Reviews & Opinions
Independent and trusted. Read before buy Philips LX700-22S!

Philips LX700-22S

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (French)
Philips LX700-22S, size: 363 KB
Related manuals
Philips LX700/22S

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Philips LX700-22SAbout Philips LX700-22S
Here you can find all about Philips LX700-22S like manual and other informations. For example: review.

Philips LX700-22S manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Philips LX700-22S please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Philips LX700-22S photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 8. Page 1 of 1. Average Rating:
robbielink 12:10am on Monday, August 16th, 2010 
iPhone WiFi Hack iPhone WiFi Hack ; VISIT : http://iphonewifi.blogspot.com iPhone WiFi Hack ; VISIT : http://iphonewifi.blogspot.com The ipod touch is a very handy device that is a lot of fun as well. Despite some minor hardware omissions and issues.
Oles 6:36pm on Wednesday, August 4th, 2010 
Vanns has great customer service. Vanns emplyees know about their products. Fast delivery. I have had no problems with my new touch. From internet surfing to music this is quite the device. I am very happy with my purchase.
CarJay 5:26pm on Monday, June 28th, 2010 
Music and Movies Great Sound, Easy To Set Up, Sleek/Compact, Lots of Storage, Long Battery Life Never owned anything like the apple touch - love it. Great Sound, Easy To Set Up, Sleek/Compact, Lots of Storage, Reliable Performance.
jchortala 7:47am on Tuesday, June 15th, 2010 
Good deal Amazon is usually cheaper than any stores. The delivery is very fast. Its has 6.65gb when i got it it shipped really fast and everything on the touch is normal nothing out of place Must reconmmed
kemps 7:40am on Tuesday, May 18th, 2010 
Exactly what I needed so I have my music, e-books, and apps in one place, thats not my phone Battery life is a little cheezy. BUY IT NOW! Kings Grunt Forever MPC DC Well i recieved this for christmas last year and since then it has gone just about everywhere with me.
dmk 3:34am on Wednesday, April 21st, 2010 
This model of the touch, easily handles the storage and management of about 400 compact discs worth of music, with about 16 gb leftover. this product with phone would be great. Easy To Set Up,Great Sound,Long Battery Life,Lots of Storage,Simple Controls,Sleek/Compact Big upgrade for me from Palm Pilot that was over 5 years old.
joeberry 9:46pm on Tuesday, April 20th, 2010 
All in all, this is a great device. I love how intuitive and easy to use it is. The way this handles pictures, music, video. The iTouch easily connects to wireless networks, even with WEP encryption. I use it on my encrypted network at home, at school.
superperson 8:19am on Thursday, April 8th, 2010 
iPod touch This ipod is absolutely AMAZING!! i love it, i love it,, and did i mention that i love it.. thanks i really appreciate it. great product...worth every penny the iPod touch is worth every penny. i purchased the 64 gb version and i really enjoy it.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Digital Home Cinema System

Important Note

Important notes for users in the U.K.
Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fix new fuse which should be a BSAmp, A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed off to avoid a possible shock hazaed should it be inserted into a 13 amp socket elsewhere. Manufactured under license from Dolby Laboratories. Dolby, Prologic and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. 1992-1999 Dolby Laboratories, Inc. All rights reserved. MANUFACTURED UNDER LICENSE FROM DIGITAL THEATER SYSTEMS, INC. US PAT. NO 5,451,942, 5,956,674, 5,974,380, 5,978,762 AND OTHER WORLDWIDE PATENTS ISSUED AND PENDING. DTS AND DTS DIGITAL SURROUND ARE RESISTERED TRADEMARKS OF DIGITAL THEATER SYSTEMS, INC. COPYRIGHT 1996, 2000 DIGITAL THEATER SYSTEMS, INC. ALL RIGHTS RESERVED.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN ' AVIS : RISQUE DE CHOC ELECTRIQUE PAS OUVRIR.
How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N) Brown = live (L) As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: - Connect the blue wire to the terminal marked n or coloured black. - Connect the brown wire to the terminal marked N or coloured red. - Do not connect either wire to the earth terminal in the plug, marked E (or ) or coloured green (or green and yellow). Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.
This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the products encasement that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Italia

