! Keep this manual handy as a reference for operating procedures and precautions. ! Always keep the volume low enough so you can hear sounds outside of the car. ! Protect this unit from moisture. ! If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. ! If this unit does not operate properly, contact your dealer or nearest authorized Pioneer Service Station.
! Use only one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not used for a month or longer. ! Do not recharge, disassemble, heat or dispose of the battery in fire. ! Do not handle the battery with metallic tools. ! Do not store the battery with metallic materials. ! In the event of battery leakage, wipe the remote control completely clean and install a new battery. ! When disposing of used batteries, please comply with governmental regulations or environmental public institutions rules that apply in your country/area.

CAUTION

Using the remote control
Point the remote control in the direction of the front panel to operate.

Important

! Do not store the remote control in high temperatures or direct sunlight. ! The remote control may not function properly in direct sunlight. ! Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal.
3 Put the front panel into the protective case provided for safe keeping.
Attaching the front panel
Protecting your unit from theft
The front panel can be detached from the head unit and stored in the protective case provided to discourage theft. ! If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound. ! You can turn off the warning tone. See Switching the warning tone on page 27.
Important ! Never use force or grip the display and the buttons tightly when removing or attaching. ! Avoid subjecting the front panel to excessive shocks. ! Keep the front panel out of direct sunlight and high temperatures.
% Replace the front panel by holding it upright to this unit and clipping it securely into the mounting hooks.

Removing the front panel

1 Press OPEN to open the front panel. 2 Grip the left side of the front panel and pull it gently outward. Take care not to grip it tightly or to drop it.

Whats What

Head unit
1 CLOCK button Press to change to the clock display. 2 PAUSE button Press to turn pause on or off. 3 LOUDNESS button Press to turn loudness on or off. 4 OPEN button Press to open the front panel. 5 FUNCTION button Press to select functions. 6 AUDIO button Press to select various sound quality controls. 7 a/b/c/d buttons Press to do manual seek tuning, fast forward, reverse and track search controls. Also used for controlling functions. 8 BAND button Press to select among three FM and one AM bands and cancel the control mode of functions.
buttons Press for preset tuning and disc number search when using a multi-CD player. a EQ button Press to select various equalizer curves. b VOLUME When you press VOLUME, it extends outward so that it becomes easier to turn. To retract VOLUME, press it again. Rotate to increase or decrease the volume. c SOURCE button This unit is turned on by selecting a source. Press to cycle through all of the available sources. d DISPLAY button Press to select different displays.

Remote control

Operation is the same as when using the button on the head unit. See the explanation of the head unit about the operation of each button with the exception of ATT, which is explained below.

g 6 f 7

e CD button Press to select the built-in or multi-CD player as the source. f TUNER button Press to select the tuner as the source. g ATT button Press to quickly lower the volume level, by about 90%. Press once more to return to the original volume level. h VOLUME button Press to increase or decrease the volume.

Power ON/OFF

Turning the unit on
% Press SOURCE to turn the unit on. When you select a source the unit is turned on.

Selecting a source

You can select a source you want to listen to. To switch to the built-in CD player, load a disc in this unit (refer to page 12). % When using the head unit, press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources: Built-in CD playerTelevisionTuner Multi-CD playerExternal unit 1External unit 2AUX % When using the remote control, press TUNER or CD to select a source. Press each button repeatedly to switch between the following sources: TUNER: TelevisionTunerSources off CD: Built-in CD playerMulti-CD player Sources off

Notes ! In the following cases, the sound source will not change: When a unit corresponding to each source is not connected to this unit. When no disc is set in this unit. When no magazine is set in the multi-CD player. When the AUX (auxiliary input) is set to off (refer to page 27). ! External unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two exter-
nal units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by this unit. ! When this units blue/white lead is connected to the cars auto-antenna relay control terminal, the cars antenna extends when this units source is turned on. To retract the antenna, turn the source off.

Turning the unit off

% Press SOURCE and hold until the unit turns off.

Listening to the radio

4 To perform manual tuning, press c or d with quick presses. The frequencies move up or down step by step. 5 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page.
Important If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 27).
# You can cancel seek tuning by pressing either c or d with a quick press. # If you press and hold c or d you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons. Note When the frequency selected is being broadcast in stereo the stereo (5) indicator will light.
1 Band indicator Shows which band the radio is tuned to, AM or FM. 2 Frequency indicator Shows to which frequency the tuner is tuned. 3 Stereo (5) indicator Shows that the frequency selected is being broadcast in stereo. 4 Preset number indicator Shows what preset has been selected. 1 Press SOURCE to select the tuner. Press SOURCE until tuner is selected as the source. 2 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 3 Press BAND to select a band. Press BAND until the desired band is displayed, F1, F2, F3 for FM or AM.
Introduction of advanced tuner operation
1 Function display Shows the function status.
% When you find a frequency that you want to store in memory press a preset tuning button 16 and hold until the preset number stops flashing. The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same preset tuning button 16 the radio station frequency is recalled from memory.
Notes ! Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory. ! You can also use a and b to recall radio station frequencies assigned to preset tuning buttons 16.

2 LOC indicator Shows when local seek tuning is on. 3 Preset number indicator Shows what preset has been selected. % Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: BSM (best stations memory)LOCAL (local seek tuning)
# To return to the frequency display, press BAND. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press FUNCTION to select LOCAL. Press FUNCTION until LOCAL appears in the display. 2 Press a to turn local seek tuning on. Local seek sensitivity (e.g., LOCAL 2) appears in the display. 3 Press c or d to set the sensitivity. There are four levels of sensitivity for FM and two levels for AM: FM: LOCAL 1LOCAL 2LOCAL 3 LOCAL 4 AM: LOCAL 1LOCAL 2
Storing and recalling broadcast frequencies
If you press any of the preset tuning buttons 16 you can easily store up to six broadcast frequencies for later recall with the touch of a button.
The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. 4 When you want to return to normal seek tuning, press b to turn local seek tuning off. LOCAL:OFF appears in the display.
Storing the strongest broadcast frequencies
BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 16 and once stored there you can tune in to those frequencies with the touch of a button. 1 Press FUNCTION to select BSM. Press FUNCTION until BSM appears in the display. 2 Press a to turn BSM on. BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under preset tuning buttons 16 in order of their signal strength. When finished, BSM stops flashing.
# To cancel the storage process, press b. Note
Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 16.

Built-in CD Player

Playing a CD
4 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 5 To perform fast forward or reverse, press and hold c or d. 6 To skip back or forward to another track, press c or d. Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track.
Notes ! The built-in CD player plays one, standard, 12cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs. ! Do not insert anything other than a CD into the CD loading slot. ! If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting the disc again. ! If the built-in CD player does not operate properly, an error message such as ERROR-11 may be displayed. Refer to Understanding built-in CD player error messages on page 29. ! The built-in CD player is not equipped with CD TEXT function. ! A CD TEXT disc is a CD featuring recorded text information such as disc title, artist name and track title.
These are the basic steps necessary to play a CD with your built-in CD player. More advanced CD operation is explained starting on the next page. 1 Play time indicator Shows the elapsed playing time of the current track. 2 Track number indicator Shows the track currently playing. 1 Press OPEN to open the front panel. CD loading slot appears.
# After a CD has been inserted, press SOURCE to select the built-in CD player.
2 Insert a CD into the CD loading slot. Playback will automatically start.

