G l o s s a r y

Head Unit Section
AUI (Auditory User Interface)

Details on page 5.

DIGITAL-SFC

PC-LINK READY

Digital SFC (Sound Field Control)
Theres no need for the user to adjust anything to recreate the acoustics of a concert venue. Digital Sound Field Control (SFC) applies varying degrees of reverberation and echo to enhance the ambience of music with four field settings: e.g. Studio, Club.
PC-Link (OEL Screensaver Studio) Ready

Auto EQ

Pure Blue OEL (Organic EL) Display

Details on page 6.

Bass Boost

Details on page 8.

RCA EEQ

BBE DIGITAL

BBE adds a longer delay time to the lower frequencies and slightly boosts the high range which tends to become attenuated, so that it recovers its natural articulation. The result: greater live presence with the brilliance and clarity of the original sound.

Easy Equalizer

Details on page 11.

RCA selectable

RCA Output or RCA Preout
The standard connection system to carry sound from a head unit to an amplifier or equalizer. RCA preouts provide easy output for connection to an outboard amplifier.
EQ-EX (Equalizer Expansion) gives a boost to the current preset equalizer settings. By pressing the EQ-EX button each EEQ curve is acoustically tuned for optimum effect, giving a more dramatic effect and a new edge to music.

BUILT-IN DSP

SUPERTUNER IIID SUPERTUNER III SUPERTUNER
Pioneers original Supertuner and Supertuner III ensure exceptional sensitivity, handling of multipath interference, and resistance to Three Signal Intermodulation (TSI). Supertuner IIID has advanced analog and digital blocks for excellent sound and sensitivity, smoother broadcasting reception and expanded signal reception.

Digital Signal Processor

DSP uses digital technology to correct a vehicles interior acoustics. The system also offers various sound fields to recreate different listening environments in your car (Studio, Jazz, Club, etc.).
Full-color OEL (Organic EL) Display

Details on page 4.

HI-VOLTAGE PREOUT
Pioneers High-Voltage Preout maximizes signal strength to your amp. The benefits are superior dynamics, crisper highs, more full-bodied bass, and a higher signal-to-noise ratio for minimal noise interference attributable to connections.

CD CONTROL

This indicates head units with Multi-CD control or with AUX input.

CD-R/RW Compatibility

All Pioneer CD head units can play back CD-R/RW discs, allowing the user to enjoy favorite compilations in-car.

SUPERTUNER IIID+

This refinement of Supertuner technology features FM Multi-path Canceller with an adaptive digital filter to minimize multi-path noise and improve stereo reception and separation; AM Noise Canceller with Hi-Speed Gate control to reduce interference of undesirable noises from wipers, engine, ignition, etc.; and Automatic Reception Control to reinforce noise reduction in weak signal areas.

iPod Adapter Ready

Details on page 7.

MOSFET 50 W 4

Details on page 10.

CD TEXT

Recorded music CDs compatible with CD Text can include various information to be read from the CD as text during playback.
Popular compression format that allows large amounts of audio files to be stored onto one CD-R/RW disc. Pioneer players come equipped with buffering capabilities, so they are all able to handle data rates from 16 kbps and VBR (Variable Bit Rate) recording.

Auto TA & EQ: Measuring Speaker (DEH-P80RS)
Auto TA & EQ: Adjusting EQ (DEH-P80RS)
Digital delay processing makes all speakers sound as if they are virtually equidistant from the listener, for a clearer, front-focused soundstage.