DICHIARAZIONE DI CONFORMITA Si dichiara che lapparecchio LX-700D Philips risponde alle prescrizioni dellart. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. Fatto a Eindhoven
Copyright in the U.K. Recording and playback of material may require consent. See Copyright Act 1956 and the Performers Protection Act 1958 to 1972.
Philips Consumer Electronics Philips, Glaslaan JB Eindhoven, The Netherlands

Norge CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Typeskilt finnes p apparatens underside. Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet s lenge apparatet er tilsluttet nettkontakten. For redusere faren for brann eller elektrisk stt, skal apparatet ikke utsettes for regn eller fuktighet. 2

I MPORTANT N OTE

English -------------------------------------------------------- 4
Franais ------------------------------------------------------ 17
Espaol ------------------------------------------------------ 30
Deutsch ----------------------------------------------------- 43
Nederlands ------------------------------------------------- 56
Italiano ------------------------------------------------------- 69
Svenska ------------------------------------------------------ 82
Dansk -------------------------------------------------------- 95
Suomi ------------------------------------------------------ 108
Portugus ------------------------------------------------- 121
-------------------------------------------------- 134
Polski------------------------------------------------------- 147
------------------------------------------------------------- 160 I NDEX

Polski

Portugus

Svenska

Italianlo

Nederlands

Deutsch

Espaol

Franais

English

Contents
Introduction and General Information
Features... 5 Supplied accessories.. 5 Environmental information... 5 Installation... 5 Maintenance.. 5

Other Functions

System Setup... 13
Center delay Rear delay Test tone Digital input Menu off

Functional Overview

Front and Rear panels.. 6 Remote Control... 7
Tuning to radio stations.. 14 Presetting radio stations.. 14 Sleep timer setting... 14 Night mode functions... 14

Connections

Connecting the speakers.. 8 Connecting antennas... 9
MW Indoor Loop Antenna FM Indoor Antenna FM Outdoor Antenna
Troubleshooting.. 15 Specifications.. 16
Connecting from a DVD and additional components.... 9

Preparations

Inserting batteries into the remote control. 10 Setting up the surround sound system.. 10

Placing the speakers

Switching on the system.. 10

Basic Functions

Selecting the surround mode.. 11 Selecting the digital sound effect.. 11 Dimming the display screen.. 11 Volume control... 12
Changing the volume level To switch off the volume temporarily To listen through the headphones

Adjusting the tone.. 12

Energy Star As an ENERGY STARR Partner, Philips has determined that this product meets the ENERGY STARR guidelines for energy efficiency.
This product complies with the radio interference requirements of the European Community.

C ONTENTS

Features
The LX700 Digital Home Cinema System creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theatre technology. Features include: Building-in DTS and Dolby Digital decoder, supporting Dolby ProLogic II and virtual surround Use the Home Cinema Audio System for a movie-theatre surround sound experience. Additional Component Connections Lets you connect other audio and audio/visual components to the Receiver so you can use the systems surround sound speakers. Night Mode Lets you compress the dynamic range, reducing the difference in volume between different sounds in Dolby Digital mode. Sleep Timer Enables the system to switch to standby mode automatically at a preset time.

Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Installation

If you have stacked the components of your system, the receiver must be on top. Place the receiver on a flat, hard, stable surface. Do not cover any vents and leave 10 cm above and 10 cm left and right of the receiver free for ventilation.

Maintenance

Do not expose the receiver or batteries to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep the disc tray closed to avoid dust on the lens. Do not use solvents such as benzene, thinner, commercially available cleaners, anti-static spray intended for colour discs.

Supplied Accessories

a remote control with two AA batteries. a MW loop antenna and an FM wire antenna. audio connection cables. five satellite speakers, including five speaker cables. a passive subwoofer, including a speaker cable. a power cable for connection with the main unit. 4 speaker brackets and 4 screws, 4 mini speaker stands and 8 screws Instruction booklet Gettng Started Guide
If any item is damaged or missing, please contact your retailer or Philips dealer.

I NTRODUCTION

G ENERAL I NFORMATION

Front and Rear panels

6 CHANNEL INPUT

1 SURROUND

7 PROGRAM
to select multichannel surround(Dolby Digital, DTS, Dolby Pro Logic or Dolby Pro Logic II) or stereo sound effect. TUNING S T to select the tuner frequency. BASS to select bass adjustment mode. TREBLE to select treble adjustment mode. STANDBY ON y to switch between power on and standby mode. DISPLAY SCREEN shows the status of the system.
in Tuner mode, to program MW/FM stations.

