Reviews & Opinions
Independent and trusted. Read before buy Pioneer DCS-360 Uk Only !

Pioneer DCS-360 Uk Only

Manual

Download (English)
Pioneer DCS-360 (uk Only), size: 401 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Pioneer DCS-360  Uk Only About Pioneer DCS-360 Uk Only
Here you can find all about Pioneer DCS-360 Uk Only like manual and other informations. For example: review.

Pioneer DCS-360 Uk Only manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Pioneer DCS-360 Uk Only please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Pioneer DCS-360 Uk Only photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
aldrafting 1:09pm on Sunday, March 28th, 2010 
I came into Vanns on a whim on the iPads launch day not really expecting to see any there still available. I replaced my first-gen iPod Touch, which I had since they first came out a few years ago, with this new beast of a device. First of all.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

WARNING:

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230V or 120V) written on the rear panel. D3-4-2-1-4_En

For Australia Model

WARNING
Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed. D3-4-2-1-7b_A_En

C67-7-3_En

cover & anki.fm 3
CAUTION This product is a class 1 laser product, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. The following caution label appears on your unit. Location: top of the unit

CLASS 1 LASER PRODUCT

D3-4-2-1-8_B_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. S002_En
CAUTION The STANDBY/ON switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).

D3-4-2-2-2a_A_En

Operating Environment

03 Listening to your system
Auto listening mode. Listening in surround sound. Using Front Surround. Listening in stereo. Listening with headphones. Using the SFC modes. Adjusting the bass and treble. Boosting the bass level. 15 15

09 Other connections

Connecting external antennas. 31 Connecting auxiliary audio components. 31 Connecting the S-video output. 31 Connecting using the component video output. 32 About progressive scan video. 32 Using the SCART AV output. 32 Recording mode. 33 Connecting using HDMI. 33 Switching the HDMI audio setting. 34 Resetting the HDMI connection. 34 About HDMI. 34
04 Disc playback features
Scanning discs. 16 Playing in slow motion. 16 Frame advance/frame reverse. 16 Playing a JPEG slideshow. 16 Browsing DVD or Video CD/Super VCD discs with the Disc Navigator. 17 Browsing WMA, MP3, MPEG-4 AAC, DivX video and JPEG files with the Disc Navigator. 18 Looping a section of a disc. 18 Using repeat play. 18 Using random play. 19 Creating a program list. 19 Other functions available from the program menu. 20 Searching a disc. 20 Switching subtitles. 20 Switching language / audio channels. 20 Zooming the screen. 21 Switching camera angles. 21 Displaying disc information. 21
10 Additional information
Disc / content format playback compatibility. 35 Disc compatibility table. 35 About DVD+R/DVD+RW compatibility. 36 About DivX. 36 About MPEG-4 AAC. 37 About WMA. 37 Using and taking care of discs. 37 DVD Video regions. 38
XV-DV353_360_151_252_TOC.fm 5
Installation and maintenance. 38 Hints on installation. 38 Cleaning the pickup lens. 38 Problems with condensation. 38 Moving the system unit. 38 Screen sizes and disc formats. 38 TV system setting. 39 Frequency step setting. 39 Switching off the demo. 39 Troubleshooting. 40 General. 40 DVD/CD/Video CD player. 41 Tuner. 42 USB connection. 42 HDMI connection (U.K. model only). 42 Error Messages. 43 Resetting the system. 43 Setting the Key Lock. 43 Using the language code list. 43 Language code list. 44 Country/Area code list. 44 Specifications. 45

XV-DV353_360_151_252.book 9

Getting started

Chapter 2

English

Home theater sound setup
Place your speakers as shown below for optimal surround sound (see the Speaker Setup Guide for more placement tips). Standard surround 5-spot setup This is a standard multichannel surround sound speaker setup for optimal 5.1 channel home theater sound.
Front left Center Front right Subwoofer
XV-DV151 model speaker setup:

Deutsch

Front left Surround left

Center

Front right Subwoofer Surround right

Listening position

Franais Italiano
After placing your speakers, complete Setting the channel levels below then refer to Speakers settings on page 28 to complete your surround sound setup.
Listening position Surround left Surround right
Setting the channel levels
Set the relative channel levels from your main listening position.2
XV-DV353/151 only: Depending on the size and characteristics of your room, you can choose to use the following setup option:1 Front surround 3-spot setup This setup is ideal when rear surround speaker placement isn't possible or you want to avoid running long speaker cables in your listening area. Use this setup together with the Front Surround modes to take advantage of wall and ceiling reflections for a very realistic surround effect. XV-DV353 model speaker setup:
Front left Center Front right
1 Press TEST TONE. The test tone is output in the following order (from the speakers active in the current listening mode):
L Front left speaker C Center speaker R Front right speaker SR Right surround speaker SL Left surround speaker SW SubwooferUse the VOLUME +/ button to adjust the volume to an appropriate level.

