SE7450_IFU_US_English.book

Page 1

Monday, May 14, 2007

6:33 PM

Register your product and get support at

www.philips.com/welcome

SE 7450
Telephone Answering Machine
Warning Use only rechargeable batteries. Charge the handset for 24 hours before use.

Page 2

Table of contents
1 1.1 Safety information Equipment Approval Information Interference Information Hearing Aid Compatibility (HAC) FCC RF Radiation Exposure Statement 4.4.2 1.2 1.5.1 1.Install your phone 15 Getting started 15 Overview of your phone 12 Your phone Whats in the box 11 11
Use more of your phone Using the Intercom

2 2.1 2.2 2.3

Important Power requirements Conformity

7 7.1 7.2 7.3 7.4 7.5

Personal settings Handset Tones Set Wallpaper Set Contrast Level Change the Handset Name
Electric, Magnetic and Electromagnetic Fields ("EMF") 7 Recycle your batteries Service Centers 8 8

2.4 2.5

Change the Display Language 19 Babysit mode Set Backlight time Set Theme Colour 20

3 3.1 3.2 3.3

Configure your SE7450 Install battery Change the Display Language Registration

9 7.7.7.8 9

8 8.1 8.2
Advanced settings Registration Unregister a handset

9 9.1 9.2

Games Play Snake game Play Tetris game

Technical data

Frequently asked questions

Page 3

Safety information
Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA.
requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
This equipment may not be used on coin service provided by the telephone company. Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company. Notice must be given to the telephone company upon permanent disconnection of your telephone from your line. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. US Number is located on the cabinet bottom. REN Number is located on the cabinet bottom.
Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and Safety information

Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, 3

Page 4

where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service.
1.2 Interference Information This equipment generates and uses radio frequency energy which may interfere with residential radio and television reception if not properly installed and used in accordance with instructions contained in this manual. Reasonable protection against such interference is 4
ensured, although there is no guarantee this will not occur in a given installation. If interference is suspected and verified by switching this equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient the radio/ television receivers antenna, relocate the equipment with respect to the receiver, plug the equipment and receiver into separate circuit outlets. The user may also wish to consult a qualified radio/ television technician for additional suggestions. This equipment has been fully tested and complies with all limits for Class B computing devices pursuant to part 15 FCC Rules and Regulations. This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Safety information

Page 5

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Privacy of Communications may not be ensured when using this product. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is receiving the interference). Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna. Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, How To Identify and Resolve Radio/TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number Safety information
004-000-00345-4 when ordering copies. Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Hearing Aid Compatibility (HAC) This telephone system meets FCC/ Industry Canada standards for Hearing Aid Compatibility.
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt clip supplied with this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

Page 7

This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls. Do not expose the phone to excessive heat caused by heating equipment or direct sunlight. Do not drop your phone or allow objects to fall on your phone. Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set. Do not use the product in places where there are explosive hazards. Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product. Active mobile phones in the vicinity may cause interference. About operating and storage temperatures: Operate in a place where temperature is always between 0 and 35 C (32 to 95 F). Store in a place where temperature is always between -20 and 45 C (-4 to 113 F). Battery life may be shortened in low temperature conditions.
networks of the countries mentioned on the packaging. You can find the Declaration of Conformity on www.p4c.philips.com.
2.2 Conformity We, Philips declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product can only be connected to the analogue telephone Important
Electric, Magnetic and Electromagnetic Fields ("EMF") Philips Royal Electronics manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals. One of Philips' leading Business Principles is to take all necessary health and safety precautions for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.

Page 8

2.4 Recycle your batteries Do not dispose your rechargeable batteries. Call the toll fee number 1-800822-8837 to get instructions on how to recycle your batteries. The RBRC Seal on the nickel metal hydride battery indicates that Philips Royal Electronics is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The RBRC program provides a convenient alternative to placing used nickel metal hydride batteries into the trash or municipal waste, which may be illegal in your area. Philipss participation in RBRC makes it easy for you to drop off the spent battery at local retailers participating in the RBRC program or at authorized Philips product service centers. Please call 1-800-8-BATTERY for information on Ni-MH battery recycling and disposal bans/restrictions in your area. Philipss involvement in this program is part of its commitment to protecting our environment and conserving natural resources. RBRC is a registered trademark of Rechargeable Battery Recycling Corporation.
2.5 Service Centers Call Center (USA and Canada): 800-233-8413 E-mail support: accessorysupport@philips.com

Page 9

2 Scroll : to your desired language

Configure your SE7450

Install battery Warning
and press mSELECT to confirm. A validation tone is emitted and the screen returns to previous menu.
Always use AAA rechargeable batteries supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types. 1 Slide out the battery cover.
Tip Once the display language is set, the option menus on the handset will switch to display in the selected language immediately. However, it will not change the language of the predefined outgoing message of your answering machine.
2 Place the batteries in the correct
polarity as indicated and replace the cover.
3.3 Registration The procedures described below are the procedures that you will find in your handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 6 handsets can be registered to one base station. The Master PIN is required before you can register or unregister handsets. Note By default, the Master PIN is 0000.

