RC2573GRDFU

# 3135-xxx-xxxxx

08/02/02

Institutional Television www.philipsitv.com www.philipsitv.com

New Master Setup Remote

Directions For Use
Guest / Setup Mode Switch

Guest Mode

REPLACES / FULLY INTERCHANGEABLE WITH RG4172BK MASTER SETUP REMOTE

Setup Mode

Alpha / Soft Keys RG4172BK (Black)

RC2573GR (Green)

2-AA Cells Required

3135-xxx-xxxxx

RC2573GR DFU
Philips Institutional TV Software Philips Institutional Televisions can be configured to operate in either "Consumer" or "Commercial" operational modes. Commercial Mode: Philips Institutional Televisions are typically configured at the Factory to operate in Commercial mode. When the television is in Commercial mode, access to its operation from its front panel controls or from a guest-mode remote can be limited, depending upon the settings of the Institutional TV features. For examples, the units front panel controls can be locked-out (rendered inoperable), only certain channels can be selected, and/or the volume can be limited to a given range. Consumer Mode: When in the Consumer mode, the unit operates as a standard TV, bypassing the Institutional Television feature set, thus allowing normal initial power ON, channel selection, and volume control (as well as a variety of selectable Menu features). When the TV is in Consumer mode, Philips RC-5 system 0 (guest-mode) remotes, such as the RC2524BK and the RL9820BK (optional accessories) can access the Consumermode Main Menu, and configure the television to the full extent offered in this mode. Guest-mode 21-button remotes such as the RC2524BK use the Menu button to access the Consumer menu. Guest-mode 20-button remotes such as the RL9820BK, which do not have a Menu button, use the Sleep button to access the Consumer menu. Simultaneously pressing the front panels Volume - and Volume + buttons also invokes the Consumer menu. Identifying the Operational Mode: To identify the televisions operational mode, a system 7 (commercial setup mode) master setup remote (optional accessory, RG4172BK or RC2573GR) must be used. First, place the setup remote in setup mode. To place the the RG4172BK in setup mode, press TV SETUP. To place the the RC2573GR in setup mode, set the switch to the TV SETUP position. Then press Recall. Television status information similar, but not necessarily identical to the following will appear on-screen. NOTE: THE ACTUAL STATUS SCREEN WILL VARY DEPENDING UPON THE MODEL AND MANUFACTURE DATE OF THE SPECIFIC PHILIPS INSTITUTIONAL TELEVISION.
STATUS ITEM SYSTEM STATUS (LO1ITV-US4PV) MODE CHANNEL DCM CODES SIGNAL OP HRS COMMERCIAL / CONSUMER CHANNEL, INPUT (CHANNEL, INPUT) OFF / ON STATUS DATA Information title Operational mode Currently-tuned channel / input Data Communications Module offline / online Internal data for factory / service use. Valid signal present / absent Number of cumulative hours unit has been in operation (hexadecimal). Internal data for factory / service use. Television microprocessor software version. MEANING

TUNED / NOT TUNED 0031h

ERRORS VERSION
Changing Operational Modes: To change the televisions mode between Consumer and Commercial modes, a system 7 (commercial setup mode) master setup remote must be used. With the RG4172BK in setup mode (press TV SETUP on the RG4172BK, or set the switch to the TV SETUP position on the RC2573GR), enter the following keystroke sequence: Menu. Only the RG4172BK, when it is in setup mode can change the televisions mode between Consumer and Commercial, and provide complete access to the televisions Institutional Features. The RG4172BK / RC2573GR can be set to operate in either its master setup remote mode, or in guest-mode. The RG4172BK / RC2573GR guest mode facilitates testing the desired Institutional / Commercial configuration. IMPORTANT NOTE: If you change the operational mode, you must power the television off and back on to complete the mode change. Once the television is in consumer mode, do not use the setup remote to activate commercial features. Otherwise, the commercial features will affect consumer operation. It will then be necessary to place the television back into commercial mode, then into consumer mode, and then powered off again to properly place the television back into consumer mode. Accessing The Philips Institutional Television Menu Regardless of the operational mode in which the Philips Insitutional Television has been placed, its control settings and features can be accessed by placing the RG4172BK / RC2573GR setup remote in setup mode and pressing the M (menu) button. If the television is in Commercial Mode, the Institutional features will be accessible. On the following page, a typical late-model menu is shown. The specific items contained in the menus of your Philips Institutional television will vary depending upon the operational mode and the model and manufacture date of the specific Philips Institutional television. Using The Setup Remote With Other Philips iTV Products Your RG4172BK / RC2573GR setup remote is used with and/or required for a variety of other Philips Institutional Television products and accessories, including Philips Institutional Televisions, SmartLoader Clone Boxes (RL9820BK / CLON99BK), and Philips iTV SmartCards (Net1Card, Net3Card, etc.). Please consult the documentation for the respective television or accessory products with which the RG4172BK / RC2573GR is to be used.