Nederlands Espaol

Subwoofer Surround left Surround right
1 When using this setup, make sure the front surround mode is switched on (page 14) before selecting any surround mode. 2 This is only available when DVD/CD is selected and playback is stopped. Also make sure headphones are unplugged. To adjust the overall balance while listening to any sound source you want, press SETUP, use / to select CH LEVEL then press ENTER. Use / to move channel to channel, and / to adjust the channel levels. Press ENTER when youre finished. 3 Since the subwoofer produces ultra-low frequencies its sound may seem quieter than it actually is.
XV-DV353_360_151_252.book 10
3 Use / to adjust the speaker levels in turn. You should hear the test tone at the same volume from each speaker when seated in the main listening position. The channel level range is 10 dB. 4 When youre done, press ENTER to exit test tone setup.

Playing discs

The basic playback controls for playing DVD, CD, Video CD/Super VCD, DivX video and WMA/MP3/MPEG-4 AAC discs are covered here. Further functions are detailed in chapter 4.

1 In addition, there are three other program types, TEST, ALARM, and NONE. ALARM and TEST are used for emergency announcements. You cant search for these, but the tuner will switch automatically to this RDS broadcast signal. NONE appears when a program type cannot be found. 2 If any noise is picked up while displaying the RT scroll, some characters may be displayed incorrectly. If you see NO RADIO TEXT DATA in the RT display, it means no RT data is sent from the broadcast station. The display will automatically switch to the PS data display (if no PS data, the frequency is displayed). In the PTY display, NO DATA or NONE may be shown. In this case, the PS display is shown after a few seconds. 3 RDS is only possible in the FM band.
XV-DV353_360_151_252.book 25
Audio Settings and Video Adjust menus

Chapter 7

Audio Settings menu
The Audio Settings menu offers features for adjusting the way discs sound.
1 Press HOME MENU and select Video Adjust from the on-screen display.

Video Adjust

1 Press HOME MENU and select Audio Settings from the on-screen display.

Audio Settings

2 Make settings using ENTER.
Video Adjust Sharpness Brightness Contrast Gamma Hue Chroma Level Standard Off 0 0
Select and change settings using and ENTER.
Audio Settings Audio DRC High Medium Low Off
You can adjust the following settings: Sharpness Adjusts the sharpness of edges in the picture (Fine, Standard, Soft) Brightness Adjusts the overall brightness (20 to +20) Contrast Adjusts the contrast between light and dark (16 to +16) Gamma Adjusts the warmth of the picture (High, Medium, Low, Off) Hue Adjusts the red/green balance (Green 9 to Red 9) Chroma Level Adjusts how saturated colors appear (9 to +9) Adjust the Brightness, Contrast, Hue and Chroma Level settings using /.

Brightness min max

Audio DRC
Settings: High, Medium, Low, Off (default) When watching Dolby Digital DVDs at low volume, its easy to lose the quieter sounds completelyincluding some of the dialog. Switching Audio DRC (Dynamic Range Control) to on can help by bringing up the quieter sounds, while controlling loud peaks. How much of a difference you hear depends on the material youre listening to. If the material doesnt have wide variations in volume, you may not notice much change.1

Initial settings menu.fm 27
HDMI Color U.K. model only (See Connecting using HDMI on page 33.) * Default changes depending on device connected.
Full range RGB RGB Component
If colors are weak, this gives brighter colors and deeper black (default setting for HDMI-compatible DVI devices). Use this setting if colors appear overly rich on the Full Range RGB setting. Outputs 8-bit component video format (default setting for HDMI-compatible devices). Set if your TV is not compatible with progressive scan video. Set if your TV is compatible with progressive scan video (see your TVs instruction manual for details). Press ENTER once more to confirm (or RETURN to cancel). Note that progressive scan video is only output from the component video jacks.

Component Out

Australian model only (See also Connecting using the component video output on page 32.)

Interlace Progressive

Language settings

Audio Language

English Languages as displayed Other Language
If there is an English soundtrack on the disc, it is played. If there is a language selected on the disc, it is played. Select to choose a language other than the ones displayed (see Using the language code list on page 43).

