Philips FW-V39-21M, size: 930 KB
Here you can find all about Philips FW-V39-21M like manual and other informations. For example: review.
Philips FW-V39-21M manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Philips FW-V39-21M please write about it to help other people.
[ Report abuse or wrong photo | Share your Philips FW-V39-21M photo ]
User reviews and opinions
|gerwulf||9:04am on Thursday, November 4th, 2010|
|Beautiful case, very well made So I am extremely anal and find fault with nearly everything I buy. Works for me. A nice case to protect your D2 This is a quality case.|
|Sandwalker||9:44pm on Sunday, October 24th, 2010|
|Exactly what I was looking for This offers me what I want - excellent quality audio playback on a small device. MP3 Player Having bought one of these for myself I purchased this one for my wife. It is a good little mp3 player and DAB/fm radio.|
|VioletRuth||7:15am on Sunday, September 26th, 2010|
|This is one great little player. Probably th... Very High Quality Audiophile Sound Design a little too box like If you use MACs, do not buy a COWON. It is j... player has great sound.|
|chyzer||12:47am on Wednesday, April 21st, 2010|
|Better than the first model case,.... This case uses the updated "clips" to hold the D2 in place. Cowon D2+ Cowon has consistently made the best sounding MP3 player over the past seven years that money can buy.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
VCD Mini Hi-Fi System
3 VCD Changer Mini System
Video CD Version 2.watts PMPO PAL/NTSC Playback control (Multi level menu control via TV screen) Super Error Correction 9 Screens preview Resume, A-B repeat Incredible Surround Digital sound control (optimal, jazz, rock, techno) Virtual Environmental Control (cinema, hall, concert) Dynamic bass boost 2-way Bass Reflex Magnetic-shield Speaker System with Detachable Grilles MP3-CD Playback Dual Logic Tape Deck with Auto Replay FM/MW Digital Tuning with 40 presets Subwoofer Ready Karaoke Feature Easy set for radio Bedroom clock with wake-up timer 42-key Remote Control
/ slee up
3 VCD Changer Mini System with Incredible Surround
standard product information
/21M /21 /22 /30 /33 /34 Asia Pacific
video CD player Video CD ver 2.VCD changer Super Error Correction Playback Control (PBC) Frequency range 20Hz-20kHz Signal-to-noise ratio 90dB amplifier 1200 watts PMPO 2 x 35 watts RMS, 10% THD, 6 Ohm, 1kHz Sound Navigation : jog shuttle Incredible Surround Digital Sound Control (optimal, jazz, rock, techno) Virtual Environment Control (cinema, hall, concert) Dynamic Bass Boost Signal Dependent Bass Control
loudspeaker boxes 2-way Bass Reflex 5.25" woofer 2.5" tweeter Detachable grilles Hyper energy bass port for deep powerful bass reproduction connections Stereo headphones : 3.5mm stereo jack Aux : cinch type sockets Subwoofer out : cinch type socket Karaoke mic : 3.5mm jack Video out : cinch type socket general 3 display mode incl. NITE mode Multicolor FTD display Clock/timer Wake-up with CD, tuner or tape 42-key Remote Control Karaoke Feature Digital Echo (CD only) Vocal Fader (CD only) Tone Control (CD only) Demo mode
Australia/NZ Middle East/S Africa Latam Europe E Europe Mexico
FM87.5-108MHz MW522-1602kHz LW153-279kHz FM75 ohm clickfit
120/230V 50~60Hz 230V/50Hz
made in sticker
compact disc player 3 VCD changer Bit-check D/A converter 99-track Audio CD or MP3-CD Random Program 40-track CD random program Play modes (repeat/program) CD repeat (track/disc) Change 2 discs while playing 1 MP3-CD Playback tuner FM/MW Digital Tuning with 40 presets Easy set/auto store for radio and clock tape deck Dual Logic Tape Deck CD synchro recording auto replay automatic recording level control automatic tape type selection
Super Error Correction
To ensure consistently good results when playing Video CD discs of all quality grades and conditions, Philips has introduced further improvements in the system's playability. These developments together are called Super Error Correction, a proprietary Philips technology optimising the system's ability to handle less-than-perfect discs with the minimum disturbance to normal playing. By effectively eliminating virtually all errors arising under normal playing conditions, Super Error Correction ensures that the picture quality as seen by the user is independent of disc play. the video encoding and processing during mastering of the disc, and the MPEG-1 decoding and video encoding in the signal processing stages, are now the only limiting factors for picture quality.