CD loading slot

EJECT button
# You can eject a CD by pressing EJECT. # To avoid a malfunction, make sure that no metal object comes into contact with the terminals when the front panel is open.

Close the front panel.

Introduction of advanced built-in CD player operation
3 Press b to turn repeat play off. RPT :OFF appears in the display. The track currently playing will continue to play and then play the next track.

Pause lets you temporarily stop playback of the CD. 1 Press FUNCTION to select PAUSE. Press FUNCTION until PAUSE appears in the display. 2 Press a to turn pause on. PAUSE:ON appears in the display. Play of the current track pauses. 3 Press b to turn pause off. PAUSE:OFF appears in the display. Play will resume at the same point that you turned pause on.
Note You can also turn pause on or off by pressing PAUSE.
4 Press d to move the cursor to the next character position. When the letter you want is displayed, press d to move the cursor to the next position and then select the next letter. Press c to move backwards in the display. 5 Move the cursor to the last position by pressing d after entering the title. When you press d one more time, the entered title is stored in memory. 6 Press BAND to return to the playback display.
Notes ! Titles remain in memory, even after the disc has been removed from this unit, and are recalled when the disc is reinserted.
Using disc title functions
You can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD will be displayed.
! After data for 48 discs has been stored in memory, data for a new disc will overwrite the oldest one. ! If you connect a multi-CD player, you can input disc titles for up to 100 discs.

Displaying disc titles

You can display the title of any disc that has had a disc title entered. % Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: Play timeDISC TTL (disc title) When you select DISC TTL, the title of the currently playing disc is shown in the display.
# If no title has been entered for the currently playing disc, NO TITLE is displayed.

Multi-CD Player

4 To perform fast forward or reverse, press and hold c or d. 5 To skip back or forward to another track, press c or d. Pressing d skips to the start of the next track. Pressing c once skips to the start of the current track. Pressing again will skip to the previous track.
Notes ! When the multi-CD player performs the preparatory operations, READY is displayed. ! If the multi-CD player does not operate properly, an error message such as ERROR-11 may be displayed. Refer to the multi-CD player owners manual. ! If there are no discs in the multi-CD player magazine, NO DISC is displayed.

You can use this unit to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page. 1 Disc number indicator Shows the disc currently playing. 2 Play time indicator Shows the elapsed playing time of the current track. 3 Track number indicator Shows the track currently playing. 1 Press SOURCE to select the multi-CD player. Press SOURCE until multi-CD is selected as the source. 2 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 3 Select a disc you want to listen to with the 16 buttons. For discs located at 1 to 6, press the corresponding number button. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display.
# You can also sequentially select a disc by pressing a/b.

50-disc multi-CD player

Only those functions described in this manual are supported for 50-disc multi-CD players.
Introduction of advanced multi-CD player operation
2 Press c or d to select the repeat range. Press c or d until the desired repeat range appears in the display.
! MCD Repeat all discs in the multi-CD player ! TRK Repeat just the current track ! DSC Repeat the current disc Notes
1 RPT indicator Shows when repeat range is selected to current track. 2 Function display Shows the function status. % Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: RPT (repeat play)RDM (random play) SCAN (scan play)ITS-P (ITS play)PAUSE (pause)COMP (compression and DBE)
! If you select other discs during repeat play, the repeat play range changes to MCD. ! If you perform track search or fast forward/reverse during TRK, the repeat play range changes to DSC.
Random play lets you play back tracks in a random order within the repeat range, MCD and DSC. 1 Select the repeat range. Refer to Repeating play on this page. 2 Press FUNCTION to select RDM. Press FUNCTION until RDM appears in the display. 3 Press a to turn random play on. RDM :ON appears in the display. Tracks will play in a random order within the previously selected MCD or DSC ranges. 4 Press b to turn random play off. RDM :OFF appears in the display. Tracks will continue to play in order.

There are three repeat play ranges for the multi-CD player: MCD (multi-CD player repeat), TRK (one-track repeat) and DSC (disc repeat). 1 Press FUNCTION to select RPT. Press FUNCTION until RPT appears in the display.
Note If you turn random play on during DSC and then return to the playback display, DRDM appears in the display.

Scanning CDs and tracks

While you are using DSC, the beginning of each track on the selected disc plays for about 10 seconds. When you are using MCD, the beginning of the first track of each disc is played for about 10 seconds. 1 Select the repeat range. Refer to Repeating play on the previous page. 2 Press FUNCTION to select SCAN. Press FUNCTION until SCAN appears in the display. 3 Press a to turn scan play on. SCAN :ON appears in the display. The first 10 seconds of each track of the current disc (or the first track of each disc) is played. 4 When you find the desired track (or disc) press b to turn scan play off. SCAN :OFF appears in the display. The track (or disc) will continue to play.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selections.
# If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. Note After track or disc scanning is finished, normal playback of the tracks will begin again. If you turn scan play on during DSC and then return to the playback display, DSCAN appears in the display.
Creating a playlist with ITS programming
You can use ITS to enter and playback up to 99 tracks per disc, up to 100 discs (with the disc title). (With multi-CD players sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.) 1 Play a CD that you want to program. Press a or b to select a CD.
2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION repeatedly, the following functions appear in the display: TITLE IN (disc title input)ITS (ITS programming) 3 Select a desired track by pressing c or d. 4 Press a to store the currently playing track in the playlist. ITS IN is displayed briefly and the currently playing selection is added to your playlist. The display then shows ITS again. 5 Press BAND to return to the playback display.

Note After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.
# If no tracks in the current range are programmed for ITS play then EMPTY is displayed.
4 Press b to turn ITS play off. ITS-P:OFF appears in the display. Playback will continue in normal order from the currently playing track and CD.
Erasing a track from your ITS playlist
When you want to delete a track from your ITS playlist, you can if ITS play is on. If ITS play is already on, skip to step 2. If ITS play is not already on, press FUNCTION. 1 Play a CD you want to delete a track from your ITS playlist, and turn ITS play on. Refer to Playback from your ITS playlist on this page. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION until ITS appears in the display. 3 Select a desired track by pressing c or d. 4 Press b to erase a track from your ITS playlist. The currently playing selection is erased from your ITS playlist and playback of the next track from your ITS playlist begins.
# If there are no tracks from your playlist in the current range, EMPTY is displayed and normal play resumes.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to play. 1 Select the repeat range. Refer to Repeating play on page 17. 2 Press FUNCTION to select ITS-P. Press FUNCTION until ITS-P appears in the display. 3 Press a to turn ITS play on. ITS-P:ON appears in the display. Playback begins of those tracks from your playlist within the previously selected MCD or DSC ranges.
5 Press BAND to return to the playback display.
Erasing a CD from your ITS playlist
When you want to delete all tracks of a CD from your ITS playlist, you can if ITS play is off. 1 Play a CD that you want to delete. Press a or b to select a CD. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION until ITS appears in the display. 3 Press b to erase all tracks on the currently playing CD from your ITS playlist. All tracks on the currently playing CD are erased from your playlist and ITS CLR is displayed. 4 Press BAND to return to the playback display.
TITLE IN (disc title input)ITS (ITS programming)
# When playing a CD TEXT disc on a CD TEXT compatible multi-CD player, you cannot switch to TITLE IN. The disc title will have already been recorded on a CD TEXT disc.
3 Press a or b to select a letter of the alphabet. Each press of a will display a letter of the alphabet in A B C. X Y Z and numbers in 3. 0 order. Each press of b will display a letter in the reverse order, such as Z Y X. C B A order.