8 SOURCE

to select the desired source or external input source (TV/AV, DISC DI, DISC 6CH, TUNER or AUX). 9 VOLUME to adjust the master volume. 0 PHONE to connect headphones.

AC MAINS ~

1 DIGITAL OUT
connect to the digital inputs of an external audio equipment. is active only when receiving input from DIGITAL IN (Coaxial or Optical). 2 WOOFER LINE OUT connect to an active subwoofer (optional).

6 MW / FM

connect to the MW loop antenna or FM antenna connect from audio equipment with digital (Coaxial or Optical) audio output. connect from the analog audio outputs of a TV or other equipment. connect to the analog audio inputs of an external recording device or amplifier. Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

7 DIGITAL IN 8 AUDIO IN (TV/AV, AUX)

3 SPEAKERS

connect to the front,center, surround and subwoofer speakers. connect from the 6 channel output of a DVD or SACD player. connect to a standard AC outlet.

9 AUDIO OUT

4 DVD/SACD IN

5 AC POWER CORD

F UNCTIONAL

OVERVIEW

Remote

control

DRAMA, ACTION,SCI-FI,CLASSIC, JAZZ, ROCK or DIGITAL.

@ SUBW +/-

to adjust the subwoofers level. REAR +/to adjust the surround speakers level. CENTER +/to adjust the center speakers level. TV +/to adjust Philipss television volume level. to set the sleep (auto-off) timer function. to select different brightness for the display screen. to optimise the dynamics of the sound output. to interrupt or resume sound reproduction. to adjust the volume level. to enter the number of a preset radio station. to switch to standby mode.

# SLEEP

( * & ^ % $ # @
% NIGHT (Dolby Digital mode only) ^ MUTE ( VOL +/) Numeric Keypad (0-9) y Notes:
The following keys only operate for a Philips DVD player. For details , please refer to a Philips DVD player instruction manual.

2 DISC - DVD MENU

Notes: The keys in the following list operate exclusively for this Receiver only. to enter or exit the disc contents menu. to enter or exit the system menu bar. to star t or interrupt disc playback. to stop playing the disc. to repeat chapter, track or disc. to repeat a specific section on a disc. to continue disc playback after an interruption. to exit or confirm the selection.
3 SYSTEM - DVD MENU 0 REPEAT ! REPEAT A-B & RESUME * OK

1 SOURCE

to select the desired source (TV/AV, DISC, TUNER or AUX). 2 Press 1 / 2 to select a preset radio station. 5 S / T in Tuner mode, to tune to a lower or higher radio frequency. 8 SURROUND to select multichannel surround (Dolby Digital, DTS or Dolby ProLogic II) or stereo sound effect.

9 SOUND

to select the various soundfield effects:CONCERT,

R EMOTE

CONTROL
NEODYMIUM RIBBON TWEETER NEODYMIUM RIBBON TWEETER

HI-FREOUENCY

NEODYMIUM RIBBON TWEETER

AC MA INS ~

IMPORTANT! Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. Never make or change any connections with the power switched on. The type plate is located at the bottom of the system.

Before connecting the speakers: Mount the speakers onto the mini speaker stands as shown in the illustration. Remove the protective cover only after the connection and installation of speakers are completed. Connect the supplied speaker system using the supplied speaker cable by matching the colors of the jacks and speaker cable. Notes: Check the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit. For optimal sound performance, use the supplied speakers. Do not connect more than one speaker to any one pair of +/- speaker jacks. Do not connect speakers with impedance lower than the speakers supplied. Please refer to the SPECIFICATION section of this manual.