Page 13

G Talk key r In idle mode: Answer an incoming external or internal call. During a call: Activate the recall function. In other modes: Dial the selected number in the Phonebook, Redial list or Call log. H Hang-up key e In idle mode: Long press to switch off the handset, Short press to switch on the handset. During a call: Hang up a call. In other modes: Return to idle mode. I Keypad lock/Format key * In idle mode: Insert *. Long press to lock/ unlock the keypad. During a call: Insert *. In call log reviewing mode: Press repeatedly to view the alternate dialing sequences. J Ringer on/off key & Pause key # In idle mode: Insert #. Long press to turn the ringer on/off. During a call: Insert #. When predialling: Long press to insert a pause marked P. In editing mode: Long press to switch between upper and lower case. K Loudspeaker key v In idle mode: Turn on the loudspeaker and dial the number. Answer an incoming call using handsfree mode. During a call: Toggle the loudspeaker on/ off. L Call transfer key & Intercom key ic In idle mode: Initiate an internal call. During a call: Hold the line and page another handset. M Microphone

Page 14

Loudspeaker Battery door
Danger Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear.

Page 15

Getting started
5.1 Install your phone Before using the handset, the batteries have to be installed and fully charged.
5.1.1 Install battery See page 9.

Charge battery

Warning The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, an empty battery icon is displayed on the screen. If the battery level becomes exceedingly low, the phone automatically switches off and any function in progress will not be saved. 1 Place the handset on the charging cradle of the base station. A melody is emitted if the handset is placed correctly. on the display 2 The battery icon blinks during charge. becomes 3 The battery icon steady when the handset is fully charged. Note Optimal battery life is reached after 3 cycles of complete charging (over 15 hours) and discharging, allowing approximately 12 hours of talk-time and 150 hours of stand-by time.

Page 16

Use more of your phone

Using the Intercom

Warning Intercom and call transfer is only possible with handsets registered to the same base station. This feature is only available when there are at least 2 registered handsets. It allows you to make free internal calls, transfer external calls from one handset to another and use the conference option.

Intercom another handset

Note If the handset does not belong to SE740/ 745 range, this function may not be available.

1 Press c key in idle mode.
Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to All Handsets and press mSELECT to call all the handsets or scroll : to the specific handset you want to call and press mSELECT.
Transfer an external call to another handset During the call, press and hold ckey to put the external call on hold (the caller can no longer hear you). Intercom is established immediately if there are only 2 registered handsets. If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to All Handsets and press mSELECT to call all the handsets or scroll : to the specific handset you want to call and press mSELECT. The called handset rings. Press r key on the called handset to answer the internal call, where both internal callers can talk. Intercom is established. Press e key on the first handset to transfer the external call to the called handset. The external call is transferred.
Note If there is no answer from the called handset, press c key to resume the external call.
Answer an external call during intercom When there is an incoming external call during an intercom, a new call tone is emitted. Use more of your phone

Page 17

2 To answer the external call and end
the intercom, press r. Connection with the external call is established.
3 Press r key on the called handset
to answer the internal call, where both internal callers can talk. Intercom is established. Press and hold c key for 2 seconds on the first handset to start the three-party conference. CONFERENCE will be displayed on the screen once the conference call is established.
Tip To put the internal call on hold and answer the incoming external call, press ckey.
Switch between an internal and external call To switch between an internal or external call, press c key.
Tip If CONFERENCE mode is activated, a three-party conference call is automatically established if the second handset takes the line when there is already an external call in progress.

