CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM ADVARSEL SYNLIG OG USYNLIG LASERSTRLING VED BNING UNDG UDSTTELSE FOR STRLING VARNING SYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD BETRAKTA EJ STRLEN VARO! AVATTAESSA OLET ALTTIINA NKYVLLE JA NKYMTTMLLE LASER STEILYLLE. L KATSO STEESEEN VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEFFNET NICHT DEM STRAHL AUSSETSEN ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS DOUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU

Contents

Instruction and General Information
Features... 7 Discs for playback... 7

Region Codes

Operations
Discs information.. 21 Basic playback.. 21
Skipping to another title (track) /chapter Fast Search Continue playback from the last stop point Repeat play Repeat A-B Program favorite tracks
Supplied accessories.. 7 Environmental information... 7 Care and safety information.. 8
Special DVD/VCD features.. 22 ~24

Connections

Placing the speakers and subwoofers.. 8 Connecting speakers and subwoofer.. 9 Connecting AD905W Wireless System.. 9

(Only for LX3750W)

Connecting TV... 10 Connecting FM/MW antennas.. 10 Connecting the power cord... 11 Connecting a VCR or Cable Satellite Box.. 11 Connecting digital audio equipment.. 12 AD905W Wireless System.. 13
Changing subtitle language Changing sound track language Playing in slow motion mode Searching for a particular passage Display the disc information during playback Moving to another title(track)/chapter Playback from a selected point Zooming in Viewing from another angle Advancing by frames Checking the contents of DVD
Special VCD/SVCD features... 24

Playback Control (PBC)

MP3/Picture Disc Operations Functional Overview
Front panels... 14 Rear panel... 15 Remote Control.. 16 Playing MP3 / Picture disc... 25

(Kodak, JPEG)

Other Functions
Tuning to radio stations.. 26 Presetting radio stations.. 26 Listening to preset radio stations.. 26 Sleep timer setting... 26

Preparations

Inserting batteries into the remote control. 17 Switching on the system.. 17 System Setup (DVD)... 18~20
General operation Setting the picture Setting the sound Setting the language Setting the features
Sound and Volume Controls
Selecting the surround sound mode.. 27 Selecting the digital sound effect.. 27 Volume control... 28 Dimming the display screen.. 28
Specifications.. 29 Troubleshooting.. 30

C ONTENTS

Features
Your complete 7-piece 300-Watt Ultra Slim DVD Digital Home Cinema System with 6 channels full digital amplifier creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology. Other features include: Built-in DTS and Dolby Digital decoder, supporting Dolby Pro Logic, Dolby Pro Logic II and virtual surround Lets you use the Home Cinema Audio System for a movietheater surround sound experience. Additional Component Connections Lets you connect other audio and audio/visual components to the DVD system so you can use the systems surround sound speakers. Night Mode Lets you compress the dynamic range, reducing the difference in loudness between different sounds in Dolby Digital mode. Parental Control (Rating Level) Lets you set a ratings level so that your children cannot watch a DVD that has a rating higher than you set. Sleep Timer Enables the system to switch to standby mode automatically at a preset time. Wireless (Only for LX3750W) Enables you to enjoy the Home Cinema Audio System with wireless connection between the system & rear speakers. Region Codes DVDs must be labeled for ALL region or for Region 2 in order to play on this DVD system. You cannot play discs that are labeled for other regions.

Note: If you are having trouble playing a certain disc, remove the disc and try a different one. Improper formatted discs will not play on this DVD system.