Connecting the speakers

Press up (or down) the speakers jack and fully insert the stripped portion of the speaker cable into the jack, then release.
Speakers Front Left (L) Front Right (R) Center Surround (Rear) Left (L) Surround (Rear) Right (R) Passive Subwoofer
black black black black black black
white red green blue grey purple

C ONNECTIONS

Connecting antennas
MW Indoor Loop Antenna Connect the supplied MW loop antenna to the MW jack. Position the loop antenna to receive the clearest sound.
Connecting from a DVD and additional components
To listen to playback from your DVD or SACD player. Option CHANNEL-DVD/SACD IN Use the supplied audio cables to connect the 6 CHANNELDVD/SACD IN jacks to the corresponding Multichannel AUDIO OUT on your DVD or SACD player. About 6 CHANNEL-DVD/SACD IN The 6 CHANNEL-DVD/SACD IN can be used to connect from a device with a built-in multichannel decoder (e.g. Dolby, Digital,DTS, etc) and 6-channel output, i.e. a high end DVD/SACD player When using the 6 CHANNEL-DVD/SACD IN audio input, the Receiver works as a multichannel amplifier. The source reproduces surround sound and sends it to the Receiver divided into the necessar y channels. Therefore the SURROUND button has no effect since the provided signal is already multichannel. From a source which is connected to the 6 CHANNELDVD/SACD IN, audio input cannot be recorded. OR Option 2 DIGITAL IN Connect the OPTICAL or COAXIAL jack to the DIGITAL OUT jack on the DVD or SACD player. You will need to set the Receivers digital input to the jack you connected to (refer to System Setup - Digital Input)

Fix the claw to the slot

FM Indoor Antenna Connect the supplied FM antenna to the FM jack. Move the antenna in various directions until the clearest signal is received. Note: Keep the antenna as far away as possible from the TV, VCR or any radiation source to prevent unwanted noise. FM Outdoor Antenna For better FM reception, use a 75 ohm coaxial cable (not supplied) to connect the system to an outdoor FM antenna as shown.
Connecting additional components For listening to the playback from other audio/ visual devices through the Reveiver Connect the AUDIO IN (TV/AV or AUX) jacks to the AUDIO OUT jacks on the TV, VCR or other audio/visual device. AND/OR Connect the DIGITAL IN ( OPTICAL or COAXIAL) jack to the DIGITAL OUT jack on other audio/visual device. You will need to set the Receivers digital input to the jack you connected to ( refer to System Setup - Digital Input). For recording to an external recording device Connect the AUDIO OUT jacks to the AUDIO IN jacks on an analog recording device. AND/OR Connect the DIGITAL OUT jack to the DIGITAL IN jack on a digital recording device. You can only make a digital recording from digital signal received from the DIGITAL IN jack on this receiver.
Notes: If the audio format of the digital input does not match the capabilities of your Receiver, it will produce a strong distorted sound or no sound at all Always refer to the instruction manual of the connected equipment to make an optimal connection Recording from the digital output It is possible to connect a digital recorder to the digital output of the receiver. In this way, all signals coming from the digital inputs can be recorded directly on the connected audio recorder. The receiver can be used to record digital sound audio signal from DVD to CD-R. Notes: Dolby Digital, DTS or MPEG signal are not possible to record from this receiver. Digital recording is not possible when the digital source material is copy-protected. Even when other source(TV/AV, DISC 6CH, TUNER or AUX) is selected, all signals coming from the digital input(Coaxial or Optical) will be continuously recorded on the connected audio recorder.
Placing the speakers To obtain the best surround effect, place the speaker as follows.
1 Place the front left and right speakers at equal distances
from the TV and at an angle of approximately 45 degrees from the listening position.
2 Place the center speaker above or below the TV, so the
Inserting batteries into the remote control

1 Open the battery 2 Place the batteries in the
compartment with the correct polarity as indicated by + and - symbols. 3 Close the cover. CAUTION! Remove batteries if they are exhausted or will not be used for a long time. Do not use old and new or different types of batteries in combination. Batteries contain chemical substances, so they should be disposed off properly. compartment.
center channels sound is localized.
3 Place the surround speakers at normal listening ear level
facing each other or mounted on the wall.
4 Place the subwoofer on the floor near to the TV.
Notes: To avoid magnetic interference, do not position the front speakers too close to your TV. If the rear surround speakers are installed farther away from the listening position than the front and center speakers, it will weaken the surround effect. All speakers should be securely installed to prevent accidents and improve sound quality.
Switching on the system Setting up the surround sound system
You must connect all the speakers and set up the system properly in order to enjoy the Digital Cinema experience at home (refer to Connections - Connecting the speakers). You will have the feeling of being in the middle of the action because sound is coming from everywhere around you. The subwoofer can enhance the bass performance of your system dramatically. IMPORTANT! Please sit at your usual listening position in order to set up the speaker balance correctly. 10 P REPARATIONS
1 After completing all the connections, connect the AC power
cord of the Receiver to the wall outlet. The system will go into STANDBY mode.
2 Press STANDBY ON to switch on the last selected

source.