Establish a three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. 1 During the call, long press ckey to put the external call on hold (the caller can no longer hear you). Intercom is established immediately if there are only 2 registered handsets. 2 If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to All Handsets and press mSELECT to call all the handsets or scroll : to the specific handset you want to call and press mSELECT. The called handset rings. Use more of your phone 17

Page 18

Personal settings

Handset Tones

Set the Ring Volume
Danger When setting the ring volume of your phone or when the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing. There are 6 ringer volume options (Silence, Low, Medium, High, Boost and Progressive). The default level is Medium. 1 Press m MENU in idle mode, scroll : to Personal Set and press m SELECT press mSELECT to enter Handset Tones and press mSELECT again to enter Ring Volume. 2 Scroll : to your desired volume level and press mSELECT to confirm. A validation tone is emitted and the screen returns to previous menu. Note When Silence is activated, the icon be displayed on the screen. will
7.1.2 Set the Ring Melody There are 10 polyphonic ring melodies available on your handset. 1 Press m MENU in idle mode, scroll : to Personal Set and press mSELECT, press mSELECT to enter Handset Tones, scroll : to Ring Melody and press mSELECT. 2 Scroll : to your desired melody to play the melody. 3 Press mSELECT to set the ring melody. A validation tone is emitted and the screen returns to previous menu.
7.1.3 Set the Group Melody To benefit from this feature, you must subscribe to the Caller Line ldentification service. This feature enables you to select and set the melodies to be played when there is an external incoming call from a contact whose name is stored in your phonebook and belongs to a phonebook group. You can associate 1 ring melody to each group. There are three phonebook groups (Group A, B and C) available for you to organise your contacts. Each group can be assigned a unique melody. 1 Press m MENU in idle mode, scroll : to Personal Set and press m SELECT, press m SELECT to enter Handset Tones, scroll : to Group Melody and press m SELECT.

Page 19

2 Scroll : to the group for which
m SELECT. 3 Scroll : to the desired melody to
4 Press m SELECT to set the group
melody. A validation tone is emitted and the screen returns to previous menu. play the melody.
you wish to set melody and press
7.1.4 Activate/Deactivate Key Beep A single beep is emitted when a key is pressed. You can enable or disable the key beep. By default, the key beep is On. 1 Press m MENU in idle mode, scroll : to Personal Set and press m SELECT, press m SELECT to enter Handset Tones, scroll : to Key Beep and press m SELECT. 2 Scroll : to On or Off and press mSELECT to confirm. A validation tone is emitted and the screen returns to previous menu.
7.3 Set Contrast Level There are 3 contrast level options (Level 1, Level 2 or Level 3). The default contrast level is Level 2. 1 Press m MENU in idle mode, scroll : to Personal Set and press mSELECT, scroll : to Contrast and press mSELECT. 2 Scroll : to your desired contrast level (Level 1, Level 2 or Level 3) and press mSELECT to confirm. A validation tone is emitted and the screen returns to previous menu.
7.2 Set Wallpaper This feature allows you to select the wallpaper to be displayed in idle mode. There are 5 wallpapers pre-installed on your handset. The 5th wallpaper is a blank wallpaper. 1 Press m MENU in idle mode, scroll : to Personal Set and press mSELECT, scroll : to Wallpaper and press mSELECT. 2 Scroll : to your desired wallpaper and press mSELECT to confirm. A validation tone is emitted and the screen returns to previous menu. Personal settings
7.4 Change the Handset Name You can name the handset and display the handset name in idle mode. The default handset name of your handset is PHILIPS. 1 Press m MENU in idle mode, scroll : to Personal Set and press mSELECT, scroll : to Handset Name and press mSELECT. 2 Edit the handset name (maximum 14 characters) and press mOK to confirm. A validation tone is emitted and the screen returns to previous menu.
7.5 Change the Display Language See page 9.

Page 20

7.6 Babysit mode You must have at least 2 handsets registered to your base station to be able to use this feature (see page 9 "Registration"). This feature allows you to monitor, e.g. the babys room. To use the Babysit feature you need to activate it (e.g. on handset 1) and enter the number of the handset to be called (e.g. handset 2) in the event that there are noises in the monitored room. Place the handset which is in Babysit mode (e.g. handset 1) in the room to be monitored. If this handset detects a sound level greater than a certain threshold, it will automatically initiate an internal call to the selected handset (e.g. handset 2).

1 Press m MENU in idle mode,

Deactivate Babysit Mode

select Off and press mSELECT.

Set Backlight time

scroll : to Personal Set and press mSELECT, scroll : to Backlight Time and press mSELECT. 2 Scroll : to 20s, 40s or 60s and press mSELECT to confirm. A validation tone is emitted. Note By default, the backlight remains on for 20 seconds after each activation such as an incoming call, key presses, lifting the handset off the base station, etc.
7.6.1 Activate Babysit Mode Note In Babysit mode, all keys are deactivated except for mMENU key. The handset cannot perform any normal operation (making an outgoing call, receiving an incoming call, intercom another handset, paging, etc.) once this function is activated.