DEH-P8850MP

4 - Channel High-Power WMA/MP3/A AC/CD Receiver
With an unprecedented full-color OEL display, multi-format digital file playback and versatile DSP, the leading face among Pioneer head units has a kaleidoscopic array of entertaining capabilities.
Full-color dot-matrix OEL (Organic EL) display iTunes AAC playback WAV file playback iPod adapter ready Burr Brown D/A Converter Built-in DSP EEQ 5-mode preset equalizer 2-mode custom preset equalizer Auto EQ BBE digital sound processing* Digital listening position selector Auto time alignment BMX (Bitmetric Equalizer) L/R common 16-band digital graphic equalizer 2-way crossover: HPF/LPF ASL (Auto Sound Levelizer) Auto-slide face Rotary Commander 3 RCA preouts (front + rear + subwoofer) Level indicator Spectrum analyzer Multi-language display (English/Spanish/Portuguese)
*BBE: Licensed by BBE Sound, Inc. under USP4638258 and 4482866. BBE and BBE symbol are registered trademarks of BBE Sound Inc.
CD CONTROL 3 RCA BUILT-IN DSP PC-LINK READY CD TEXT
SUPERTUNER IIID HI-VOLTAGE PREOUT EEQ BBE DIGITAL DIN-D
Finding the sweet spot or optimal listening position is complicated by sounds reflection and damping, as well as variable speaker positioning in the irregularly shaped confines of a car. Such conditions tend to degrade frequency characteristics. Auto EQ helps you enjoy the best sound quality you can get in a car, using a microphone to monitor acoustic conditions, then automatically setting frequency response curve equalization. Its like having a sound engineer customize your in-car sound system.
Auto EQ Adjustment Example
After adjustment Response (dB)
Microphone for Auto EQ frequency band fine-tuning Before adjustment 20 Frequency (Hz) 20 k
For smoother low- to high-range sound.
Full-Color OEL (Organic EL) Display
Choose among four types of gauges to view battery voltage, tachometer and sound level information.
Pioneering the First Receiver with 65,536-Color OEL Display Pioneer presents the DEH-P8850MP with full-color (65,536-color*) OEL display capable of displaying motion and 3D animated graphics in multiple colors. Featuring OEL technology that is arguably the greatest advance in car entertainment displays since the detachable face was introduced, this innovation complements Pioneers renowned audio quality with a dash of uniquely brilliant visual impact.
*Up to 256 colors can be displayed simultaneously in animated images.
Theres no need to glance at the display to confirm system status. The DEH-P8850MPs AUI can emit a distinctive sound for each of these functions: ON, Function, and Select. This makes it easy to know what the system is doing while you safely keep your eyes on the road.

NOTE: Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Rotary Commander

DEH-P8850MP DEH-P6850MP DEH-P80RS
New CD-IB100 II [iPod Adapter]
CD-ROM Format Playable Files1) Playable Folders Playable Number of Files Available Characters ID3 Tag7) Bit Rate Multi-Session
The innovative Rotary Commanders rotary button turns smoothly at the touch of a finger, for quick, easy access among even huge volumes of files stored in AAC, MP3 or WMA format. File or command access and activation can also involve tilting that button left, right, up and down, or pressing its center. Quick and Easy Folder, File and Track Search
The Rotary Commander also offers precise control of graphic equalizer functions. Simply select and adjust an equalizer curve (Super Bass/ Powerful/Natural/Vocal/Custom1/Custom2/Flat) as you like.
iTunes AAC (Advanced Audio Coding) Playback
DEH-P8850MP DEH-P6850MP DEH-P80RS FH-P420 0MP

Equalizer Access

Pioneers DEH-P8850MP, DEH-P6850MP, FH-P4200MP and DEH-P80RS play music file formats of AAC (Advanced Audio Coding) using Apple iTunes software. With Apple iTunes , transferring your favorite songs and albums from CDs is quick and easy. Just pop a disc into your Mac or PC, and click the Import button to record to your library of tunes in MP3, AAC, or other formats at the quality level you choose.
NOTES: iTunes is a trademark of Apple Computers Inc., registered in the U.S. and other countries. AAC players can decode only those AAC files ripped and encoded using iTunes. Tilt up to increase or down to decrease equalizer curve level.
WMA/MP3 Players ISO9660 Level 1/2 Extension format (Romeo/Joliet) WMA 2), MP33), WAV4) 99 folders 65,535 files (in a disc) Maximum 645) or 326) characters Version 1/1.1/2.0 Version 2.2/2.3/2.4 WMA: 48 kbps384 kbps MP3: 8 kbps320 kbps Available

Subwoofers Speakers

Compressed Audio File Playback

Tilt up/down or turn to

Turn to display folder lists search folder. Folder Lists Next Folder Lists Tilt up/down or turn to search folder. File Lists Tilt up/down or turn to search file. A single CD-R/RW disc Tilt left or right to select an equalizer curve. From standard issue CDs iTunes (Ver. 4.8) Copying files
1) FH-P9200MP: WMA and MP3 files 2) Version 7/7.1/8/9 (2-ch. Audio)/10/Variable Bit Rate 3) Includes RIFFWAVE and RIFFMP3 format 4) Linear PCM, MS ADPCM 5) ID3 Tag Version 2: DEH-P8850MP/DEH-P6850MP/DEH-P5850MPH/DEH-P4850MPH/DEH-3850MPH/ DEH-2850MP/DEH-P80RS/FH-P5000MP/FH-P4200MP 6) ID3 Tag Version 1: FH-P9200MP 7) Character information only

WAV File Playback

DEH-P8850MP DEH-2850MP DEH-P6850MP DEH-P80RS DEH-P5850MPH FH-P500 0MP DEH-P4850MPH FH-P420 0MP DEH-3850MPH

Tilt right

to display contents of selected folder.

