Reviews & Opinions
Independent and trusted. Read before buy Pioneer DEH-1770!

Pioneer DEH-1770


Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Pioneer DEH-1770 Car Audio, size: 565 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Pioneer DEH-1770About Pioneer DEH-1770
Here you can find all about Pioneer DEH-1770 like manual and other informations. For example: review.

Pioneer DEH-1770 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Pioneer DEH-1770 please write about it to help other people.


[ Report abuse or wrong photo | Share your Pioneer DEH-1770 photo ]

Video review

Maria Ercolano: Cara deh resta in pace; De Majo (Motezuma)


User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
Nicolas36 8:40pm on Tuesday, November 2nd, 2010 
Great deck for the money. I purchased this for my 1988.5 Suzuki Samurai, mainly to add Ipod support.

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




Operation Manual

High power CD player with FM/AM tuner



Espaol Portugus (B)

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference.
Before You Start About this unit 3 Protecting your unit from theft 3 Removing the front panel 3 Attaching the front panel 3 Whats What Head unit 4 Power ON/OFF Turning the unit on and selecting a source 5 Turning the unit off 5 Tuner Listening to the radio 6 Storing and recalling broadcast frequencies 6 Tuning in strong signals 6 Storing the strongest broadcast frequencies 7 Built-in CD Player Playing a CD 8 Playing tracks in a random order 8 Repeating play 8 Pausing CD playback 8 Audio Adjustments Introduction of audio adjustments 9 Using balance adjustment 9 Using the BTB (bass treble booster) 9 Adjusting BTB 9 Adjusting loudness 10 Adjusting source levels 10 Initial Settings Adjusting initial settings 11 Setting the clock 11 Turning the clock display on or off 11 Setting the FM tuning step 11 Additional Information Understanding built-in CD player error messages 12 CD player and care 12 CD-R/CD-RW discs 12 Specifications 14


Before You Start

About this unit

The tuner frequencies on this unit are allocated for use in Central or South America. Use in other areas may result in poor reception.


! Never use force or grip the display and the buttons too tightly when removing or attaching. ! Avoid subjecting the front panel to excessive shocks. ! Keep the front panel out of direct sunlight and high temperatures.

Removing the front panel

1 Press DETACH to release the front panel. Press DETACH and the right side of the panel is released from the head unit. 2 Grab the front panel and remove. Grab the right side of the front panel and pull away to the left. The front panel will be detached from the head unit.
! Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, this unit damage, smoke, and overheat could result from contact with liquids. ! Keep this manual handy as a reference for operating procedures and precautions. ! Always keep the volume low enough so that you can hear sounds from outside the vehicle. ! Protect this unit from moisture. ! If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. ! If this unit does not operate properly, contact your dealer or nearest authorized Pioneer Service Station.


3 Put the front panel into the protective case provided for safe keeping.
Attaching the front panel
1 Place the front panel flat against the head unit. 2 Press the front panel into the face of the head unit until it is firmly seated.
Protecting your unit from theft
The front panel can be detached from the head unit and stored in the protective case provided to discourage theft.

Whats What

Head unit
1 CLOCK button Press to change to the clock display. 2 BTB button Press to select various BTB (bass treble booster) setting. 3 Disc loading slot Insert a disc to play. 4 LOUDNESS button Press to turn loudness on or off. 5 EJECT button Press to eject a CD from your built-in CD player. 6 AUDIO button Press to select various sound quality controls. 7 c/d buttons Press to do manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. 8 DETACH button Press to remove the front panel from the head unit.
9 BAND button Press to select among three FM bands and one AM band and to cancel the control mode of functions. a LOCAL/BSM button Press to turn local function on or off. Press and hold to turn BSM function on or off. b 16 buttons Press for preset tuning. c SOURCE button This unit is turned on by selecting a source. Press to cycle through all the available sources. d VOLUME (+/) buttons Press to increase or decrease the volume.