3 Rotate the SOURCE button or press TV/AV, DISC ,
TUNER or AUX on the remote control to select the input source. The selected source will be displayed.
Selecting the surround mode
IMPORTANT! For proper surround sound, make sure you have followed the Connections and Preparations procedures fully. The center and surround speakers only operate when the system is set to surround sound mode and the source material being played is recorded or broadcast in Dolby Digital, DTS, Dolby Pro Logic or Pro Logic II surround sound. Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode. However, monaural sources will not produce any sound from the surround speaker. Press SURROUND to select surround or stereo mode. The availability of the various surround sound modes depend on the number of speakers used and the incoming sound information available on the disc. The available output modes are shown below. Notes Surround sound is not available in DISC 6CH mode. Dolby Digital Surround Dolby Digital (also known as AC-3 or Dolby 5.1) and MPEG Multichannel delivers a realistic and dynamic sound similar to theater and cinema. It requires connection of all five speakers (front left/right, center, surround left/right) and subwoofer for correct Dolby Digital Surround sound reproduction. Each channel plays its own unique role in providing the right sound. Front left, center and front right join two surround speakers to reproduce high, mid and bass frequencies in five full-range channels of surround. Bass rumble, explosions and low frequency effects you feel are delivered through the subwoofer. (A large number of DVD discs have recorded in Dolby Digital Surround.) DTS Surround The DTS Surround is a cinema surround sound format that offers superior digital audio performance. DTS offers more clarity and definition especially for higher tones. The better sound quality is a result of the limited sound compression (3:1 instead of 11:1 for Dolby Digital) and the 20-bit resolution. Dolby Pro Logic Surround The Dolby Pro Logic Surround system is a specially encoded two channels analog format that will produce sound through four speaker channels (front left, center, front right, monaural surround) when a Dolby Pro Logic Decoder is used. It is also compatible with stereo systems but the user will only have two channels (Front left & Right) of sound.

Dolby Pro Logic II Surround Dolby Pro Logic II Surround creates five full bandwidth output channels from two-channel sources. This is done using an advanced, high purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations. Movie mode The movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. Music mode The Music mode is for use with any stereo music recordings, and provides a wide and deep sound space.
VSS (Virtual Surround Sound) The Pro Logic MPEG or Dolby Digital surround channel is processed by a virtualizer DSP to add surround effect from just the two front speakers. Stereo All sound is reproduced and played through the front left and right speakers. This enables standard stereo reproduction.
Selecting the digital sound effect
The digital sound effects allows you to select from various preset modes that control the frequency bands of sound to optimize certain musical styles. It greatly enhances the excitement and enjoyment of your favorite music. Press SOUND repeatedly to select the available sound effect. In Dolby Digital, DTS, Dolby Pro Logic, Pro Logic II (movie) mode, select : CONCERT, DRAMA, ACTION or SCI-FI In Stereo,VSS, Pro Logic II (music) mode, select : JAZZ, ROCK, DIGITAL or CLASSIC
Dimming the display screen
Press DIM repeatedly to select different levels of brightness for the display screen : HIGH, MID or LOW.

B ASIC F UNCTIONS

Volume Control
Changing the volume level Adjust VOLUME button (or press VOL +/-) to increase or decrease the volume level. VOL XX is displayed. VOL MAX is displayed if volume is at maximum level. Press SUBW +/- to adjust the level of the subwoofer speaker volume. SUBW XXDB is displayed. The range is from -15dB to 10dB. Press REAR +/- to adjust the level of the surround speakers volume. REAR XXDB is displayed. The range is from -15dB to 10dB. Press CENTER +/- to adjust the level of the center speakers volume. CNT XXDB is displayed. The range is from -15dB to 10dB. For PHILIPS TVs only: Press TV VOL +/- on the remote control to adjust the TVs volume level.