Set Theme Colour

scroll : to Personal Set and press mSELECT, scroll : to Theme Colour and press mSELECT. 2 Scroll : to Theme Colour 1,
Theme Colour 2 or Theme Colour 3 and press mSELECT to confirm.
A validation tone is emitted.
scroll : to Personal Set and press mSELECT, scroll : to Babysit mode and press mSELECT. Babysit mode is displayed on the screen. Scroll : through the list of handsets available and press mSELECT to select the handset to be called. Personal settings

Page 21

Advanced settings
8.1 Registration See page 9.
1 Press mMENU in idle mode,

Unregister a handset

scroll : to Advanced Set and press mSELECT, scroll : to Unregistration and press mSELECT. Enter the Master PIN when prompted and press mOK to confirm.
Note By default, the Master PIN is 0000. 3 Scroll : to select the handset number to unregister and press mSELECT. A validation tone is emitted to indicate successful unregistration and the screen shows UNREGISTERED. Note If no action is taken on the handset within 15 seconds, the unregistration procedure will be aborted and the handset returns to idle mode. To unregister a handset that does not belong to the SE740/745 range, you can only use the SE740/745 handset to unregister it.

Page 22

9.1 Play Snake game The objective of this game is to move the snake and eat as many "food blocks as possible. When the food is eaten, the snake grows in length and the score increases. Once you hit the body of the snake itself, the game is over. 1 Press mMENU in idle mode, scroll : to Games and press mSELECT, scroll : to Snake and press mSELECT. An instruction screen is displayed. Note Press 2 / 4 / 6 / 8 keys to move up / move left / move right / move down respectively. Press 5 to pause/continue with the game. Press : to select the difficulty level. 2 To start the game, press mSELECT or 5 key. 3 To exit from the game, press >.

Note Press 2 / 4 / 6 / 8 keys to rotate / move left / move right / move down respectively. 2 To start the game, press mSELECT. 3 To exit from the game, press >.
9.2 Play Tetris game You can rotate each shaped block as they fall such that they fit neatly into horizontal blocks. The more blocks you can gather within the same level, the more you will score. 1 Press mMENU in idle mode, scroll : to Games and press mSELECT, scroll : to Tetris and press mSELECT. An instruction screen is displayed. 22

Page 23

10 Technical data
Display Progressive LCD backlight General telephone features Dual mode caller name & number identification 10 polyphonic ringer melodies Battery 2 x HR AAA NiMh 600 mAh batteries Power Consumption Power consumption at idle mode: around 800mW Temperature range Operation: Between 0 and 35 C (32 to 95 F). Storage: Between -20 and 45 C (-4 to 113 F). Relative humidity Operation: Up to 95% at 40C Storage: Up to 95% at 40C

Page 24

11 Frequently asked questions
www.philips.com/support In this chapter, you will find the most frequently asked questions and answers about your phone. Connection The handset does not switch on! Charge the batteries: Put the handset on the base station to charge. After a few moments, the phone will switch on. The handset does not charge! Check charger connections. icon is not blinking during charge! Battery is full: There is no need to charge the battery. Bad battery contact: Adjust the handset slightly. Dirty contact: Clean the batteries contact with a dry cloth. Wrong batteries installed: Use only AAA rechargeable batteries supplied with your unit There could be risk of battery leakage if you use alkaline batteries or other battery types. Communication is lost during a call! Charge the battery Move closer to the base station. The phone is "Out of range"! Move closer to the base station. Set-up Searching. is displayed on handset and icon is blinking! Move closer to the base station. Make sure that your base station is on. Reset your unit and restart handset registration (see Registration on page 9). Warning batt. is displayed on handset! Use only AAA rechargeable batteries supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types.

Sound Handset does not ring! Check that the Ring Volume is not set to icon is not Silence, and make sure displayed on the screen (see Set the Ring Volume on page 18).

