Philips Mini Hi-Fi System

FWD570

CHANGER
DVD and WMA-MP3-CD Playback
The FWD570's potent mix of a powerful Mini Hi-Fi System with DVD playback is guaranteed to thrill you. Immerse yourself in the dynamic sounds of this powerful system and have another great reason to stay home!
Enrich your movie experience 3 DVD Changer DTS Digital Surround for multi-channel surround sound Dolby Pro Logic II for surround sound from stereo sources Longer listening, greater enjoyment Play DVD, DivX, (S)VCD, MP3-CD, WMA-CD, CD(RW) & Picture CD Dual Logic Tape Deck with auto replay Impressive power and bass 3-way Speaker System with MAX bass port 2x100W RMS with 3300W Peak Music Power Output Extensive sound features MAX Sound for instant power boost Digital Sound Control for optimized music style settings Virtual Ambience Control provides simulated sound settings

Mini Hi-Fi System

FWD570/21M

Product highlights

& Play) Station presets: DVD changer DTS Digital Surround DTS delivers superior surround sound with your DVD movies. Dolby Pro Logic II Surround Dolby Pro Logic II is an advanced matrix decoder that derives five channels of surround sound, including two full-range surround channels, from any stereo source. Play DVD/DivX & MP3/WMA-CD Dual Logic Tape Deck 3-way spk sys with MAX port 2x100W RMS/ 3300W PMPO MAX Sound MAX Sound technology produces an instant boost in bass, maximizing volume performance and instantly creating the most impressive listening experience with just the touch of a button. Its sophisticated electronic circuitry calibrates existing sound and volume settings, instantly boosting bass and volume to maximum levels without distortion. The end result is a noticeable amplifying of both sound spectrum and volume and a potent audio boost that will add mileage to any music. Digital Sound Control Digital Sound Control offers you a choice of pre-set Jazz, Rock, Pop and Classic controls you can use to optimise the frequency ranges for different musical styles. Each mode uses graphic equalizing technology to automatically adjust the sound balance and enhance the most important sound frequencies in your chosen music style. Ultimately, Digital Sound Control makes it easy for you get the most out of your music by precisely adjusting the sound balance to match the type of music you are playing. Virtual Ambience Control Virtual Ambience Control (VAC) creates a virtual sound environment which digitally mimics the acoustic characteristic of special rooms or environments such as concert halls, the cinema, arcades, discos, etc. By realistically recreating the sound ambience of these different settings, VAC will dramatically enhance your enjoyment of your favorite music.

Specifications Sound

Output Power: 3300W PMPO Sound Enhancement: MAX Sound, Digital Sound Control 4 modes, Virtual Ambience Control, Game Sound, MIX-IT

Connectivity

Loudspeakers
Main Speaker: 3 way, Bass Reflex Speaker System, 6.5" woofer, 2" tweeter, 1" polydome piezo

Video Playback

Playback Media: DVD, DVD+RW, DivX, Video CD, Picture CD Disc Playback Modes: A-B Repeat, Disc Menu, OSD, Fast Forward, Fast Backward, Slow Forward, Slow Backward, Search forward/ reverse, Resume Playback from Stop, Repeat, Chapter repeat, Still Picture, Angle, Zoom Loader Type: Motorised Number of Discs: 3
Headphone: 3.5 mm Microphone: Microphone socket Other connections: Composite video (CVBS) out, Component Video out Interlaced, S-Video out, Subwoofer out, FM Antenna, MW Antenna, Digital output (cinch), DIN prepared for 5.1. upgrade, Line out Aux in: Aux in, Gameport

Convenience

Audio Playback
Alarms: CD Alarm, Radio Alarm, Sleep timer, Tape alarm, Wake to favourite track Display Type: FTD Eco Power Standby: 1 watt Indications: album number, DIM mode, sound titles, time, track Karaoke: Echo control, Key control, MIC volume
Cassette Deck Technology: Full Logical Cassette Playback Modes: Fast Wind/Rewind, Automatic Stop Playback Media: CD, CD-R, CD-RW, MP3-CD, WMA Disc Playback Modes: Repeat/one/all/program, Fast Forward/Backward, Next/Previous Album Search, Next/Previous Track Search, 99-Track Programmable Compression format: Dolby Digital, DTS Number of decks: 2

Accessories

Included Accessories: AC Power Cord, AM antenna, Audio/Video cable, Batteries for remote control, FM antenna, Quick start guide, Remote Control, User Manual, Component video cable (R/G/B) Standard Package Includes: International Guarantee