AUX TUNER TAPE 1/2
EAN: (/21M) Product Dimensions: 265mmW x 310mm H x 340mm D (center unit) 210mm W x 310mm H x 240mm D (speakers) Package Dimensions: 624mm W x 410mm H x 474mm D (/21M) 744mm W x 410mm H x 474mm D (/21K) Product weight: 15 kg (/21M), 18 kg (/21K) Carton contains: 3 VCD Mini System, Multi-Function Remote Control, Batteries (2 x AA), Operating instructions, Warranty information, FM antenna, AM antenna Printed in Singapore Date printed : Nov 1999 Specifications subject to change without notice. 1999 Royal Philips Electronics N.V. All rights reserved. Incredible Surround is a Trademark of Philips Consumer Electronics Company http: //www.philips.com
Video CD version 2.0
VCD Mini Hi-Fi System
6/8/01, 9:00 AM
Optimum disc playability : ensuring excellent picture quality Philips components and modules for the various CD applications have always enjoyed an excellent reputation in the market place for super disc playability - the ability to play discs which may be scratched, soiled or not fully according to the standard specification. This position has been underlined by tests showing the superior performance of the various Philips players, as well as by the positive experiences of millions of individual consumers around the world.
Constantly improving performance As the penetration of the CD system has increased, and new applications like CDROM and Video CD have become commonplace, Philips Components - as the CD technology inventor and as one of the major suppliers of CD player modules in the industry - has constantly improved the performance of its products. One of the ways in which this benefits users is by optimum disc playability. This is an important parameter for CD players other than CD Audio, and especially for the Video CD applications, because any loss of data from the disc will at best cause disturbances in the reproduced picture, and at worst can cause the player to lose track so that disc playing fails.
Presenting Super Error Correction To ensure consistently good results when playing Video CD discs of all quality grades and conditions, Philips has introduced further improvements in the system's playability. These developments together are called Super Error Correction, a proprietary Philips technology optimizing the system's ability to handle less-thanperfect discs with the minimum disturbance to normal playing. By effectively eliminating virtually all errors arising under normal playing conditions, Super Error Correction ensures that the picture quality as seen by the user is independent of disc play. The video encoding and processing during mastering of the disc, and the MPEG-1 decoding and video encoding in the signal processing stages, are now the only limiting factors for picture quality.
pg 01-28/V39/21-En 2
ErCoS is a registered trademark of Philips Electronics N.V.
English..4..29 Bahasa Melayu..53
CLASS 1 LASER PRODUCT
pg 01-28/V39/21-En 4 6/8/01, 9:00 AM
General Information.. 5 Safety Information.. 5 Preparation. 6 - 7 Controls. 8 - 10 Operating The System. 11 - 12 CD / VCD / MP3-CD. 13 - 18 Tuner.. 18 - 19 Tape.. 20 - 21 AUX/CDR.. 21 Karaoke.. 22 Recording.. 22 - 23 Clock... 24 Timer.. 24 - 25 Maintenance.. 25 Specifications.. 26 Troubleshooting. 27 - 28
IMPORTANT: PLEASE NOTE THAT THE VOLTAGE SELECTOR LOCATED AT THE REAR OF THIS SYSTEM IS PRESET AT 220V FROM THE FACTORY. FOR COUNTRIES THAT OPERATE AT 110V, PLEASE ADJUST TO 110V BEFORE YOU SWITCH ON THE SYSTEM.
Remote control Batteries (two AA size) for remote control AM loop antenna FM wire antenna AC power cord One Video cinch cable
Before operating the system, check that the operating voltage indicated on the typeplate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. If not, please consult your dealer. The typeplate is located at the rear of your system. When the system is switched on, do not move it around. Place the system on a solid base (e.g. a cabinet). Place the system in a location with adequate ventilation to prevent internal heat build-up in your system. Allow at least 10 cm clearance from the rear and the top of the unit and 5 cm from each side. Do not expose the system to excessive moisture, rain, sand or heat sources.
The type plate (which contains the serial number) is located at the rear of the system. Recording is permissible if copyright or other rights of third parties are not infringed.
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Under no circumstances should you repair the system yourself, as this will invalidate the warranty! If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens of the disc unit inside the system. Should this occur, the disc player will not operate normally. Leave the power on for about one hour with no disc in the system until normal playback is possible. Electrostatic discharge may cause unexpected problems. See whether these problems disappear if you unplug the AC power cord and plug it in again after a few seconds. To disconnect the system from the power supply completely, remove the AC power plug from the wall socket.