Supplied Accessories

a SCART cable for connection with your TV one audio (white, red) and one composite video(yellow) cable a remote control with two AA batteries an MW loop antenna and an FM wire antenna five satellite speakers and a subwoofer and six speaker cables four small speaker stands for the front and rear speakers four wall brackets with screws for the front and rear speakers this instruction booklet and a Quick Use Guide AD905W Wireless System (Only for LX3750W): one AD905WT wireless transmitter one AD905WA wireless receiver one 14V adapter one table stand for wireless receiver

Discs for playback

Your DVD home cinema system will play : Digital Video Discs (DVDs) Video CDs (VCDs) Super Video CDs (SVCDs) Digital Video Discs + Rewritable (DVD+RW) Compact Discs (CDs) Picture (Kodak, JPEG) files on CDR (W) Supported MP3-CD format. ISO 9660 / UDF format. Maximum12 characters display Maximum nested directory is 8 levels Maximum album number is 32 Maximum title number is 999 Supported sampling frequencies: 32 kHz. 44.1 kHz, 48 kHz Supported Bit-rates: 32~256 (kbps). Variable Bit-rates
If any item is damaged or missing, contact your retailer or Philips.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

I NSTRUCTION

G ENERAL I NFORMATION

General Information

Step 1: Placing the speakers and subwoofers
Care and safety information
Avoid high temperatures, moisture, water and dust. Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight.) Always keep the disc tray closed to avoid dust on the lens. Avoid condensation problem The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the player in the warm environment until the moisture evaporates. Do not block the vents Do not operate the DVD system in an enclosed cabinet, allow about 10 cm (4 inches) of free space all around the player for adequate ventilation.

10 cm (4 inches)

For best possible surround sound, all the speakers (exept subwoofer) should be placed at the same distance from the listening position. 1 Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45 degrees from the listening position. 2 Place the centre speaker above the TV or the DVD system so the centre channels sound is localized. 3 Place the surround speakers at normal listening ear level facing each other. 4 Place the subwoofer on the floor near the TV. Notes: To avoid magnetic interference, do not position the front speakers too close to your TV. Allow adequate ventilation around the DVD system.

PHILIPS

DVD Home Cinema System
Care of disc To clean a CD, wipe it in a straight line from the center towards the edge using a soft, lint-free cloth. A cleaning agent may damage the disc. Write only on the printed side of a CDR(W) and only with a soft felt-tipped pen. Handle the disc by its edge, do not touch the surface. Care of cabinet Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Finding a suitable location Place the player on a flat, hard, and stable surface.

C ONNECTIONS

Step 2: Connecting speakers and subwoofer Step 3: Connecting AD905W Wireless System (Only for LX3750W)

AUDIO OUT

WOOFER LINE OUT

DIGITAL

COMPONENT VIDEO OUT

Pr/Cr Pb/Cb

SPEAKERS (8 )

OPTICAL COAXIAL

Rear Speaker Rear Speaker (Surround Right) (Surround Left)
AD905WA WIRELESS RELEIVER
AD905WT WIRELESS TRANSMITTER
Connect the supplied speaker system using the supplied speaker cables by matching the colours of the jacks and speaker plugs. Fully insert the plugs of speaker wire into the jacks on the DVD system. Speakers / Subwoofer Front Left (L) Front Right (R) Center Surround (Rear) Left (L) Surround (Rear) Right (R) Subwoofer
black black black black black black
white red green blue grey purple
1 Connect the supplied Surround Speaker system using the supplied speaker cables to the speaker jacks on the AD905WA WIRELESS RECEIVER by matching the colours of the jacks and speaker plugs. Extend the RECEIVER antenna. 2 Connect the AD905WT WIRELESS TRANSMITTERs speaker cables to the speaker jacks on the DVD system. Extend the TRANSMITTER antenna. Notes Adjust the position of the antennas for optimal reception. Position the antennas as far as possible from your TV,VCR or other radiation sources to prevent unwanted interference. To prevent unwanted noise, do not place the AD905W wireless system too close to the DVD system, AC power adapter,TV or other radiation sources.
Notes: Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to shortcircuit. Do not connect more than one speaker to any one pair of +/- speaker jacks. Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

Step 4: Connecting TV

Rear of TV

(example only)