Dimensions

Audio Recording
Recording Media: Tape Tape Recording Enhancement: CD Synchro Start Recording
Tuner/Reception/Transmission
Set dimensions (W x H x D): 265 x 322 x 346 mm Main speaker dimensions (W x H x D): 242 x 310 x 240 mm Packaging dimensions (W x H x D): 624 x 412 x 510 mm Weight incl. Packaging: 17.5 kg
Auto digital tuning Tuner Bands: FM Stereo, MW Tuner Enhancements: Auto Store, Easy Set (Plug
Power supply: 100-240VAC, 50/60Hz Standby power consumption: <1 W
Issue date 2009-02-12 Version: 7.0.8
2009 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com
12 NC: 11784 EAN: 80143 0

Programing favorite tracks. 25 Changing discs during playback.. 26 Special DVD/VCD features.. 26~28
Changing subtitle language Changing sound track language Searching for a particular passage Displaying the disc information during playback Moving to another title (track) / chapter Playing from a selected point Playing in slow motion mode Zooming in Viewing from another angle Advancing by frames Setting Speaker Checking the contents of DVD
Step 4: Connecting FM/MW antennas. 13 Step 5: Connecting the power cord.. 13 Step 6: Connecting a VCR or cable/satellite box... 14 Step 7: Connecting digital audio equipment. 14 Step 8: Connecting to game console. 14

Functional Overview

Controls on the system.. 15~16 Remote control.. 16~17
Special VCD/SVCD features.. 28

Playback control (PBC)

Basic Functions
Plug and Play (for tuner installation). 18 Demonstration mode.. 18
MP3/ WMA/DivX/ Picture Disc Operations
Playing MP3/ WMA/ Picture disc (Kodak, JPEG)... 29 Playing DivX disc.. 30

Preparations

Step 1: Inserting batteries into the remote control... 19 Step 2: Setting the clock.. 19~20 Step 3: Setting the TV set.. 20 Step 4: Setting speakers. 21 Step 5: Setting language preference. 21

DVD Menu Operations

Using the menu bar.. 31 Using the setup menu.. 32~36
Setting the TV shape Setting the screen saver Setting the digital output Setting the PCM output Night mode - turning on/off Test Tone DivX(R) VOD Changing the password Restricting playback by setting parental level

Game Operations

Preparation before use.. 22 Starting Operation.. 22

Tuner Operations

Tuning to radio stations. 37 Presetting radio stations.. 37~38
Automatic preset programming Manual preset programming
Specifications.. 46 Troubleshooting.. 47~48 Glossary.. 49
Selecting a preset radio station.. 38 Deleting a preset radio station Changing tuning grid.. 38

Tape Operation/Recording

Tape playback.. 39 General information on recording.. 39 Preparation for recording.. 40 Disc synchro recording.. 40

Clock/Timer Operations

Viewing clock.. 41 Setting the timer.. 41~42 Viewing timer.. 42 Setting the sleep timer.. 42
Sound and Volume Controls

Sound control... 43

Selecting surround sound MAX sound Selecting sound effect

Volume control... 43

Changing the volume level Switching off the volume temporarily Listening through headphones

Other Functions

Switching on/off.. 44
Switching the system on Switching the system to standby mode Switching to eco power standby mode Power saving automatic standby

Using S-Video In jack Use the S-Video cable (not supplied) to connect the systems S-VIDEO OUT jack to the SVideo input jack (or labeled as Y/C or S-VHS) on the TV set. To listen to TV channels through this system, use the audio cables (white/red) to connect AUX IN jacks to the corresponding AUDIO OUT jacks on the TV set. IMPORTANT! If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator Use the composite cable (yellow) to connect the systems VIDEO jack to the video input jack on the RF modulator. Use the RF coaxial cable (not supplied) to connect the RF modulator to your TVs RF jack. 12
Step 4: Connecting FM/MW antennas

MW antenna FM antenna

fix the claw into the slot
Step 5: Connecting the power cord
COMPONENT VIDEO IN AUDIO OUT S-VIDEO IN Pr/Cr

~ AC MAINS

Pb/Cb VIDEO IN Y
Connect the supplied MW loop antenna to the MW jack. Place the MW loop antenna on a shelf or attach it to a stand or wall. Connect the supplied FM antenna to the FM jack. Extend the FM antenna and fix its end to the wall. For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA terminal.
After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connection with the power switched on. On the DVD Mini Hi-Fi System AUTO INSTALL-PRESS PLAY may appear on the display panel. Press 2; on the front panel to search and store all available radio stations or press 9 to exit (See page 37, Tuner OperationsPresetting radio stations). If your system is equipped with a Voltage Selector, set the VOLTAGE SELECTOR to the local power line voltage.