Bass Boost (fc = 100 Hz)

WAV file playback BMX (Bitmetric Equalizer) EEQ 5-mode preset equalizer 1-mode custom preset equalizer 2-mode selectable loudness 1 RCA preout (rear)

S i n g l e - C D

P l a y e r

10.0 100.0 1000.0

Frequency [Hz]

DEH-1850

10000.0 100000.0
4 - Channel High-Power CD Receiver
A well-crafted head unit delivers a solid introduction to the world of Pioneer CD play and performance.

Direct Sub Drive

DEH-P6850MP DEH-P5850MPH DEH-P4850MPH DEH-3850MPH
Combine the MOSFET 50 W 4 power amp and EEQ technology to get Direct Sub Drive, another unique Pioneer technology. It enables you to amplify your front speakers by 50 W 2 and add a 70 W amplified
filtered subwoofer (in 2 ohm mode) in the rear to enjoy outstanding full-power bass without an extra amplifier. Its an easy solution for lovers of booming bass.
BMX (Bitmetric Equalizer)
Audio compression formats such as MP3 and WMA tend to lose highfrequency sound levels, especially in passages when recorded signal input is weak. Pioneers BMX (Bitmetric Equalizer) compensates for this by boosting playback of upper frequency sound, to the benefit of overall musical balance.
BMX1: Recommended for enhancing brightness and depth of sound and sense of ambient space. BMX2: Recommended for even richer sound (more volume in the low and middle range) than BMX1 offers.
SUPERTUNER IIID 1 RCA EEQ DIN-D
EEQ 5-mode preset equalizer 1-mode custom preset equalizer 2-mode selectable loudness 1 RCA preout (rear)

2- D I N

M u l t i - C D

FH-P9200MP

4 - Channel High-Power WMA/MP3/CD/MD Receiver
Dot-matrix OEL (Organic EL) display iPod adapter ready Built-in DSP EEQ 5-mode preset equalizer 2-mode custom preset equalizer Auto EQ 4-mode digital SFC BBE digital sound processing Digital listening position selector Auto time alignment Digital 13-band graphic equalizer 2-way crossover: HPF/LPF 3-way digital network ASL (Auto Sound Levelizer) MDLP with ATRAC 3 Auto-slide face Pop-up rotary volume 3 RCA preouts (front + rear + subwoofer) Level indicator Spectrum analyzer

CDX-P1280 CDX-P680

IP-Bus 12-Disc Multi- CD Player
FM-Modulated 12-Disc Multi- CD Player

CDX-FM1287 CDX-FM687

Single-CD Player
IP-Bus 6 -Disc Multi- CD Player
FM-Modulated 6 -Disc Multi- CD Player

Microphone for Auto EQ

CDX-FM1287

Display with control key

DEH-P8850MP DEH-2850MP FH-P500 0MP DEH-P6850MP DEH-1850 FH-P420 0MP DEH-P5850MPH DEH-P80RS KEH-PDEH-P4850MPH DEQ-P90 DEH-3850MPH FH-P9200MP
CD CONTROL BUILT-IN DSP CD TEXT

DOLBY B NR EEQ 2-DIN

SUPERTUNER IIID DIGITAL-SFC
1 RCA selectable BBE DIGITAL
dimensions/combinations exactly as you like. This mode can memorize adjusted preset curves by 3-band parametric equalizer* settings for each source.
*Bass/mid/treble equalizer for DEH-2850MP and DEH-1850.
3-Way Network Mode/Standard Mode

