Version 07-08-2002

Philips Hard Disc Video Recorder
The way to Convenient TV!
No media to handle! Instant Record! Play Anytime! Pause Live TV! Instant access to all recordings! DVD Playback MP3 Audio Digital Picture & Sound Quality!
Hard Disc Video Recorder + DVD Player

HDR1000

Playback System DVD-Video DVD+R DVD+RW Video CD (VCD) MP3-CD1 Audio CD (CD-R & CD-RW) 1

1 applicable

Audio Performance DA Converter DVD
for single session discs only
Optical Read System Laser type AlGaAs Numerical Aperture 0.60 (DVD) 0.45 (VCD/CD) Wavelength 650 nm (DVD) 780 nm (VCD/CD) Output power 0.1 - 0.7 mW Focusing Astigmatic Tracking Differential Phase Detection CD3-Spot TV Standard Scan Frequency Number of lines Playback Region Video Format Digital Compression DVD-VIDEO Horizontal Resolution Vertical Resolution VCD Horizontal Resolution Vertical Resolution
24 bit fs 96 kHz 4 Hz - 44 kHz fs 48 kHz 4 Hz - 22 kHz Video CD fs 44.1 kHz 4 Hz - 22 kHz Audio CD fs 44.1 kHz 4 Hz - 20 kHz Signal-Noise (1kHz) 105 dB Dynamic Range (1kHz) 85 dB Crosstalk (1kHz) 105 dB Distortion / Noise (1kHz) 0.07% dB MPEG MP3 MPEG audio layer 3 DVD-Video Functionality Multi-angle Selection Audio Selection (1 out of max. 8 languages) Subtitles Selection (1 out of max. 32 languages) Aspect Ratio conversion (16:9, 4:3 Letterbox, 4:3 Pan Scan) Parental Lock Disc Menu support (Title Menu and Root Menu) Resume after stop / standby Disc playback Auto Resume Play / Stop / Pause / Slow / Zoom Fast Forward/Backward Step Forward/Backward Title / Track Select Next / Previous Title / Track / Chapter Repeat (Chapter / Title / All) or (Track / All) A-B Repeat Parental Lock Video CD Functionality V1.1 (Playback only) V2.0 with PBC (Playback control) Audio CD Functionality Time Display (Total /Track / Remaining Track Time) Full audio functionality with remote control MP3 Functionality Album and track Selection Repeat (disc / album / track) Nested directory level supported to 8 levels Maximum number of Albums is 32 Maximum number of tracks is 999
PAL NTSC 50Hz 60Hz PAL / NTSC 2 MPEG2 for DVD MPEG1 for VCD 50Hz 720 pixelslines 50Hz 352 pixelslines
equivalent to 500 lines on your TV equivalent to 250 lines on your TV
Audio Format Playback Compressed
MPEG1, AC-3, DTS Digital PCM 16, 20, 24 bit fs 48, 96 kHz Analog stereo & Dolby ProLogic (VCD & downmix from multi-channel sound) 3D Sound for virtual 5-channel sound on 2 speakers
HDD Recording Format Medium Hard Disc Size 3.5 Half Height Capacity 40 Gbyte File System ERTFS hr : mm Mbit/sec Recording time HQ 12 : 13 5.5 SQ 19 : 23 3.0 LP 36 : 45 2.0 TV System Output PAL Input PAL, SECAM Internal tuner PAL B/G/I, SECAM L/L Video Format Digital Compression HQ,SQ mode Horizontal Resolution Vertical Resolution LP mode Horizontal Resolution Vertical Resolution
User Interface Disc Space Free/Used Status Time Status Bar Time Shift Buffer 30, 60, 180 min English, French, German, Dutch, Spanish, Italian Programming Number of Events Programming System Programming Mode Record Control and Transmitter Identific. Timer Programming
20 / 1 Year Once, Daily, Weekly, Episode OTR, Remote PDC, VPS ShowView
MPEG2 CBR 720 pixelslines 360 pixelslines
General Functionality Backup Presets & Timer Events Backup Clock & Calendar Time/Date Download (Time/Date) Audio Recording Level
Permanent 1 minute PDC, Text Automatic
Audio Format LP ADPCM 16 bit, fs 44,1 kHz 352,8 Kbps per Channel HQ, SQ PCM 16 bit fs 44,1 kHz 1411,2 Kbps per channel Audio Performance (HQ & SQ) DA Converter 16 bit AD Converter 24 bit Signal-Noise (1kHz) 80 dB Dynamic Range (1kHz) 80 dB Crosstalk (1kHz) 80 dB Distortion / Noise (1kHz) 0.1% Reception Tuner Tuning Tuning/Install
Playback Functionality Play / Stop / Pause Fast Forward/Backward (x2, 4, 32, 128) Step Forward/Backward Slow (x , 1/4 , 1/8) Navigation System Instant Jump Instant Replay Title Select Next / Previous Title Perfect Still Audio Selection (Stereo, Mono, Dual Languages) 16:9, 4:3 Letterbox, 4:3 Pan Scan Title Erase Instant Overview of contents Record Functionality Direct Record One-Touch Record (OTR) Episode Recording (Favourite Program) Station ID and Program Name recording
UHF + VHF + Hyperband PLL, Freq., 99 presets Guide Channel Mapping, Manual Search/Store, Automatic Search/Store NICAM, German stereo, Mono
TV Standard Standard PAL/SECAM Scan Frequency 50Hz Number of lines 625 Video Performance DA Converter 10 bit AD Converter 9 bit Signal handling Components Video Output 1 Vpp into 75 ohm S-Video Output Y: 1 Vpp into 75 Ohm C: 0.300 Vpp into 75 Ohm RGB Output 0.7 Vpp into 75 Ohm Rear Connections SCART 1 CVBS in/out, RGB out, pin 8 out (3 levels), pin16 out (2 level) SCART 2 CVBS in/out, RGB in, decoder, pin 8 in (3 levels), pin16 in (2 level) S-Video Input Audio Output Digital Audio Output Hosiden (Mini DIN) 4-pin L/R Cinch (white/red)

