Philips VR330 Manual
Philips VR330, size: 954 KB
Here you can find all about Philips VR330 like manual and other informations. For example: .
Philips VR330 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Philips VR330 please write about it to help other people. [ Report abuse or wrong photo | Share your Philips VR330 photo ]
User reviews and opinions
|jmsanchez||6:56am on Saturday, May 22nd, 2010|
|poor did not like the item,because when i recieved item the video player was not working.there for i had to send the item back which cost me money.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
2 Head Mono Video Recorder
Turbo Drive 75s Rewind Time Showview / VideoPlus + NTSC Playback Follow TV Direct Record
Reception - Installation Tuner: Hyperband, UHF,VHF Tuning - Presets: PLL, CH entry, 99 presets TV Related Functions: Direct Record, Follow TV Time/Date Download: PDC (Time/Date),Text (Time) Sound Systems: Mono User Interface Picture Improvement System: Digital Studio Picture Control Audio Recording Level: Automatic Special Features: Auto Standby, Channel Name Display On Tape Standard Additional Playback Standard: NTSC Playback on PAL TV Remote Control Unit Remote Control - Type Number: RT220/111 Remote Control - Codes: VCR1,TV Commands Connectors Rear EXT1: Black, Euro CVBS in/out Terrestrial Antenna In/Out: 75 Ohms (IEC type) Tape Deck Number of Video / FM Audio / Flying Erase Heads: 2 / 0 / 0 Play: +1, Repeat Still Features: Standard Index Related Functions: Next/Prev. index search Head Cleaning: Automatic, Dirty Head Warning Tape Length Recognition: Automatic Tape Counter: Linear Relative (h.m.s),Tape Position Indicator,Time Left (h.m) Winding / Rewinding Time (E180): 75 sec. Programming Number of Events: 8/year General Voltage: 198 - 264 V Frequency: 50Hz Backup Presets: 1yr Backup Clock - Calendar - Timer Event: 1mn Power Consumption SB in Watts: <4 Set Size - W x D x H in mm: 360 x 230 x 93 Packaging - W x D x H in mm: 426 x 290 x 181 Equipement Supplied: Aerial Cable, Batteries for RC
Digital Studio Picture Control Digital Studio Picture Control keeps checking the quality of your videotapes and reproduces the best possible picture performance. Philips Digital Studio Picture Control optimises the playback quality. It measures the characteristics of the tape, adapts the resolution and reduces the picture noise. New Turbo Drive deck The new Turbo Drive deck offers: Speed 75-second ultra-fast rewind speed. Reliability To guarantee an optimum playback reliability, a Dirty Head Warning system will automatically detect when the use of a cleaning tape is necessary and display a message.This comes in addition to the Automatic Head Cleaning which has equipped the PhilipsTurbo Drive decks over the past years. Intelligence The Tape Position Indicator, in wind and re-wind situations, displays the accurate position of the tape on the TV screen and indicates progress by means of a moving/blinking arrow. At any time, you can follow the tape movement on the TV screen.
TV Systems Off Air OSD Menu Languages Record Speed Record Speed Selection Record / Playback Standard EXT2 Record Control & Transmitter Identification Programming System Record Link
VR330/58 PAL B/G, PAL D/K, SECAM B/G, SECAM D/K Czech, English, Hungarian, Polish, Russian Cyrillic Long Play, Standard Play Per Menu MESECAM, PAL PDC, VPS Showview, Manual Timer, One Touch Recording
VR330/39 PAL B/G, SECAM L/L1, SECAM B/G Dutch, French, German Standard Play MESECAM, PAL, SECAM Black, Euro CVBS in, Euro Decoder PDC, VPS Showview, Manual Timer, One Touch Recording SCART 2
VR330/07 PAL I English Long Play, Standard Play Per Menu PAL PDC VideoPlus +, Manual Timer, One Touch Recording
VR330/02 PAL B/G Dutch, English, French, German, Italian, Spanish, Swedish Long Play, Standard Play Per Menu PAL PDC, VPS Showview, Manual Timer, One Touch Recording
Subject to modification without notice
Show View and Video+ are registered Trademarks of Gemstar Development Cooperation.