DEH-P80RS FH-P9200MP

You can switch among five preset equalization curves* (Super Bass/ Powerful/Natural/Vocal/Flat) simply by pushing an EQ button. Each of these settings boosts bass and high-frequency ranges in ways that suit the music best.
*Dynamic/Powerful/Natural/Vocal/Flat in the DEH-2850MP and DEH-1850.
2-Way Crossover (HPF/LPF)
DEH-P8850MP DEH-P80RS DEH-P6850MP FH-P9200MP DEH-P5850MPH FH-P500 0MP DEH-P4850MPH FH-P420 0MP DEH-3850MPH
Systems linking a DEH-P80RS or FH-P9200MP head unit with external amplifiers gain the versatility to operate in either of two modes: Standard mode, with preouts driving front, rear and subwoofer channels, and 2- or 3-way speakers typically at front and rear; or Network mode, using low-, mid- and high-frequency (rather than front, rear and subwoofer)
channels. Cut-off frequency, filter slope, level and phase is adjustable for each channel, so output from component woofers and tweeters can be tailored to optimize acoustic staging and overall sound performance. Network modes integration of Auto Time Alignment for the DEH-P80RS particularly adds to the flexibility of tuning and other operating controls.
2-Mode Custom Preset Equalizer
DEH-P8850MP FH-P420 0MP DEH-P6850MP DEH-P80RS FH-P9200MP FH-P500 0MP
Our most feature-loaded models allow extra EEQ flexibility with selectable HPF (High Pass Filter) and LPF (Low Pass Filter). Head units of these systems can perform as amplifiers or separate crossover units for easier system control, particularly of low-frequency signals.
3-Mode Selectable Loudness
DEH-P6850MP DEH-P5850MPH DEH-P4850MPH DEH-3850MPH KEH-P4025
Built-in 50 W 4 -Channel High-Power MOSFET Amplifier
DEH-P8850MP DEH-2850MP FH-P420 0MP DEH-P6850MP DEH-1850 KEH-PDEH-P5850MPH DEH-P80RS DEH-P4850MPH FH-P9200MP DEH-3850MPH FH-P500 0MP
To minimize voltage loss in its head unit amplifiers, Pioneer built in high-performance Power MOSFET integrated circuitry that processes signals efficiently at 50 W 4 maximum total output. High-speed MOSFET switching reduces distortion to virtually nothing at high frequency ranges, thanks to superior characteristics of linearity
that smooth the signal transmission path from input to output. Pioneers independent routing of input and output current is essential to obliterating distortion. High power of 50 W per channel and characteristics of the bonding wire ensure excellent sound quality. The 99.99% pure OFC (oxygen-free copper) bonding wire has low electrical resistance, so minimal electric power is lost as heat in the IC chip, enhancing power Power MOSFET handling efficiency as well as sound quality. high-power IC chip

Low load impedance capability (28 ohm) RCA input terminals Large screw-type power/ground terminals PWM regulated power supply with MOSFET switching High-performance balanced isolator circuit High-efficiency MOSFET output section Aluminum die-cast heatsink

Class-D Amplifiers

PRS-D0M GM-D510M PRS-D5000SPL PRS-D3000SPL
Class-D amplifiers overcome the inefficiencies of traditional Class-A or AB amplifiers. Pioneers Class-D amps transform very little power into heat while a very high percentage of the power supply (67%) is transformed into the load. This results in a very compact amp which needs little input power to produce very high output power.

Current vs. Power

400 500
This is why Pioneers Class-D amps heatsink can be kept very small, and a stable load can be pumped into your subs and speakers to create a maximum of undistorted, clear sound.
High current Front or rear speaker Analog Amps The high amplifier power required to drive a subwoofer causes unstable current and voltage, which not only goes to the subwoofer but also to the front and rear speakers. As a result, the sound quality is affected and distorted.

Class-AB Class-D

Power output (Watt 4 ) Low current
Subwoofer Front or rear speaker A Class-D amplifier needs only 2/3 of the current of a conventional amplifier, so the power supply to both subwoofer and front and rear speakers is more stable. As a result, the sound quality will not be affected, so you can enjoy a very clean sound output without distortion.
RCA inputs and outputs (GM-6200F)
Oversized power ground terminals (GM-6200F)
PRS-D0SPL GM-520 0T PRS-D3000SPL PRS-D2000T PRS-D1000M GM-720 0M
Power is just one defining characteristic of outstanding amplification. Precision and balance are also crucial to get the sound you want. By letting
you set the optimal bass level for each speaker and subwoofer connected to a system, Bass Boost gives you more precise control over how your music sounds overall. Select between 0- to 12-dB level settings that can be adjusted in 2-dB steps, according to preference and music style.
The Class-D amplifiers PWM (Pulse Width Modulator) modulates the original audio input signal with another signal which has a much higher fixed frequency. The result is a digital signal which contains the input signal and a band of frequency components around the modulation frequency. A LPF (Low Pass Filter) will then filter out the 350 kHz frequency pulses and the resulting amplified output signal is then sent to the subwoofer and/or speakers. The advantage of this amplification is that the power output FETs operate like a switch that is on or off: when on, the FET acts like a closed switch, no voltage runs through its terminals, and no wasted power is transformed into heat.

