ENGLISH 4 BAHASA MELAYU 15 INDONESIA 26 TING VIT 78

HQ6849

ENGLISH

Important

Read these instructions for use carefully before using the appliance and save them for future reference. Only use the mains cord supplied. Do not use a damaged mains cord. If the mains cord is damaged, always have it replaced by one of the original type in order to avoid a hazard. The appliance is equipped with an automatic voltage selector and is suitable for mains voltages ranging from 100 to 240 volts. Charge, store and use the appliance at a temperature between 5cC and 35cC. Do not recharge the shaver in a closed pouch. Keep the appliance and the mains cord dry.

Charging

Make sure the appliance is switched off before you start charging it. When you charge the shaver for the first time or after a long period of disuse, let it charge continuously for 4 hours. Charging normally takes approx. 1 hour. You can also shave without charging by connecting the shaver to the mains. Do not leave the appliance connected to the mains for more than 24 hours.
Charge indications Charging

CHARGE

you empty C As soon asgreenstart charging theon. shaver, the pilot light goes

Battery fully charged

the been fully C Whenpilotbattery has blinking. charged, the green light starts

Charging the appliance

Charge the appliance when the motor stops or starts running slower. Do not recharge the shaver in a closed pouch.
Put the appliance plug in the shaver. Put the mains plug in the wall socket. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver when the battery has been fully charged.

Cordless shaving time

A fully charged shaver has a cordless shaving time of up to 30 minutes.
Using the appliance Shaving
1 Switch the shaver on by pushing the on/off slide to position I.
Move the shaving heads quickly over your skin, making both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 3 Switch the shaver off by pushing the on/off slide to position 0. Put the protection cap on the shaver every time you have used it, to prevent damage.

Trimming

For grooming sideburns and moustache.
Open the trimmer by pushing the slide upwards. The trimmer can be activated while the motor is running.

Cleaning and maintenance

Regular cleaning guarantees better shaving performance.
C For easy and optimal cleaning, the Philips Action Clean (shaving head cleaner, type
HQ100) is available.Ask your Philips dealer for information. The Philips Action Clean may not be available in all countries. Contact the Customer Care Centre in your country about the availability of this accessory.
You can also clean the shaver in the following way:
Every week: shaving unit and hair chamber
1 Switch the shaver off, remove the mains plug from the wall socket and pull the appliance plug out of the shaver. Clean the top of the appliance first, using the brush supplied. Press the release button (1) and remove the shaving unit (2).
Clean the inside of the shaving unit and the hair chamber with the brush.
Put the shaving unit back onto the shaver.
Every two months: shaving heads
Switch the shaver off, remove the mains plug from the wall socket and pull the appliance plug out of the shaver. Press the release button (1) and remove the shaving unit (2). Turn the wheel anticlockwise (1) and remove the retaining frame (2).
Remove and clean the shaving heads (cutters and guards) one by one. Do not mix up the cutters and the guards. This is essential since each cutter has been ground with its corresponding guard for optimal performance. If you accidentally mix the sets up, it could take several weeks before optimal shaving performance is restored.
Clean the cutter with the short-bristled side of the brush. Brush carefully in the direction of the arrow.

Brush the guard.

Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving unit (1) and turn the wheel clockwise (2). Put the shaving unit back onto the shaver.
For extra thorough cleaning, clean the shaving heads by putting them in a degreasing liquid (e.g. alcohol) every six months.To remove the shaving heads, follow steps 1 to 4 described above. After cleaning, lubricate the central point on the inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads.

Trimmer

Clean the trimmer every time you have used it. 1 Switch the shaver off, remove the mains plug from the wall socket and pull the appliance plug out of the shaver.

Clean the trimmer with the brush supplied.
Lubricate the trimmer teeth with a drop of sewing machine oil every six months.

Storage

C Put the protection cap on the shaver to prevent damage.
The appliance can be stored in the pouch supplied.

Replacement

Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ55 Philips Super Reflex shaving heads only. 1
Switch the shaver off, remove the mains plug from the wall socket and pull the appliance plug out of the shaver. Press the release button (1) and remove the shaving unit (2).
Turn the wheel anticlockwise (1) and remove the retaining frame (2).
Remove the shaving heads and place new ones in the shaving unit.
Put the retaining frame back into the shaving unit (1) and turn the wheel clockwise (2). Put the shaving unit back onto the shaver.

Accessories

The following accessories are available: - HQ55 Philips Super Reflex shaving heads. - HQ100 Philips Action Clean (shaving head cleaner). - HQ101 Philips Action Clean refill (shaving head cleaning liquid). - HQ110 Philips shaving head cleaner (shaving head cleaning spray).

Environment

throw the away with the C Do not household appliancethe end of its life, normal waste at but hand it in at an official collection point for recycling. By doing this you will help to preserve the environment.

Disposal of the battery

The built-in rechargeable battery contains substances that may pollute the environment. Always remove the battery before discarding the appliance or handing it in at an official collection point. Dispose of the battery at an official collection point for batteries. If you have trouble removing the battery, you can also take the appliance to a Philips service centre, which will remove the battery for you and will dispose of it in an environmentally safe way. Only remove the battery if it is completely empty. 1 Remove the mains plug from the wall socket and pull the appliance plug out of the shaver. Let the shaver run until it stops, undo the screws and open the shaver. Remove the battery.
Do not connect the shaver to the mains again after the battery has been removed.

Guarantee & service

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV.

100 - 240 , 5cC 35cC

4 1

Philips
Philips Action Clean ( HQ100) Philips

B Philips Action Clean

(1) (2)

2-3

(1) (2)

( ) 6 1-4

HQ55 Philips Super Reflex

(1) (2)

: HQ55 Philips Super Reflex HQ100 Philips Action Clean () HQ101 Philips Action Clean refill () Philip HQ110 ()
www.philips.com ( ) Philips Domestic Appliances and Personal Care BV

B 1: B

'' ' 2 : '

c c

2006/02/07