FM AERIAL 75
VOLTAGE VOLTAGE SELECTOR
AC MAINS ~ VIDEO OUT
E OFER L VEL CONTR OL
MIN CUT OFF FREQUENCY
HIGH POWER SUBWOOFER
A AM Loop Antenna Connection
Connect the supplied loop antenna to the AM ANTENNA terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception.
B FM Wire Antenna Connection
Connect the supplied FM wire antenna to the FM AERIAL (FM ANTENNA) 75 terminal. Adjust the position of the FM antenna for the best reception. Outdoor Antenna For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) 75 terminal using a 75 coaxial wire.
FM AERIAL 75 FM ANTENNA 75
CAUTION: For optimal sound performance, it is recommended to use the supplied speakers. Do not connect more than one speaker to any one pair of +/- speaker terminal. Do not connect speakers with impedance lower than the speakers supplied. Please refer to SPECIFICATION section of this manual.
Connect the optional active subwoofer to the SUBWOOFER OUT terminal. The subwoofer reproduces just the low bass sound effect (e.g. explosions, the rumble of spaceships, etc.). Be sure to follow the instructions supplied with the subwoofer.
After all other connections have been made, connect the AC power cord to the system and to the wall outlet.
F Connecting other equipment to your system
You can connect the audio left and right OUT terminals of a TV, VCR, Laser Disc player, DVD player or CD Recorder to the AUX IN terminals at the rear of the system.
Inserting batteries into the Remote Control
Insert the batteries (Type R06 or AA) into the remote control as shown in the battery compartment.
G Video Out Connection
Connect the VIDEO OUT terminal at the rear of the system to the TV or VCR VIDEO IN for viewing or recording.
D Rear Surround Speakers Connection
Connect the optional Rear Surround Speakers to the REAR SURROUND terminals. Be sure to follow the instructions supplied with the Rear Surround Speakers.
H Adjusting the Operating Voltage
(for specific version only)) Before connecting the AC power cord to the wall outlet, make sure that the voltage selector at the rear of the system is set to the local power line voltage. If not, reset the selector before connecting to the wall outlet.
C Speakers Connection
Connect the right speaker to Front terminal R, with the colored wire to + and the black wire to -. Connect the left speaker to Front terminal L, with the colored wire to + and the black wire to -. Clip the stripped portion of the speaker wire as shown.
To avoid damage from possible battery leakage, remove dead batteries or batteries that will not be used for a long time. For replacement, use type R06 or AA batteries.
6/8/01, 9:01 AM
E Subwoofer Out Connection
I AC Power Supply
VCD MINI HIFI SYSTEM
TUNER TAPE 1/2
VCD.CD 1/2/3 AUX
CD3 VCD PAL/NTSC
* ( )
PROGRAM RECORD DUBBING A.REPLAY
MICROPHONE - LEVEL
STOP CLEAR PLAY PAUSE PREV
PRESET v NEXT
7 ( & & ) 3
Controls on the system and remote control
1 STANDBY ON to switch the system on or to standby mode. to use for EASY SET. 2 DIGITAL SOUND CONTROL DISPLAY PANEL to view the desired DSC display. 3 DBB (DYNAMIC BASS BOOST) to switch on bass boost, to enhance bass response or to switch off bass boost. 4 VEC (VIRTUAL ENVIRONMENT CONTROL) to select the desired Virtual Environment Control effect : HALL, CINEMA or CONCERT. 5 DSC (DIGITAL SOUND CONTROL) to select the desired sound effect : OPTIMAL, JAZZ, ROCK or TECHNO. 6 JOG CONTROL to select the desired DSC setting. You must select the DSC feature first. to select the desired VEC setting. You must select the VEC feature first. 7 PROGRAM (PROG) for VCD/CD/MP3-CDto program disc tracks. for TUNER.. to program preset radio stations. for CLOCK.. to select 12- or 24hour in clock setting mode (on the system only). 