HD7811, HD7810

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed including the following: Read all instructions before using the appliance. 1. not touch hot surfaces. Use handles or knobs. Care must Do be taken to prevent burns which can occur from touching hot parts or spilling hot liquids. 2. protect against fire, electrical shock and injury to persons, do To not immerse cord, plug, or appliance in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning appliance. 5. not operate this appliance with a damaged cord or plug, or Do after the appliance malfunctions or has been damaged in any manner. Return the Coffee Machine to the nearest Authorized Norelco Service Location for examination, repair or adjustment. 6. Use this appliance only for its intended purpose as described in this manual. Do not use accessory attachments not recommended by Philips Electronics North America Corporation as they may result in fire, electric shock or injury to persons. 7. not use outdoors. Do 8. not let cord hang over edge of table or counter or touch Do hot surfaces. Operate on a flat, stable surface away from edge of counter to prevent accidental tipping. 9. not place Coffee Machine on or near a hot gas or electric Do burner, or in a microwave or heated oven. 10. his appliance is intended for household use ONLY; it is not for T commercial or industrial use. 11. ny service to the Coffee Machine should be performed by the A nearest Authorized Norelco Service Location. 12. o disconnect Coffee Machine, press power button (I) to T OFF, then remove plug from electrical outlet. Remove plug by gripping plug body and pulling it from the outlet. Never yank or twist cord to unplug. 13. o not use Coffee Machine if lid has a cracked, loose, weakened D or damaged lever. 14. his appliance does not work at temperatures below T 50F/10C.
15. o not use this appliance at altitudes higher than D 6800 ft. / 2200 m above sea level. 16. lush the Coffee Machine with fresh water before using it for F the first time (See Preparing the machine for use). This will cause the boiler to fill with water; which is essential for the machine to work properly. 17. o prevent scalds and/or property damage, always make sure T Coffee Machine lid is securely in place and properly locked before you start using the machine and during brew cycle. Do not force when opening or closing lid. 18. o not open lid until Coffee Machine has finished brew cycle. D Hot steam or hot water trapped under lid cover could burn your fingers. 19. arning:To reduce the risk of fire or electric shock, W do not remove the bottom cover. No user serviceable parts are inside. Return the Coffee Machine to the nearest Authorized Norelco Service Location for examination, repair or adjustment.

SAVE THESE INSTRUCTIONS

SPECIAL INSTRUCTIONS
This Coffee Machine has a short cord to reduce the hazards of becoming entangled in or tripping over a longer cord. An extension cord may be used if the rating is equal to or greater than the rating of the Coffee Machine. Use an extension cord rated 13 amperes or greater. Care must be taken to arrange extension cord so that it does not hang over the edge of counter top or table top, where it can be pulled on by children or tripped over unintentionally. Operating the Coffee Machine and another appliance at the same time from the same electrical circuit could cause an electrical overload, which would blow the fuse or trip the circuit breaker.
SPECIAL POLARIZED PLUG INSTRUCTIONS
This Philips Coffee Machine has a polarized plug (one blade is wider than the other) as an added safety feature. To reduce the risk of electric shock: - Plug will fit into polarized outlet only one way. - f plug does not properly fit into outlet at first, reverse it. I - If plug still does not fit, contact a qualified electrician.
DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE IN ANY WAY.
- o avoid risk of personal injury or damage to property as a result T of overflow, be sure that the cup or mug is centered under the coffee outflow unit during the brew cycle. - rewed coffee and coffee pods are very hot. Handle with care to B avoid scalding. - f coffee outflow unit overflows or fails to drain into cup/mug I during brewing cycle, do not open lid or handle coffee outflow unit or coffee pod holder(s). Unplug Coffee Machine and wait for contents to cool before handling. - o not remove any part of Coffee Machine or cup/mug during D the brew cycle as scalding could occur. - se only fresh, cool water in this appliance. Do not put any other U liquids in this appliance except as instructed in the Descaling section. Do not refill the water reservoir with hot water or coffee. - O NOT attempt to move an appliance containing hot liquids or D during the brewing process. Allow appliance to cool completely before moving. - eep appliance at least 4 inches away from walls or other objects K while operating. Do not place any object on top of coffee machine while operating. - It is very important that you descale your SENSEO\\ machine every 3