wire which effectively doubles a subwoofers capacity to handle input power and helps prevent short-circuiting caused by overheating. When pushed toward the limit, the new Adhesive layer TS-W5102SPLcontaining ceramic-coated Ceramic thermal insulation voice coil coolly pumped out earth-shaking Electrical insulation decibel levels without fail to outperform the Copper wire competition at dB Drag Racing showcases in 2005 and 2006. Extra-Strong Dust Cap with Foamed Acrylic Polymer The TS-W8102SPL and TS-W5102SPL subwoofers dust caps are far stronger than and practically as light as conventional ones, thanks to foamed acrylic polymer sandwiched between layers of carbon-fiber and glass cloth. This foamed acrylic polymer core is extremely durable and heat-resistant, with up to about 36 times as much compressive strength as carbon-fiber blended paper, among more conventional foam materials. Pioneer puts this material to maximum advantage in this subwoofer to accommodate higher sound pressure levels for greater stability and power in bass reproduction.
Carbon cloth Foamed acrylic polymer

m 10 m

The TS-W8102SPL, TS-W5102SPL, TS-W3004SPL and TS-W2504SPL incorporate a patent-pending Woven Aramid Fiber Radial Surround which improves power handling and reduces distortion. Similar to a radial tire, the surround is constructed of three layerstwo consisting of rubber and one of interwoven aramid fiber. The aramid fiber layer is designed Benefits of Woven Aramid Fiber Radial Surround
Improved power handling capability Reduced distortion (anti-puckering design) Improved linear excursion Louder, more accurate bass
with a honeycomb weave, which evenly distributes strength throughout the surround material, eliminating any weak points of surround and improving high-power capability. The result is an extremely durable and resilient surround that resists puckering (distortion often produced under extreme power conditions).
The three layers are formed under a high-pressure, high-temperature process. The result: an extremely durable and high-performance surround.
Bottom Hold Design Aluminum Die-Cast One-Piece Chassis
TS- C171PRS TS-W3004SPL TS- C131PRS TS-W2504SPL TS-W8102SPL TS-W5102SPL
Vibration Attenuation (Damping) Comparison

Impulse response

40.Avg 0% Ovlp Hann

TS-W306C Subwoofer with optional UD-G306 Spoke Grille
Double-cone structure with airsuspension control system Reinforced cone using C-shaped nodes structure Composite IMPP double cone woofer using interlaced carbon and ultra long glass fiber 3-layer fiber woven radial surround with M-shape cross-section 4-layer, long voice coil Glass cloth voice coil bobbin
High-energy strontium magnet Aluminum dust cap T-pole yoke design Extended and vented pole yoke Rubber gasket Cast aluminum basket with fin-shaped design 250 watts nominal power handling 201,000 Hz, 87 dB, 9.919.8 l (0.350.7 cu. ft.), 282.0 89.6 mm

TS-W256C

25-cm (10") Component Subwoofer (Sealed Enclosure Type)

TS-W256DVC

800 W MAX.
25-cm (10") Component Subwoofer (Dual Voice Coil Type)

TS-SW841D

500 W MAX.
20 -cm (8" ) Component Subwoofer
Double-cone structure with airsuspension control system Reinforced cone using C-shaped nodes structure Composite IMPP double cone woofer using interlaced carbon and ultra long glass fiber 3-layer fiber woven radial surround with M-shape cross-section 4-layer, long voice coil Glass cloth voice coil bobbin High-energy strontium magnet Aluminum dust cap T-pole yoke design Extended and vented pole yoke Rubber gasket Cast aluminum basket with fin-shaped design 120 watts nominal power handling 301,500 Hz, 85 dB, 4.214.2 l (0.150.5 cu. ft.), 218.4 75.2 mm
Composite IMPP cone using interlaced aramid fiber 3-layer, fiber woven radial surround Single conex damper with damper ring 4-layer, long voice coil (TS-W256C) Dual 4-layer, long voice coils (DVC) () (TS-W256DVC) 12-slit, 48-mm (2") aluminum voice coil bobbin
Dual mass high-power magnet (2.1 kg, 74 oz.) Extended and vented pole yoke Silver binding posts Spoke grille compatible (UD-G256) 350 watts nominal power handling 18600 Hz, 87 dB, 18.435.4 l (0.651.25 cu. ft.), mm

Subwoofer Enclosures

To have tighter control of bass power, an enclosure system is the perfect solution. Enclosure subwoofers are designed for use in a custom-designed sealed, vented or bandpass enclosure, the size of which is determined by specialized software. The bass response is tight, accurate, controlled and consistent, since its not affected by the volume of objects in the car boot. You can put together high-performance systems featuring superb low-frequency reproduction.

