For preview purpose only

Philips Pronto Wireless Extender

RFX9400

Designed by installers, made by Philips
The wireless extender is a compact unit with four individually addressable IR outputs. It works straight out of the box, simplifying the integration of Pronto into a home network. Up to 16 extenders can be incorporated in one system.
True multiroom control No limitation in range with use of repeaters Advanced connectivity: addressable IR ports Wired and/or wireless networked control Reliable operation Unique Pronto protocol guarantees best-in-class control Smart feedback provides immediate system information Emits IR codes up to 1MHz Quick and easy set-up Out-of-the-box stand-alone mode enables instant use Compact table-top housing Smart feedback indicators for easy troubleshooting

Wireless Extender

Technical specifications

RFX9400/00

Product highlights
Product dimensions (WxDxH): 157 x 100 x 33 mm Product weight: 0.169 kg Temperature range (operation): 32F to 122F Adressable IR ports Addressable IR ports enable control of the same type of devices in a rack independently (by the same extender). Typically this is the case with multiple set-top boxes to distribute content throughout the house. Every device is asigned its own dedicated IR port. As a result the device will only receive the IR codes that are intended for this device and not for any other. Without addressable IR codes, every device will always receive all sent-out IR codes. Wired and/or wireless control Depending on the situation the extender can be used wired via ethernet for maximum reliability or wirelessly using WiFi for a flexible installation. Pronto protocol The Pronto system uses standard WiFi for wireless control but has added an additional smart protocol to guarantee a reliable and timely execution of IR codes and macros. Smart feedback The smart 2-way Pronto protocol regulates the commands that are sent from the Pronto control panel to the extenders. Each extender will acknowledge the execution and the user will be informed in case a command cannot be executed. IR code range The powerful IR-circuit is capable of transmitting virtually any IR code. Where many remote control systems are limited to 125 kHz, the Pronto extenders can send IR-frequencies to up to 1 MHz. Out-of-the-box use The extender works out of the box in stand alone mode and requires no special settings. When encryption or fixed IP is desired, the internal web browser is available via a PC or laptop. Feedback indicators Colored LED's provide information about the system, such as ethernet or WiFi connections, busy status or execution of an IR, RS232 or relais command. Errors are also displayed, helping the user to do troubleshooting if necessary.

Connectivity

Built-in wireless technology: 802.11g Encryption / security: WEP 128 bit, WEP 64 bit IR emitter connectors: 4 Network mode: DHCP, Fixed IP Ethernet

Customization

Convenience Accessories
Configuration via webserver
Error indication: LED AC/DC Adaptor: 5V DC 2A Dual IR emitter wires: 2 Printed User Guide: English, French, Spanish, German, Russian, Dutch Mini-jack IR cable: 2

System Specifications

CPU: Freescale 32 bit RISC CPU speed: 266 MHz

Infrared Capabilities

Addressable IR output: Adjustable IR output level

Dimensions

RF Capabilities
Master carton quantity: 2 Master carton weight: 2.370 kg
Adresses (ID's): 16 Frequency (GHz): 2.4 WiFi based
Date of issue 2006-10-18 Version: 1.NC: 07354 EAN: Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2006 Koninklijke Philips Electronics N.V. All Rights reserved. www.philips.com

Philips Pronto Wireless Extender

RFX9400

Designed by installers, made by Philips
The wireless extender is a compact unit with four individually addressable IR outputs. It works straight out of the box, simplifying the integration of Pronto into a home network. Up to 16 extenders can be incorporated in one system.
True multiroom control No limitation in range with use of repeaters Advanced connectivity: addressable IR ports Wired and/or wireless networked control Reliable operation Unique Pronto protocol guarantees best-in-class control Smart feedback provides immediate system information Emits IR codes up to 1MHz Quick and easy set-up Out-of-the-box stand-alone mode enables instant use Compact table-top housing Smart feedback indicators for easy troubleshooting

Wireless Extender

Specifications Connectivity
Built-in wireless technology: 802.11g IR emitter connectors: 4 Encryption / security: WEP 128 bit, WEP 64 bit Network mode: DHCP, Fixed IP Ethernet Master carton weight: 2.110 kg Product dimension (WxDxH) inch: 6.2 x 3.9 x 1.3 Temperature range (operation): 32F to 122F

RFX9400/37

Product highlights
Adressable IR ports Addressable IR ports enable control of the same type of devices in a rack independently (by the same extender). Typically this is the case with multiple set-top boxes to distribute content throughout the house. Every device is asigned its own dedicated IR port. As a result the device will only receive the IR codes that are intended for this device and not for any other. Without addressable IR codes, every device will always receive all sent-out IR codes. Wired and/or wireless control Depending on the situation the extender can be used wired via ethernet for maximum reliability or wirelessly using WiFi for a flexible installation. Pronto protocol The Pronto system uses standard WiFi for wireless control but has added an additional smart protocol to guarantee a reliable and timely execution of IR codes and macros. Smart feedback The smart 2-way Pronto protocol regulates the commands that are sent from the Pronto control panel to the extenders. Each extender will acknowledge the execution and the user will be informed in case a command cannot be executed. IR code range The powerful IR-circuit is capable of transmitting virtually any IR code. Where many remote control systems are limited to 125 kHz, the Pronto extenders can send IRfrequencies to up to 1 MHz. Out-of-the-box use The extender works out of the box in stand alone mode and requires no special settings. When encryption or fixed IP is desired, the internal web browser is available via a PC or laptop. Feedback indicators Colored LED's provide information about the system, such as ethernet or WiFi connections, busy status or execution of an IR, RS232 or relays command (RFX9600 only). Errors are also displayed, helping the user to do troubleshooting if necessary.

Customization

Configuration via webserver

Convenience Accessories

Error indication: LED AC/DC Adaptor: 5V DC 2A Printed User Guide: English, French, Spanish Dual IR emitter wires: 2 Mini-jack IR cable: 2

System Specifications

CPU: Freescale 32 bit RISC CPU speed: 266 MHz
Infrared Capabilities RF Capabilities
Addressable IR output: Adjustable IR output level Adresses (ID's): 16 Frequency (GHz): 2.4 WiFi based

Dimensions

Master carton quantity: 2
Issue date 2009-01-29 Version: 3.2.12
2009 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com
12 NC: 07357 UPC: 11126 4