VOLTAGE SELECTOR

110V~127V

220V~240V

Notes: Adjust the position of the antennas for optimal reception. Position the antennas as far as possible from your TV set, VCR or other radiation sources to prevent unwanted interference.
Step 6: Connecting a VCR or cable/satellite box
COMPONENT VIDEO IN Pr/Cr Pb/Cb Y
Step 7: Connecting digital audio equipment

S-VIDEO AUDIO OUT

VIDEO IN
Recording (digital) Connect the systems DIGITAL OUT jack to the DIGITAL IN jack on a digital recording device (DTS-Digital Theater System compatible, with a Dolby Digital decoder, for example). Before operation, set the DIGITAL OUTPUT according to the audio connection. (See Using the Setup Menu Setting the digital output).

8 DEMOSTOP 7

for DISC.. to stop playback or to clear a programme. for DEMO. (in Standby or ECO power mode) to activate/deactivate demonstration. for PLUG&PLAY. (on the system only) to exit plug&play mode.

2 DISPLAY SCREEN

3 SOURCE

9 MAX SOUND

to activate or deactivate MAX sound. to display disc information during disc playback. to view or to set clock. to view or to set timer.
0 DISPLAY ! CLOCK @ TIMER # TAPE DECK 1/ 2 $ 0 OPEN
to open the tape deck door. to select continuous playback in either AUTO PLAY or ONCE mode only. to start recording on tape deck 2. use a video cable to connect to your game consoles video output AUDIO L./ AUDIO R. use an audio cable to connect to your game consoles left/right audio output. - to select various sound effect. SURROUND - to select various surround sound effect. AUDIO - to select the preferred language for audio - to select AUDIO channel in karaoke mode. MIX IT - to mix the game sound with your favorite music from one of the music sources (DISC, TUNER, TAPE1/2 or AUX) GAME - to select different type of equaliser setting for Gameport (SPEED, PUNCH or BLAST). GAME SOUND - to adjust the games output volume level.
4 PREV / PRESET / NEXT O P

% AUTO REPLAY ^ RECORD

& VIDEO

5 SEARCHTUNING 1 /

(ALBUM / +) for DISC.. to search backward/forward. to select previous/next album in MP3/WMA stop mode (with MENU ON). for TAPE. to rewind or fast forward. for TUNER.. to tune to a lower or higher radio frequency. for CLOCK. to set the minute.

* SOUND

6 MIC VOL./ MIC IN
to adjust the mixing level for karaoke or microphone recording. to connect microphone jack. for DISC.. to start or interrupt playback. for TAPE. to start playback. for PLUG&PLAY. (on the system only) to initiate plug & play mode.

(PLAY/PAUSE)

to connect headphones. to increase or decrease the volume. point the remote control towards this sensor. to show the VU (volume unit) meter in music or volume mode depending on the display mode selected.

Remote control

) VOLUME
SENSOR INTERACTIVE VU METER

DISC TRAYS OPENCLOSE

to open or close the disc tray. to select a disc tray for playback. to change disc(s).

$ % ^ & * ( )

DISC1/ DISC2/ DISC3 DISC CHANGE
Notes: First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or TUNER, for example). Then select the desired function (, O or P for example).

1 SOURCE

to select the relevant active mode: DISC1/2/3, TUNER, TAPE1/2 or AUX/GAME. TUNER: toggles between FM and MW band. AUX/GAME: toggles between AUX and GAMEPORT mode. to enter or exit the disc contents menu. to enter or exit the system menu bar. to select movement direction in disc contents menu/system menu bar. to tuner mode, to tune to lower or higher radio frequency. (1 / )
2 DISC MENU (disc mode only)
3 SYSTEM MENU (disc mode only) 41 // 5 / 4
in Disc mode, press to fast reverse/forward the disc. in Disc mode, press to skip to the previous/next chapter/track. in Tuner mode, to select a preset radio station number to start or interrupt disc playback. to resume playback from last stop point. to stop playing the disc. to select variations of continuous playback. to repeat a specific section on a disc. to select desired subtitle. to select the audio channel. to switch to eco power or standby mode. to enter a track/title number of the disc. to enter a number of preset radio stations. adjust the volume level. adjust key control/ ECHO level in karaoke mode. adjust speakers level in speaker setting mode. to exit or confirm the selection. to go direct to desired title, chapter or time. in disc mode, to program favorite tracks. in tuner mode, to program favorite stations. to playback in random mode. to adjust the echo level in karaoke mode. to change the tone level to suit your vocal range. to view the time, title or chapter information. to interrupt or resume sound reproduction. 17
to select different brightness for VFD. to activate or deactivate MAX sound. to select various sound effect. to view clock/ timer. to enter timer setting mode. to select various surround sound effect. to set the sleep (auto-off) timer function.