Power ON/OFF

Turning the unit on and selecting a source
You can select a source you want to listen to. To switch to the built-in CD player, load a disc in the unit (refer to page 8). % Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources: Built-in CD playerTuner When you select a source the unit is turned on.
Notes ! When no disc has been set in the unit, the source will not switch to the built-in CD player. ! When this units blue/white lead is connected to the vehicles auto-antenna relay control terminal, the vehicles antenna extends when this units source is turned on. To retract the antenna, turn the source off.

Turning the unit off

% Press SOURCE and hold until the unit turns off.

Listening to the radio

# If you press and hold c or d you can skip stations. Seek tuning starts as soon as you release the button.
Storing and recalling broadcast frequencies
If you press any of the preset tuning buttons 16 you can easily store up to six broadcast frequencies for later recall with the touch of a button. ! Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory. % When you find a frequency that you want to store in memory press one of preset tuning buttons 16 and hold until the preset number stops flashing. The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same preset tuning button the radio station frequency is recalled from memory.
1 Band indicator Shows which band the radio is tuned to, AM or FM. 2 LOC indicator Shows when local seek tuning is on. 3 Stereo (5) indicator Shows that the frequency selected is being broadcast in stereo. 4 Frequency indicator Shows to which frequency the tuner is tuned. 5 Preset number indicator Shows which preset has been selected. Press SOURCE to select the tuner. Use VOLUME to adjust the sound level.
3 Press BAND to select a band. Press BAND until the desired band is displayed, F1, F2, F3 for FM or AM. 4 To perform manual tuning, briefly press c or d. 5 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. % Press LOCAL/BSM repeatedly to turn local seek tuning on or off. When local seek tuning is on, LOC appears in the display.
# You can cancel seek tuning by briefly pressing either c or d.
Storing the strongest broadcast frequencies
BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 16 and once stored there you can tune in to those frequencies with the touch of a button. ! Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 16. % Press LOCAL/BSM and hold until the BSM turns on. BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under preset tuning buttons 16 in the order of their signal strength. When finished, BSM stops flashing.

# To cancel the storage process, press LOCAL/BSM.

Built-in CD Player

Playing a CD
Playing tracks in a random order
Random play lets you play back tracks on the CD in a random order.
1 Track number indicator Shows the track currently playing. 2 Play time indicator Shows the elapsed playing time of the current track. 1 Insert a CD into the CD loading slot. Playback will automatically start.
% Press 4 repeatedly to turn random play on or off. When random play is on, RDM appears in the display.

Repeating play

Repeat play lets you hear the same track over again. % Press 5 repeatedly to turn repeat play on or off. When repeat play is on, RPT appears in the display.
# Be sure to turn up the label side of a disc. # After a CD has been inserted, press SOURCE to select the built-in CD player. # You can eject a CD by pressing EJECT.
Use VOLUME to adjust the sound level.
# If you perform track search or fast forward/reverse, repeat play is automatically cancelled.
3 To perform fast forward or reverse, press and hold c or d. 4 To skip back or forward to another track, press c or d. Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track.
Notes ! The built-in CD player plays one, standard, 12cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs. ! Do not insert anything other than a CD into the CD loading slot. ! If an error message such as ERROR-11 is displayed, refer to Understanding built-in CD player error messages on page 12.

Pausing CD playback

Pause lets you temporarily stop playback of the CD. % Press 6 repeatedly to turn pause on or off. When pause is on, PAUSE appears in the display.

Audio Adjustments

Introduction of audio adjustments
2 Press + or to adjust front/rear speaker balance. FAD F15 FAD R15 is displayed as the front/ rear speaker balance moves from front to rear.
# FAD 0 is the proper setting when only two speakers are used.

