GEBRUIKSAANWIJZING

Thank you for buying this telephone system. Your telephone is equipped with convenient features such as full-handsfree conversation, 24-non-volatile memories and a 10-digit LCD-display which indicates: the numbers entered during dialling the buttons entered during programming such as: the call timer icon the store icon the ring indicator icon the mute icon the handsfree operation icon In the package you will find the following: one base unit one handset one coiled cord one telephone line cord one user manual

Description of Features

MMMM4 4

MMMM8 8

MMMM12 12

skip 300

Volledig handvrije werking 24 geheugens
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Display Memory buttons Store button Recall button Mute button Redial/Pause button Microphone Dialling keypad Shift button Volume adjust buttons Speaker button
Installing Your Telephone

Groot LCD-scherm met

telefoontimer

Progressief rinkelen

Connect the telephone line cord
Connect the handset coiled cord
Setting the Dialling Mode
Set your dialling mode to either Tone or Pulse depending on which dialling system is used. To test if the dialling mode works, dial a digit. If dialling tone is still heard, you have to change to the other dialling mode.
The dial tone should stop Press 1 for Pulse mode or 2 for the Tone mode A long beep and the dial tone will be heard
Setting the TBR (Flash) Time
Set your TBR (Flash) time according to the specification of your exchange, if in doubt, contact your network operator.
You have 3 TBR time choices: 100 ms, 270 ms or 600 ms
The dial tone should stop

100 ms

270 ms

600 ms

A long beep and the dial tone will be heard
Setting the Ringer Volume
Adjust your ringer volume by doing the following.
The dial tone The phone will should stop start ringing The phone will stop ringing

The Memory Feature

Your phone can store up to 24 telephone numbers. 12 are stored under memory locations marked M1.M12, while the remaining 12 under 1. 12

MMMMMMMMMMMM1

Setting the Ringer Melody
Adjust your ringer melody by doing the following. Press. To store telephone numbers into memory locations M1. M12:
M1 M2 M5 M6 M7 M8 M9 M10 M11 M12
The dial tone The phone will should stop start ringing
The phone will stop ringing
Dial the telephone number
Select memory location button. A long beep and the dial tone will be heard
To store telephone numbers into memory locations

Setting the Recall Mode

Set your recall mode to either Time Break Recall(TBR) mode or Earth Leg Recall(ELR) mode. If in doubt, contact your network operator.
The dial tone should stop TBR mode

ELR mode

A long beep and the dial tone will be heard.
Note: A telephone number may not consist of more than 32 digits including and , otherwise, it cannot be stored under pauses, and the buttons one memory location. Some telephones might need to wait for a second dialling tone in order to dial the stored memory; in this case, insert a pause wherever necessary , if the pause is not long enough, extend the pause duration by pressing by pressing two to three times.

Erasing Memories

M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M11 M12
The Last Number Redial Feature
The last number dialled will be stored automatically until future replacement. To redial the number:
lift the handset or press Speaker, press Redial/Pause.
For memories stored in M1.M12, press M1.M12.
For memories stored in 1. 12 , press Shif1 1. 12. A long beep and the dial tone will be heard.
Note: The telephone number can only be redialled if it consists of not more than 32 digits. Redial/Pause is the first button pressed after you take the line. If other buttons are pressed first, the previous telephone number will be replaced.

Receiving Incoming Calls

The ring indicator icon will blink when the phone rings. Pick up the handset or press to receive the call. To adjust the handset or speaker volume during conversation, press repeatedly or.

Chain Dialling

In order to dial 2 or more telephone numbers consecutively, press the next memory button immediately after the first telephone number has been dialled.

Making Calls

Make a call either by manual or memory dialling. The buttons entered can be seen through the display. Manual dialling
Lift the handset or press Speaker.

Mixed Mode Dialling

If the telephone is set to pulse dialling mode, pressing will send the next digits in tone mode. The tone mode makes it possible to access public services such as telephone banking. After hanging up, the telephone will automatically reset back to pulse dialling mode.

Dial the telephone number.

Handsfree Conversation

During conversation, you can switch from handset to handsfree conversation, i.e. using the speaker microphone.
Press and hold the Speaker Replace the handset Release the Speaker Press [+] or [-] to adjust to the desirable volume. To terminate the conversation.

Memory dialling

To dial memories stored in M1.M12, press M1.M12.
Note: To switch from handsfree to handset conversation, lift the hand set.

11 121

The Listening-In Feature
This feature allows handset conversation and listening-in at the same time. During handset conversation, press. To end only listening-in, press. To end the entire call, replace the handset.
To dial memories stored in press

1. 12 , 12.

The Mute Feature
This feature is used during phone conversation in order for you to talk in private to somebody else without the person on the other line hearing. Press Press to turn the microphone off. to resume conversation.

The call Timer Feature

When receiving an incoming call, the conversation time will start automatically. When making a call, the conversation time will be shown on the display 10 seconds after the telephone number is entered. ->The and the conversation time will be shown on the display. Terminating the call will stop the call timer automatically. ->The total conversation time will remain displayed for around 5 seconds.
, and [R] (Flash) Buttons
These buttons can be used for special public or private exchange service functions. Please consult your network operator for further details concerning the network services provided.
Philips Consumer Help Desk Unit 4, Elmwood, Chineham Business Park, Crockford Lane, Basingstoke, Hampshier RG24 BWG, United Kingdom. Phone :Fax :01256 707335