WARNING:

months to prevent malfunctioning. For the correct procedure, see chapter Descaling. - Never interrupt the descaling process! - Always use the correct descaling mixture, i.e. 50 grams citric acid to 1 litre tap water.
Never turn your SENSEO\\ machine on its side. Always keep it in upright position, also during transport.
PLEASE READ AND SAVE THIS INSTRUCTION BOOKLET
TABLE OF CONTENTS Features Introduction Preparing the machine for use Brewing coffee Cleaning Descaling Storage Assistance Trouble shooting guide Warranty 16 18
General description (fig. 1)
A Water reservoir B Lid of water reservoir C 1-cup pod holder D 2-cup/1-mug pod holder E Coffee outflow unit F Cover of coffee outlow unit G Drip tray H Cup tray I Metal distribution disk K Outflow valve L Indicator lightfor use')

Introduction

With the SENSEO coffee machine by Philips you can enjoy a perfect cup of coffee - topped with a rich frothy coffee layer - whenever you feel like it. Each cup is freshly brewed, so you're always sure of that pure, smooth taste. The patented Senseo brewing system from Philips in combination with the special Senseo coffee pods makes sure you get only the very best in flavor and aroma from freshly roasted coffee. To optimize the taste of the coffee, you should keep the following aspects in mind:

Fresh water

Use fresh water every day. Before using for the first time or if you have not used the machine for some time, rinse the water reservoir, fill it with fresh water and flush the machine before you begin brewing coffee (see Preparing the machine for use).

Senseo coffee pods

In order to avoid damage, use only Senseo coffee pods that have been specifically developed for your Senseo coffee machine for a pure, smooth taste. The Senseo coffee pods will stay fresh longer if you close the package by means of the keep-fresh seal after use or if you store them in a storage container.

A clean machine

Scale build-up may cause overheating of the heating element and may make the safety cut-out operate prematurely, switching off before the water boils. Scale may also reduce the working life of the machine and may lengthen the brewing time. Clean and descale your Philips Senseo coffee machine regularly (see 'Cleaning' and 'Descaling'). Remove used coffee pods after brewing. If a used pod has been left in the coffee machine and you have not used the machine for some time, flush the machine before you use it again (see 'Preparing the machine for use').

Preparing the machine for use
Use this Senseo coffee machine for its intended household use as described in this manual. You cannot brew coffee if you have not flushed the Senseo coffee machine first! The flushing cycle causes the boiler to be filled with water. After this the coffee machine is ready for use. Flush the machine in the following way:
Remove the water reservoir.
Fill the water reservoir with cold water up to the MAX indication and put it back into the machine.
Release the lid by moving the lever upwards.

4Open the lid.

Put either the 1- or 2-pod holder in the machine without using any coffee pod(s).

CK CLI

6 Close the lid and lock the lever. Make sure the lever is properly locked by pushing it down until it snaps home with a click. B Never flush the machine with the lid open! The lid must be properly locked.
Put the plug into a 120V AC electrical outlet. Put a bowl (with a capacity of at least 1.5 liters/1.6 qt.) under the coffee outflow unit to collect the water.
Press on/off button I. Then press both the q and qq/w buttons briefly at the same time.
The machine will fill itself with water from the water reservoir. This will take some time and you will probably not notice that this is happening. After a while, the machine will start flushing and it will switch itself off after the flushing cycle. During the flushing cycle the machine produces more noise than during a regular brewing cycle.
Before brewing coffee for the first time, clean the coffee outflow unit and the pod holders with hot water and some dish soap or in a dishwasher. Clean the water reservoir thoroughly in hot water, if necessary with some dish soap.
Now your Philips Senseo coffee machine is ready for use!

Brewing coffee

Fill the water reservoir with cold water up to the MAX indication and put it back into the machine. Never pour milk, coffee, hot water or carbonated water into the water reservoir. - q MIN: minimum amount of water required to brew one 4.0 oz. cup of Senseo coffee. - qq/w MIN: minimum amount of water required to brew one 8.0 oz. mug or two 4.0 oz. cups of Senseo coffee. - HD7810: A full reservoir allows you to make up to five 4.0 oz. cups Senseo coffee. - HD7811: a full reservoir allows you to make up to ten 4.0 oz. cups Senseo coffee. Press on/off button I. The indicator light blinks while the water is heating up. Heating up takes approx. 90 seconds. The coffee machine is ready for use when the indicator light is lit continuously.