0 ! @ # $ % ^ MICROPHONE to connect microphones jack. MIC LEVEL to adjust the mixing level for karaoke or microphone recording. RECORD to start recording on tape deck 2 only. DISPLAY SCREEN to view the current setting of the system. DISC CAROUSEL TRAY DISC CHANGE to change disc(s). OPENCLOSE to open or close the disc carousel tray. DISC 1 / DISC 2 / DISC 3 (DISC DIRECT PLAY) to select a disc tray for playback. SOURCE to select the following: VCD / (CD 123) to select VCD/CD mode (this system can playback MP3-CD format disc also). When VCD/CD playback is stopped, press to select the disc tray 1, 2 or 3. PAL / NTSC to select corresponding PAL or NTSC system of your TV set (exception Multi-system TV). TUNER / (BAND) to select Tuner mode. When in tuner mode, press to select the waveband: FM or MW. TAPE / (TAPE 1 2) to select Tape mode. When tape playback is stopped, press to select either tape deck 1 or 2. AUX / (CDR/VIDEO) to select sound from an external source (e.g. TV, VCR, Laser Disc player, DVD player or CD Recorder). & MODE SELECTION SEARCHTUNING (ALBUM -/+) + for MP3-CD onlyto select previous/ next Album at stop mode for VCD onlyto move the zoomed picture to the left or right. for VCD/CD/MP3-CDto search backward/forward during playback. for TUNER.. to tune to a lower or higher radio frequency. for TAPE. to rewind or fast forward on tape. for CLOCK.. to set the hour (on the system only). STOPCLEAR for VCD/CD/MP3-CDto stop disc playback or to clear a program. for TUNER.. to stop programming. for TAPE. to stop playback or recording on tape deck 2 only. for DEMO. (on the system only) to start or stop demonstration mode. PLAYPAUSE for VCD/CD/MP3-CDto start or interrupt playback. for VCD onlyto watch a still picture. for TAPE. to start playback. PREV / NEXT (PRESET 43 ) (TITLE -/+) + for MP3-CD onlyto select previous/ next Title. for VCD onlyto move the zoomed picture down or up. for VCD with PBC on.. to select next or previous MENU.. to select next or previous VCD track during playback. for VCD/CD. to skip to the previous, or next track. for TUNER.. to select a preset station in memory. for CLOCK.. to set the minute (on the system only). * DIM to select different brightness for the display screen : DIM 1, DIM 2, DIM 3 or DIM OFF. ( VOLUME to increase or decrease the volume. ) INCREDIBLE SURROUND to switch on or off the surround sound effect.
n to connect headphones. CLOCKTIMER to view the clock, set the clock or set the timer. RETURN for VCD with PBC on to return to the previous MENU level during playback (for VCD version 2.0 only). PBC (PLAYBACK CONTROL) to switch on or off PBC mode (for VCD version 2.0 only). A. REPLAY (AUTO REPLAY) to select playback mode either in continuous AUTO REPLAY or ONCE only. DUBBING to dub a tape in normal speed. TAPE DECK 2 TAPE DECK 1 OSD (ON SCREEN DISPLAY) to switch on or off the on screen display on the TV screen. ZOOM to enlarge a still picture on the TV screen (for VCD operation only). VOCAL to fade out the vocal of the original song during VCD playback or to switch between mono or stereo mode during audio disc playback (for VCD operation only). KEY CONTROL ( I i ) to change the key to suit your vocal range (for VCD operation only). I.. to decrease vocal key level. .. to restore vocal key to original setting. i. to increase vocal key level. ECHO -/+ to adjust the echo level for karaoke (for VCD operation only). RESUME to continue playback again from where you have stopped. Only when PBC mode is switched off (for VCD operation only). SLOW to watch a VCD at a slower speed. There are 3 modes of selection (for VCD operation only). A-B to playback a certain scene or passage of a VCD/CD repeatedly. DIGEST to scan through a VCD or a particular track. There are 4 modes of selection (for VCD operation only). REPEAT to repeat a disc track or the current disc. DIGIT (numbers consisting more than two figures must be keyed in within 2 seconds.) for VCD with PBC on. to select an entry level. for VCD/CD/MP3-CDto key in a disc track to start playback or.. to select another track during playback or.. to select a track for programming. B to switch the system to standby mode.
Notes for remote control: First select the source you wish to control by pressing one of the source select keys on the remote control (e.g. VCD, TUNER, etc.). Then select the desired function (, , , etc.).
OPERATING THE SYSTEM
EASY SET allows you to store all available radio stations automatically.
CD3 VCD PAL/NTSC BAND TUNER
Press VCD, TUNER, TAPE or AUX. You can also switch on the system by pressing any one of the DISC DIRECT PLAY buttons. You can also switch on the system by pressing the OPENCLOSE or DISC CHANGE button.