Package Contents Hard Disc Recorder Remote Control including two R06/AA batteries Directions for use full SCART cable (1,5 M) Coax RF antenna cable Packaging Colours Languages
Size (W x H x D) Gross weight Buffers
Pacman Conform English (front, top) French (rear) Spanish (right) German (left) 520 x 181 x 452 mm appr. 6.5 kg Polypropylene
RF Modulator Adj. Output Freq. Default Frequency Adjust Frequency User Interface OSD Languages Display
559 to 523 MHz (Ch 32-40) 591 MHz (Ch 36) Software
1 coaxial, 1 optical IEC958 for CDDA / LPCM IEC1937 for MPEG2, AC-3, DTS RF Antenna Input IEC 75 ohms RF TV Output IEC 75 ohms
English, French, German, Spanish, Italian, Dutch FTD
Power Supply Power Inlet 220-240 V, 50Hz Power consumption Operation 42 W Standby 5W Operation Temp. 5C - 35C
Cabinet Dimensions (wxhxd) 435 x 87 x 340 mm Net Weight 5,1 Kg Remote Control Type Codes

Waist RC5 / RC6

E4310.QX3

02.8.22 11:19 AM

Page 6

TABLE OF CONTENTS

INFORMATION. 2 LASER SAFETY. 2 IMPORTANT SAFEGUARDS. 3 PRECAUTIONS. 4 FEATURES. 7 ABOUT THE DISCS. 8 HANDLING PRECAUTIONS. 9 OPERATING CONTROLS AND FUNCTIONS. 10 CONNECTIONS. 12
ANTENNA CONNECTION. 12 SCART (EURO A/V) CONNECTORS. 12 CONNECT TO A TV WITH Y/C INPUT CONNECTOR OR STEREO SYSTEM. 12 EXTERNAL INPUT MODE. 12 CONNECT TO AN AMPLIFIER EQUIPPED WITH DIGITAL INPUT CONNECTORS. 13 CONNECT TO A DOLBY DIGITAL DECODER, DTS DECODER, OR MPEG DECODER. 14

THE SHOWVIEW SYSTEM. 30

TIMER RECORDING USING THE SHOWVIEW SYSTEM. 30
VPS (Video Program System) / PDC (Program Delivery Control). 31 THE INFORMATION DISPLAY. 32 RECORDING FROM DVD DISC TO HDD. 33 DVD OPERATION. 34
PLAYING A DVD VIDEO, AN AUDIO CD, OR A VIDEO CD. 34 DISC MENUS. 34 TITLE MENU. 34 PAUSE. 35 STEP BY STEP PLAYBACK. 35 RESUME. 35 FAST FORWARD/REVERSE SEARCH. 35 SLOW MOTION. 35 ZOOM. 36 STARTING FROM A DESIRED TRACK. 36 TITLE/CHAPTER. 36 TIME SEARCH. 36 REPEAT PLAYBACK. 37 REPEAT TRACK. 37 A-B REPEAT. 37 PROGRAM. 37 RANDOM PLAYBACK. 37 MP3 PLAYBACK. 38 DISPLAY INFORMATION(MP3). 38 TRACK SELECTION(MP3). 38 RANDOM PLAYBACK(MP3). 38 PROGRAM(MP3). 38 AUDIO LANGUAGE. 39 STEREO SOUND MODE. 39 SUBTITLE LANGUAGE. 39 CAMERA ANGLE. 39 CHANGE THE ON-SCREEN DISPLAY. 39 PARENTAL LOCK. 40 PARENTAL LEVEL. 40 MARKER SETUP SCREEN. 41
INITIAL SETTINGS. 15 CHANGE THE SETTINGS. 16
CLOCK SETTING. LANGUAGE SETTING. TIME SHIFT. SKIP TIME SETTING. TUNER SETUP. MODULATOR SETUP. 21 23