5 O/ P

MAX SOUND CLOCK/TIMER

6 PLAY/PAUSE 2;

7 STOP REPEAT 9 REPEAT A-B 0 SUBTITLE ! AUDIO @ POWER 2 # Numeric Keypad (0-9) $ VOL +/-

SURROUND SLEEP

% OK ^ GOTO & PROGRAM * SHUFFLE ( ECHO ) KEY DISPLAY (OSD) MUTE
Plug and Play (for tuner installation)
Plug and play allows you to store all available radio stations automatically.

Demonstration mode

The system has a demonstration mode that shows various features offered by the system. Activating demonstration In Standby or ECO power mode, press and hold DEMOSTOP 7 for more than 5 seconds to activate demo mode. DEMO ON is displayed. Demonstration will begin. Deactivating demonstration Press and hold DEMOSTOP 7 on the system until DEMO OFF is displayed. The system will switch to Standby mode. Note: Even if you remove the AC power cord and reconnect it to the wall socket, the demonstration will remain off until you activate it again.

4 If you like to mix your game sound to your

VIDEO OUT L R AUDIO OUT

1 Connect your game consoles video and audio
output to the GAMEPORT video and audio inputs respectively (See Connecting to game console).
favorite music, press MIX IT to select the desired music source: DISC, TUNER, TAPE, AUX or OFF. DISC : MIX-DISC TUNER : MIX-TU TAPE : MIX-TAPE AUX : MIX-AUX OFF : MIX-OFF Notes: - To change the disc tray, you have to press DISC, then press DISC1/2/3 to select the desired disc tray. - If MIX-TU is selected, press TUNER button to select FM or MW band. - If MIX-TAPE is selected, press TAPE button to select TAPE 1 or TAPE 2.
2 Connect your TVs video input to the VIDEO
OUT on the rear panel of the system.
3 Connect all the AC power cord to the power

outlet.

5 If necessary, start playback of your chosen mixer

source.

6 Start playing your favourite game.
To adjust the game consoles volume level Adjust GAME SOUND. Notes: - You can only activate GAME SOUND and MIX IT while in the game source mode. - If your game console is switched on, the video image will always appear on the TV even though you are not in the gameport mode.
IMPORTANT! This system is designed for regular discs.Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism. Do not move the system during playback. Doing so may damage the system. Do not push on the disc tray or put any object other than disc on the disc tray. Doing so may cause the system to malfunction. DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc matches the regional code of your player. According to the format requirement of DVD or VCD, some operations may be different or restricted. READING DISC will be displayed. In the stop mode, press DISC 1/2/3 on the remote control repeatedly to select DISC 1, DISC 2 or DISC 3 cyclically.
Some discs can play automatically. For discs with Table Of Contents, a menu may appear on the TV screen. When the menu is displayed, press 1 / / 5 / 4 keys to highlight your selection and press OK to confirm. To select a play option, press numeric keys (0-9). If a disc menu shows on the TV screen, see Using the Disc Menu. If the disc is locked by parental control, you must enter your four-digital password (See Changing the password).
5 Press 38 to start playback.
For MP3/ DivX/ WMA Load an MP3/ DivX/ WMA disc in the disc tray. MENU ON will be shown on the display. Press DISC MENU to select menu on/off. In menu off mode, playback will start from the first track. Notes: Load discs with the label side facing up. To ensure good system performance, wait until disc reading is completed before proceeding.

Playing discs 1 Press ECO POWER/ STANDBY ON 2 to
switch on the system, and then press DISC to select disc mode.
2 Power on the TV system and set to the correct
Video In channel (See Setting the TV set). You should see the blue Philips DVD background screen on the TV set.
3 Press OPEN/CLOSE to open the disc tray and
load a disc respectively in the first two disc trays. To load the third disc, press DISC CHANGE. The disc tray will rotate until the empty tray is ready for loading. Make sure the disc label is facing up. For double-sided discs, load the side you want to play facing down.

Using the disc menu

For disc with Table Of Contents, a menu may appear on the TV screen once you load the disc. To select a playback feature or item Press 1 / / 5 / 4 or numeric keys (0-9) on the remote control, then press 38 or OK to start playback. To access or remove the menu Press DISC MENU on the remote control.