1 Audio display Shows the audio adjustments status. 2 LOUD indicator Appears in the display when loudness is turned on. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)BASS (bass adjustment)TREBLE (treble adjustment) LOUD (loudness)SLA (source level adjustment)
# When selecting the FM tuner as the source, you cannot switch to SLA. # If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. # To return to the display of each source, press BAND.
3 Press c or d to adjust left/right speaker balance. BAL L9 BAL R9 is displayed as the left/right speaker balance moves from left to right.
Using the BTB (bass treble booster)
There are five stored BTB settings such as DYNAMIC, POWER, MAX, CUSTOM and FLAT that can easily recall at any time. ! CUSTOM is an adjusted BTB setting that you create. ! When FLAT is selected no supplement or correction is made to the sound. This is useful to check effect of the BTB settings by switching alternatively between FLAT and set BTB setting. % Press BTB to select the desired BTB setting. Press BTB repeatedly to switch between the following BTB setting: POWERMAXCUSTOMFLAT DYNAMIC

Using balance adjustment

You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1
# If the balance setting has been previously adjusted, BAL will be displayed.

Adjusting BTB

You can adjust the currently selected BTB setting as desired. Adjusted BTB settings are memorized in CUSTOM.
Press AUDIO to select FAD.

Adjusting bass

You can adjust the bass level.
Press AUDIO to select BASS.
2 Press + or to adjust the bass level. +is displayed as the level is increased or decreased.
1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Press AUDIO to select SLA.

Adjusting treble

You can adjust the treble level. 1 Press AUDIO to select TREBLE.
3 Press + or to adjust the source volume. SLA +4 SLA 4 is displayed as the source volume is increased or decreased.
2 Press + or to adjust the treble level. +is displayed as the level is increased or decreased.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD.
2 Press + to turn loudness on. LOUD indicator is displayed.
# To turn loudness off, press. # You can also turn loudness on or off by pressing LOUDNESS.
3 Press c or d to select a desired level. LOW (low)HI (high)

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume level, which remains unchanged. ! The AM tuner volume level can also be adjusted with source level adjustments.

Initial Settings

Adjusting initial settings
Initial settings lets you perform initial setup of different settings for this unit. 1 Function display Shows the function status. 1 Press SOURCE and hold until the unit turns off. 2 Press AUDIO and hold until clock appears in the display. Press AUDIO repeatedly to switch between the following settings: ClockFM (FM tuning step) Use the following instructions to operate each particular setting.
# To cancel initial settings, press BAND. # You can also cancel initial settings by holding down AUDIO until the unit turns off.
3 Press + or to set the clock. Pressing + will increase the selected hour or minute. Pressing will decrease the selected hour or minute.
Turning the clock display on or off
You can turn the clock display on or off. % Press CLOCK to turn the clock display on or off. Each press of CLOCK turns the clock display on or off.
# The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds.
Setting the FM tuning step
The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. ! If seek tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again. 1 Press AUDIO to select FM.

Setting the clock

Use these instructions to set the clock. 1 Press AUDIO to select clock.
2 Press c or d to select the segment of the clock display you wish to set. Pressing c or d will select one segment of the clock display: HourMinute As you select segments of the clock display the segment selected will blink.
2 Press c or d to select the FM tuning step. Press c to select 50 (50 kHz). Press d to select 100 (100 kHz).


Additional Information
Understanding built-in CD player error messages

When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message.
Message Cause Action Clean disc. Replace disc. Turn the ignition ON and OFF, or switch to a different source, then back to the CD player. Replace disc.
! Store discs in their cases when not in use. ! Keep discs out of direct sunlight and do not expose the discs to high temperatures. ! Do not attach labels, write on or apply chemicals to the surface of the discs. ! To clean a CD, wipe the disc with a soft cloth outward from the center.
ERROR-11, 12, Dirty disc 17, 30 ERROR-11, 12, Scratched disc 17, 30 ERROR-10, 11, Electrical or me12, 17, 30, A0 chanical


All tracks are skip tracks
! If the heater is used in cold weather, moisture may form on components inside the CD player. Condensation may cause the CD player to malfunction. If you think that condensation is a problem turn off the CD player for an hour or so to allow it to dry out and wipe any damp discs with a soft cloth to remove the moisture. ! Road shocks may interrupt CD playback.

CD player and care

! Use only CDs that have the Compact Disc Digital Audio mark as show below.