HDD RECORDING. 24

MANUAL RECORDING. OTR (One Touch Recording). RECORDING ONE PROGRAM WHILE VIEWING ANOTHER VIA THE TV. SET THE TITLE NAME. SELECT THE RECORDING MODE. 24. 24. 24. 24. 24

HDD NAVIGATION. 25

PLAYBACK VIDEO TITLES. SPECIAL PLAYBACK. RESUMING PLAYBACK. DELETE TITLE STORED ON HDD. 25 25
CHANGE THE DVD PLAYER SETTINGS. 42
AUDIO SETTINGS FOR DVD. TRUSURROUND SETTING. DISPLAY SETTINGS. LANGUAGE SETTINGS. 43 44

TIMER RECORDING. 26

AUTOMATIC TIMER RECORDING. 26 TIMER REVIEW. 29
TROUBLESHOOTING GUIDE. 45 SPECIFICATIONS. 46 SUPPLIED ACCESSORIES. 46

EN / 2A01

Page 2

INFORMATION

Congratulations on purchasing your new Hard Disc Video Recorder with DVD Player (HDR1000). Spare a few moments to read this instruction manual to get better results, and to avoid any costly mistakes.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.
This unit employs TruSurround system of SRS Labs, Inc. as virtual technology. TruSurround and symbol are trademarks of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

English

Page 4

PRECAUTIONS

POWER SUPPLY
The main power supply is engaged when the mains plug is plugged into a 220-240V/50Hz AC outlet. To operate the unit, press the STANDBY button to turn on the unit.

A NOTE ABOUT RECYCLING

This products packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
WARNING: LIVE PARTS INSIDE. DO NOT REMOVE ANY SCREWS.
DECLARATION OF CONFORMITY DEW WARNING
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use the unit for at least 2 hours until the inside has dried out. This product complies with the requirement of the directives EMC-Directive: 89 / 336 / EEC Low Voltage Directive: 73 / 23 / EEC CE Marking: 93 / 68 / EEC declare that the HDR1000 are in compliance with following norms: EN 55013:1990+A12:1994+A13:1996+A14:1999 EN 55020:1994+A11:1996+A12:1999+A13:1999+A14:1999 EN 61000-3-2/ 1995+A1:1998+A2:1998+A14:2000 EN 61000-3-3/ 1995 EN 60065:1998

ABOUT COPYRIGHT

Unauthorised copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorised by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Page 5

1) Do not attempt to open the cabinet. There are no parts you can service inside. Refer all servicing to qualified service personnel. 2) Slot and openings in the cabinet and at the side or bottom are provided for ventilation. To ensure reliable operation and to protect the unit from overheating these opening must not be blocked or covered. Avoid enclosed spaces such as book cases unless proper ventilation is provided. 3) Keep the unit away from the radiator heat sources. 4) Avoid using near strong magnetic fields. 5) Do not push objects of any kind through the cabinet slot as they could touch current carrying parts or short circuit parts resulting in a fire or electric shock. 6) Never spill liquid of any kind on this unit. If liquid is spilled into the unit, consult a qualified service engineer. 7) Use this unit in a horizontal (flat) position only. 8) This unit is in Stand-by mode when it turns off whilst the power cord is connected. 9) This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorised change or modification is made.

CABINET SERVICING

Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry. Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discolouration to the exposed surfaces.
Always store the disc in its protective case when it is not used.
To clean disc, use a soft cloth. Do not use a hard cloth since this will damage the disc. Wipe the disc in a straight line from centre to edge. Never wipe with a circular motion.
Do not use detergent or abrasive cleaning agents.

Page 10

OPERATING CONTROLS AND FUNCTIONS

FRONT PANEL

REAR VIEW

SCART2 (DEC.)

R OPTICAL COAXIAL YC OUT

DVD DIGITAL OUT

ANT. OUTPUT

SCART1 (TV)

9. 1or 0(Forward or Reverse) Button Press for a fast forward or fast reverse playback. DVD: Press PAUSE button, then press 1 button to begin slow motion playback. 10. REC/OTR Button DVD: Press to start recording from DVD to HDD. HDD: Press to start a recording. 11. TIMER SET Light This light glows when you set a timer recording. While HDR1000 detects the VPS/PDC signal, this light will blink. 12. RECORD Light This light appears during a recording. 13. DVD Digital Display This display appears when the HDR1000 is in DVD mode. In this mode, you can watch the DVD operations or discs on the TV screen. Details are on page 11. 14. HDD Light (Blue) This light appears when the HDR1000 is in HDD mode. In this mode, you can watch the HDD operations or HDD titles on the TV screen. 15. Remote Sensor Window Receives the infrared control signals from the remote control unit. 16. AUDIO Button DVD: Press to select a desired audio language or sound mode. HDD: Press to select sound mode (stereo, main, sub). 17. ZOOM Button DVD: Enlarges part of a DVD-reproduced image. 18. SLOW Button HDD: Press to view the picture in slow motion. 19. HDD Button Press before using the remote control for HDD features. 20. MENU Button Displays the menus. 21. Arrow Buttons Use when making settings whilst watching the display on a TV screen. 22. NAVI Button HDD: Press to turn on the Navigation screen. 23. SETUP Button DVD: Press to turn on the Setup screen. 24. SUB T. Button DVD: Press to select a desired subtitle. 25. TITLE Button DVD: Press to show the table of contents. HDD: Press to turn on the Enter Name screen. 26. Number Buttons DVD: Press to directly select a Track for playback. HDD: Use to set up HDD features (such as the clock). Press to select TV programs at the HDR1000.