SCART IN
Step 5: Connecting FM/MW antennas

S-VIDEO IN SCART IN

VIDEO IN

FM Antenna

MW Antenna

C FL SR SL SW

VIDEO OUT

A/V SCART OUT

S-VIDEO VIDEO

Fix the claw to the slot

AC MAINS~
AUDIO IN AUDIO OUT ANTENNA
IMPORTANT! You only need to make one video connection from the following options, depending on the capabilities of your TV system. Connect the DVD system directly to the TV. Scart Video connection provides higher picture quality. This option must be available on your TV. S-Video connection provides better picture quality. This option must be available on your TV. Using Scart jack Use the scart video cable (black) to connect the DVD systems A/V SCART OUT jack to the corresponding Scart input jack on the TV. OR Using Composite Video jack (VIDEO) Use the composite video cable (yellow) to connect the DVD systems VIDEO jack to the video input jack (or labelled as A/V In, Video In, Composite or Baseband) on the TV. OR Using S-Video jack Use the S-video cable (not supplied) to connect the DVD systems S-VIDEO jack to the S-Video input jack (or labelled as Y/C or S-VHS) on the TV. If your TV is not equipped with a SCART To hear the TV channels through this DVD system, use the audio cables (white/red) to connect AUDIO IN-AUX jacks to the corresponding AUDIO OUT jacks on the TV. Before starting operation, press AUX/DI on the remote to select AUX-ANA in order to activate the input source.

FM (75 )

SPEAKERS

AUX OPTICAL COAXIAL

1 Connect the supplied MW loop antenna to the MW jack. Place the MW loop antenna on a shelf or attach it to a stand or wall. 2 Connect the supplied FM antenna to the FM jack. Extend the FM antenna and fix its ends to the wall. For better FM stereo reception, connect an external FM antenna (not supplied).

MW FM (75 )

Notes: Adjust the position of the antennas for optimal reception. Position the antennas as far as possible from your TV,VCR or other radiation sources to prevent unwanted interference.
Step 6: Connecting the power cord
After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on.
Step 7: Connecting a VCR or Cable /Satellite Box

OUT IN

ANT IN
VCR or Cable/Satellite Box

AUDIO IN AUDIO OUT

Viewing and listening to the playback

~ AC MAINS

1 Connect the VCR or Cable/Satellite Box to the TV as shown. 2 Connect the DVD systems AUDIO IN-AUX jacks to the AUDIO OUT jacks on the VCR or cable / satellite box. Before starting operation, press AUX/DI on the remote to select AUX-ANA in order to activate the input source. Recording DVDs Some DVDs are copy-protected. You cannot record or dub protected discs using a VCR. 3 Connect the DVD systems VIDEO jack to the VIDEO IN jack on the VCR.
4 Connect the DVD systems AUDIO OUT jacks to the AUDIO IN jacks on the VCR. This will allow you to make analogue stereo (two channel, right and left) recordings. To view DVD playback while recording. You must connect the DVD system to your TV using the SCART or the SVIDEO connection.
IMPORTANT! The type plate is located at the bottom of the system. This product complies with the radio interference requirements of the European Community.
The apparatus shall not be expose to dripping or splashing and that no objects filled with liquid such as vase shall be placed on the apparatus. To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it.

C ONNECTIONS 11

Step 8: Connecting digital audio equipment

DIGITAL IN

DIGITAL OUT
(for exampler) CD Recorder
Listening to the playback 1 Connect the DVD systems DIGITAL IN jack to the DIGITAL OUT jack on a digital audio device. Before starting operation, press AUX/DI on the remote to select AUX-DI in order to activate the input source. Recording (digital) 2 Connect the DVD systems DIGITAL OUT (COAXIAL or OPTICAL) jack to the DIGITAL IN jack on a digital recording device (DTS-Digital Theatre System compatible, with a Dolby Digital decoder, for example). Before starting operation, set the DIGITAL OUTPUT according to the audio connection. (See page 19 Setting the Sound - Digital Output). Notes: Always refer to the owners manual of the other equipment for complete connection and use details.
Introduction and General Information