CD-R/CD-RW discs

! When CD-R/CD-RW discs are used, playback is possible only for discs which have been finalized. ! It may not be possible to play back CD-R/ CD-RW discs recorded on a music CD recorder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc., on the lens of this unit. ! Playback of discs recorded on a personal computer may not be possible, depending on the application settings and the environment. Please record with the correct format. (For details, contact the manufacturer of the application.)
! Use only normal, round CDs. If you insert irregular, non-round, shaped CDs they may jam in the CD player or not play properly.
! Check all CDs for cracks, scratches or warping before playing. CDs that have cracks, scratches or are warped may not play properly. Do not use such discs. ! Avoid touching the recorded (non-printed) surface when handling the disc.
! Playback of CD-R/CD-RW discs may become impossible in case of direct exposure to sunlight, high temperatures, or the storage conditions in the vehicle. ! This unit conforms to the track skip function of the CD-R/CD-RW disc. The tracks containing the track skip information are skipped automatically. ! If you insert a CD-RW disc into this unit, time to playback will be longer than when you insert a conventional CD or CD-R disc. ! Read the precautions with CD-R/CD-RW discs before using them.



04.7.27 9:31 AM

Page 1


Before making a final installation of the unit, temporarily connect the wiring to confirm that the connections are correct and the system works properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. Install the unit where it does not get in the drivers way and cannot injure the passenger if there is a sudden stop, like an emergency stop. The semiconductor laser will be damaged if it overheats, so dont install the unit anywhere hot for instance, near a heater outlet. If installation angle exceeds 60 from horizontal, the unit might not give its optimum performance. (Fig. 1) When installing, to ensure proper heat dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents.


Removing the Unit (Fig. 3) (Fig. 4)
5. Frame To remove the frame, extend top and bottom of the frame outwards in order to unlock it. (When reattaching the frame, point the side with a groove downwards and attach it.) It becomes easy to remove the frame if the front panel is released. 6. Insert the supplied extraction keys into the unit, as shown in the figure, until they click into place. Keeping the keys pressed against the sides of the unit, pull the unit out.




DIN Rear-mount
Installation using the screw holes on the side of the unit (Fig. 5) (Fig. 6) (Fig. 7) 1. Remove the frame.
7. Frame To remove the frame, extend top and bottom of the frame outwards in order to unlock it. (When reattaching the frame, point the side with a groove downwards and attach it.) It becomes easy to remove the frame if the front panel is released.

Fig. 1

Fig. 3

Fig. 5

Fig. 7

DIN Front/Rear-mount

This unit can be properly installed either from Front (conventional DIN Front-mount) or Rear (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit chassis). For details, refer to the following illustrated installation methods.
2. Fastening the unit to the factory radio mounting bracket.
8. Select a position where the screw holes of the bracket and the screw holes of the head unit become aligned (are fitted), and tighten the screws at 2 places on each side. Use either truss screws (mm) or flush surface screws (mm), depending on the shape of the screw holes in the bracket. 9. Screw 10. Factory radio mounting bracket 11. Dashboard or Console

DIN Front-mount

Installation with the rubber bush (Fig. 2)
1. Dashboard 2. Holder After inserting the holder into the dashboard, then select the appropriate tabs according to the thickness of the dashboard material and bend them. (Install as firmly as possible using the top and bottom tabs. To secure, bend the tabs 90 degrees.) 3. Rubber bush 4. Screw
This product conforms to new cord colors. Los colores de los cables de este producto se conforman con un nuevo cdigo de colores. As cores dos fios deste produto seguem um novo padro de cores.