Scrolling titles in the display
This unit can display the first 8 letters only of DISC TTL, ART NAME, TRK TTL and ART NAME. When the recorded information is

Audio Adjustments

Introduction of audio adjustments
Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display.

Using balance adjustment

1 CUSTOM indicator Shows when custom equalizer curve is currently selected. 2 Equalizer curve Shows which equalizer preset is currently selected. 3 FIE indicator Shows when the front image enhancer is turned on. 4 Audio display Shows the audio adjustments status. 5 LOUD indicator Appears in the display when loudness is turned on. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)EQ (equalizer) LOUD (loudness)FIE (front image enhancer)SLA (source level adjustment) You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. Press AUDIO until FAD appears in the display.
# If the balance setting has been previously adjusted, BAL will be displayed.
# FAD : 0 is the proper setting when only two speakers are used.
2 Press a or b to adjust front/rear speaker balance. Each press of a or b moves the front/rear speaker balance towards the front or the rear. FAD :F15 FAD :R15 is displayed as the front/ rear speaker balance moves from front to rear.
3 Press c or d to adjust left/right speaker balance. When you press c or d, BAL : 0 is displayed. Each press of c or d moves the left/right speaker balance towards the left or the right. BAL :L9 BAL :R9 is displayed as the left/right speaker balance moves from left to right.
# When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the display of each source, press BAND.

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.
Recalling equalizer curves
There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:
Display SPR-BASS POWERFUL NATURAL VOCAL CUSTOM EQ FLAT Equalizer curve Super bass Powerful Natural Vocal Custom Flat

Notes ! The AM tuner volume level can also be adjusted with source level adjustments. ! The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically. ! External unit 1 and external unit 2 are set to the same source level adjustment volume automatically.

Initial Settings

Adjusting initial settings
2 Press c or d to select the segment of the clock display you wish to set. Pressing c or d will select one segment of the clock display: HourMinute As you select segments of the clock display the segment selected will blink.
Initial settings lets you perform initial set up of different settings for this unit. 1 Function display Shows the function status. 1 Press SOURCE and hold until the unit turns off. 2 Press FUNCTION and hold until the clock appears in the display. 3 Press FUNCTION to select one of the initial settings. Press FUNCTION repeatedly to switch between the following settings: ClockFM (FM tuning step)AM (AM tuning step)WARN (warning tone)AUX (auxiliary input) Use the following instructions to operate each particular setting.
# To cancel initial settings, press BAND. # You can also cancel initial settings by holding down FUNCTION until the unit turns off.
3 Press a or b to set the clock. Pressing a will increase the selected hour or minute. Pressing b will decrease the selected hour or minute.
Setting the FM tuning step
The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. 1 Press FUNCTION to select FM. Press FUNCTION repeatedly until FM appears in the display. 2 Press c or d to select the FM tuning step. Pressing c or d will switch the FM tuning step between 100 kHz and 50 kHz. The selected FM tuning step will appear in the display.
Note If seek tuning is performed in 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again.

Setting the clock

Use these instructions to set the clock. 1 Press FUNCTION to select clock. Press FUNCTION repeatedly until clock appears in the display.
Setting the AM tuning step
The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 1,602 kHz allowable) to 10 kHz (530 1,640 kHz allowable). 1 Press FUNCTION to select AM. Press FUNCTION repeatedly until AM appears in the display. 2 Press c or d to select the AM tuning step. Pressing c or d will switch the AM tuning step between 9 kHz and 10 kHz. The selected AM tuning step will appear in the display.
1 Press FUNCTION to select AUX. Press FUNCTION repeatedly until AUX appears in the display. 2 Press a or b to turn AUX on or off. Pressing a or b will turn AUX on or off and that status will be displayed (e.g., AUX :ON).

! When CD-R/CD-RW discs are used, playback is possible only for discs which have been finalized. ! It may not be possible to play back CD-R/ CD-RW discs recorded on a music CD recorder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc. on the lens of this unit. ! Playback of discs recorded on a personal computer may not be possible depending on the application settings and the environment. Please record with the correct format. (For details, contact the manufacturer of the application.) ! Playback of CD-R/CD-RW discs may become impossible in case of direct exposure to sunlight, high temperatures, or the storage conditions in the car. ! Titles and other text information recorded on a CD-R/CD-RW disc may not be displayed by this unit. ! This unit conforms to the track skip function of the CD-R/CD-RW disc. The tracks containing the track skip information are skipped automatically. ! If you insert a CD-RW disc into this unit, time to playback will be longer than when you insert a conventional CD or CD-R disc. ! Read the precautions with CD-R/CD-RW discs before using them.

Specifications

General
Rated power source.. 14.4 V DC (allowable voltage range: 12.0 14.4 V DC) Grounding system. Negative type Max. current consumption... 10.0 A Dimensions (W H D): DIN Chassis. 157 mm Nose.. 19 mm D Chassis. 162 mm Nose.. 14 mm Weight.. 1.4 kg
System.. Compact disc audio system Usable discs.. Compact disc Signal format: Sampling frequency.. 44.1 kHz Number of quantization bits.. 16; linear Frequency characteristics. 5 20,000 Hz (1 dB) Signal-to-noise ratio.. 94 dB (1 kHz) (IEC-A network) Dynamic range.. 92 dB (1 kHz) Number of channels. 2 (stereo)

CD player

Continuous power output is 22 W per channel minimum into 4 ohms, both channels driven 50 to 15,000 Hz with no more than 5% THD. Maximum power output. 50 W 4 Load impedance.. 4 W (W allowable) Preout max output level/output impedance... 2.2 V/1 kW Equalizer (3-Band Parametric Equalizer): Low Frequency. 40/80/100/160 Hz Q Factor.. 0.35/0.59/0.95/1.15 (+6 dB when boosted) Gain.. 12dB Mid Frequency. 200/500/1k/2k Hz Q Factor.. 0.35/0.59/0.95/1.15 (+6 dB when boosted) Gain.. 12dB High Frequency. 3.15k/8k/10k/12.5k Hz Q Factor.. 0.35/0.59/0.95/1.15 (+6 dB when boosted) Gain.. 12dB Loudness contour Low.. +3.5 dB (100 Hz), +3 dB (10 kHz) Mid.. +10 dB (100 Hz), +6.5 dB (10 kHz) High.. +11 dB (100 Hz), +11 dB (10 kHz) (volume: 30 dB)