VR330/07.qx3 02.2.6 10:10 AM Page 3
Table of Contents
1. Connecting the video recorder.4 Important for the United Kingdom.4 Preparing the remote control for operation.4 Connecting your video recorder to the TV set.4 Connecting with a scart cable.4 Connecting without a scart cable.5 2. Important notes for operation.6 Navigation in the screen menu.6 The symbols on your video recorder display.6 3. Installing your video recorder.7 Preparation for use.7 Manual TV channel search.7 Sorting TV channels automatically (Follow TV).8 Automatic Tuning.9 Sorting and clearing TV channels manually.9 Setting the clock.10 Setting the RF out channel.10 4. Playback.11 Playing cassettes.11 Playing back NTSC cassettes.11 Displaying current tape position.11 Searching for a tape position with picture(scanning).12 Still picture / slow motion.12 Searching for tape position without picture (forward wind and rewind).12 Automatic search for a tape position (index search).12 Manual Tracking.12 5. Manual recording. General information. Recording without automatic switch-off. Recording with automatic switch-off (OTR One-Touch-Recording). Preventing accidental erasing of cassettes Lining up recordings (assemble cut). Selecting the recording speed (SP or LP) 'Direct Record'. Switching 'Direct Record' on or off. 6. Programming a recording (TIMER). General information. Programming a recording (with 'VIDEO Plus+'). Problems and solutions for programmed recordings. Programming a recording (without VIDEO Plus+). Problems and solutions for programmed recordings. How to check, or delete a programmed recording (TIMER). How to change a programmed recording(TIMER). 7. Other functions. Switching the status display off or on Continuous playback. Blue Background on or off. Automatic switch-off.18.104.22.168.22.214.171.124.14
8.Before you call an engineer.20
Operating instructions Remote control and batteries Aerial cable
The Department of Trade and industry operates a Radio lnvestigation Service to help TV licence holders improve reception of BBC and ITC programmes where these are being spoilt by interference. If your dealer cannot help, ask at a Main Post Office for the booklet 'How to lmprove Television and Radio Reception'.
VR330/07.qx3 02.2.6 10:10 AM Page 1
VR330/07.qx3 02.2.6 10:10 AM Page 2
Thank you for buying a Philips video recorder. This video recorder is one of the most sophisticated and easy-to-use video recorders (VCR) on the market. Please take the time to read this operating manual before using your video recorder. It contains important information and notes regarding operation. The video recorder should not be turned on immediately after transportation from a cold to a hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transporting the device. The video recorder needs this time in order to become acclimatised to its new environment (temperature, air humidity, etc.). These operating instructions have been printed on non-polluting paper. Deposit old batteries at the appropriate collection points. Please make use of the facilities available in your country for disposing of the packaging of the video recorder in a way that helps to protect the environment. This electronic device contains many materials that can be recycled. Please enquire about the possibilities for recycling your old device.
This video recorder is used for the recording and playback of VHS videocassettes. Cassettes with the VHS-C label (VHS cassettes for camcorders) may only be used with a suitable adapter. We hope you enjoy your new video recorder.
VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation. The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation. So that you can identify your machine for service questions or in the event of theft, enter the serial number here. The serial number (PROD.NO.) is printed on the type plate fixed at the back of the device. MODEL NO. : VR330/07 PROD. NO..
Important notes regarding operation
" Do not remove the top cover as there is
a risk of an electrical shock! The video recorder does not contain any " components that can be repaired by the customer. Please leave all maintenance work for qualified personnel. As soon as the video recorder is connected
Danger: High voltage!
This product complies with the requirements of Directive 73/23/EEC +89/336/EEC +93/68 EEC.
" to the power supply, there are some components that are in constant operation. To switch off the video recorder completely you must disconnect it from the power supply. Make sure that air can circulate freely
Voltage: 230-240V/50Hz Power consumption : 20W Power consumption (Standby): less than 4W (PWR. in the display switched off) Rewind time: approx. 100 seconds (cassette E180) Dimensions in cm/ft (WxDxH): 36.0x22.6x9.2 / 1.2x0.3x0.9 Number of video heads : 2 Recording/playback time: 3 hours (SP) (cassette E-180) 6 hours (LP) (cassette E-180)
! through the ventilation slots on the video
recorder. Do not place the device on an unsteady base. Make sure that no objects or liquids enter
! the video recorder. Do not place vases or
the like on the video recorder. If liquid is spilt into it, immediately disconnect the video recorder from the power supply and call After-sales Service for advice. Do not place any combustible objects on
! the device (candles, etc.).
Make sure that children do not place any
! foreign objects within the openings or ventilation slots.