SEALED ENCLOSURES

Shallow-Type Subwoofers
TS-SW1241D TS-SW1041D TS-SW841D
With enhanced maximum power and handling shallow dimensions, TS-SW subwoofers are more versatile than ever. The Full (30 cm) and Regular (25 cm) sizes can be installed behind and under seats, and the Compact (20 cm) size can even be mounted on rear sidewalls and trays of smaller cars.

Full-size 30 cm (12") Regular 25 cm (10") Compact 20 cm (8") SUV Sedan Compact vehicles Standard-size pickup trucks etc Full-size pickup trucks etc
Behind seats Rear sidewall Under seats Rear tray
of this air varies as the cones move back and forth, resulting in smoother, more precise linearity. The trapped air behaves like a spring, eliminating the need for a conventional spider structure, so the unit can be made shallow enough to fit in a tight space. Inside the enclosure, a drive cone deflects air pressure and a fin-shaped basket smoothly directs air sideways. This makes bass output remarkably stable, despite these units compact size. The system also enhances durability, as the subwoofers are subjected to smaller frequency changes (and less wear and tear) than conventional subwoofers.

TS-SW1241D Cross Section

Composite IMPP double cone using interlaced carbon and ultra long glass fiber 4-layer long voice coil
From a purely musical standpoint, the sealed enclosure type is as popular as ever. This box type is capable of handling large amounts of power and, in turn, fairly high SPL levels in car. Size always plays a key role in application and the sealed enclosure
variety is excellent for small box applications. Power, however, is required to achieve above average SPL levels. From a purely engineering standpoint, the sealed box lends a simpler is better approach to subwoofer application.
Larger Recommended Smaller
VENTED ENCLOSURES (BASS REFLEX)
The vented enclosure variant is a balance between several factors. Most notable about vented boxes is the increase in box volume over the sealed variation. Because the vent is considered to be a secondary output source, the deeper bass frequencies can be extended. While the distortion level above the tuning frequency is quite low, things can get pretty dirty if the enclosure is forced to play below this area. Efficiency and easily obtained lower frequencies would be the biggest benefits of this design. From a purely engineering standpoint, three key elements have to be in sync in order for the enclosure to work at its targeted areabox + speaker + vent. While more complex than the sealed variation, the vented enclosure has been a very popular approach to car audio low-frequency reproduction.
Aluminum dust cap C-shaped nodes*
Air-Suspension Control System Thanks to Pioneers unique Air-Suspension Control System, TS-SW subwoofers offer deep, rich bass in a shallow, compact form. Air is trapped within the composite IMPP TM double cone, between the main cone and the drive cone behind it. The pressure
4TH-ORDER BAND PASS ENCLOSURES
Frequency Changes Before and After Reliability Test Hz Hz 28 Hz 25

See page 17 for details about this product.
See page 17 for details about this products.
TS-C1625 Tweeter Specifications Dimensions (W H D): 41 mm (surface mount) Cut-out dimensions: 41 mm
Mounting depth: 20 mm *See page 35 for woofer dimensions.

TS-C1602

Rear view Rear view
16-cm Packaged Component Speaker System
150 W MAX. HR 16-cm woofer/13-mm tweeter 2-way surface mounting capabilities (tweeter) 50 watts nominal power handling 3025,000 Hz, 90 dB, mm Common Features HR (Hydro-Resistant) cone woofer/midrange PEI (poly-ether imide) dome tweeter with magnetic fluid

TS-C1002

150 W MAX.
10-cm Packaged Component Speaker System
HR 10-cm midrange/13-mm tweeter 50 watts nominal power handling 6025,000 Hz, 90 dB, mm In-line passive crossover included (HPF, 12 dB/oct.) Aluminum short ring Flush and surface mounting capabilities (tweeter)
TS-C1602 TS-C1602/TS-C1002 Tweeter Specifications Dimensions (W H D): mm Cut-out dimensions: 37 mm *See page 35 for woofer dimensions.
Packaged Component Speaker Systems TS-C160R

250 W MAX.

Component Tweeters TS-S250
VCCS 60 watts nominal power handling 2532,000 Hz, 90 dB, 171 83.5 mm
40-mm High-Power Tune-Up Tweeter