AD905W Wireless System (Only for LX3750W)
The AD905W accessory gives you the option for wireless speaker connection. Please check you have all the supplied parts for your AD905W wireless set: x AD905WT WIRELESS TRANSMITTER 1 x AD905WA WIRELESS RECEIVER 1 x 14V adapter 1 x table stand Place both the AD905WT WIRELESS TRANSMITTER and AD905WA WIRELESS RECEIVER off the ground (recommended minimum height of 30cm). Avoid placing the AD905WT WIRELESS TRANSMITTER too close to your DVD receiver, AC power adapter, TV or other electrical equipment as it may cause electrical interference. In case of sound distortion, please select another channel for both the AD905WA WIRELESS RECEIVER and AD905WT WIRELESS TRANSMITTER. The distortion could be the result of interference caused by other equipment using same frequency channel in your house or neighbourhood. Notes After you switch off your DVD system, the AD905WT WIRELESS TRANSMITTER automatically enters standby mode and the red power indicator eventually comes out. On receiving an incoming audio signal from your DVD system again, the AD905WT WIRELESS TRANSMITTER automatically powers up. When the AD905WA WIRELESS RECEIVER enters the Ecopower standby mode, the power indicator lights up red.

RECEIVER

Remove the PHILIPS cover from the AD905WA WIRELESS as shown in Fig. 1, to access the connection terminal. Connect your rear speaker terminals with the corresponding color terminals on the AD905WA

WIRELESS RECEIVER

Insert the table stand into the brackets as shown in Fig.2. Connect the AD905WA WIRELESS RECEIVER power cord to your power supply. Check / adjust the AD905WA WIRELESS RECEIVER OFFON switch to the ON position (see Fig.1). The AD905WA WIRELESS RECEIVER power indicator lights up green. Connect the 14V power adapter to the AD905WT and power supply as shown in Fig. 3. Make sure you position both the AD905WT WIRELESS and AD905WA WIRELESS RECEIVER at least 2 meters apart.

WIRELESS TRANSMITTER

TRANSMITTER

Connect and carefully match the AD905WT WIRELESS inputs to the corresponding surround speaker jacks on your LX3750W DVD system. The AD905WT WIRELESS TRANSMITTER power indicator lights up red.
Check and adjust the 4-channel toggle switch on the AD905WT WIRELESS TRANSMITTER and AD905WA WIRELESS RECEIVER (CHANNEL SELECTOR switch), so that both units are using the same channel. On your LX3750W DVD system, play an audio source and activate the surround sound mode option. Adjust the volume to reproduce surround sound in the rear speakers.
10 Extend the antenna vertically on both the AD905WT WIRELESS TRANSMITTER and AD905WA WIRELESS RECEIVER to improve reception. Check the antennas are safely positioned without obstruction. To ensure quality sound production and transmission

I NTRODUCTION

G ENERAL I NFORMATION 13

Functional Overview

Front panels

Front view

Top view

Side view

1 OPEN / CLOSE

7 STANDBY-ON

to switch between power on and standby modes. to star t or interrupt disc playback. to stop playing the disc.
to open or close the disc tray. Disc Tray SOURCE to select the relevant active mode: TV/AV, DISC, TUNER or AUX/DI. SURROUND to select multichannel surround (Dolby Digital, DTS, VSS Dolby ProLogic or Dolby ProLogic II) or stereo sound effect. PROGRAM in Disc mode, to program disc tracks. in Tuner mode, to program preset radio station. VOLUME to adjust the master volume.
8 PLAY / PAUSE (in Disc mode only) 9 STOP (in disc mode only) 0 SEARCH S / T
in Disc mode, press to skip to the previous/next chapter/ track. in Disc mode, hold down to fast reverse/forward the disc. in Tuner mode, to tune to a lower or higher radio frequency. !n to connect headphones.

F UNCTIONAL O VERVIEW

Rear panel

7 DIGITAL IN

1 MW / FM ANTENNA
connect to the MW loop antenna or FM antenna.
connect from an audio equipment with digital audio output.

2 AUDIO IN -AUX

connect to the analog audio outputs of a TV or VCR. 3 AUDIO OUT connect to the analog audio inputs of an external recording device or amplifier.