VR330/07.qx3 02.2.6 10:10 AM Page 4
1. Connecting the video recorder
Important for the United Kingdom
This apparatus is fitted with an approved moulded 10 Amp plug. To change a fuse in this type of plug proceed as follows: 1.Remove fuse cover and fuse. 1. 2.Fix new fuse which should be a 2. BS1362 3A,ASTA or BSI approved type. 3.Refit the fuse cover. 3. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 3A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 3A. The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket alsewhere. How to connect a plug: The wires in the mains lead are coloured in accordance with the following code: BLUE- 'NEUTRAL' ('N') BROWN- 'LIVE' ('L') 4.The BLUE wire must be connected to the terminal 4. which is marked with the letter 'N' or coloured BLACK. 5.The BROWN wire must be connected to the termi5. nal which is marked with the letter 'L' or coloured RED. 6.Do not connect either wires to the earth terminai in 6. the plug which is marked with the letter 'E' or by the safety earth symbol or coloured green or green-and-yellow. Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead-not imply over the two wires.
6. If the connection was properly made and
your TV was automatically switched to the programme number for the scart socket, you will see the following picture:
PLEASE CONNECT AERIAL OR CABLE TO THE VCR THEN. PUSH P+ KEY OR. FOR PLAY ONLY - PUSH PLAY
Then, read the paragraph 'Preparation for use' in the chapter 'Installing your video recorder'. My screen is empty * Many TV sets are switched to the programme number for the scart socket by way of a control signal sent through the scart cable. * If the TV set does not automatically switch to the scart socket programme number, manually change to the corresponding programme number on your TV set (see your TV's operating instructions). I do not see the picture. * Check the cable connections. * Repeat the channel search on your TV.
7. Save this programme number setting on your
TV set for video recorder operation. You can find more details in chapter 'Preparation for use'. Programme number for video recorder operation You have now saved a programme number for use by your video recorder as you would a regular TV channel. This programme number must now be used in future for video recorder playback ('video recorder' TV channel).
Connecting without a scart cable
Have the following cables ready: an aerial cable. 1. Switch off your TV set. 2. Remove the aerial cable plug from the aerial input socket of the TV set. Insert it into the AERIAL at the back of the video recorder.
AERIAL RF OUT
VR330/07.qx3 02.2.6 10:10 AM Page 6
2. Important notes for operation
Switching on You can switch on the video recorder with the STANDBY/ON y button. Automatic switch-off If the video recorder is not used for several minutes, it switches itself off automatically. This function can be deactivated (e.g. if you want to use the video recorder as a TV receiver). For more information, please read the section 'Automatic switch-off' in chapter 'Other functions'. Time in the display If you have switched the video recorder off with STANDBY/ON y , the time will show in the display, e.g. '18:00'. If the clock has not been set, ' --:-- ' will appear. Power consumption The video recorder should always be connected to the mains so as not to affect the use of the TV or programmed recordings. Your video recorder uses less than 4W. Power outage/no power Channel information remains saved for up to 10 year, the time and timer information is saved for up to 1 minute.
Navigation in the screen menu
You can check/change many functions and settings of your video recorder via the on-screen menu. The individual functions are selected, via the remote control as follows:
Call up the menu: with MENU.
To select: with K B L C.To enter or change your selection: with the number buttons 0.9 or with K B L C. To save or confirm: with B 1. To cancel: with CLEAR. To end: with STATUS/EXIT.
SELECT K L CHOOSE B TIMER RECORD SET UP VCR SET UP TUNER SET UP INITIAL SET UP END=EXIT
The symbols on your video recorder display
These symbols can light up on your video recorder display:
When you keep your video recorder on. When you have put a cassette in the video recorder. Display of programme number of the TV channel / time / RF channel.
When you record. When you have programmed a recording.
VR330/07.qx3 02.2.6 10:10 AM Page 7
3. Installing your video recorder
Preparation for use
This chapter shows you how to prepare the video recorder for use. The video recorder automatically seeks out and stores all available TV channels. 'Aim' correctly In the following sections, you require the remote control for the first time. When using, always aim the front of the remote control at the video recorder and not at the TV. Connecting additional devices After you have connected additional devices (satellite receiver, etc.) through the aerial cable, switch them on. The automatic channel search will recognise them and save them. 1.Press P+. 1. The automatic channel search starts.
5. When all information is correct, save by
pressing STATUS/EXIT. The preparation for use is now complete.
Manual TV channel search
In some cases it can occur that all TV channels are not found and saved during the first installation. In this case, the missing TV channels must be searched for and stored manually. 1. Switch on the TV set. If required, select the programme number for the video recorder. 2. Press MENU. The main menu will appear. 3. Use K B L C to select 'TUNER SET UP'. Then press B 1. 4. Use K B L C to select 'MANUAL TUNING'. Then press B 1. 5. Select 'PROG.' with K B L C. Then press B1.