REMOTE CONTROL

STANDBY

OPEN/CLOSE

SET UP CLEAR

TIMER AUDIO

REC/OTR
RETURN DISPLAY TITLE SUB T. REPEAT AB

SEARCH MODE

7 +10 9
1. STANDBY Button Press to turn the unit on or off. STANDBY Indicator (only on the main unit) Lights up if the HDR1000 is plugged in. Turns off if the HDR1000 is switched on. 2. PROG (+ or -) Button HDD: Press to select the program for viewing or recording. 3. HDD/DVD Button Use to select HDD mode or DVD mode. 4. OPEN/CLOSE Button DVD: Press to open or close the tray. 5. Disc loading tray 6. PLAY Button Press to start playback. 7. STOP Button DVD: Press to stop the operation of Disc. HDD: Press to stop playback or recording. 8. PAUSE Button DVD: Press to pause the current disc operation. HDD: Press to pause playback.

Page 11

27. TIMER Button HDD: Press to turn on the Timer screen. 28. ANGLE Button DVD: Press to change the camera angle to see the sequence being played back from a different angle. 29. MODE Button DVD: Activates program playback or random playback mode when playing CDs or MP3. Sets the SRS TruSurround during DVD playback. HDD: Press to select Recording mode(HQ,SQ or LP) 30. SEARCH MODE Button DVD: Press to locate a desired point. 31. A-B REPEAT Button DVD: Repeats playback of a selected section. 32. REPEAT Button DVD: Repeats playback of the current disc, title, chapter or track. 33. RETURN Button DVD: Returns to the previous operation. HDD: Press to clear window, or go to previous menu. 34. CLEAR Button Reset a setting. 35. DISPLAY Button DVD: Press to display the current status on the TV screen. HDD: Press to turn On Screen Display on and off. 36. OK Button Press to execute the selection. 37. DVD Button Press before using the remote control for DVD features. 38. GO TO Button HDD: Press to move to LIVE broadcasting. 39. SKIP or (Forward or Backward) Button DVD: Press during playback to go to previous or subsequent track or chapter. HDD: Press to skip forward or backward. 40. Mains Cord Connect to a standard AC outlet to supply the main power to the HDR1000. 41. OPTICAL DVD DIGITAL OUT Connector DVD: Connect to the Optical Digital Audio In connector of a decoder or audio receiver. 42. COAXIAL DVD DIGITAL OUT Connector DVD: Connect to the Coaxial Digital Audio In connector of a decoder or audio receiver. 43. Y/C OUTPUT Connector Connect to the Y/C Input connector of a TV. 44. AUDIO OUTPUT (L/R) Connectors Connect to the Audio Input connectors of a TV or other audio equipment. 45. Euro SCART1 Connector (To the TV) Connect to the 21-pin scart connector of a TV. 46. Euro SCART2 Connector (From decoder) Connect to the 21-pin scart connector of a decoder. 47. ANT(enna) IN Connector Connect your antenna or cable here. 48. ANT(enna) OUT Connector Connect to the ANTENNA IN connector on your TV. 49. Ventilating Holes There is a cooling fan in the unit. Take care not to block the ventilating holes. 50. Reset Button When the HDR1000 does not operate at all even if you press any buttons, press this button with the tip of a pen etc. The hard disc setting of HDR1000 will reset. Then, press STANDBY button to turn on the HDR1000.

[Antenna]

CONNECT TO A TV WITH Y/C INPUT CONNECTOR OR STEREO SYSTEM
To Right (red) and Left (white) AUDIO INPUT connectors To Right (red) and Left (white) AUDIO OUTPUT connectors

to ANT.IN

to aerial socket

R OPTICAL COAXIAL YC

to ANT.OUT [Back of the HDD/DVD]
To Right (red) and Left (white) AUDIO INPUT connectors
[Stereo system] [Back of the HDR1000] To Y/C OUTPUT connector

OPTICAL COAXIAL YC

SCART (EURO A/V) CONNECTORS
Your HDR1000 is fitted with two audio/video connectors which you may connect to other external devices with audio/video connectors. We recommend this connection to ensure a better audio and picture quality. Additional Euro audio/video cables are obtainable from your dealer.
[Decoder (Not supplied)] to 21-Pin Scart Connector [Back of the HDR1000]
To Y/C INPUT connector to 21-Pin Scart connector

to SCART1

EXTERNAL INPUT MODE
To receive the signal from an external input (decoder, video camera, satellite tuner, another VCR etc.), connect to SCART2 connector, and press PROG + or button or enter 00 with Number button. LINE2 appears on the TV screen. If you use the SCART1 connector, press PROG + or button or enter 0 with Number button. LINE1 appears on the TV screen.