Operation Manual $
7 inch Wide AV System Display 7xX @t AV \ t

English

AVX-P7650TV

Contents

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference.
Precautions IMPORTANT SAFEGUARDS 3 To ensure safe driving 3 To avoid battery exhaustion 3 Before You Start About this unit 4 About this manual 4 Precautions 4 To protect the LCD screen 4 For viewing LCD comfortably 4 Switching the operation mode 4 Resetting the microprocessor 5 Use and care of the remote control 5 Whats What Display unit 6 Remote control 7 Basic Operations Turning the unit on and selecting a source 8 Adjusting the built-in speaker volume 8 Turning the built-in speaker output on or off 9 Adjusting the head unit volume 9 Turning the unit off 9 Opening and closing the LCD panel 9 Changing the wide screen mode 10 Adjusting the picture adjustment 11 TV tuner (SOURCE mode (S)) Whats What 13 Watching the television 14 Storing the strongest broadcast stations sequentially 14 Storing and recalling broadcast stations 15 TV tuner Watching the television 16 Storing the strongest broadcast stations sequentially 17 Recalling broadcast stations 17 Multi-CD Player Listening to a CD 18 50-disc multi-CD player 18 Introduction of advanced multi-CD player operation 19 Repeating play 19 Playing tracks in a random order 19 Scanning CDs and tracks 20 Pausing CD playback 20 Using ITS playlists 20 Using disc title functions 21 Using CD TEXT functions 22 Using compression and bass emphasis 23 DVD Player Playing a disc 24 Selecting a disc 24 Introduction of advanced DVD player operation 25 Repeating play 25 Pausing disc playback 25 Playing tracks in a random order 26 Scanning tracks of a CD 26 Using ITS playlists 26 Using disc title functions 26 Other Functions Introduction of setup adjustments 27 Setting the video input Setting the video input Setting the automatic open function 28 Setting the clock 29 Switching the auxiliary setting 30 Using the AUX source 30 Switching the background display 31 Additional Information Troubleshooting 32 Using the display correctly 33 Specifications 35

Section

Precautions

IMPORTANT SAFEGUARDS

Please read all of these instructions regarding your display and retain them for future reference.

To ensure safe driving

! LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE. ! To avoid the risk of accident and the potential violation of applicable laws, the front DVD or TV feature should never be used while the vehicle is being driven. Also, rear displays should not be in a location where it is a visible distraction to the driver. ! In some countries or states the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed and this units TV features should not be used.

WARNING

1 Read this manual fully and carefully before operating your display. 2 Keep this manual handy as a reference for operating procedures and safety information. 3 Pay close attention to all warnings in this manual and follow the instructions carefully. 4 Do not allow other persons to use this system until they have read and understood the operating instructions. 5 Do not install the display where it may (i) obstruct the drivers vision, (ii) impair the performance of any of the vehicles operating systems or safety features, including air bags, hazard lamp buttons or (iii) impair the drivers ability to safely operate the vehicle. 6 As with any accessory in your vehicles interior, the display should not divert your attention from the safe operation of your vehicle. If you experience difficulty in operating the system or reading the display, please park safely before making adjustments. 7 Do not attempt to install or service your display by yourself. Installation or servicing of the display by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards and can cause damage to the system that is not covered by warranty. 8 Please remember to wear your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled. 9 Never use headphones while driving.

c CHANNEL button Press to do manual seek tuning. d ANGLE (+/) button Press to change the LCD panel angle. e VOLUME button Press to increase or decrease the built-in speaker volume. f AV SOURCE button This unit is turned on by selecting a source. Press to cycle through all the available sources. g Built-in speaker Outputs the sound of television or other sources.
m A.MENU button Press to display MENU. Also used for selecting functions.

Remote control

h VOLUME buttons Press to increase or decrease the volume. ! You can adjust both the built-in speaker volume and the head unit volume by using AVX/H.U. i a/b/c/d buttons Press to do manual seek tuning. Also used for controlling functions. j BACK button Press to return to the previous display. k AVX/H.U button Press and hold to switch VOLUME operation. (Refer to Adjusting the head unit volume on page 9.) l BAND/ESC button Press to cancel the control mode of functions.

Basic Operations

Turning the unit on and selecting a source

MASTER mode (M)

% Press AV SOURCE to select a source. Press AV SOURCE repeatedly to switch between the following sources: TV (television)AV-1 (video input 1)AV-2 (video input 2)S-DVD (DVD player/multiDVD player)M-CD (multi-CD player)EXT-1 (external unit 1)EXT-2 (external unit 2) AUX (AUX)
Notes ! In the following cases, the sound source will not change: When there is no unit corresponding to the selected source connected to this unit. When there is no disc in the DVD player. When there is no magazine in the multiCD player. When there is no magazine in the multiDVD player. When the AUX (auxiliary input) is set to off (refer to page 30). When AV INPUT1 (video input 1) and/or AV INPUT2 (video input 2) are not set to VIDEO (refer to page 27). ! External unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two external units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by this unit.
1 Source icon Shows which source has been selected.

SOURCE mode (S)

1 Select TV or AV as a source on your head unit. Refer to the head unit operation manual.
! When you select TV, there is no need to take the following procedure. ! When connecting a head unit which does not feature an AV source, select a external unit as a source on your head unit.

2 Press AV SOURCE to select a video source. Press AV SOURCE repeatedly to switch between the following sources: AV-1 (video input 1)AV-2 (video input 2)
Note In the following cases, the sound source will not change: ! When there is no unit corresponding to the selected source connected to this unit. ! When AV INPUT1 (video input 1) and/or AV INPUT2 (video input 2) are not set to VIDEO (refer to page 27).
Adjusting the built-in speaker volume
% Press VOLUME to adjust the built-in speaker volume.
Turning the built-in speaker output on or off
% Press SPEAKER to turn the built-in speaker output off. OFF appears in the display.
Opening and closing the LCD panel
The LCD panel will be opened or closed automatically with the turning of the ignition switch on or off. You can turn off the automatic close/open function. (Refer to page 28.) ! Do not close the LCD panel with hands by force. That cause malfunction. ! The automatic close/open function will operate the display as follows. When the ignition switch is turned OFF while the LCD panel is opened, the LCD panel will close after six seconds. When the ignition switch is turned ON again (or turned to ACC), the LCD panel will be opened automatically. ! When the ignition switch is turned OFF after the LCD panel has been closed, turning the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In this case, press OPEN/CLOSE to open the LCD panel. ! When closing the LCD panel, check to make sure that it has closed completely. If the LCD panel has stopped halfway, leaving it like this could result in damage. % Press OPEN/CLOSE to open the LCD panel.
# To turn the built-in speaker output on, press SPEAKER again. Built-in speaker output is now on and AUDIO appears in the display.
Adjusting the head unit volume
You can adjust the head unit volume by VOLUME on the supplied remote control. 1 Press AVX/H.U and hold to switch VOLUME operation. It enables VOLUME on the remote control to adjust the head unit volume.
# To enable VOLUME to adjust the built-in speaker volume, press AVX/H.U and hold again.
2 Press VOLUME on the remote control to adjust the volume.