8 SPEAKERS

connect to the front,center, rear (surround) and subwoofer speakers. 9 A/V SCART OUT connect to TV with SCART input. 0 S-VIDEO OUT connect to a TV with S-video input.

4 WOOFER LINE OUT

connect to an active subwoofer (Optional). connect to an audio equipment with digital (optical) audio input. connect to an audio equipment with digital (coaxial) audio input.

5 DIGITAL OUT - OPTICAL 6 DIGITAL OUT - COAXIAL

! VIDEO OUT

connect to a TV with video input. connect to a standard AC outlet.

@ AC Power Cord

Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

F UNCTIONAL O VERVIEW 15

Remote Control
to select movement direction in disc contents menu/ system menu bar. in Disc mode, press to skip to the previous/next chapter/ track. in Disc mode, hold down to fast reverse/forward the disc. in Tuner mode, to tune to a lower or higher radio frequency. to star t or interrupt disc playback. to stop playing the disc. to select multichannel surround (Dolby Digital, DTS, VSS, Dolby Pro Logic or Dolby Pro Logic II) or stereo sound effect. to select the various sound effect : CONCERT, DRAMA, ACTION, SCI-FI, CLASSIC, JAZZ, ROCK or DIGITAL. to repeat chapter, title, track, album or disc. to repeat a specific section on a disc. to switch to standby mode. to enter a track/title number of the disc. to enter a number of preset radio stations. to adjust the volume level. to exit or confirm the selection. to continue disc playback after an interruption. to interrupt or resume sound reproduction. to optimize the dynamic of the sound output. to select different brightness for the display screen. to set the sleep (auto-off) timer function. to adjust the subwoofers level. REAR +/to adjust the rear speakers level. CENTER +/to adjust the center speakers level. TV +/to adjust Philipss television volume level.

5 S / T

0 ! $ % ^ & * ( )

8 SURROUND

9 SOUND 0 REPEAT
! REPEAT A-B @ POWER y # Numeric Keypad (0-9) $ VOL +/% OK
Notes for remote control: First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or TUNER, for example). Then select the desired function (, S , T for example).

^ RESUME

& MUTE * NIGHT (Dolby Digital mode only) ( DIM ) SLEEP SUBW +/-

1 SOURCE

to select the relevant active mode: TV/AV, DISC, TUNER or AUX/DI. TUNER: toggles between FM and MW band. AUX/DI: toggles between AUX-ANA and AUX-DIG (Digital Input) mode. to enter or exit the disc contents menu. to enter or exit the system menu bar. in Tuner mode, to select a preset radio station number (1 or 2).
2 DISC MENU (disc mode only)
3 SYSTEM MENU (disc mode only) / 4 /1 / 2
Inserting batteries into the remote control
1 Open the battery compartment. 2 Place the batteries in the
compartment with the correct polarity as indicated by + and - symbols.

Switching on the system

IMPORTANT! Make sure you have completed all the necessary connections. (See page 10 Connecting TV)
1 Press STANDBY ON to switch on the system. 2 Press SOURCE until DISC appears on the display panel

(or press DISC on the remote).

3 Close the cover.

CAUTION! Remove batteries if they are exhausted or will not be used for a long time. Do not use old and new or different types of batteries in combination. Batteries contain chemical substances, so they should be disposed off properly.
3 Turn on the TV and set to the correct video-in channel. You
should see the blue Philips DVD background screen on the TV. Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details. Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. Or, the TV remote control may have a button or switch that chooses different video modes. Or, set the TV to channel 3 or 4 if you are using an RF modulator. If you do not get a proper picture or sound, please refer to System Setup (DVD) in order to change the pre-settings as necessary to accommodate your TV system or change to your preferred settings.