Fig. 2

Montaje delantero DIN

Instalacin con tope de goma (Fig. 2)
1. Tablero de instrumentos 2. Soporte Despus de insertar el soporte en la tabla de mandos, luego seleccione las orejetas apropiadas segn el grosor del material de la tabla de mandos y dblelos. (Instale lo ms firme posible usando las lengetas superior e inferior. Para fijar, doble las lengetas 90 grados.) 3. Tope de goma 4. Tornillo

Montagem dianteira DIN

Instalao com uma bucha de borracha (Fig. 2)
1. Painel de instrumentos 2. Sujeitador Depois de inserir o sujeitador no painel de instrumentos, escolha as lingetas apropriadas de acordo com a espessura do material do painel de instrumento, e dobre-as. (Instale o mais firme possvel usando as lingetas superior e inferior. Para fixar, dobre as lingetas 90 graus.) 3. Bucha de borracha 4. Parafuso

Page 9

Connecting the Units
5. Connecting cords with RCA pin plugs (sold separately) 1. This Product 7. Power amp (sold separately) This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, truck, or bus, check the battery voltage. To avoid shorts in the electrical system, be sure to disconnect the battery cable before beginning installation. Refer to the owners manual for details on connecting the power amp and other units, then make connections correctly. Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape around them where they lie against metal parts. Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake and seat rails. Do not route wiring in places that get hot, such as near the heater outlet. If the insulation of the wiring melts or gets torn, there is a danger of the wiring short-circuiting to the vehicle body. Dont pass the yellow lead through a hole into the engine compartment to connect to the battery. This will damage the lead insulation and cause a very dangerous short. Do not shorten any leads. If you do, the protection circuit may fail to work when it should. Never feed power to other equipment by cutting the insulation of the power supply lead of the unit and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating. When replacing the fuse, be sure to only use a fuse of the rating prescribed on this unit. Since a unique BPTL circuit is employed, never wire so the speaker leads are directly grounded or the left and right speaker leads are common. Speakers connected to this unit must be highpower with minimum rating of 45 W and impedance of 4 to 8 ohms. Connecting speakers with output and/or impedance values other than those noted here may result in the speakers catching fire, emitting smoke, or becoming damaged. When this products source is switched ON, a control signal is output through the blue/white lead. Connect to an external power amps system remote control or the cars Auto-antenna relay control terminal (max. 300 mA 12 V DC). If the car features a glass antenna, connect to the antenna booster power supply terminal. When an external power amp is being used with this system, be sure not to connect the blue/white lead to the amps power terminal. Likewise, do not connect the blue/white lead to the power terminal of the auto-antenna. Such connection could cause excessive current drain and malfunction. To avoid a short-circuit, cover the disconnected lead with insulating tape. Insulate the unused speaker leads without fail. There is a possibility of a short-circuit if the leads are not insulated. If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition switch, the red lead of the unit should be connected to a terminal coupled with ignition switch ON/OFF operations. If this is not done, the vehicle battery may be drained when you are away from the vehicle for several hours.



Motorola V180 Live HUB Kodak C142 TX-SR804E DAR440W C-70 Zoom SGH-A687 CMT-A70 AVR 320 Pro USB FAR-2127 HD120IJ Bluetooth F5D5131-5-QIG Fishfinder DCR-SR55E Ezai2997 TEL 2 Crocodile HTS3450-37B CF-430 W810I NAD T163 2 TH-42PA20A 41856 DCR-DVD705E DPF-3010 JMP-1 EL160ISB D-580 Zoom WA10V5 8300MR Aztek 2001 Extra LE-19R86BD LH-T755 SDV2210 AV-29WS3 F5D5230 MP450 R-340C 341C DVP-CX850D F150-2001 LE52B620r3W Boss DD-3 Letra LRE-154 SRT9320 Iii-tutorial 500SI YST-SW120 Fireworks Minitower PC Wpxh214 Yamaha QX1 Review Aspire 7100 SCC-643 Maestro 4050 HDR-XR550E Asus A7VE SD-P1400 9512 TS SP1613N SR1000 RTT3351 EP738 Lab 650 MZ-E900 CD1453B-02 SB4200 CRW8824S S10-3T GR-P257STB Elite 32PFL5403 KD-S821R Canon S330 LCR 2000 RH4820 LFC25760ST P2010 BKT-8 KEH-P1015 RT-950BX CD-5090 SHR-2080P250 VS-DT6R HDC-XR200E DR 2930 Boss ICF-SW7600GR Fostex 2412 ANT70-1400N Plastifieuse G41MH-GE Ultra MX5021 TL-SG2224WEB Veva 1200


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101