Turning the unit off

# If you press AV SOURCE and hold to turn this unit off, Power off (POWER OFF) appears on the head units display.
# To close the LCD panel, press OPEN/CLOSE again.
% Turn this unit off from your head unit. Refer to the head unit operation manual.
Adjusting the LCD panel angle

! Different settings can be memorized for each video source. ! When video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear different. ! Remember that using the wide mode feature of this system for commercial or public viewing purposes may constitute an infringement on the authors rights protected by the Copyright Law. ! Video will appear grainy when viewed in CINEMA or ZOOM mode. ! The rear view camera picture is always FULL.
Adjusting the picture adjustment
You can adjust BRIGHT (brightness), CONTRAST (contrast), COLOR (color) and HUE (hue) for each source and rear view camera. ! The adjustments of BRIGHT and CONTRAST are stored separately for light ambient (daytime) and dark ambient (nighttime). A sun or moon is displayed to the left of BRIGHT and CONTRAST, respectively, as the ambient light sensor determines brightness or darkness. ! You cannot adjust HUE for PAL video. ! You cannot adjust COLOR or HUE for the audio source. ! This unit detects whether your vehicles parking brake is engaged or not, and prevents you from adjusting the picture adjustment while driving. When you attempt to adjust the picture adjustment, the warning YOU CANNOT USE THIS FUNCTION WHILE DRIVING will appear on the display and indicate that the picture adjustment cannot be used. 1 Press V.ADJ and hold to display PICTURE ADJUST. Press V.ADJ until PICTURE ADJUST appears in the display. 2 Use a, b and A.MENU to select the function to be adjusted. Press a/b to change the function; press A.MENU to select the function. The adjustment function names are displayed and adjustable ones are highlighted.

! ! ! !

! BACK-CAMERA Switch to the picture adjustment display for the rear view camera ! SOURCE Return to the picture adjustment display for each source # You can adjust the picture adjustment for rear view camera only when B. CAMERA is turned on. (Refer to Setting for rear view camera on page 28.) # SOURCE will appear in the display instead of BACK-CAMERA when you select BACK-CAMERA. # With some rear view cameras, picture adjustment may not be possible.
3 Press c or d to adjust the selected item. Each press of c or d increases or decreases the level of selected item. +is displayed as the level is increased or decreased. 4 Press BAND/ESC to return to the display of each source.

Adjusting the dimmer

The adjustment of DIMMER is stored separately for each ambient light; daytime, evening and nighttime. The brightness of LCD screen will be adjusted to optimum level automatically in accordance with the ambient light based on the setting values. 1 Press V.ADJ and hold to display PICTURE ADJUST. Press V.ADJ until PICTURE ADJUST appears in the display. 2 Press a or b to select DIMMER. The ambient light level used as the standard for adjusting DIMMER appears above the level bar.

! Yellow sun Adjust the brightness for bright ambient light (daytime) ! Red sun Adjust the brightness for intermediate brightness (evening) ! Blue moon Adjust the brightness for dark ambient light (nighttime)
BRIGHT Adjust the black intensity CONTRAST Adjust the contrast COLOR Adjust the color saturation HUE Adjust the tone of color (red is emphasized or green is emphasized) ! DIMMER Adjust the brightness of display
3 Press c or d to adjust the brightness. Each press of c or d moves yellow towards the left or the right. The level indicates the brightness of the screen being adjusted. The farther yellow moves to the right, the brighter the screen. 4 Press BAND/ESC to return to the display of each source.
Note The icons indicating the current ambient brightness used for adjusting BRIGHT and CONTRAST may differ from DIMMER slightly.
TV tuner (SOURCE mode (S))
Only when using this unit with SOURCE mode (S), you can perform the following operations by head unit.
Operating with different head units

Head unit group 1

When using the following head units, operation is the same as with DVH-P5650MP. Operate following the instructions in this manual. DVH-P5050MP, DVH-P7050, DEH-P9650MP, DEH-P7650MP, DEH-P5650MP, DEH-P4690MP, DEH-P4650MP, DEH-P2650, DEH-P7550MP, DEH-P6550, DEH-P5550MP, DEH-P4550, DEHP3550MP, DEH-P2550, DEH-P8450MP, DEHP7450MP, DEH-P6450, DEH-P5450 (B), KEHP7035, KEH-P7025, FH-P5000MP, FH-P6200, FH-P6100, FH-P4100
Head unit (e.g., DVH-P5650MP)
Operate this unit (for TV reception) with the connected head unit. Instructions in this manual use DVH-P5650MP as an example of head unit. 1 BAND button Press to select among two TV bands and to cancel the control mode of functions. 2 F (function) button Press to select functions. 3 a/b/c/d buttons Press to do manual seek tuning. Also used for controlling functions. buttons Press for preset tuning. 5 SOURCE button This unit is turned on by selecting a source. Press to cycle through all the available sources.

Head unit group 2

When using the following head units, operation is different from DVH-P5650MP. Operate following the instructions in the head units manual. DEH-P8650MP, DEH-P9450MP, DEH-P1Y, AXMP7650, FH-P9200MP, FH-P8900MD

Watching the television

Storing the strongest broadcast stations sequentially
BSSM (best stations sequential memory) lets you automatically store the 12 strongest broadcast stations in order from the lowest channel up. 1 Function display Shows the function names. 1 Press F to select BSSM. BSSM appears on the display. 2 Press a to turn BSSM on. BSSM begins to flash. While BSSM is flashing the 12 strongest broadcast stations will be stored in order from the lowest channel up. When finished, BSSM stops flashing.

50-disc multi-CD player

Only those functions described in this manual are supported for 50-disc multi-CD players. This unit is not designed to operate disc title list functions with a 50-disc multi-CD player.
Introduction of advanced multi-CD player operation
If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display.

Repeating play

1 Function display Shows the function names. 1 Press A.MENU to display MENU. FUNCTION and SETUP appear on the display. 2 Use a, b and A.MENU to select FUNCTION. Press a/b to change the menu option; press A.MENU to select the menu option. The menu option selected with a/b is displayed with a frame. The function names are displayed and operable ones are highlighted. 3 Use a, b, c, d and A.MENU to select the desired function. Press a/b/c/d to change the function; press A.MENU to select the function. The function selected with a/b/c/d is displayed with a frame. There are three repeat play ranges for the multi-CD player: M-CD (multi-CD player repeat), TRACK (one-track repeat) and DISC (disc repeat). 1 Use a, b, c, d and A.MENU to select REPEAT. 2
! M-CD Repeat all discs in the multi-CD player ! TRACK Repeat just the current track ! DISC Repeat the current disc Notes ! If you select other discs during repeat play, the repeat play range changes to M-CD. ! If you perform track search or fast forward/reverse during TRACK, the repeat play range changes to DISC.
Press c or d to select the repeat range.
# To go to the next group of function names, press c to select NEXT and then press A.MENU. # To return to the previous group of function names, press c to select PREV and then press A.MENU. # To return to the previous display, press BACK. # To return to the display of each source, press BAND/ESC.
Playing tracks in a random order
Random play lets you play back tracks in a random order within the repeat range, M-CD and DISC. 1 Select the repeat range. Refer to Repeating play on this page. 2 Use a, b, c, d and A.MENU to select RANDOM.
3 Press a to turn random play on. Tracks will play in a random order within the previously selected M-CD or DISC ranges.