Important: Before you operate the system, complete the preparation procedures.
IS On On On
VOLUME ADJUSTMENT Adjust VOLUME to increase or decrease the sound level. For Personal Listening Connect the headphones plug to the n socket at the front of the system. The speakers will be muted.
DIM OFF - normal brightness with Spectrum Analyzer On
To switch off DBB Press DBB again. The DBB button light is switched off. DBB OFF will be displayed. The DBB flag disappear from the display.
INCREDIBLE SURROUND Normal stereo sound is determined by the distance between the front speakers. When Incredible Surround is switched on, it magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect.
Press INCREDIBLE SURROUND to switch on. The INCREDIBLE SURROUND button lights up. INC SURR and the INCR. SURR flag will be displayed. To switch off Incredible Surround Press INCREDIBLE SURROUND again. The INCREDIBLE SURROUND button light is switched off. IS OFF will be displayed. The INCR. SURR flag disappear from the display.
DIM 1 - normal brightness with Spectrum Analyzer Off
DIGITAL SOUND CONTROL (DSC) The DSC feature enables you to enjoy special sound effects that have preset equalizer settings, providing the best music reproduction.
1 Press to select the DSC feature. 2 Adjust JOG CONTROL to select OPTIMAL, JAZZ, ROCK or TECHNO. The Digital Sound Control display panel will light up respectively. OPTIMAL, JAZZ, ROCK or TECHNO and the respective flag will be displayed.
Note: Some CDs or tapes might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume. VIRTUAL ENVIRONMENT CONTROL (VEC) The VEC feature enables you to adjust the system to select a type of environment.
1 Press to select the VEC feature. 2 Adjust the JOG CONTROL to select the desired Virtual Environment Control setting : HALL, CINEMA or CONCERT. "HALL, CINEMA or CONCERT" and the respective flag will be displayed.
DIM 2 - half brightness with Spectrum Analyzer On
Note: When OPTIMAL sound is selected, DBB will be switched on automatically.
CD / VCD / MP3-CD
DISC 1 DISC 2 DISC 3
3 CD ROTARY CHANGER SYSTEM MP3-CD CD REWRITABLE COMPATIBLE PLAYBACK CD SYNCHRO RECORDING
This system can playback all audio CD, finalized audio CD-Recorder and MP3-CD format discs.
Note: For mixed mode discs, only one mode will be selected for playback depending on the recording format.
Warning! 1) This system is designed for conventional Discs. Do not use any accessories such as disc stabilizer rings or disc treatment sheets, etc., which may damage the disc mechanism. 2) Do not load more than one disc into each tray. 3) When the disc changer is loaded with Discs, do not turn over or shake the system. This may jam the changer.
The CD part of this system also serves as a Video CD player if you connect it to your TV set. You can load up to three discs in the disc changer for continuous playback without interruption. Before viewing the Video CD, ensure that the set is switched to corresponding PAL or NTSC system of your TV set (exception Multi-system TV).
Loading the Disc Changer
Notes: To ensure good system performance, wait until the disc changer completely reads the disc(s) before proceeding. For MP3-CD, the disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.
1 Press VCD to select VCD/CD mode. 2 Press OPENCLOSE. The disc carousel tray slides out. 3 Load a disc with the printed side up in the right tray. You can load another disc in the left tray. To load the third disc, press the DISC CHANGE button. The disc carousel tray will rotate until the empty tray is ready for loading. Playback will always start with the disc in the inner disc tray.
Disc Direct Play
You can play a disc directly by pressing the DISC 1, DISC 2 or DISC 3 button.
Discs for playback
4 Press OPENCLOSE to close the disc carousel tray. The total number of tracks and the playing time of the last selected disc appear on the display. For MP3-CD only: The first Album and the first Title information appear on the display.
Playing a normal disc
For normal VCD: Ensure that the system is switched to the corresponding PAL or NTSC system of your TV set (except multisystem TV).
1 Press PLAY to start playback. The disc tray, track number and elapsed playing time of the current track appear on the display. To interrupt playback, press PAUSE . The playing time flashes. To resume playback, press PLAY again. 2 To stop playback, press.
Note: Program cannot be used for VCDs when PBC is switched on. Switch off PBC before storing tracks from such a VCD.
