Shaver

Service Service Service

Service Information

HQ 6890/A

QUADRA ACTION

Domestic Appliances and Personal Care
HINTS FOR REPAIRS - Remove the shaving unit, to prevent damages during repairs. - Remove screws A1 (2x, of which 1 is under trimmer slide). - Take cover with trimmer from housing. - Remove bracket (14 + 21). - The PC-board can now be removed from the housing. - Remove screws B1 (2x) the motor and hairchamber can now be removed from the housing. - Detach the motor clamping spings (item 17) on the bearing block with a small screwdriver. GENERAL Mainsshaver possible. Converts input voltage 8-16V dc to constant Charge current (NiHH 1100mA, NiCD 680mA) or Constant motorvoltage at mainsshave. Start-up voltage min. 11V. Open battery protection. Undervoltage protection. Temperature protection of battery (only NiMH). Charge condition of battery is managed by microcontroller. Charge current is regulated and discharge currents is measured. Charge condition of battery shown on LCD display (minutes left) with backlighting. Full indication with flashing (2Hz) of backlighting. Electronic on/off.
PRODUCTS MEETS THE REQUIREMENTS REGARDING INTERFERENCE SUPPRESION ON RADIO AND TELEVISION. - AFTER THE PRODUCT HAS BEEN REPAIRED IT SHOULD FUNCTION PROPERLY AND HAS TO MEET THE SAFETY REQUIREMENTS AS LAID DOWN OFFICIALLY ESTABLISHED AT THIS MOMENT.
TECHNICAL DATA Voltage Power consumption Motor voltage Power supply Speed of cutters Shaving heads Battery : : : : : : : 100-240 V 50/60Hz Motor depending 2.4 V SMPS > 2100 r.p.m. HQ6 - 10214 Green NiMH pack AA
SAP CODING: 99999 CAUTION! WHILE CHECKING THE P.C.-BOARD REMEMBER THAT MOST COMPONENTS AND MOTOR ARE ENERGIZED BY MAINS VOLTAGE.
Published by Philips Domestic Appliances and Personal Care
Printed in The Netherlands

Copyright reserved

Subject to modification

00145 99/12

PCS 104 742
10713 cleaning brush housing PH rubber seal power plug EU power plug E-EU power plug GB power plug J protecting cap head housing HQ6 shaving head power module retaining bracket hairchamber PH connecting pins gearwheel unit A 14657 sealing plate bracket small pinion motor motor clamp Zener diode trimmer trimmer slide bracket large spacer AA NiMH pack AA cover LCD complete holder s.t.screw spec/T8 B 14544 s.t.screw 1.8x18/Tpouch PH 11183 stand 16941 DFU (1) DFU (2) DFU (3) DFU (4) DFU (5)

522 10762

(1) GB D F NL E P I TR (2) GB D N S FIN DK GR (3) GB RUS UA HR SLO CZ SK H RO (4) GB RUS PL EST LV LT (5) J * 01960 Car cord

Philips Shaving heads

Precision cutting system

3 shaving heads

Keep a close shave
Change heads every 2 years for the best results
Every year, your blades travel the height of Mt. Everest. 49 times! After such a workout, even the best materials can lose their edge. Retain your shaver's peak performance replace the heads once every 2 years.
Comfortably close Super Lift & Cut shaving technology with dual blade system Shaves even the shortest stubble Precision Cutting System

Shaving heads

HQ6/40
Precision cutting system 3 shaving heads

Specifications

Shaving heads per packaging: 3 Fits product types: HQ6425, HQ6426, HQ6466, HQ6465, HQ6832, HQ6847, HQ6850, HQ6851, HQ6852, HQ6870, HQ6871, HQ6890, HQ6894, HQ7415, HQ7815, HQ7830, HQ7850, HQ7870, 6828XL, 6887XL, 7610X, 7616X, 7866XL,

Highlights

7886XL, HQ662, HQ663, HQ664, HQ686, HQ665, HQ6825, HQ6826, HQ6827, HQ6828, HQ6830, HQ6848, HQ6865, HQ6867, HQ6885, HQ6888, HQ6889, HQ6893, HQ7405, HQ7615, HQ7616, HQ7617, HQ7814, HQ7816, HQ7817, HQ7820, HQ7821, HQ7825, HQ7829, HQ7845, HQ7864, HQ7865, HQ7868, HQ7885
Super Lift & Cut technology
Dual blade system: first blade lifts, second blade cuts for a comfortable close shave.

Precision Cutting System

Ultra-thin heads with slots to shave long hairs and holes to shave the shortest stubble.
Issue date 2011-04-19 Version: 5.0.1
2011 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com

12 NC: 00000