You can display the title of any disc that has had a disc title entered. % Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: DISC LIST (disc list)D.Title (disc title) When you select D.Title, the title of the currently playing disc is shown in the display.
# If no title has been entered for the currently playing disc, NO TITLE is displayed.
5 Press d to move the cursor to the next character position. When the letter you want is displayed, press d to move the cursor to the next position and then select the next letter. Press c to move backwards in the display. 6 Move the cursor to the last position by pressing d after entering the title. When you press d one more time, the entered title is stored in memory. 7 Press BAND/ESC to return to the playback display.

Using CD TEXT functions

You can use these functions only with a CD TEXT compatible multi-CD player. Some discs have certain information encoded on the disc during manufacture. These discs may contain such information as the CD title, track title, artists name and playback time and are called CD TEXT discs. Only these specially encoded CD TEXT discs support the functions listed below.
Displaying titles on CD TEXT discs
% Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings:
DISC LIST (disc list)D.Title (disc title) D.Artist (disc artist name)T.Title (track title)T.Artist (track artist name)
Using compression and bass emphasis
You can use these functions only with a multiCD player that supports them. Using COMP (compression) and DBE (dynamic bass emphasis) functions lets you adjust the sound playback quality of the multiCD player. Each of the functions has a twostep adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. DBE boosts bass levels to give playback a fuller sound. Listen to each of the effects as you select them and use the one that best enhances the playback of the track or CD that you are listening to. 1 Use a, b, c, d and A.MENU to select COMP.

# If specific information has not been recorded on a CD TEXT disc, NO XXXX will be displayed (e.g., NO ARTIST).
Scrolling titles in the display
This unit can display the first 19 letters only of D.Title, D.Artist, T.Title and T.Artist. When the recorded information is longer than 19 letters, you can scroll the text to the left so that the rest of the title can be seen. % Press DISPLAY and hold until the title begins to scroll to the left. The rest of the title will appear in the display.
Selecting tracks from the track title list
Track title list lets you see the list of track titles on a CD TEXT disc and select one of them to play back. 1 Use a, b, c, d and A.MENU to select TRACK LIST. 2 Use a, b and A.MENU to select the desired track title. Press a/b to change the track title; press A.MENU to select the track title. That selection will begin to play.
# If the multi-CD player does not support COMP/DBE, NO COMP is displayed when you attempt to select it.
2 Press c or d to select your favorite setting. Press c or d repeatedly to switch between the following settings: COMP OFFCOMP 1COMP 2 COMP OFFDBE 1DBE 2
# To go to the next group of track titles, use c, a and b to select NEXT and then press A.MENU. # To return to the previous group of track titles, use c, a and b to select PREV and then press A.MENU.

DVD Player

Playing a disc
1 Press AV SOURCE to select the DVD player. Press AV SOURCE until you see S-DVD displayed. 2 To perform fast forward or reverse, press and hold c or d. 3 To skip back or forward to another chapter/track, press c or d.
Only when using this unit with MASTER mode (M), you can perform the following operations by this unit. You can use this unit to control a DVD player or multi-DVD player, which is sold separately. For details concerning operation, refer to the DVD players or multi-DVD players operation manual. This section provides information on DVD operations with this unit which differs from that described in the DVD players or multi-DVD players operation manual. 1 Source icon Shows which source has been selected. 2 Disc type indicator Shows the type of the currently playing disc. 3 Disc number indicator Shows the disc currently playing when using a multi-DVD player. 4 Title number indicator Shows the title currently playing during DVD video playback. 5 Chapter/track number indicator Shows the chapter/track currently playing. 6 Play time indicator Shows the elapsed playing time of the current chapter/track.

Selecting a disc

! You can operate this function only when a multi-DVD player is connected to this unit. % Press a or b to select a disc.
Introduction of advanced DVD player operation

d ANGLE (+/) LCD ( | L 6. e VOLUME ` hh tp L 6. f AV SOURCE HH vh 2t (. vh (d H t 6. g ` TD H vh 7i.
h VOLUME hh tp L. ! AVX/H.U| `d 2 hh p . i a/b/c/d h L. H ( | t( . j BACK t \ D6t 6. k AVX/H.U VOLUME ph 6t . (43 t 2 h pH | 8pt 6.) l BAND/ESC ( | 6t. m A.MENU MENU| \6t. H 2 h t( .

MASTER (M)

% vh L AV SOURCE| t $. AV SOURCE| $t( tt v v t ( ): TV (TD)AV-1 (D1)AV-2 (D2)S-DVD (DVD t/@ DVD t)M-CD (@ CD t )EXT-1 (x HH 1)EXT-2 (x HH 2)AUX (AUX)
8 ! v %d vt J: 2 v |X HH HH Jd DVD t l . @ CD t X . DVD t X . AUX(p 7) ` 6! (64 t| 8pt 6). AV INPUT1 (D1)/ AV INPUT2 (D2) VIDEO 6 ! Jd (61 t| 8p t 6). ! x HH v`( Vt J | HH H Hh ( t6D (( l ( ) h i. HH P x HH | ( . P xHH , HH( ` xHH 1 xHH 2| 6!i.

1 v DtX 2 vt \).

SOURCE (S)
TV AV| v` i. 2 6(| 8pt 6.
! TV| 2t v !h h. ! AVv Ht 2 2 v` xHH| 2 i.
2 D$ vh L AV SOURCE| t$. AV SOURCE| $t( tt v v t ( ): AV-1 (D1)AV-2 (D2)
8 v %d vt J: ! 2 v |X HH HH Jd ! AV INPUT1 (D1)/ AV INPUT2 (D2) VIDEO 6! Jd (61 t| 8pt 6).

` hh pH

% VOLUMEh ` hh p i.

` 7 DH H

% ` 7h L L SPEAKER|. OFF t.

LCD ( Hd H

X| Dp (t ` LCD ( t p. H/H H d L . (63 t| 8pt 6.) ! LCD (d ` 4 6. t . ! H/H Hd t| v %t. LCD (t 6 ( X t, LCD (d 6 . X (t( ACC t), LCD (d ` . ! LCD (t X t, X| (( ACC ) LCD (d J. t , OPEN/CLOSE| LCD ( h. ! LCD (h h h $ xt 6. LCD (h H Pt t V . % OPEN/CLOSE| LCD (h $.
# ` 7h (6t SPEAKER| . ` 7t (p AUDIO t.

2 h pH

VOLUME` 2 hh p . 1 VOLUME ph 6t AVX/H.U| . 2 hh p6t VOLUMEh.
# VOLUME` ` hh p6 t AVX/H.U| .

2 hh p6t VOLUMEh.

# AV SOURCE| HH| Dt 2 t Power off (POWER OFF).
# LCD (h `6t OPEN/CLOSE| .

% 2 HH| U. 2 6(| 8pt 6.

LCD ( pH
! LCD (t ( t H$ t, ANGLE ()h LCD (h p ^` 6. ! LCD ( | p6t, ANGLE (+/)h. LCD (h ` 4 p t .