5 First place the appropriate coffee pod holder in the machine. Make sure the coffee pod holder is clean and the sieve in the center is not clogged (i.e. with loose coffee grounds).
If you want to make one 4.0 oz. cup of Senseo coffee, use the 1-cup pod holder.
If you want to make one 8.0 oz. mug or two 4.0 oz. cups of Senseo coffee, use 2 coffee pods in combination with the deeper 2-pod holder and the qq/w button. Place the Senseo coffee pod(s) properly in the center of the pod holder, with the flat Senseo side up and the rounded side facing down. B Use Senseo coffee pods that have been specifically developed for your Senseo coffee machine for a pure and smooth taste. 6
Place 1 Senseo coffee pod in the 1-pod holder or
place 2 Senseo coffee pods in the 2-pod holder. Make sure the coffee in the pod(s) is evenly distributed and press the pod(s) lightly into the pod holder. B Never use torn pods or normal ground coffee, as this could cause the machine to become blocked.
7 Close the lid and lock the lever. Always check if the lid is properly locked. The lever must be pushed down until it snaps home with a click. Never start brewing coffee with the lid open! The lid must be properly closed.
Place one cup, two cups or one mug under the outflow openings. If you are using cups, make sure they have a capacity of app. 5.0 oz. If you are using a mug, make sure the mug has a capacity of app. 10.0 oz. Do not use cups or mugs that are too large, as they will cause the coffee to get cold more quickly. If using one cup or one mug, be sure to position the cup or mug right under the coffee outflow unit with its two openings Press the button indicating the number of cups of Senseo coffee you want to brew. - q for one 4.0 oz. cup. - qq/w for two 4.0 oz. cups or one 8.0 oz. mug. The Senseo coffee machine starts brewing. - The machine automatically supplies the optimal amount of water. - You can interrupt the brewing process at any time by pressing the on/off button I. If you switch the machine back on after having interrupted the brewing process, the machine will NOT complete the interrupted brewing cycle. 9

10 Remove and discard the coffee pod(s) after use by lifting the coffee pod holder out of the machine and emptying it. Coffee pod(s) should not be used more than one time. Be careful when doing this, for there may still be some hot water/coffee on the coffee pod(s) or steam may escape. If the coffee pod sticks to the metal distribution disk inside the lid, let the pod cool down first before carefully removing it, making sure not to touch the hot metal disk. By rinsing the coffee pod holders and the coffee outflow unit regularly, you will make sure that the coffee always tastes best. Senseo coffee will taste best if you stir it before drinking it. If you intend to make another cup of Senseo coffee later, just leave the coffee machine switched on. The machine will automatically switch itself off after app. one hour.

Cleaning

Never immerse the Senseo coffee machine in water or any other liquid. Never clean the machine by flushing it with the lid open. 3 Always turn machine off and unplug the machine before cleaning it. Clean the outside of the machine with a moist cloth. Remove the coffee outflow unit.
You can disassemble the coffee outflow unit for more thorough cleaning!
Clean the coffee outflow unit, the pod holders and the drip tray in hot water, if necessary with some dish soap, or in the dishwasher.
Hold the cup tray in your hand while cleaning it with hot water, if necessary with some dish soap. The cup tray can also be cleaned in the dishwasher. To clean the cup tray, remove it from the machine, as it might prove sharp when handled incorrectly. Always handle it carefully!
Clean the coffee pod holders in hot water, if necessary with some dishwashing soap or in the dishwasher. Check if the sieve in the center of the pod holders is clogged. If the sieve is clogged, unclog it by holding the pod holder under a running faucet. If necessary, you can use a soft brush to unclog the sieve.
Clean the water reservoir in hot water, if necessary with some dish soap or in the dishwasher. B The splash guard on the water reservoir can be removed to allow thorough cleaning of the inside. B If you are using a soft brush or mesh covered sponge, be careful not to damage the valve in the bottom of the water reservoir. 8 Rinse the parts with fresh water after cleaning and put them back into the machine.

9 Clean the metal distribution disk with a moist cloth. Be careful when you do this; make sure that the rubber sealing ring does not get stuck under the edge of the metal distribution disk. If it does, the coffee machine will start leaking!