Page 25

Caller cannot hear me at all! Microphone may be muted: During a call, press mUNMUTE. Theres no dialling tone! No power: Check the connections. Batteries are empty: Charge the batteries. Move closer to the base station. Wrong line cable used: Use the line cable provided. Line adaptor is required: Connect the line adaptor to the line cord. Caller cannot hear me clearly! Move closer to the base station. Move the base station at least one metre away from any electronic appliances. Frequent noise interference on my radio or television! Move the base station as far away as possible from the electrical appliances.
handset, unregister an existing handset. Remove and replace the handset batteries. Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset. Make sure that you have entered the correct PIN code. If you have not changed it, by default it is 0000. Callers number is not displayed! Service is not activated: Check your subscription with your network operator. Poor audio quality and the antenna icon is blinking! The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond the operation range, the antenna icon will blink. My handset keeps going into idle mode! If there are no key presses for 30 seconds, the handset will automatically return to idle mode. It will also return to idle mode automatically when you place the handset back on the base station. Phonebook entry cannot be stored and MEMORY FULL is displayed! Delete an entry to free memory before saving your contact again.
Product behaviour Keypad does not work! Unlock your keypad: Long press * in idle mode. The handset warms up when making a long call! This is a normal behavior. The handset consumes energy while calling. The handset cannot be registered to the base station! Maximum number of handsets has been reached. To register a new Frequently asked questions

Page 26

The copy from my mobile phone SIM card to SE7450 is not complete! Only phonebook entries from your mobile phone SIM card will be transferred. If you have phonebook entries on your mobile phone memory, transfer them to your mobile phone SIM card before transferring to your SE7450. The Master PIN code is wrong! The default master PIN is 0000. If it has been changed before, and you cannot remember the new one, reset the handset to revert to the default master PIN code.

Page 27

12 Index A
Accessories 11 Answer an external call 16

Switch handset on/off 16

Backlight time 20

Unregister 21

Charge battery 15 Conference call 17 Connect base station 15

Display icons 14

Handset Name 19 Handset Tones 18
Install battery 9 Install phone 15 Intercom 16

Key Tone 19

Language 9
Overview of your phone 12
Recycle your batteries 8 Registration 9 Ring Melody 18 Ring Volume 18

Page 28

Page 29
Copyright 2007 Koninklijke Philips Electronics N.V. All rights reserved. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Specifications are subject to change without notice. Document order number: 37421 (EN/ES/FR) Printed in China.

Philips Digital cordless phone handset

SE7450B

Enhanced High Def Voice

Ultimate call clarity

Conversations have never been so life-like and voices so natural than with the outstanding sound clarity of the SE7 series. The sparkling color screen reflects the purity of the voice enhancement for the pleasure of your eyes and your ears
Outstanding sound quality Enhanced speakerphone for real-life handsfree conversations Unique acoustic design for superb call clarity Enhanced High Def Voice All the features of DECT Virtually interference free Up to 100% greater battery life Ultra private calls
Digital cordless phone handset

SE7450B/37

Specifications

Picture/Display

Backlight Backlight color: White Main Display Resolution: 128x128 pixel Main Display Technology: CSTN

Highlights

Network Features
Antenna: Integrated on base, Integrated on handset Compatible: GAP Dialing: Tone, Pulse
Virtually interference free
Thanks to an advanced digital technology, calls are undisturbed by interferences from other devices.

Operator Requirements

Name and Caller ID Caller ID on call waiting

Enhanced speakerphone

Handset ringers: Polyphonic Volume Control: Volume Control up/down Alarms: Alarm Clock Battery charging indication Call Management: Call Waiting, Caller ID, Microphone mute Ease of Use: Graphical User Interface, Keypad Lock, Menu Control Function: Babysit function, Baby Call Multi base capability: 4 Multi handset capability: Up to 5 handsets Personalisation/Customization: Wallpaper Signal strength indication VIP group with own melody: Yes (3 groups) Backlit keypad: Yes (White) Speakerphone-Talk handsfree

Convenience

Memory Capacity
Call log entries: 50 Phonebook: 250
Combine a high quality speaker, sophisticated signal processing, a real acoustic chamber and full duplex handsfree and you 'll get the most natural reproduction of a conversation Both sides can speak and be heard at the same time, like in a face-to-face conversation.

Dimensions

Unique acoustic design
Base dimensions: 74 x 72.5 x 78 mm Handset dimensions: 162.4 x 46.5 x 29.8 mm
Our unique acoustic design provides a high-quality, rich communication experience. A best-in-class system designed for superb call clarity.
Battery capacity: 750 mAh Battery type: AAA NiMH Kind of Battery: Rechargeable Mains power: AC 120V - 60Hz Number of batteries: 2 per handset Standby time: 150 hours Talk time: Up to 12 hours

Enhanced Hi Def Voice

Enjoy high quality conversation, with a level of clarity rarely heard before. Thanks to a high-quality speaker, sophisticated technology and to a real acoustic chamber, the audio spectrum reaches far beyond what's normally heard on a telephone.
Issue date 2009-11-06 Version: 3.0.7
2009 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com
12 NC: 28555 UPC: 12928 3