CD CHANGER

VOLUME

. TIMER CLOCK

CD TAPE RECORD TIMER SET DUBBING BAND SHUFFLE TIMER

SHUFFLE FMMW SWLW STEREO

RECORD PROGRAM PLAY FRONT DBB MODE BACK PROGRAM HSD AMPM TIMER SET CLOCK

SIDE RDS MODE PRESET

4 Press OPENCLOSE to close the disc tray.

Basic playback controls

To play discs in all the disc trays Press 38. All the available discs will play once, then stop. During playback, the selected disc tray, elapsed playing time of the current track will appear on the display. To start playback from a selected disc tray Press DISC 1, DISC 2 or DISC 3. To interrupt playback Press 38. To resume playback, press 38 again. To stop playback Press 7. Skipping to another title (track) / chapter Press O or P on the front panel or on the remote control repeatedly during playback to skip backward or forward. Each press will take the disc to the beginning of the previous or next title (track) / chapter. Note: If the player has been set to repeat chapter (track), pressing this button will replay the same chapter (track) from its beginning. To go directly to any title (track) / chapter Use the numeric keys (0-9) to enter the number of the desired title (track) / chapter. Fast search
To cancel the resume mode Press 7 again, or go into STANDBY, ECO POWER, POWER OFF or press OPEN/ CLOSE key. Notes: Resume information will be erased if you have changed the disc, opened the disc tray, changed source or disconnected the system from the power supply. Resume function is not available in PBC ON mode. This function is not available for MP3/WMA disc.

1 Load the desired discs on the disc trays. 2 Press the DISC button to select the disc tray.
Programming can only be done on the selected disc.
3 While playback is stopped, press PROGRAM
to enter program mode. P 00 : 00 is displayed.
3 Press 38 to start shuffle play.
In shuffle playback mode: Press P button to select another track in a shuffle order.
4 Use the numeric keys (0-9) to input the track
number in the order you want. If you attempt to program more than 99 tracks, FULL is displayed.
4 Press 9 to stop shuffle playback.
To cancel Shuffle mode: In stop mode, press SHUFFLE repeatedly to select SHUFFLE OFF. Notes: In Tuner,Tape or AUX/GAME mode, this button does not function. When the disc tray is opened, the Shuffle function will be cancelled automatically. In the Shuffle playback mode, the system only supports the same disc format. This function is only available for CD or VCD (PBC OFF).
5 Press OK to store the track. Repeat steps 3-5 to store other tracks. 6 Press 38 to play the program. 7 To stop playback, press 7 once. 8 To exit the program mode, press 7 again.
Note: This function is not available for DVD or MP3/ WMA discs.
Changing discs during playback 1 Press DISC CHANGE.
The disc tray will open without interrupting playback.
For CVD, SVCD,VCD or CD (reverse): FR X1 p FR X2 p FR X3 p FR X4 p PLAY (forward): FF X1 p FF X2 p FF X3 p FF X4 p PLAY
2 To change the inner disc, press DISC
CHANGE again. The active disc will stop playing and the disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible.
3 To resume normal play, press 38.
Displaying the disc information during playback In disc mode, press DISPLAY repeatedly to select the following display information:
DVD VCD (PBC ON) SINGLE ELAPSED 00:20:01

Special DVD/VCD features

Changing subtitle language This operation only works on DVDs with multiple subtitle languages. Press SUBTITLE to select the desired language. Changing sound track language This operation only works on DVDs with multiple audio languages. Press AUDIO to select the desired language. For CVD/SVCD/VCD: Press AUDIO to select the desired audio channels for sound. This function is only available for discs recorded with different channels: LEFT VOCAL p RIGHT VOCAL p MONO LEFT p MONO RIGHT p STEREO Note: If your desired language is not set in the disc, you cannot select the language via this function. Searching for a particular passage
TITLE 01/06 CHAPTER 05/19 00:20:01

TITLE REMAIN 00:01:15

SINGELE REMAIN 00:01:15

CHAPTER ELAPSED 00:20:12

CHAPTER REMAIN 00:30:45
Moving to another title (track) / chapter Some discs may contain more than one title or chapter. If the disc has a title or chapter menu recorded on it, you can start playback from the selected item. Press GOTO on the remote control to display the message of title and chapter, use 1 or to highlight an item. title/chapter number.