P REPARATIONS 17

System Setup (DVD)
The system setup is carried out via the TV, it enables you to customize the DVD system to suit your particular requirement. If the preferred options selected are not available on a disc, then the discs own preference will be used. IMPORTANT ! To access the System Setup menu, playback must be stopped. The default setting is underlined. General operation

Setting the picture

TV Shape Select the aspect ratio of the TV to be connected. 4:3 PS (Pan and Scan mode ) If you have a conventional TV set and your DVD is not formatted for widescreen viewing, use this setting. A wide picture is displayed on the whole TV screen with a portion automatically cut off. 4:3 LB (Letterbox mode ) If you have a conventional TV set and your DVD is formatted for widescreen viewing, use this setting. A wide picture with bands displayed on the upper and lower portions of the TV screen. 16:9 (Wide screen mode) If you have a widescreen TV set, use this setting (you must also set your widescreen TV to full size) available on a disc, then the discs own preference will be used. Notes: The format you select must be available on the disc. If it is not, the setting for TV Shape will not affect the picture during playback.

P REPARATIONS 19

Setting the language Parental control is not activated, it will play all discs. Rating - 1 to 9 If the players parental level is set below 9, only discs with a lower or equal level will play. For example, if the player is set to 5, only discs with ratings of 5, 4, 3, 2 and 1 will be played. Higher rated scenes will not be played unless an alternative which has the same rating or lower is available on the disc. For example, consider a disc that generally is suitable for most audiences, and it is rated at level 2 for the most part. However, in the middle, there are also scenes rated at 5 (not suitable for children). NO PARENTAL It will play all discs. 8 ADULT Mature material; should be viewed only by adults due to graphic sexual material, violence, or language. 7 NC-17 No children under age 17; not recommended viewing for children under age 17. 6 PG-R Parental Guidance - Restricted; recommended that parents restrict children under 17 from viewing or allow to view only when supervised by a parent or adult guardian. 4 PG13 Material is unsuitable for children under age 13. 3 PG Parental Guidance suggested. 1 G General Audience; recommended as acceptable for viewers of all ages.
Audio Subtitle Disc Menu This is to select the audio language, subtitle language and the language used on TV screen menus or DVD menus which will always be used for every disc to be played back. The default setting is English. If the language selected is not available on the disc, the original language designated by each disc will be selected. Setting the features

Parental

To play a higher rated disc or scene than the level set Enter the 4-digit code before resetting the rating level to a higher number (go to Password). Enables setting of playback limitation level. Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc, the rating levels are from 1 to 9 and are country dependent. You can prohibit the playing of certain discs which are not suitable for your children or to have certain discs played with alternative scenes. The parental default initial setting is 6 PG-R. If you forget the 4-digit code

Specifications subject to change without prior notice
Philips Industrial Activities nv declares that the LX3700D & LX3750W DVD HOME CINEMA SYSTEMs are in conformity with the essential requirements and other relevant standards of the directive 1999/5/EG.

S PECIFICATIONS 29

Troubleshooting
WARNING! Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to solve a problem by following these hints, consult your dealer or service center.
Problem No power. No picture. Solution Check if the AC power cord is properly connected. Select the appropriate video input mode on the TV. Check if the TV is switched on. Check the video connection. Check the system is securely connected. Sometimes a small amount of picture distortion may appear. This is not a malfunction. Clean the disc. Connect the system to TVs S-video input. The aspect ratio is fixed on the DVD disc. Depending on the TV, it may not allow to change the aspect ratio. Adjust the volume. Check that the speakers are connected correctly. Replace the speaker cables. Check the speaker settings. The system is in pause, slow motion or fast forward/reverse mode, press PLAY to resume normal play mode. Use the CENTER +/- or REAR+/- to adjust the volume level. Check that the center or rear surround speakers is connected correctly. Use surround mode. Insert a readable disc. Check the disc type, color system and region code. Clean the disc. Place the disc with the playback side down. Press SYSTEM MENU to turn off the setup menu screen. Cancel the parental control rating function or change the rating level. Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. Disconnect the power plug from the outlet, and insert again.
Distorted or poor picture.
The aspect ratio of the screen cannot be changed even though you have set the TV shape. No sound or distorted sound.