The following table summarizes the Commercial and Consumer menu items available on a typical late model Philips Institutional television, and is intended merely to be representative of the types of items and features in the two modes. The column labeled CONSUMER indicates the Main Menu items that are available when the television is in Consumer mode, and Menu or Sleep is pressed on a guest-mode remote (or RG4172BK/RC2573GR master setup remote in guest mode). The column labeled COMMERCIAL indicates the Setup Menu items available with the RG4172BK / RC2573GR master setup remote whenever the setup remote is in setup mode. NOTE: The specific items contained in the menus of your Philips Institutional television will vary depending upon the operational mode and the model and manufacture date of the specific Philips Institutional television.
MENU ITEM (MENU TITLE) LANGUAGE CHANNEL INSTALL CABLE TUNING BRIGHTNESS COLOR CONTRAST SHARPNESS TINT NOISE REDUCTION SOUND MODE SAP AUDIO OUT BALANCE TREBLE BASS INCRED STEREO AVL VOLUME BAR MIN VOLUME MAX VOLUME SWITCH ON VOLUME SWITCH ON CHANNEL POWER ON CHANNEL DISPLAY KEYBOARD LOCK ESP AUDIO/VIDEO MUTE EXT AUD / VID OUT WELCOME MESSAGE CHANNEL GUIDE REMINDER 3 DIGIT ENTRY A/CH A/V SWITCH CC SAVE CC V-CHIP MENU ITEM SAVE V-CHIP V-CHIP SETUP SLEEPTIMER SECURITY EXIT SETTINGS / OPTIONS SETUP MENU / MAIN MENU ENGLISH/ESPANOL/FRANAIS > ON/OFF ---|--- 31 ---|--- 31 ---|--- 31 ---|--- 31 ---||--- 0 ON/OFF MONO / STEREO OFF / NO SAP / ON FIXED / VARIABLE ---|--- 0 ---|--- 31 ---|--- 31 ON / OFF ON / OFF ON / OFF |------ 0 ------| 63 ---|--- 31 / STANDARD Ch. 1-125 / FRONT / AUX / S-VIDEO / CVI / STANDARD STANDARD / FORCED NUMBER / LABEL / ALL / NONE ON / OFF 1-99 / OFF OFF / BLACK / BLUE ON / OFF > POWER ON/OFF/ON ON / OFF ON / OFF ON / OFF OFF/CC-1/CC-2/CC ON MUTE ON / OFF ON / OFF ON / OFF > OFF/15/30/45/60/90/120/180/240 STANDARD/HIGH > COMMERCIAL SETUP MENU x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x CONSUMER MAIN MENU x x x x x x x x x x x x x x x x

Institutional Television www.philipsitv.com www.philipsitv.com

New Master Setup Remote

Directions For Use
Guest / Setup Mode Switch

Guest Mode

REPLACES / FULLY INTERCHANGEABLE WITH RG4172BK MASTER SETUP REMOTE
Setup Mode (DCM mode not used)
Alpha / Soft Keys RG4172BK (Black)

RC2573GR (Green)