2 Use numeric keys (0-9) to select a desired 3 Press OK to start playback.
Note: Selecting a title or chapter might not be possible on certain discs.
1 Press 1 or on the system (or on the
remote control) to select fast reverse search or fast forward search respectively.
2 Press 1 or on the system (or on the
remote control) repeatedly to select the required search speed: For DVD or MP3/ WMA (reverse): FR X2 p FR X4 p FR X6 p FR X8 p PLAY (forward): FF X2 p FF X4 p FF X6 p FF X8 p PLAY 26
Playing from a selected point This function allows you to start playback at any chosen time on the disc. For DVD IMPORTANT! Some operations may be different or restricted according to the disc format. Refer to the jacket or case of the disc you are playing. Note: When you press a button and appears on the TV screen, this means the function is not available on the current disc or at the current time. Playing in slow motion mode
1 Press GOTO twice to activate time menu. 2 Enter hours, minutes and seconds from left to
right in the time edit box using the numeric keys (0-9). Each time an item has been entered, the next item will be highlighted.
3 Press OK to start playback. 4 Press GOTO to activate time menu, GOTO -- : 5 Enter minutes and seconds from left to right in
the time edit box using the numeric keys (09). Each time an item has been entered, the next item will be highlighted. -- will be displayed on the TV screen. For CVD, SVCD,VCD or CD

For DVD

1 Select
6 Press OK to start playback.
Notes: In repeat disc or repeat all mode, you can search a desired time point. This function is not available for MP3/ WMA disc. Some operations can be carried out directly via the menu bar on the TV screen without interrupting disc playback.
from the menu bar and press 4 repeatedly to select the required slow motion speed: SF X 1/2 p SF X 1/4 p SF X 1/8 p SR X 1/2 p SR X 1/4 p SR X 1/8 p PLAY SF = slow forward SR = slow reverse For CVD, SVCD or VCD
1 Press 4 to select the required slow motion
speed: (forward): SF X 1/1 p SF X 1/2 p SF X 1/3 pPLAY
2 Press 38 to cancel the slow function.
Note: This function is not available for CD or MP3/ WMA disc. Zooming in This function allows you to enlarge the picture on the TV screen and pan through the enlarged image.

1 Press SYSTEM MENU.

The menu bar will be displayed across the top of the TV screen.

2 Press 1 or to select:

SETUP MENU p SLOW p ZOOM p ANGLE p STEP p PBC p SPEAKER SETTING
3 Press 4 to select the highlighted icon and press
5 / 4 to select your preferred option.
4 Press OK to confirm a highlighted selection. 5 To exit, press SYSTEM MENU.

from the menu bar and press 4 repeatedly to change the following zooming scale: ZOOM X1.5 pZOOM X2 pZOOM X4 pZOOM OFF SYSTEM MENU to exit and press 1 / / 5 / 4 buttons to move the zoomed picture left, right, up or down. from the menu bar. Viewing from another angle If the playing DVD disc is recorded with multiple camera angles , the ANGLE mark on the setup page will be set to ON automatically. This allows you to view the picture from different angles. Angle selection is determined by the disc format.
from the menu bar and press 4 to select subwoofer level, rear level, center level or OFF. from -7dB to +8dB. Checking the contents of DVD
2 Press VOL -/+ keys to adjust the speakers levels
2 To pan through the enlarged image, press
1 Press DISC MENU on the remote control.
If the current title has a menu, the menu will appear on the screen. Otherwise, the disc menu will be displayed.
3 To exit ZOOM mode, select ZOOM OFF
2 Press 1 / / 5 / 4 to select the desired
title or chapter, and then press 38 or OK. Playback start from the selected title or chapter. Press and hold DISC MENU on the remote control to go to root menu of the disc.
Note: If no title menu or root menu is recorded in the DVD disc, pressing this button will restart playback from the first track.
Special VCD/SVCD features
Select from the menu bar and press 5 / 4 buttons to select the desired angle: 1/4, 2/4, 3/4 or 4/4. Playback changes to the selected angle. Advancing by frames
Playback control (PBC) PBC playback allows you to play Video CD interactively, following the menu on the display.
Select PBC from the menu bar and press 4 to toggle between PBC ON and PBC OFF. Playing a disc with PBC function If PBC OFF, the system will start playback automatically. If PBC ON, the PBC menu (if available) will appear on the TV screen for selection. Use the numeric keys (0-9) to enter your choice. Note: This function is not available for CD or MP3/ WMA disc.
from the menu bar and press 4 to play the disc step by step (one frame each step).
Note: This function is not available for CD or MP3/ WMA disc. Setting Speaker