Subtitle Language

If there are English subtitles on the disc they are displayed. The subtitle language selected on the disc is displayed. Select to choose a language other than the ones displayed (see Using the language code list on page 43). DVD disc menus are displayed in the same language as your selected subtitle language, if possible. DVD menus are displayed in the selected language, if possible. Select to choose a language other than the ones displayed (see Using the language code list on page 43). Subtitles are displayed in your selected subtitle language. Subtitles are always off by default when you play a DVD disc.

DVD Menu Language

w/Subtitle Lang. Languages as displayed Other Language

Subtitle Display

On Off
XV-DV353_360_151_252.book 28

Display settings

OSD Language
English Languages as displayed
On-screen displays of the player are in English. On-screen displays are shown in the language selected. A camera icon is displayed on-screen during multi-angle scenes on a DVD disc. No multi-angle indication is shown.

Angle Indicator

Options settings
Parental Lock DivX(R) VOD

Display

See Parental Lock below. See About DivX VOD content below.

Speakers settings

Setting Speaker Distance Option What it means Specify the distance of your speakers from your listening position (see Speaker Distance on page 30).

Parental Lock

Default level: Off; Default password: none; Default Country/Area code: us (2119) To give you some control over what your children watch on your DVD player, some DVDVideo discs feature a Parental Lock level. If your player is set to a lower level than the disc, the disc wont play. Some discs also support the Country/Area Code feature. The player does not play certain scenes on these discs, depending on the Country/Area Code you set.

Select Password.

Video Output Language Display Options Speakers
Parental Lock DivX (R) VOD
Password Level Change Country Code
2 Use the number buttons to input a 4-digit password then press ENTER.

Changing your password

To change your password, confirm your existing password then enter a new one.
Registering a new password
Register a password to change the Parental Lock level or enter a Country/Area code.1
1 Select Password Change, input your existing password, then press ENTER. 2 Enter a new password and press ENTER.
1 Not all discs use Parental Lock, and will play without requiring the password first. If you forget your password, youll need to reset the player to register a new password (see Error Messages on page 43).
XV-DV353_360_151_252.book 29
Setting/changing the Parental Lock

1 Select Level Change.

2 Use number buttons to enter your password, then press ENTER. 3 Select a new level and press ENTER. Press repeatedly to lock more levels (more discs will require the password); press to unlock levels. You cant lock level 1.
If you load a disc that contains DivX VOD content not authorized for your player, the message Authorization Error is displayed and the content will not play.
Displaying your DivX VOD registration code
1 Press HOME MENU and select Initial Settings. 2 Select Options, then DivX (R) VOD.
Initial Settings Video Output Language Display Options Speakers Parental Lock DivX (R) VOD Display

XV-DV353_360_151_252.book 33
to select REC MODE then press
Pin No. Assignment 11 Audio R OUT Audio R IN Audio L OUT GND (audio) GND (video) Audio L IN B OUT Status GND (video) No connection G OUT
Pin No. Assignment No connection GND (video) GND (video) R or C OUT BLANK OUT GND (video) GND (video) Video or Y OUT No connection GND (video)
3 Use / to select MODE ON or MODE OFF then press ENTER to confirm. MODE ON Multichannel sources are downmixed to stereo for recording (the same downmix is heard through the front speakers and the subwoofer).
MODE OFF For regular multichannel playback through your speaker system (only the front left and right channels are output from the AV CONNECTOR output).

Connecting using HDMI

U.K. model only If you have a HDMI or DVI (with HDCP) equipped monitor or display, you can connect it to this player using a commercially available HDMI cable for high quality digital video.2 See About HDMI below for more about the HDMI connection.

Recording mode

The Recording mode allows you to make surround-compatible analog recordings from the AV CONNECTOR output.1 Dolby multichannel sources will be downmixed to stereo for improved playback with systems that can provide matrix-decoding (like Dolby Pro Logic).
Use an HDMI cable to connect the HDMI OUT interconnect on this player to an HDMI interconnect on a HDMI-compatible monitor.
1 When Recording mode is on, most sound features cannot be used. The display will briefly blink REC MODE if you try and use a prohibited function while Recording mode is on. The Recording mode switches off if you change the input function ( DVD/CD, TUNER, etc.) or switch the power off. 2 An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Digital Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVI HDMI) to do so. A DVI connection, however, does not support audio signals. Consult your local audio dealer for more information. This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) Version 1.1. Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers. When you change the component connected to the HDMI output, you will also need to change the HDMI settings to match the new component (see Video Output settings on page 26 to do this).