to SCART2

to SCART1 to 21-Pin Scart Connector [TV]

to ANT.OUT

to aerial connector

Page 13

CONNECT TO AN AMPLIFIER EQUIPPED WITH DIGITAL INPUT CONNECTORS
Use an audio coaxial digital cable or an audio optical cable (available from your dealer) for the audio connection. If you use the OPTICAL connector, remove the protective cap. English

To SCART1 connector

IN L OUT
to 21-Pin Scart connector OR To Y/C INPUT connector Amplifier equipped with digital input connectors

To Y/C OUTPUT connector

To OPTICAL DVD DIGITAL OUT connector To OPTICAL DIGITAL AUDIO INPUT connector OR To COAXIAL DIGITAL AUDIO INPUT connector

Clock On P01 Small Screen 17:40 Thu./07/Mar/2002 Store

Exit the setting mode.

If the setting menu still remains, press MENU button or press RETURN button repeatedly to exit.
If you need to make a correction during a clock setting, press s button until the cursor is positioned on the item you want to change. Then enter the correct information. Power failures that last for more than five minutes can cause you to lose your clock setting if you set the clock manually. If this happens, set the clock again. You cannot select Clock menu during Timer Recording at step [3].

Page 18

LANGUAGE SETTING
You can set the language and country for on screen menu. Before you begin, press HDD button so that the blue HDD light appears on the front panel on the HDR1000.
Language English Netherlands Small Screen
Store Menu Basic Setup Tuner Setup Small Screen
Press MENU button or press RETURN button repeatedly to exit.

Select Language.

You need to set up the on-screen language of HDD and DVD separately. Details are on page 44.

Page 19

TIME SHIFT
TIME SHIFT is a very convenient feature when you are away from the TV. Whenever you turn on the HDR1000, it will start to record its current program into the time shift buffer on to the internal HDD. It will automatically play back the content of the time shift buffer. To change the buffer time size and record mode for TIME SHIFT, follow steps below. The default setting is as the following. * Buffer time size: 30 Minute * Record mode: HQ Mode Before you begin, press HDD button so that the blue HDD light appears on the front panel on the HDR1000.

Select Record Mode.

Press K or L button to Time Shift Buffer Time Size 60 min select your desired Record Mode LP record mode (LP, SQ or HQ). Then press B button to move the cursor. Refer to page 26 for details on LP, SQ and HQ mode.

Buffer Time Size

Record Mode
Time Shift Small 60 min Small Screen SQ

Screen

Select : KL{ B Choose : OK Exit : RETURN
Time Shift 60 min Small Screen SQ

[TIME SHIFT PLAYBACK]

Press PAUSE button whilst you are watching TV using the HDR1000 tuner.
The picture on the TV screen will pause.

Select Time Shift.

Press PLAY button.
Time Shift Playback will start from the point when you pressed the PAUSE button.

Set System.

Frequency out 599MHz 591MHz
Press K or L button to select your desired Store System. (You can select PAL G, PAL I, or Off.) Then, press B button twice to move the cursor. If you dont have clear picture or sound interference despite optimisation, select Off. You can switch off the built-in modulator. Warning: Only switch off the modulator if you have connected the HDR1000 to a TV with a scart cable. Without a scart cable you will not receive a picture from the HDR1000 to the TV set when the modulator is switched off.
Select frequency for Frequency out. Modulator System PAL G Press K/L, or Number Small Screen Frequency out 599MHz

Page 24

HDD RECORDING

MANUAL RECORDING

This HDR1000 stores the recorded programs as video titles on the HDD. Before you begin, press HDD button so that the blue HDD light appears on the front panel on the HDR1000. To set the recording mode, refer to page 19.
RECORDING ONE PROGRAM WHILE VIEWING ANOTHER VIA THE TV
You can record one program whilst viewing another via the TV. To start recording, follow steps [1] to [3] under MANUAL RECORDING. Then, set the TV to the program you want to watch. TO MONITOR THE PROGRESS OF YOUR RECORDING; Select the input on your TV reserved for HDR1000.
Select the program to be Program Name Position Number recorded.
Press the P(PROG) +/, or Number buttons (0-9) on the remote control. (Example: position number 01)

P01/ARD Stereo

SET THE TITLE NAME
Display Navigationscreen.

Press NAVI button.

Select the Recording mode.
Press the MODE button. (Refer to SELECT THE RECORDING MODE.)
Select the title whose name you want to set.
Press K or L button. The cursor onto Watch button will move. Press 1 or 0 button to review next page (or previous page).

Navigation

Name Length Date Program Watch Resume Delete

Press REC/OTR button.

The indicator on the display lights up.
Press STOP button when recording is completed.
Do you want to stop the recording? will appear. If it is OK, press STOP button again.
COAST 1:32:35 10/Jan PRO7 BOAT 2:30:43 09/Jan DSF WIEN 2:00:00 09/Jan NTV OSAKA 1:00:22 30/Dec RTL MUSIC 0:30:11 24/Dec LINE1 Total Titles 12 1/3 page Small Screen Time Shift (Current Picture)

Select the title Name.