% HH| D6t AV SOURCE| $.

% LCD (h H p6t ANGLE (+/)h. ANGLE (+/)h t | LCD ( i.
FULL () 4:3 d m A` p, 4:3 TV (|$ )h ( i. JUST () d Y( } p ]` d , dt l( t 4:3 h V . CINEMA (6) d A` FULL ZOOM %d D@, A` FULL ZOOM D @ ); t " x 6 t (dt l )h p ii. ZOOM () 4:3 t A` %d D@ ); 6 t ii(d t l ). NORMAL (|) 4:3 t \p |$ D@ |H L8 t. 8 ! D6 v x 6!h H . ! D6| dt l ( tDd J` t . ! t \ dt Hh x ( H t t V' t h ht h t 6. ! D6| CINEMA ZOOM ( tt p`. ! tT| d m FULL.
# p LCD ( H v LCD (h h L, ` DS.

LCD ( ` H

LCD (t ` `t ph At ` (h |` ` . % FLIP DOWNh LCD (h `.

# X 6t FLIP DOWNh . # LCD (d p , 10 Dv h ` X D.

dt l H

4:3 h 16:9 , | 2 . % $!h 6t WIDE| $. WIDE| $t( tt v 6!t $ ` ): FULL ()JUST ()CINEMA (6 )ZOOM ()NORMAL (\)
v tT| BRIGHT ()H), CONTRAST (| ) COLOR ()d HUE (p)| p . ! BRIGHTd CONTRAST pd )d p() P p(6)` ). p `( )Hd aH| ! t t BRIGHTd CONTRAST | \ ). ! PAL D6 HUE p . ! 66 v COLOR HUE p . ! HH (t ( tl| x D p !h i. p!h t YOU CANNOT USE THIS FUNCTION WHILE DRIVINGt| 8t t p!d h L6. 1 PICTURE ADJUST| \6t V.ADJ| . PICTURE ADJUST t L v V.ADJ| 6. 2 p! Hh 6t a, b A.MENU| $. Hh 6t a/b| ; A.MENU| Hh 2i. p H tt \t p H t !p\).
# tT| p!d B. CAMERA (V h L p . (62 t tT| 6!H| 8pt 6.) # BACK-CAMERA| 2t BACK-CAMERA SOURCE t. # tT| 0|( p!h h .
3 mh p6t c d| $. c d| | L 2 m t p i. t p h 0| +24 -24 t). 4 v t D6t BAND/ESC| $.

Hp! pH

DIMMER pd p , e, 6 ` 0 ). LCD t )H 6 !X Ht( 0| ` p). 1 PICTURE ADJUST| \6t V.ADJ| . PICTURE ADJUST t L v V.ADJ| 6. 2 DIMMER| 6t a b| . DIMMER| pH \` p d .
BRIGHT ! | pi CONTRAST || pi COLOR D| pi HUE h pi(ht yt !p)) ! DIMMER t )H| pi ! BACK-CAMERA tT| p ! t| i ! SOURCE v p! t D
! x )d p )H() | pi ! h )H(e)| pi ! P p )H(6) | pi
3 H| p6t c d| $. c d| | L xt |t 6x`. d t p )H|. x t 6x` @ t tt )D. 4 v t D6t BAND/ESC| $.
8 BRIGHTd CONTRAST p )H| Dtd DIMMERd p | .

TV (SOURCE (S))

HH| SOURCE (S)@ , 2 t v ph .
5 SOURCE HH vh 2t (. vh (d H t 6.

2(, DVH-P5650MP)

2` HH(TV )| pi. t 6( hd DVHP5650MP 2h h i. 1 BAND P ( TV Rt 2 Ld H ( | L. 2 F (H) Hh 2 L 6. 3 a/b/c/d h L. H ( | t( . 6! , 6.
v 2h L, d DVHP5650MPd %. t 6( h 0| pi. DVH-P5050MP, DVH-P7050, DEHP9650MP, DEH-P7650MP, DEHP5650MP, DEH-P4690MP, DEHP4650MP, DEH-P2650, DEH-P7550MP, DEH-P6550, DEH-P5550MP, DEHP4550, DEH-P3550MP, DEH-P2550, DEH-P8450MP, DEH-P7450MP, DEHP6450, DEH-P5450 (B), KEH-P7035, KEH-P7025, FH-P5000MP, FH-P6200, FH-P6100, FH-P4100
v 2h L, Ad DVH-P5650MPd. 2 6( h 0| pi.
DEH-P8650MP, DEH-P9450MP, DEHP1Y, AXM-P7650, FH-P9200MP, FHP8900MD
\ TV R \ ). 2 D \ TV D \ ). 3 $! V \ 2 6! t \). 1 TV| 6t SOURCE| $. TV \ Lv SOURCE| 6. 2 4| 6t BAND| $. T1 T2 R \ Lv BAND| 6. 3 h 6t, c d| . Dt ` i. 4 h 6t } 1 ! c d| x v t(i. V | h ! !7 A | >h Lv ( Dh i.
# c d| h . # c d| t `t A Dh t . ( h t t ).

! )m ` H

BSSM( Am T)d d D ( d D ` 12( ! A mh ` i. 1 H t H tt \). 1 BSSMh 6t F| $. BSSMt t. 2 BSSMh 6t a| $. BSSMt xH i. BSSMt x H d D ` 12( ! Amt ). t ht BSSMt xh i.
# h 6t b| 6. 8 ! BSSMh Amh t 16 Amt . ! 30 t t Hh J`t t ` TV ` D.
% T | >X`t $! 16 | t H Lv $. 2 V 6! V \ ( x v ( 2). 2 Amd T ). %d 6! h tt T Amh 2 .
8 ! Amd 2( TV R t 6(, ) 12(v T . ! a b| 6! Dh 2 .

6! 16h tt Amh 6 (v } H , t h Amh 2 .

3 h 6t, c d| . Dt ` i.

# CHANNELh h .
4 h 6t } 1 ! c d| x v t(i. V | h ! !7 A | >h Lv ( Dh i.
HH| MASTER (M)@ , HH t v ph .
1 v DtX 2 vt \). \ TV R \ ). 3 $! V \ 2 6! t \). 4 D \ TV D \ ). 5 $! \ 6! h \i. 1 TV| 6t AV SOURCE| $. TV \ Lv AV SOURCE| 6. 2 4| 6t BAND/ESC| $. TV1 TV2 R \ Lv BAND/ESC| 6.

t t Hh J`t t ` TV ` D.

BSSM` 6! D P. CH:01P. CH:12| } 2 .
BSSM( Am T)d d D ( d D ` 12( ! A mh ` i. 1 H t H tt \). 1 MENU| \6t A.MENU| $. FUNCTION SETUPt t . 2 a, b@ A.MENU| FUNCTIONh i. Tt Sh 6t a/b| ; A.MENU| Tt Sh 2i. BSSMt t. 3 BSSMh $. 6t A.MENU|
% a b $! D P. CH:01P. CH:12| .
4 BSSMh 6t a| $. BSSMt xH i. BSSMt x H d D( d D ` 12 ( ! Amt ). t BSSMt |.