Adjusting the Tone

Press BASS or TREBLE on the receiver to select Bass or Treble sound feature. Adjust the VOLUME on the receiver to select the desired Bass or Treble level. BAS XXDBor TRE XXDB is displayed XX denotes the level. The range is from -10dB to 10dB. Notes The volume knob can be used to adjust Bass/ Treble level immediately after you have selected the respective Bass/ Treble sound feature. If the volume knob is not used within 5 seconds, it will become normal volume control function. When headphones are connected, the BASS and TREBLE controls will be disabled.
Notes XXdenotes the volume level. When SURROUND mode is set to Stereo or VSS mode, REAR +/- and CENTER +/- keys are void. In test tone mode, volume control is void.
To switch off the volume temporarily Press MUTE. MUTE ON is displayed. To restore the volume, press MUTE again or increase the volume level. Note When MUTE is activated ON, all sound on the rear jacks (AUDIO OUT, DIGITAL OUT) will remain on.
To listen through the headphones Connecting headphones to PHONES will switch off the speakers. The receiver switches to STEREO and surround sound will be reduced to a stereo signal which is reproducible by standard headphones. Disconnecting the headphones switches on the speakers again. If you wish to enjoy surround sound again, switch the receiver back to surround sound.

12 B ASIC F UNCTIONS

System Setup
The system setup enables you to customize the Receiver. You can adjust the following features: Center Delay If the listening position is closer to the center speaker than the front speakers, you can set the center delay time to improve the center sound effect. Options : 5ms, 3ms, 2ms, 1ms, OFF. Rear Delay If the listening position is closer to the rear surround speakers than the front speakers, you can set the rear delay time to improve the rear sound effect. Options : 15ms, 12ms, 9ms, 6ms, 3ms OFF.

To enter System Setup,

1 Press PROGRAM on the Receiver for 5 seconds to enter

the navigation menu.

2 Press S / T on the Receiver to toggle through the

functions ( TEST TONE, CENTER DELAY, REAR DELAY, DIGITAL INPUT ) and select your preferred option. Press PROGRAM again to confirm the selection. Adjust the VOLUME on the Receiver to select your preferred option. Press PROGRAM to confirm the selection. Notes If no button is pressed within 5 seconds during System Setup, it will return to normal function.
Test Tone If set to ON, the system will test the speaker settings. The test signal is generated through the left, center, right, and surround speakers. The default setting is OFF.
Digital Input Digital input selection enables you to specify the digital source to be recorded at the Digital output of the Receiver. Options: COAXIAL or OPTICAL Menu OFF Select this function to turn off the System Setup and go back to normal function.

O THERS F UNTIONS

Others Functions

Tuning to radio stations

In TUNER mode, press S or T briefly and repeatedly until the right frequency or optimum reception is obtained. Press S or T more than 1 second if you want to activate automatic search tuning. Tuning automatically stops when a station of sufficient strength has been found. Press TUNER again to select the desired band : FM or MW.

Night Mode Function

When very dynamic movie soundtracks are played at low volume, such as late at night, you can use Night Mode to apply appropriate compression so that low-level program content is not lost and high volume effects are restrained. On the remote control, press NIGHT. NIGHT ON appears briefly when activated. Press NIGHT again to deactivate. NIGHT OFF appears briefly. Notes: This function only works when Dolby Digital is selected.
Presetting radio stations
You can preset up to 40 stations.
1 Tune to your desired radio station by pressing the S or
T button on the front panel or on the remote control. and press PROGRAM to enter the program mode. PXX : XX.XX is displayed.
2 Use the numeric keypad (0-9) or 1 / 2 to select the
desired preset number (01~40).
3 Press PROGRAM to store the station.

Sleep timer setting

The sleep timer enables the system to switch to standby mode automatically at a preset time.
1 On the remote control, press SLEEP repeatedly to select a
preset time. The selections are as follows (time in minutes): OFF 15. 2 When you reach the desired length of time, stop pressing the SLEEP button. SLEEP appears.
To check the remaining length of time after sleep timer is activated: Press SLEEP. To change the preset sleep timer Press SLEEP again while the remaining sleep timer is shown. The display will show the next sleep timer options. To deactivate the sleep timer Press SLEEP repeatedly until OFF is displayed, or press STANDBY ON.