Descaling

When to descale Descale the SENSEO\ coffee machine frequently! Preferably descale 4 to 6 times a year, but at least once every 3 months. Descaling takes about 1 hour. Do not interrupt the descaling process. Why to descale Scale builds up inside the appliance during use. It is essential to descale the SENSEO\ coffee machine at least every 3 months. Your reasons to descale: - It prolongs the life of your SENSEO\ coffee machine - It ensures maximum cup volume - It ensures maximum coffee temperature
- The machine produces less sound during brewing - It prevents malfunctioning If the descaling procedure is not performed correctly, scale residue remains behind in the machine. This causes scale to build up more quickly and may cause permanent and irreparable damage to the machine. Use the correct descaling agent Only citric acid-based descalers are suitable for descaling the SENSEO\ machine. This type of descaler descales the appliance without damaging it. For the correct amount, see under Descaling procedure below. Each descaling mixture can be used only once. After use, the descaling mixture is no longer active. We advise you to use the special SENSEO\ Descaler (HD7006). Read the instructions on the package of the descaling agent. Never use a descaling agent based on mineral acids such as sulphuric acid, hydrochloric acid, sulphamic acid and acetic acid (e.g. vinegar). These descaling agents may damage your SENSEO\ coffee machine. Descaling procedure 1Mix 50 grams of citric acid with 1 litre of water in a measuring jug. Stir until the powder is completely dissolved.
2 Fill the water reservoir up to the MAX indication with the des-
caler mixture. Then put the water reservoir back into the coffee machine.
Note: Not all SENSEO\ machine types have a water reservoir with a capacity of 1 litre. If you have a SENSEO\ machine with a smaller water reservoir, repeat steps 2 to 6 with the remainder of the mixture without filling the water reservoir up to the MAX indication.
3 Press the on/off button 3.
The machine is ready for use when the indicator light burns continuously.
4 Place the 1-cup pod holder q with a used coffee pod in it in the
coffee machine. Close the lid and make sure it is properly locked.
Note: Always put a used coffee pod in the pod holder when you descale the machine.This pod serves as a filter to prevent the sieve or hole in the pod holder from getting clogged with scale residue.
5 Put a bowl with a capacity of at least 1.6 qt /1.5 liters under the
spout to collect the descaling mixture.

6 Press the 2-cup button qq/w and let the machine operate.
Repeat this until the water reservoir is empty. Never interrupt the descaling process!
7 Repeat steps 1 to 6. Replace the used pod with another used pod
to filter out the scale residue.
Note:To descale properly, you have to use 2 litres of descaling mixture. Never descale the SENSEO\ coffee machine with the lid open. Make sure the lid is properly locked.
8 Rinse the water reservoir with tap water. Fill the water reservoir
up to the MAX indication with tap water and repeat steps 3 to 6.
Note: Do not refill the water reservoir with used hot water or the used descaling mixture.
9 Fill the water reservoir with fresh tap water up to the MAX
indication again and repeat steps 3 to 6 once more.
Note: Always rinse the machine by letting it empty two full water reservoirs.
10 Remove the used pad and clean the pod holder after descaling to
prevent the sieve or hole in the centre from getting clogged.

Storage

If the coffee machine has already been used and therefore has been flushed with water, it may only be used and stored in a frost-free place to prevent it from becoming damaged. Empty water resorvoir before storing.

Assistance

For assistance call toll free: 1-866-4 SENSEO (1-866-473-6736) or visit our website: www.senseo.com Authorized Norelco Service Location information is available 24 hours a day, 7 days a week.

Troubleshooting guide

I f you experience a problem with your Philips Senseo coffee machine, you may find the solution in the table below. If the table does not provide the solution to your problem or if you have a question, see the chapter 'Assistance'.
Problem Solution The indicator light continues You have not yet flushed the coffee machine (see chapter Preparing the to blink slowly. machine for use). You have used the SENSEO\ coffee machine at an altitude higher than 6800 ft. / 2200 m above sea level. This has caused the water in the machine to start boiling before it has reached the required temperature, which prevents the machine from functioning properly. Switch the machine off and no longer use it at altitudes higher than 6800 ft. / 2200 m above sea level. The SENSEO\ coffee machine does not produce coffee when used for the first time. You have not yet flushed the coffee machine. When you use the machine for the first time, you have to flush it before you start brewing coffee (see chapter Preparing the machine for use).