TS-S20

20-mm Component Hard-Dome Tweeter
16 -cm Packaged Component Speaker System
16-cm woofer/25-mm soft-dome tweeter CCAW heat-resistant long voice coil Die-cast aluminum full-depth basket for rich bass response with removable GM tabs
40-mm ceramic horn tweeter design High-power handling of 250 W max. High sensitivity: 97 dB/W Built-in 6 dB/oct. capacitor
Large Pioneer logo on side surface 50 watts nominal power handling 6,00040,000 Hz, 97 dB, mm
20-mm amorphous-titanium-coated PPS (polyphenylene sulfide)dome tweeter High-performance strontium magnet Built-in LC network: attached at end of speaker cable 50 watts nominal power handling 3,000 (with network)/1,200 (without network)26,000 Hz, 92 dB, 85.5 73.5 32.8 mm

TS-C130R

TS-C160R
180 W MAX. VCCS Die-cast aluminum basket 40 watts nominal power handling 3532,000 Hz, 90 dB, 155 77.3 mm

2 A

2 A

3

B/M/T B/M/T

C P P P

E E 2 E

E 2 20

Head Units Specifications
WMA/MP3 Players DEH-P8850MP CD PLAYER Frequency response [1 dB] S/N ratio [1 kHz, IEC-A Network] Dynamic range [1 kHz] TUNER Frequency range FM AM [10 kHz] [9 kHz] FM usable sensitivity [75 , mono, S/N: 30 dB] FM stereo separation [65 dBf, 1 kHz] AM usable sensitivity [S/N: 20 dB] COMPONENT ADD-ON DSP UNIT Equalization frequency Equalization range Distortion [1 kHz, 500 mV, 20 KLPF] Frequency response [1 dB] S/N ratio [IEC-A network] Output impedance Max. output level AUDIO Max. power output GENERAL Dimensions [W H D] DINChassis Nose DChassis Nose Hz dB dB MHz kHz kHz dBf dB V Hz dB % Hz dB 520,95 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 mm mm mm mm DEH-P6850MP 520,92 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 DEH-P5850MPH DEH-P4850MPH 520,92 87.5 108.0 5301,640 5311,[0.7 V] 50 W 4 520,92 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 DEH-3850MPH 520,92 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 DEH-2850MP 520,92 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 Single-CD Players DEH-1850 520,92 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 Component Single-CD Players RS-D7R 520,000 87.5108.0 5301,640 5311,[0.8 V] DEX-P90RS 520,98 87.5108.0 5311,[0.8 V] DEH-P80RS 520,100 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 Component Add-on DSP Unit DEQ-P90 2020,0.005 1020,1k 4.0 V/1 kHz, 1% dist.
2-DIN Players FH-P9200MP CD PLAYER Frequency response [1 dB] Hz S/N ratio [1 kHz, IEC-A network] dB Dynamic range [1 kHz] dB MD PLAYER Frequency response [1 dB] Hz S/N ratio [1 kHz, IEC-A network] dB Dynamic range [1 kHz] dB CASSETTE PLAYER Wow & flutter [WRMS] % Tape frequency response [3 dB] Hz Tape S/N ratio [IEC-A network] dB TUNER Frequency range FM MHz AM [10 kHz] kHz [9 kHz] kHz FM usable sensitivity [75 , mono, S/N: 30 dB] dBf FM stereo separation [65 dBf, 1 kHz] dB AM usable sensitivity [S/N: 20 dB] V AUDIO Max. power output GENERAL Dimensions [W H D] DINChassis mm Nose mm DChassis mm Nose mm

*Chassis dimensions only

Multi-CD Players FH-P4200MP 520,92 CDX-P1280 520,90 170* CDX-P680 520,90 168* CDX-FM1287 170* CDX-FM687 168*
Cassette Players KEH-P4025 0.09 3016,87.5108.0 5301,640 5311,[0.8 V] 50 W 15 KEH-P2035 0.13 3016,000 52