14 O THERS F UNTIONS

WARNING! Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to solve a problem by following these hints, consult your dealer or service center. Problem
No power. No sound or distorted sound from speakers

Solution

Check the connection to the AC power cord. Check the connection to the speakers. Adjust the volume. Select the source you wish to listen to. If the muting is on, press the MUTE button. Replace the speaker cables. Check the connections to the speakers. Use the CENTER +/- or REAR +/- to adjust the volume level. Check the speaker are connected correctly. Check the connections to the subwoofer. Play the bass source. The unit is too close to a TV set or other electrical appliances, relocate the unit, or turn off other appliances. The positive and negative speaker cords may have short-circuited. Turn off the power and check the speaker cords. Turn off the power and turn it on again, then reduce the volume. Check that the left and right speakers are not positioned in reverse order. Check the left and right speakers cables are not connected to the terminals in reverse order. Tune to the correct frequency. Connect the antenna. Route all connection cables away from the antenna terminals and wires. Fully extend the FM wire antenna. Position for best reception and secure to a wall. Connect an outdoor FM or MW antenna. Adjust the direction and position for best reception. Turn off the equipment causing the noise. Place the antenna farther away from the equipment causing the noise. Point the remote control at the remote sensor of the unit. Reduce the distance to the Receiver. Remove any possible obstacles. Replace the batteries with new ones. Check that the batteries are loaded correctly. Insert the mains plug into an outlet and press the main unit STANDY ON y button. Play a source with DOLBY DIGITAL 5.1 channel sound. Select a source (OPTICAL or COAXIAL) connected by digital cable correctly. Press DIM again. Check all speakers for correct polarity. Check the sources sound output setting and turn on DTS output. Play a source with DTS sound. Select a OPTICAL or COAXIAL source connected by digital cable.

No sound is heard from center or rear speakers No sound from subwoofer. Noise interfence Sound cuts off during listening to music Sound from the left and right speaker is reversed Considerable noise in radio broadcasts.
The remote control does not function.
Cant set NIGHT mode The display is dark Low bass response Cant select DTS mode

T ROUBLESHOOTING

Troubleshooting

Specifications

AMPLIFIER SECTION Output power Stereo mode (DIN).... 2 x 50 W Surround mode (1 kHz).. 50W RMS / channel Total Harmonic Distor tion. 10% at rated power (1 kHz) Frequency Response... 180Hz ~ 14 kHz / 1 dB Signal-to-Noise Ratio... >65 dB (CCIR) Input Sensitivity TV/AV.... 400mV AUX.... 400mV 6 CHANNEL-DVD/SACD... 800 mV Digital coaxial... IEC 60958 Digital optical... Toslink TUNER SECTION Tuning Range.. FM 87.MHz (50 kHz steps)... MW kHz (9 kHz steps) 26 dB Quieting Sensitivity... FM 20 dB 26 dB Quieting Sensitivity.. MW 3260 V/m Image Rejection Radio... FM 25 dB.... MW 28 dB IF Rejection Ratio... FM 60 dB.... MW 24 dB Signal-to-Noise Ratio.... FM 55 dB.... MW 35 dB MW Suppression Ratio... FM 30 dB Harmonic Distor tion... FM Mono 3%.... FM Stereo 3%..... MW 5% Frequency Response. FM 180 Hz 10 kHz / 6 dB Stereo Separation... FM 26 dB (1 kHz) Stereo Threshold... FM 23.5 dB SPEAKERS Front Speakers / Rear (surround) speakers System.... 2-way shielded System.... 2-way unshielded Impedance.... 8 Speaker drivers. 3 woofer, 2x3 ribbon tweeter Dimensions (w x h x d). 89mm x 270mm x 41mm Weight... 0.4 kg/each Center Speaker System.... 2-way shielded Impedance.... 8 Speaker drivers. 2x3 woofer,2x3 ribbon tweeter Dimensions (w x h x d).. 286 mm x 95 mm x 67 mm Weight..... 0.88 kg Subwoofer Subwoofer (not magnetically shielded design).. 6.5 Impedance.... 8 Dimensions (w x h x d). 195 mm x 462 mm x 263 mm Weight.... 5.5 kg
Specifications subject to change without prior notice.
MISCELLANEOUS Power Supply Rating UK/Europe... 220~240 V / 50 Hz Power Consumption... 160W Dimensions (w x h x d). 435 mm x 58 mm x 365 mm EcoPower Standby.... 1W Weight.... 4.2 kg
IR REMOTE CONTROL Effective Range... > 8 Meter Number of Keys.... 45 Batter y (1.5V).... AA x 2