2-AA Cells Required

3135-xxx-xxxxx

RC2573GR DFU

# 3135-xxx-xxxxx

08/12/02
Philips Institutional TV Software Philips Institutional Televisions can be configured to operate in either "Consumer" or "Commercial" operational modes. The master setup remote is required to identify and set these modes. The master setup remote is also required for using or configuring other iTV products and accessories. Commercial Mode: Philips Institutional Televisions are typically configured at the Factory to operate in Commercial mode. When the television is in Commercial mode, access to its operation from its front panel controls or from a guest-mode remote can be limited, depending upon the settings of the Institutional TV features. For examples, the units front panel controls can be locked-out (rendered inoperable), only certain channels can be selected, and/or the volume can be limited to a given range. Consumer Mode: When in the Consumer mode, the unit operates as a standard TV, bypassing the Institutional Television feature set, thus allowing normal initial power ON, channel selection, and volume control (as well as a variety of selectable Menu features). When the TV is in Consumer mode, Philips RC-5 system 0 (guest-mode) remotes, such as the RC2524BK and the RL9820BK (optional accessories) can access the Consumermode Main Menu, and configure the television to the full extent offered in this mode. Guest-mode 21-button remotes such as the RC2524BK use the Menu button to access the Consumer menu. Guest-mode 20-button remotes such as the RL9820BK, which do not have a Menu button, use the Sleep button to access the Consumer menu. Simultaneously pressing the front panels Volume - and Volume + buttons also invokes the Consumer menu. Identifying the Operational Mode: To identify the televisions operational mode, a system 7 (commercial setup mode) master setup remote (optional accessory, RG4172BK or RC2573GR) must be used. First, place the setup remote in setup mode. To place the the RG4172BK in setup mode, press TV SETUP. To place the the RC2573GR in setup mode, set the switch to the TV SETUP position. Then press Recall. Television status information similar, but not necessarily identical to the following will appear on-screen.
STATUS ITEM SYSTEM STATUS (LO1ITV-US4PV) MODE CHANNEL DCM CODES SIGNAL OP HRS COMMERCIAL / CONSUMER CHANNEL, INPUT (CHANNEL, INPUT) OFF / ON STATUS DATA Information title Operational mode Currently-tuned channel / input Data Communications Module offline / online Internal data for factory / service use. Valid signal present / absent Number of cumulative hours unit has been in operation (hexadecimal). Internal data for factory / service use. Television microprocessor software version. MEANING

TUNED / NOT TUNED 0031h

ERRORS VERSION
NOTE: THE ACTUAL STATUS SCREEN WILL VARY DEPENDING UPON THE MODEL AND MANUFACTURE DATE OF THE SPECIFIC PHILIPS INSTITUTIONAL TELEVISION. Changing Operational Modes: To change the televisions mode between Consumer and Commercial modes, a system 7 (commercial setup mode) master setup remote must be used. Only a setup remote in setup mode can change the televisions mode between Consumer and Commercial, and provide complete access to the televisions Institutional Features. The RG4172BK / RC2573GR can be set to operate in either its master setup remote mode, or in guest-mode. With the RG4172BK in setup mode (press TV SETUP on the RG4172BK, or set the switch to the TV SETUP position on the RC2573GR), enter the following keystroke sequence: Menu. The RG4172BK / RC2573GR guest mode facilitates testing the desired Institutional / Commercial configuration. IMPORTANT NOTE: If you change the operational mode, you must power the television off and back on to complete the mode change. Once the television is in consumer mode, do not use the setup remote to activate commercial features. Otherwise, the commercial features will affect consumer operation. It will then be necessary to place the television back into commercial mode, then into consumer mode, and then powered off again to properly place the television back into consumer mode. Accessing The Philips Institutional Television Menu Regardless of the operational mode in which the Philips Institutional Television has been placed, its control settings and features can be accessed by placing the RG4172BK / RC2573GR setup remote in setup mode and pressing the M (menu) button. If the television is in Commercial Mode, the Institutional features will be accessible. On the following page, a typical late-model menu is shown. The specific items contained in the menus of your Philips Institutional television will vary depending upon the operational mode and the model and manufacture date of the specific Philips Institutional television. Using The Setup Remote With Other Philips iTV Products Your RG4172BK / RC2573GR setup remote is used with and/or required for a variety of other Philips Institutional Television products and accessories, including Philips Institutional Televisions, SmartLoader Clone Boxes (RL9820BK / CLON99BK), and Philips iTV SmartCards (Net1Card, Net3Card, etc.). Later in this guide there are brief summaries describing the use of the RG4172BK / RC2573 with selected accessories. Please consult the documentation for the respective television or accessory products with which the RG4172BK / RC2573GR is to be used.