SPEAKER SETTING

6 Press 5 / 4 to highlight the movie file, and 7
press OK to confirm. The playback will start accordingly. During playback, you can zoom the picture by selecting zoom icon from the menu bar and press 4 to select ZOOMX2 or ZOOM OFF. Notes: - During playback, press SUBTITLE button on remote control to select available font: SUBTITLE 1/1, ENCODING LATIN 1, ENCODING LATIN 2, ENCODING CYRILLIC, SUBTITLE OFF. - If an external subtitle has been selected, the DivX embedded subtitle will be deactivated. - This model supports LATIN 1, LATIN 2, and LATIN CYRILLIC fonts. - LATIN 1 font supports the following languages: Albanian, Basque, Catalan, Danish, Dutch, English, Faeroese, Finnish, German, Icelandic, Irish, Italian, Norwegian, Portuguese, Rhaeto-Roamanic, Scottish, Spanish, Swedish, Afrikaans and Swahili. - LATIN 2 supports the following languages: Bosnian, Croatian, Czech, Hungarian, Polish, Romanian, Serbian, Serbo-Croatian, Slovak, Slovenian, Upper Sorbian and Lower Sorbian. - LATIN CYRILLIC font supports the following languages: Russian, Ukrainian and Belarusian. - Subtitle files with the following filename extension are supported:.sub,.srt and.smi.

Playing DivX disc

There are two types of subtitle available on DivX disc: embedded subtitle and external subtitle.

1 Load a DivX disc.

The DATA CD MENU appears on the TV screen.
When playing DivX disc with embedded subtitle
2 Press 5 / 4 to select DivX Movie, and then
press OK to start playback.
3 When playing disc, press SUBTITLE button on
the remote control to select: SUBTILTE 1/8 p SUBTILTE 2/8 p SUBTILTE 3/8 p SUBTILTE 4/8 p SUBTILTE 5/8 p SUBTILTE 6/8 p SUBTILTE 7/8 p SUBTILTE 8/8 p SUBTILTE OFF. Note: - The maximum number of subtitle languages stipulated by the manufacturer is 8/8. When playing DivX disc with external subtitle Press 5 / 4 on the remote control to select an external subtitle option. Press SUBTITLE to select subtitle file. - DivX SUBTITLE SELECTED appears on the TV screen.

Using the menu bar

You can continue some operations directly via the menu bar on the TV screen without interrupting the disc playback. But when you enter (SETUP MENU), the playback will pause.

Slow Motion The slow motion speed will display. Press 4 repeatedly to select a reverse or forward slow motion speed. To cancel the slow function, press 2;. ZOOM Press 4 repeatedly to select an enlarged picture ratio: 1.5, 2 or 4. You can press 1 / / 3 / 4 to move within the enlarged picture on the TV set. To resume normal playback, repeat the above step to select ZOOM OFF. ANGLE Press 4 to view the same scene from different angles if the DVD is recorded with multiangles. STEP Press 4 repeatedly to play forward the disc step by step (one frame every step). To cancel the step function, press 2;. PBC PBC Press 4 to select PBC ON or OFF, and then playback will stop automatically. (This function is not available for CD or MP3 discs.) SPEAKER SETTING Press 4 to select subwoofer level, rear level , center level or OFF cyclically. Press VOL -/+ keys to adjust its levels from -7dB to +8dB. x
1 In disc mode, press SYSTEM MENU.
The menu bar will appear across the top of the TV set screen.
2 Press the 1 / / 5 / 4 on the remote
control to navigate in the menu. Press 1 / to move through the menu bar. Press 4 to enter the selection.
3 Press OK to confirm the selection.
Playback will resume or begin automatically. To remove the menu Press SYSTEM MENU or OK. IMPORTANT! Some operations may be different or restricted according to the disc format. Refer to the jacket or care of the disc you are playing.
Using the setup menu (user preference settings)
This DVD setup is carried out via your TV set, enabling you to customize the DVD Mini Hi-Fi System to suit your particular requirements.
Setting the TV shape Make sure the format you need is available on the disc. If not, your setting will be invalid.
4:3 PS (Pan and Scan mode) Select this if you have a conventional TV set and your DVD is not formatted for wide screen viewing. A wide picture will display on the whole TV screen with a portion automatically cut off. 4:3 LB (Letterbox mode) Select this if you have a conventional TV set and your DVD is formatted for wide screen viewing. Black bars appear on the upper and lower portions of the TV screen. 16:9 (Wide-screen TV) Select this if you have a wide-screen TV set (you must also set your wide screen TV to full size).
The menu bar will appear across the top of the TV screen.
icon and press 4 to enter the setup menu. Then press 3 / 4 to select one of the setup menu options and press to enter the menu. Playback will pause.