Timer Programming

Timer Review

Select Timer Programming.

Press B button.

Timer Programming Start Time 00:00 End Time 01:30 Date Thu./07/Mar Small Screen Program P01/PR07 Frequency One Time Episode 1 Rec. Mode SQ Store VPS/PDC Off Name: Select : KL{ B Choose : OK Exit : RETURN
Set Start Time. (hour and minute)
First, press K,L, or Timer Programming Number buttons to select Start Time 19:30 End Time 01:30 your desired hour. Date Thu./07/Mar Small Screen Program P01/PR07 (Example: 19) Frequency One Time Episode 1 Then, press B button to Rec. Mode SQ Store move the cursor. VPS/PDC Off Name: Select : KL{ B Next, press K,L, or Choose : OK Exit : RETURN Number buttons to select your desired minute. (Example: 30) Then, press B button twice to move the cursor. If the hour or minute is below 10 then you first have to enter a "0" followed by the number. This is in case you enter the time with Number buttons.
Record Time This chart shows the recording time for the HDD. There are three modes: LP, SQ, and HQ. For example; When Buffer for Time Shift is set to 30 minutes.
Recording Mode LP (Long Play) SQ (Standard Quality) HQ (High Quality) Recordable Time About 36.5 hours* About 18.5 hours* About 12.0 hours*
*The time on chart is approximated time. They will be changed according to the setting of TIME SHIFT. The longer the buffer Time Setting is set, the shorter the recording time will be.
Buffer for Time Shift Recordable Space
Set End Time. (hour and minute)

HDD Space (40GB)

After step [2], a warning message appears when there are more than 50 titles stored. In this case, press NAVI button, then delete unwanted titles in Navigation menu. Or, press RETURN button to remove the message. After step [2], a warning message appears when more than 20 timer programs have been setup. In this case, press TIMER button to remove the message.
First, press K,L, or Number buttons to select your desired hour. (Example: 20) Then, press B button to move the cursor. Next, press K,L, or Number buttons to select your desired minute. (Example: 30) Then, press B button twice to move the cursor. If the hour or minute is below 10 then you first have to enter a "0" followed by the number. This is in case you enter the time with Number buttons.
Timer Programming Start Time 19:30 End Time 20:30 Date Thu./07/Mar Small Screen Program P01/PR07 Frequency One Time Episode 1 Rec. Mode SQ Store VPS/PDC Off Name: Select : KL{ B Choose : OK Exit : RETURN

Page 27

AUTOMATIC TIMER RECORDING (Contd)

Page 29

TIMER REVIEW
To Check or Correct Timer Recordings
Before you begin, press HDD button so that the blue HDD light appears on the front panel of the HDR1000.
To Cancel Timer Recordings

ShowView system

Timer Small Screen
ShowView system Timer Review

Select Timer Review.

Select your desired timer program.
No. 5 Name ABC SPORTS NEWS WIEN YACHT Date 19/Jan 24/Jan 26/Jan 29/Jan 06/May Start 15:30 18:00 08:00 20:00 19:30 Stop V/P Program 16:30 ARD 19:30 DSF 08:30 NTV 22:00 RTL 20:30 DSF
To correct the timer recording.
Press OK button. The Timer Programming setting menu will appear. You can correct using cursor buttons.
Press OK button until Timer Review menu appears on the TV screen. If setting is OK, press TIMER button or press RETURN button twice to exit. The TIMER light will appear on the front of the HDR1000.
Exit the Timer Review Mode.
Press TIMER button or press RETURN button.
Text colour gives you the information on the current timer status. * Black: in Standby * Blue: in recording * Red: Programmed Timer is overlapping another Timer Recording. (Refer to Timer Hints on page 28.)
Timer Programming Start Time 19:30 End Time 20:30 Date Mon./06/May Small Screen Program P02/DSF Frequency One Time Episode 1 Rec. Mode SQ Store VPS/PDC Off Name: YACHT Select : KL{ B Choose : OK Exit : RETURN
To cancel the timer recording.
Press CLEAR button. Delete this Timer Recording? will appear. If it is OK, press OK button. The timer program will disappear from the Timer Programming List.
No. 5 Name Date Start Stop V/P ABC 19/Jan 15:30 16:30 SPORTS 24/Jan 18:00 19:30 Delete this Timer Recording ? NEWS 26/Jan 08:00 08:30 Yes: OK No: RETURN WIEN 29/Jan 20:00 22:00 YACHT 01/Feb 19:00 19:30 Program ARD DSF NTV RTL LINE1
Select :KL Choose:OK Exit :RETURN Delete:CLEAR Prev5 : {{ Next5:

Page 30

THE SHOWVIEW SYSTEM
TIMER RECORDING USING THE SHOWVIEW SYSTEM
Follow these steps to set a timer recording with the ShowView number in your TV guide. Before you begin: Set up the TV programs at the HDR1000. Details are on pages 21-22. Set the clock. Details are on pages 16-17. Before you begin, press HDD button so that the blue HDD light appears on the front panel of the HDR1000.
Continue with step [8] at AUTOMATIC TIMER RECORDING on page 27.
You can correct the data for Frequency, Episode, Rec. Mode, VPS/PDC if you need.