16 S PECIFICATIONS

doc1

Ultra Slim Digital Receiver with 5 Satellite Speakers and Subwoofer
Upgrade your DVD/SACD Player
into a Home Entertainment System
Super Audio CD prepared 6 Channel Input Powerful and Deep Bass wOOx Subwoofer Wide and crystal clear sound Omni-directional ribbon tweeters Digital sound reproduction DTS, Dolby Digital 5.1, Dolby Pro Logic II and MPEG Multichannel Digital Input 6 channel full digital amplifier
standard product information
tuner FM/MW Digital tuning with 40 presets RDS station name (/22S, /25S only) sound Treble & Bass Control Digital Sound Modes (action, concert, drama, sci-fi, classic, jazz rock, digital) Matrix, Dolby Digital, Dolby Prologic II, DTS, MPEG Multichannel amplifier 6 x 50 watts RMS 3600 watts PMPO 300 watts Total Power loudspeaker boxes 4 slim dual driver satellite speakers Ribbon Tweeters 3-way center speaker wOOx subwoofer
connections Audio input: - analog : AUX, DVD 6 channel, TV-in (cinch) - digital : 1 x cinch, 1 x optical Audio output: - analog : Line out (cinch) - Subwoofer Pre-out (cinch) - digital : 1 x cinch Headphone : 3.5mm chrome plated Antenna : FM coxial, MW loop Speakers : click fit general FTD 3 step Dim mode Eco power standby mode (<1 watt) 45 keys Remote Control

remote control

physical info
EAN: (/21S) EAN: (/22S) EAN: (/25S) EAN: (/33S) EAN: (/35S) EAN: (/39S) Product Dimensions: 435mm W x 58mm H x 365mm D (receiver) 89mm W x 270mm H x 41mm D (front l/r, surround l/r) 286mm W x 95mm H x 67mm D (center speaker) 195mm W x 462mm H x 263mm D (subwoofer) Package Dimensions: 583mm W x 412mm H x 524mm D Package weight : t.b.c.
Carton contains: Digital Home Entertainment System, MultiFunction Remote Control, Operating Instructions, Warranty Information
Printed in Singapore Date Printed : Nov 2002 Specifications subject to change without notice. 2002 Koninklijke Philips Electronics N. V. All rights reserved. http://www.audio.philips.com

 

Tags

Aspire 9520 LC-30HV4U Vodafone 541 CDX45 FW780 Ftxr28EV1B9 BDP-23FD Set-TOP AR702BR-AD HTS3355 DI-300 Aspire-1690-DDR2 RL41wcps1-XTL S830D GP120CE 24040 Motorola D11 Simpson AWH65 CQ-C1001NW MX12 4 DMC-FX33 DFL-210 2333T ICF-C414 BKS 38 HTR-5930 M400R DMC-LZ8 Fostex D-80 EMP-822 F65011VI Turbo Atlanta 8300 P5RD2-VM CRC400E NV-GS27EB - 1995 PG-A20X SPA11 MPC400 NV-DS27B JBL 4318 BC278CLT Camera AE3625 46 E FVS114 ECM-TL1 LA22B450c4M CD1451B-06 IBM T23 LH-D6245A PRO 4 HBN5055AUC Magnus 42LG2000 AEU Finepix Z30 BQ-324 Review HD DVR ES-FG45 WS-28M206V WGR101 KX-TCD775 NAD C352 CDX-590 Jackhammer WPG54G Motorola V60 FS-C77 RX-F10S Quad II Titan V2 EHS6651P V-ROD DFW50 SA-608 Digimaxa6 P4S533-VM Meridian DP6850- A Cafe ZWD1472W Muvo N200 LC-20S4E 108 178 Drive MHC-DX5 DN-S3000 SR-57NXA Destruction MC R700 AM-619 CME1356 TLP 550 XR-C6210R Hobbymatic 807 UE19C4000 Dm 302 Quattrovalvole

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101