SETUP MENU

STEP XX K appears. Note: All preset stations will be lost and need to be reprogrammed.
5 After selecting an address number, press
PROGRAM again to store the radio station. Repeat steps 3-5 to store other preset radio stations. To stop storing the manual preset Press 7 on the system. Note: If you attempt to store more than 40 preset radio stations, FULL will be displayed.
Selecting a preset radio station
In tuner mode, press O / P or use the numeric keys (0-9) to select the desired preset number. The preset number, radio frequency, and waveband are displayed. Deleting a preset radio station
1 Press O or P to select the preset radio station

to be erased.

2 Press 7 on the system, PRESET DELETED
appears on the display. The preset numbers of all other preset radio stations in the band with higher numbers are also decreased by one. Repeat steps 1-2 to erase other preset radio stations.
IMPORTANT! Before playing a tape, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism. Store tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV set or speaker). Rewinding or forwarding fast when playback is stopped
1 Press 1 or on the front panel or on the

remote control.

2 Press 7 when you reach the desired passage.
Resetting tape counter number In stop mode, press 7.
Tape playback 1 Press 0 to open the tape deck door. 2 Insert a recorded tape and close the tape door.
Load the tape with the open side down and the full spool to the left.
General information on recording
If you dont intend to record via the microphone, unplug it to avoid unwanted recording source. For recording, only use tape of IEC type I(normal tape). The recording level is set automatically, regardless of the position of the Volume, Vocal, Key control and so forth. The type is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for seven seconds.
3 Press TAPE (TAPE 12) or TAPE1/2 on the
remote control repeatedly to select tape deck 1 or tape deck 2. The selected tape deck number is displayed.
To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.
4 Press 38 to start playback.
Stopping playback Press 7. Changing the playback mode Press AUTO REPLAY repeatedly to select: ONCE, AUTO REPLAY. The default setting is ONCE. AUTO REPLAY. the tape will rewind automatically at the end of playback and replay. It will replay up to max. 10 times or until you press 9. ONCE.. the selected side will be played once.
Press REC in Disc, Tape, Tuner or AUX/Game mode, CHECK TAPE will scroll on the display if there is no recordable tape in tape deck 2.

40 IMPORTANT! Recording is permissible if copyright or other rights of third parties are not infringed upon. Recording is possible only in tape deck 2.
Preparation for recording 1 Load a recordable tape into tape deck 2 with
the full spool to the left.
2 Prepare the source to the recorded.
DISC load the disc(s) TUNER tune to the desired radio station. TAPE load the prerecorded tape into tape deck 1 with the full spool to the left. AUX/GAME connect external equipment. When recording is in progress
1 Press DISC, TAPE,TUNER or AUX/GAME

to select the source.

2 Start to play the selected source. 3 Press REC to start recording.
To stop recording Press 9 on the system.
Disc synchro recording 1 Press DISC to select the disc.
You can record programmed tracks in the order you want.
2 Press REC to start recording.
REC will flash, but the first 7 seconds of the start passage will not be recorded. Selecting another track during recording
1 Press 2;. 2 Press O or P to select another track.
To stop recording Press 9. Recording and disc playback will stop simultaneously.

Viewing the clock

The clock (if it is set) will be shown in Standby mode. Press CLOCK on the system to view clock in any source mode (or press CLOCK/ TIMER on the remote control). Press DISPLAY on the system to select 12hour or 24-hour mode. If the clock has not been set, --:-- will blink until you set the clock. Setting the clock - see page 19.
The selected source will be displayed.
2 Press DISC,TUNER or TAPE (1/2) to select
timer mode. The corresponding source will appear on the display. DISC - load the disc. TUNER - Tune to the desired radio station. TAPE 1 - Load the prerecorded tape into tape deck 1.
3 Press O or P on the system or remote control

to set hours.

Setting the timer
The system can switch to DISC, TUNER, TAPE mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT ! Before setting the timer, ensure that the clock is set correctly. The timer will always be switched on once set. The timer will not start if a recording is in progress. The volume of the timer will increase gradually from the minimum level to the last tuned volume level. The time can be set in 24-hour mode.
4 Press 1 or on the system or remote
control to set the minutes.
5 Press TIMER or CLOCK/TIMER to store the
setting. TIMER ON will be displayed for 3 seconds. The timer will start to work. The timer will always be switched on once it has been set.
1 Press and hold TIMER or CLOCK/TIMER for