XV-DV353_360_151_252.book 34
Resetting the HDMI connection
HDMI connector HDMI-compatible display
ANTENNA LINE 2 FM UNBAL 75 LINE LINE 11 AV CONNECTOR
If you get an error message (the display shows HDMI ERR) or if the screen goes blank (for example, after changing the resolution), check the troubleshooting guide on page 42. If this doesnt solve the problem, follow the steps below to reset the HDMI connection.
Switch the system into standby.

HDMI OUT

The arrow on the cable connector body should be face up for correct alignment with the connector on the player.
2 Press SETUP and use / to choose HDMI INI then press ENTER. The system will restart and the HDMI settings are automatically reset to the factory defaults. See Video Output settings on page 26 for more on these settings.

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVIcompliant displays. HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multichannel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.
You can also adjust the HDMI settings for resolution and color. For more on these settings see Video Output settings on page 26.
Switching the HDMI audio setting
To listen to audio from the HDMI interconnect, make sure youve specified the HDMI audio output setting.

1 Playback of.avi video files larger than 4GB is not possible. 2 For external subtitle files the following subtitle format filename extensions are supported (please note that these files are not shown within the disc navigation menu):.srt,.sub,.ssa,.smi Some external subtitle files may be displayed incorrectly or not at all. The filename of the movie file has to be repeated at the beginning of the filename for the external subtitle file. The number of external subtitle files which can be switched for the same movie file is limited to a maximum of 10.
XV-DV353_360_151_252.book 37
Group 3: Bulgarian (bg), Byelorussian (be), Macedonian (mk), Russian (ru), Serbian (sr), Ukrainian (uk) Group 4: Hebrew (iw), Yiddish (ji) Group 5: Turkish (tr)
Using and taking care of discs

Handling discs

Hold the disc by its edges when handling so as not to leave fingerprints, dirt or scratches on either side of the disc. Damaged or dirty discs can affect playback performance. If a disc becomes marked with fingerprints, dust, etc., clean using a soft, dry cloth.
DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

About MPEG-4 AAC

Advanced Audio Coding (AAC) is at the core of the MPEG-4 AAC standard, which incorporates MPEG-2 AAC, forming the basis of the MPEG-4 audio compression technology. The file format and extension used depend on the application used to encode the AAC file. This unit plays back AAC files encoded by iTunes bearing the extension '.m4a'. DRM-protected files will not play, and files encoded with some versions of iTunes may not play, or filenames may display incorrectly.
Apple and iTunes are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
Wipe lightly from the center of the disc using straight strokes. Dont wipe the disc surface with circular strokes. If necessary, use a cloth soaked in alcohol, or a commercially available CD/DVD cleaning kit to clean a disc more thoroughly. Never use benzine, thinner or other cleaning agents such as those designed for cleaning vinyl records.

About WMA

Storing discs
Avoid leaving discs in excessively cold, humid, or hot environments (including under direct sunlight). Don't glue paper or put stickers onto the disc, or use a pencil, ball-point pen or other sharp-tipped writing instrument. These could all damage the disc.
The Windows Media logo printed on the box indicates that this player can playback Windows Media Audio content. WMA is an acronym for Windows Media Audio and refers to an audio compression technology developed by Microsoft Corporation. WMA content can be encoded by using Windows Media Player version 7, 7.1, Windows Media Player for Windows XP, or Windows Media Player 9 Series.
Microsoft, Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

DVD/Super VCD/ Video CD/DivX Video Format NTSC NTSC PAL NTSC NTSC PAL PAL PAL AUTO NTSC PAL
1 With the unit in standby, press SETUP. 2 Use / to choose DEMO then press ENTER. 3 Use / to select DEMO OFF and press ENTER.
3 Using the 16:9 (Wide) setting with a standard 4:3 TV, or one of the 4:3 settings with a widescreen TV, will result in distortion. When you watch discs recorded in 4:3 format, you can use the TV controls to select how the picture is presented. Your TV may offer various zoom and stretch options; see the instructions that came with your TV for details. Some movie aspect ratios are wider than 16:9, so even with a widescreen TV, these discs will still play in a letterbox style. 1 Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without color. If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom of the screen. 2 You have to switch the player into standby (press STANDBY/ON) before each change.
XV-DV353_360_151_252.book 40

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work. If the system does not operate normally due to external effects such as static electricity disconnect the plug from the outlet and insert again to return to normal operating conditions.