PROG. CHANNEL SKIP
The video recorder does not find any TV channels during the search * Select channel 1 on the TV. Can you see the saved TV channel on the TV? If not, check the cable connection of the aerial (aerial socket), video recorder, TV. * The video recorder searches the entire frequency range in order to find and save the largest possible number of TV channels.
SELECT K L CHOOSE B END=EXIT
K B L C or 0.9 , select the desired programme number that you want to use for the TV channel, e.g. 'P01'. Then press B 1.
SELECT K L CHOOSE B AUTO TUNING MANUAL TUNING FOLLOW TV MOVE
TV, e.g. '2'.
10. Confirm with B 1. 11. Repeat steps 8 to 10 until you have assigned 12. To end, press
a programme number to all TV channels. STATUS/EXIT.
5. 'P:01' will appear in the video recorder display.
6. Select programme number '1' on the TV. 7. Confirm with B 1 on the video recorder
remote control. The video recorder compares the TV channels on the TV and the video recorder. If the video recorder finds the same TV channel as on the TV, then it stores it at 'P01'.
VR330/07.qx3 02.2.6 10:10 AM Page 9
During installation, all available TV channels are searched for and saved. If the channel assignments of your cable or satellite TV provider change or if you are re-installing the video recorder, e.g. after moving house, you can start this procedure again. This will replace the TV channels already saved with the new ones. 1. Switch on the TV. If required, select the programme number for the video recorder. 2. Press MENU. The main menu will appear. 3. Select 'TUNER SET UP' with K B L C and confirm with B 1. 4. Select 'AUTO TUNING' with K B L C and confirm with B 1.
Sorting and clearing TV channels manually
After you have performed the automatic channel search you may not agree with the sequence in which the individual TV channels have been allocated to the programme positions (programme numbers) of the video recorder. You can use this function to individually sort the TV channels already saved or to delete unwanted TV channels or those with poor reception. The clock resets automatically If you save a TV channel that transmits TXT/PDC on programme number P01, date and time will constantly be updated. As a result, time changes, i.e. daylight savings time, will be set automatically.
1. Switch on the TV set. If required, select the
programme number for the video recorder.
2. Press MENU. The main menu will appear. 3. Select 'TUNER SET UP' with K B L C and
4. Select 'MOVE' with 5. The automatic TV channel search starts. This
allows the video recorder to save all available TV channels. This procedure may take several minutes. 6. When the TV channel search is complete, 'COMPLETED' will briefly appear on the TV screen. with
, and confirm
MOVE P01: 02 P06: P02: 03 P07: P03: 05 P08: P04: 10 P09: P05: 74 P10: SELECT K L CHOOSE END=EXIT 130 B
K B L C , select the saved TV channel that you want to change. 6. Confirm with B 1. 7. Move the selected channel with K B L C to the programme number you want to assign. 8. Confirm with B 1. 9. To assign other TV channels to a programme number, repeat steps 5 to 8. 10. Confirm the assignment of the TV channel with MOVE menu. 11. To exit the MOVE menu, press STATUS/EXIT
VR330/07.qx3 02.2.6 10:10 AM Page 10
Setting the clock
If the display shows an incorrect time or ' --:-- ', the time and date must be reset manually. If a TV channel that transmits TXT/PDC (teletext/PDC) is stored under programme number 'P01', time/date will automatically be taken from the TXT/PDC information. (SMART CLOCK) 1. Switch on the TV. If required, select the programme number for the video recorder. 2. Press MENU. The main menu will appear.
Setting the RF out channel
In some reception locations it is possible that a TV channel will be sent on the same or similar frequency as the video recorder. Result: As soon as the video recorder is switched on, the reception quality for this or several other TV channels will decrease. The following steps will show you how to change the pre-set 'transmission' (RF out channel) frequency on the video recorder. What is RF out channel? This electronic component in the video recorder allows the device to transmit audio and video signals via the aerial cable. These signals can be received on a TV set just like TV channels. This frequency or channel indicates the channel on which the audio or video signal is transmitted.
3. Select 'INITIAL SET UP' with
confirm with B 1. 4. Select 'CLOCK' with with B 1.