Select ShowView system.

Set the ShowView number.

ShowView No.

- - - - - - - - Press Number buttons to input the ShowView num: 0-9 Numbers ber of the TV program you Move : {B Small Screen Clear : CLEAR want to record. Choose : OK Exit : RETURN Then, press OK button. Press CLEAR button to cancel ShowView number. Press { or B button to move the cursor.
Confirm the timer program.
If you correct the program, press B button to move the cursor to program setting position. Then, press K or L button to select your desired program.
To stop a timer recording that has started, press STOP button. The message will appear to confirm. If it is OK, press STOP button again. Given Number not correct. may appear on the TV screen after step [3] if you enter an incorrect ShowView number (for example, one that is too short). In this case, press RETURN button. Then, enter the correct ShowView number. After step [2], a warning message appears when there are more than 50 titles stored. In this case, press NAVI button, then delete unwanted titles in Navigation menu. Or, press RETURN button to remove the message. After step [2], a warning message appears when more than 20 timer programs have been setup. In this case, press TIMER button to remove the message.

Page 31

VPS (Video Program System)/PDC (Program Delivery Control)
The Video Program System (VPS) or the Program Delivery Control (PDC) is a very convenient system sent by the broadcaster to ensure that the TV programs you have programmed for timer recording, will be recorded exactly from beginning to end, even if the actual broadcasting time differs from the scheduled time due to delayed start or extension of the program duration. Also, if a program is interrupted and, for example, some special news are inserted, the recording can also be interrupted automatically and resumed when the program continues. Example: To record the Movie from 19:00 to 21:00. 19:00 Soccer Game Movie 21:00 News Soccer Game Recording Result:

Without VPS/PDC:

19:00 Movie 21:00 News
Actual Broadcasting Time (Soccer Game ends 30 minutes later) The Movie is delayed until 19:30. 19:30 Soccer Game Movie 21:30 News End of Soccer Game is recorded.
End of the Movie is not recorded.

With VPS/PDC:

19:30 Soccer Game
21:30 Movie Recording News
The movie is recorded precisely from beginning to end.
NOTE When the VPS/PDC signal disappears because the broadcast signal is weak, or when a broadcasting station does not transmit a regular VPS/PDC signal, the timer recording will be performed in the normal mode (without VPS/PDC) even if it was programmed for VPS/PDC. If a deviating VPS/PDC time is stated, i.e 20.15 (VPS/PDC 20.14), the VPS/PDC time 20.14 has to be entered to the minute. If one does not enter the exact VPS/PDC time, then VPS/PDC must be switched off. Otherwise the recording will not take place.

Before you begin, press DVD button.
Press Number buttons to change the setting. Playback will start.

Page 35

Before you begin, press DVD button. Before you begin, press DVD button. Playback will pause, with sound muted. English
FAST FORWARD/REVERSE SEARCH
Press PAUSE button during playback. Press PLAY button to resume playback. Press 1 or 0 button during playback.
For DVDs, pressing 1 or 0 button repeatedly to select the required forward or reverse speed: x2, x8, x30, x60. For VCDs, pressing 1 or 0 button repeatedly to select the required forward or reverse speed: x2, x8, x30. For CDs, the playback speed is x16 fixed.

STEP BY STEP PLAYBACK

Press PAUSE button during playback is paused.
The next picture frame is displayed with sound muted each time the button is pressed.
Press PLAY button to return to normal playback speed.

SLOW MOTION

Press PLAY button to resume playback.

RESUME

Press PAUSE button during playback. 1 Press1 button.
Slow motion mode will be activated. (Sound remains muted.) Pressing 1 button to select the required speed: 1/16, 1/8, 1/2 of the normal playback.
Press STOP button during playback.
Playback will stop, and then appear the resuming message at the centre.
Playback will start from the point where playback stopped. NOTES The resume function can be reset by pressing STOP button twice or by opening the disc loading tray. Some Video CDs with PBC function resume playback from the beginning of the track.
NOTE Slow playback is not available with audio CDs or VIDEO CDs. In reverse slow playback is not available.

Page 36

Images can be enlarged on the screen. NOTE Zooming function does not work in a disc menu. Before you begin, press DVD button.

TITLE/CHAPTER

Press ZOOM button during playback.

Playback will continue.

Press SEARCH MODE button to display the Title/Chapter Search on the TV screen. Press Number button to set your desired title or chapter.
During playback, you can select title. When playback is stopped, you can select chapter.
Press ZOOM button repeatedly to select the required zoom factor: x2, x4 or OFF. To move the zoomed image left, right, up, or down.

LB{ Press cursor ( K/L/B/{ ) button during zoom play.