No sound is heard from the center or rear speakers. The DVD player does not start playback.
The DVD system does not respond when the buttons are pressed. The language for the sound or subtitle cannot be changed when playing a DVD. No image is output when a function is selected. Considerable noise in radio broadcasts.
Multi-language sound or subtitle is not recorded on the DVD. Changing the language for the sound or subtitle is prohibited on the DVD. Make sure the component is connected correctly. Press the correct function button for the input source. Tune in the correct frequency. Connect the antenna. Route RF (AC-3) and digital cables away from the antenna terminals and wires. Fully extend the FM wire antenna. Position for best reception and secure to a wall. Connect an outdoor FM antenna. Adjust the direction and position for best reception. Connect an additional or external MW antenna. Turn off the equipment causing the noise or move it away from the DVD system. Place the antenna farther away from the equipment causing the noise. Point the remote control at the remote sensor of the unit. Reduce the distance to the player. Remove any possible obstacles. Replace the batteries with new ones. Check that the batteries are loaded correctly. Press DIM again. Place the DVD system as far away as possible from electric devices with interference. Check all speakers for correct polarity.
The remote control does not function.
The display is dark. Low hum or buzz sound. Low bass response.

30 T ROUBLESHOOTING

Ultra Slim DVD Home Entertainment System
Total Immersion in Movies
Clean Set-up Wireless connection between system and rear speakers Digital multichannel sound DTS, Dolby Digital 5.1, Dolby Pro Logic II, MPEG Multichannel 6 channel full digital amplifier Digital Input Clear width & depth in sound 5 Full range triple driver satellite speakers Plays DVD (+RW), CD (RW), MP3-CD, (S)VCD
standard product information
dvd Plays CD, CD-RW, MP3-CD*, (S)VCD, DVD, DVD+RW, Picture CD (Kodak, JPEG) Parental control Repeat A-B, Resume, Zoom, Angle, Slow motion Play modes (repeat/program) * Plays MP3-CD (supports 32, 56, 64, 96, 128, 256, 320 kbps and variable bit rate) tuner FM/MW Digital tuning with 40 presets RDS station name sound Digital Sound Modes (rock, digital, jazz, classic, drama, action sci-fi, concert) Matrix, Dolby Digital, Dolby Prologic II, DTS, MPEG Multichannel Virtual Surround Sound amplifier 6 x 50 watts RMS 300 watts Total Power wireless system For surround LSB's Frequency 864 MHz 4 RF channel selector switch loudspeaker boxes 5 Full Range triple driver satellite speakers Subwoofer
connections Audio input: - analog : AUX - digital : 1 x cinch - SCART (audio bi-directional) Audio output: - analog : Line out (cinch) - Subwoofer Pre-out (cinch) - digital : 1 x cinch, 1 x optical Video output: - Composite (cinch) - S-Video (Hosiden) - SCART (CVBS + RGB) Headphone : 3.5mm chrome plated Antenna : FM coxial, AM loop Speakers : socket connectors general FTD, On Screen Display, 3 step Dim mode 45 keys Remote Control Eco power standby mode (<1 watt)

remote control

physical info
EAN: (/22S) EAN: (/25S) Product Dimensions: 390mm W x 55mm H x 399mm D (DVD system) 88mm W x 293mm H x 88mm D (front l/r) 72mm W x 283mm H x 72mm D (surround) 280mm W x 79mm H x 72mm D (center speaker) 130mm W x 328mm H x 376mm D (subwoofer) 131mm W x 34mm H x 130mm D (transmitter) 207mm W x 55mm H x 186mm D (receiver) Package Dimensions: 580mm W x 412mm H x 490mm D (t.b.c.) Package weight : t.b.c. Carton contains: DVD Home Entertainment System, MultiFunction Remote Control, Operating Instructions, Warranty Information
Printed in Singapore Date Printed : Nov 2002 Specifications subject to change without notice. 2002 Koninklijke Philips Electronics N. V. All rights reserved. http://www.audio.philips.com