1. Switch on the TV. If required, select the programme number for the video recorder.
2. Press MENU. The main menu will appear. 3. Select 'INITIAL SET UP' with K B L C and
5. Check the time in 'TIME'. If required, please
change the time with 0.9. 6. Check 'DAY', 'MONTH' and 'YEAR' in the same way. 7. Choose SMART CLOCK ON or OFF with B1. 8. To end, press STATUS/EXIT. Time/date is displayed incorrectly despite manual setting * With Smart Clock, time/date is taken from the TV channel saved on 'P01'. If you wish to switch this automatic time correction off, select 'OFF' for Smart Clock. You can reactivate this function at anytime by selecting 'ON' for Smart Clock.
4. Select 'RF OUT' with
SELECT K L CHOOSE B RF OUT CH 35
5. Press 6. Press
L C or 0.9 to select the channel which is not broadcasted between channel 22 and channel 69 in your area. 7. Press B 1. When you want to receive TV signals directly from the VHF/UHF TV aerial, select the channel 22 first. Then, press L C and confirm with B 1. 8. To end, press STATUS/EXIT.
VR330/07.qx3 02.2.6 10:10 AM Page 11
You can use this video recorder to play back recorded VHS videocassettes. You can operate the video recorder using the remote control or the buttons on the front of the video recorder. Your video recorder can only record and play standard VHS cassettes. 1. Put a cassette into the cassette slot. The cassette is inserted automatically. ' ' will appear on the display. DIGITAL STUDIO PICTURE CONTROL Philips has developed a system which produces the best possible playback quality. For old and often-used video cassettes, this system reduces interference. For new or high quality cassettes, it emphasises the details. Picture/ sound quality is poor When playing rental videos or older, poorer quality cassettes, it may not be possible to completely filter out picture and sound interference. This is not a fault in your machine. Read the section 'Manual tracking'.
Playing back NTSC cassettes
Cassettes that have been recorded in the NTSC standard (for example, American cassettes) can be played back using this video recorder. However, this only works on PAL-television sets that are suitable for a picture frequency of 60Hz.
Displaying current tape position
The following information is displayed on the screen: e.g.: 0:02:45 shows the counter in hours, minutes and seconds. SP/LP: will show the recorded speed of your cassette 'REM 0:06': will show the actual amount of playing/recording time left on the tape in hours and minutes. When you play an NTSC cassette, the video recorder will show 'REM -:--'. How can I set the counter to '0:00:00'? You can set the counter to '0:00:00' with CLEAR. When you put a cassette in the video recorder, the counter will automatically reset to '0:00:00'. The counter does not move This occurs when there are no recordings on a portion of a tape. This is not a fault in your video recorder. The screen shows '-0:01:20' If you rewind a cassette from the tape position '0:00:00', the counter will show for instance, '-0:01:20' (the cassette was rewound to 1 minute and 20 seconds before '0:00:00'). '-:--' is displayed in the 'REM' counter This counter will automatically recognise the length of the tape. In addition, when you put in a cassette the video recorder must first calculate the time played. Therefore, '-:--' appears first and only after the tape has been running for a few seconds, the correct playing time will be shown.
2. Press K B to view the tape. 3. To stop the playback, press L C or
A C/A on the video recorder. A 4. To eject the cassette, press C/A when the video recorder stops the playback.
Automatic switch-off of special functions Many functions (e.g. pause, still picture) switch themselves off automatically after a short time in order to protect the cassette and to save energy. Do I need to change the playback speed when playing back LP recordings? During playback, the correct speed will automatically be selected. For more information, please read the section 'Selecting the recording speed (SP or LP)' in the chapter 'Manual recording'.
VR330/07.qx3 02.2.6 10:10 AM Page 12
Searching for a tape position with picture (scanning)
1. While a cassette is playing, press
Automatic search for a tape position (index search)
Every time a tape is recorded an index marking is written on the tape. These marked positions can be found again quickly and easily later. 1. To search for the previous marking, press INDEX 3 and then s 0. 2. For the next marking, press INDEX 3 and then B 1. 3. As soon as the video recorder finds this marking, it automatically switches to playback.
(reverse) or B 1 (forward) one or more times. 2. Press K B to resume playback.
3. To start recording, press RECORD/OTR I. 4. Stop recording with L C.
Recording with automatic switch-off (OTR One-Touch-Recording)
1. Insert a cassette. 2. Use P+ P- to select the programme number you want to record.
3. Press RECORD/OTR I. 4. Each time you press RECORD/OTR I you will
add 30 minutes to the recording time.
VR330/07.qx3 02.2.6 10:10 AM Page 14
Selecting the recording speed (SP or LP)
LP allows to double the recording duration on tape (for example six hours instead of three hours on an E180 cassette).