The indicator light continues Make sure that: to blink rapidly. the water reservoir has been properly placed; there is enough water in the water reservoir (i.e. above the q MIN level if you want to brew 1 cup); the ambient temperature is not lower than 10C/50F. If it is, the machine will not function properly. Water leaks from the coffee Make sure that: machine. the lid is properly closed (the lever must be properly locked); the water reservoir has not been filled beyond the MAX level; the sieve in the centre of the pod holder is not clogged. If it is, unclog the sieve by holding the pod holder under a running tap. If necessary, you can use a washing-up brush or a pin to unclog the sieve; the coffee pod has been put properly in the centre of the pod holder; the sealing ring has not got stuck under the edge of the water distribution disc (see figure 1 at the beginning of these instructions for use). the water drops on the worktop are not the result of placing or removing the water reservoir or removing used coffee pods. you do not remove the water reservoir when the coffee machine is heating up. This may cause water that normally ends up in the water reservoirto leak out of the machine. In all other cases, contact the Philips Consumer Care Centre in your country.
Problem The coffee spout cannot be taken out of the machine. The lid cannot be opened.
Solution The coffee spout can only be taken out after the coffee collector has been removed. A vacuum may have temporarily formed under the lid. Switch the machine off. Pull the lever up as far as it will go and wait 24 hours before opening the lid. You may need to use quite some force. Make sure that the sieve in the centre of the pod holder is not clogged. If it is, unclog the sieve by holding the pod holder under a running tap. If necessary, you can use a washing-up brush or a pin to unclog the sieve. Make sure you do not move the SENSEO\ machine. Moving the machine, placing it outdoors or in a cool or cold environment does not accelerate the unlocking of the lid. Do NOT put the SENSEO\ machine in the fridge or freezer, as this does not accelerate the unlocking of the lid. If problems continue to occur, contact the Philips Consumer Care Centre in your country.
The coffee machine produces less coffee than before. The Senseo coffee machine brews only a small quantity of coffee or no coffee at all when it is used for the first time. The lid cannot be closed properly.

Perhaps the sieve in the centre of the pod holder is clogged. If this is the case, unclog the sieve by rinsing the pod holder under a running tap. Use a washing-up brush to clean the sieve, if necessary. Descale the machine (see chapter Descaling). You have not flushed the machine properly before first use. As a result, the boiler is not or not completely filled. Flush the machine properly (see chapter Preparing the machine for use) before you brew another cup of coffee. Check if a used coffee pod is sticking to the water distribution disc. If this is the case, remove the used pod. Check if you used the correct pod holder. Use 2 pods in combination with the deeper 2-cup pod holder qq. Use 1 pod in combination with the 1-cup pod holder q.
The machine has been stored in a room that was not frost-free. The SENSEO\ coffee is not strong enough.
Contact the Philips Consumer Care Centre in your country. Make sure that: you have used the correct number of pods and have pressed the right button. Use 1 pod in combination with the 1-cup pod holder q and the 1-cup button q. Use 2 pods in combination with the 2-cup pod holder qq and the 2-cup button qq/w; the coffee pod(s) have been placed properly in the centre of the pod holder, to prevent water from escaping along the edge of the pod(s). When you are using two coffee pods on top of each other, make sure that the convex sides of both pods are pointing downwards and press the pods lightly into the pod holder; you have not used the same pod twice by accident;

Problem

Solution the coffee in the pod is evenly distributed; If you prefer a more robust flavour, SENSEO\ coffee pods with a stronger blend are available.
The SENSEO\ coffee is too If you prefer a milder flavour, SENSEO\ coffee pods with a milder blend strong. are available. The coffee is not hot enough. Do not use cups that are too large, as they will cause the coffee to get cold more quickly. When using cups, make sure they have a capacity of 150 ml/app. 5.0 oz. When using a mug, make sure it has a capacity of 280 ml/10.0 oz. When using a mug, always use 2 pods in combination with the 2-pod holder and the qq/w button. Your SENSEO\ machine has a technical malfunction and has drained all water for safety reasons. The machine is blocked and does not function anymore. For assistance, please visit our website www.senseo.com or take the machine to a Philips service centre.

Water and steam have leaked from the bottom of the appliance in a fast way.