General

Problem
The power does not turn on, or switches off suddenly (an error message may be displayed at startup).

Remedy

Wait for one minute before switching back on. Make sure there are no loose strands of wire touching the unit. This could cause the system to shut off automatically. Check that the speakers are connected correctly. Make sure the voltage of the mains power source is correct for the model. Try reducing the volume level. If the problem persists, take it to your nearest Pioneer authorized service center or your dealer for servicing. If youre using the line input, make sure the component is connected correctly (see Connecting auxiliary audio components on page 31). Press MUTE on the remote control to turn muting off.

No sound is output when a function is selected.
No sound from surround Refer to Setting the channel levels on page 9 to check the speaker levels. or center speakers. When TUNER or LINE is selected, you can only hear the source in stereo. Switch the input source to DVD/CD or USB for multichannel sound. Check that the Recording mode hasnt been switched on (see Recording mode on page 33). Check that you havent selected the STEREO mode (see Listening in surround sound on page 14). Connect the speakers properly (refer to the Setup Guide). Cant operate the remote Replace the batteries (refer to the Setup Guide). control. Operate within 7 m, 30 of the remote sensor (refer to the Setup Guide). Remove any obstacles or operate from another position. Avoid exposing the remote sensor on the front panel to direct light. TRAYLOCK shows in the Press and hold (eject) on the front panel for about eight seconds. Then the tray display and the tray cant can be opened/closed using (eject). be ejected. SND. DEMO shows in the display and the unit cant be controlled. Press and hold (stop) on the front panel for about five seconds. The disc tray ejects automatically to indicate the Sound Demo mode is disabled.
XV-DV353_360_151_252.book 41

DVD/CD/Video CD player

The disc is ejected automatically after loading.
Clean the disc and align the disc properly in the disc guide. If the region number on a DVD-video disc does not match the number on the player, the disc cannot be used (see DVD Video regions on page 38). Allow time for any condensation inside the player to evaporate. Avoid using the player near an air-conditioning unit. If the disc is loaded upside down, reload the disc with label side face up. Press (stop), then (play) to start playback again. Switch the power off once, then on again using the front panel STANDBY/ON button. When the power is cut, settings will be canceled. Check that connections are correct and that plugs are inserted fully. Check the manual of the TV/monitor to make sure the settings are correct. The TV Screen setting is incorrect. Set the TV Screen option to match the TV/ monitor you're using (see Video Output settings on page 26). This system uses copy-protection technology which may prevent recording or cause picture problems when connected through a VCR or AV selector. This is not a malfunction.
Playback not possible. Picture playback stops and buttons cannot be used. Settings are canceled. No picture/No color. Screen is stretched or aspect doesnt change. When recorded on a VCR or passed through an AV selector, there is disturbance in the playback picture.
Franais Italiano Nederlands Espaol
Picture disturbance This player is compatible with Macro-Vision System copy guard. Some discs during playback or dark. include a copy prevention signal, and when this type of disc is played back, stripes etc., may appear on some sections of the picture depending on the TV. This is not a malfunction. Discs respond differently to particular player functions. This may result in the screen becoming black for a brief instant or shaking slightly when the function is executed. These problems are largely due to differences between discs and disc content and are not malfunctions of this player. Noticeable difference in DVDs and CDs use different recording methods. This is not a malfunction. DVD and CD volume. CD-ROM disc is not recognized. DVD-ROM disc is not recognized. Files dont show up in the Disc Navigator/ Photo Browser. Cant play WMA or MPEG-4 AAC files. Make sure that the CD-ROM was recorded using the ISO 9660 disc format. See Disc compatibility table on page 35 for more on disc compatibility. Make sure that the DVD-ROM was recorded using the UDF bridge format. See Disc compatibility table on page 35 for more on disc compatibility. The files on the disc must be named with the correct file extension:.mp3 for MP3 files;.wma for WMA files;.m4a for MPEG-4 AAC files;.jpg for JPEG files (upper or lower-case is OK). See Disc compatibility table on page 35. The files were recorded using DRM (digital rights management).This is not a malfunction.