With Direct Record, you can record the right TV channel in seconds even if your video recorder is switched off. If the recording is started manually, the video recorder uses the current TV channel set on the TV. You will find more information on how to switch 'Direct Record' on or off in the next section. Make sure that your video recorder socket (AV1/TV) and the TV are connected by a scart cable.
2. Press MENU. The main menu will appear. 3. Select 'RECORD SETUP' using K B L C
and confirm with
1. On the TV, select the programme number you
want make the recording from. RECORD/OTR I with the video recorder switched off. 3. Stop recording with L C.
4. Select 'RECORD SPEED' using K B L C. 5. Select the required recording speed with
SELECT K L CHOOSE B RECORD SPEED DIRECT RECORD [SP] [OFF]
How does Direct Record work?
The video recorder compares the TV channel selected on the TV set with its stored TV channels via the scart cable. If the same TV channel is found, it switches the video recorder to the corresponding programme number and starts recording. Please do not change the TV channel on the TV set during the search so as not to affect the process.
6. To end, press
SP'/'LP' 'SP': StandardPlay (normal recording speed) offers the usual first-class picture quality. 'LP': LongPlay (half recording speed, double recording time). 6 hours can be recorded on a 3hour cassette (E180) with a somewhat reduced picture quality.
Switching 'Direct Record' on or off
2. Press MENU. The main menu will appear. 3. Select 'RECORD SET UP' with K B L C
4. In 'DIRECT RECORD', select 'OFF' (Direct
Record off) or 'ON' (Direct Record on) with
5. To end, press
6. Switch off with
VR330/07.qx3 02.2.6 10:10 AM Page 15
6. Programming a recording (TIMER)
Use a TIMER programming to automatically start and stop a recording at a later time or date. The video recorder will switch to the right programme number and begin recording at the correct time. With this video recorder, you can pre-programme up to eight recordings within a period of one year. To make a programmed recording, your video recorder needs to know: * the date you want to make the recording * the programme number of the TV channel * the start and stop time of the recording * VPS or PDC on or off This information is saved in a 'TIMER block What is 'VPS/PDC'? 'VPS' (Video Programming System)/ 'PDC' (Programme Delivery Control) are used to control the start and duration of TV channel recordings. If a TV programme starts earlier or ends later than scheduled, the video recorder will turn on and off at the correct time. What do I need to know about 'VPS/PDC'? Usually the VPS or PDC time is the same than the start time. But if your TV guide shows a VPS or PDC time which is different from the programmes scheduled start time, e.g. 20.10 (VPS/PDC 20.14), you must enter the VPS/PDC time exact to the minute. If you want a start time different from the VPS/PDC time, you must switch VPS/PDC off. If you make a mistake, you can clear your input with CLEAR.
SET=VIDEO PLUS+ CORRECT=CLEAR END=EXIT
4. Press SV/V+. 5. Select ONCE, DAILY, or WEEKLY recording
. Then press
Plus Code ONCE DAILY WEEKLY
Selecting once/daily/weekly recordings Using K B L C , select from the following options: 'ONCE': Recording once 'DAILY': Repeated daily recordings (Monday to Friday) 'WEEKLY.': Repeated weekly recordings (every week on the same day) The following message appears on the screen: Prog. No. '- -' * The programme number of the TV channel has not yet been assigned to the ShowView number. Using the number buttons 0.9 on the remote control, select the corresponding programme number (name) of the TV channel. The following message appears on the screen:'ERROR' * The entered ShowView number is incorrect. Correct your input or end with STATUS/EXIT. * Check the time/date (see chapter 'Installing your video', section 'Setting the time and date'). * A daily recording was entered for the wrong day. Daily programming can only be used for recordings to be made from Monday to Friday. The following message appears on the screen:'TIMER NOT COMPLETED' * The channel is wrong.
5. Select TIMER block with
Selecting once/daily/weekly recordings Use K B L C to select from the following options: 'ONCE': Recording once 'DAILY': Repeated daily recordings from Monday to Friday 'WEEKLY.': Repeated weekly recordings (every week on the same day) 6.With 0.9 buttons you can enter 'START' 6. (start time) , 'STOP' (end time) , 'PROG.' (programme number) VPS/PDC and 'DATE'. Programme numbers of the ' AV/IN ' and scart socket You can also programme recordings from external sources via scart socket AV/IN. 7.When all inputs are correct, press 7. STATUS/EXIT. The programming information is stored in a TIMER block. 8.Insert a cassette with an intact security tab 8. (unprotected). 9.Switch off with STANDBY/ON y. 9. The programmed recording will only function when the video recorder is switched off with STANDBY/ON y.