FULL TWO YEAR WARRANTY

Philips Electronics North America Corporation warrants each new Philips Product, model HD7810 and HD7811 (except cord, coffee pods and accessories) against defects in materials or workmanship for a period of two years from the date of purchase, and agrees to repair or replace any defective product without charge. IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.* Use of unauthorized replacement parts will void this warranty. PHILIPS ELECTRONICS NORTH AMERICA CORPORATION WILL NOT PAY FOR WARRANTY SERVICE PERFORMED BY A NON-AUTHORIZED REPAIR SERVICE AND WILL NOT REIMBURSE THE CONSUMER FOR DAMAGE RESULTING FROM WARRANTY SERVICE PERFORMED BY A NONAUTHORIZED REPAIR SERVICE. NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. In order to obtain warranty service, simply take or ship the product postage prepaid to the nearest Authorized Norelco Service Location. It is suggested that for your protection you return shipments of product by insured mail, insurance prepaid. Damage occurring during shipment is not covered by this warranty. NOTE: o other warranty, written or oral, is authorized by Philips Electronics North N America Corporation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion and limitations may not apply to you. * Read enclosed instructions carefully. Manufactured for: Philips Consumer Lifestyle A Division of Philips Electronics North America Corporation 1600 Summer Street Stamford, CT 06912-0015 COFFEE PODS PACKAGED IN BELGIUM. T his symbol on the products nameplate means it is listed by Underwriters Laboratories, Inc. PHILIPS and Philips Shield are Registered Trademarks of Koninklijke Philips Electronics N.V. Senseo is a Trademark of Koninklijke Philips Electronics N.V. when used for coffee makers. Senseo is a Trademark of Sara Lee/DE N.V. when used for coffee pods. 2004 Philips Electronics North America Corporation. All Rights Reserved.

SENSEO Coffee pod system

Original

HD7811/64

The best of your coffee, at a touch of a button

with SENSEO Original

The Philips SENSEO coffee machine with the specially developed Pilo SENSEO coffee pods always gives you a fresh and tasty brewed coffee with a delicious crema layer, in less than a minute.
Sensational coffee Delicious SENSEO coffee crema layer Unique SENSEO coffee brewing system for optimal taste Range of specially developed Pilo SENSEO coffee pods Ultimate convenience Automatic shut-off for less energy consumption One button operation for total control A cup of coffee in 30 seconds Design Iconic curved SENSEO design

Coffee pod system

Highlights
A cup of coffee in 30 seconds Range of Pilo coffee pods

Specifications

Design specifications
Materials: Plastic Color(s): Raven black

Country of origin

Country of origin: Poland

Technical specifications

One cup of SENSEO coffee in approx. 30 seconds, two cups or one mug in less than a minute.

One button operation

The new Pilo SENSEO pods bring the fully aroma, body and taste of your freshly brewed Pilo, in a very fast & convenient way. With SENSEO you brew your favorite coffee, in the same volume and intensity, always fresh with a delicious cream layer. It's all for you to enjoy a unique experience with every cup. Pilo SENSEO: intense taste and aroma of the strong coffee of Brazil, also available in breakfast version. Pilo SENSEO Sabor de Vero: smoother and aromatic, also available in breakfast version. Pilo SENSEO Intenso: more bodied coffee, with remarkable taste and aroma.
Auto-off: 60 minute(s) Black coffee brew volume: 60/120 ml Frequency: 50 Hz / 60 Hz Power: 1450 W Spout height: 117 mm Voltage: 127 V Cord length: 1 m Water tank capacity: 750 ml

Dimensions

Dimensions (WxHxD): 210 mm x 330 mm x 310 mm Packaging dimensions (WxHxD): 229 mm x 375 mm x 395 mm

Dimensions & weight

Product weight: 1.75 kg weight with packaging: 2.32 kg
Unique SENSEO brewing system
Brewing your perfect cup of coffee has never been so simple. You can easily select the number of cups by choosing between the 1 cup or 2 cup buttons of your SENSEO coffee machine.
Delicious SENSEO crema layer
Unique SENSEO coffee brewing system from Philips and Pilo. Every cup is freshly brewed and prepared with the ultimate balance between coffee and water - a guarantee for a smooth full taste and delicious aroma.
Delicious SENSEO coffee crema layer as proof of Pilo SENSEO premium coffee quality
Issue date 2011-02-09 Version: 5.1.1
2011 Koninklijke Philips Electronics N.V. All Rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. www.philips.com