The following table summarizes the Commercial and Consumer menu items available on a typical late-model Philips Institutional television, and is intended merely to be representative of the types of items and features in the two modes. The column labeled CONSUMER indicates the Main Menu items that are available when the television is in Consumer mode, and Menu or Sleep is pressed on a guest-mode remote (or RG4172BK/RC2573GR master setup remote in guest mode). The column labeled COMMERCIAL indicates the Setup Menu items available with the RG4172BK / RC2573GR master setup remote whenever the setup remote is in setup mode. NOTE: The specific items contained in the menus of your Philips Institutional television will vary depending upon the operational mode and the model and manufacture date of the specific Philips Institutional television.
MENU ITEM (MENU TITLE) LANGUAGE CHANNEL INSTALL CABLE TUNING BRIGHTNESS COLOR CONTRAST SHARPNESS TINT NOISE REDUCTION SOUND MODE SAP AUDIO OUT BALANCE TREBLE BASS INCRED STEREO AVL VOLUME BAR MIN VOLUME MAX VOLUME SWITCH ON VOLUME SWITCH ON CHANNEL POWER ON CHANNEL DISPLAY KEYBOARD LOCK ESP AUDIO/VIDEO MUTE EXT AUD / VID OUT WELCOME MESSAGE CHANNEL GUIDE REMINDER 3 DIGIT ENTRY A/CH A/V SWITCH CC SAVE CC V-CHIP MENU ITEM SAVE V-CHIP V-CHIP SETUP SLEEPTIMER SECURITY EXIT SETTINGS / OPTIONS SETUP MENU / MAIN MENU ENGLISH/ESPANOL/FRANAIS > ON/OFF ---|--- 31 ---|--- 31 ---|--- 31 ---|--- 31 ---||--- 0 ON/OFF MONO / STEREO OFF / NO SAP / ON FIXED / VARIABLE ---|--- 0 ---|--- 31 ---|--- 31 ON / OFF ON / OFF ON / OFF |------ 0 ------| 63 ---|--- 31 / STANDARD Ch. 1-125 / FRONT / AUX / S-VIDEO / CVI / STANDARD STANDARD / FORCED NUMBER / LABEL / ALL / NONE ON / OFF 1-99 / OFF OFF / BLACK / BLUE ON / OFF > POWER ON/OFF/ON ON / OFF ON / OFF ON / OFF OFF/CC-1/CC-2/CC ON MUTE ON / OFF ON / OFF ON / OFF > OFF/15/30/45/60/90/120/180/240 STANDARD/HIGH > COMMERCIAL SETUP MENU x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x CONSUMER MAIN MENU x x x x x x x x x x x x x x x x
USING THE SETUP REMOTE RG4172BK / RC2573GR WITH THE CLON99BK SMARTLOADER
When the CLON99BK first establishes communication with the Philips iTV, an on-screen prompt instructs the user to PRESS POWER. THE MENU THAT WILL THEN APPEAR DEPENDS UPON WHETHER THE POWER COMMAND IS SYSTEM 0 (GUEST MODE) OR SYSTEM 7 (SETUP MODE). ONLY THE RG4172BK / RC2573GR SETUP REMOTES CAN ISSUE SYSTEM 7 SETUP-MODE POWER COMMANDS. A setup-mode power command invokes the six-item CLON99BK SmartLoader menu (see below, left) that includes menu items to download (read) television settings into the SmartLoader, erase the SmartLoader memory, and perform a system test. A guest-mode remote POWER command or television front panel POWER command invokes an abbreviated menu (see below, right) from which you can only upload (write) the settings currently stored in the SmartLoader to the television. This is intended to simplify uploading settings to a large number of televisions, requiring only the guest-room remote, or no remote at all (assuming the front panel has not been locked out). NOTE: The settings stored in the SmartLoader must match the memory type of the television to which you wish to upload. Please consult the CLON99BK Instructions For Use (14061) for more information. Six-Item SmartLoader Menu (Requires Setup Remote) Press POWER; Setup Remote In Setup Mode PHILIPS SMARTLOADER 99 SYSTEM VERSION D.- READ TV 2 - WRITE TV WITH SETTINGS 3 - WRITE TV WITHOUT SETTINGS 4 - ERASE SMARTLOADER MEMORY 5 - SYSTEM TEST 6 - EXIT SMARTLOADER STORED MEMORY TYPE 01, 04 Write-Only SmartLoader Menu (Press POWER On Front Panel, Guest Remote or Setup Remote In Guest Mode) PHILIPS SMARTLOADER 99 SYSTEM VERSION D.0 PRESS CH/UP TO WRITE TV PRESS POWER TO EXIT SYSTEM STORED MEMORY TYPE 01, 04

USING THE SETUP REMOTE RG4172BK / RC2573GR WITH THE NET1CARD
The alpha / soft keys on the RG4172BK / RC2573GR setup remote are required during the setup of the Philips iTV Net1Card. The functions of the alpha keys are not affected by the setup remotes mode. The A key is used to configure the Net1Cards control mode (Receive, Transmit, Factory, or Computer). The commercial settings menu appears when the A key is pressed. If the Net1Card is configured as a receiver, then when the D key is pressed, the Receiver Control menu appears, allowing the cards ID number and stand-alone groups to be configured. If the Net1Card is configured as a transmitter, then when the D key is pressed, the Transmitter Control menu appears, from which stand-alone commands can be sent to the Net1 client televisions. Please consult the Net1Card instruction booklet (IB7975E002) for additional information.

A Key Net1Card Menu

D Key Net1Card Menus