XV-DV353_360_151_252.book 42
Considerable noise in radio broadcasts.
Connect the AM antenna (refer to the Setup Guide) and adjust the direction and position for best reception. You may also connect an additional internal or external AM antenna (refer to Connecting auxiliary audio components on page 31). Fully extend the FM wire antenna, position for best reception, and secure to a wall. You may also connect an outdoor FM antenna (see Connecting external antennas on page 31). Turn off other equipment that may be causing the noise or move it further away.
Australian model only The tuning interval is incorrect for your country or region. See Frequency step setting on page 39 to switch the tuning interval.
Auto tuning does not pick up some stations. The radio signal is weak. Auto tuning will only detect radio stations with a good signal. For more sensitive tuning, connect an outdoor antenna.

USB connection

Problem Remedy
USB mass storage Make sure you have completely inserted the USB connector to this unit. device is not recognized Check that the memory format is FAT16 or FAT32. by the system. USB devices with an internal USB hub are not supported. Files dont show up in the Navigator/Photo Browser. Cant play WMA or MPEG-4 AAC files. The files must have the correct file extension:.mp3 for MP3 files;.wma for WMA files;.m4a for MPEG-4 AAC files;.jpg for JPEG files (upper or lower-case is OK). Make sure the file permission hasnt been restricted (through a password, etc.). The files were recorded using DRM (digital rights management) or FairPlay copyprotection. This is not a malfunction.
HDMI connection (U.K. model only)
No HDMI audio output. No HDMI video output
See Switching the HDMI audio setting on page 34 to make sure that AUDIO ON is selected. Make sure that youve selected this player as the HDMI input in the settings for the component youre using (refer to the components instruction manual). Check that the HDMI cable is connected properly and isnt damaged. Check that components connected using the HDMI interface are switched on and HDMI compatible. (components must be compatible with both DVI and High Bandwidth Digital Content Protection (HDCP).) This unit has been designed to be compliant with HDMI Version 1.1. Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers. Make sure the resolution on this player matches that of the component you have connected using HDMI (see Video Output settings on page 26). If the screen goes blank after changing the resolution, it means the you selected a resolution incompatible with your monitor. See Resetting the HDMI connection on page 34 to reset to the factory defaults.

Note Specifications and design subject to possible modification without notice, due to improvements.
Non-skid pads (small). 12 Non-skid pads (large). 4 Mounting brackets. 4 Screws (for mounting brackets). 4
XV-DV353_360_151_252.book 47
This product includes FontAvenue fonts licenced by NEC corporation. FontAvenue is a registered trademark of NEC Corporation. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. DRM (digital rights management) copy protection is a technology designed to prevent unauthorized copying by restricting playback, etc. of material on devices other than the PC (or other WMA recording equipment) used to record it. For detailed information, please see the instruction manuals or help files that came with your PC and/or software.
Manufactured under license from Dolby Laboratories.Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc.
XV-DV353_360_151_252.book 48
Published by Pioneer Corporation Copyright 2006 Pioneer Corporation All rights reserved

PIONEER CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270 <06A000001> Printed in <ARB7352-A>

 

Tags

VGN-SR21m S EW541F Aqxxl 129 TX-32LE60P STR-DA5300ES 17-inch Single 2 7880C 5903R Vivicam 3935 CP-800 Control CDP-C500 LTH T300 G2420 WXI477 Meter Iiif DVX350 VGN-AR170P GA-6wmmc7-1 DES-3018 Series NVT 300 ESF 2435 SGH-X520 Baseball 2005 Dslr-A500L LE26C350d1W KX-TC1486 CDX-GT100 System DV 6800 HD502HJ VGN-FW21L 300 XC AWT1045AA Future XTR-325 KLV-V32a10 VSX-815-K HT-R520 Dobsonian XT8 Handheld Princeton 65 CT-S99WR HV-maxx S30AW PMA525500 Rj45 18M Sqlite KH 6778 795MB CPX 2600 DVD-HR738 MS8308D TY-TP50p10S CFD-G700CP VPL-BW7 NAD C270 5XI XD-852 DVH-P5050MP WF8692NHS DVD-S2500 DSC-W290 T NW-E407 6615LCT DGN2000 Z1485 DVH-3100UB Radiance S PRO 940N Plus Photosmart M527 32PW9765 The Dead SE2010MFX CU-L28dbe5 Behringer B300 Seiko SNQ GN-234SQA PF-800 Review MDS-S40 Charger MX-1700 Zoom EN 1 IS7-V2 Battle Bugs MK-225C Gpsmap 540 M1100 DEH-3050UB 32PW8806 ES-8161 Septerra Core VD-4500 32PW9618 PCL 5 KX-T2886E ICD-MS515

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101