1 Load the desired discs in the disc trays. 2 Press the VCD (CD 123) button to select the disc tray. Programming can only be done on the selected disc. 3 Press PROGRAM to start programming. The PROG flag starts flashing. It will cancel any previously programmed tracks and selected repeat mode. 4 Press or (or digit 0-9 on the remote control) to select the desired track. For MP3-CD, press ALBUM -/+ + and TITLE -/+ to select the + desired Album and Title for programming.
Notes: For MP3-CD, total playing time will not be shown. If the total playing time is more than 99:59 then --:-- appears on the display instead of the total playing time. During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.
Reviewing the program
Reviewing of program is possible only when playback is stopped. 1 Press or repeatedly to review the programmed tracks. 2 Press to exit review mode.
Note: If you press any other DISC DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be cleared.
Erasing the program (when
playback is stopped) Press. PROGRAM CLEARED will be displayed. Note: The program will be erased when the system is disconnected from the power supply. The system is switched to standby mode when you change source or when you change the program disc.
5 Press PROGRAM to store the track. Repeat steps 4 to 5 to store other tracks. 6 Press once to end programming. The total number of tracks programmed and total playing time appear on the display.
Playing the program
Repeat (only on remote control)
CD / VCD / MP3-CD VIDEO CD
Adjusting the TV System
Before viewing the Video CD, ensure that the set is switched to corresponding PAL or NTSC system of your TV set (exception Multi-system TV). Press and hold PAL/NTSC for more than 2 seconds to switch between PAL or NTSC TV system. After TV system is selected, the set will automatically switch to the last TV system setting everytime the VCD source is selected. SINGLE ELAPSED PLAY XX/TT MM:SS
Notes: "XX" is the current track. "TT" is the total tracks. "MM" is in minutes. "SS" is in seconds.
When OSD is switched off; there is no information indicated on the TV screen.
Note: If a menu consists of more than one page, it is possible to go through the pages with PREV./NEXT on the set or remote control.
Switching off PBC It is possible to switch off PBC in STOP mode by pressing the PBC button. Now this VCD can be treated like a normal VCD. The TV display will show < PBC OFF >.
This feature is also applicable to audio CD (except for MP3-CD). 1 Press to stop playback. 2 Press RESUME on the remote control to start playback again from where you have stopped. "RESUME" appears on the display.
Playing a Video CD with PBC
VCDs with PBC (Play Back Control) will be indicated on the display of the set and on your TV screen as soon as they are inserted. PBC is a predefined play sequence stored on the VCD. 1 Switch on the TV, insert a VCD with PBC and press to start playback. 2 MENU appears on the TV screen. If a menu consists of a list of titles you can select a sequence directly. 1 Select your choice with the digit keys 0 - 9 on the remote control. The VCD starts playing of the selected sequence automatically. 2 Press RETURN ( ) to go back to the previous menu.
Note: Before adjusting the TV system, make sure that there is not MP3-CD in disc tray 1 during power up.
Notes: In PBC mode PROGRAM is not active. The MENU structure depends on the program stored on the VCD. Please refer to the information supplied with the disc.
Note: Resume information is lost if you select another disc or the set is disconnected from the mains, the system is switched to standby mode or when you change source. Resume is not available when PBC mode is switched on.
1 Press to have a still picture on the TV screen. "PAUSE" appears on the TV screen. 2 Press again to continue playback.
OSD - On Screen Display
If you insert one or more VCDs/CDs, your TV screen will serve as an additional display for messages (e.g. PLAY, STOP), and information stored on the VCD/CD. Press OSD on the remote control repeatedly to switch ON or OFF. When OSD is switched ON; you can see the following display on the TV screen. Below is an example of the OSD message.
1 Press SLOW on the remote control to watch a VCD in a slow speed. There are 3 types of slow modes to select. "SLOW 1" , "SLOW 2" or "SLOW 3" appears on the TV screen. 2 Press again to resume playback at normal speed.
Note: Audio is muted during Pause.
Note: Audio is muted in Slow mode.
This feature enables you to view a still picture frame in an enlarge mode. After you have pressed to have a still picture on the TV screen. 1 Press ZOOM once to enlarge the still picture by 2 times. "ZOOM" appears on the TV screen. You can move the zoom picture left or right by pressing or respectively. You can move the zoom picture down or up by pressing or respectively. 2 Press ZOOM once more to return to normal still frame. 3 Press again on the remote control to continue playback.
1. INTRO SCAN 2. DIGEST DISC 3. DIGEST TRACK
Notes: You can also cancel A-B Repeat by pressing or. You can only repeat a maximum of one track. Once it cross from one track to the next, the A-B marking is reset.
