Data Sheet

Outdoor Camera
Pre-assembled units with housing, camera and lens included Range of colour and monochrome units Choice of high performance Video 300 cameras Varifocal lenses allow Field of View to be selected on site Modern compact design Includes wall bracket for mounting
Introduction Housing, camera and lens combinations are frequently used where protection against the environment is required. In order to simplify and reduce the installation process time, the Philips Outdoor Camera can be used. They are supplied fully assembled with housing, camera and a Varifocal lens, which allows the final Field of View to be selected on site. This means that installation is simple, you only have to connect the supply and video cables, set the focus and the unit is ready for use. A wall bracket is also included in the package to enable mounting of the unit.
Cameras The Outdoor Cameras are based on the proven Video 300 series of cameras. These cameras are available in standard and high resolution versions, colour and monochrome and are for use in both CCIR/PAL and EIA/NTSC areas. The camera is supplied from a low voltage supply 11-36Vd.c. or 11-28 Va.c. As the complete unit comes fully assembled, no adjustments are required. Varifocal Lens The Varifocal lens supplied is the Passive, DC auto-iris lens LDH 6748/03. This lens is chosen because it covers most
applications. By including the lens, the stock holding for the installer is reduced. Also, because a Varifocal lens is used, the Field of View can be selected on site allowing optimum area coverage. Housing The modern compact housing is of a proven design that provides good protection against the elements and hostile environments. It can be used in a large variety of places such as shops, offices, petrol stations, industrial environments, travel and transport areas, in fact any general indoor and outdoor use.

LDH 13x0/10; LDH 13x0/60

Philips Communication & Security Systems
Outdoor Camera Types Version Outdoor Camera Standard Monochrome Standard Monochrome Standard Colour Standard Colour LDH 1350/10 LDH 1370/10 LDH 1360/10 LDH 1380/10 PAL/CCIR Based on Camera Type LDH 0350/00 LDH 0370/00 LDH 0360/00 LDH 0380/00 NTSC/EIA Outdoor Based on Camera Camera Type LDH 1350/60 LDH 1370/60 LDH 1360/60 LDH 1380/60 LDH 0350/60 LDH 0370/60 LDH 0360/60 LDH 0380/60

SPECIFICATIONS

Electrical TV Standard: /10 version /60 version CCD sensor Electronic iris Sensitivity Synchronisation Power supply: /10 version /60 version Lens Type Field of view (approx) Mechanical Dimensions External inc. Sunhood Wall stand Materials Housing base Housing + lens hood Window Sunhood Seals Colour Environmental Protection against dust and water Ambient temperature Operating Storage Wind velocity Operating Corrosion

: : : : : :

CCIR, 625 lines interlaced 50 Hz EIA, 525 lines interlaced 60 Hz 1/3 inch Inter Line Image Sensor control range 46 dB Camera dependent Mainslock, adjustable phase on 3-phase mains network.

: IEC 529, IP 55

: -15 to +40C : -40 to +70C
: 120 km/hr : IEC 68-2-42 Kc SO2 : IEC 68-2-43 Kd H2S : IEC 68-2-52 Kb : IEC 68-2-30 Db
: 220 V a.c., +/-15%, 50 Hz : 115 V a.c., +/-15%, 60 Hz
: F1.4, 3.5-8mm : 78 x 58 - 35 x 26 *
Salt mist Temperature/humidity (21 days at 40C)
: 270 x 110 x 89 mm : 270 x 114 x 95.5 mm : Included

Vibration

: IEC 68-2-6 Fc (10-58 Hz 0.15 mm amplitude, 58-150 Hz 2g, 3 directions) : IEC 68-2-29 Eb (1000 bumps, 10 g 16 ms, 3 directions) : Acc. to IEC 65 and BS 415, class I
28711 96-10 Data subject to change without notice 1996 Philips Electronics N.V. This document is printed on chlorine free produced paper.
Bump : : : : : : aluminium alloy - die-cast ASA Metacrylate white PVC EPDM rubber light grey/black lens hood

Safety

* When lens is set to focal length 4.5 min, the black lens hood should not be used.
For detailed Camera & Lens Specifications refer to the respective Data Sheets.