Touch Recording
During microphone mixing, you can record the mixed sound on a tape in tape deck 2 except dubbing mode. For One Touch Recording, as soon as you press RECORD, the current source (VCD, TUNER or AUX) will be recorded on tape deck 2.
1 Load a blank tape in tape deck 2. 2 Press RECORD to start recording.

The REC starts flashing.

3 Press to stop recording.
Note: When you press RECORD while in TAPE mode, "SELECT SOURCE" will be displayed. One Touch Recording is not possible in TAPE mode.
deck 2) The REC starts flashing.
1 Press TAPE ( TAPE 12 ) to select tape deck 2. 2 Load the prerecorded tape into tape deck 1 and

a blank tape into tape deck 2 with full spool to the left. 3 Press DUBBING. "DUB" with "2" scrolling right will be displayed. Dubbing will start immediately. The REC starts flashing. 4 Press to stop dubbing. Notes: At the end of side A, flip the tapes to side B and repeat the procedure. Dubbing of tapes is only possible from tape deck 1 to tape deck 2. To ensure good dubbing, use tapes of the same length. You can switch to other source while dubbing.
4 Press to stop recording.
Notes: During recording, it is not possible to listen to another source.
VCD/CD Synchro Start Recording 1 Load a blank tape into tape deck 2 and a disc

into a disc tray.

2 Press VCD to select VCD/CD mode.
You can programme the tracks in the order you want them to be recorded (see Programming Tracks). If not, select the disc by pressing VCD (CD 123) and the tracks are recorded according to the order on the selected disc. 3 Press RECORD to start recording. The REC flag starts flashing. Disc will start playback automatically. 4 Press to stop recording.
Recording from other sources

(only on tape deck 2)

1 Load a blank tape into tape deck 2 with the

open side downward.

2 Press VCD, TUNER or AUX.
Start playback of the selected source.
Microphone Mixing 1 Set the MIC LEVEL control to the minimum
level to prevent acoustic feedback (e.g. a loud howling sound) before you connect the microphone. Connect a microphone to the MICROPHONE socket. Press VCD, TUNER, TAPE or AUX. Play the selected source. Adjust the volume level with VOLUME control. Adjust the MIC LEVEL control to the mixing level that you want. Start singing or talking through the microphone. Note: Keep the mic away from the speakers to prevent howling 28/05/2001, 09:03 AM 115 20823
Dubbing tapes (from tape deck 1 to tape
3 Press RECORD to start recording.

View Clock

You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (VCD, TUNER, etc.). The clock will be displayed for about seven seconds. Press CLOCKTIMER briefly (on the system only). 10:38 PM or 22:38 (the current time) will be displayed depending on whether you have selected 12- or 24-hour mode. --:-- will be displayed if the clock is not set.

Clock Setting

The clock can be set in either 12- or 24-hour mode, e.g. 12:00 AM or 00:00. Before setting the clock, you must be in the View Clock mode.

Timer is not working.

Clock setting is erased. System displays features automatically;buttons flash continuously. All lighted buttons are not lit.

Mini Hi-Fi System with 3VCD MP-3 CD Changer, 1000 Watts PMPO, Logic Deck
1000 watts PMPO 2 x 20 watts RMS PAL / NTSC Super Error Correction 9 Screens Preview Resume, A-B repeat Sound Navigation via Jog Digital Sound Control (optimal, jazz, rock, techno) 2-way Magnetically Shielded Speaker System MP3-CD Playback Plays CD, CD-R and CD-RW discs FM/MW Digital Tuning with 40 presets Dual Logic Tape Deck with Auto Replay Bedroom Clock with Wake-up Alarm and Sleep-timer 42-key Remote Control 4-Color Packaging

AUX TUNER TAPE /2

V D D 23
standard product information amplifier 1000 watts PMPO 2 x 20 watts RMS, 10% THD, 6 Ohm, 1 kHz Sound Navigation 4 Digital Sound Control Dynamic Bass Boost compact disc player 3 CD Changer MP-3 CD Playback Plays CD, CD-R and CD-RW discs Digital servo technology Bit-check D/A converter 99-Tracks CD Random Program Play modes (repeat/program) Change 2 disc while playing 1 loudspeaker boxes 2-way Bass Reflex 5 1/4" Woofer 1" Polydome Piezo Magnetically Shielded (Front & Center Speakers) 6 Ohm connections Stereo headphones : 3.5mm stereo jack CDR/DVD-AUX, TC-AUX in : cinch type socket Video out : cinch type socket Karaoke mic : 3.5 mm jack
/21 /21M /22 /29 /30 /33 /34
Asia Pacific Australia/NZ Middle East/S Africa Latam Europe E Europe Mexico
FM87.5-108MHz MW522-1602kHz LW153-279kHz FM75 Ohm coaxial
tuner FM/MW Digital Tuning with 40 presets Plug & Play for easy installation of radio stations tape deck Dual Logic Tape Deck Auto Replay Normal speed dubbing CD synchro start recording Automatic recording level control Automatic tape type selection Electronic speed control and full auto stop
general 3 Display modes include Dim mode Demo mode Clock/Timer 2 timer modes (wake-up/sleep) Karaoke Features - Digital Echo (VCD only) - Vocal Fader (VCD only) - Tone Control (VCD only) 42-key Remote Control

mains supply

120/230V 50~60Hz 230V/50Hz

general

made in sticker
EAN: (/21M) Product Dimensions: 265 mm W x 310 mm H x 320 mm D (center unit) 210 mm W x 310 mm H x 235 mm D (speakers) Package Dimensions: 620 mm W x 410 mm H x 474 mm D Product weight: 15 kg Carton contains: CD Changer Mini System, Multi-Function Remote Control, Operating instructions, Warranty Information Printed in Singapore Date Printed : Sep 2000 Specifications subject to change without notice. 2000 Royal Philips Electronics N. V. All rights reserved. http://www.philips.com