VR330/07.qx3 02.2.6 10:10 AM Page 17
The video recorder does not react While a programmed recording is being made, you cannot operate your video recorder manually. If you want to cancel the programmed A recording, press C/A. The end of the tape was reached during recording. Switch off the video recorder with STANDBY/ON y. A programmed recording (timer) will only function if the video recorder is switched off. 'TURN OFF VCR FOR TIMER RECORDING' appears on the screen * The video recorder was switched on several minutes before the start of a programmed recording. ' ' will flash in the video recorder display * No cassette was inserted. Insert a cassette and switch off the video recorder using STANDBY/ON y. Cassette is ejected during recording * The end of the tape was reached during recording. The 'PROTECTED CASSETTE CANNOT RECORD' error message appears briefly in the screen then the cassette is ejected * A cassette was inserted with the security tab removed. Undo the erase protection (chapter 'Manual Recording', section 'Preventing accidental erasing of cassettes') or insert a different cassette.
How to check, or delete a programmed recording (TIMER)
2. Press MENU. The main menu will appear. 3. Select 'TIMER' with K B L C. Then press
4. Select 'TIMER LIST' with
SELECT K L CHOOSE B
ONCE DAILY WEEKLY TIMER LIST
5. Select timer block with B 1. 6. To cancel the recording, press CLEAR. 7. To end, press STATUS/EXIT. 8. Switch off with with STANDBY/ON y.
How to change a programmed recording (TIMER)
4. Select ONCE, DAILY, or WEEKLY recording
5. Select a TIMER block with
. (The flashing number indicates an empty TIMER block.)
ONCE TIMER - -
SELECT TIMER NUMBER END=EXIT
CLEAR to delete information and input correct information with 0.9. 7. To end, press STATUS/EXIT. 8. Switch off with STANDBY/ON y.
VR330/07.qx3 02.2.6 10:10 AM Page 18
7. Other functions
Switching the status display off or on
Along with the on screen menu, the status display also displays information on the current operating status (counter, playback, recording, TV channel, etc.) on the TV screen. You can switch off the information about the operating status so that the status display is not recorded when copying videocassettes.
This function can be used to play a cassette over and over again. When the end of the cassette is reached, the video recorder will rewind and start from the beginning again. This function is activated or deactivated as follows. 1. Press MENU. The main menu will appear. 2. Select line 'VCR SET UP' using K B L C and confirm with B 1. 3. Select 'REPEAT PLAY' using K B L C.
SELECT K L CHOOSE B REPEAT PLAY [ON] STATUS DISPLAY [ON] BLUE BACKGROUND[ON] AUTO STANDBY [OFF]
1. Switch on the TV set. If required, select the 2. Press
programme number for the video recorder. MENU. The main menu will appear.
3. Select 'VCR SET UP' with
SELECT K L CHOOSE B END=EXIT REPEAT PLAY [ON] STATUS DISPLAY [ON] BLUE BACKGROUND[ON] AUTO STANDBY [OFF]
4. Select 'STATUS DISPLAY' with K B 5. Select 'ON' or 'OFF' with B 1.
4. Select function 'ON' with B 1. If you select 'OFF', continuous playback will be switched off. 5. To end, press STATUS/EXIT. 6. Insert a cassette. 7. Start the continuous playback with K B.
Which settings can I choose? 'ON': Shows the status display for a few seconds only. 'OFF': Switches off the status display.
VR330/07.qx3 02.2.6 10:10 AM Page 19
Blue Background on or off
1. Switch on the TV. If required, select the programme number for the video recorder. 2. Press MENU. The main menu will appear. 3. Select 'VCR SET UP' using K B L C and confrim with B 1. 4. Select 'BLUE BACKGROUND' using K B L C and confirm with B 1.
SELECT K L CHOOSE B REPEAT PLAY [ON] STATUS DISPLAY [ON] BLUE BACKGROUND [ON] AUTO STANDBY [OFF]
If you haven't used the video recorder for a few minutes in certain modes (e.g.: STOP), it will switch to standby automatically. You can cancel this function to use the video recorder as a television receiver. 1. Switch on the TV. If required, select the programme number for the video recorder. 2. Press MENU. The main menu will appear. 3. Select 'VCR SET UP' using K B L C and confrim with B 1. 4. Select 'AUTO STANDBY' using K B L C.