4. EXIT DIGEST MENU
This feature allows you to fade out the original vocal from a karaoke VCD. This feature is used together with Echo mode. You can also use it to select the different audio modes. STEREO same effect as the original recorded disc. STEREO VOCAL LEFT/RIGHT fade out the original vocal for special recorded Karaoke disc only (with the ECHO mode switched on). MONO LEFT/RIGHT select the language on a bilingual VCD. Ensure that Echo mode is switched on when press VOCAL to fade out the original vocal during STEREO VOCAL LEFT/RIGHT mode. Pressing VOCAL repeatedly allows you to select the following modes. STEREO STEREO VOCAL LEFT STEREO VOCAL RIGHT MONO LEFT MONO RIGHT STEREO
Press RETURN to return to the previous VCD disc MENU level. It is functional only for Video CD when PBC is switched on.
This feature allows you to scan through a VCD for a quick review. PBC mode must be switched off. There are four digest mode for selection. 1 Press DIGEST. "DIGEST" appears on the display. "1.INTRO SCAN" , "2.DIGEST DISC" , "3.DIGEST TRACK" and "4.EXIT DIGEST MENU" appear on the TV screen.
This feature is also applicable to audio CD (except for MP3-CD). To play a certain scene or passage of the disc repeatedly. 1 Press A-B on the remote control during playback to mark the start of the chosen scene or passage. "SET A" appears on the display. 2 Press A-B again to mark the end of the chosen scene or passage. "SET B" appears on the display. The selected scene or passage is played repeatedly. "PLAY AB" appears on the display.
Press digit 1 on the remote control to select "INTRO SCAN". The first 10 seconds of each track are played. Press digit 2 on the remote control to select "DIGEST DISC". The first frame of each track appears on the TV screen. Press digit on the remote control to playback the desired tracks. Press or to view the previous or next page for additional information. Press digit 3 on the remote control to select "DIGEST TRACK". The first track of the selected disc will be divided into 9 parts and displayed on the TV screen. Press digit on the remote control to playback the desired parts. Press or to digest the next track. 2 Press digit 4 on the remote control to select "EXIT DIGEST MENU". Digest mode will be exited.
3 Press A-B once more to return to normal playback. "CLEAR AB" appears on the display.
This feature allows you to add echo while singing or talking through a microphone. Press ECHO -/+ to decrease or increase the echo effect. "ECHO -" or "ECHO +" appears on the display.
TUNER MP3 Disc
This feature allows you to view and select the next or previous MP3-CD Album when playback is stopped. Press ALBUM -/+ ( or ) to scroll through the previous or next Album name until the desired Album appears on the display. The selected Album will appear on the display and follow by "AXX TXXX".
Key Control ( I i )
This feature allows you to change the key of your vocal range. Press I to decrease vocal key level. "KEY DOWN" appears on the display. Press i to increase vocal key level. "KEY UP" appears on the display. Press to restore vocal key to original setting. "KEY FLAT" appears on the display.
This feature allows you to view and select the next or previous MP3-CD Title when playback is stopped. Press TITLE -/+( or ) to scroll through the previous or next Title name until the desired Title appears on the display. The selected Title will appear on the display and followed by "AXX TXXX".
Note: For 'EASY SET' feature, please refer to page 11.
Tuning to radio stations
1 Press TUNER (BAND) to select TUNER mode. TUNER will be displayed. A few seconds later, the current radio frequency will be displayed. 2 Press TUNER (BAND) again to select the desired waveband : FM or MW. 3 Press or for more than one second, then release. The display will show SEARCH until a radio station with sufficient signal strength is found. Repeat this procedure until the desired station is reached.
To tune to a weak station, briefly press or repeatedly until the display shows the desired frequency and/or when the best reception has been obtained.
Note: "A" represents ALBUM and "T" represents TITLE, "XX" or "XXX" is the current selected Album or Title number.
Note: You are advised to put echo to the minimum level when you are not using the feature. Echo mode is switched off when echo is at the minimum level.
You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER (BAND). 2 Press PROGRAM for more than one second. The PROG flag starts flashing and AUTO will be displayed. The system will search for every available station in the FM waveband first, then search the MW waveband. All available stations will be stored automatically. The frequency and preset number will be displayed briefly. The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. The system will remain tuned to the last stored preset radio station.