# h 6t b| 6.

@ CD t

l| b| $.

3 hH H| 6t c d| $. 4 x ` ^` tH tH| 6t c d| $. d| tt v ` t. c| tt ` t. tt t ` t.
8 ! @ CD t D |t READY \). ! @ CD t ( J`t ERROR-02 T . @ CD t 6(| 8 pt 6. ! @ CD t X l `t NO DISC \).
HH| MASTER (M)@ , HH t v ph . HH| @ CD t | ( . @ CD t CD| p h H (. CD d t ( 6i.
1 v DtX 2 vt \). 2 l V \ x l \). 3 V \ x t \). 4 \ x t \ ). 5 l \ l t h \i. 1 @ CD t| 6t AV SOURCE| $. M-CD \ Lv AV SOURCE| 6.

l 50 @ CD t

6( 6 Hd l 50 @ CD t t ). HH l 50 @ CD t l t H pd .

@ CD t ) (

t t Hh J`t t ` \ D.
@ CD t V $ ): M-CD (@ CD t $), TRACK ( $) DISC (l $). 1 a, b, c, d@ A.MENU| REPEATh i. 2 c d| |. i
1 H t H tt \). 1 MENU| \6t A.MENU| $. FUNCTION SETUPt t . 2 a, b@ A.MENU| FUNCTIONh i. Tt Sh 6t a/b| ; A.MENU| Tt Sh 2i. a/b 2 Tt Sd h \ ). H tt \ p Hd ! p\). a, b, c, d@ A.MENU Hh i. Hh 6t a/b/c/d| ; A.MENU| Hh 2i. a/b/c/d 2 Hd h \ ). 3
! M-CD @ CD t l $ ! TRACK $ ! DISC l $ 8
! $ x l| 2t $ M-CD ). ! TRACK hH/H | t $ DISC ).
4 h t h M-CDd DISC P $ ( 4 ( . 1 | i. t t $H| 8pt 6. 2 a, b, c, d@ A.MENU| RANDOMh i.
# H t v ` 6t, c| NEXT| 2 v A.MENU|. # H t t ` D6t, c| PREV| 2 v A.MENU|. # t \ D6t BACKh 6. # v \ D6t BAND/ESC| 6.
h 6t a| $. d ^( 2 M-CD DISC ( 4 ( ).

# 4 h 6t b| 6.

2 |!| 6t a| $. t |!).

# |!| 6t b| 6.

DISC| 2 l t } 10 H ). M-CD| l t } 10 H ). 1 | i. ^ t $H| 8pt 6. 2 a, b, c, d@ A.MENU| SCANh i. 3 h 6t a| $. l v 10( l ) t ). 4 ( l)h >Xh L h 6t b| $.

U t !T H

t Hd t Hh @ CD t( . COMP(U) DBE(t t !) Hh t @ CD t v h p! . H P p! . COMP Hd d h( ! v v 7 V | p!i. DBE vh H t t h p!i. t Hh 2 L H | x , x CD h ` | t 6.
6 \ x U0/ t \). 1 DVD t| 6t AV SOURCE| $. S-DVD \ Lv AV SOURCE| 6. 2 hH H| 6t c d| $.
HH| MASTER (M)@ , HH t v ph . HH| DVD t @ DVD t| ( . t V d t DVD t @ DVD t 6(| 8p6. t ( DVD t @ DVD t 6(( 6 t HH d h DVD ! | (i.
1 v DtX 2 vt \). 2 l 2! \ l 2!h . 3 l V \ @ DVD t| h x l| \i. 4 t V \ DVD D6 x t h . 5 U0/ V \ x U0/t \).
3 x U0/` tH ^` tH| 6t c d| $.
! t Hd HH @ DVD t h p . % l| $. 6t a b|

DVD t ) (

! D6 CD PBC H, t Hd p .
1 H t H tt \). 1 MENU| \6t A.MENU| $. FUNCTION SETUPt t . 2 a, b@ A.MENU| FUNCTIONh i. Tt Sh 6t a/b| ; A.MENU| Tt Sh 2i. a/b 2 Tt Sd h \ ). H tt \ p Hd ! p\). a, b, c, d@ A.MENU Hh i. Hh 6t a/b/c/d| ; A.MENU| Hh 2i. a/b/c/d 2 Hd h \ ). a, b, c, d@ A.MENU| REPEATh i. 2 c d| |. DVD D$ H i

D$ CD CD H

! TRACK $ ! DISC l $ 8
! TITLE t $ ! CHAPTER U0 $ ! DISC l $
! $ x l| 2t $ DISC ). ! TRACK hH/H | t $ DISC ).
1 a, b, c, d@ A.MENU| PAUSE| i. 2 |!| 6t a| $.
! CD t Hh p . 1 a, b, c, d@ A.MENU| RANDOMh i. h 6t a| $. t 4 ( ).
l t 7d @ DVD t CD th 108v 7 . V d 55 t l t H H| 8pt 6. ! t Hd HH @ DVD t h p .
! CD t Hh p . 1 a, b, c, d@ A.MENU| SCAN| i. 2 h 6t a| $. v 10 ). 3 h >d , h 6t b| $.
! t Hd HH @ DVD t h p . ! t Hd @ CD t ITS p. @ DVD t , ITS d CD ). V d 54 t ITS H| 8pt 6.

$! p! ) (

1 MENU| \6t A.MENU| $. FUNCTION SETUPt t . 2 a, b@ A.MENU| SETUPh i. Tt Sh 6t a/b| ; A.MENU| Tt Sh 2i. a/b 2 Tt Sd h \ ). H tt \ p Hd ! p\). a, b, c, d@ A.MENU Hh i. Hh 6t a/b/c/d| ; A.MENU| Hh 2i. a/b/c/d 2 Hd h \ ). 3

1 $! Tt \ 6! H tt \).

1 MENU| \6t A.MENU| $. H tt \ p Hd ! p\). a, b, c, d@ A.MENU Hh i. Hh 6t a/b/c/d| ; A.MENU| Hh 2i. a/b/c/d 2 Hd h \ ). 2
# t \ D6t BACKh 6. # v \ D6t BAND/ESC| 6. 8
6! Hh 30 t J`t t ` v \ D.

D1 $!H

0| 6!h . ! AV-1 D6| 6t VIDEO| 2i. ! t6D DVD 2 D 6| 6t DVD| 2i. ! S-DVD v` DVD t D6| 6t M-DVD| 2i.
1 a, b, c, d@ A.MENU| AV INPUT1| i. 2 D$ $!h 6t c d| $. 6!t t Lv c d| 6.

tT| $!H

t$D p D\ t| 7 tT|| H| i. J`t t p .
! OFF D6 JX ! VIDEO x D6 ! DVD t6D DVD 2(, DVH-P5650MP) ! M-DVD RCA t DVD t # HH| SOURCE (S)d , DVD| 2 . # HH| MASTER (M)d , M-DVD| 2 .

Published by Pioneer Corporation. Copyright 2004 by Pioneer Corporation. All rights reserved. t$D 2004 t $D h. Printed in Japan | x
<KMMZF> <04E00000>

<CRD3886-A> ES