TIME SEARCH

(with PBC function) Before you begin, press DVD button.

To exit zoom mode

Press ZOOM button to OFF in the menu bar.
Press SEARCH MODE button twice during playback. Press Number buttons to set the desired time count.
Example: 1 hour, 23 minutes and 30 seconds 1, 2, 3, 3, 0 NOTE In the case of DVD, Time Search in Title is possible. (But Time Search in Chapter is not possible.) In the case of CD or VIDEO CD, Time Search in Track is effective. (But Time Search in the entire disc is ineffective.) Playback from a desired time count is not available with some discs. Time search is not available with some discs.
STARTING FROM A DESIRED TRACK
Press Number buttons to enter the desired track number.
The selected track will be located, and playback will start. You can also press SEARCH MODE button, use Number buttons to enter the track number. When the track number is entered in the entry box, playback of the desired track will start automatically.
TRICKS WITH SKIP BUTTONS ( , ) If SKIP button is pressed during playback or whilst playback is paused, the current track is skipped and the next track is played. When SKIP button is pressed once, the beginning of the current track is located for replaying. When SKIP button is pressed again within 2-second playback, the previous track is located.

Page 37

REPEAT PLAYBACK
REPEAT are available only during playback. Before you begin, press DVD button. To repeat the current chapter, press REPEAT button. REPEAT [CHAPTER] appears on the TV screen. To repeat the current title, press REPEAT button a second time. REPEAT [TITLE] appears on the TV screen. To exit Repeat mode, press REPEAT button a third time. REPEAT [OFF] appears on the TV screen.

PROGRAM

You can determine the order in which Tracks will play. Before you begin, press DVD button.
Press MODE button in stop mode.
The program screen will appear.

PROGRAM TIME 0:00:00 1/1

Enter the desired track numbers.
Press Number buttons to select the Track number you want.

START: PLAY RANDOM: MODE

DELETE: CLEAR EXIT: RETURN

REPEAT TRACK

Before you begin, press DVD button. To repeat the current track, press REPEAT button. REPEAT [TRACK] appears on the TV screen. To repeat the entire disc, press REPEAT button a second time. REPEAT [ALL] appears on the TV screen. To exit Repeat mode, press REPEAT button a third time. REPEAT [OFF] appears on the TV screen. NOTE Repeat playback is not available when you play the Video CD with PBC function.
Playback will start in the programmed order.

RANDOM PLAYBACK

This shuffles the playing order of tracks instead of playback in the sequence. Before you begin, press DVD button.

Page 42

CHANGE THE DVD PLAYER SETTINGS

AUDIO SETTINGS FOR DVD

TRUSURROUND SETTING
You can enjoy improved stereo sound when you play disc in Dolby Digital, PCM 48kHz or MPEG Audio.
Press SETUP button during playback is stopped. Press K or L button to select AUDIO, then press OK button. Press K or L button to choose the below items and press OK button repeatedly to turn the setting ON or OFF.
DRC (Dynamic Range Control): To compress the range of sound volume. DOLBY DIGITAL: If you connected the HDR1000 to a stereo with Dolby Digital compatible. DTS: If you connected the HDR1000 to a stereo with DTS compatible. MPEG: If you connected the HDR1000 to an MPEG-compatible stereo. DOWN SAMPLING: Press OK button, then K or L button to select AUTO, 48kHz or 96kHz. Press OK button again to confirm selection. Select 96kHz if the disc was recorded in PCM 96kHz, otherwise select 48kHz.
Press MODE button during playback. Press OK button repeatedly to select ON or OFF.
The factory default setting is OFF. Select ON only is you connected the DVD/VCR to a stereo with Dolby Digital or MPEG decoder.
If you use the COAXIAL out connector, turn off SRS TruSurround, otherwise there will be no sound.

Page 43

DISPLAY SETTINGS
Press K or L button to select DISPLAY, then press OK button. Press K or L button to select the below items, then press OK button.
TV ASPECT: Press K or L button for an item selection, then press OK button. Select 4:3 LETTER BOX for a black bars appears on the top and bottom of the screen. Select 4:3 PAN & SCAN for a full height picture with both sides trimmed. Select 16:9 WIDE if a wide-screen TV is connected to the HDR1000. PANEL DISPLAY: Press K or L button to select BRIGHT, DIMMER and AUTO, then press OK button. This adjusts the brightness of the display panel with the factory default BRIGHT. When AUTO is selected, the display dims only during playback. ANGLE ICON: Press OK button repeatedly to turn Angle icon ON or OFF. The default setting is ON.
Press SETUP button during playback is stopped.

Page 44

LANGUAGE SETTINGS
Initial Setting (On-screen display)
You can set the language for on screen menu. Before you begin, press DVD button.

Language options

Language options are not available on all discs. Before you begin, press DVD button.
Press SETUP button when not in playback. Press K or L button to select LANGUAGE, then press OK button. Press K or L button to select PLAYER MENU, then OK button. Press K or L button to select a setting, then press OK button. Press SETUP button to exit.