SELECT K L CHOOSE B REPEAT PLAY [ON] STATUS DISPLAY [ON] BLUE BACKGROUND [ON] AUTO STANDBY [ON]
5. Select 'OFF' (no blue background) or 'ON'
(blue background on) with B 1. If you select 'OFF', the menu display will disappear. 6. To end, press STATUS/EXIT.
5. Select 'OFF' (no automatic switch-off) or 'ON'
(automatic switch-off) with
VR330/07.qx3 02.2.6 10:10 AM Page 20
8. Before you call an engineer
If, contrary to expectation, you have any problems using this video recorder, it may be caused by the following reasons. Your video recorder does not respond to any button being pressed: * There is no power supply: check the power supply. * A programmed recording is currently being made: if desired, cancel the programmed recording. Please see the section 'How to check or delete a programmed recording' in chapter 'Programming a recording' * There is a technical problem: disconnect from the mains power supply for 60 seconds, then connect again. If this doesn't help, you could reset your video recorder to the default factory settings. Resetting devices to default factory settings * Attention: All the information stored (TV channels, time and date, TIMER) will be cleared. 1.Switch off this video recorder with STANDBY/ON y. 2.Press and hold RECORD and PROGRAMME+ for 2 seconds or more at the same time. Cassette is jammed in the video recorder: * Don't use force. Pull out the mains plug for a moment. Remote control does not work: * Remote control not pointed toward the video recorder: point it at the video recorder. * There is a technical problem: Take out the batteries, wait for 10 seconds and place them back. * Batteries have run out: change the batteries. No picture when you play a cassette: * There is no recording on the cassette: change the cassette. * You have selected the wrong programme number on the TV for playing cassette: on the TV, select the correct programme number for the video recorder. * The cable connecting the TV set and the video recorder has come loose: check the cable. Poor picture quality when you play a cassette: * Your TV set is not properly adjusted. * The cassette is badly worn or of poor quality: use new cassette. * Tracking is not properly adjusted: turn to section 'Manual Tracking'. No recording possible: * The TV channel you want to record is not stored or you selected the wrong programme number: check TV channels stored. * A cassette was inserted that does not have the security tab (cannot be used to record): Insert a cassette with an intact security tab or change cassette. For more information, please see the section 'Preventing accidental erasing of cassettes' in chapter 'Manual Recording'. * 'VPS/PDC' switched on but 'VPS/PDC time' wrong: enter 'VPS/PDC time' exactly to the minute. Have your aerial checked. There is picture or sound interference on TV reception: * Turn to chapter 'Installing your video recorder' and read 'Setting the RF out channel'. * Have your aerial checked. The wrong TV channel has been selected afteryou programmed a recording using VIDEO Plus+ *1. Enter the Plus Code of the desired TV channel. 2. Check the programme number/channel name in the 'PROG.' input field 3. If this does not correspond to the desired TV channel, select the input field and change the programme number/channel name. 4. Confirm with STATUS/EXIT.
HF3461 300 E MC R700 A785G3 Plus IC-02AT KDL-26U3000 Microwave Temporis 300 Server DI8108 Lexmark C544 Audio Solo Et MSR TH-42PX60EN BP 56 9800S J-9940W DE6544 Mustang-2000 RC-1070 SD-BT2P Lucas MAX OT-S520 KDC-8070W CDE-9841 G2400W PDP-5000EX C2118 Studio Ezxs16W DEH-2100UB TA-N1 14PT1363-11 Archives Factor PC HR2304-10 Chevrolet S10 SP-J720K Camera SD255 EOS 20DA Kyocera KX18 VVX1000 VP-D381 Controller 5200-701 Coolpix L14 Design 2010 SL37H PDR-W839 Jackpot Autohelm 4000 Voiture SLV-SX717D DVP-SR90 SV-MP710V DVP5990 Travelmate-4010 FX-8700G 1 ME Chair RC338 8350I DIR615 Icfir7 680 DUO Nokia N73 SAA7130 DEQ830 S-W150S KP-61PS1K Se-2006 Actifry Rover YST-SW160 DVR-16 DEH-P4200UB Arctic X1b EW Recettes Q1244V FR124 DS14DVF3 EWF1434 DEH-4150SD M1522 MFP LT20-126A WD-65638 P31 NEO LTV-27W7 HD ICD-P17 WX-C50 20PF7835 U1644 Inbuilt Drive HT-TQ25 HL-1040 ML-2571N-XAX 32LG30R-MA
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101