FH-P5000MP 520,92

520,92 2020,90 87.5108.0 5301,640 5311,[0.7 V] 50 W 4 94 17

Mounting Depth

G = Gold-plated
Power Amplifier Specifications
Max. power output [14.4 V] 4-channel mode 2-channel mode 1-channel mode 4-channel mode 2-channel mode 1-channel mode GM-7200M GM-6200F GM-5200T GM-3200T GM-D510M RS-A9 RS-A7 PRS-D4000F PRS-D2000T PRS-D1000M PRS-D5000SPL 120 W 4 (4) 100 W 4 (4) 100 W 4 (4) 150 W 4 (4) 300 W 2 (4) 250 W 2 (4) 120 W 2 (4) 300 W 2 (4) 300 W 2 (4) 600 W 2 (4) 300 W 2 (4) 500 W 1 (4) 760 W 1 (4) 300 W 1 (4) 600 W 1 (4) 1,200 W 1 (4) 800 W 1 (4) 1,500 W 1 (4) 800 W 1 (2) 1,000 W 1 (2) 1,200 W 1 (2) 3,000 W 1 (2) 1,200 W 1 (1) 60 W 4 (4) 50 W 4 (4) 50 W 4 (4) 75 W 4 (4) 75 W 4 (2) 75 W 4 (2) 75 W 4 (2) 150 W 4 (2) 150 W 2 (4) 125 W 2 (4) 60 W 2 (4) 150 W 2 (4) 150 W 2 (4) 300 W 2 (4) 150 W 2 (4) 190 W 2 (2) 75 W 2 (2) 300 W 2 (2) 250 W 1 (4) 380 W 1 (4) 150 W 1 (4) 300 W 1 (4) 600 W 1 (4) 400 W 1 (4) 750 W 1 (4) 360 W 1 (2) 500 W 1 (2) 600 W 1 (2) 1,500 W 1 (2) 150 W 1 (4)* 300 W 1 (2)* 600 W 1 (1)* 1050,000 1050,000 1050,000 10100,000 10100,000 1040,000 1040, 5240 (mono) 0.03 0.01 0.015 0.008 0.03 0.002 0.002 0.005 0.005 0.5 0.330 PRS-D3000SPL PRS-A700 PRS-AW 4 (4) 300 W 2 (4) 200 W 2 (4) 1,000 W 1 (4) 600 W 1 (4) 2,000 W 1 (2) 50 W 4 (4) 75 W 4 (2) 150 W 2 (4) 100 W 2 (4) 150 W 2 (2) 500 W 1 (4) 300 W 1 (4) 1,000 W 1 (2)
+0 dB, 1 dB Hz +0 dB, 3 dB Hz +0.5 dB, 3 dB Hz Total harmonic distortion % S/N ratio [IEC-A network] dB Dimensions (W H D) mm

*Hi-current mode

Frequency response
10240 1080,000 1080,000 0.05 0.003 0.330
TS-T110 TS-T15 TS-CX7 TS-STX99 TS-MR2040 TS-MR1640
22 mm 20 mm 5.7 cm 5.7 cm 20 cm 16 cm
120 W 120 W 60 W 80 W 200 W 160 W
40 W 40 W 20 W 20 W 40 W 30 W
90 dB 90 dB 83 dB 83 dB 92 dB 91 dB
47.1 20.5 mm 37.5 18.9 mm 41 mm 114 mm mm 175 84.5 mm

75 mm 56 mm

186 mm 130 mm

85.5 73.5 32.8 mm

Continuous power output [14.4 V]
TS-T01RS 3.5 cm TS-W12PRS 30 cm TS-M171PRS 17 cm TS-S101PRS 10 cm TS-T031PRS 28 mm TS-C171PRS 17 cm TS-C131PRS 13 cm TS-W8102SPL 38 cm TS-W5102SPL 30 cm TS-W3004SPL 30 cm TS-W2504SPL 25 cm TS-W301R 30 cm TS-W251R 25 cm TS-SW1241D 30 cm TS-SW1041D 25 cm TS-SW841D 20 cm TS-W306C/DVC 30 cm TS-W256C/DVC 25 cm TS-W305F 30 cm TS-W255F 25 cm cm TS-WX11A TS-WX22A 20 cm TS-WX206A 20 cm TS-WX20LPA 20 cm TS-D691S 6" 9" TS-D161S 16 cm TS-E6996 6" 9" TS-Ecm TS-Ecm TS-Ecm TS-Ecm TS-Ecm TS-A6991S 6" 9" TS-A6981S 6" 9" TS-A6971E 6" 9" TS-A6961E 6" 9" TS-Acm TS-Acm TS-A1681S 16 cm TS-A1671S 16 cm TS-A4670R 4" 6" TS-6975 6" 9" TS-cm TS-G1641R 16 cm TS-G1611R 16 cm TS-G1341R 13 cm TS-G1311R 13 cm TS-G1041R 10 cm TS-G1011R 10 cm TS-G4641R 4" 6" TS-C160R 16 cm TS-C130R 13 cm TS-Ccm TS-Ccm TS-Ccm TS-Ccm TS-Ccm TS-Smm