Press 4 or 3 to select the desired preset number. The preset number, radio frequency, and waveband appear on the display.
(for specific version only) The frequency step can be changed if necessary. In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz. In other parts of the world, it is 9 kHz. The frequency step preset in the factory is 9 KHz. For MW Band To change from 9 kHz to 10 kHz or vice versa Changing of tuning grid will erase all previously stored preset stations.
1 Disconnect the system from the AC power supply (pull out the AC power cord). 2 Press and hold TUNER and TUNING while reconnecting the system to the AC power supply. Display will show GRID 10 or GRID 9.
Repeat steps to store other preset radio stations.
Notes: You can cancel the automatic programming by pressing PROGRAM or (on the system only). If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming, only the preset numbers 10 to 40 will be programmed.
Notes: When 40 radio stations are stored and you attempt to store another radio station, the display will show "PROGRAM FULL. If you want to change an existing preset number, repeat steps 3 5. You can cancel manual programming by pressing (on the system only). During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.
You can view the clock (if it is set) if the system is in Standby mode or when any sound source is selected (VCD, TUNER, etc.). The clock will be displayed for about seven seconds. Press CLOCKTIMER briefly. "10:38 PM or 22:38" (the current time in either 12- or 24-hour mode) will be displayed depending on whether you have selected 12- or 24-hour mode. "--:--" will be displayed if the clock is not set.
The clock can be set in either 12- or 24hour mode, e.g. "12:00 AM" or "00:00". Before setting the clock, you must be in the View Clock mode. 1 Press CLOCKTIMER to select clock mode. 2 Press PROGRAM to select 12- and 24hour mode. If 12-hour mode is selected, "12:00" starts flashing and the AM lights up. If 24-hour mode is selected, "00:00" starts flashing. 3 Set the hour with or on the system. 4 Set the minute with or on the system.
Notes: During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically. When a power interruption occurs, the clock setting is erased.
6/8/01, 9:02 AM
5 Press CLOCKTIMER to store the start time. The timer is now set. The TIMER flag remains on the display. At the preset time, the timer will be activated. The selected source will be played. To switch off the TIMER 1 Press and hold CLOCKTIMER for more than 2 seconds. 2 Press on the system to cancel the timer. The timer is now switched off. The display will show "CANCEL" and the TIMER flag disappears. To start the TIMER again (for the same preset time and source) 1 Press and hold CLOCKTIMER for more than 2 seconds. 2 Press CLOCKTIMER again to store the start time. The timer is now on. The TIMER flag appears on the display.
Cleaning the Cabinet Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records. Cleaning the disc lens After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
Notes: During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. If the source selected is TUNER, the last tuned frequency will be switched on. If the source selected is VCD, playback will begin with the first track of the disc tray 1 or other trays if disc tray 1 is empty. If all the disc trays are empty, the TUNER will be selected instead. The timer will not activate if a recording is in progress.
Alarm F-15-F-5 C2660WF1 ESF4159 Reign 2 Finepix A345 UE40C7000WW Axim X3 Thermo Chef KTN4252SD Afti 22 SDX-330 BM 2000 G-50A Freespace 2 KE-P42xs1 Impressa E50 ZDC240 4345MFP PSR-420-PSR-320 AX-400 Satellite 2520 KX-TG2700 Gigaset C450 Meter SW80010-M BES860XL W7600 W ECM717 Connect MCM279 System BC 575 Omnibook 4150 CQ-RX400N MCM277 AX2TVD69GT 71-46 DGS-2205 NV-GS24 BA-200 Yamaha M-60 Napishtim GK1630TK BD350 EP-70 AVH-P5250BT Roland GR-1 KDL-26P3020 CAR 2002 DIR-855 Delice 37LC46 42LG5000 91 LV HT-Z210 KX-TG1311SA VGN-A417S Astra AVR-1802 Version 2 RX-V457 Satellite 4010 Review Kd-ar370 MRT-3 S-W80S SGH-T359 Voip 321 Infocus IN82 MS9307C CDP-C365 WM2077CW DJM-1000 WM-EX9 Explorer 300 Phone DVD-P350H 81302 Dublin C31 Sony SRW1 Yamaha MD4 FP920 AJL308 Manager Digitech RP55 Coolpix 880 V9180SE TD TX-32LX50F Taurus-1998 X-55A FS-1920 DK9923P Mf250-MF350 PS1300 1200I FWF393 X1160 SRT2027 HDR-FX1E RC-06
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101